arch/powerpc/boot/dts/fsl/p3041ds.dts - linux - Git at Google

 /*
  * P3041DS Device Tree Source
  *
  * Copyright 2010 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *     * Redistributions of source code must retain the above copyright
  *       notice, this list of conditions and the following disclaimer.
  *     * Redistributions in binary form must reproduce the above copyright
  *       notice, this list of conditions and the following disclaimer in the
  *       documentation and/or other materials provided with the distribution.
  *     * Neither the name of Freescale Semiconductor nor the
  *       names of its contributors may be used to endorse or promote products
  *       derived from this software without specific prior written permission.
  *
  *
  * ALTERNATIVELY, this software may be distributed under the terms of the
  * GNU General Public License ("GPL") as published by the Free Software
  * Foundation, either version 2 of that License or (at your option) any
  * later version.
  *
  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */

 /include/ "p3041si-pre.dtsi"

 / {
 	model = "fsl,P3041DS";
 	compatible = "fsl,P3041DS";
 	#address-cells = <2>;
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;

 	aliases {
 		phy_rgmii_0 = &phy_rgmii_0;
 		phy_rgmii_1 = &phy_rgmii_1;
 		phy_sgmii_1c = &phy_sgmii_1c;
 		phy_sgmii_1d = &phy_sgmii_1d;
 		phy_sgmii_1e = &phy_sgmii_1e;
 		phy_sgmii_1f = &phy_sgmii_1f;
 		phy_xgmii_1 = &phy_xgmii_1;
 		phy_xgmii_2 = &phy_xgmii_2;
 		emi1_rgmii = &hydra_mdio_rgmii;
 		emi1_sgmii = &hydra_mdio_sgmii;
 		emi2_xgmii = &hydra_mdio_xgmii;
 	};

 	memory {
 		device_type = "memory";
 	};

 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;

 		bman_fbpr: bman-fbpr {
 			size = <0 0x1000000>;
 			alignment = <0 0x1000000>;
 		};
 		qman_fqd: qman-fqd {
 			size = <0 0x400000>;
 			alignment = <0 0x400000>;
 		};
 		qman_pfdr: qman-pfdr {
 			size = <0 0x2000000>;
 			alignment = <0 0x2000000>;
 		};
 	};

 	dcsr: dcsr@f00000000 {
 		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
 	};

 	bportals: bman-portals@ff4000000 {
 		ranges = <0x0 0xf 0xf4000000 0x200000>;
 	};

 	qportals: qman-portals@ff4200000 {
 		ranges = <0x0 0xf 0xf4200000 0x200000>;
 	};

 	soc: soc@ffe000000 {
 		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 		reg = <0xf 0xfe000000 0 0x00001000>;
 		spi@110000 {
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "spansion,s25sl12801", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <35000000>; /* input clock */
 				partition@u-boot {
 					label = "u-boot";
 					reg = <0x00000000 0x00100000>;
 					read-only;
 				};
 				partition@kernel {
 					label = "kernel";
 					reg = <0x00100000 0x00500000>;
 					read-only;
 				};
 				partition@dtb {
 					label = "dtb";
 					reg = <0x00600000 0x00100000>;
 					read-only;
 				};
 				partition@fs {
 					label = "file system";
 					reg = <0x00700000 0x00900000>;
 				};
 			};
 		};

 		i2c@118100 {
 			eeprom@51 {
 				compatible = "atmel,24c256";
 				reg = <0x51>;
 			};
 			eeprom@52 {
 				compatible = "atmel,24c256";
 				reg = <0x52>;
 			};
 		};

