| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * SMI PCIe driver for DVBSky cards. |
| * |
| * Copyright (C) 2014 Max nibble <nibble.max@gmail.com> |
| */ |
| |
| #include "smipcie.h" |
| #include "m88ds3103.h" |
| #include "ts2020.h" |
| #include "m88rs6000t.h" |
| #include "si2168.h" |
| #include "si2157.h" |
| |
| DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
| |
| static int smi_hw_init(struct smi_dev *dev) |
| { |
| u32 port_mux, port_ctrl, int_stat; |
| |
| /* set port mux.*/ |
| port_mux = smi_read(MUX_MODE_CTRL); |
| port_mux &= ~(rbPaMSMask); |
| port_mux |= rbPaMSDtvNoGpio; |
| port_mux &= ~(rbPbMSMask); |
| port_mux |= rbPbMSDtvNoGpio; |
| port_mux &= ~(0x0f0000); |
| port_mux |= 0x50000; |
| smi_write(MUX_MODE_CTRL, port_mux); |
| |
| /* set DTV register.*/ |
| /* Port A */ |
| port_ctrl = smi_read(VIDEO_CTRL_STATUS_A); |
| port_ctrl &= ~0x01; |
| smi_write(VIDEO_CTRL_STATUS_A, port_ctrl); |
| port_ctrl = smi_read(MPEG2_CTRL_A); |
| port_ctrl &= ~0x40; |
| port_ctrl |= 0x80; |
| smi_write(MPEG2_CTRL_A, port_ctrl); |
| /* Port B */ |
| port_ctrl = smi_read(VIDEO_CTRL_STATUS_B); |
| port_ctrl &= ~0x01; |
| smi_write(VIDEO_CTRL_STATUS_B, port_ctrl); |
| port_ctrl = smi_read(MPEG2_CTRL_B); |
| port_ctrl &= ~0x40; |
| port_ctrl |= 0x80; |
| smi_write(MPEG2_CTRL_B, port_ctrl); |
| |
| /* disable and clear interrupt.*/ |
| smi_write(MSI_INT_ENA_CLR, ALL_INT); |
| int_stat = smi_read(MSI_INT_STATUS); |
| smi_write(MSI_INT_STATUS_CLR, int_stat); |
| |
| /* reset demod.*/ |
| smi_clear(PERIPHERAL_CTRL, 0x0303); |
| msleep(50); |
| smi_set(PERIPHERAL_CTRL, 0x0101); |
| return 0; |
| } |
| |
| /* i2c bit bus.*/ |
| static void smi_i2c_cfg(struct smi_dev *dev, u32 sw_ctl) |
| { |
| u32 dwCtrl; |
| |
| dwCtrl = smi_read(sw_ctl); |
| dwCtrl &= ~0x18; /* disable output.*/ |
| dwCtrl |= 0x21; /* reset and software mode.*/ |
| dwCtrl &= ~0xff00; |
| dwCtrl |= 0x6400; |
| smi_write(sw_ctl, dwCtrl); |
| msleep(20); |
| dwCtrl = smi_read(sw_ctl); |
| dwCtrl &= ~0x20; |
| smi_write(sw_ctl, dwCtrl); |
| } |
| |
| static void smi_i2c_setsda(struct smi_dev *dev, int state, u32 sw_ctl) |
| { |
| if (state) { |
| /* set as input.*/ |
| smi_clear(sw_ctl, SW_I2C_MSK_DAT_EN); |
| } else { |
| smi_clear(sw_ctl, SW_I2C_MSK_DAT_OUT); |
| /* set as output.*/ |
| smi_set(sw_ctl, SW_I2C_MSK_DAT_EN); |
| } |
| } |
| |
| static void smi_i2c_setscl(void *data, int state, u32 sw_ctl) |
| { |
| struct smi_dev *dev = data; |
| |
| if (state) { |
| /* set as input.*/ |
| smi_clear(sw_ctl, SW_I2C_MSK_CLK_EN); |
| } else { |
| smi_clear(sw_ctl, SW_I2C_MSK_CLK_OUT); |
| /* set as output.*/ |
| smi_set(sw_ctl, SW_I2C_MSK_CLK_EN); |
| } |
| } |
| |
| static int smi_i2c_getsda(void *data, u32 sw_ctl) |
| { |
| struct smi_dev *dev = data; |
| /* set as input.*/ |
| smi_clear(sw_ctl, SW_I2C_MSK_DAT_EN); |
| udelay(1); |
| return (smi_read(sw_ctl) & SW_I2C_MSK_DAT_IN) ? 1 : 0; |
| } |
| |
| static int smi_i2c_getscl(void *data, u32 sw_ctl) |
| { |
| struct smi_dev *dev = data; |
| /* set as input.*/ |
| smi_clear(sw_ctl, SW_I2C_MSK_CLK_EN); |
| udelay(1); |
| return (smi_read(sw_ctl) & SW_I2C_MSK_CLK_IN) ? 1 : 0; |
| } |
| /* i2c 0.*/ |
| static void smi_i2c0_setsda(void *data, int state) |
| { |
| struct smi_dev *dev = data; |
| |
| smi_i2c_setsda(dev, state, I2C_A_SW_CTL); |
| } |
| |
| static void smi_i2c0_setscl(void *data, int state) |
| { |
| struct smi_dev *dev = data; |
| |
| smi_i2c_setscl(dev, state, I2C_A_SW_CTL); |
| } |
| |
| static int smi_i2c0_getsda(void *data) |
| { |
| struct smi_dev *dev = data; |
| |
| return smi_i2c_getsda(dev, I2C_A_SW_CTL); |
| } |
| |
| static int smi_i2c0_getscl(void *data) |
| { |
| struct smi_dev *dev = data; |
| |
| return smi_i2c_getscl(dev, I2C_A_SW_CTL); |
| } |
| /* i2c 1.*/ |
| static void smi_i2c1_setsda(void *data, int state) |
| { |
| struct smi_dev *dev = data; |
| |
| smi_i2c_setsda(dev, state, I2C_B_SW_CTL); |
| } |
| |
| static void smi_i2c1_setscl(void *data, int state) |
| { |
| struct smi_dev *dev = data; |
| |
| smi_i2c_setscl(dev, state, I2C_B_SW_CTL); |
