| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Marvell Armada 37xx SoC xtal clocks |
| * |
| * Copyright (C) 2016 Marvell |
| * |
| * Gregory CLEMENT <gregory.clement@free-electrons.com> |
| * |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| |
| #define NB_GPIO1_LATCH 0x8 |
| #define XTAL_MODE BIT(9) |
| |
| static int armada_3700_xtal_clock_probe(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| const char *xtal_name = "xtal"; |
| struct device_node *parent; |
| struct regmap *regmap; |
| struct clk_hw *xtal_hw; |
| unsigned int rate; |
| u32 reg; |
| int ret; |
| |
| xtal_hw = devm_kzalloc(&pdev->dev, sizeof(*xtal_hw), GFP_KERNEL); |
| if (!xtal_hw) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, xtal_hw); |
| |
| parent = np->parent; |
| if (!parent) { |
| dev_err(&pdev->dev, "no parent\n"); |
| return -ENODEV; |
| } |
| |
| regmap = syscon_node_to_regmap(parent); |
| if (IS_ERR(regmap)) { |
| dev_err(&pdev->dev, "cannot get regmap\n"); |
| return PTR_ERR(regmap); |
| } |
| |
| ret = regmap_read(regmap, NB_GPIO1_LATCH, ®); |
| if (ret) { |
| dev_err(&pdev->dev, "cannot read from regmap\n"); |
| return ret; |
| } |
| |
| if (reg & XTAL_MODE) |
| rate = 40000000; |
| else |
| rate = 25000000; |
| |
| of_property_read_string_index(np, "clock-output-names", 0, &xtal_name); |
| xtal_hw = clk_hw_register_fixed_rate(NULL, xtal_name, NULL, 0, rate); |
| if (IS_ERR(xtal_hw)) |
| return PTR_ERR(xtal_hw); |
| ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, xtal_hw); |
| |
| return ret; |
| } |
| |
| static void armada_3700_xtal_clock_remove(struct platform_device *pdev) |
| { |
| of_clk_del_provider(pdev->dev.of_node); |
| } |
| |
| static const struct of_device_id armada_3700_xtal_clock_of_match[] = { |
| { .compatible = "marvell,armada-3700-xtal-clock", }, |
| { } |
| }; |
| |
| static struct platform_driver armada_3700_xtal_clock_driver = { |
| .probe = armada_3700_xtal_clock_probe, |
| .remove_new = armada_3700_xtal_clock_remove, |
| .driver = { |
| .name = "marvell-armada-3700-xtal-clock", |
| .of_match_table = armada_3700_xtal_clock_of_match, |
| }, |
| }; |
| |
| builtin_platform_driver(armada_3700_xtal_clock_driver); |