| # SPDX-License-Identifier: GPL-2.0-only |
| # |
| # Platform drivers |
| # Most drivers here are currently for webcam support |
| |
| menuconfig V4L_PLATFORM_DRIVERS |
| bool "V4L platform devices" |
| help |
| Say Y here to enable support for platform-specific V4L drivers. |
| |
| if V4L_PLATFORM_DRIVERS |
| |
| source "drivers/media/platform/marvell-ccic/Kconfig" |
| |
| config VIDEO_VIA_CAMERA |
| tristate "VIAFB camera controller support" |
| depends on FB_VIA && VIDEO_V4L2 |
| select VIDEOBUF2_DMA_SG |
| select VIDEO_OV7670 |
| help |
| Driver support for the integrated camera controller in VIA |
| Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems |
| with ov7670 sensors. |
| |
| # |
| # Platform multimedia device configuration |
| # |
| source "drivers/media/platform/cadence/Kconfig" |
| |
| source "drivers/media/platform/davinci/Kconfig" |
| |
| source "drivers/media/platform/omap/Kconfig" |
| |
| config VIDEO_ASPEED |
| tristate "Aspeed AST2400 and AST2500 Video Engine driver" |
| depends on VIDEO_V4L2 |
| select VIDEOBUF2_DMA_CONTIG |
| help |
| Support for the Aspeed Video Engine (VE) embedded in the Aspeed |
| AST2400 and AST2500 SOCs. The VE can capture and compress video data |
| from digital or analog sources. |
| |
| config VIDEO_SH_VOU |
| tristate "SuperH VOU video output driver" |
| depends on VIDEO_DEV && I2C |
| depends on ARCH_SHMOBILE || COMPILE_TEST |
| select VIDEOBUF2_DMA_CONTIG |
| help |
| Support for the Video Output Unit (VOU) on SuperH SoCs. |
| |
| config VIDEO_VIU |
| tristate "Freescale VIU Video Driver" |
| depends on VIDEO_V4L2 && (PPC_MPC512x || COMPILE_TEST) && I2C |
| select VIDEOBUF_DMA_CONTIG |
| default y |
| help |
| Support for Freescale VIU video driver. This device captures |
| video data, or overlays video on DIU frame buffer. |
| |
| Say Y here if you want to enable VIU device on MPC5121e Rev2+. |
| In doubt, say N. |
| |
| config VIDEO_MUX |
| tristate "Video Multiplexer" |
| select MULTIPLEXER |
| depends on VIDEO_V4L2 && OF |
| select MEDIA_CONTROLLER |
| select VIDEO_V4L2_SUBDEV_API |
| select REGMAP |
| select V4L2_FWNODE |
| help |
| This driver provides support for N:1 video bus multiplexers. |
| |
| config VIDEO_OMAP3 |
| tristate "OMAP 3 Camera support" |
| depends on VIDEO_V4L2 && I2C |
| depends on (ARCH_OMAP3 && OMAP_IOMMU) || COMPILE_TEST |
| depends on COMMON_CLK && OF |
| select ARM_DMA_USE_IOMMU if OMAP_IOMMU |
| select MEDIA_CONTROLLER |
| select VIDEO_V4L2_SUBDEV_API |
| select VIDEOBUF2_DMA_CONTIG |
| select MFD_SYSCON |
| select V4L2_FWNODE |
| help |
| Driver for an OMAP 3 camera controller. |
| |
| config VIDEO_OMAP3_DEBUG |
| bool "OMAP 3 Camera debug messages" |
| depends on VIDEO_OMAP3 |
| help |
| Enable debug messages on OMAP 3 camera controller driver. |
| |
| config VIDEO_PXA27x |
| tristate "PXA27x Quick Capture Interface driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on PXA27x || COMPILE_TEST |
| select VIDEOBUF2_DMA_SG |
| select SG_SPLIT |
| select V4L2_FWNODE |
| help |
| This is a v4l2 driver for the PXA27x Quick Capture Interface |
| |
| config VIDEO_QCOM_CAMSS |
| tristate "Qualcomm V4L2 Camera Subsystem driver" |
| depends on VIDEO_V4L2 |
| depends on (ARCH_QCOM && IOMMU_DMA) || COMPILE_TEST |
| select MEDIA_CONTROLLER |
| select VIDEO_V4L2_SUBDEV_API |
| select VIDEOBUF2_DMA_SG |
| select V4L2_FWNODE |
| |
| config VIDEO_S3C_CAMIF |
| tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver" |
| depends on VIDEO_V4L2 && I2C && PM |
| depends on ARCH_S3C64XX || PLAT_S3C24XX || COMPILE_TEST |
| select MEDIA_CONTROLLER |
| select VIDEO_V4L2_SUBDEV_API |
| select VIDEOBUF2_DMA_CONTIG |
| help |
| This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera |
| host interface (CAMIF). |
| |
| To compile this driver as a module, choose M here: the module |
| will be called s3c-camif. |
| |
| config VIDEO_STM32_DCMI |
| tristate "STM32 Digital Camera Memory Interface (DCMI) support" |
