| Linear Technology LTC3676 8-output regulators |
| |
| Required properties: |
| - compatible: "lltc,ltc3676" |
| - reg: I2C slave address |
| |
| Required child node: |
| - regulators: Contains eight regulator child nodes sw1, sw2, sw3, sw4, |
| ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as |
| documented in Documentation/devicetree/bindings/regulator/regulator.txt. |
| |
| Each regulator is defined using the standard binding for regulators. The |
| nodes for sw1, sw2, sw3, sw4, ldo1, ldo2 and ldo4 additionally need to specify |
| the resistor values of their external feedback voltage dividers: |
| |
| Required properties (not on ldo3): |
| - lltc,fb-voltage-divider: An array of two integers containing the resistor |
| values R1 and R2 of the feedback voltage divider in ohms. |
| |
| Regulators sw1, sw2, sw3, sw4 can regulate the feedback reference from: |
| 412.5mV to 800mV in 12.5 mV steps. The output voltage thus ranges between |
| 0.4125 * (1 + R1/R2) V and 0.8 * (1 + R1/R2) V. |
| |
| Regulators ldo1, ldo2, and ldo4 have a fixed 0.725 V reference and thus output |
| 0.725 * (1 + R1/R2) V. The ldo3 regulator is fixed to 1.8 V. The ldo1 standby |
| regulator can not be disabled and thus should have the regulator-always-on |
| property set. |
| |
| Example: |
| |
| ltc3676: pmic@3c { |
| compatible = "lltc,ltc3676"; |
| reg = <0x3c>; |
| |
| regulators { |
| sw1_reg: sw1 { |
| regulator-min-microvolt = <674400>; |
| regulator-max-microvolt = <1308000>; |
| lltc,fb-voltage-divider = <127000 200000>; |
| regulator-ramp-delay = <7000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw2_reg: sw2 { |
| regulator-min-microvolt = <1033310>; |
| regulator-max-microvolt = <200400>; |
| lltc,fb-voltage-divider = <301000 200000>; |
| regulator-ramp-delay = <7000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw3_reg: sw3 { |
| regulator-min-microvolt = <674400>; |
| regulator-max-microvolt = <130800>; |
| lltc,fb-voltage-divider = <127000 200000>; |
| regulator-ramp-delay = <7000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw4_reg: sw4 { |
| regulator-min-microvolt = <868310>; |
| regulator-max-microvolt = <168400>; |
| lltc,fb-voltage-divider = <221000 200000>; |
| regulator-ramp-delay = <7000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldo2_reg: ldo2 { |
| regulator-min-microvolt = <2490375>; |
| regulator-max-microvolt = <2490375>; |
| lltc,fb-voltage-divider = <487000 200000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldo3_reg: ldo3 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| }; |
| |
| ldo4_reg: ldo4 { |
| regulator-min-microvolt = <3023250>; |
| regulator-max-microvolt = <3023250>; |
| lltc,fb-voltage-divider = <634000 200000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| }; |
| }; |