blob: 3de1ee05c44e4cfb3663acf13c98e2e8ff44bdbd [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Driver for Broadcom MPI3 Storage Controllers
*
* Copyright (C) 2017-2023 Broadcom Inc.
* (mailto: mpi3mr-linuxdrv.pdl@broadcom.com)
*
*/
#ifndef MPI3MR_H_INCLUDED
#define MPI3MR_H_INCLUDED
#include <linux/blkdev.h>
#include <linux/blk-mq.h>
#include <linux/blk-mq-pci.h>
#include <linux/delay.h>
#include <linux/dmapool.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/poll.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/uaccess.h>
#include <linux/utsname.h>
#include <linux/workqueue.h>
#include <asm/unaligned.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
#include <uapi/scsi/scsi_bsg_mpi3mr.h>
#include <scsi/scsi_transport_sas.h>
#include "mpi/mpi30_transport.h"
#include "mpi/mpi30_cnfg.h"
#include "mpi/mpi30_image.h"
#include "mpi/mpi30_init.h"
#include "mpi/mpi30_ioc.h"
#include "mpi/mpi30_sas.h"
#include "mpi/mpi30_pci.h"
#include "mpi3mr_debug.h"
/* Global list and lock for storing multiple adapters managed by the driver */
extern spinlock_t mrioc_list_lock;
extern struct list_head mrioc_list;
extern int prot_mask;
extern atomic64_t event_counter;
#define MPI3MR_DRIVER_VERSION "8.5.1.0.0"
#define MPI3MR_DRIVER_RELDATE "5-December-2023"
#define MPI3MR_DRIVER_NAME "mpi3mr"
#define MPI3MR_DRIVER_LICENSE "GPL"
#define MPI3MR_DRIVER_AUTHOR "Broadcom Inc. <mpi3mr-linuxdrv.pdl@broadcom.com>"
#define MPI3MR_DRIVER_DESC "MPI3 Storage Controller Device Driver"
#define MPI3MR_NAME_LENGTH 32
#define IOCNAME "%s: "
#define MPI3MR_DEFAULT_MAX_IO_SIZE (1 * 1024 * 1024)
/* Definitions for internal SGL and Chain SGL buffers */
#define MPI3MR_PAGE_SIZE_4K 4096
#define MPI3MR_DEFAULT_SGL_ENTRIES 256
#define MPI3MR_MAX_SGL_ENTRIES 2048
/* Definitions for MAX values for shost */
#define MPI3MR_MAX_CMDS_LUN 128
#define MPI3MR_MAX_CDB_LENGTH 32
/* Admin queue management definitions */
#define MPI3MR_ADMIN_REQ_Q_SIZE (2 * MPI3MR_PAGE_SIZE_4K)
#define MPI3MR_ADMIN_REPLY_Q_SIZE (4 * MPI3MR_PAGE_SIZE_4K)
#define MPI3MR_ADMIN_REQ_FRAME_SZ 128
#define MPI3MR_ADMIN_REPLY_FRAME_SZ 16
/* Operational queue management definitions */
#define MPI3MR_OP_REQ_Q_QD 512
#define MPI3MR_OP_REP_Q_QD 1024
#define MPI3MR_OP_REP_Q_QD4K 4096
#define MPI3MR_OP_REQ_Q_SEG_SIZE 4096
#define MPI3MR_OP_REP_Q_SEG_SIZE 4096
#define MPI3MR_MAX_SEG_LIST_SIZE 4096
/* Reserved Host Tag definitions */
#define MPI3MR_HOSTTAG_INVALID 0xFFFF
#define MPI3MR_HOSTTAG_INITCMDS 1
#define MPI3MR_HOSTTAG_BSG_CMDS 2
#define MPI3MR_HOSTTAG_PEL_ABORT 3
#define MPI3MR_HOSTTAG_PEL_WAIT 4
#define MPI3MR_HOSTTAG_BLK_TMS 5
#define MPI3MR_HOSTTAG_CFG_CMDS 6
#define MPI3MR_HOSTTAG_TRANSPORT_CMDS 7
#define MPI3MR_NUM_DEVRMCMD 16
#define MPI3MR_HOSTTAG_DEVRMCMD_MIN (MPI3MR_HOSTTAG_TRANSPORT_CMDS + 1)
#define MPI3MR_HOSTTAG_DEVRMCMD_MAX (MPI3MR_HOSTTAG_DEVRMCMD_MIN + \
MPI3MR_NUM_DEVRMCMD - 1)
#define MPI3MR_INTERNAL_CMDS_RESVD MPI3MR_HOSTTAG_DEVRMCMD_MAX
#define MPI3MR_NUM_EVTACKCMD 4
#define MPI3MR_HOSTTAG_EVTACKCMD_MIN (MPI3MR_HOSTTAG_DEVRMCMD_MAX + 1)
#define MPI3MR_HOSTTAG_EVTACKCMD_MAX (MPI3MR_HOSTTAG_EVTACKCMD_MIN + \
MPI3MR_NUM_EVTACKCMD - 1)