| } |
| |
| static int smi_i2c1_getsda(void *data) |
| { |
| struct smi_dev *dev = data; |
| |
| return smi_i2c_getsda(dev, I2C_B_SW_CTL); |
| } |
| |
| static int smi_i2c1_getscl(void *data) |
| { |
| struct smi_dev *dev = data; |
| |
| return smi_i2c_getscl(dev, I2C_B_SW_CTL); |
| } |
| |
| static int smi_i2c_init(struct smi_dev *dev) |
| { |
| int ret; |
| |
| /* i2c bus 0 */ |
| smi_i2c_cfg(dev, I2C_A_SW_CTL); |
| i2c_set_adapdata(&dev->i2c_bus[0], dev); |
| strscpy(dev->i2c_bus[0].name, "SMI-I2C0", sizeof(dev->i2c_bus[0].name)); |
| dev->i2c_bus[0].owner = THIS_MODULE; |
| dev->i2c_bus[0].dev.parent = &dev->pci_dev->dev; |
| dev->i2c_bus[0].algo_data = &dev->i2c_bit[0]; |
| dev->i2c_bit[0].data = dev; |
| dev->i2c_bit[0].setsda = smi_i2c0_setsda; |
| dev->i2c_bit[0].setscl = smi_i2c0_setscl; |
| dev->i2c_bit[0].getsda = smi_i2c0_getsda; |
| dev->i2c_bit[0].getscl = smi_i2c0_getscl; |
| dev->i2c_bit[0].udelay = 12; |
| dev->i2c_bit[0].timeout = 10; |
| /* Raise SCL and SDA */ |
| smi_i2c0_setsda(dev, 1); |
| smi_i2c0_setscl(dev, 1); |
| |
| ret = i2c_bit_add_bus(&dev->i2c_bus[0]); |
| if (ret < 0) |
| return ret; |
| |
| /* i2c bus 1 */ |
| smi_i2c_cfg(dev, I2C_B_SW_CTL); |
| i2c_set_adapdata(&dev->i2c_bus[1], dev); |
| strscpy(dev->i2c_bus[1].name, "SMI-I2C1", sizeof(dev->i2c_bus[1].name)); |
| dev->i2c_bus[1].owner = THIS_MODULE; |
| dev->i2c_bus[1].dev.parent = &dev->pci_dev->dev; |
| dev->i2c_bus[1].algo_data = &dev->i2c_bit[1]; |
| dev->i2c_bit[1].data = dev; |
| dev->i2c_bit[1].setsda = smi_i2c1_setsda; |
| dev->i2c_bit[1].setscl = smi_i2c1_setscl; |
| dev->i2c_bit[1].getsda = smi_i2c1_getsda; |
| dev->i2c_bit[1].getscl = smi_i2c1_getscl; |
| dev->i2c_bit[1].udelay = 12; |
| dev->i2c_bit[1].timeout = 10; |
| /* Raise SCL and SDA */ |
| smi_i2c1_setsda(dev, 1); |
| smi_i2c1_setscl(dev, 1); |
| |
| ret = i2c_bit_add_bus(&dev->i2c_bus[1]); |
| if (ret < 0) |
| i2c_del_adapter(&dev->i2c_bus[0]); |
| |
| return ret; |
| } |
| |
| static void smi_i2c_exit(struct smi_dev *dev) |
| { |
| i2c_del_adapter(&dev->i2c_bus[0]); |
| i2c_del_adapter(&dev->i2c_bus[1]); |
| } |
| |
| static int smi_read_eeprom(struct i2c_adapter *i2c, u16 reg, u8 *data, u16 size) |
| { |
| int ret; |
| u8 b0[2] = { (reg >> 8) & 0xff, reg & 0xff }; |
| |
| struct i2c_msg msg[] = { |
| { .addr = 0x50, .flags = 0, |
| .buf = b0, .len = 2 }, |
| { .addr = 0x50, .flags = I2C_M_RD, |
| .buf = data, .len = size } |
| }; |
| |
| ret = i2c_transfer(i2c, msg, 2); |
| |
| if (ret != 2) { |
| dev_err(&i2c->dev, "%s: reg=0x%x (error=%d)\n", |
| __func__, reg, ret); |
| return ret; |
| } |
| return ret; |
| } |
| |
| /* ts port interrupt operations */ |
| static void smi_port_disableInterrupt(struct smi_port *port) |
| { |
| struct smi_dev *dev = port->dev; |
| |
| smi_write(MSI_INT_ENA_CLR, |
| (port->_dmaInterruptCH0 | port->_dmaInterruptCH1)); |
| } |
| |
| static void smi_port_enableInterrupt(struct smi_port *port) |
| { |
| struct smi_dev *dev = port->dev; |
| |
| smi_write(MSI_INT_ENA_SET, |
| (port->_dmaInterruptCH0 | port->_dmaInterruptCH1)); |
| } |
| |
| static void smi_port_clearInterrupt(struct smi_port *port) |
| { |
| struct smi_dev *dev = port->dev; |
| |
| smi_write(MSI_INT_STATUS_CLR, |
| (port->_dmaInterruptCH0 | port->_dmaInterruptCH1)); |
| } |
| |
| /* tasklet handler: DMA data to dmx.*/ |
| static void smi_dma_xfer(struct tasklet_struct *t) |
| { |
| struct smi_port *port = from_tasklet(port, t, tasklet); |
| struct smi_dev *dev = port->dev; |
| u32 intr_status, finishedData, dmaManagement; |
| u8 dmaChan0State, dmaChan1State; |
| |
| intr_status = port->_int_status; |
| dmaManagement = smi_read(port->DMA_MANAGEMENT); |
| dmaChan0State = (u8)((dmaManagement & 0x00000030) >> 4); |
| dmaChan1State = (u8)((dmaManagement & 0x00300000) >> 20); |
| |
| /* CH-0 DMA interrupt.*/ |
| if ((intr_status & port->_dmaInterruptCH0) && (dmaChan0State == 0x01)) { |
| dev_dbg(&dev->pci_dev->dev, |
| "Port[%d]-DMA CH0 engine complete successful !\n", |
| port->idx); |
| finishedData = smi_read(port->DMA_CHAN0_TRANS_STATE); |
