| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * ACPI helpers for GPIO API |
| * |
| * Copyright (C) 2012, Intel Corporation |
| * Authors: Mathias Nyman <mathias.nyman@linux.intel.com> |
| * Mika Westerberg <mika.westerberg@linux.intel.com> |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/dmi.h> |
| #include <linux/errno.h> |
| #include <linux/export.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/mutex.h> |
| #include <linux/pinctrl/pinctrl.h> |
| |
| #include <linux/gpio/consumer.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/gpio/machine.h> |
| |
| #include "gpiolib.h" |
| #include "gpiolib-acpi.h" |
| |
| static int run_edge_events_on_boot = -1; |
| module_param(run_edge_events_on_boot, int, 0444); |
| MODULE_PARM_DESC(run_edge_events_on_boot, |
| "Run edge _AEI event-handlers at boot: 0=no, 1=yes, -1=auto"); |
| |
| static char *ignore_wake; |
| module_param(ignore_wake, charp, 0444); |
| MODULE_PARM_DESC(ignore_wake, |
| "controller@pin combos on which to ignore the ACPI wake flag " |
| "ignore_wake=controller@pin[,controller@pin[,...]]"); |
| |
| static char *ignore_interrupt; |
| module_param(ignore_interrupt, charp, 0444); |
| MODULE_PARM_DESC(ignore_interrupt, |
| "controller@pin combos on which to ignore interrupt " |
| "ignore_interrupt=controller@pin[,controller@pin[,...]]"); |
| |
| struct acpi_gpiolib_dmi_quirk { |
| bool no_edge_events_on_boot; |
| char *ignore_wake; |
| char *ignore_interrupt; |
| }; |
| |
| /** |
| * struct acpi_gpio_event - ACPI GPIO event handler data |
| * |
| * @node: list-entry of the events list of the struct acpi_gpio_chip |
| * @handle: handle of ACPI method to execute when the IRQ triggers |
| * @handler: handler function to pass to request_irq() when requesting the IRQ |
| * @pin: GPIO pin number on the struct gpio_chip |
| * @irq: Linux IRQ number for the event, for request_irq() / free_irq() |
| * @irqflags: flags to pass to request_irq() when requesting the IRQ |
| * @irq_is_wake: If the ACPI flags indicate the IRQ is a wakeup source |
| * @irq_requested:True if request_irq() has been done |
| * @desc: struct gpio_desc for the GPIO pin for this event |
| */ |
| struct acpi_gpio_event { |
| struct list_head node; |
| acpi_handle handle; |
| irq_handler_t handler; |
| unsigned int pin; |
| unsigned int irq; |
| unsigned long irqflags; |
| bool irq_is_wake; |
| bool irq_requested; |
| struct gpio_desc *desc; |
| }; |
| |
| struct acpi_gpio_connection { |
| struct list_head node; |
| unsigned int pin; |
| struct gpio_desc *desc; |
| }; |
| |
| struct acpi_gpio_chip { |
| /* |
| * ACPICA requires that the first field of the context parameter |
| * passed to acpi_install_address_space_handler() is large enough |
| * to hold struct acpi_connection_info. |
| */ |
| struct acpi_connection_info conn_info; |
| struct list_head conns; |
| struct mutex conn_lock; |
| struct gpio_chip *chip; |
| struct list_head events; |
| struct list_head deferred_req_irqs_list_entry; |
| }; |
| |
| /** |
| * struct acpi_gpio_info - ACPI GPIO specific information |
| * @adev: reference to ACPI device which consumes GPIO resource |
| * @flags: GPIO initialization flags |
| * @gpioint: if %true this GPIO is of type GpioInt otherwise type is GpioIo |
| * @pin_config: pin bias as provided by ACPI |
| * @polarity: interrupt polarity as provided by ACPI |
| * @triggering: triggering type as provided by ACPI |
| * @wake_capable: wake capability as provided by ACPI |
| * @debounce: debounce timeout as provided by ACPI |
| * @quirks: Linux specific quirks as provided by struct acpi_gpio_mapping |
| */ |
| struct acpi_gpio_info { |
| struct acpi_device *adev; |
| enum gpiod_flags flags; |
| bool gpioint; |
| int pin_config; |
| int polarity; |
| int triggering; |
| bool wake_capable; |
| unsigned int debounce; |
| unsigned int quirks; |
| }; |
| |
| /* |
| * For GPIO chips which call acpi_gpiochip_request_interrupts() before late_init |
| * (so builtin drivers) we register the ACPI GpioInt IRQ handlers from a |
| * late_initcall_sync() handler, so that other builtin drivers can register their |
| * OpRegions before the event handlers can run. This list contains GPIO chips |
| * for which the acpi_gpiochip_request_irqs() call has been deferred. |
| */ |
| static DEFINE_MUTEX(acpi_gpio_deferred_req_irqs_lock); |
| static LIST_HEAD(acpi_gpio_deferred_req_irqs_list); |
| static bool acpi_gpio_deferred_req_irqs_done; |
| |
| static int acpi_gpiochip_find(struct gpio_chip *gc, void *data) |
| { |
| return device_match_acpi_handle(&gc->gpiodev->dev, data); |
| } |
| |
| /** |
| * acpi_get_gpiod() - Translate ACPI GPIO pin to GPIO descriptor usable with GPIO API |
| * @path: ACPI GPIO controller full path name, (e.g. "\\_SB.GPO1") |
| * @pin: ACPI GPIO pin number (0-based, controller-relative) |
| * |
| * Return: GPIO descriptor to use with Linux generic GPIO API, or ERR_PTR |
| * error value. Specifically returns %-EPROBE_DEFER if the referenced GPIO |
| * controller does not have GPIO chip registered at the moment. This is to |
| * support probe deferral. |
| */ |
| static struct gpio_desc *acpi_get_gpiod(char *path, unsigned int pin) |
| { |
| acpi_handle handle; |
| acpi_status status; |
| |
| status = acpi_get_handle(NULL, path, &handle); |
| if (ACPI_FAILURE(status)) |
| return ERR_PTR(-ENODEV); |
| |
| struct gpio_device *gdev __free(gpio_device_put) = |
| gpio_device_find(handle, acpi_gpiochip_find); |
| if (!gdev) |
| return ERR_PTR(-EPROBE_DEFER); |
| |
| /* |
| * FIXME: keep track of the reference to the GPIO device somehow |
| * instead of putting it here. |
| */ |
| return gpio_device_get_desc(gdev, pin); |
| } |
| |
| static irqreturn_t acpi_gpio_irq_handler(int irq, void *data) |
| { |
| struct acpi_gpio_event *event = data; |
| |
| acpi_evaluate_object(event->handle, NULL, NULL, NULL); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t acpi_gpio_irq_handler_evt(int irq, void *data) |
| { |
| struct acpi_gpio_event *event = data; |
| |
| acpi_execute_simple_method(event->handle, NULL, event->pin); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void acpi_gpio_chip_dh(acpi_handle handle, void *data) |
