| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Support for Vishay VCNL3020 proximity sensor on i2c bus. |
| * Based on Vishay VCNL4000 driver code. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/err.h> |
| #include <linux/delay.h> |
| #include <linux/regmap.h> |
| #include <linux/interrupt.h> |
| |
| #include <linux/iio/iio.h> |
| #include <linux/iio/events.h> |
| |
| #define VCNL3020_PROD_ID 0x21 |
| |
| #define VCNL_COMMAND 0x80 /* Command register */ |
| #define VCNL_PROD_REV 0x81 /* Product ID and Revision ID */ |
| #define VCNL_PROXIMITY_RATE 0x82 /* Rate of Proximity Measurement */ |
| #define VCNL_LED_CURRENT 0x83 /* IR LED current for proximity mode */ |
| #define VCNL_PS_RESULT_HI 0x87 /* Proximity result register, MSB */ |
| #define VCNL_PS_RESULT_LO 0x88 /* Proximity result register, LSB */ |
| #define VCNL_PS_ICR 0x89 /* Interrupt Control Register */ |
| #define VCNL_PS_LO_THR_HI 0x8a /* High byte of low threshold value */ |
| #define VCNL_PS_LO_THR_LO 0x8b /* Low byte of low threshold value */ |
| #define VCNL_PS_HI_THR_HI 0x8c /* High byte of high threshold value */ |
| #define VCNL_PS_HI_THR_LO 0x8d /* Low byte of high threshold value */ |
| #define VCNL_ISR 0x8e /* Interrupt Status Register */ |
| #define VCNL_PS_MOD_ADJ 0x8f /* Proximity Modulator Timing Adjustment */ |
| |
| /* Bit masks for COMMAND register */ |
| #define VCNL_PS_RDY BIT(5) /* proximity data ready? */ |
| #define VCNL_PS_OD BIT(3) /* start on-demand proximity |
| * measurement |
| */ |
| |
| /* Enables periodic proximity measurement */ |
| #define VCNL_PS_EN BIT(1) |
| |
| /* Enables state machine and LP oscillator for self timed measurements */ |
| #define VCNL_PS_SELFTIMED_EN BIT(0) |
| |
| /* Bit masks for ICR */ |
| |
| /* Enable interrupts on low or high thresholds */ |
| #define VCNL_ICR_THRES_EN BIT(1) |
| |
| /* Bit masks for ISR */ |
| #define VCNL_INT_TH_HI BIT(0) /* High threshold hit */ |
| #define VCNL_INT_TH_LOW BIT(1) /* Low threshold hit */ |
| |
| #define VCNL_ON_DEMAND_TIMEOUT_US 100000 |
| #define VCNL_POLL_US 20000 |
| |
| static const int vcnl3020_prox_sampling_frequency[][2] = { |
| {1, 950000}, |
| {3, 906250}, |
| {7, 812500}, |
| {16, 625000}, |
| {31, 250000}, |
| {62, 500000}, |
| {125, 0}, |
| {250, 0}, |
| }; |
| |
| /** |
| * struct vcnl3020_data - vcnl3020 specific data. |
| * @regmap: device register map. |
| * @dev: vcnl3020 device. |
| * @rev: revision id. |
| * @lock: lock for protecting access to device hardware registers. |
| * @buf: __be16 buffer. |
| */ |
| struct vcnl3020_data { |
| struct regmap *regmap; |
| struct device *dev; |
| u8 rev; |
| struct mutex lock; |
| __be16 buf; |
| }; |
| |
| /** |
| * struct vcnl3020_property - vcnl3020 property. |
| * @name: property name. |
| * @reg: i2c register offset. |
| * @conversion_func: conversion function. |
| */ |
| struct vcnl3020_property { |
| const char *name; |
| u32 reg; |
| u32 (*conversion_func)(u32 *val); |
| }; |
| |
| static u32 microamp_to_reg(u32 *val) |
| { |
| /* |
| * An example of conversion from uA to reg val: |
| * 200000 uA == 200 mA == 20 |
| */ |
| return *val /= 10000; |
| }; |
| |
| static struct vcnl3020_property vcnl3020_led_current_property = { |
| .name = "vishay,led-current-microamp", |
| .reg = VCNL_LED_CURRENT, |
| .conversion_func = microamp_to_reg, |
| }; |
| |
