| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * ACPI 3.0 based NUMA setup |
| * Copyright 2004 Andi Kleen, SuSE Labs. |
| * |
| * Reads the ACPI SRAT table to figure out what memory belongs to which CPUs. |
| * |
| * Called from acpi_numa_init while reading the SRAT and SLIT tables. |
| * Assumes all memory regions belonging to a single proximity domain |
| * are in one chunk. Holes between them will be included in the node. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/acpi.h> |
| #include <linux/mmzone.h> |
| #include <linux/bitmap.h> |
| #include <linux/init.h> |
| #include <linux/topology.h> |
| #include <linux/mm.h> |
| #include <asm/proto.h> |
| #include <asm/numa.h> |
| #include <asm/e820/api.h> |
| #include <asm/apic.h> |
| #include <asm/uv/uv.h> |
| |
| /* Callback for Proximity Domain -> x2APIC mapping */ |
| void __init |
| acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa) |
| { |
| int pxm, node; |
| int apic_id; |
| |
| if (srat_disabled()) |
| return; |
| if (pa->header.length < sizeof(struct acpi_srat_x2apic_cpu_affinity)) { |
| bad_srat(); |
| return; |
| } |
| if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0) |
| return; |
| pxm = pa->proximity_domain; |
| apic_id = pa->apic_id; |
| if (!apic_id_valid(apic_id)) { |
| pr_info("SRAT: PXM %u -> X2APIC 0x%04x ignored\n", pxm, apic_id); |
| return; |
| } |
| node = acpi_map_pxm_to_node(pxm); |
| if (node < 0) { |
| printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm); |
| bad_srat(); |
| return; |
| } |
| |
| if (apic_id >= MAX_LOCAL_APIC) { |
| printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node); |
| return; |
| } |
| set_apicid_to_node(apic_id, node); |
| node_set(node, numa_nodes_parsed); |
| printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u\n", |
| pxm, apic_id, node); |
| } |
| |
| /* Callback for Proximity Domain -> LAPIC mapping */ |
| void __init |
| acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) |
| { |
| int pxm, node; |
| int apic_id; |
| |
| if (srat_disabled()) |
| return; |
| if (pa->header.length != sizeof(struct acpi_srat_cpu_affinity)) { |
| bad_srat(); |
| return; |
| } |
| if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0) |
| return; |
| pxm = pa->proximity_domain_lo; |
| if (acpi_srat_revision >= 2) |
| pxm |= *((unsigned int*)pa->proximity_domain_hi) << 8; |
| node = acpi_map_pxm_to_node(pxm); |
| if (node < 0) { |
| printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm); |
| bad_srat(); |
| return; |
| } |
| |
| if (get_uv_system_type() >= UV_X2APIC) |
| apic_id = (pa->apic_id << 8) | pa->local_sapic_eid; |
| else |
| apic_id = pa->apic_id; |
| |
| if (apic_id >= MAX_LOCAL_APIC) { |
| printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node); |
| return; |
| } |
| |
| set_apicid_to_node(apic_id, node); |
| node_set(node, numa_nodes_parsed); |
| printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u\n", |
| pxm, apic_id, node); |
| } |
| |
| int __init x86_acpi_numa_init(void) |
| { |
| int ret; |
| |
| ret = acpi_numa_init(); |
| if (ret < 0) |
| return ret; |
| return srat_disabled() ? -EINVAL : 0; |
| } |