| { |
| /* The address of this function is used as a key. */ |
| } |
| |
| bool acpi_gpio_get_irq_resource(struct acpi_resource *ares, |
| struct acpi_resource_gpio **agpio) |
| { |
| struct acpi_resource_gpio *gpio; |
| |
| if (ares->type != ACPI_RESOURCE_TYPE_GPIO) |
| return false; |
| |
| gpio = &ares->data.gpio; |
| if (gpio->connection_type != ACPI_RESOURCE_GPIO_TYPE_INT) |
| return false; |
| |
| *agpio = gpio; |
| return true; |
| } |
| EXPORT_SYMBOL_GPL(acpi_gpio_get_irq_resource); |
| |
| /** |
| * acpi_gpio_get_io_resource - Fetch details of an ACPI resource if it is a GPIO |
| * I/O resource or return False if not. |
| * @ares: Pointer to the ACPI resource to fetch |
| * @agpio: Pointer to a &struct acpi_resource_gpio to store the output pointer |
| */ |
| bool acpi_gpio_get_io_resource(struct acpi_resource *ares, |
| struct acpi_resource_gpio **agpio) |
| { |
| struct acpi_resource_gpio *gpio; |
| |
| if (ares->type != ACPI_RESOURCE_TYPE_GPIO) |
| return false; |
| |
| gpio = &ares->data.gpio; |
| if (gpio->connection_type != ACPI_RESOURCE_GPIO_TYPE_IO) |
| return false; |
| |
| *agpio = gpio; |
| return true; |
| } |
| EXPORT_SYMBOL_GPL(acpi_gpio_get_io_resource); |
| |
| static void acpi_gpiochip_request_irq(struct acpi_gpio_chip *acpi_gpio, |
| struct acpi_gpio_event *event) |
| { |
| struct device *parent = acpi_gpio->chip->parent; |
| int ret, value; |
| |
| ret = request_threaded_irq(event->irq, NULL, event->handler, |
| event->irqflags | IRQF_ONESHOT, "ACPI:Event", event); |
| if (ret) { |
| dev_err(parent, "Failed to setup interrupt handler for %d\n", event->irq); |
| return; |
| } |
| |
| if (event->irq_is_wake) |
| enable_irq_wake(event->irq); |
| |
| event->irq_requested = true; |
| |
| /* Make sure we trigger the initial state of edge-triggered IRQs */ |
| if (run_edge_events_on_boot && |
| (event->irqflags & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING))) { |
| value = gpiod_get_raw_value_cansleep(event->desc); |
| if (((event->irqflags & IRQF_TRIGGER_RISING) && value == 1) || |
| ((event->irqflags & IRQF_TRIGGER_FALLING) && value == 0)) |
| event->handler(event->irq, event); |
| } |
| } |
| |
| static void acpi_gpiochip_request_irqs(struct acpi_gpio_chip *acpi_gpio) |
| { |
| struct acpi_gpio_event *event; |
| |
| list_for_each_entry(event, &acpi_gpio->events, node) |
| acpi_gpiochip_request_irq(acpi_gpio, event); |
| } |
| |
| static enum gpiod_flags |
| acpi_gpio_to_gpiod_flags(const struct acpi_resource_gpio *agpio, int polarity) |
| { |
| /* GpioInt() implies input configuration */ |
| if (agpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT) |
| return GPIOD_IN; |
| |
| switch (agpio->io_restriction) { |
| case ACPI_IO_RESTRICT_INPUT: |
| return GPIOD_IN; |
| case ACPI_IO_RESTRICT_OUTPUT: |
| /* |
| * ACPI GPIO resources don't contain an initial value for the |
| * GPIO. Therefore we deduce that value from the pull field |
| * and the polarity instead. If the pin is pulled up we assume |
| * default to be high, if it is pulled down we assume default |
| * to be low, otherwise we leave pin untouched. For active low |
| * polarity values will be switched. See also |
| * Documentation/firmware-guide/acpi/gpio-properties.rst. |
| */ |
| switch (agpio->pin_config) { |
| case ACPI_PIN_CONFIG_PULLUP: |
| return polarity == GPIO_ACTIVE_LOW ? GPIOD_OUT_LOW : GPIOD_OUT_HIGH; |
| case ACPI_PIN_CONFIG_PULLDOWN: |
| return polarity == GPIO_ACTIVE_LOW ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW; |
| default: |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| /* |
| * Assume that the BIOS has configured the direction and pull |
| * accordingly. |
| */ |
| return GPIOD_ASIS; |
| } |
| |
| static struct gpio_desc *acpi_request_own_gpiod(struct gpio_chip *chip, |
| struct acpi_resource_gpio *agpio, |
| unsigned int index, |
| const char *label) |
| { |
| int polarity = GPIO_ACTIVE_HIGH; |
| enum gpiod_flags flags = acpi_gpio_to_gpiod_flags(agpio, polarity); |
| unsigned int pin = agpio->pin_table[index]; |
| struct gpio_desc *desc; |
| int ret; |
| |
| desc = gpiochip_request_own_desc(chip, pin, label, polarity, flags); |
| if (IS_ERR(desc)) |
| return desc; |
| |
| /* ACPI uses hundredths of milliseconds units */ |
| ret = gpio_set_debounce_timeout(desc, agpio->debounce_timeout * 10); |
| if (ret) |
| dev_warn(chip->parent, |
| "Failed to set debounce-timeout for pin 0x%04X, err %d\n", |
| pin, ret); |
| |
| return desc; |
| } |
| |
| static bool acpi_gpio_in_ignore_list(const char *ignore_list, const char *controller_in, |
| unsigned int pin_in) |
| { |
| const char *controller, *pin_str; |
| unsigned int pin; |
| char *endp; |
| int len; |
| |
| controller = ignore_list; |
| while (controller) { |
| pin_str = strchr(controller, '@'); |
| if (!pin_str) |
| goto err; |
| |
| len = pin_str - controller; |
| if (len == strlen(controller_in) && |
| strncmp(controller, controller_in, len) == 0) { |
| pin = simple_strtoul(pin_str + 1, &endp, 10); |
| if (*endp != 0 && *endp != ',') |
| goto err; |
| |
| if (pin == pin_in) |
| return true; |
| } |
| |
| controller = strchr(controller, ','); |
| if (controller) |
| controller++; |
| } |
| |
| return false; |
| err: |
| pr_err_once("Error: Invalid value for gpiolib_acpi.ignore_...: %s\n", ignore_list); |
| return false; |
| } |
| |
| static bool acpi_gpio_irq_is_wake(struct device *parent, |
| const struct acpi_resource_gpio *agpio) |
| { |
| unsigned int pin = agpio->pin_table[0]; |
| |
| if (agpio->wake_capable != ACPI_WAKE_CAPABLE) |
| return false; |
| |
| if (acpi_gpio_in_ignore_list(ignore_wake, dev_name(parent), pin)) { |
| dev_info(parent, "Ignoring wakeup on pin %u\n", pin); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /* Always returns AE_OK so that we keep looping over the resources */ |
| static acpi_status acpi_gpiochip_alloc_event(struct acpi_resource *ares, |
| void *context) |
| { |
| struct acpi_gpio_chip *acpi_gpio = context; |
| struct gpio_chip *chip = acpi_gpio->chip; |
| struct acpi_resource_gpio *agpio; |
| acpi_handle handle, evt_handle; |
| struct acpi_gpio_event *event; |
| irq_handler_t handler = NULL; |
