| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Qualcomm Technology Inc. ADSP Peripheral Image Loader for SDM845. |
| * Copyright (c) 2018, The Linux Foundation. All rights reserved. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/firmware.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/iopoll.h> |
| #include <linux/kernel.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/module.h> |
| #include <linux/of_address.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_domain.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regmap.h> |
| #include <linux/remoteproc.h> |
| #include <linux/reset.h> |
| #include <linux/soc/qcom/mdt_loader.h> |
| #include <linux/soc/qcom/smem.h> |
| #include <linux/soc/qcom/smem_state.h> |
| |
| #include "qcom_common.h" |
| #include "qcom_q6v5.h" |
| #include "remoteproc_internal.h" |
| |
| /* time out value */ |
| #define ACK_TIMEOUT 1000 |
| #define BOOT_FSM_TIMEOUT 10000 |
| /* mask values */ |
| #define EVB_MASK GENMASK(27, 4) |
| /*QDSP6SS register offsets*/ |
| #define RST_EVB_REG 0x10 |
| #define CORE_START_REG 0x400 |
| #define BOOT_CMD_REG 0x404 |
| #define BOOT_STATUS_REG 0x408 |
| #define RET_CFG_REG 0x1C |
| /*TCSR register offsets*/ |
| #define LPASS_MASTER_IDLE_REG 0x8 |
| #define LPASS_HALTACK_REG 0x4 |
| #define LPASS_PWR_ON_REG 0x10 |
| #define LPASS_HALTREQ_REG 0x0 |
| |
| /* list of clocks required by ADSP PIL */ |
| static const char * const adsp_clk_id[] = { |
| "sway_cbcr", "lpass_ahbs_aon_cbcr", "lpass_ahbm_aon_cbcr", |
| "qdsp6ss_xo", "qdsp6ss_sleep", "qdsp6ss_core", |
| }; |
| |
| struct adsp_pil_data { |
| int crash_reason_smem; |
| const char *firmware_name; |
| |
| const char *ssr_name; |
| const char *sysmon_name; |
| int ssctl_id; |
| }; |
| |
| struct qcom_adsp { |
| struct device *dev; |
| struct rproc *rproc; |
| |
| struct qcom_q6v5 q6v5; |
| |
| struct clk *xo; |
| |
| int num_clks; |
| struct clk_bulk_data *clks; |
| |
| void __iomem *qdsp6ss_base; |
| |
| struct reset_control *pdc_sync_reset; |
| struct reset_control *cc_lpass_restart; |
| |
| struct regmap *halt_map; |
| unsigned int halt_lpass; |
| |
| int crash_reason_smem; |
| |
| struct completion start_done; |
| struct completion stop_done; |
| |
| phys_addr_t mem_phys; |
| phys_addr_t mem_reloc; |
| void *mem_region; |
| size_t mem_size; |
| |
| struct qcom_rproc_glink glink_subdev; |
| struct qcom_rproc_ssr ssr_subdev; |
| struct qcom_sysmon *sysmon; |
| }; |
| |
| static int qcom_adsp_shutdown(struct qcom_adsp *adsp) |
| { |
| unsigned long timeout; |
| unsigned int val; |
| int ret; |
| |
| /* Reset the retention logic */ |
| val = readl(adsp->qdsp6ss_base + RET_CFG_REG); |
| val |= 0x1; |
| writel(val, adsp->qdsp6ss_base + RET_CFG_REG); |
| |
| clk_bulk_disable_unprepare(adsp->num_clks, adsp->clks); |
| |
| /* QDSP6 master port needs to be explicitly halted */ |
| ret = regmap_read(adsp->halt_map, |
| adsp->halt_lpass + LPASS_PWR_ON_REG, &val); |
| if (ret || !val) |
| goto reset; |
| |
| ret = regmap_read(adsp->halt_map, |
| adsp->halt_lpass + LPASS_MASTER_IDLE_REG, |
| &val); |
| if (ret || val) |
| goto reset; |
| |
| regmap_write(adsp->halt_map, |
| adsp->halt_lpass + LPASS_HALTREQ_REG, 1); |
| |
| /* Wait for halt ACK from QDSP6 */ |
| timeout = jiffies + msecs_to_jiffies(ACK_TIMEOUT); |
| for (;;) { |
| ret = regmap_read(adsp->halt_map, |
