| TPS51632 Voltage regulators |
| |
| Required properties: |
| - compatible: Must be "ti,tps51632" |
| - reg: I2C slave address |
| |
| Optional properties: |
| - ti,enable-pwm-dvfs: Enable the DVFS voltage control through the PWM interface. |
| - ti,dvfs-step-20mV: The 20mV step voltage when PWM DVFS enabled. Missing this |
| will set 10mV step voltage in PWM DVFS mode. In normal mode, the voltage |
| step is 10mV as per datasheet. |
| |
| Any property defined as part of the core regulator binding, defined in |
| regulator.txt, can also be used. |
| |
| Example: |
| |
| tps51632 { |
| compatible = "ti,tps51632"; |
| reg = <0x43>; |
| regulator-name = "tps51632-vout"; |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1500000>; |
| regulator-boot-on; |
| ti,enable-pwm-dvfs; |
| ti,dvfs-step-20mV; |
| }; |