| struct gpio_desc *desc; |
| unsigned int pin; |
| int ret, irq; |
| |
| if (!acpi_gpio_get_irq_resource(ares, &agpio)) |
| return AE_OK; |
| |
| handle = ACPI_HANDLE(chip->parent); |
| pin = agpio->pin_table[0]; |
| |
| if (pin <= 255) { |
| char ev_name[8]; |
| sprintf(ev_name, "_%c%02X", |
| agpio->triggering == ACPI_EDGE_SENSITIVE ? 'E' : 'L', |
| pin); |
| if (ACPI_SUCCESS(acpi_get_handle(handle, ev_name, &evt_handle))) |
| handler = acpi_gpio_irq_handler; |
| } |
| if (!handler) { |
| if (ACPI_SUCCESS(acpi_get_handle(handle, "_EVT", &evt_handle))) |
| handler = acpi_gpio_irq_handler_evt; |
| } |
| if (!handler) |
| return AE_OK; |
| |
| if (acpi_gpio_in_ignore_list(ignore_interrupt, dev_name(chip->parent), pin)) { |
| dev_info(chip->parent, "Ignoring interrupt on pin %u\n", pin); |
| return AE_OK; |
| } |
| |
| desc = acpi_request_own_gpiod(chip, agpio, 0, "ACPI:Event"); |
| if (IS_ERR(desc)) { |
| dev_err(chip->parent, |
| "Failed to request GPIO for pin 0x%04X, err %ld\n", |
| pin, PTR_ERR(desc)); |
| return AE_OK; |
| } |
| |
| ret = gpiochip_lock_as_irq(chip, pin); |
| if (ret) { |
| dev_err(chip->parent, |
| "Failed to lock GPIO pin 0x%04X as interrupt, err %d\n", |
| pin, ret); |
| goto fail_free_desc; |
| } |
| |
| irq = gpiod_to_irq(desc); |
| if (irq < 0) { |
| dev_err(chip->parent, |
| "Failed to translate GPIO pin 0x%04X to IRQ, err %d\n", |
| pin, irq); |
| goto fail_unlock_irq; |
| } |
| |
| event = kzalloc(sizeof(*event), GFP_KERNEL); |
| if (!event) |
| goto fail_unlock_irq; |
| |
| event->irqflags = IRQF_ONESHOT; |
| if (agpio->triggering == ACPI_LEVEL_SENSITIVE) { |
| if (agpio->polarity == ACPI_ACTIVE_HIGH) |
| event->irqflags |= IRQF_TRIGGER_HIGH; |
| else |
| event->irqflags |= IRQF_TRIGGER_LOW; |
| } else { |
| switch (agpio->polarity) { |
| case ACPI_ACTIVE_HIGH: |
| event->irqflags |= IRQF_TRIGGER_RISING; |
| break; |
| case ACPI_ACTIVE_LOW: |
| event->irqflags |= IRQF_TRIGGER_FALLING; |
| break; |
| default: |
| event->irqflags |= IRQF_TRIGGER_RISING | |
| IRQF_TRIGGER_FALLING; |
| break; |
| } |
| } |
| |
| event->handle = evt_handle; |
| event->handler = handler; |
| event->irq = irq; |
| event->irq_is_wake = acpi_gpio_irq_is_wake(chip->parent, agpio); |
| event->pin = pin; |
| event->desc = desc; |
| |
| list_add_tail(&event->node, &acpi_gpio->events); |
| |
| return AE_OK; |
| |
| fail_unlock_irq: |
| gpiochip_unlock_as_irq(chip, pin); |
| fail_free_desc: |
| gpiochip_free_own_desc(desc); |
| |
| return AE_OK; |
| } |
| |
| /** |
| * acpi_gpiochip_request_interrupts() - Register isr for gpio chip ACPI events |
| * @chip: GPIO chip |
| * |
| * ACPI5 platforms can use GPIO signaled ACPI events. These GPIO interrupts are |
| * handled by ACPI event methods which need to be called from the GPIO |
| * chip's interrupt handler. acpi_gpiochip_request_interrupts() finds out which |
| * GPIO pins have ACPI event methods and assigns interrupt handlers that calls |
| * the ACPI event methods for those pins. |
| */ |
| void acpi_gpiochip_request_interrupts(struct gpio_chip *chip) |
| { |
| struct acpi_gpio_chip *acpi_gpio; |
| acpi_handle handle; |
| acpi_status status; |
| bool defer; |
| |
| if (!chip->parent || !chip->to_irq) |
| return; |
| |
| handle = ACPI_HANDLE(chip->parent); |
| if (!handle) |
| return; |
| |
| status = acpi_get_data(handle, acpi_gpio_chip_dh, (void **)&acpi_gpio); |
| if (ACPI_FAILURE(status)) |
| return; |
| |
| if (acpi_quirk_skip_gpio_event_handlers()) |
| return; |
| |
| acpi_walk_resources(handle, METHOD_NAME__AEI, |
| acpi_gpiochip_alloc_event, acpi_gpio); |
| |
| mutex_lock(&acpi_gpio_deferred_req_irqs_lock); |
| defer = !acpi_gpio_deferred_req_irqs_done; |
| if (defer) |
| list_add(&acpi_gpio->deferred_req_irqs_list_entry, |
| &acpi_gpio_deferred_req_irqs_list); |
| mutex_unlock(&acpi_gpio_deferred_req_irqs_lock); |
| |
| if (defer) |
| return; |
| |
| acpi_gpiochip_request_irqs(acpi_gpio); |
| } |
| EXPORT_SYMBOL_GPL(acpi_gpiochip_request_interrupts); |
| |
| /** |
| * acpi_gpiochip_free_interrupts() - Free GPIO ACPI event interrupts. |
| * @chip: GPIO chip |
| * |
| * Free interrupts associated with GPIO ACPI event method for the given |
| * GPIO chip. |
| */ |
| void acpi_gpiochip_free_interrupts(struct gpio_chip *chip) |
| { |
| struct acpi_gpio_chip *acpi_gpio; |
| struct acpi_gpio_event *event, *ep; |
| acpi_handle handle; |
| acpi_status status; |
| |
| if (!chip->parent || !chip->to_irq) |
| return; |
| |
| handle = ACPI_HANDLE(chip->parent); |
| if (!handle) |
| return; |
| |
| status = acpi_get_data(handle, acpi_gpio_chip_dh, (void **)&acpi_gpio); |
| if (ACPI_FAILURE(status)) |
| return; |
| |
| mutex_lock(&acpi_gpio_deferred_req_irqs_lock); |
| if (!list_empty(&acpi_gpio->deferred_req_irqs_list_entry)) |
| list_del_init(&acpi_gpio->deferred_req_irqs_list_entry); |
| mutex_unlock(&acpi_gpio_deferred_req_irqs_lock); |
| |
| list_for_each_entry_safe_reverse(event, ep, &acpi_gpio->events, node) { |
| if (event->irq_requested) { |
| if (event->irq_is_wake) |
| disable_irq_wake(event->irq); |
| |
| free_irq(event->irq, event); |
| } |
| |
| gpiochip_unlock_as_irq(chip, event->pin); |
| gpiochip_free_own_desc(event->desc); |
| list_del(&event->node); |
| kfree(event); |
| } |
| } |
| EXPORT_SYMBOL_GPL(acpi_gpiochip_free_interrupts); |
| |
| int acpi_dev_add_driver_gpios(struct acpi_device *adev, |
| const struct acpi_gpio_mapping *gpios) |
| { |
| if (adev && gpios) { |
| adev->driver_gpios = gpios; |
| return 0; |
| } |
| return -EINVAL; |
| } |
| EXPORT_SYMBOL_GPL(acpi_dev_add_driver_gpios); |
| |
| void acpi_dev_remove_driver_gpios(struct acpi_device *adev) |
| { |
| if (adev) |
| adev->driver_gpios = NULL; |
| } |
| EXPORT_SYMBOL_GPL(acpi_dev_remove_driver_gpios); |
| |
| static void acpi_dev_release_driver_gpios(void *adev) |
| { |
| acpi_dev_remove_driver_gpios(adev); |
| } |
| |
| int devm_acpi_dev_add_driver_gpios(struct device *dev, |
| const struct acpi_gpio_mapping *gpios) |
| { |
| struct acpi_device *adev = ACPI_COMPANION(dev); |
| int ret; |
| |
| ret = acpi_dev_add_driver_gpios(adev, gpios); |
| if (ret) |
| return ret; |
| |
| return devm_add_action_or_reset(dev, acpi_dev_release_driver_gpios, adev); |