/* Reduced resource count definition for crash kernel */
#define MPI3MR_HOST_IOS_KDUMP 128
/* command/controller interaction timeout definitions in seconds */
#define MPI3MR_INTADMCMD_TIMEOUT 60
#define MPI3MR_PORTENABLE_TIMEOUT 300
#define MPI3MR_PORTENABLE_POLL_INTERVAL 5
#define MPI3MR_ABORTTM_TIMEOUT 60
#define MPI3MR_RESETTM_TIMEOUT 60
#define MPI3MR_RESET_HOST_IOWAIT_TIMEOUT 5
#define MPI3MR_TSUPDATE_INTERVAL 900
#define MPI3MR_DEFAULT_SHUTDOWN_TIME 120
#define MPI3MR_RAID_ERRREC_RESET_TIMEOUT 180
#define MPI3MR_PREPARE_FOR_RESET_TIMEOUT 180
#define MPI3MR_RESET_ACK_TIMEOUT 30
#define MPI3MR_MUR_TIMEOUT 120
#define MPI3MR_WATCHDOG_INTERVAL 1000 /* in milli seconds */
#define MPI3MR_DEFAULT_CFG_PAGE_SZ 1024 /* in bytes */
#define MPI3MR_RESET_TOPOLOGY_SETTLE_TIME 10
#define MPI3MR_SCMD_TIMEOUT (60 * HZ)
#define MPI3MR_EH_SCMD_TIMEOUT (60 * HZ)
/* Internal admin command state definitions*/
#define MPI3MR_CMD_NOTUSED 0x8000
#define MPI3MR_CMD_COMPLETE 0x0001
#define MPI3MR_CMD_PENDING 0x0002
#define MPI3MR_CMD_REPLY_VALID 0x0004
#define MPI3MR_CMD_RESET 0x0008
/* Definitions for Event replies and sense buffer allocated per controller */
#define MPI3MR_NUM_EVT_REPLIES 64
#define MPI3MR_SENSE_BUF_SZ 256
#define MPI3MR_SENSEBUF_FACTOR 3
#define MPI3MR_CHAINBUF_FACTOR 3
#define MPI3MR_CHAINBUFDIX_FACTOR 2
/* Invalid target device handle */
#define MPI3MR_INVALID_DEV_HANDLE 0xFFFF
/* Controller Reset related definitions */
#define MPI3MR_HOSTDIAG_UNLOCK_RETRY_COUNT 5
#define MPI3MR_MAX_RESET_RETRY_COUNT 3
/* ResponseCode definitions */
#define MPI3MR_RI_MASK_RESPCODE (0x000000FF)
#define MPI3MR_RSP_IO_QUEUED_ON_IOC \
MPI3_SCSITASKMGMT_RSPCODE_IO_QUEUED_ON_IOC
#define MPI3MR_DEFAULT_MDTS (128 * 1024)
#define MPI3MR_DEFAULT_PGSZEXP (12)
/* Command retry count definitions */
#define MPI3MR_DEV_RMHS_RETRY_COUNT 3
#define MPI3MR_PEL_RETRY_COUNT 3
/* Default target device queue depth */
#define MPI3MR_DEFAULT_SDEV_QD 32
/* Definitions for Threaded IRQ poll*/
#define MPI3MR_IRQ_POLL_SLEEP 2
#define MPI3MR_IRQ_POLL_TRIGGER_IOCOUNT 8
/* Definitions for the controller security status*/
#define MPI3MR_CTLR_SECURITY_STATUS_MASK 0x0C
#define MPI3MR_CTLR_SECURE_DBG_STATUS_MASK 0x02
#define MPI3MR_INVALID_DEVICE 0x00
#define MPI3MR_CONFIG_SECURE_DEVICE 0x04
#define MPI3MR_HARD_SECURE_DEVICE 0x08
#define MPI3MR_TAMPERED_DEVICE 0x0C
/* SGE Flag definition */
#define MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST \
(MPI3_SGE_FLAGS_ELEMENT_TYPE_SIMPLE | MPI3_SGE_FLAGS_DLAS_SYSTEM | \
MPI3_SGE_FLAGS_END_OF_LIST)
/* MSI Index from Reply Queue Index */
#define REPLY_QUEUE_IDX_TO_MSIX_IDX(qidx, offset) (qidx + offset)
/*
* Maximum data transfer size definitions for management
* application commands
*/
#define MPI3MR_MAX_APP_XFER_SIZE (1 * 1024 * 1024)
#define MPI3MR_MAX_APP_XFER_SEGMENTS 512
/*
* 2048 sectors are for data buffers and additional 512 sectors for
* other buffers
*/
#define MPI3MR_MAX_APP_XFER_SECTORS (2048 + 512)
#define MPI3MR_WRITE_SAME_MAX_LEN_256_BLKS 256
#define MPI3MR_WRITE_SAME_MAX_LEN_2048_BLKS 2048
/**
* struct mpi3mr_nvme_pt_sge - Structure to store SGEs for NVMe
* Encapsulated commands.