 		i2c@119100 {
 			rtc@68 {
 				compatible = "dallas,ds3232";
 				reg = <0x68>;
 				interrupts = <0x1 0x1 0 0>;
 			};
 			ina220@40 {
 				compatible = "ti,ina220";
 				reg = <0x40>;
 				shunt-resistor = <1000>;
 			};
 			ina220@41 {
 				compatible = "ti,ina220";
 				reg = <0x41>;
 				shunt-resistor = <1000>;
 			};
 			ina220@44 {
 				compatible = "ti,ina220";
 				reg = <0x44>;
 				shunt-resistor = <1000>;
 			};
 			ina220@45 {
 				compatible = "ti,ina220";
 				reg = <0x45>;
 				shunt-resistor = <1000>;
 			};
 			adt7461@4c {
 				compatible = "adi,adt7461";
 				reg = <0x4c>;
 			};
 		};

 		fman@400000 {
 			ethernet@e0000 {
 				phy-handle = <&phy_sgmii_1c>;
 				phy-connection-type = "sgmii";
 			};

 			ethernet@e2000 {
 				phy-handle = <&phy_sgmii_1d>;
 				phy-connection-type = "sgmii";
 			};

 			ethernet@e4000 {
 				phy-handle = <&phy_sgmii_1e>;
 				phy-connection-type = "sgmii";
 			};

 			ethernet@e6000 {
 				phy-handle = <&phy_sgmii_1f>;
 				phy-connection-type = "sgmii";
 			};

 			ethernet@e8000 {
 				phy-handle = <&phy_rgmii_1>;
 				phy-connection-type = "rgmii";
 			};

 			ethernet@f0000 {
 				phy-handle = <&phy_xgmii_1>;
 				phy-connection-type = "xgmii";
 			};

 			hydra_mdio_xgmii: mdio@f1000 {
 				status = "disabled";

 				phy_xgmii_1: ethernet-phy@4 {
 					compatible = "ethernet-phy-ieee802.3-c45";
 					reg = <0x4>;
 				};

 				phy_xgmii_2: ethernet-phy@0 {
 					compatible = "ethernet-phy-ieee802.3-c45";
 					reg = <0x0>;
 				};
 			};
 		};
 	};

 	rio: rapidio@ffe0c0000 {
 		reg = <0xf 0xfe0c0000 0 0x11000>;

 		port1 {
 			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
 		};
 		port2 {
 			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
 		};
 	};

 	lbc: localbus@ffe124000 {
 		reg = <0xf 0xfe124000 0 0x1000>;
 		ranges = <0 0 0xf 0xe8000000 0x08000000
 			  2 0 0xf 0xffa00000 0x00040000
 			  3 0 0xf 0xffdf0000 0x00008000>;

 		flash@0,0 {
 			compatible = "cfi-flash";
 			reg = <0 0 0x08000000>;
 			bank-width = <2>;
 			device-width = <2>;
 		};

 		nand@2,0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "fsl,elbc-fcm-nand";
 			reg = <0x2 0x0 0x40000>;

 			partition@0 {
 				label = "NAND U-Boot Image";
 				reg = <0x0 0x02000000>;
 				read-only;
 			};

 			partition@2000000 {
 				label = "NAND Root File System";
 				reg = <0x02000000 0x10000000>;
 			};

 			partition@12000000 {
 				label = "NAND Compressed RFS Image";
 				reg = <0x12000000 0x08000000>;
 			};

 			partition@1a000000 {
 				label = "NAND Linux Kernel Image";
 				reg = <0x1a000000 0x04000000>;
 			};

 			partition@1e000000 {
 				label = "NAND DTB Image";
 				reg = <0x1e000000 0x01000000>;
 			};

 			partition@1f000000 {
 				label = "NAND Writable User area";
 				reg = <0x1f000000 0x21000000>;
 			};
 		};

 		board-control@3,0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis";
 			reg = <3 0 0x30>;
 			ranges = <0 3 0 0x30>;

 			mdio-mux-emi1 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "mdio-mux-mmioreg", "mdio-mux";
 				mdio-parent-bus = <&mdio0>;
 				reg = <9 1>;
 				mux-mask = <0x78>;

 				hydra_mdio_rgmii: rgmii-mdio@8 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <8>;
 					status = "disabled";

 					phy_rgmii_0: ethernet-phy@0 {
 						reg = <0x0>;
 					};