| finishedData &= 0x003FFFFF; |
| /* value of DMA_PORT0_CHAN0_TRANS_STATE register [21:0] |
| * indicate dma total transfer length and |
| * zero of [21:0] indicate dma total transfer length |
| * equal to 0x400000 (4MB)*/ |
| if (finishedData == 0) |
| finishedData = 0x00400000; |
| if (finishedData != SMI_TS_DMA_BUF_SIZE) { |
| dev_dbg(&dev->pci_dev->dev, |
| "DMA CH0 engine complete length mismatched, finish data=%d !\n", |
| finishedData); |
| } |
| dvb_dmx_swfilter_packets(&port->demux, |
| port->cpu_addr[0], (finishedData / 188)); |
| /*dvb_dmx_swfilter(&port->demux, |
| port->cpu_addr[0], finishedData);*/ |
| } |
| /* CH-1 DMA interrupt.*/ |
| if ((intr_status & port->_dmaInterruptCH1) && (dmaChan1State == 0x01)) { |
| dev_dbg(&dev->pci_dev->dev, |
| "Port[%d]-DMA CH1 engine complete successful !\n", |
| port->idx); |
| finishedData = smi_read(port->DMA_CHAN1_TRANS_STATE); |
| finishedData &= 0x003FFFFF; |
| /* value of DMA_PORT0_CHAN0_TRANS_STATE register [21:0] |
| * indicate dma total transfer length and |
| * zero of [21:0] indicate dma total transfer length |
| * equal to 0x400000 (4MB)*/ |
| if (finishedData == 0) |
| finishedData = 0x00400000; |
| if (finishedData != SMI_TS_DMA_BUF_SIZE) { |
| dev_dbg(&dev->pci_dev->dev, |
| "DMA CH1 engine complete length mismatched, finish data=%d !\n", |
| finishedData); |
| } |
| dvb_dmx_swfilter_packets(&port->demux, |
| port->cpu_addr[1], (finishedData / 188)); |
| /*dvb_dmx_swfilter(&port->demux, |
| port->cpu_addr[1], finishedData);*/ |
| } |
| /* restart DMA.*/ |
| if (intr_status & port->_dmaInterruptCH0) |
| dmaManagement |= 0x00000002; |
| if (intr_status & port->_dmaInterruptCH1) |
| dmaManagement |= 0x00020000; |
| smi_write(port->DMA_MANAGEMENT, dmaManagement); |
| /* Re-enable interrupts */ |
| smi_port_enableInterrupt(port); |
| } |
| |
| static void smi_port_dma_free(struct smi_port *port) |
| { |
| if (port->cpu_addr[0]) { |
| pci_free_consistent(port->dev->pci_dev, SMI_TS_DMA_BUF_SIZE, |
| port->cpu_addr[0], port->dma_addr[0]); |
| port->cpu_addr[0] = NULL; |
| } |
| if (port->cpu_addr[1]) { |
| pci_free_consistent(port->dev->pci_dev, SMI_TS_DMA_BUF_SIZE, |
| port->cpu_addr[1], port->dma_addr[1]); |
| port->cpu_addr[1] = NULL; |
| } |
| } |
| |
| static int smi_port_init(struct smi_port *port, int dmaChanUsed) |
| { |
| dev_dbg(&port->dev->pci_dev->dev, |
| "%s, port %d, dmaused %d\n", __func__, port->idx, dmaChanUsed); |
| port->enable = 0; |
| if (port->idx == 0) { |
| /* Port A */ |
| port->_dmaInterruptCH0 = dmaChanUsed & 0x01; |
| port->_dmaInterruptCH1 = dmaChanUsed & 0x02; |
| |
| port->DMA_CHAN0_ADDR_LOW = DMA_PORTA_CHAN0_ADDR_LOW; |
| port->DMA_CHAN0_ADDR_HI = DMA_PORTA_CHAN0_ADDR_HI; |
| port->DMA_CHAN0_TRANS_STATE = DMA_PORTA_CHAN0_TRANS_STATE; |
| port->DMA_CHAN0_CONTROL = DMA_PORTA_CHAN0_CONTROL; |
| port->DMA_CHAN1_ADDR_LOW = DMA_PORTA_CHAN1_ADDR_LOW; |
| port->DMA_CHAN1_ADDR_HI = DMA_PORTA_CHAN1_ADDR_HI; |
| port->DMA_CHAN1_TRANS_STATE = DMA_PORTA_CHAN1_TRANS_STATE; |
| port->DMA_CHAN1_CONTROL = DMA_PORTA_CHAN1_CONTROL; |
| port->DMA_MANAGEMENT = DMA_PORTA_MANAGEMENT; |
| } else { |
| /* Port B */ |
| port->_dmaInterruptCH0 = (dmaChanUsed << 2) & 0x04; |
| port->_dmaInterruptCH1 = (dmaChanUsed << 2) & 0x08; |
| |
| port->DMA_CHAN0_ADDR_LOW = DMA_PORTB_CHAN0_ADDR_LOW; |
| port->DMA_CHAN0_ADDR_HI = DMA_PORTB_CHAN0_ADDR_HI; |
| port->DMA_CHAN0_TRANS_STATE = DMA_PORTB_CHAN0_TRANS_STATE; |
| port->DMA_CHAN0_CONTROL = DMA_PORTB_CHAN0_CONTROL; |
| port->DMA_CHAN1_ADDR_LOW = DMA_PORTB_CHAN1_ADDR_LOW; |
| port->DMA_CHAN1_ADDR_HI = DMA_PORTB_CHAN1_ADDR_HI; |
| port->DMA_CHAN1_TRANS_STATE = DMA_PORTB_CHAN1_TRANS_STATE; |
| port->DMA_CHAN1_CONTROL = DMA_PORTB_CHAN1_CONTROL; |
| port->DMA_MANAGEMENT = DMA_PORTB_MANAGEMENT; |
| } |
| |
| if (port->_dmaInterruptCH0) { |
| port->cpu_addr[0] = pci_alloc_consistent(port->dev->pci_dev, |
| SMI_TS_DMA_BUF_SIZE, |
| &port->dma_addr[0]); |
| if (!port->cpu_addr[0]) { |
| dev_err(&port->dev->pci_dev->dev, |
| "Port[%d] DMA CH0 memory allocation failed!\n", |
| port->idx); |
| goto err; |
