| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * System Control and Management Interface (SCMI) Message Protocol bus layer |
| * |
| * Copyright (C) 2018-2021 ARM Ltd. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/atomic.h> |
| #include <linux/types.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/device.h> |
| |
| #include "common.h" |
| |
| BLOCKING_NOTIFIER_HEAD(scmi_requested_devices_nh); |
| EXPORT_SYMBOL_GPL(scmi_requested_devices_nh); |
| |
| static DEFINE_IDA(scmi_bus_id); |
| |
| static DEFINE_IDR(scmi_requested_devices); |
| /* Protect access to scmi_requested_devices */ |
| static DEFINE_MUTEX(scmi_requested_devices_mtx); |
| |
| struct scmi_requested_dev { |
| const struct scmi_device_id *id_table; |
| struct list_head node; |
| }; |
| |
| /* Track globally the creation of SCMI SystemPower related devices */ |
| static atomic_t scmi_syspower_registered = ATOMIC_INIT(0); |
| |
| /** |
| * scmi_protocol_device_request - Helper to request a device |
| * |
| * @id_table: A protocol/name pair descriptor for the device to be created. |
| * |
| * This helper let an SCMI driver request specific devices identified by the |
| * @id_table to be created for each active SCMI instance. |
| * |
| * The requested device name MUST NOT be already existent for any protocol; |
| * at first the freshly requested @id_table is annotated in the IDR table |
| * @scmi_requested_devices and then the requested device is advertised to any |
| * registered party via the @scmi_requested_devices_nh notification chain. |
| * |
| * Return: 0 on Success |
| */ |
| static int scmi_protocol_device_request(const struct scmi_device_id *id_table) |
| { |
| int ret = 0; |
| unsigned int id = 0; |
| struct list_head *head, *phead = NULL; |
| struct scmi_requested_dev *rdev; |
| |
| pr_debug("Requesting SCMI device (%s) for protocol %x\n", |
| id_table->name, id_table->protocol_id); |
| |
| if (IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT) && |
| !IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT_COEX)) { |
| pr_warn("SCMI Raw mode active. Rejecting '%s'/0x%02X\n", |
| id_table->name, id_table->protocol_id); |
| return -EINVAL; |
| } |
| |
| /* |
| * Search for the matching protocol rdev list and then search |
| * of any existent equally named device...fails if any duplicate found. |
| */ |
| mutex_lock(&scmi_requested_devices_mtx); |
| idr_for_each_entry(&scmi_requested_devices, head, id) { |
| if (!phead) { |
| /* A list found registered in the IDR is never empty */ |
| rdev = list_first_entry(head, struct scmi_requested_dev, |
| node); |
| if (rdev->id_table->protocol_id == |
| id_table->protocol_id) |
| phead = head; |
| } |
| list_for_each_entry(rdev, head, node) { |
| if (!strcmp(rdev->id_table->name, id_table->name)) { |
| pr_err("Ignoring duplicate request [%d] %s\n", |
| rdev->id_table->protocol_id, |
| rdev->id_table->name); |
| ret = -EINVAL; |
| goto out; |
| } |
| } |
| } |
| |
| /* |
| * No duplicate found for requested id_table, so let's create a new |
| * requested device entry for this new valid request. |
| */ |
| rdev = kzalloc(sizeof(*rdev), GFP_KERNEL); |
| if (!rdev) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| rdev->id_table = id_table; |
| |
| /* |
| * Append the new requested device table descriptor to the head of the |
| * related protocol list, eventually creating such head if not already |
| * there. |
| */ |
| if (!phead) { |
| phead = kzalloc(sizeof(*phead), GFP_KERNEL); |
| if (!phead) { |
| kfree(rdev); |
| ret = -ENOMEM; |
| goto out; |
| } |
| INIT_LIST_HEAD(phead); |
| |
| ret = idr_alloc(&scmi_requested_devices, (void *)phead, |
| id_table->protocol_id, |
| id_table->protocol_id + 1, GFP_KERNEL); |
| if (ret != id_table->protocol_id) { |
| pr_err("Failed to save SCMI device - ret:%d\n", ret); |
| kfree(rdev); |
| kfree(phead); |
| ret = -EINVAL; |
| goto out; |
| } |
| ret = 0; |
| } |
| list_add(&rdev->node, phead); |
| |
| out: |
| mutex_unlock(&scmi_requested_devices_mtx); |
| |
| if (!ret) |