| } |
| EXPORT_SYMBOL_GPL(devm_acpi_dev_add_driver_gpios); |
| |
| static bool acpi_get_driver_gpio_data(struct acpi_device *adev, |
| const char *name, int index, |
| struct fwnode_reference_args *args, |
| unsigned int *quirks) |
| { |
| const struct acpi_gpio_mapping *gm; |
| |
| if (!adev || !adev->driver_gpios) |
| return false; |
| |
| for (gm = adev->driver_gpios; gm->name; gm++) |
| if (!strcmp(name, gm->name) && gm->data && index < gm->size) { |
| const struct acpi_gpio_params *par = gm->data + index; |
| |
| args->fwnode = acpi_fwnode_handle(adev); |
| args->args[0] = par->crs_entry_index; |
| args->args[1] = par->line_index; |
| args->args[2] = par->active_low; |
| args->nargs = 3; |
| |
| *quirks = gm->quirks; |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static int |
| __acpi_gpio_update_gpiod_flags(enum gpiod_flags *flags, enum gpiod_flags update) |
| { |
| const enum gpiod_flags mask = |
| GPIOD_FLAGS_BIT_DIR_SET | GPIOD_FLAGS_BIT_DIR_OUT | |
| GPIOD_FLAGS_BIT_DIR_VAL; |
| int ret = 0; |
| |
| /* |
| * Check if the BIOS has IoRestriction with explicitly set direction |
| * and update @flags accordingly. Otherwise use whatever caller asked |
| * for. |
| */ |
| if (update & GPIOD_FLAGS_BIT_DIR_SET) { |
| enum gpiod_flags diff = *flags ^ update; |
| |
| /* |
| * Check if caller supplied incompatible GPIO initialization |
| * flags. |
| * |
| * Return %-EINVAL to notify that firmware has different |
| * settings and we are going to use them. |
| */ |
| if (((*flags & GPIOD_FLAGS_BIT_DIR_SET) && (diff & GPIOD_FLAGS_BIT_DIR_OUT)) || |
| ((*flags & GPIOD_FLAGS_BIT_DIR_OUT) && (diff & GPIOD_FLAGS_BIT_DIR_VAL))) |
| ret = -EINVAL; |
| *flags = (*flags & ~mask) | (update & mask); |
| } |
| return ret; |
| } |
| |
| static int acpi_gpio_update_gpiod_flags(enum gpiod_flags *flags, |
| struct acpi_gpio_info *info) |
| { |
| struct device *dev = &info->adev->dev; |
| enum gpiod_flags old = *flags; |
| int ret; |
| |
| ret = __acpi_gpio_update_gpiod_flags(&old, info->flags); |
| if (info->quirks & ACPI_GPIO_QUIRK_NO_IO_RESTRICTION) { |
| if (ret) |
| dev_warn(dev, FW_BUG "GPIO not in correct mode, fixing\n"); |
| } else { |
| if (ret) |
| dev_dbg(dev, "Override GPIO initialization flags\n"); |
| *flags = old; |
| } |
| |
| return ret; |
| } |
| |
| static int acpi_gpio_update_gpiod_lookup_flags(unsigned long *lookupflags, |
| struct acpi_gpio_info *info) |
| { |
| switch (info->pin_config) { |
| case ACPI_PIN_CONFIG_PULLUP: |
| *lookupflags |= GPIO_PULL_UP; |
| break; |
| case ACPI_PIN_CONFIG_PULLDOWN: |
| *lookupflags |= GPIO_PULL_DOWN; |
| break; |
| case ACPI_PIN_CONFIG_NOPULL: |
| *lookupflags |= GPIO_PULL_DISABLE; |
| break; |
| default: |
| break; |
| } |
| |
| if (info->polarity == GPIO_ACTIVE_LOW) |
| *lookupflags |= GPIO_ACTIVE_LOW; |
| |
| return 0; |
| } |
| |
| struct acpi_gpio_lookup { |
| struct acpi_gpio_info info; |
| int index; |
| u16 pin_index; |
| bool active_low; |
| struct gpio_desc *desc; |
| int n; |
| }; |
| |
| static int acpi_populate_gpio_lookup(struct acpi_resource *ares, void *data) |
| { |
| struct acpi_gpio_lookup *lookup = data; |
| |
| if (ares->type != ACPI_RESOURCE_TYPE_GPIO) |
| return 1; |
| |
| if (!lookup->desc) { |
| const struct acpi_resource_gpio *agpio = &ares->data.gpio; |
| bool gpioint = agpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT; |
| struct gpio_desc *desc; |
| u16 pin_index; |
| |
| if (lookup->info.quirks & ACPI_GPIO_QUIRK_ONLY_GPIOIO && gpioint) |
| lookup->index++; |
| |
| if (lookup->n++ != lookup->index) |
| return 1; |
| |
| pin_index = lookup->pin_index; |
| if (pin_index >= agpio->pin_table_length) |
| return 1; |
| |
| if (lookup->info.quirks & ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER) |
| desc = gpio_to_desc(agpio->pin_table[pin_index]); |
| else |
| desc = acpi_get_gpiod(agpio->resource_source.string_ptr, |
| agpio->pin_table[pin_index]); |
| lookup->desc = desc; |
| lookup->info.pin_config = agpio->pin_config; |
| lookup->info.debounce = agpio->debounce_timeout; |
| lookup->info.gpioint = gpioint; |
| lookup->info.wake_capable = acpi_gpio_irq_is_wake(&lookup->info.adev->dev, agpio); |
| |
| /* |
| * Polarity and triggering are only specified for GpioInt |
| * resource. |
| * Note: we expect here: |
| * - ACPI_ACTIVE_LOW == GPIO_ACTIVE_LOW |
| * - ACPI_ACTIVE_HIGH == GPIO_ACTIVE_HIGH |
| */ |
| if (lookup->info.gpioint) { |
| lookup->info.polarity = agpio->polarity; |
| lookup->info.triggering = agpio->triggering; |
| } else { |
| lookup->info.polarity = lookup->active_low; |
| } |
| |
| lookup->info.flags = acpi_gpio_to_gpiod_flags(agpio, lookup->info.polarity); |
| } |
| |
| return 1; |
| } |
| |
| static int acpi_gpio_resource_lookup(struct acpi_gpio_lookup *lookup, |
| struct acpi_gpio_info *info) |
| { |
| struct acpi_device *adev = lookup->info.adev; |
| struct list_head res_list; |
| int ret; |
| |
| INIT_LIST_HEAD(&res_list); |
| |
| ret = acpi_dev_get_resources(adev, &res_list, |
| acpi_populate_gpio_lookup, |
| lookup); |
| if (ret < 0) |
| return ret; |
| |
| acpi_dev_free_resource_list(&res_list); |
| |
| if (!lookup->desc) |
| return -ENOENT; |
| |
| if (info) |
| *info = lookup->info; |
| return 0; |
| } |
| |
| static int acpi_gpio_property_lookup(struct fwnode_handle *fwnode, |
| const char *propname, int index, |
| struct acpi_gpio_lookup *lookup) |
| { |
| struct fwnode_reference_args args; |
| unsigned int quirks = 0; |
| int ret; |
| |
| memset(&args, 0, sizeof(args)); |
| ret = __acpi_node_get_property_reference(fwnode, propname, index, 3, |
| &args); |
| if (ret) { |
| struct acpi_device *adev; |
| |
| adev = to_acpi_device_node(fwnode); |
| if (!acpi_get_driver_gpio_data(adev, propname, index, &args, &quirks)) |
| return ret; |
| } |
| /* |
| * The property was found and resolved, so need to lookup the GPIO based |
| * on returned args. |
| */ |
| if (!to_acpi_device_node(args.fwnode)) |
| return -EINVAL; |
| if (args.nargs != 3) |
| return -EPROTO; |
| |
| lookup->index = args.args[0]; |
| lookup->pin_index = args.args[1]; |
| lookup->active_low = !!args.args[2]; |
| |