| } |
| } |
| |
| if (port->_dmaInterruptCH1) { |
| port->cpu_addr[1] = pci_alloc_consistent(port->dev->pci_dev, |
| SMI_TS_DMA_BUF_SIZE, |
| &port->dma_addr[1]); |
| if (!port->cpu_addr[1]) { |
| dev_err(&port->dev->pci_dev->dev, |
| "Port[%d] DMA CH1 memory allocation failed!\n", |
| port->idx); |
| goto err; |
| } |
| } |
| |
| smi_port_disableInterrupt(port); |
| tasklet_setup(&port->tasklet, smi_dma_xfer); |
| tasklet_disable(&port->tasklet); |
| port->enable = 1; |
| return 0; |
| err: |
| smi_port_dma_free(port); |
| return -ENOMEM; |
| } |
| |
| static void smi_port_exit(struct smi_port *port) |
| { |
| smi_port_disableInterrupt(port); |
| tasklet_kill(&port->tasklet); |
| smi_port_dma_free(port); |
| port->enable = 0; |
| } |
| |
| static int smi_port_irq(struct smi_port *port, u32 int_status) |
| { |
| u32 port_req_irq = port->_dmaInterruptCH0 | port->_dmaInterruptCH1; |
| int handled = 0; |
| |
| if (int_status & port_req_irq) { |
| smi_port_disableInterrupt(port); |
| port->_int_status = int_status; |
| smi_port_clearInterrupt(port); |
| tasklet_schedule(&port->tasklet); |
| handled = 1; |
| } |
| return handled; |
| } |
| |
| static irqreturn_t smi_irq_handler(int irq, void *dev_id) |
| { |
| struct smi_dev *dev = dev_id; |
| struct smi_port *port0 = &dev->ts_port[0]; |
| struct smi_port *port1 = &dev->ts_port[1]; |
| struct smi_rc *ir = &dev->ir; |
| int handled = 0; |
| |
| u32 intr_status = smi_read(MSI_INT_STATUS); |
| |
| /* ts0 interrupt.*/ |
| if (dev->info->ts_0) |
| handled += smi_port_irq(port0, intr_status); |
| |
| /* ts1 interrupt.*/ |
| if (dev->info->ts_1) |
| handled += smi_port_irq(port1, intr_status); |
| |
| /* ir interrupt.*/ |
| handled += smi_ir_irq(ir, intr_status); |
| |
| return IRQ_RETVAL(handled); |
| } |
| |
| static struct i2c_client *smi_add_i2c_client(struct i2c_adapter *adapter, |
| struct i2c_board_info *info) |
| { |
| struct i2c_client *client; |
| |
| request_module(info->type); |
| client = i2c_new_client_device(adapter, info); |
| if (!i2c_client_has_driver(client)) |
| goto err_add_i2c_client; |
| |
| if (!try_module_get(client->dev.driver->owner)) { |
| i2c_unregister_device(client); |
| goto err_add_i2c_client; |
| } |
| return client; |
| |
| err_add_i2c_client: |
| client = NULL; |
| return client; |
| } |
| |
| static void smi_del_i2c_client(struct i2c_client *client) |
| { |
| module_put(client->dev.driver->owner); |
| i2c_unregister_device(client); |
| } |
| |
| static const struct m88ds3103_config smi_dvbsky_m88ds3103_cfg = { |
| .i2c_addr = 0x68, |
| .clock = 27000000, |
| .i2c_wr_max = 33, |
| .clock_out = 0, |
| .ts_mode = M88DS3103_TS_PARALLEL, |
| .ts_clk = 16000, |
| .ts_clk_pol = 1, |
| .agc = 0x99, |
| .lnb_hv_pol = 0, |
| .lnb_en_pol = 1, |
| }; |
| |
| static int smi_dvbsky_m88ds3103_fe_attach(struct smi_port *port) |
| { |
| int ret = 0; |
| struct smi_dev *dev = port->dev; |
| struct i2c_adapter *i2c; |
| /* tuner I2C module */ |
| struct i2c_adapter *tuner_i2c_adapter; |
| struct i2c_client *tuner_client; |
| struct i2c_board_info tuner_info; |
| struct ts2020_config ts2020_config = {}; |
| memset(&tuner_info, 0, sizeof(struct i2c_board_info)); |
| i2c = (port->idx == 0) ? &dev->i2c_bus[0] : &dev->i2c_bus[1]; |
| |
| /* attach demod */ |
| port->fe = dvb_attach(m88ds3103_attach, |
| &smi_dvbsky_m88ds3103_cfg, i2c, &tuner_i2c_adapter); |
| if (!port->fe) { |
| ret = -ENODEV; |
| return ret; |
| } |
| /* attach tuner */ |
| ts2020_config.fe = port->fe; |
| strscpy(tuner_info.type, "ts2020", I2C_NAME_SIZE); |
| tuner_info.addr = 0x60; |
| tuner_info.platform_data = &ts2020_config; |
| tuner_client = smi_add_i2c_client(tuner_i2c_adapter, &tuner_info); |
| if (!tuner_client) { |
| ret = -ENODEV; |
| goto err_tuner_i2c_device; |
| } |
| |
| /* delegate signal strength measurement to tuner */ |
| port->fe->ops.read_signal_strength = |
| port->fe->ops.tuner_ops.get_rf_strength; |
| |
| port->i2c_client_tuner = tuner_client; |
| return ret; |
| |
| err_tuner_i2c_device: |
| dvb_frontend_detach(port->fe); |
| return ret; |
| } |
