| * Hisilicon specific extensions to the Synopsys Designware Mobile |
| Storage Host Controller |
| |
| Read synopsys-dw-mshc.txt for more details |
| |
| The Synopsys designware mobile storage host controller is used to interface |
| a SoC with storage medium such as eMMC or SD/MMC cards. This file documents |
| differences between the core Synopsys dw mshc controller properties described |
| by synopsys-dw-mshc.txt and the properties used by the Hisilicon specific |
| extensions to the Synopsys Designware Mobile Storage Host Controller. |
| |
| Required Properties: |
| |
| * compatible: should be one of the following. |
| - "hisilicon,hi3660-dw-mshc": for controllers with hi3660 specific extensions. |
| - "hisilicon,hi3670-dw-mshc", "hisilicon,hi3660-dw-mshc": for controllers |
| with hi3670 specific extensions. |
| - "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extensions. |
| - "hisilicon,hi6220-dw-mshc": for controllers with hi6220 specific extensions. |
| |
| Optional Properties: |
| - hisilicon,peripheral-syscon: phandle of syscon used to control peripheral. |
| |
| Example: |
| |
| /* for Hi3620 */ |
| |
| /* SoC portion */ |
| dwmmc_0: dwmmc0@fcd03000 { |
| compatible = "hisilicon,hi4511-dw-mshc"; |
| reg = <0xfcd03000 0x1000>; |
| interrupts = <0 16 4>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&mmc_clock HI3620_SD_CIUCLK>, <&clock HI3620_DDRC_PER_CLK>; |
| clock-names = "ciu", "biu"; |
| }; |
| |
| /* Board portion */ |
| dwmmc0@fcd03000 { |
| vmmc-supply = <&ldo12>; |
| fifo-depth = <0x100>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&sd_pmx_pins &sd_cfg_func1 &sd_cfg_func2>; |
| bus-width = <4>; |
| disable-wp; |
| cd-gpios = <&gpio10 3 0>; |
| cap-mmc-highspeed; |
| cap-sd-highspeed; |
| }; |
| |
| /* for Hi6220 */ |
| |
| dwmmc_1: dwmmc1@f723e000 { |
| compatible = "hisilicon,hi6220-dw-mshc"; |
| bus-width = <0x4>; |
| disable-wp; |
| cap-sd-highspeed; |
| sd-uhs-sdr12; |
| sd-uhs-sdr25; |
| card-detect-delay = <200>; |
| hisilicon,peripheral-syscon = <&ao_ctrl>; |
| reg = <0x0 0xf723e000 0x0 0x1000>; |
| interrupts = <0x0 0x49 0x4>; |
| clocks = <&clock_sys HI6220_MMC1_CIUCLK>, <&clock_sys HI6220_MMC1_CLK>; |
| clock-names = "ciu", "biu"; |
| cd-gpios = <&gpio1 0 1>; |
| pinctrl-names = "default", "idle"; |
| pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>; |
| pinctrl-1 = <&sd_pmx_idle &sd_clk_cfg_idle &sd_cfg_idle>; |
| vqmmc-supply = <&ldo7>; |
| vmmc-supply = <&ldo10>; |
| }; |