| lookup->info.adev = to_acpi_device_node(args.fwnode); |
| lookup->info.quirks = quirks; |
| |
| return 0; |
| } |
| |
| /** |
| * acpi_get_gpiod_by_index() - get a GPIO descriptor from device resources |
| * @adev: pointer to a ACPI device to get GPIO from |
| * @propname: Property name of the GPIO (optional) |
| * @index: index of GpioIo/GpioInt resource (starting from %0) |
| * @info: info pointer to fill in (optional) |
| * |
| * Function goes through ACPI resources for @adev and based on @index looks |
| * up a GpioIo/GpioInt resource, translates it to the Linux GPIO descriptor, |
| * and returns it. @index matches GpioIo/GpioInt resources only so if there |
| * are total %3 GPIO resources, the index goes from %0 to %2. |
| * |
| * If @propname is specified the GPIO is looked using device property. In |
| * that case @index is used to select the GPIO entry in the property value |
| * (in case of multiple). |
| * |
| * If the GPIO cannot be translated or there is an error, an ERR_PTR is |
| * returned. |
| * |
| * Note: if the GPIO resource has multiple entries in the pin list, this |
| * function only returns the first. |
| */ |
| static struct gpio_desc *acpi_get_gpiod_by_index(struct acpi_device *adev, |
| const char *propname, |
| int index, |
| struct acpi_gpio_info *info) |
| { |
| struct acpi_gpio_lookup lookup; |
| int ret; |
| |
| if (!adev) |
| return ERR_PTR(-ENODEV); |
| |
| memset(&lookup, 0, sizeof(lookup)); |
| lookup.index = index; |
| |
| if (propname) { |
| dev_dbg(&adev->dev, "GPIO: looking up %s\n", propname); |
| |
| ret = acpi_gpio_property_lookup(acpi_fwnode_handle(adev), |
| propname, index, &lookup); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| dev_dbg(&adev->dev, "GPIO: _DSD returned %s %d %u %u\n", |
| dev_name(&lookup.info.adev->dev), lookup.index, |
| lookup.pin_index, lookup.active_low); |
| } else { |
| dev_dbg(&adev->dev, "GPIO: looking up %d in _CRS\n", index); |
| lookup.info.adev = adev; |
| } |
| |
| ret = acpi_gpio_resource_lookup(&lookup, info); |
| return ret ? ERR_PTR(ret) : lookup.desc; |
| } |
| |
| /** |
| * acpi_get_gpiod_from_data() - get a GPIO descriptor from ACPI data node |
| * @fwnode: pointer to an ACPI firmware node to get the GPIO information from |
| * @propname: Property name of the GPIO |
| * @index: index of GpioIo/GpioInt resource (starting from %0) |
| * @info: info pointer to fill in (optional) |
| * |
| * This function uses the property-based GPIO lookup to get to the GPIO |
| * resource with the relevant information from a data-only ACPI firmware node |
| * and uses that to obtain the GPIO descriptor to return. |
| * |
| * If the GPIO cannot be translated or there is an error an ERR_PTR is |
| * returned. |
| */ |
| static struct gpio_desc *acpi_get_gpiod_from_data(struct fwnode_handle *fwnode, |
| const char *propname, |
| int index, |
| struct acpi_gpio_info *info) |
| { |
| struct acpi_gpio_lookup lookup; |
| int ret; |
| |
| if (!is_acpi_data_node(fwnode)) |
| return ERR_PTR(-ENODEV); |
| |
| if (!propname) |
| return ERR_PTR(-EINVAL); |
| |
| memset(&lookup, 0, sizeof(lookup)); |
| lookup.index = index; |
| |
| ret = acpi_gpio_property_lookup(fwnode, propname, index, &lookup); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| ret = acpi_gpio_resource_lookup(&lookup, info); |
| return ret ? ERR_PTR(ret) : lookup.desc; |
| } |
| |
| static bool acpi_can_fallback_to_crs(struct acpi_device *adev, |
| const char *con_id) |
| { |
| /* Never allow fallback if the device has properties */ |
| if (acpi_dev_has_props(adev) || adev->driver_gpios) |
| return false; |
| |
| return con_id == NULL; |
| } |
| |
| struct gpio_desc *acpi_find_gpio(struct fwnode_handle *fwnode, |
| const char *con_id, |
| unsigned int idx, |
| enum gpiod_flags *dflags, |
| unsigned long *lookupflags) |
| { |
| struct acpi_device *adev = to_acpi_device_node(fwnode); |
| struct acpi_gpio_info info; |
| struct gpio_desc *desc; |
| char propname[32]; |
| int i; |
| |
| /* Try first from _DSD */ |
| for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) { |
| if (con_id) { |
| snprintf(propname, sizeof(propname), "%s-%s", |
| con_id, gpio_suffixes[i]); |
| } else { |
| snprintf(propname, sizeof(propname), "%s", |
| gpio_suffixes[i]); |
| } |
| |
| if (adev) |
| desc = acpi_get_gpiod_by_index(adev, |
| propname, idx, &info); |
| else |
| desc = acpi_get_gpiod_from_data(fwnode, |
| propname, idx, &info); |
| if (!IS_ERR(desc)) |
| break; |
| if (PTR_ERR(desc) == -EPROBE_DEFER) |
| return ERR_CAST(desc); |
| } |
| |
| /* Then from plain _CRS GPIOs */ |
| if (IS_ERR(desc)) { |
| if (!adev || !acpi_can_fallback_to_crs(adev, con_id)) |
| return ERR_PTR(-ENOENT); |
| |
| desc = acpi_get_gpiod_by_index(adev, NULL, idx, &info); |
| if (IS_ERR(desc)) |
| return desc; |
| } |
| |
| if (info.gpioint && |
| (*dflags == GPIOD_OUT_LOW || *dflags == GPIOD_OUT_HIGH)) { |
| dev_dbg(&adev->dev, "refusing GpioInt() entry when doing GPIOD_OUT_* lookup\n"); |
| return ERR_PTR(-ENOENT); |
| } |
| |
| acpi_gpio_update_gpiod_flags(dflags, &info); |
| acpi_gpio_update_gpiod_lookup_flags(lookupflags, &info); |
| return desc; |
| } |
| |
| /** |
| * acpi_dev_gpio_irq_wake_get_by() - Find GpioInt and translate it to Linux IRQ number |
| * @adev: pointer to a ACPI device to get IRQ from |
| * @name: optional name of GpioInt resource |
| * @index: index of GpioInt resource (starting from %0) |
| * @wake_capable: Set to true if the IRQ is wake capable |
| * |
| * If the device has one or more GpioInt resources, this function can be |
| * used to translate from the GPIO offset in the resource to the Linux IRQ |
| * number. |
| * |
| * The function is idempotent, though each time it runs it will configure GPIO |
| * pin direction according to the flags in GpioInt resource. |
| * |
| * The function takes optional @name parameter. If the resource has a property |
| * name, then only those will be taken into account. |
| * |
| * The GPIO is considered wake capable if the GpioInt resource specifies |
| * SharedAndWake or ExclusiveAndWake. |
| * |
| * Return: Linux IRQ number (> %0) on success, negative errno on failure. |
| */ |