| |
| static const struct m88ds3103_config smi_dvbsky_m88rs6000_cfg = { |
| .i2c_addr = 0x69, |
| .clock = 27000000, |
| .i2c_wr_max = 33, |
| .ts_mode = M88DS3103_TS_PARALLEL, |
| .ts_clk = 16000, |
| .ts_clk_pol = 1, |
| .agc = 0x99, |
| .lnb_hv_pol = 0, |
| .lnb_en_pol = 1, |
| }; |
| |
| static int smi_dvbsky_m88rs6000_fe_attach(struct smi_port *port) |
| { |
| int ret = 0; |
| struct smi_dev *dev = port->dev; |
| struct i2c_adapter *i2c; |
| /* tuner I2C module */ |
| struct i2c_adapter *tuner_i2c_adapter; |
| struct i2c_client *tuner_client; |
| struct i2c_board_info tuner_info; |
| struct m88rs6000t_config m88rs6000t_config; |
| |
| memset(&tuner_info, 0, sizeof(struct i2c_board_info)); |
| i2c = (port->idx == 0) ? &dev->i2c_bus[0] : &dev->i2c_bus[1]; |
| |
| /* attach demod */ |
| port->fe = dvb_attach(m88ds3103_attach, |
| &smi_dvbsky_m88rs6000_cfg, i2c, &tuner_i2c_adapter); |
| if (!port->fe) { |
| ret = -ENODEV; |
| return ret; |
| } |
| /* attach tuner */ |
| m88rs6000t_config.fe = port->fe; |
| strscpy(tuner_info.type, "m88rs6000t", I2C_NAME_SIZE); |
| tuner_info.addr = 0x21; |
| tuner_info.platform_data = &m88rs6000t_config; |
| tuner_client = smi_add_i2c_client(tuner_i2c_adapter, &tuner_info); |
| if (!tuner_client) { |
| ret = -ENODEV; |
| goto err_tuner_i2c_device; |
| } |
| |
| /* delegate signal strength measurement to tuner */ |
| port->fe->ops.read_signal_strength = |
| port->fe->ops.tuner_ops.get_rf_strength; |
| |
| port->i2c_client_tuner = tuner_client; |
| return ret; |
| |
| err_tuner_i2c_device: |
| dvb_frontend_detach(port->fe); |
| return ret; |
| } |
| |
| static int smi_dvbsky_sit2_fe_attach(struct smi_port *port) |
| { |
| int ret = 0; |
| struct smi_dev *dev = port->dev; |
| struct i2c_adapter *i2c; |
| struct i2c_adapter *tuner_i2c_adapter; |
| struct i2c_client *client_tuner, *client_demod; |
| struct i2c_board_info client_info; |
| struct si2168_config si2168_config; |
| struct si2157_config si2157_config; |
| |
| /* select i2c bus */ |
| i2c = (port->idx == 0) ? &dev->i2c_bus[0] : &dev->i2c_bus[1]; |
| |
| /* attach demod */ |
| memset(&si2168_config, 0, sizeof(si2168_config)); |
| si2168_config.i2c_adapter = &tuner_i2c_adapter; |
| si2168_config.fe = &port->fe; |
| si2168_config.ts_mode = SI2168_TS_PARALLEL; |
| |
| memset(&client_info, 0, sizeof(struct i2c_board_info)); |
| strscpy(client_info.type, "si2168", I2C_NAME_SIZE); |
| client_info.addr = 0x64; |
| client_info.platform_data = &si2168_config; |
| |
| client_demod = smi_add_i2c_client(i2c, &client_info); |
| if (!client_demod) { |
| ret = -ENODEV; |
| return ret; |
| } |
| port->i2c_client_demod = client_demod; |
| |
| /* attach tuner */ |
| memset(&si2157_config, 0, sizeof(si2157_config)); |
| si2157_config.fe = port->fe; |
| si2157_config.if_port = 1; |
| |
| memset(&client_info, 0, sizeof(struct i2c_board_info)); |
| strscpy(client_info.type, "si2157", I2C_NAME_SIZE); |
| client_info.addr = 0x60; |
| client_info.platform_data = &si2157_config; |
| |
| client_tuner = smi_add_i2c_client(tuner_i2c_adapter, &client_info); |
| if (!client_tuner) { |
| smi_del_i2c_client(port->i2c_client_demod); |
| port->i2c_client_demod = NULL; |
| ret = -ENODEV; |
| return ret; |
| } |
| port->i2c_client_tuner = client_tuner; |
| return ret; |
| } |
| |
| static int smi_fe_init(struct smi_port *port) |
| { |
| int ret = 0; |
| struct smi_dev *dev = port->dev; |
| struct dvb_adapter *adap = &port->dvb_adapter; |
| u8 mac_ee[16]; |
| |
| dev_dbg(&port->dev->pci_dev->dev, |
| "%s: port %d, fe_type = %d\n", |
| __func__, port->idx, port->fe_type); |
| switch (port->fe_type) { |
| case DVBSKY_FE_M88DS3103: |
| ret = smi_dvbsky_m88ds3103_fe_attach(port); |
| break; |
| case DVBSKY_FE_M88RS6000: |
| ret = smi_dvbsky_m88rs6000_fe_attach(port); |
| break; |
| case DVBSKY_FE_SIT2: |
| ret = smi_dvbsky_sit2_fe_attach(port); |
| break; |
| } |
| if (ret < 0) |
| return ret; |
| |
| /* register dvb frontend */ |
| ret = dvb_register_frontend(adap, port->fe); |
| if (ret < 0) { |
| if (port->i2c_client_tuner) |