 					phy_rgmii_1: ethernet-phy@1 {
 						reg = <0x1>;
 					};
 				};

 				hydra_mdio_sgmii: sgmii-mdio@28 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <0x28>;
 					status = "disabled";

 					phy_sgmii_1c: ethernet-phy@1c {
 						reg = <0x1c>;
 					};

 					phy_sgmii_1d: ethernet-phy@1d {
 						reg = <0x1d>;
 					};

 					phy_sgmii_1e: ethernet-phy@1e {
 						reg = <0x1e>;
 					};

 					phy_sgmii_1f: ethernet-phy@1f {
 						reg = <0x1f>;
 					};
 				};
 			};
 		};
 	};

 	pci0: pcie@ffe200000 {
 		reg = <0xf 0xfe200000 0 0x1000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
 				  0 0x20000000

 				  0x01000000 0 0x00000000
 				  0x01000000 0 0x00000000
 				  0 0x00010000>;
 		};
 	};

 	pci1: pcie@ffe201000 {
 		reg = <0xf 0xfe201000 0 0x1000>;
 		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
 			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
 				  0 0x20000000

 				  0x01000000 0 0x00000000
 				  0x01000000 0 0x00000000
 				  0 0x00010000>;
 		};
 	};

 	pci2: pcie@ffe202000 {
 		reg = <0xf 0xfe202000 0 0x1000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
 				  0 0x20000000

 				  0x01000000 0 0x00000000
 				  0x01000000 0 0x00000000
 				  0 0x00010000>;
 		};
 	};

 	pci3: pcie@ffe203000 {
 		reg = <0xf 0xfe203000 0 0x1000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
 				  0 0x20000000

 				  0x01000000 0 0x00000000
 				  0x01000000 0 0x00000000
 				  0 0x00010000>;
 		};
 	};
 };

 /include/ "p3041si-post.dtsi"
	/*
	* P3041DS Device Tree Source
	*
	* Copyright 2010 - 2015 Freescale Semiconductor Inc.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	* * Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* * Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution.
	* * Neither the name of Freescale Semiconductor nor the
	* names of its contributors may be used to endorse or promote products
	* derived from this software without specific prior written permission.
	*
	*
	* ALTERNATIVELY, this software may be distributed under the terms of the
	* GNU General Public License ("GPL") as published by the Free Software
	* Foundation, either version 2 of that License or (at your option) any
	* later version.
	*
	* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
	* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
	* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
	* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
	* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
	* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
	* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
	* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
	* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/

	/include/ "p3041si-pre.dtsi"

	/ {
	model = "fsl,P3041DS";
	compatible = "fsl,P3041DS";
	#address-cells = <2>;
	#size-cells = <2>;
	interrupt-parent = <&mpic>;

	aliases {
	phy_rgmii_0 = &phy_rgmii_0;
	phy_rgmii_1 = &phy_rgmii_1;
	phy_sgmii_1c = &phy_sgmii_1c;
	phy_sgmii_1d = &phy_sgmii_1d;
	phy_sgmii_1e = &phy_sgmii_1e;
	phy_sgmii_1f = &phy_sgmii_1f;
	phy_xgmii_1 = &phy_xgmii_1;
	phy_xgmii_2 = &phy_xgmii_2;
	emi1_rgmii = &hydra_mdio_rgmii;
	emi1_sgmii = &hydra_mdio_sgmii;
	emi2_xgmii = &hydra_mdio_xgmii;
	};

	memory {
	device_type = "memory";
	};

	reserved-memory {
	#address-cells = <2>;
	#size-cells = <2>;
	ranges;

	bman_fbpr: bman-fbpr {
	size = <0 0x1000000>;
	alignment = <0 0x1000000>;
	};
	qman_fqd: qman-fqd {
	size = <0 0x400000>;
	alignment = <0 0x400000>;
	};
	qman_pfdr: qman-pfdr {
	size = <0 0x2000000>;
	alignment = <0 0x2000000>;
	};
	};