*
* @base_addr: Physical address
* @length: SGE length
* @rsvd: Reserved
* @rsvd1: Reserved
* @sub_type: sgl sub type
* @type: sgl type
*/
struct mpi3mr_nvme_pt_sge {
__le64 base_addr;
__le32 length;
u16 rsvd;
u8 rsvd1;
u8 sub_type:4;
u8 type:4;
};
/**
* struct mpi3mr_buf_map - local structure to
* track kernel and user buffers associated with an BSG
* structure.
*
* @bsg_buf: BSG buffer virtual address
* @bsg_buf_len: BSG buffer length
* @kern_buf: Kernel buffer virtual address
* @kern_buf_len: Kernel buffer length
* @kern_buf_dma: Kernel buffer DMA address
* @data_dir: Data direction.
*/
struct mpi3mr_buf_map {
void *bsg_buf;
u32 bsg_buf_len;
void *kern_buf;
u32 kern_buf_len;
dma_addr_t kern_buf_dma;
u8 data_dir;
u16 num_dma_desc;
struct dma_memory_desc *dma_desc;
};
/* IOC State definitions */
enum mpi3mr_iocstate {
MRIOC_STATE_READY = 1,
MRIOC_STATE_RESET,
MRIOC_STATE_FAULT,
MRIOC_STATE_BECOMING_READY,
MRIOC_STATE_RESET_REQUESTED,
MRIOC_STATE_UNRECOVERABLE,
};
/* Reset reason code definitions*/
enum mpi3mr_reset_reason {
MPI3MR_RESET_FROM_BRINGUP = 1,
MPI3MR_RESET_FROM_FAULT_WATCH = 2,
MPI3MR_RESET_FROM_APP = 3,
MPI3MR_RESET_FROM_EH_HOS = 4,
MPI3MR_RESET_FROM_TM_TIMEOUT = 5,
MPI3MR_RESET_FROM_APP_TIMEOUT = 6,
MPI3MR_RESET_FROM_MUR_FAILURE = 7,
MPI3MR_RESET_FROM_CTLR_CLEANUP = 8,
MPI3MR_RESET_FROM_CIACTIV_FAULT = 9,
MPI3MR_RESET_FROM_PE_TIMEOUT = 10,
MPI3MR_RESET_FROM_TSU_TIMEOUT = 11,
MPI3MR_RESET_FROM_DELREQQ_TIMEOUT = 12,
MPI3MR_RESET_FROM_DELREPQ_TIMEOUT = 13,
MPI3MR_RESET_FROM_CREATEREPQ_TIMEOUT = 14,
MPI3MR_RESET_FROM_CREATEREQQ_TIMEOUT = 15,
MPI3MR_RESET_FROM_IOCFACTS_TIMEOUT = 16,
MPI3MR_RESET_FROM_IOCINIT_TIMEOUT = 17,
MPI3MR_RESET_FROM_EVTNOTIFY_TIMEOUT = 18,
MPI3MR_RESET_FROM_EVTACK_TIMEOUT = 19,
MPI3MR_RESET_FROM_CIACTVRST_TIMER = 20,
MPI3MR_RESET_FROM_GETPKGVER_TIMEOUT = 21,
MPI3MR_RESET_FROM_PELABORT_TIMEOUT = 22,
MPI3MR_RESET_FROM_SYSFS = 23,
MPI3MR_RESET_FROM_SYSFS_TIMEOUT = 24,
MPI3MR_RESET_FROM_FIRMWARE = 27,
MPI3MR_RESET_FROM_CFG_REQ_TIMEOUT = 29,
MPI3MR_RESET_FROM_SAS_TRANSPORT_TIMEOUT = 30,
};
/* Queue type definitions */
enum queue_type {
MPI3MR_DEFAULT_QUEUE = 0,
MPI3MR_POLL_QUEUE,
};
/**
* struct mpi3mr_compimg_ver - replica of component image
* version defined in mpi30_image.h in host endianness
*
*/
struct mpi3mr_compimg_ver {
u16 build_num;
u16 cust_id;
u8 ph_minor;
u8 ph_major;
u8 gen_minor;
u8 gen_major;
};
/**
* struct mpi3mr_ioc_facs - replica of component image version
* defined in mpi30_ioc.h in host endianness
*
*/
struct mpi3mr_ioc_facts {
u32 ioc_capabilities;
struct mpi3mr_compimg_ver fw_ver;
u32 mpi_version;
u16 max_reqs;
u16 product_id;
u16 op_req_sz;
u16 reply_sz;
u16 exceptions;
u16 max_perids;
u16 max_pds;
u16 max_sasexpanders;
u32 max_data_length;
u16 max_sasinitiators;
u16 max_enclosures;
u16 max_pcie_switches;
u16 max_nvme;
u16 max_vds;
u16 max_hpds;
u16 max_advhpds;
u16 max_raid_pds;
u16 min_devhandle;
u16 max_devhandle;
u16 max_op_req_q;
u16 max_op_reply_q;
u16 shutdown_timeout;
u8 ioc_num;