| smi_del_i2c_client(port->i2c_client_tuner); |
| if (port->i2c_client_demod) |
| smi_del_i2c_client(port->i2c_client_demod); |
| dvb_frontend_detach(port->fe); |
| return ret; |
| } |
| /* init MAC.*/ |
| ret = smi_read_eeprom(&dev->i2c_bus[0], 0xc0, mac_ee, 16); |
| dev_info(&port->dev->pci_dev->dev, |
| "%s port %d MAC: %pM\n", dev->info->name, |
| port->idx, mac_ee + (port->idx)*8); |
| memcpy(adap->proposed_mac, mac_ee + (port->idx)*8, 6); |
| return ret; |
| } |
| |
| static void smi_fe_exit(struct smi_port *port) |
| { |
| dvb_unregister_frontend(port->fe); |
| /* remove I2C demod and tuner */ |
| if (port->i2c_client_tuner) |
| smi_del_i2c_client(port->i2c_client_tuner); |
| if (port->i2c_client_demod) |
| smi_del_i2c_client(port->i2c_client_demod); |
| dvb_frontend_detach(port->fe); |
| } |
| |
| static int my_dvb_dmx_ts_card_init(struct dvb_demux *dvbdemux, char *id, |
| int (*start_feed)(struct dvb_demux_feed *), |
| int (*stop_feed)(struct dvb_demux_feed *), |
| void *priv) |
| { |
| dvbdemux->priv = priv; |
| |
| dvbdemux->filternum = 256; |
| dvbdemux->feednum = 256; |
| dvbdemux->start_feed = start_feed; |
| dvbdemux->stop_feed = stop_feed; |
| dvbdemux->write_to_decoder = NULL; |
| dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | |
| DMX_SECTION_FILTERING | |
| DMX_MEMORY_BASED_FILTERING); |
| return dvb_dmx_init(dvbdemux); |
| } |
| |
| static int my_dvb_dmxdev_ts_card_init(struct dmxdev *dmxdev, |
| struct dvb_demux *dvbdemux, |
| struct dmx_frontend *hw_frontend, |
| struct dmx_frontend *mem_frontend, |
| struct dvb_adapter *dvb_adapter) |
| { |
| int ret; |
| |
| dmxdev->filternum = 256; |
| dmxdev->demux = &dvbdemux->dmx; |
| dmxdev->capabilities = 0; |
| ret = dvb_dmxdev_init(dmxdev, dvb_adapter); |
| if (ret < 0) |
| return ret; |
| |
| hw_frontend->source = DMX_FRONTEND_0; |
| dvbdemux->dmx.add_frontend(&dvbdemux->dmx, hw_frontend); |
| mem_frontend->source = DMX_MEMORY_FE; |
| dvbdemux->dmx.add_frontend(&dvbdemux->dmx, mem_frontend); |
| return dvbdemux->dmx.connect_frontend(&dvbdemux->dmx, hw_frontend); |
| } |
| |
| static u32 smi_config_DMA(struct smi_port *port) |
| { |
| struct smi_dev *dev = port->dev; |
| u32 totalLength = 0, dmaMemPtrLow, dmaMemPtrHi, dmaCtlReg; |
| u8 chanLatencyTimer = 0, dmaChanEnable = 1, dmaTransStart = 1; |
| u32 dmaManagement = 0, tlpTransUnit = DMA_TRANS_UNIT_188; |
| u8 tlpTc = 0, tlpTd = 1, tlpEp = 0, tlpAttr = 0; |
| u64 mem; |
| |
| dmaManagement = smi_read(port->DMA_MANAGEMENT); |
| /* Setup Channel-0 */ |
| if (port->_dmaInterruptCH0) { |
| totalLength = SMI_TS_DMA_BUF_SIZE; |
| mem = port->dma_addr[0]; |
| dmaMemPtrLow = mem & 0xffffffff; |
| dmaMemPtrHi = mem >> 32; |
| dmaCtlReg = (totalLength) | (tlpTransUnit << 22) | (tlpTc << 25) |
| | (tlpTd << 28) | (tlpEp << 29) | (tlpAttr << 30); |
| dmaManagement |= dmaChanEnable | (dmaTransStart << 1) |
| | (chanLatencyTimer << 8); |
| /* write DMA register, start DMA engine */ |
| smi_write(port->DMA_CHAN0_ADDR_LOW, dmaMemPtrLow); |
| smi_write(port->DMA_CHAN0_ADDR_HI, dmaMemPtrHi); |
| smi_write(port->DMA_CHAN0_CONTROL, dmaCtlReg); |
| } |
| /* Setup Channel-1 */ |
| if (port->_dmaInterruptCH1) { |
| totalLength = SMI_TS_DMA_BUF_SIZE; |
| mem = port->dma_addr[1]; |
| dmaMemPtrLow = mem & 0xffffffff; |
| dmaMemPtrHi = mem >> 32; |
| dmaCtlReg = (totalLength) | (tlpTransUnit << 22) | (tlpTc << 25) |
| | (tlpTd << 28) | (tlpEp << 29) | (tlpAttr << 30); |
| dmaManagement |= (dmaChanEnable << 16) | (dmaTransStart << 17) |
| | (chanLatencyTimer << 24); |
| /* write DMA register, start DMA engine */ |
| smi_write(port->DMA_CHAN1_ADDR_LOW, dmaMemPtrLow); |
| smi_write(port->DMA_CHAN1_ADDR_HI, dmaMemPtrHi); |
| smi_write(port->DMA_CHAN1_CONTROL, dmaCtlReg); |
| } |
| return dmaManagement; |
| } |
| |
| static int smi_start_feed(struct dvb_demux_feed *dvbdmxfeed) |
| { |
| struct dvb_demux *dvbdmx = dvbdmxfeed->demux; |
| struct smi_port *port = dvbdmx->priv; |
| struct smi_dev *dev = port->dev; |
| u32 dmaManagement; |
| |
| if (port->users++ == 0) { |
| dmaManagement = smi_config_DMA(port); |