| static int vcnl3020_get_and_apply_property(struct vcnl3020_data *data, |
| struct vcnl3020_property prop) |
| { |
| int rc; |
| u32 val; |
| |
| rc = device_property_read_u32(data->dev, prop.name, &val); |
| if (rc) |
| return 0; |
| |
| if (prop.conversion_func) |
| prop.conversion_func(&val); |
| |
| rc = regmap_write(data->regmap, prop.reg, val); |
| if (rc) { |
| dev_err(data->dev, "Error (%d) setting property (%s)\n", |
| rc, prop.name); |
| } |
| |
| return rc; |
| } |
| |
| static int vcnl3020_init(struct vcnl3020_data *data) |
| { |
| int rc; |
| unsigned int reg; |
| |
| rc = regmap_read(data->regmap, VCNL_PROD_REV, ®); |
| if (rc) { |
| dev_err(data->dev, |
| "Error (%d) reading product revision\n", rc); |
| return rc; |
| } |
| |
| if (reg != VCNL3020_PROD_ID) { |
| dev_err(data->dev, |
| "Product id (%x) did not match vcnl3020 (%x)\n", reg, |
| VCNL3020_PROD_ID); |
| return -ENODEV; |
| } |
| |
| data->rev = reg; |
| mutex_init(&data->lock); |
| |
| return vcnl3020_get_and_apply_property(data, |
| vcnl3020_led_current_property); |
| }; |
| |
| static bool vcnl3020_is_in_periodic_mode(struct vcnl3020_data *data) |
| { |
| int rc; |
| unsigned int cmd; |
| |
| rc = regmap_read(data->regmap, VCNL_COMMAND, &cmd); |
| if (rc) { |
| dev_err(data->dev, |
| "Error (%d) reading command register\n", rc); |
| return false; |
| } |
| |
| return !!(cmd & VCNL_PS_SELFTIMED_EN); |
| } |
| |
| static int vcnl3020_measure_proximity(struct vcnl3020_data *data, int *val) |
| { |
| int rc; |
| unsigned int reg; |
| |
| mutex_lock(&data->lock); |
| |
| /* Protect against event capture. */ |
| if (vcnl3020_is_in_periodic_mode(data)) { |
| rc = -EBUSY; |
| goto err_unlock; |
| } |
| |
| rc = regmap_write(data->regmap, VCNL_COMMAND, VCNL_PS_OD); |
| if (rc) |
| goto err_unlock; |
| |
| /* wait for data to become ready */ |
| rc = regmap_read_poll_timeout(data->regmap, VCNL_COMMAND, reg, |
| reg & VCNL_PS_RDY, VCNL_POLL_US, |
| VCNL_ON_DEMAND_TIMEOUT_US); |
| if (rc) { |
| dev_err(data->dev, |
| "Error (%d) reading vcnl3020 command register\n", rc); |
| goto err_unlock; |
| } |
| |
| /* high & low result bytes read */ |
| rc = regmap_bulk_read(data->regmap, VCNL_PS_RESULT_HI, &data->buf, |
| sizeof(data->buf)); |
| if (rc) |
| goto err_unlock; |
| |
| *val = be16_to_cpu(data->buf); |
| |
| err_unlock: |
| mutex_unlock(&data->lock); |
| |
| return rc; |
| } |
| |
| static int vcnl3020_read_proxy_samp_freq(struct vcnl3020_data *data, int *val, |
| int *val2) |
| { |
| int rc; |
| unsigned int prox_rate; |
| |
| rc = regmap_read(data->regmap, VCNL_PROXIMITY_RATE, &prox_rate); |
| if (rc) |
| return rc; |
| |
| if (prox_rate >= ARRAY_SIZE(vcnl3020_prox_sampling_frequency)) |
| return -EINVAL; |
| |
| *val = vcnl3020_prox_sampling_frequency[prox_rate][0]; |
| *val2 = vcnl3020_prox_sampling_frequency[prox_rate][1]; |
| |
| return 0; |
| } |
| |
| static int vcnl3020_write_proxy_samp_freq(struct vcnl3020_data *data, int val, |
| int val2) |
| { |
| unsigned int i; |
| int index = -1; |
| int rc; |
| |
| mutex_lock(&data->lock); |
| |
| /* Protect against event capture. */ |
| if (vcnl3020_is_in_periodic_mode(data)) { |
| rc = -EBUSY; |
| goto err_unlock; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(vcnl3020_prox_sampling_frequency); i++) { |
| if (val == vcnl3020_prox_sampling_frequency[i][0] && |
| val2 == vcnl3020_prox_sampling_frequency[i][1]) { |