	dcsr: dcsr@f00000000 {
	ranges = <0x00000000 0xf 0x00000000 0x01008000>;
	};

	bportals: bman-portals@ff4000000 {
	ranges = <0x0 0xf 0xf4000000 0x200000>;
	};

	qportals: qman-portals@ff4200000 {
	ranges = <0x0 0xf 0xf4200000 0x200000>;
	};

	soc: soc@ffe000000 {
	ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
	reg = <0xf 0xfe000000 0 0x00001000>;
	spi@110000 {
	flash@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "spansion,s25sl12801", "jedec,spi-nor";
	reg = <0>;
	spi-max-frequency = <35000000>; /* input clock */
	partition@u-boot {
	label = "u-boot";
	reg = <0x00000000 0x00100000>;
	read-only;
	};
	partition@kernel {
	label = "kernel";
	reg = <0x00100000 0x00500000>;
	read-only;
	};
	partition@dtb {
	label = "dtb";
	reg = <0x00600000 0x00100000>;
	read-only;
	};
	partition@fs {
	label = "file system";
	reg = <0x00700000 0x00900000>;
	};
	};
	};

	i2c@118100 {
	eeprom@51 {
	compatible = "atmel,24c256";
	reg = <0x51>;
	};
	eeprom@52 {
	compatible = "atmel,24c256";
	reg = <0x52>;
	};
	};

	i2c@119100 {
	rtc@68 {
	compatible = "dallas,ds3232";
	reg = <0x68>;
	interrupts = <0x1 0x1 0 0>;
	};
	ina220@40 {
	compatible = "ti,ina220";
	reg = <0x40>;
	shunt-resistor = <1000>;
	};
	ina220@41 {
	compatible = "ti,ina220";
	reg = <0x41>;
	shunt-resistor = <1000>;
	};
	ina220@44 {
	compatible = "ti,ina220";
	reg = <0x44>;
	shunt-resistor = <1000>;
	};
	ina220@45 {
	compatible = "ti,ina220";
	reg = <0x45>;
	shunt-resistor = <1000>;
	};
	adt7461@4c {
	compatible = "adi,adt7461";
	reg = <0x4c>;
	};
	};

	fman@400000 {
	ethernet@e0000 {
	phy-handle = <&phy_sgmii_1c>;
	phy-connection-type = "sgmii";
	};

	ethernet@e2000 {
	phy-handle = <&phy_sgmii_1d>;
	phy-connection-type = "sgmii";
	};

	ethernet@e4000 {
	phy-handle = <&phy_sgmii_1e>;
	phy-connection-type = "sgmii";
	};

	ethernet@e6000 {
	phy-handle = <&phy_sgmii_1f>;
	phy-connection-type = "sgmii";
	};

	ethernet@e8000 {
	phy-handle = <&phy_rgmii_1>;
	phy-connection-type = "rgmii";
	};

	ethernet@f0000 {
	phy-handle = <&phy_xgmii_1>;
	phy-connection-type = "xgmii";
	};

	hydra_mdio_xgmii: mdio@f1000 {
	status = "disabled";

	phy_xgmii_1: ethernet-phy@4 {
	compatible = "ethernet-phy-ieee802.3-c45";
	reg = <0x4>;
	};

	phy_xgmii_2: ethernet-phy@0 {
	compatible = "ethernet-phy-ieee802.3-c45";
	reg = <0x0>;
	};
	};
	};
	};

	rio: rapidio@ffe0c0000 {
	reg = <0xf 0xfe0c0000 0 0x11000>;

	port1 {
	ranges = <0 0 0xc 0x20000000 0 0x10000000>;
	};
	port2 {
	ranges = <0 0 0xc 0x30000000 0 0x10000000>;
	};
	};

	lbc: localbus@ffe124000 {
	reg = <0xf 0xfe124000 0 0x1000>;
	ranges = <0 0 0xf 0xe8000000 0x08000000
	2 0 0xf 0xffa00000 0x00040000
	3 0 0xf 0xffdf0000 0x00008000>;