u8 who_init;
u16 max_msix_vectors;
u8 personality;
u8 dma_mask;
u8 protocol_flags;
u8 sge_mod_mask;
u8 sge_mod_value;
u8 sge_mod_shift;
u8 max_dev_per_tg;
u16 max_io_throttle_group;
u16 io_throttle_data_length;
u16 io_throttle_low;
u16 io_throttle_high;
};
/**
* struct segments - memory descriptor structure to store
* virtual and dma addresses for operational queue segments.
*
* @segment: virtual address
* @segment_dma: dma address
*/
struct segments {
void *segment;
dma_addr_t segment_dma;
};
/**
* struct op_req_qinfo - Operational Request Queue Information
*
* @ci: consumer index
* @pi: producer index
* @num_request: Maximum number of entries in the queue
* @qid: Queue Id starting from 1
* @reply_qid: Associated reply queue Id
* @num_segments: Number of discontiguous memory segments
* @segment_qd: Depth of each segments
* @q_lock: Concurrent queue access lock
* @q_segments: Segment descriptor pointer
* @q_segment_list: Segment list base virtual address
* @q_segment_list_dma: Segment list base DMA address
*/
struct op_req_qinfo {
u16 ci;
u16 pi;
u16 num_requests;
u16 qid;
u16 reply_qid;
u16 num_segments;
u16 segment_qd;
spinlock_t q_lock;
struct segments *q_segments;
void *q_segment_list;
dma_addr_t q_segment_list_dma;
};
/**
* struct op_reply_qinfo - Operational Reply Queue Information
*
* @ci: consumer index
* @qid: Queue Id starting from 1
* @num_replies: Maximum number of entries in the queue
* @num_segments: Number of discontiguous memory segments
* @segment_qd: Depth of each segments
* @q_segments: Segment descriptor pointer
* @q_segment_list: Segment list base virtual address
* @q_segment_list_dma: Segment list base DMA address
* @ephase: Expected phased identifier for the reply queue
* @pend_ios: Number of IOs pending in HW for this queue
* @enable_irq_poll: Flag to indicate polling is enabled
* @in_use: Queue is handled by poll/ISR
* @qtype: Type of queue (types defined in enum queue_type)
*/
struct op_reply_qinfo {
u16 ci;
u16 qid;
u16 num_replies;
u16 num_segments;
u16 segment_qd;
struct segments *q_segments;
void *q_segment_list;
dma_addr_t q_segment_list_dma;
u8 ephase;
atomic_t pend_ios;
bool enable_irq_poll;
atomic_t in_use;
enum queue_type qtype;
};
/**
* struct mpi3mr_intr_info - Interrupt cookie information
*
* @mrioc: Adapter instance reference
* @os_irq: irq number
* @msix_index: MSIx index
* @op_reply_q: Associated operational reply queue
* @name: Dev name for the irq claiming device
*/
struct mpi3mr_intr_info {
struct mpi3mr_ioc *mrioc;
int os_irq;
u16 msix_index;
struct op_reply_qinfo *op_reply_q;
char name[MPI3MR_NAME_LENGTH];
};
/**
* struct mpi3mr_throttle_group_info - Throttle group info
*
* @io_divert: Flag indicates io divert is on or off for the TG
* @need_qd_reduction: Flag to indicate QD reduction is needed
* @qd_reduction: Queue Depth reduction in units of 10%
* @fw_qd: QueueDepth value reported by the firmware
* @modified_qd: Modified QueueDepth value due to throttling
* @id: Throttle Group ID.