| index = i; |
| break; |
| } |
| } |
| |
| if (index < 0) { |
| rc = -EINVAL; |
| goto err_unlock; |
| } |
| |
| rc = regmap_write(data->regmap, VCNL_PROXIMITY_RATE, index); |
| if (rc) |
| dev_err(data->dev, |
| "Error (%d) writing proximity rate register\n", rc); |
| |
| err_unlock: |
| mutex_unlock(&data->lock); |
| |
| return rc; |
| } |
| |
| static bool vcnl3020_is_thr_enabled(struct vcnl3020_data *data) |
| { |
| int rc; |
| unsigned int icr; |
| |
| rc = regmap_read(data->regmap, VCNL_PS_ICR, &icr); |
| if (rc) { |
| dev_err(data->dev, |
| "Error (%d) reading ICR register\n", rc); |
| return false; |
| } |
| |
| return !!(icr & VCNL_ICR_THRES_EN); |
| } |
| |
| static int vcnl3020_read_event(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| enum iio_event_info info, |
| int *val, int *val2) |
| { |
| int rc; |
| struct vcnl3020_data *data = iio_priv(indio_dev); |
| |
| switch (info) { |
| case IIO_EV_INFO_VALUE: |
| switch (dir) { |
| case IIO_EV_DIR_RISING: |
| rc = regmap_bulk_read(data->regmap, VCNL_PS_HI_THR_HI, |
| &data->buf, sizeof(data->buf)); |
| if (rc < 0) |
| return rc; |
| *val = be16_to_cpu(data->buf); |
| return IIO_VAL_INT; |
| case IIO_EV_DIR_FALLING: |
| rc = regmap_bulk_read(data->regmap, VCNL_PS_LO_THR_HI, |
| &data->buf, sizeof(data->buf)); |
| if (rc < 0) |
| return rc; |
| *val = be16_to_cpu(data->buf); |
| return IIO_VAL_INT; |
| default: |
| return -EINVAL; |
| } |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int vcnl3020_write_event(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| enum iio_event_info info, |
| int val, int val2) |
| { |
| int rc; |
| struct vcnl3020_data *data = iio_priv(indio_dev); |
| |
| mutex_lock(&data->lock); |
| |
| switch (info) { |
| case IIO_EV_INFO_VALUE: |
| switch (dir) { |
| case IIO_EV_DIR_RISING: |
| /* 16 bit word/ low * high */ |
| data->buf = cpu_to_be16(val); |
| rc = regmap_bulk_write(data->regmap, VCNL_PS_HI_THR_HI, |
| &data->buf, sizeof(data->buf)); |
| if (rc < 0) |
| goto err_unlock; |
| rc = IIO_VAL_INT; |
| goto err_unlock; |
| case IIO_EV_DIR_FALLING: |
| data->buf = cpu_to_be16(val); |
| rc = regmap_bulk_write(data->regmap, VCNL_PS_LO_THR_HI, |
| &data->buf, sizeof(data->buf)); |
| if (rc < 0) |
| goto err_unlock; |
| rc = IIO_VAL_INT; |
| goto err_unlock; |
| default: |
| rc = -EINVAL; |
| goto err_unlock; |
| } |
| default: |
| rc = -EINVAL; |
| goto err_unlock; |
| } |
| err_unlock: |
| mutex_unlock(&data->lock); |
| |
| return rc; |
| } |
| |
| static int vcnl3020_enable_periodic(struct iio_dev *indio_dev, |
| struct vcnl3020_data *data) |
| { |
| int rc; |
| int cmd; |
| |
| mutex_lock(&data->lock); |
| |
| /* Enable periodic measurement of proximity data. */ |
| cmd = VCNL_PS_EN | VCNL_PS_SELFTIMED_EN; |
| |
| rc = regmap_write(data->regmap, VCNL_COMMAND, cmd); |
| if (rc) { |
| dev_err(data->dev, |
| "Error (%d) writing command register\n", rc); |
| goto err_unlock; |
| } |
| |
| /* |
| * Enable interrupts on threshold, for proximity data by |
| * default. |
| */ |
| rc = regmap_write(data->regmap, VCNL_PS_ICR, VCNL_ICR_THRES_EN); |
| if (rc) |
| dev_err(data->dev, |
| "Error (%d) reading ICR register\n", rc); |
| |
| err_unlock: |
| mutex_unlock(&data->lock); |
| |
| return rc; |
| } |
| |
| static int vcnl3020_disable_periodic(struct iio_dev *indio_dev, |
| struct vcnl3020_data *data) |
| { |