| smi_port_clearInterrupt(port); |
| smi_port_enableInterrupt(port); |
| smi_write(port->DMA_MANAGEMENT, dmaManagement); |
| tasklet_enable(&port->tasklet); |
| } |
| return port->users; |
| } |
| |
| static int smi_stop_feed(struct dvb_demux_feed *dvbdmxfeed) |
| { |
| struct dvb_demux *dvbdmx = dvbdmxfeed->demux; |
| struct smi_port *port = dvbdmx->priv; |
| struct smi_dev *dev = port->dev; |
| |
| if (--port->users) |
| return port->users; |
| |
| tasklet_disable(&port->tasklet); |
| smi_port_disableInterrupt(port); |
| smi_clear(port->DMA_MANAGEMENT, 0x30003); |
| return 0; |
| } |
| |
| static int smi_dvb_init(struct smi_port *port) |
| { |
| int ret; |
| struct dvb_adapter *adap = &port->dvb_adapter; |
| struct dvb_demux *dvbdemux = &port->demux; |
| |
| dev_dbg(&port->dev->pci_dev->dev, |
| "%s, port %d\n", __func__, port->idx); |
| |
| ret = dvb_register_adapter(adap, "SMI_DVB", THIS_MODULE, |
| &port->dev->pci_dev->dev, |
| adapter_nr); |
| if (ret < 0) { |
| dev_err(&port->dev->pci_dev->dev, "Fail to register DVB adapter.\n"); |
| return ret; |
| } |
| ret = my_dvb_dmx_ts_card_init(dvbdemux, "SW demux", |
| smi_start_feed, |
| smi_stop_feed, port); |
| if (ret < 0) |
| goto err_del_dvb_register_adapter; |
| |
| ret = my_dvb_dmxdev_ts_card_init(&port->dmxdev, &port->demux, |
| &port->hw_frontend, |
| &port->mem_frontend, adap); |
| if (ret < 0) |
| goto err_del_dvb_dmx; |
| |
| ret = dvb_net_init(adap, &port->dvbnet, port->dmxdev.demux); |
| if (ret < 0) |
| goto err_del_dvb_dmxdev; |
| return 0; |
| err_del_dvb_dmxdev: |
| dvbdemux->dmx.close(&dvbdemux->dmx); |
| dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &port->hw_frontend); |
| dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &port->mem_frontend); |
| dvb_dmxdev_release(&port->dmxdev); |
| err_del_dvb_dmx: |
| dvb_dmx_release(&port->demux); |
| err_del_dvb_register_adapter: |
| dvb_unregister_adapter(&port->dvb_adapter); |
| return ret; |
| } |
| |
| static void smi_dvb_exit(struct smi_port *port) |
| { |
| struct dvb_demux *dvbdemux = &port->demux; |
| |
| dvb_net_release(&port->dvbnet); |
| |
| dvbdemux->dmx.close(&dvbdemux->dmx); |
| dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &port->hw_frontend); |
| dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &port->mem_frontend); |
| dvb_dmxdev_release(&port->dmxdev); |
| dvb_dmx_release(&port->demux); |
| |
| dvb_unregister_adapter(&port->dvb_adapter); |
| } |
| |
| static int smi_port_attach(struct smi_dev *dev, |
| struct smi_port *port, int index) |
| { |
| int ret, dmachs; |
| |
| port->dev = dev; |
| port->idx = index; |
| port->fe_type = (index == 0) ? dev->info->fe_0 : dev->info->fe_1; |
| dmachs = (index == 0) ? dev->info->ts_0 : dev->info->ts_1; |
| /* port init.*/ |
| ret = smi_port_init(port, dmachs); |
| if (ret < 0) |
| return ret; |
| /* dvb init.*/ |
| ret = smi_dvb_init(port); |
| if (ret < 0) |
| goto err_del_port_init; |
| /* fe init.*/ |
| ret = smi_fe_init(port); |
| if (ret < 0) |
| goto err_del_dvb_init; |
| return 0; |
| err_del_dvb_init: |
| smi_dvb_exit(port); |
| err_del_port_init: |
| smi_port_exit(port); |
| return ret; |
| } |
| |
| static void smi_port_detach(struct smi_port *port) |
| { |
| smi_fe_exit(port); |
| smi_dvb_exit(port); |
| smi_port_exit(port); |
| } |
| |
| static int smi_probe(struct pci_dev *pdev, const struct pci_device_id *id) |
| { |
| struct smi_dev *dev; |
| int ret = -ENOMEM; |
| |
| if (pci_enable_device(pdev) < 0) |
| return -ENODEV; |
| |
| dev = kzalloc(sizeof(struct smi_dev), GFP_KERNEL); |
| if (!dev) { |
| ret = -ENOMEM; |
| goto err_pci_disable_device; |
| } |
| |
| dev->pci_dev = pdev; |
| pci_set_drvdata(pdev, dev); |
| dev->info = (struct smi_cfg_info *) id->driver_data; |
| dev_info(&dev->pci_dev->dev, |
| "card detected: %s\n", dev->info->name); |
| |
| dev->nr = dev->info->type; |
| dev->lmmio = ioremap(pci_resource_start(dev->pci_dev, 0), |
| pci_resource_len(dev->pci_dev, 0)); |
| if (!dev->lmmio) { |
| ret = -ENOMEM; |
| goto err_kfree; |
| } |
| |
| /* should we set to 32bit DMA? */ |
| ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); |
| if (ret < 0) |
| goto err_pci_iounmap; |
| |
| pci_set_master(pdev); |
| |
| ret = smi_hw_init(dev); |
| if (ret < 0) |
| goto err_pci_iounmap; |
| |
| ret = smi_i2c_init(dev); |
| if (ret < 0) |
| goto err_pci_iounmap; |
| |
| if (dev->info->ts_0) { |
| ret = smi_port_attach(dev, &dev->ts_port[0], 0); |
| if (ret < 0) |
| goto err_del_i2c_adaptor; |
| } |
| |
| if (dev->info->ts_1) { |
| ret = smi_port_attach(dev, &dev->ts_port[1], 1); |
| if (ret < 0) |
| goto err_del_port0_attach; |
| } |
| |
| ret = smi_ir_init(dev); |
| if (ret < 0) |
| goto err_del_port1_attach; |
| |
| #ifdef CONFIG_PCI_MSI /* to do msi interrupt.???*/ |
| if (pci_msi_enabled()) |
| ret = pci_enable_msi(dev->pci_dev); |
| if (ret) |
| dev_info(&dev->pci_dev->dev, "MSI not available.\n"); |
| #endif |
| |
| ret = request_irq(dev->pci_dev->irq, smi_irq_handler, |
| IRQF_SHARED, "SMI_PCIE", dev); |
| if (ret < 0) |
| goto err_del_ir; |
| |
| smi_ir_start(&dev->ir); |
| return 0; |
| |
| err_del_ir: |
| smi_ir_exit(dev); |
| err_del_port1_attach: |
| if (dev->info->ts_1) |
| smi_port_detach(&dev->ts_port[1]); |
| err_del_port0_attach: |
| if (dev->info->ts_0) |
| smi_port_detach(&dev->ts_port[0]); |
| err_del_i2c_adaptor: |
| smi_i2c_exit(dev); |
| err_pci_iounmap: |
| iounmap(dev->lmmio); |
| err_kfree: |
| pci_set_drvdata(pdev, NULL); |
| kfree(dev); |
| err_pci_disable_device: |
| pci_disable_device(pdev); |
| return ret; |
| } |
| |
| static void smi_remove(struct pci_dev *pdev) |
| { |
| struct smi_dev *dev = pci_get_drvdata(pdev); |
| |
| smi_write(MSI_INT_ENA_CLR, ALL_INT); |
| free_irq(dev->pci_dev->irq, dev); |
| #ifdef CONFIG_PCI_MSI |
| pci_disable_msi(dev->pci_dev); |
| #endif |
| if (dev->info->ts_1) |
| smi_port_detach(&dev->ts_port[1]); |
| if (dev->info->ts_0) |
| smi_port_detach(&dev->ts_port[0]); |
| |
| smi_ir_exit(dev); |
| smi_i2c_exit(dev); |
| iounmap(dev->lmmio); |
| pci_set_drvdata(pdev, NULL); |
| pci_disable_device(pdev); |
| kfree(dev); |
| } |
| |
| /* DVBSky cards */ |
| static const struct smi_cfg_info dvbsky_s950_cfg = { |
| .type = SMI_DVBSKY_S950, |
| .name = "DVBSky S950 V3", |
| .ts_0 = SMI_TS_NULL, |
| .ts_1 = SMI_TS_DMA_BOTH, |
| .fe_0 = DVBSKY_FE_NULL, |
| .fe_1 = DVBSKY_FE_M88DS3103, |
| .rc_map = RC_MAP_DVBSKY, |
| }; |
| |
| static const struct smi_cfg_info dvbsky_s952_cfg = { |
| .type = SMI_DVBSKY_S952, |
| .name = "DVBSky S952 V3", |
| .ts_0 = SMI_TS_DMA_BOTH, |
| .ts_1 = SMI_TS_DMA_BOTH, |
| .fe_0 = DVBSKY_FE_M88RS6000, |
| .fe_1 = DVBSKY_FE_M88RS6000, |
| .rc_map = RC_MAP_DVBSKY, |
| }; |
| |
| static const struct smi_cfg_info dvbsky_t9580_cfg = { |
| .type = SMI_DVBSKY_T9580, |
| .name = "DVBSky T9580 V3", |
| .ts_0 = SMI_TS_DMA_BOTH, |
| .ts_1 = SMI_TS_DMA_BOTH, |
| .fe_0 = DVBSKY_FE_SIT2, |
| .fe_1 = DVBSKY_FE_M88DS3103, |
| .rc_map = RC_MAP_DVBSKY, |
| }; |
| |
| static const struct smi_cfg_info technotrend_s2_4200_cfg = { |
| .type = SMI_TECHNOTREND_S2_4200, |
| .name = "TechnoTrend TT-budget S2-4200 Twin", |
| .ts_0 = SMI_TS_DMA_BOTH, |
| .ts_1 = SMI_TS_DMA_BOTH, |
| .fe_0 = DVBSKY_FE_M88RS6000, |
| .fe_1 = DVBSKY_FE_M88RS6000, |
| .rc_map = RC_MAP_TT_1500, |
| }; |
| |
| /* PCI IDs */ |
| #define SMI_ID(_subvend, _subdev, _driverdata) { \ |
| .vendor = SMI_VID, .device = SMI_PID, \ |
| .subvendor = _subvend, .subdevice = _subdev, \ |
| .driver_data = (unsigned long)&_driverdata } |
| |
| static const struct pci_device_id smi_id_table[] = { |
| SMI_ID(0x4254, 0x0550, dvbsky_s950_cfg), |
| SMI_ID(0x4254, 0x0552, dvbsky_s952_cfg), |
| SMI_ID(0x4254, 0x5580, dvbsky_t9580_cfg), |
| SMI_ID(0x13c2, 0x3016, technotrend_s2_4200_cfg), |
| {0} |
| }; |
| MODULE_DEVICE_TABLE(pci, smi_id_table); |
| |
| static struct pci_driver smipcie_driver = { |
| .name = "SMI PCIe driver", |
| .id_table = smi_id_table, |
| .probe = smi_probe, |
| .remove = smi_remove, |
| }; |
| |
| module_pci_driver(smipcie_driver); |
| |
| MODULE_AUTHOR("Max nibble <nibble.max@gmail.com>"); |
| MODULE_DESCRIPTION("SMI PCIe driver"); |
| MODULE_LICENSE("GPL"); |