| adsp->halt_lpass + LPASS_HALTACK_REG, &val); |
| if (ret || val || time_after(jiffies, timeout)) |
| break; |
| |
| usleep_range(1000, 1100); |
| } |
| |
| ret = regmap_read(adsp->halt_map, |
| adsp->halt_lpass + LPASS_MASTER_IDLE_REG, &val); |
| if (ret || !val) |
| dev_err(adsp->dev, "port failed halt\n"); |
| |
| reset: |
| /* Assert the LPASS PDC Reset */ |
| reset_control_assert(adsp->pdc_sync_reset); |
| /* Place the LPASS processor into reset */ |
| reset_control_assert(adsp->cc_lpass_restart); |
| /* wait after asserting subsystem restart from AOSS */ |
| usleep_range(200, 300); |
| |
| /* Clear the halt request for the AXIM and AHBM for Q6 */ |
| regmap_write(adsp->halt_map, adsp->halt_lpass + LPASS_HALTREQ_REG, 0); |
| |
| /* De-assert the LPASS PDC Reset */ |
| reset_control_deassert(adsp->pdc_sync_reset); |
| /* Remove the LPASS reset */ |
| reset_control_deassert(adsp->cc_lpass_restart); |
| /* wait after de-asserting subsystem restart from AOSS */ |
| usleep_range(200, 300); |
| |
| return 0; |
| } |
| |
| static int adsp_load(struct rproc *rproc, const struct firmware *fw) |
| { |
| struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv; |
| |
| return qcom_mdt_load_no_init(adsp->dev, fw, rproc->firmware, 0, |
| adsp->mem_region, adsp->mem_phys, adsp->mem_size, |
| &adsp->mem_reloc); |
| } |
| |
| static int adsp_start(struct rproc *rproc) |
| { |
| struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv; |
| int ret; |
| unsigned int val; |
| |
| qcom_q6v5_prepare(&adsp->q6v5); |
| |
| ret = clk_prepare_enable(adsp->xo); |
| if (ret) |
| goto disable_irqs; |
| |
| dev_pm_genpd_set_performance_state(adsp->dev, INT_MAX); |
| ret = pm_runtime_get_sync(adsp->dev); |
| if (ret) |
| goto disable_xo_clk; |
| |
| ret = clk_bulk_prepare_enable(adsp->num_clks, adsp->clks); |
| if (ret) { |
| dev_err(adsp->dev, "adsp clk_enable failed\n"); |
| goto disable_power_domain; |
| } |
| |
| /* Program boot address */ |
| writel(adsp->mem_phys >> 4, adsp->qdsp6ss_base + RST_EVB_REG); |
| |
| /* De-assert QDSP6 stop core. QDSP6 will execute after out of reset */ |
| writel(0x1, adsp->qdsp6ss_base + CORE_START_REG); |
| |
| /* Trigger boot FSM to start QDSP6 */ |
| writel(0x1, adsp->qdsp6ss_base + BOOT_CMD_REG); |
| |
| /* Wait for core to come out of reset */ |
| ret = readl_poll_timeout(adsp->qdsp6ss_base + BOOT_STATUS_REG, |
| val, (val & BIT(0)) != 0, 10, BOOT_FSM_TIMEOUT); |
| if (ret) { |
| dev_err(adsp->dev, "failed to bootup adsp\n"); |
| goto disable_adsp_clks; |
| } |
| |
| ret = qcom_q6v5_wait_for_start(&adsp->q6v5, msecs_to_jiffies(5 * HZ)); |
| if (ret == -ETIMEDOUT) { |
| dev_err(adsp->dev, "start timed out\n"); |
| goto disable_adsp_clks; |
| } |
| |
| return 0; |
| |
| disable_adsp_clks: |
| clk_bulk_disable_unprepare(adsp->num_clks, adsp->clks); |
| disable_power_domain: |
| dev_pm_genpd_set_performance_state(adsp->dev, 0); |
| pm_runtime_put(adsp->dev); |
| disable_xo_clk: |
| clk_disable_unprepare(adsp->xo); |
| disable_irqs: |
| qcom_q6v5_unprepare(&adsp->q6v5); |
| |
| return ret; |
| } |
| |
| static void qcom_adsp_pil_handover(struct qcom_q6v5 *q6v5) |
| { |
| struct qcom_adsp *adsp = container_of(q6v5, struct qcom_adsp, q6v5); |
| |
| clk_disable_unprepare(adsp->xo); |
| dev_pm_genpd_set_performance_state(adsp->dev, 0); |
| pm_runtime_put(adsp->dev); |
| } |
| |
| static int adsp_stop(struct rproc *rproc) |