| int acpi_dev_gpio_irq_wake_get_by(struct acpi_device *adev, const char *name, int index, |
| bool *wake_capable) |
| { |
| int idx, i; |
| unsigned int irq_flags; |
| int ret; |
| |
| for (i = 0, idx = 0; idx <= index; i++) { |
| struct acpi_gpio_info info; |
| struct gpio_desc *desc; |
| |
| desc = acpi_get_gpiod_by_index(adev, name, i, &info); |
| |
| /* Ignore -EPROBE_DEFER, it only matters if idx matches */ |
| if (IS_ERR(desc) && PTR_ERR(desc) != -EPROBE_DEFER) |
| return PTR_ERR(desc); |
| |
| if (info.gpioint && idx++ == index) { |
| unsigned long lflags = GPIO_LOOKUP_FLAGS_DEFAULT; |
| enum gpiod_flags dflags = GPIOD_ASIS; |
| char label[32]; |
| int irq; |
| |
| if (IS_ERR(desc)) |
| return PTR_ERR(desc); |
| |
| irq = gpiod_to_irq(desc); |
| if (irq < 0) |
| return irq; |
| |
| acpi_gpio_update_gpiod_flags(&dflags, &info); |
| acpi_gpio_update_gpiod_lookup_flags(&lflags, &info); |
| |
| snprintf(label, sizeof(label), "GpioInt() %d", index); |
| ret = gpiod_configure_flags(desc, label, lflags, dflags); |
| if (ret < 0) |
| return ret; |
| |
| /* ACPI uses hundredths of milliseconds units */ |
| ret = gpio_set_debounce_timeout(desc, info.debounce * 10); |
| if (ret) |
| return ret; |
| |
| irq_flags = acpi_dev_get_irq_type(info.triggering, |
| info.polarity); |
| |
| /* |
| * If the IRQ is not already in use then set type |
| * if specified and different than the current one. |
| */ |
| if (can_request_irq(irq, irq_flags)) { |
| if (irq_flags != IRQ_TYPE_NONE && |
| irq_flags != irq_get_trigger_type(irq)) |
| irq_set_irq_type(irq, irq_flags); |
| } else { |
| dev_dbg(&adev->dev, "IRQ %d already in use\n", irq); |
| } |
| |
| /* avoid suspend issues with GPIOs when systems are using S3 */ |
| if (wake_capable && acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0) |
| *wake_capable = info.wake_capable; |
| |
| return irq; |
| } |
| |
| } |
| return -ENOENT; |
| } |
| EXPORT_SYMBOL_GPL(acpi_dev_gpio_irq_wake_get_by); |
| |
| static acpi_status |
| acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address, |
| u32 bits, u64 *value, void *handler_context, |
| void *region_context) |
| { |
| struct acpi_gpio_chip *achip = region_context; |
| struct gpio_chip *chip = achip->chip; |
| struct acpi_resource_gpio *agpio; |
| struct acpi_resource *ares; |
| u16 pin_index = address; |
| acpi_status status; |
| int length; |
| int i; |
| |
| status = acpi_buffer_to_resource(achip->conn_info.connection, |
| achip->conn_info.length, &ares); |
| if (ACPI_FAILURE(status)) |
| return status; |
| |
| if (WARN_ON(ares->type != ACPI_RESOURCE_TYPE_GPIO)) { |
| ACPI_FREE(ares); |
| return AE_BAD_PARAMETER; |
| } |
| |
| agpio = &ares->data.gpio; |
| |
| if (WARN_ON(agpio->io_restriction == ACPI_IO_RESTRICT_INPUT && |
| function == ACPI_WRITE)) { |
| ACPI_FREE(ares); |
| return AE_BAD_PARAMETER; |
| } |
| |
| length = min_t(u16, agpio->pin_table_length, pin_index + bits); |
| for (i = pin_index; i < length; ++i) { |
| unsigned int pin = agpio->pin_table[i]; |
| struct acpi_gpio_connection *conn; |
| struct gpio_desc *desc; |
| bool found; |
| |
| mutex_lock(&achip->conn_lock); |
| |
| found = false; |
| list_for_each_entry(conn, &achip->conns, node) { |
| if (conn->pin == pin) { |
| found = true; |
| desc = conn->desc; |
| break; |
| } |
| } |
| |
| /* |
| * The same GPIO can be shared between operation region and |
| * event but only if the access here is ACPI_READ. In that |
| * case we "borrow" the event GPIO instead. |
| */ |
| if (!found && agpio->shareable == ACPI_SHARED && |
| function == ACPI_READ) { |
| struct acpi_gpio_event *event; |
| |
| list_for_each_entry(event, &achip->events, node) { |
| if (event->pin == pin) { |
| desc = event->desc; |
| found = true; |
| break; |
| } |
| } |
| } |
| |
| if (!found) { |
| desc = acpi_request_own_gpiod(chip, agpio, i, "ACPI:OpRegion"); |
| if (IS_ERR(desc)) { |
| mutex_unlock(&achip->conn_lock); |
| status = AE_ERROR; |
| goto out; |
| } |
| |
| conn = kzalloc(sizeof(*conn), GFP_KERNEL); |
| if (!conn) { |
| gpiochip_free_own_desc(desc); |
| mutex_unlock(&achip->conn_lock); |
| status = AE_NO_MEMORY; |
| goto out; |
| } |
| |
| conn->pin = pin; |
| conn->desc = desc; |
| list_add_tail(&conn->node, &achip->conns); |
| } |
| |
| mutex_unlock(&achip->conn_lock); |
| |
| if (function == ACPI_WRITE) |
| gpiod_set_raw_value_cansleep(desc, !!(*value & BIT(i))); |
| else |
| *value |= (u64)gpiod_get_raw_value_cansleep(desc) << i; |
| } |
| |
| out: |
| ACPI_FREE(ares); |
| return status; |
| } |
| |
| static void acpi_gpiochip_request_regions(struct acpi_gpio_chip *achip) |
| { |
| struct gpio_chip *chip = achip->chip; |
| acpi_handle handle = ACPI_HANDLE(chip->parent); |
| acpi_status status; |
| |
| INIT_LIST_HEAD(&achip->conns); |
| mutex_init(&achip->conn_lock); |
| status = acpi_install_address_space_handler(handle, ACPI_ADR_SPACE_GPIO, |
| acpi_gpio_adr_space_handler, |
| NULL, achip); |
| if (ACPI_FAILURE(status)) |
| dev_err(chip->parent, |
| "Failed to install GPIO OpRegion handler\n"); |
| } |
| |
| static void acpi_gpiochip_free_regions(struct acpi_gpio_chip *achip) |
| { |
| struct gpio_chip *chip = achip->chip; |
| acpi_handle handle = ACPI_HANDLE(chip->parent); |
| struct acpi_gpio_connection *conn, *tmp; |
| acpi_status status; |
| |
| status = acpi_remove_address_space_handler(handle, ACPI_ADR_SPACE_GPIO, |
| acpi_gpio_adr_space_handler); |
| if (ACPI_FAILURE(status)) { |
| dev_err(chip->parent, |
| "Failed to remove GPIO OpRegion handler\n"); |
| return; |
| } |
| |
| list_for_each_entry_safe_reverse(conn, tmp, &achip->conns, node) { |
| gpiochip_free_own_desc(conn->desc); |
| list_del(&conn->node); |
| kfree(conn); |
| } |
| } |
| |
| static struct gpio_desc * |
| acpi_gpiochip_parse_own_gpio(struct acpi_gpio_chip *achip, |
| struct fwnode_handle *fwnode, |
| const char **name, |
| unsigned long *lflags, |
| enum gpiod_flags *dflags) |
| { |
| struct gpio_chip *chip = achip->chip; |
| struct gpio_desc *desc; |
| u32 gpios[2]; |
| int ret; |
| |
| *lflags = GPIO_LOOKUP_FLAGS_DEFAULT; |
| *dflags = GPIOD_ASIS; |
| *name = NULL; |
| |
| ret = fwnode_property_read_u32_array(fwnode, "gpios", gpios, |