| blocking_notifier_call_chain(&scmi_requested_devices_nh, |
| SCMI_BUS_NOTIFY_DEVICE_REQUEST, |
| (void *)rdev->id_table); |
| |
| return ret; |
| } |
| |
| static int scmi_protocol_table_register(const struct scmi_device_id *id_table) |
| { |
| int ret = 0; |
| const struct scmi_device_id *entry; |
| |
| for (entry = id_table; entry->name && ret == 0; entry++) |
| ret = scmi_protocol_device_request(entry); |
| |
| return ret; |
| } |
| |
| /** |
| * scmi_protocol_device_unrequest - Helper to unrequest a device |
| * |
| * @id_table: A protocol/name pair descriptor for the device to be unrequested. |
| * |
| * The unrequested device, described by the provided id_table, is at first |
| * removed from the IDR @scmi_requested_devices and then the removal is |
| * advertised to any registered party via the @scmi_requested_devices_nh |
| * notification chain. |
| */ |
| static void scmi_protocol_device_unrequest(const struct scmi_device_id *id_table) |
| { |
| struct list_head *phead; |
| |
| pr_debug("Unrequesting SCMI device (%s) for protocol %x\n", |
| id_table->name, id_table->protocol_id); |
| |
| mutex_lock(&scmi_requested_devices_mtx); |
| phead = idr_find(&scmi_requested_devices, id_table->protocol_id); |
| if (phead) { |
| struct scmi_requested_dev *victim, *tmp; |
| |
| list_for_each_entry_safe(victim, tmp, phead, node) { |
| if (!strcmp(victim->id_table->name, id_table->name)) { |
| list_del(&victim->node); |
| |
| mutex_unlock(&scmi_requested_devices_mtx); |
| blocking_notifier_call_chain(&scmi_requested_devices_nh, |
| SCMI_BUS_NOTIFY_DEVICE_UNREQUEST, |
| (void *)victim->id_table); |
| kfree(victim); |
| mutex_lock(&scmi_requested_devices_mtx); |
| break; |
| } |
| } |
| |
| if (list_empty(phead)) { |
| idr_remove(&scmi_requested_devices, |
| id_table->protocol_id); |
| kfree(phead); |
| } |
| } |
| mutex_unlock(&scmi_requested_devices_mtx); |
| } |
| |
| static void |
| scmi_protocol_table_unregister(const struct scmi_device_id *id_table) |
| { |
| const struct scmi_device_id *entry; |
| |
| for (entry = id_table; entry->name; entry++) |
| scmi_protocol_device_unrequest(entry); |
| } |
| |
| static const struct scmi_device_id * |
| scmi_dev_match_id(struct scmi_device *scmi_dev, struct scmi_driver *scmi_drv) |
| { |
| const struct scmi_device_id *id = scmi_drv->id_table; |
| |
| if (!id) |
| return NULL; |
| |
| for (; id->protocol_id; id++) |
| if (id->protocol_id == scmi_dev->protocol_id) { |
| if (!id->name) |
| return id; |
| else if (!strcmp(id->name, scmi_dev->name)) |
| return id; |
| } |
| |
| return NULL; |
| } |
| |
| static int scmi_dev_match(struct device *dev, struct device_driver *drv) |
| { |
| struct scmi_driver *scmi_drv = to_scmi_driver(drv); |
| struct scmi_device *scmi_dev = to_scmi_dev(dev); |
| const struct scmi_device_id *id; |
| |
| id = scmi_dev_match_id(scmi_dev, scmi_drv); |
| if (id) |
| return 1; |
| |
| return 0; |
| } |
| |
| static int scmi_match_by_id_table(struct device *dev, void *data) |
| { |
| struct scmi_device *sdev = to_scmi_dev(dev); |
| struct scmi_device_id *id_table = data; |
| |
| return sdev->protocol_id == id_table->protocol_id && |
| (id_table->name && !strcmp(sdev->name, id_table->name)); |
| } |
| |
| static struct scmi_device *scmi_child_dev_find(struct device *parent, |
| int prot_id, const char *name) |
| { |
| struct scmi_device_id id_table; |
| struct device *dev; |
| |
| id_table.protocol_id = prot_id; |
| id_table.name = name; |
| |
| dev = device_find_child(parent, &id_table, scmi_match_by_id_table); |
| if (!dev) |
| return NULL; |
| |
| return to_scmi_dev(dev); |
| } |
| |
| static int scmi_dev_probe(struct device *dev) |
| { |
| struct scmi_driver *scmi_drv = to_scmi_driver(dev->driver); |
| struct scmi_device *scmi_dev = to_scmi_dev(dev); |
| |
| if (!scmi_dev->handle) |
| return -EPROBE_DEFER; |
| |
| return scmi_drv->probe(scmi_dev); |
| } |
| |
| static void scmi_dev_remove(struct device *dev) |
| { |
| struct scmi_driver *scmi_drv = to_scmi_driver(dev->driver); |
| struct scmi_device *scmi_dev = to_scmi_dev(dev); |