| { |
| struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv; |
| int handover; |
| int ret; |
| |
| ret = qcom_q6v5_request_stop(&adsp->q6v5); |
| if (ret == -ETIMEDOUT) |
| dev_err(adsp->dev, "timed out on wait\n"); |
| |
| ret = qcom_adsp_shutdown(adsp); |
| if (ret) |
| dev_err(adsp->dev, "failed to shutdown: %d\n", ret); |
| |
| handover = qcom_q6v5_unprepare(&adsp->q6v5); |
| if (handover) |
| qcom_adsp_pil_handover(&adsp->q6v5); |
| |
| return ret; |
| } |
| |
| static void *adsp_da_to_va(struct rproc *rproc, u64 da, int len) |
| { |
| struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv; |
| int offset; |
| |
| offset = da - adsp->mem_reloc; |
| if (offset < 0 || offset + len > adsp->mem_size) |
| return NULL; |
| |
| return adsp->mem_region + offset; |
| } |
| |
| static const struct rproc_ops adsp_ops = { |
| .start = adsp_start, |
| .stop = adsp_stop, |
| .da_to_va = adsp_da_to_va, |
| .parse_fw = qcom_register_dump_segments, |
| .load = adsp_load, |
| }; |
| |
| static int adsp_init_clock(struct qcom_adsp *adsp) |
| { |
| int i, ret; |
| |
| adsp->xo = devm_clk_get(adsp->dev, "xo"); |
| if (IS_ERR(adsp->xo)) { |
| ret = PTR_ERR(adsp->xo); |
| if (ret != -EPROBE_DEFER) |
| dev_err(adsp->dev, "failed to get xo clock"); |
| return ret; |
| } |
| |
| adsp->num_clks = ARRAY_SIZE(adsp_clk_id); |
| adsp->clks = devm_kcalloc(adsp->dev, adsp->num_clks, |
| sizeof(*adsp->clks), GFP_KERNEL); |
| if (!adsp->clks) |
| return -ENOMEM; |
| |
| for (i = 0; i < adsp->num_clks; i++) |
| adsp->clks[i].id = adsp_clk_id[i]; |
| |
| return devm_clk_bulk_get(adsp->dev, adsp->num_clks, adsp->clks); |
| } |
| |
| static int adsp_init_reset(struct qcom_adsp *adsp) |
| { |
| adsp->pdc_sync_reset = devm_reset_control_get_exclusive(adsp->dev, |
| "pdc_sync"); |
| if (IS_ERR(adsp->pdc_sync_reset)) { |
| dev_err(adsp->dev, "failed to acquire pdc_sync reset\n"); |
| return PTR_ERR(adsp->pdc_sync_reset); |
| } |
| |
| adsp->cc_lpass_restart = devm_reset_control_get_exclusive(adsp->dev, |
| "cc_lpass"); |
| if (IS_ERR(adsp->cc_lpass_restart)) { |
| dev_err(adsp->dev, "failed to acquire cc_lpass restart\n"); |
| return PTR_ERR(adsp->cc_lpass_restart); |
| } |
| |
| return 0; |
| } |
| |
| static int adsp_init_mmio(struct qcom_adsp *adsp, |
| struct platform_device *pdev) |
| { |
| struct device_node *syscon; |
| struct resource *res; |
| int ret; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| adsp->qdsp6ss_base = devm_ioremap(&pdev->dev, res->start, |
| resource_size(res)); |
| if (!adsp->qdsp6ss_base) { |
| dev_err(adsp->dev, "failed to map QDSP6SS registers\n"); |
| return -ENOMEM; |
| } |
| |
| syscon = of_parse_phandle(pdev->dev.of_node, "qcom,halt-regs", 0); |
| if (!syscon) { |
| dev_err(&pdev->dev, "failed to parse qcom,halt-regs\n"); |
| return -EINVAL; |
| } |
| |
| adsp->halt_map = syscon_node_to_regmap(syscon); |
| of_node_put(syscon); |
| if (IS_ERR(adsp->halt_map)) |
| return PTR_ERR(adsp->halt_map); |
| |
| ret = of_property_read_u32_index(pdev->dev.of_node, "qcom,halt-regs", |
| 1, &adsp->halt_lpass); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "no offset in syscon\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int adsp_alloc_memory_region(struct qcom_adsp *adsp) |
| { |
| struct device_node *node; |
| struct resource r; |
| int ret; |
| |