| depends on VIDEO_V4L2 && OF |
| depends on ARCH_STM32 || COMPILE_TEST |
| select VIDEOBUF2_DMA_CONTIG |
| select MEDIA_CONTROLLER |
| select V4L2_FWNODE |
| help |
| This module makes the STM32 Digital Camera Memory Interface (DCMI) |
| available as a v4l2 device. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called stm32-dcmi. |
| |
| config VIDEO_RENESAS_CEU |
| tristate "Renesas Capture Engine Unit (CEU) driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on ARCH_SHMOBILE || ARCH_R7S72100 || COMPILE_TEST |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_FWNODE |
| help |
| This is a v4l2 driver for the Renesas CEU Interface |
| |
| config VIDEO_ROCKCHIP_ISP1 |
| tristate "Rockchip Image Signal Processing v1 Unit driver" |
| depends on VIDEO_V4L2 && OF |
| depends on ARCH_ROCKCHIP || COMPILE_TEST |
| select MEDIA_CONTROLLER |
| select VIDEO_V4L2_SUBDEV_API |
| select VIDEOBUF2_DMA_CONTIG |
| select VIDEOBUF2_VMALLOC |
| select V4L2_FWNODE |
| select GENERIC_PHY_MIPI_DPHY |
| default n |
| help |
| Enable this to support the Image Signal Processing (ISP) module |
| present in RK3399 SoCs. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called rockchip-isp1. |
| |
| source "drivers/media/platform/exynos4-is/Kconfig" |
| source "drivers/media/platform/am437x/Kconfig" |
| source "drivers/media/platform/xilinx/Kconfig" |
| source "drivers/media/platform/rcar-vin/Kconfig" |
| source "drivers/media/platform/atmel/Kconfig" |
| source "drivers/media/platform/sunxi/Kconfig" |
| |
| config VIDEO_TI_CAL |
| tristate "TI CAL (Camera Adaptation Layer) driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| select MEDIA_CONTROLLER |
| select VIDEO_V4L2_SUBDEV_API |
| depends on SOC_DRA7XX || ARCH_K3 || COMPILE_TEST |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_FWNODE |
| help |
| Support for the TI CAL (Camera Adaptation Layer) block |
| found on DRA72X SoC. |
| In TI Technical Reference Manual this module is referred as |
| Camera Interface Subsystem (CAMSS). |
| |
| endif # V4L_PLATFORM_DRIVERS |
| |
| menuconfig V4L_MEM2MEM_DRIVERS |
| bool "Memory-to-memory multimedia devices" |
| depends on VIDEO_V4L2 |
| help |
| Say Y here to enable selecting drivers for V4L devices that |
| use system memory for both source and destination buffers, as opposed |
| to capture and output drivers, which use memory buffers for just |
| one of those. |
| |
| if V4L_MEM2MEM_DRIVERS |
| |
| config VIDEO_CODA |
| tristate "Chips&Media Coda multi-standard codec IP" |
| depends on VIDEO_DEV && VIDEO_V4L2 && OF && (ARCH_MXC || COMPILE_TEST) |
| select SRAM |
| select VIDEOBUF2_DMA_CONTIG |
| select VIDEOBUF2_VMALLOC |
| select V4L2_JPEG_HELPER |
| select V4L2_MEM2MEM_DEV |
| select GENERIC_ALLOCATOR |
| help |
| Coda is a range of video codec IPs that supports |
| H.264, MPEG-4, and other video formats. |
| |
| config VIDEO_IMX_VDOA |
| def_tristate VIDEO_CODA if SOC_IMX6Q || COMPILE_TEST |
| |
| config VIDEO_IMX_PXP |
| tristate "i.MX Pixel Pipeline (PXP)" |
| depends on VIDEO_DEV && VIDEO_V4L2 && (ARCH_MXC || COMPILE_TEST) |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| help |
| The i.MX Pixel Pipeline is a memory-to-memory engine for scaling, |
| color space conversion, and rotation. |
| |
| config VIDEO_MEDIATEK_JPEG |
| tristate "Mediatek JPEG Codec driver" |
| depends on MTK_IOMMU_V1 || MTK_IOMMU || COMPILE_TEST |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on ARCH_MEDIATEK || COMPILE_TEST |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| help |
| Mediatek jpeg codec driver provides HW capability to decode |
| JPEG format |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mtk-jpeg |
| |
| config VIDEO_MEDIATEK_VPU |
| tristate "Mediatek Video Processor Unit" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on ARCH_MEDIATEK || COMPILE_TEST |
| help |
| This driver provides downloading VPU firmware and |