| |
| if (scmi_drv->remove) |
| scmi_drv->remove(scmi_dev); |
| } |
| |
| const struct bus_type scmi_bus_type = { |
| .name = "scmi_protocol", |
| .match = scmi_dev_match, |
| .probe = scmi_dev_probe, |
| .remove = scmi_dev_remove, |
| }; |
| EXPORT_SYMBOL_GPL(scmi_bus_type); |
| |
| int scmi_driver_register(struct scmi_driver *driver, struct module *owner, |
| const char *mod_name) |
| { |
| int retval; |
| |
| if (!driver->probe) |
| return -EINVAL; |
| |
| retval = scmi_protocol_table_register(driver->id_table); |
| if (retval) |
| return retval; |
| |
| driver->driver.bus = &scmi_bus_type; |
| driver->driver.name = driver->name; |
| driver->driver.owner = owner; |
| driver->driver.mod_name = mod_name; |
| |
| retval = driver_register(&driver->driver); |
| if (!retval) |
| pr_debug("Registered new scmi driver %s\n", driver->name); |
| |
| return retval; |
| } |
| EXPORT_SYMBOL_GPL(scmi_driver_register); |
| |
| void scmi_driver_unregister(struct scmi_driver *driver) |
| { |
| driver_unregister(&driver->driver); |
| scmi_protocol_table_unregister(driver->id_table); |
| } |
| EXPORT_SYMBOL_GPL(scmi_driver_unregister); |
| |
| static void scmi_device_release(struct device *dev) |
| { |
| kfree(to_scmi_dev(dev)); |
| } |
| |
| static void __scmi_device_destroy(struct scmi_device *scmi_dev) |
| { |
| pr_debug("(%s) Destroying SCMI device '%s' for protocol 0x%x (%s)\n", |
| of_node_full_name(scmi_dev->dev.parent->of_node), |
| dev_name(&scmi_dev->dev), scmi_dev->protocol_id, |
| scmi_dev->name); |
| |
| if (scmi_dev->protocol_id == SCMI_PROTOCOL_SYSTEM) |
| atomic_set(&scmi_syspower_registered, 0); |
| |
| kfree_const(scmi_dev->name); |
| ida_free(&scmi_bus_id, scmi_dev->id); |
| device_unregister(&scmi_dev->dev); |
| } |
| |
| static struct scmi_device * |
| __scmi_device_create(struct device_node *np, struct device *parent, |
| int protocol, const char *name) |
| { |
| int id, retval; |
| struct scmi_device *scmi_dev; |
| |
| /* |
| * If the same protocol/name device already exist under the same parent |
| * (i.e. SCMI instance) just return the existent device. |
| * This avoids any race between the SCMI driver, creating devices for |
| * each DT defined protocol at probe time, and the concurrent |
| * registration of SCMI drivers. |
| */ |
| scmi_dev = scmi_child_dev_find(parent, protocol, name); |
| if (scmi_dev) |
| return scmi_dev; |
| |
| /* |
| * Ignore any possible subsequent failures while creating the device |
| * since we are doomed anyway at that point; not using a mutex which |
| * spans across this whole function to keep things simple and to avoid |
| * to serialize all the __scmi_device_create calls across possibly |
| * different SCMI server instances (parent) |
| */ |
| if (protocol == SCMI_PROTOCOL_SYSTEM && |
| atomic_cmpxchg(&scmi_syspower_registered, 0, 1)) { |
| dev_warn(parent, |
| "SCMI SystemPower protocol device must be unique !\n"); |
| return NULL; |
| } |
| |
| scmi_dev = kzalloc(sizeof(*scmi_dev), GFP_KERNEL); |
| if (!scmi_dev) |
| return NULL; |
| |
| scmi_dev->name = kstrdup_const(name ?: "unknown", GFP_KERNEL); |
| if (!scmi_dev->name) { |
| kfree(scmi_dev); |
| return NULL; |
| } |
| |
| id = ida_alloc_min(&scmi_bus_id, 1, GFP_KERNEL); |
| if (id < 0) { |
| kfree_const(scmi_dev->name); |
| kfree(scmi_dev); |
| return NULL; |
| } |
| |
| scmi_dev->id = id; |
| scmi_dev->protocol_id = protocol; |
| scmi_dev->dev.parent = parent; |
| device_set_node(&scmi_dev->dev, of_fwnode_handle(np)); |
| scmi_dev->dev.bus = &scmi_bus_type; |
| scmi_dev->dev.release = scmi_device_release; |
| dev_set_name(&scmi_dev->dev, "scmi_dev.%d", id); |
| |
| retval = device_register(&scmi_dev->dev); |
| if (retval) |
| goto put_dev; |
| |
| pr_debug("(%s) Created SCMI device '%s' for protocol 0x%x (%s)\n", |
| of_node_full_name(parent->of_node), |
| dev_name(&scmi_dev->dev), protocol, name); |
| |
| return scmi_dev; |
| put_dev: |
| kfree_const(scmi_dev->name); |
| put_device(&scmi_dev->dev); |
| ida_free(&scmi_bus_id, id); |