| ARRAY_SIZE(gpios)); |
| if (ret < 0) |
| return ERR_PTR(ret); |
| |
| desc = gpiochip_get_desc(chip, gpios[0]); |
| if (IS_ERR(desc)) |
| return desc; |
| |
| if (gpios[1]) |
| *lflags |= GPIO_ACTIVE_LOW; |
| |
| if (fwnode_property_present(fwnode, "input")) |
| *dflags |= GPIOD_IN; |
| else if (fwnode_property_present(fwnode, "output-low")) |
| *dflags |= GPIOD_OUT_LOW; |
| else if (fwnode_property_present(fwnode, "output-high")) |
| *dflags |= GPIOD_OUT_HIGH; |
| else |
| return ERR_PTR(-EINVAL); |
| |
| fwnode_property_read_string(fwnode, "line-name", name); |
| |
| return desc; |
| } |
| |
| static void acpi_gpiochip_scan_gpios(struct acpi_gpio_chip *achip) |
| { |
| struct gpio_chip *chip = achip->chip; |
| struct fwnode_handle *fwnode; |
| |
| device_for_each_child_node(chip->parent, fwnode) { |
| unsigned long lflags; |
| enum gpiod_flags dflags; |
| struct gpio_desc *desc; |
| const char *name; |
| int ret; |
| |
| if (!fwnode_property_present(fwnode, "gpio-hog")) |
| continue; |
| |
| desc = acpi_gpiochip_parse_own_gpio(achip, fwnode, &name, |
| &lflags, &dflags); |
| if (IS_ERR(desc)) |
| continue; |
| |
| ret = gpiod_hog(desc, name, lflags, dflags); |
| if (ret) { |
| dev_err(chip->parent, "Failed to hog GPIO\n"); |
| fwnode_handle_put(fwnode); |
| return; |
| } |
| } |
| } |
| |
| void acpi_gpiochip_add(struct gpio_chip *chip) |
| { |
| struct acpi_gpio_chip *acpi_gpio; |
| struct acpi_device *adev; |
| acpi_status status; |
| |
| if (!chip || !chip->parent) |
| return; |
| |
| adev = ACPI_COMPANION(chip->parent); |
| if (!adev) |
| return; |
| |
| acpi_gpio = kzalloc(sizeof(*acpi_gpio), GFP_KERNEL); |
| if (!acpi_gpio) { |
| dev_err(chip->parent, |
| "Failed to allocate memory for ACPI GPIO chip\n"); |
| return; |
| } |
| |
| acpi_gpio->chip = chip; |
| INIT_LIST_HEAD(&acpi_gpio->events); |
| INIT_LIST_HEAD(&acpi_gpio->deferred_req_irqs_list_entry); |
| |
| status = acpi_attach_data(adev->handle, acpi_gpio_chip_dh, acpi_gpio); |
| if (ACPI_FAILURE(status)) { |
| dev_err(chip->parent, "Failed to attach ACPI GPIO chip\n"); |
| kfree(acpi_gpio); |
| return; |
| } |
| |
| acpi_gpiochip_request_regions(acpi_gpio); |
| acpi_gpiochip_scan_gpios(acpi_gpio); |
| acpi_dev_clear_dependencies(adev); |
| } |
| |
| void acpi_gpiochip_remove(struct gpio_chip *chip) |
| { |
| struct acpi_gpio_chip *acpi_gpio; |
| acpi_handle handle; |
| acpi_status status; |
| |
| if (!chip || !chip->parent) |
| return; |
| |
| handle = ACPI_HANDLE(chip->parent); |
| if (!handle) |
| return; |
| |
| status = acpi_get_data(handle, acpi_gpio_chip_dh, (void **)&acpi_gpio); |
| if (ACPI_FAILURE(status)) { |
| dev_warn(chip->parent, "Failed to retrieve ACPI GPIO chip\n"); |
| return; |
| } |
| |
| acpi_gpiochip_free_regions(acpi_gpio); |
| |
| acpi_detach_data(handle, acpi_gpio_chip_dh); |
| kfree(acpi_gpio); |
| } |
| |
| static int acpi_gpio_package_count(const union acpi_object *obj) |
| { |
| const union acpi_object *element = obj->package.elements; |
| const union acpi_object *end = element + obj->package.count; |
| unsigned int count = 0; |
| |
| while (element < end) { |
| switch (element->type) { |
| case ACPI_TYPE_LOCAL_REFERENCE: |
| element += 3; |
| fallthrough; |
| case ACPI_TYPE_INTEGER: |
| element++; |
| count++; |
| break; |
| |
| default: |
| return -EPROTO; |
| } |
| } |
| |
| return count; |
| } |
| |
| static int acpi_find_gpio_count(struct acpi_resource *ares, void *data) |
| { |
| unsigned int *count = data; |
| |
| if (ares->type == ACPI_RESOURCE_TYPE_GPIO) |
| *count += ares->data.gpio.pin_table_length; |
| |
| return 1; |
| } |
| |
| /** |
| * acpi_gpio_count - count the GPIOs associated with a device / function |
| * @dev: GPIO consumer, can be %NULL for system-global GPIOs |
| * @con_id: function within the GPIO consumer |
| * |
| * Return: |
| * The number of GPIOs associated with a device / function or %-ENOENT, |
| * if no GPIO has been assigned to the requested function. |
| */ |
| int acpi_gpio_count(struct device *dev, const char *con_id) |
| { |
| struct acpi_device *adev = ACPI_COMPANION(dev); |
| const union acpi_object *obj; |
| const struct acpi_gpio_mapping *gm; |
| int count = -ENOENT; |
| int ret; |
| char propname[32]; |
| unsigned int i; |
| |
| /* Try first from _DSD */ |
| for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) { |
| if (con_id) |
| snprintf(propname, sizeof(propname), "%s-%s", |
| con_id, gpio_suffixes[i]); |
| else |
| snprintf(propname, sizeof(propname), "%s", |
| gpio_suffixes[i]); |
| |
| ret = acpi_dev_get_property(adev, propname, ACPI_TYPE_ANY, |
| &obj); |
| if (ret == 0) { |
| if (obj->type == ACPI_TYPE_LOCAL_REFERENCE) |
| count = 1; |
| else if (obj->type == ACPI_TYPE_PACKAGE) |
| count = acpi_gpio_package_count(obj); |
| } else if (adev->driver_gpios) { |
| for (gm = adev->driver_gpios; gm->name; gm++) |
| if (strcmp(propname, gm->name) == 0) { |
| count = gm->size; |
| break; |
| } |
| } |
| if (count > 0) |
| break; |
| } |
| |
| /* Then from plain _CRS GPIOs */ |
| if (count < 0) { |
| struct list_head resource_list; |
| unsigned int crs_count = 0; |
| |
| if (!acpi_can_fallback_to_crs(adev, con_id)) |
| return count; |
| |
| INIT_LIST_HEAD(&resource_list); |
| acpi_dev_get_resources(adev, &resource_list, |
| acpi_find_gpio_count, &crs_count); |
| acpi_dev_free_resource_list(&resource_list); |
| if (crs_count > 0) |
| count = crs_count; |
| } |
| return count ? count : -ENOENT; |
| } |
| |
| /* Run deferred acpi_gpiochip_request_irqs() */ |
| static int __init acpi_gpio_handle_deferred_request_irqs(void) |
| { |
| struct acpi_gpio_chip *acpi_gpio, *tmp; |
| |
| mutex_lock(&acpi_gpio_deferred_req_irqs_lock); |
| list_for_each_entry_safe(acpi_gpio, tmp, |
| &acpi_gpio_deferred_req_irqs_list, |
| deferred_req_irqs_list_entry) |
| acpi_gpiochip_request_irqs(acpi_gpio); |
| |
| acpi_gpio_deferred_req_irqs_done = true; |
| mutex_unlock(&acpi_gpio_deferred_req_irqs_lock); |
| |
| return 0; |
| } |
| /* We must use _sync so that this runs after the first deferred_probe run */ |
| late_initcall_sync(acpi_gpio_handle_deferred_request_irqs); |
| |
| static const struct dmi_system_id gpiolib_acpi_quirks[] __initconst = { |