| communicating with VPU. This driver for hw video |
| codec embedded in Mediatek's MT8173 SOCs. It is able |
| to handle video decoding/encoding in a range of formats. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mtk-vpu. |
| |
| config VIDEO_MEDIATEK_MDP |
| tristate "Mediatek MDP driver" |
| depends on MTK_IOMMU || COMPILE_TEST |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on ARCH_MEDIATEK || COMPILE_TEST |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| select VIDEO_MEDIATEK_VPU |
| help |
| It is a v4l2 driver and present in Mediatek MT8173 SoCs. |
| The driver supports for scaling and color space conversion. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mtk-mdp. |
| |
| config VIDEO_MEDIATEK_VCODEC |
| tristate "Mediatek Video Codec driver" |
| depends on MTK_IOMMU || COMPILE_TEST |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on ARCH_MEDIATEK || COMPILE_TEST |
| depends on VIDEO_MEDIATEK_VPU || MTK_SCP |
| # The two following lines ensure we have the same state ("m" or "y") as |
| # our dependencies, to avoid missing symbols during link. |
| depends on VIDEO_MEDIATEK_VPU || !VIDEO_MEDIATEK_VPU |
| depends on MTK_SCP || !MTK_SCP |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| select VIDEO_MEDIATEK_VCODEC_VPU if VIDEO_MEDIATEK_VPU |
| select VIDEO_MEDIATEK_VCODEC_SCP if MTK_SCP |
| help |
| Mediatek video codec driver provides HW capability to |
| encode and decode in a range of video formats on MT8173 |
| and MT8183. |
| |
| Note that support for MT8173 requires VIDEO_MEDIATEK_VPU to |
| also be selected. Support for MT8183 depends on MTK_SCP. |
| |
| To compile this driver as modules, choose M here: the |
| modules will be called mtk-vcodec-dec and mtk-vcodec-enc. |
| |
| config VIDEO_MEDIATEK_VCODEC_VPU |
| bool |
| |
| config VIDEO_MEDIATEK_VCODEC_SCP |
| bool |
| |
| config VIDEO_MEM2MEM_DEINTERLACE |
| tristate "Deinterlace support" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on HAS_DMA |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| help |
| Generic deinterlacing V4L2 driver. |
| |
| config VIDEO_MESON_GE2D |
| tristate "Amlogic 2D Graphic Acceleration Unit" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on ARCH_MESON || COMPILE_TEST |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| help |
| This is a v4l2 driver for Amlogic GE2D 2D graphics accelerator. |
| GE2D is a standalone 2D graphic acceleration unit, with color converter, |
| image scaling, BitBLT & alpha blending operations. |
| |
| To compile this driver as a module choose m here. |
| |
| config VIDEO_SAMSUNG_S5P_G2D |
| tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| help |
| This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D |
| 2d graphics accelerator. |
| |
| config VIDEO_SAMSUNG_S5P_JPEG |
| tristate "Samsung S5P/Exynos3250/Exynos4 JPEG codec driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| help |
| This is a v4l2 driver for Samsung S5P, EXYNOS3250 |
| and EXYNOS4 JPEG codec |
| |
| config VIDEO_SAMSUNG_S5P_MFC |
| tristate "Samsung S5P MFC Video Codec" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST |
| select VIDEOBUF2_DMA_CONTIG |
| help |
| MFC 5.1 and 6.x driver for V4L2 |
| |
| config VIDEO_MX2_EMMAPRP |
| tristate "MX2 eMMa-PrP support" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on SOC_IMX27 || COMPILE_TEST |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| help |
| MX2X chips have a PrP that can be used to process buffers from |
| memory to memory. Operations include resizing and format |
| conversion. |
| |
| config VIDEO_SAMSUNG_EXYNOS_GSC |
| tristate "Samsung Exynos G-Scaler driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on ARCH_EXYNOS || COMPILE_TEST |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| help |
| This is a v4l2 driver for Samsung EXYNOS5 SoC G-Scaler. |
| |
| config VIDEO_STI_BDISP |