| int rc; |
| |
| mutex_lock(&data->lock); |
| |
| rc = regmap_write(data->regmap, VCNL_COMMAND, 0); |
| if (rc) { |
| dev_err(data->dev, |
| "Error (%d) writing command register\n", rc); |
| goto err_unlock; |
| } |
| |
| rc = regmap_write(data->regmap, VCNL_PS_ICR, 0); |
| if (rc) { |
| dev_err(data->dev, |
| "Error (%d) writing ICR register\n", rc); |
| goto err_unlock; |
| } |
| |
| /* Clear interrupt flag bit */ |
| rc = regmap_write(data->regmap, VCNL_ISR, 0); |
| if (rc) |
| dev_err(data->dev, |
| "Error (%d) writing ISR register\n", rc); |
| |
| err_unlock: |
| mutex_unlock(&data->lock); |
| |
| return rc; |
| } |
| |
| static int vcnl3020_config_threshold(struct iio_dev *indio_dev, bool state) |
| { |
| struct vcnl3020_data *data = iio_priv(indio_dev); |
| |
| if (state) { |
| return vcnl3020_enable_periodic(indio_dev, data); |
| } else { |
| if (!vcnl3020_is_thr_enabled(data)) |
| return 0; |
| return vcnl3020_disable_periodic(indio_dev, data); |
| } |
| } |
| |
| static int vcnl3020_write_event_config(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| int state) |
| { |
| switch (chan->type) { |
| case IIO_PROXIMITY: |
| return vcnl3020_config_threshold(indio_dev, state); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int vcnl3020_read_event_config(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir) |
| { |
| struct vcnl3020_data *data = iio_priv(indio_dev); |
| |
| switch (chan->type) { |
| case IIO_PROXIMITY: |
| return vcnl3020_is_thr_enabled(data); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static const struct iio_event_spec vcnl3020_event_spec[] = { |
| { |
| .type = IIO_EV_TYPE_THRESH, |
| .dir = IIO_EV_DIR_RISING, |
| .mask_separate = BIT(IIO_EV_INFO_VALUE), |
| }, { |
| .type = IIO_EV_TYPE_THRESH, |
| .dir = IIO_EV_DIR_FALLING, |
| .mask_separate = BIT(IIO_EV_INFO_VALUE), |
| }, { |
| .type = IIO_EV_TYPE_THRESH, |
| .dir = IIO_EV_DIR_EITHER, |
| .mask_separate = BIT(IIO_EV_INFO_ENABLE), |
| }, |
| }; |
| |
| static const struct iio_chan_spec vcnl3020_channels[] = { |
| { |
| .type = IIO_PROXIMITY, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_SAMP_FREQ), |
| .info_mask_separate_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), |
| .event_spec = vcnl3020_event_spec, |
| .num_event_specs = ARRAY_SIZE(vcnl3020_event_spec), |
| }, |
| }; |
| |
| static int vcnl3020_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int *val, |
| int *val2, long mask) |
| { |
| int rc; |
| struct vcnl3020_data *data = iio_priv(indio_dev); |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| rc = vcnl3020_measure_proximity(data, val); |
| if (rc) |
| return rc; |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| rc = vcnl3020_read_proxy_samp_freq(data, val, val2); |
| if (rc < 0) |
| return rc; |
| return IIO_VAL_INT_PLUS_MICRO; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int vcnl3020_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int val, int val2, long mask) |
| { |
| struct vcnl3020_data *data = iio_priv(indio_dev); |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| return vcnl3020_write_proxy_samp_freq(data, val, val2); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int vcnl3020_read_avail(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| const int **vals, int *type, int *length, |
| long mask) |
| { |