* @high: High limit to turn on throttling in 512 byte blocks
* @low: Low limit to turn off throttling in 512 byte blocks
* @pend_large_data_sz: Counter to track pending large data
*/
struct mpi3mr_throttle_group_info {
u8 io_divert;
u8 need_qd_reduction;
u8 qd_reduction;
u16 fw_qd;
u16 modified_qd;
u16 id;
u32 high;
u32 low;
atomic_t pend_large_data_sz;
};
/* HBA port flags */
#define MPI3MR_HBA_PORT_FLAG_DIRTY 0x01
/* IOCTL data transfer sge*/
#define MPI3MR_NUM_IOCTL_SGE 256
#define MPI3MR_IOCTL_SGE_SIZE (8 * 1024)
/**
* struct mpi3mr_hba_port - HBA's port information
* @port_id: Port number
* @flags: HBA port flags
*/
struct mpi3mr_hba_port {
struct list_head list;
u8 port_id;
u8 flags;
};
/**
* struct mpi3mr_sas_port - Internal SAS port information
* @port_list: List of ports belonging to a SAS node
* @num_phys: Number of phys associated with port
* @marked_responding: used while refresing the sas ports
* @lowest_phy: lowest phy ID of current sas port
* @phy_mask: phy_mask of current sas port
* @hba_port: HBA port entry
* @remote_identify: Attached device identification
* @rphy: SAS transport layer rphy object
* @port: SAS transport layer port object
* @phy_list: mpi3mr_sas_phy objects belonging to this port
*/
struct mpi3mr_sas_port {
struct list_head port_list;
u8 num_phys;
u8 marked_responding;
int lowest_phy;
u64 phy_mask;
struct mpi3mr_hba_port *hba_port;
struct sas_identify remote_identify;
struct sas_rphy *rphy;
struct sas_port *port;
struct list_head phy_list;
};
/**
* struct mpi3mr_sas_phy - Internal SAS Phy information
* @port_siblings: List of phys belonging to a port
* @identify: Phy identification
* @remote_identify: Attached device identification
* @phy: SAS transport layer Phy object
* @phy_id: Unique phy id within a port
* @handle: Firmware device handle for this phy
* @attached_handle: Firmware device handle for attached device
* @phy_belongs_to_port: Flag to indicate phy belongs to port
@hba_port: HBA port entry
*/
struct mpi3mr_sas_phy {
struct list_head port_siblings;
struct sas_identify identify;
struct sas_identify remote_identify;
struct sas_phy *phy;
u8 phy_id;
u16 handle;
u16 attached_handle;
u8 phy_belongs_to_port;
struct mpi3mr_hba_port *hba_port;
};
/**
* struct mpi3mr_sas_node - SAS host/expander information
* @list: List of sas nodes in a controller
* @parent_dev: Parent device class
* @num_phys: Number phys belonging to sas_node
* @sas_address: SAS address of sas_node
* @handle: Firmware device handle for this sas_host/expander
* @sas_address_parent: SAS address of parent expander or host
* @enclosure_handle: Firmware handle of enclosure of this node
* @device_info: Capabilities of this sas_host/expander
* @non_responding: used to refresh the expander devices during reset
* @host_node: Flag to indicate this is a host_node
* @hba_port: HBA port entry
* @phy: A list of phys that make up this sas_host/expander
* @sas_port_list: List of internal ports of this node
* @rphy: sas_rphy object of this expander node
*/
struct mpi3mr_sas_node {
struct list_head list;
struct device *parent_dev;
u8 num_phys;
u64 sas_address;
u16 handle;
u64 sas_address_parent;
u16 enclosure_handle;
u64 enclosure_logical_id;
u8 non_responding;
u8 host_node;
struct mpi3mr_hba_port *hba_port;
struct mpi3mr_sas_phy *phy;
struct list_head sas_port_list;
struct sas_rphy *rphy;
};
/**
* struct mpi3mr_enclosure_node - enclosure information
* @list: List of enclosures
* @pg0: Enclosure page 0;
*/
