| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Rockchip RK806 Core (SPI) driver |
| * |
| * Copyright (c) 2021 Rockchip Electronics Co., Ltd. |
| * Copyright (c) 2023 Collabora Ltd. |
| * |
| * Author: Xu Shengfei <xsf@rock-chips.com> |
| * Author: Sebastian Reichel <sebastian.reichel@collabora.com> |
| */ |
| |
| #include <linux/interrupt.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/rk808.h> |
| #include <linux/module.h> |
| #include <linux/regmap.h> |
| #include <linux/spi/spi.h> |
| |
| #define RK806_ADDR_SIZE 2 |
| #define RK806_CMD_WITH_SIZE(CMD, VALUE_BYTES) \ |
| (RK806_CMD_##CMD | RK806_CMD_CRC_DIS | (VALUE_BYTES - 1)) |
| |
| static const struct regmap_range rk806_volatile_ranges[] = { |
| regmap_reg_range(RK806_POWER_EN0, RK806_POWER_EN5), |
| regmap_reg_range(RK806_DVS_START_CTRL, RK806_INT_MSK1), |
| }; |
| |
| static const struct regmap_access_table rk806_volatile_table = { |
| .yes_ranges = rk806_volatile_ranges, |
| .n_yes_ranges = ARRAY_SIZE(rk806_volatile_ranges), |
| }; |
| |
| static const struct regmap_config rk806_regmap_config_spi = { |
| .reg_bits = 16, |
| .val_bits = 8, |
| .max_register = RK806_BUCK_RSERVE_REG5, |
| .cache_type = REGCACHE_RBTREE, |
| .volatile_table = &rk806_volatile_table, |
| }; |
| |
| static int rk806_spi_bus_write(void *context, const void *vdata, size_t count) |
| { |
| struct device *dev = context; |
| struct spi_device *spi = to_spi_device(dev); |
| struct spi_transfer xfer[2] = { 0 }; |
| /* data and thus count includes the register address */ |
| size_t val_size = count - RK806_ADDR_SIZE; |
| char cmd; |
| |
| if (val_size < 1 || val_size > (RK806_CMD_LEN_MSK + 1)) |
| return -EINVAL; |
| |
| cmd = RK806_CMD_WITH_SIZE(WRITE, val_size); |
| |
| xfer[0].tx_buf = &cmd; |
| xfer[0].len = sizeof(cmd); |
| xfer[1].tx_buf = vdata; |
| xfer[1].len = count; |
| |
| return spi_sync_transfer(spi, xfer, ARRAY_SIZE(xfer)); |
| } |
| |
| static int rk806_spi_bus_read(void *context, const void *vreg, size_t reg_size, |
| void *val, size_t val_size) |
| { |
| struct device *dev = context; |
| struct spi_device *spi = to_spi_device(dev); |
| char txbuf[3] = { 0 }; |
| |
| if (reg_size != RK806_ADDR_SIZE || |
| val_size < 1 || val_size > (RK806_CMD_LEN_MSK + 1)) |
| return -EINVAL; |
| |
| /* TX buffer contains command byte followed by two address bytes */ |
| txbuf[0] = RK806_CMD_WITH_SIZE(READ, val_size); |
| memcpy(txbuf+1, vreg, reg_size); |
| |
| return spi_write_then_read(spi, txbuf, sizeof(txbuf), val, val_size); |
| } |
| |
| static const struct regmap_bus rk806_regmap_bus_spi = { |
| .write = rk806_spi_bus_write, |
| .read = rk806_spi_bus_read, |
| .reg_format_endian_default = REGMAP_ENDIAN_LITTLE, |
| }; |
| |
| static int rk8xx_spi_probe(struct spi_device *spi) |
| { |
| struct regmap *regmap; |
| |
| regmap = devm_regmap_init(&spi->dev, &rk806_regmap_bus_spi, |
| &spi->dev, &rk806_regmap_config_spi); |
| if (IS_ERR(regmap)) |
| return dev_err_probe(&spi->dev, PTR_ERR(regmap), |
| "Failed to init regmap\n"); |
| |
| return rk8xx_probe(&spi->dev, RK806_ID, spi->irq, regmap); |
| } |
| |
| static const struct of_device_id rk8xx_spi_of_match[] = { |
| { .compatible = "rockchip,rk806", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, rk8xx_spi_of_match); |
| |
| static const struct spi_device_id rk8xx_spi_id_table[] = { |
| { "rk806", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(spi, rk8xx_spi_id_table); |
| |
| static struct spi_driver rk8xx_spi_driver = { |
| .driver = { |
| .name = "rk8xx-spi", |
| .of_match_table = rk8xx_spi_of_match, |
| }, |
| .probe = rk8xx_spi_probe, |
| .id_table = rk8xx_spi_id_table, |
| }; |
| module_spi_driver(rk8xx_spi_driver); |
| |
| MODULE_AUTHOR("Xu Shengfei <xsf@rock-chips.com>"); |
| MODULE_DESCRIPTION("RK8xx SPI PMIC driver"); |
| MODULE_LICENSE("GPL"); |