| switch (mask) { |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| *vals = (int *)vcnl3020_prox_sampling_frequency; |
| *type = IIO_VAL_INT_PLUS_MICRO; |
| *length = 2 * ARRAY_SIZE(vcnl3020_prox_sampling_frequency); |
| return IIO_AVAIL_LIST; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static const struct iio_info vcnl3020_info = { |
| .read_raw = vcnl3020_read_raw, |
| .write_raw = vcnl3020_write_raw, |
| .read_avail = vcnl3020_read_avail, |
| .read_event_value = vcnl3020_read_event, |
| .write_event_value = vcnl3020_write_event, |
| .read_event_config = vcnl3020_read_event_config, |
| .write_event_config = vcnl3020_write_event_config, |
| }; |
| |
| static const struct regmap_config vcnl3020_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = VCNL_PS_MOD_ADJ, |
| }; |
| |
| static irqreturn_t vcnl3020_handle_irq_thread(int irq, void *p) |
| { |
| struct iio_dev *indio_dev = p; |
| struct vcnl3020_data *data = iio_priv(indio_dev); |
| unsigned int isr; |
| int rc; |
| |
| rc = regmap_read(data->regmap, VCNL_ISR, &isr); |
| if (rc) { |
| dev_err(data->dev, "Error (%d) reading reg (0x%x)\n", |
| rc, VCNL_ISR); |
| return IRQ_HANDLED; |
| } |
| |
| if (!(isr & VCNL_ICR_THRES_EN)) |
| return IRQ_NONE; |
| |
| iio_push_event(indio_dev, |
| IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 1, |
| IIO_EV_TYPE_THRESH, |
| IIO_EV_DIR_RISING), |
| iio_get_time_ns(indio_dev)); |
| |
| rc = regmap_write(data->regmap, VCNL_ISR, isr & VCNL_ICR_THRES_EN); |
| if (rc) |
| dev_err(data->dev, "Error (%d) writing in reg (0x%x)\n", |
| rc, VCNL_ISR); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int vcnl3020_probe(struct i2c_client *client) |
| { |
| struct vcnl3020_data *data; |
| struct iio_dev *indio_dev; |
| struct regmap *regmap; |
| int rc; |
| |
| regmap = devm_regmap_init_i2c(client, &vcnl3020_regmap_config); |
| if (IS_ERR(regmap)) { |
| dev_err(&client->dev, "regmap_init failed\n"); |
| return PTR_ERR(regmap); |
| } |
| |
| indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| data = iio_priv(indio_dev); |
| i2c_set_clientdata(client, indio_dev); |
| data->regmap = regmap; |
| data->dev = &client->dev; |
| |
| rc = vcnl3020_init(data); |
| if (rc) |
| return rc; |
| |
| indio_dev->info = &vcnl3020_info; |
| indio_dev->channels = vcnl3020_channels; |
| indio_dev->num_channels = ARRAY_SIZE(vcnl3020_channels); |
| indio_dev->name = "vcnl3020"; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| |
| if (client->irq) { |
| rc = devm_request_threaded_irq(&client->dev, client->irq, |
| NULL, vcnl3020_handle_irq_thread, |
| IRQF_ONESHOT, indio_dev->name, |
| indio_dev); |
| if (rc) { |
| dev_err(&client->dev, |
| "Error (%d) irq request failed (%u)\n", rc, |
| client->irq); |
| return rc; |
| } |
| } |
| |
| return devm_iio_device_register(&client->dev, indio_dev); |
| } |
| |
| static const struct of_device_id vcnl3020_of_match[] = { |
| { |
| .compatible = "vishay,vcnl3020", |
| }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, vcnl3020_of_match); |
| |
| static struct i2c_driver vcnl3020_driver = { |
| .driver = { |
| .name = "vcnl3020", |
| .of_match_table = vcnl3020_of_match, |
| }, |
| .probe = vcnl3020_probe, |
| }; |
| module_i2c_driver(vcnl3020_driver); |
| |
| MODULE_AUTHOR("Ivan Mikhaylov <i.mikhaylov@yadro.com>"); |
| MODULE_DESCRIPTION("Vishay VCNL3020 proximity sensor driver"); |
| MODULE_LICENSE("GPL"); |