struct mpi3mr_enclosure_node {
struct list_head list;
struct mpi3_enclosure_page0 pg0;
};
/**
* struct tgt_dev_sas_sata - SAS/SATA device specific
* information cached from firmware given data
*
* @sas_address: World wide unique SAS address
* @sas_address_parent: Sas address of parent expander or host
* @dev_info: Device information bits
* @phy_id: Phy identifier provided in device page 0
* @attached_phy_id: Attached phy identifier provided in device page 0
* @sas_transport_attached: Is this device exposed to transport
* @pend_sas_rphy_add: Flag to check device is in process of add
* @hba_port: HBA port entry
* @rphy: SAS transport layer rphy object
*/
struct tgt_dev_sas_sata {
u64 sas_address;
u64 sas_address_parent;
u16 dev_info;
u8 phy_id;
u8 attached_phy_id;
u8 sas_transport_attached;
u8 pend_sas_rphy_add;
struct mpi3mr_hba_port *hba_port;
struct sas_rphy *rphy;
};
/**
* struct tgt_dev_pcie - PCIe device specific information cached
* from firmware given data
*
* @mdts: Maximum data transfer size
* @capb: Device capabilities
* @pgsz: Device page size
* @abort_to: Timeout for abort TM
* @reset_to: Timeout for Target/LUN reset TM
* @dev_info: Device information bits
*/
struct tgt_dev_pcie {
u32 mdts;
u16 capb;
u8 pgsz;
u8 abort_to;
u8 reset_to;
u16 dev_info;
};
/**
* struct tgt_dev_vd - virtual device specific information
* cached from firmware given data
*
* @state: State of the VD
* @tg_qd_reduction: Queue Depth reduction in units of 10%
* @tg_id: VDs throttle group ID
* @high: High limit to turn on throttling in 512 byte blocks
* @low: Low limit to turn off throttling in 512 byte blocks
* @tg: Pointer to throttle group info
*/
struct tgt_dev_vd {
u8 state;
u8 tg_qd_reduction;
u16 tg_id;
u32 tg_high;
u32 tg_low;
struct mpi3mr_throttle_group_info *tg;
};
/**
* union _form_spec_inf - union of device specific information
*/
union _form_spec_inf {
struct tgt_dev_sas_sata sas_sata_inf;
struct tgt_dev_pcie pcie_inf;
struct tgt_dev_vd vd_inf;
};
enum mpi3mr_dev_state {
MPI3MR_DEV_CREATED = 1,
MPI3MR_DEV_REMOVE_HS_STARTED = 2,
MPI3MR_DEV_DELETED = 3,
};
/**
* struct mpi3mr_tgt_dev - target device data structure
*
* @list: List pointer
* @starget: Scsi_target pointer
* @dev_handle: FW device handle
* @parent_handle: FW parent device handle
* @slot: Slot number
* @encl_handle: FW enclosure handle
* @perst_id: FW assigned Persistent ID
* @devpg0_flag: Device Page0 flag
* @dev_type: SAS/SATA/PCIE device type
* @is_hidden: Should be exposed to upper layers or not
* @host_exposed: Already exposed to host or not
* @io_unit_port: IO Unit port ID
* @non_stl: Is this device not to be attached with SAS TL
* @io_throttle_enabled: I/O throttling needed or not
* @wslen: Write same max length
* @q_depth: Device specific Queue Depth
* @wwid: World wide ID
* @enclosure_logical_id: Enclosure logical identifier
* @dev_spec: Device type specific information
* @ref_count: Reference count
* @state: device state
*/
struct mpi3mr_tgt_dev {
struct list_head list;
struct scsi_target *starget;
u16 dev_handle;
u16 parent_handle;
u16 slot;
u16 encl_handle;
u16 perst_id;
u16 devpg0_flag;
u8 dev_type;
u8 is_hidden;
u8 host_exposed;
u8 io_unit_port;
u8 non_stl;
u8 io_throttle_enabled;
u16 wslen;
u16 q_depth;
u64 wwid;
u64 enclosure_logical_id;
union _form_spec_inf dev_spec;
struct kref ref_count;
enum mpi3mr_dev_state state;
};
/**
* mpi3mr_tgtdev_get - k reference incrementor
* @s: Target device reference
*
* Increment target device reference count.