| return NULL; |
| } |
| |
| /** |
| * scmi_device_create - A method to create one or more SCMI devices |
| * |
| * @np: A reference to the device node to use for the new device(s) |
| * @parent: The parent device to use identifying a specific SCMI instance |
| * @protocol: The SCMI protocol to be associated with this device |
| * @name: The requested-name of the device to be created; this is optional |
| * and if no @name is provided, all the devices currently known to |
| * be requested on the SCMI bus for @protocol will be created. |
| * |
| * This method can be invoked to create a single well-defined device (like |
| * a transport device or a device requested by an SCMI driver loaded after |
| * the core SCMI stack has been probed), or to create all the devices currently |
| * known to have been requested by the loaded SCMI drivers for a specific |
| * protocol (typically during SCMI core protocol enumeration at probe time). |
| * |
| * Return: The created device (or one of them if @name was NOT provided and |
| * multiple devices were created) or NULL if no device was created; |
| * note that NULL indicates an error ONLY in case a specific @name |
| * was provided: when @name param was not provided, a number of devices |
| * could have been potentially created for a whole protocol, unless no |
| * device was found to have been requested for that specific protocol. |
| */ |
| struct scmi_device *scmi_device_create(struct device_node *np, |
| struct device *parent, int protocol, |
| const char *name) |
| { |
| struct list_head *phead; |
| struct scmi_requested_dev *rdev; |
| struct scmi_device *scmi_dev = NULL; |
| |
| if (name) |
| return __scmi_device_create(np, parent, protocol, name); |
| |
| mutex_lock(&scmi_requested_devices_mtx); |
| phead = idr_find(&scmi_requested_devices, protocol); |
| /* Nothing to do. */ |
| if (!phead) { |
| mutex_unlock(&scmi_requested_devices_mtx); |
| return NULL; |
| } |
| |
| /* Walk the list of requested devices for protocol and create them */ |
| list_for_each_entry(rdev, phead, node) { |
| struct scmi_device *sdev; |
| |
| sdev = __scmi_device_create(np, parent, |
| rdev->id_table->protocol_id, |
| rdev->id_table->name); |
| /* Report errors and carry on... */ |
| if (sdev) |
| scmi_dev = sdev; |
| else |
| pr_err("(%s) Failed to create device for protocol 0x%x (%s)\n", |
| of_node_full_name(parent->of_node), |
| rdev->id_table->protocol_id, |
| rdev->id_table->name); |
| } |
| mutex_unlock(&scmi_requested_devices_mtx); |
| |
| return scmi_dev; |
| } |
| EXPORT_SYMBOL_GPL(scmi_device_create); |
| |
| void scmi_device_destroy(struct device *parent, int protocol, const char *name) |
| { |
| struct scmi_device *scmi_dev; |
| |
| scmi_dev = scmi_child_dev_find(parent, protocol, name); |
| if (scmi_dev) |
| __scmi_device_destroy(scmi_dev); |
| } |
| EXPORT_SYMBOL_GPL(scmi_device_destroy); |
| |
| static int __scmi_devices_unregister(struct device *dev, void *data) |
| { |
| struct scmi_device *scmi_dev = to_scmi_dev(dev); |
| |
| __scmi_device_destroy(scmi_dev); |
| return 0; |
| } |
| |
| static void scmi_devices_unregister(void) |
| { |
| bus_for_each_dev(&scmi_bus_type, NULL, NULL, __scmi_devices_unregister); |
| } |
| |
| static int __init scmi_bus_init(void) |
| { |
| int retval; |
| |
| retval = bus_register(&scmi_bus_type); |
| if (retval) |
| pr_err("SCMI protocol bus register failed (%d)\n", retval); |
| |
| pr_info("SCMI protocol bus registered\n"); |
| |
| return retval; |
| } |
| subsys_initcall(scmi_bus_init); |
| |
| static void __exit scmi_bus_exit(void) |
| { |
| /* |
| * Destroy all remaining devices: just in case the drivers were |
| * manually unbound and at first and then the modules unloaded. |
| */ |
| scmi_devices_unregister(); |
| bus_unregister(&scmi_bus_type); |
| ida_destroy(&scmi_bus_id); |
| } |
| module_exit(scmi_bus_exit); |
| |
| MODULE_ALIAS("scmi-core"); |
| MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>"); |
| MODULE_DESCRIPTION("ARM SCMI protocol bus"); |
| MODULE_LICENSE("GPL"); |