| tristate "STMicroelectronics BDISP 2D blitter driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on ARCH_STI || COMPILE_TEST |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| help |
| This v4l2 mem2mem driver is a 2D blitter for STMicroelectronics SoC. |
| |
| config VIDEO_STI_HVA |
| tristate "STMicroelectronics HVA multi-format video encoder V4L2 driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on ARCH_STI || COMPILE_TEST |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| help |
| This V4L2 driver enables HVA (Hardware Video Accelerator) multi-format |
| video encoder of STMicroelectronics SoC, allowing hardware encoding of |
| raw uncompressed formats in various compressed video bitstreams format. |
| |
| To compile this driver as a module, choose M here: |
| the module will be called st-hva. |
| |
| config VIDEO_STI_HVA_DEBUGFS |
| bool "Export STMicroelectronics HVA internals in debugfs" |
| depends on VIDEO_STI_HVA |
| depends on DEBUG_FS |
| help |
| Select this to see information about the internal state and the last |
| operation of STMicroelectronics HVA multi-format video encoder in |
| debugfs. |
| |
| Choose N unless you know you need this. |
| |
| config VIDEO_STI_DELTA |
| tristate "STMicroelectronics DELTA multi-format video decoder V4L2 driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on ARCH_STI || COMPILE_TEST |
| help |
| This V4L2 driver enables DELTA multi-format video decoder |
| of STMicroelectronics STiH4xx SoC series allowing hardware |
| decoding of various compressed video bitstream format in |
| raw uncompressed format. |
| |
| Use this option to see the decoders available for such |
| hardware. |
| |
| Please notice that the driver will only be built if |
| at least one of the DELTA decoder below is selected. |
| |
| if VIDEO_STI_DELTA |
| |
| config VIDEO_STI_DELTA_MJPEG |
| bool "STMicroelectronics DELTA MJPEG support" |
| default y |
| help |
| Enables DELTA MJPEG hardware support. |
| |
| To compile this driver as a module, choose M here: |
| the module will be called st-delta. |
| |
| config VIDEO_STI_DELTA_DRIVER |
| tristate |
| depends on VIDEO_STI_DELTA |
| depends on VIDEO_STI_DELTA_MJPEG |
| default VIDEO_STI_DELTA_MJPEG |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| select RPMSG |
| |
| endif # VIDEO_STI_DELTA |
| |
| config VIDEO_RENESAS_FDP1 |
| tristate "Renesas Fine Display Processor" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on ARCH_RENESAS || COMPILE_TEST |
| depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| help |
| This is a V4L2 driver for the Renesas Fine Display Processor |
| providing colour space conversion, and de-interlacing features. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called rcar_fdp1. |
| |
| config VIDEO_RENESAS_JPU |
| tristate "Renesas JPEG Processing Unit" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on ARCH_RENESAS || COMPILE_TEST |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| help |
| This is a V4L2 driver for the Renesas JPEG Processing Unit. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called rcar_jpu. |
| |
| config VIDEO_RENESAS_FCP |
| tristate "Renesas Frame Compression Processor" |
| depends on ARCH_RENESAS || COMPILE_TEST |
| depends on OF |
| help |
| This is a driver for the Renesas Frame Compression Processor (FCP). |
| The FCP is a companion module of video processing modules in the |
| Renesas R-Car Gen3 and RZ/G2 SoCs. It handles memory access for |
| the codec, VSP and FDP modules. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called rcar-fcp. |
| |
| config VIDEO_RENESAS_VSP1 |
| tristate "Renesas VSP1 Video Processing Engine" |
| depends on VIDEO_V4L2 |
| depends on ARCH_RENESAS || COMPILE_TEST |
| depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP |
| select MEDIA_CONTROLLER |
| select VIDEO_V4L2_SUBDEV_API |
| select VIDEOBUF2_DMA_CONTIG |
| select VIDEOBUF2_VMALLOC |
| help |