	flash@0,0 {
	compatible = "cfi-flash";
	reg = <0 0 0x08000000>;
	bank-width = <2>;
	device-width = <2>;
	};

	nand@2,0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "fsl,elbc-fcm-nand";
	reg = <0x2 0x0 0x40000>;

	partition@0 {
	label = "NAND U-Boot Image";
	reg = <0x0 0x02000000>;
	read-only;
	};

	partition@2000000 {
	label = "NAND Root File System";
	reg = <0x02000000 0x10000000>;
	};

	partition@12000000 {
	label = "NAND Compressed RFS Image";
	reg = <0x12000000 0x08000000>;
	};

	partition@1a000000 {
	label = "NAND Linux Kernel Image";
	reg = <0x1a000000 0x04000000>;
	};

	partition@1e000000 {
	label = "NAND DTB Image";
	reg = <0x1e000000 0x01000000>;
	};

	partition@1f000000 {
	label = "NAND Writable User area";
	reg = <0x1f000000 0x21000000>;
	};
	};

	board-control@3,0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis";
	reg = <3 0 0x30>;
	ranges = <0 3 0 0x30>;

	mdio-mux-emi1 {
	#address-cells = <1>;
	#size-cells = <0>;
	compatible = "mdio-mux-mmioreg", "mdio-mux";
	mdio-parent-bus = <&mdio0>;
	reg = <9 1>;
	mux-mask = <0x78>;

	hydra_mdio_rgmii: rgmii-mdio@8 {
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <8>;
	status = "disabled";

	phy_rgmii_0: ethernet-phy@0 {
	reg = <0x0>;
	};

	phy_rgmii_1: ethernet-phy@1 {
	reg = <0x1>;
	};
	};

	hydra_mdio_sgmii: sgmii-mdio@28 {
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x28>;
	status = "disabled";

	phy_sgmii_1c: ethernet-phy@1c {
	reg = <0x1c>;
	};

	phy_sgmii_1d: ethernet-phy@1d {
	reg = <0x1d>;
	};

	phy_sgmii_1e: ethernet-phy@1e {
	reg = <0x1e>;
	};

	phy_sgmii_1f: ethernet-phy@1f {
	reg = <0x1f>;
	};
	};
	};
	};
	};

	pci0: pcie@ffe200000 {
	reg = <0xf 0xfe200000 0 0x1000>;
	ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
	0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
	pcie@0 {
	ranges = <0x02000000 0 0xe0000000
	0x02000000 0 0xe0000000
	0 0x20000000

	0x01000000 0 0x00000000
	0x01000000 0 0x00000000
	0 0x00010000>;
	};
	};

	pci1: pcie@ffe201000 {
	reg = <0xf 0xfe201000 0 0x1000>;
	ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
	0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
	pcie@0 {
	ranges = <0x02000000 0 0xe0000000
	0x02000000 0 0xe0000000
	0 0x20000000

	0x01000000 0 0x00000000
	0x01000000 0 0x00000000
	0 0x00010000>;
	};
	};

	pci2: pcie@ffe202000 {
	reg = <0xf 0xfe202000 0 0x1000>;
	ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
	0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
	pcie@0 {
	ranges = <0x02000000 0 0xe0000000
	0x02000000 0 0xe0000000
	0 0x20000000

	0x01000000 0 0x00000000
	0x01000000 0 0x00000000
	0 0x00010000>;
	};
	};

	pci3: pcie@ffe203000 {
	reg = <0xf 0xfe203000 0 0x1000>;
	ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
	0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
	pcie@0 {
	ranges = <0x02000000 0 0xe0000000
	0x02000000 0 0xe0000000
	0 0x20000000

	0x01000000 0 0x00000000
	0x01000000 0 0x00000000
	0 0x00010000>;
	};
	};
	};

	/include/ "p3041si-post.dtsi"