| { |
| /* |
| * The Minix Neo Z83-4 has a micro-USB-B id-pin handler for |
| * a non existing micro-USB-B connector which puts the HDMI |
| * DDC pins in GPIO mode, breaking HDMI support. |
| */ |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "MINIX"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Z83-4"), |
| }, |
| .driver_data = &(struct acpi_gpiolib_dmi_quirk) { |
| .no_edge_events_on_boot = true, |
| }, |
| }, |
| { |
| /* |
| * The Terra Pad 1061 has a micro-USB-B id-pin handler, which |
| * instead of controlling the actual micro-USB-B turns the 5V |
| * boost for its USB-A connector off. The actual micro-USB-B |
| * connector is wired for charging only. |
| */ |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Wortmann_AG"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "TERRA_PAD_1061"), |
| }, |
| .driver_data = &(struct acpi_gpiolib_dmi_quirk) { |
| .no_edge_events_on_boot = true, |
| }, |
| }, |
| { |
| /* |
| * The Dell Venue 10 Pro 5055, with Bay Trail SoC + TI PMIC uses an |
| * external embedded-controller connected via I2C + an ACPI GPIO |
| * event handler on INT33FFC:02 pin 12, causing spurious wakeups. |
| */ |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Venue 10 Pro 5055"), |
| }, |
| .driver_data = &(struct acpi_gpiolib_dmi_quirk) { |
| .ignore_wake = "INT33FC:02@12", |
| }, |
| }, |
| { |
| /* |
| * HP X2 10 models with Cherry Trail SoC + TI PMIC use an |
| * external embedded-controller connected via I2C + an ACPI GPIO |
| * event handler on INT33FF:01 pin 0, causing spurious wakeups. |
| * When suspending by closing the LID, the power to the USB |
| * keyboard is turned off, causing INT0002 ACPI events to |
| * trigger once the XHCI controller notices the keyboard is |
| * gone. So INT0002 events cause spurious wakeups too. Ignoring |
| * EC wakes breaks wakeup when opening the lid, the user needs |
| * to press the power-button to wakeup the system. The |
| * alternative is suspend simply not working, which is worse. |
| */ |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "HP"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "HP x2 Detachable 10-p0XX"), |
| }, |
| .driver_data = &(struct acpi_gpiolib_dmi_quirk) { |
| .ignore_wake = "INT33FF:01@0,INT0002:00@2", |
| }, |
| }, |
| { |
| /* |
| * HP X2 10 models with Bay Trail SoC + AXP288 PMIC use an |
| * external embedded-controller connected via I2C + an ACPI GPIO |
| * event handler on INT33FC:02 pin 28, causing spurious wakeups. |
| */ |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"), |
| DMI_MATCH(DMI_BOARD_NAME, "815D"), |
| }, |
| .driver_data = &(struct acpi_gpiolib_dmi_quirk) { |
| .ignore_wake = "INT33FC:02@28", |
| }, |
| }, |
| { |
| /* |
| * HP X2 10 models with Cherry Trail SoC + AXP288 PMIC use an |
| * external embedded-controller connected via I2C + an ACPI GPIO |
| * event handler on INT33FF:01 pin 0, causing spurious wakeups. |
| */ |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "HP"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"), |
| DMI_MATCH(DMI_BOARD_NAME, "813E"), |
| }, |
| .driver_data = &(struct acpi_gpiolib_dmi_quirk) { |
| .ignore_wake = "INT33FF:01@0", |
| }, |
| }, |
| { |
| /* |
| * Interrupt storm caused from edge triggered floating pin |
| * Found in BIOS UX325UAZ.300 |
| * https://bugzilla.kernel.org/show_bug.cgi?id=216208 |
| */ |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX325UAZ_UM325UAZ"), |
| }, |
| .driver_data = &(struct acpi_gpiolib_dmi_quirk) { |
| .ignore_interrupt = "AMDI0030:00@18", |
| }, |
| }, |
| { |
| /* |
| * Spurious wakeups from TP_ATTN# pin |
| * Found in BIOS 1.7.8 |
| * https://gitlab.freedesktop.org/drm/amd/-/issues/1722#note_1720627 |
| */ |
| .matches = { |
| DMI_MATCH(DMI_BOARD_NAME, "NL5xNU"), |
| }, |
| .driver_data = &(struct acpi_gpiolib_dmi_quirk) { |
| .ignore_wake = "ELAN0415:00@9", |
| }, |
| }, |
| { |
| /* |
| * Spurious wakeups from TP_ATTN# pin |
| * Found in BIOS 1.7.8 |
| * https://gitlab.freedesktop.org/drm/amd/-/issues/1722#note_1720627 |
| */ |
| .matches = { |
| DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"), |
| }, |
| .driver_data = &(struct acpi_gpiolib_dmi_quirk) { |
| .ignore_wake = "ELAN0415:00@9", |
| }, |
| }, |
| { |
| /* |
| * Spurious wakeups from TP_ATTN# pin |
| * Found in BIOS 1.7.7 |
| */ |
| .matches = { |
| DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"), |
| }, |
| .driver_data = &(struct acpi_gpiolib_dmi_quirk) { |
| .ignore_wake = "SYNA1202:00@16", |
| }, |
| }, |
| { |
| /* |
| * On the Peaq C1010 2-in-1 INT33FC:00 pin 3 is connected to |
| * a "dolby" button. At the ACPI level an _AEI event-handler |
| * is connected which sets an ACPI variable to 1 on both |
| * edges. This variable can be polled + cleared to 0 using |
| * WMI. But since the variable is set on both edges the WMI |
| * interface is pretty useless even when polling. |
| * So instead the x86-android-tablets code instantiates |
| * a gpio-keys platform device for it. |
| * Ignore the _AEI handler for the pin, so that it is not busy. |
| */ |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "PEAQ"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "PEAQ PMM C1010 MD99187"), |
| }, |
| .driver_data = &(struct acpi_gpiolib_dmi_quirk) { |
| .ignore_interrupt = "INT33FC:00@3", |
| }, |
| }, |
| {} /* Terminating entry */ |
| }; |
| |
| static int __init acpi_gpio_setup_params(void) |
| { |
| const struct acpi_gpiolib_dmi_quirk *quirk = NULL; |
| const struct dmi_system_id *id; |
| |
| id = dmi_first_match(gpiolib_acpi_quirks); |
| if (id) |
| quirk = id->driver_data; |
| |
| if (run_edge_events_on_boot < 0) { |
| if (quirk && quirk->no_edge_events_on_boot) |
| run_edge_events_on_boot = 0; |
| else |
| run_edge_events_on_boot = 1; |
| } |
| |
| if (ignore_wake == NULL && quirk && quirk->ignore_wake) |
| ignore_wake = quirk->ignore_wake; |
| |
| if (ignore_interrupt == NULL && quirk && quirk->ignore_interrupt) |
| ignore_interrupt = quirk->ignore_interrupt; |
| |
| return 0; |
| } |
| |
| /* Directly after dmi_setup() which runs as core_initcall() */ |
| postcore_initcall(acpi_gpio_setup_params); |