*/
static inline void mpi3mr_tgtdev_get(struct mpi3mr_tgt_dev *s)
{
kref_get(&s->ref_count);
}
/**
* mpi3mr_free_tgtdev - target device memory dealloctor
* @r: k reference pointer of the target device
*
* Free target device memory when no reference.
*/
static inline void mpi3mr_free_tgtdev(struct kref *r)
{
kfree(container_of(r, struct mpi3mr_tgt_dev, ref_count));
}
/**
* mpi3mr_tgtdev_put - k reference decrementor
* @s: Target device reference
*
* Decrement target device reference count.
*/
static inline void mpi3mr_tgtdev_put(struct mpi3mr_tgt_dev *s)
{
kref_put(&s->ref_count, mpi3mr_free_tgtdev);
}
/**
* struct mpi3mr_stgt_priv_data - SCSI target private structure
*
* @starget: Scsi_target pointer
* @dev_handle: FW device handle
* @perst_id: FW assigned Persistent ID
* @num_luns: Number of Logical Units
* @block_io: I/O blocked to the device or not
* @dev_removed: Device removed in the Firmware
* @dev_removedelay: Device is waiting to be removed in FW
* @dev_type: Device type
* @dev_nvme_dif: Device is NVMe DIF enabled
* @wslen: Write same max length
* @io_throttle_enabled: I/O throttling needed or not
* @io_divert: Flag indicates io divert is on or off for the dev
* @throttle_group: Pointer to throttle group info
* @tgt_dev: Internal target device pointer
* @pend_count: Counter to track pending I/Os during error
* handling
*/
struct mpi3mr_stgt_priv_data {
struct scsi_target *starget;
u16 dev_handle;
u16 perst_id;
u32 num_luns;
atomic_t block_io;
u8 dev_removed;
u8 dev_removedelay;
u8 dev_type;
u8 dev_nvme_dif;
u16 wslen;
u8 io_throttle_enabled;
u8 io_divert;
struct mpi3mr_throttle_group_info *throttle_group;
struct mpi3mr_tgt_dev *tgt_dev;
u32 pend_count;
};
/**
* struct mpi3mr_stgt_priv_data - SCSI device private structure
*
* @tgt_priv_data: Scsi_target private data pointer
* @lun_id: LUN ID of the device
* @ncq_prio_enable: NCQ priority enable for SATA device
* @pend_count: Counter to track pending I/Os during error
* handling
* @wslen: Write same max length
*/
struct mpi3mr_sdev_priv_data {
struct mpi3mr_stgt_priv_data *tgt_priv_data;
u32 lun_id;
u8 ncq_prio_enable;
u32 pend_count;
u16 wslen;
};
/**
* struct mpi3mr_drv_cmd - Internal command tracker
*
* @mutex: Command mutex
* @done: Completeor for wakeup
* @reply: Firmware reply for internal commands
* @sensebuf: Sensebuf for SCSI IO commands
* @iou_rc: IO Unit control reason code
* @state: Command State
* @dev_handle: Firmware handle for device specific commands
* @ioc_status: IOC status from the firmware
* @ioc_loginfo:IOC log info from the firmware
* @is_waiting: Is the command issued in block mode
* @is_sense: Is Sense data present
* @retry_count: Retry count for retriable commands
* @host_tag: Host tag used by the command
* @callback: Callback for non blocking commands
*/
struct mpi3mr_drv_cmd {
struct mutex mutex;
struct completion done;
void *reply;
u8 *sensebuf;
u8 iou_rc;
u16 state;
u16 dev_handle;
u16 ioc_status;
u32 ioc_loginfo;
u8 is_waiting;
u8 is_sense;
u8 retry_count;
u16 host_tag;
void (*callback)(struct mpi3mr_ioc *mrioc,
struct mpi3mr_drv_cmd *drv_cmd);
};
/**
* struct dma_memory_desc - memory descriptor structure to store
* virtual address, dma address and size for any generic dma
* memory allocations in the driver.
*
* @size: buffer size
* @addr: virtual address
* @dma_addr: dma address
*/
struct dma_memory_desc {
u32 size;
void *addr;
dma_addr_t dma_addr;
};
/**
* struct chain_element - memory descriptor structure to store
* virtual and dma addresses for chain elements.