| node = of_parse_phandle(adsp->dev->of_node, "memory-region", 0); |
| if (!node) { |
| dev_err(adsp->dev, "no memory-region specified\n"); |
| return -EINVAL; |
| } |
| |
| ret = of_address_to_resource(node, 0, &r); |
| if (ret) |
| return ret; |
| |
| adsp->mem_phys = adsp->mem_reloc = r.start; |
| adsp->mem_size = resource_size(&r); |
| adsp->mem_region = devm_ioremap_wc(adsp->dev, |
| adsp->mem_phys, adsp->mem_size); |
| if (!adsp->mem_region) { |
| dev_err(adsp->dev, "unable to map memory region: %pa+%zx\n", |
| &r.start, adsp->mem_size); |
| return -EBUSY; |
| } |
| |
| return 0; |
| } |
| |
| static int adsp_probe(struct platform_device *pdev) |
| { |
| const struct adsp_pil_data *desc; |
| struct qcom_adsp *adsp; |
| struct rproc *rproc; |
| int ret; |
| |
| desc = of_device_get_match_data(&pdev->dev); |
| if (!desc) |
| return -EINVAL; |
| |
| rproc = rproc_alloc(&pdev->dev, pdev->name, &adsp_ops, |
| desc->firmware_name, sizeof(*adsp)); |
| if (!rproc) { |
| dev_err(&pdev->dev, "unable to allocate remoteproc\n"); |
| return -ENOMEM; |
| } |
| |
| adsp = (struct qcom_adsp *)rproc->priv; |
| adsp->dev = &pdev->dev; |
| adsp->rproc = rproc; |
| platform_set_drvdata(pdev, adsp); |
| |
| ret = adsp_alloc_memory_region(adsp); |
| if (ret) |
| goto free_rproc; |
| |
| ret = adsp_init_clock(adsp); |
| if (ret) |
| goto free_rproc; |
| |
| pm_runtime_enable(adsp->dev); |
| |
| ret = adsp_init_reset(adsp); |
| if (ret) |
| goto disable_pm; |
| |
| ret = adsp_init_mmio(adsp, pdev); |
| if (ret) |
| goto disable_pm; |
| |
| ret = qcom_q6v5_init(&adsp->q6v5, pdev, rproc, desc->crash_reason_smem, |
| qcom_adsp_pil_handover); |
| if (ret) |
| goto disable_pm; |
| |
| qcom_add_glink_subdev(rproc, &adsp->glink_subdev); |
| qcom_add_ssr_subdev(rproc, &adsp->ssr_subdev, desc->ssr_name); |
| adsp->sysmon = qcom_add_sysmon_subdev(rproc, |
| desc->sysmon_name, |
| desc->ssctl_id); |
| if (IS_ERR(adsp->sysmon)) { |
| ret = PTR_ERR(adsp->sysmon); |
| goto disable_pm; |
| } |
| |
| ret = rproc_add(rproc); |
| if (ret) |
| goto disable_pm; |
| |
| return 0; |
| |
| disable_pm: |
| pm_runtime_disable(adsp->dev); |
| free_rproc: |
| rproc_free(rproc); |
| |
| return ret; |
| } |
| |
| static int adsp_remove(struct platform_device *pdev) |
| { |
| struct qcom_adsp *adsp = platform_get_drvdata(pdev); |
| |
| rproc_del(adsp->rproc); |
| |
| qcom_remove_glink_subdev(adsp->rproc, &adsp->glink_subdev); |
| qcom_remove_sysmon_subdev(adsp->sysmon); |
| qcom_remove_ssr_subdev(adsp->rproc, &adsp->ssr_subdev); |
| pm_runtime_disable(adsp->dev); |
| rproc_free(adsp->rproc); |
| |
| return 0; |
| } |
| |
| static const struct adsp_pil_data adsp_resource_init = { |
| .crash_reason_smem = 423, |
| .firmware_name = "adsp.mdt", |
| .ssr_name = "lpass", |
| .sysmon_name = "adsp", |
| .ssctl_id = 0x14, |
| }; |
| |
| static const struct of_device_id adsp_of_match[] = { |
| { .compatible = "qcom,sdm845-adsp-pil", .data = &adsp_resource_init }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, adsp_of_match); |
| |
| static struct platform_driver adsp_pil_driver = { |
| .probe = adsp_probe, |
| .remove = adsp_remove, |
| .driver = { |
| .name = "qcom_q6v5_adsp", |
| .of_match_table = adsp_of_match, |
| }, |
| }; |
| |
| module_platform_driver(adsp_pil_driver); |
| MODULE_DESCRIPTION("QTI SDM845 ADSP Peripheral Image Loader"); |
| MODULE_LICENSE("GPL v2"); |