| This is a V4L2 driver for the Renesas VSP1 video processing engine. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called vsp1. |
| |
| config VIDEO_ROCKCHIP_RGA |
| tristate "Rockchip Raster 2d Graphic Acceleration Unit" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on ARCH_ROCKCHIP || COMPILE_TEST |
| select VIDEOBUF2_DMA_SG |
| select V4L2_MEM2MEM_DEV |
| help |
| This is a v4l2 driver for Rockchip SOC RGA 2d graphics accelerator. |
| Rockchip RGA is a separate 2D raster graphic acceleration unit. |
| It accelerates 2D graphics operations, such as point/line drawing, |
| image scaling, rotation, BitBLT, alpha blending and image blur/sharpness. |
| |
| To compile this driver as a module choose m here. |
| |
| config VIDEO_TI_VPE |
| tristate "TI VPE (Video Processing Engine) driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on SOC_DRA7XX || COMPILE_TEST |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| select VIDEO_TI_VPDMA |
| select VIDEO_TI_SC |
| select VIDEO_TI_CSC |
| help |
| Support for the TI VPE(Video Processing Engine) block |
| found on DRA7XX SoC. |
| |
| config VIDEO_TI_VPE_DEBUG |
| bool "VPE debug messages" |
| depends on VIDEO_TI_VPE |
| help |
| Enable debug messages on VPE driver. |
| |
| config VIDEO_QCOM_VENUS |
| tristate "Qualcomm Venus V4L2 encoder/decoder driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on (ARCH_QCOM && IOMMU_DMA) || COMPILE_TEST |
| depends on INTERCONNECT || !INTERCONNECT |
| select QCOM_MDT_LOADER if ARCH_QCOM |
| select QCOM_SCM if ARCH_QCOM |
| select VIDEOBUF2_DMA_SG |
| select V4L2_MEM2MEM_DEV |
| help |
| This is a V4L2 driver for Qualcomm Venus video accelerator |
| hardware. It accelerates encoding and decoding operations |
| on various Qualcomm SoCs. |
| To compile this driver as a module choose m here. |
| |
| config VIDEO_SUN8I_DEINTERLACE |
| tristate "Allwinner Deinterlace driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on ARCH_SUNXI || COMPILE_TEST |
| depends on COMMON_CLK && OF |
| depends on PM |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| help |
| Support for the Allwinner deinterlace unit with scaling |
| capability found on some SoCs, like H3. |
| To compile this driver as a module choose m here. |
| |
| config VIDEO_SUN8I_ROTATE |
| tristate "Allwinner DE2 rotation driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on ARCH_SUNXI || COMPILE_TEST |
| depends on COMMON_CLK && OF |
| depends on PM |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| help |
| Support for the Allwinner DE2 rotation unit. |
| To compile this driver as a module choose m here. |
| |
| endif # V4L_MEM2MEM_DRIVERS |
| |
| # TI VIDEO PORT Helper Modules |
| # These will be selected by VPE and VIP |
| config VIDEO_TI_VPDMA |
| tristate |
| |
| config VIDEO_TI_SC |
| tristate |
| |
| config VIDEO_TI_CSC |
| tristate |
| |
| menuconfig DVB_PLATFORM_DRIVERS |
| bool "DVB platform devices" |
| depends on MEDIA_DIGITAL_TV_SUPPORT |
| help |
| Say Y here to enable support for platform-specific Digital TV drivers. |
| |
| if DVB_PLATFORM_DRIVERS |
| source "drivers/media/platform/sti/c8sectpfe/Kconfig" |
| endif #DVB_PLATFORM_DRIVERS |
| |
| menuconfig SDR_PLATFORM_DRIVERS |
| bool "SDR platform devices" |
| depends on MEDIA_SDR_SUPPORT |
| help |
| Say Y here to enable support for platform-specific SDR Drivers. |
| |
| if SDR_PLATFORM_DRIVERS |
| |
| config VIDEO_RCAR_DRIF |
| tristate "Renesas Digital Radio Interface (DRIF)" |
| depends on VIDEO_V4L2 |
| depends on ARCH_RENESAS || COMPILE_TEST |
| select VIDEOBUF2_VMALLOC |
| help |
| Say Y if you want to enable R-Car Gen3 DRIF support. DRIF is Digital |
| Radio Interface that interfaces with an RF front end chip. It is a |
| receiver of digital data which uses DMA to transfer received data to |
| a configured location for an application to use. |
| |
| To compile this driver as a module, choose M here; the module |
| will be called rcar_drif. |
| |
| endif # SDR_PLATFORM_DRIVERS |