*
* @addr: virtual address
* @dma_addr: dma address
*/
struct chain_element {
void *addr;
dma_addr_t dma_addr;
};
/**
* struct scmd_priv - SCSI command private data
*
* @host_tag: Host tag specific to operational queue
* @in_lld_scope: Command in LLD scope or not
* @meta_sg_valid: DIX command with meta data SGL or not
* @scmd: SCSI Command pointer
* @req_q_idx: Operational request queue index
* @chain_idx: Chain frame index
* @meta_chain_idx: Chain frame index of meta data SGL
* @mpi3mr_scsiio_req: MPI SCSI IO request
*/
struct scmd_priv {
u16 host_tag;
u8 in_lld_scope;
u8 meta_sg_valid;
struct scsi_cmnd *scmd;
u16 req_q_idx;
int chain_idx;
int meta_chain_idx;
u8 mpi3mr_scsiio_req[MPI3MR_ADMIN_REQ_FRAME_SZ];
};
/**
* struct mpi3mr_ioc - Adapter anchor structure stored in shost
* private data
*
* @list: List pointer
* @pdev: PCI device pointer
* @shost: Scsi_Host pointer
* @id: Controller ID
* @cpu_count: Number of online CPUs
* @irqpoll_sleep: usleep unit used in threaded isr irqpoll
* @name: Controller ASCII name
* @driver_name: Driver ASCII name
* @sysif_regs: System interface registers virtual address
* @sysif_regs_phys: System interface registers physical address
* @bars: PCI BARS
* @dma_mask: DMA mask
* @msix_count: Number of MSIX vectors used
* @intr_enabled: Is interrupts enabled
* @num_admin_req: Number of admin requests
* @admin_req_q_sz: Admin request queue size
* @admin_req_pi: Admin request queue producer index
* @admin_req_ci: Admin request queue consumer index
* @admin_req_base: Admin request queue base virtual address
* @admin_req_dma: Admin request queue base dma address
* @admin_req_lock: Admin queue access lock
* @num_admin_replies: Number of admin replies
* @admin_reply_q_sz: Admin reply queue size
* @admin_reply_ci: Admin reply queue consumer index
* @admin_reply_ephase:Admin reply queue expected phase
* @admin_reply_base: Admin reply queue base virtual address
* @admin_reply_dma: Admin reply queue base dma address
* @admin_reply_q_in_use: Queue is handled by poll/ISR
* @ready_timeout: Controller ready timeout
* @intr_info: Interrupt cookie pointer
* @intr_info_count: Number of interrupt cookies
* @is_intr_info_set: Flag to indicate intr info is setup
* @num_queues: Number of operational queues
* @num_op_req_q: Number of operational request queues
* @req_qinfo: Operational request queue info pointer
* @num_op_reply_q: Number of operational reply queues
* @op_reply_qinfo: Operational reply queue info pointer
* @init_cmds: Command tracker for initialization commands
* @cfg_cmds: Command tracker for configuration requests
* @facts: Cached IOC facts data
* @op_reply_desc_sz: Operational reply descriptor size
* @num_reply_bufs: Number of reply buffers allocated
* @reply_buf_pool: Reply buffer pool
* @reply_buf: Reply buffer base virtual address
* @reply_buf_dma: Reply buffer DMA address
* @reply_buf_dma_max_address: Reply DMA address max limit
* @reply_free_qsz: Reply free queue size
* @reply_free_q_pool: Reply free queue pool
* @reply_free_q: Reply free queue base virtual address
* @reply_free_q_dma: Reply free queue base DMA address
* @reply_free_queue_lock: Reply free queue lock
* @reply_free_queue_host_index: Reply free queue host index
* @num_sense_bufs: Number of sense buffers
* @sense_buf_pool: Sense buffer pool
* @sense_buf: Sense buffer base virtual address
* @sense_buf_dma: Sense buffer base DMA address
* @sense_buf_q_sz: Sense buffer queue size
* @sense_buf_q_pool: Sense buffer queue pool
* @sense_buf_q: Sense buffer queue virtual address
* @sense_buf_q_dma: Sense buffer queue DMA address
* @sbq_lock: Sense buffer queue lock
* @sbq_host_index: Sense buffer queuehost index
* @event_masks: Event mask bitmap
* @fwevt_worker_name: Firmware event worker thread name
* @fwevt_worker_thread: Firmware event worker thread
* @fwevt_lock: Firmware event lock
* @fwevt_list: Firmware event list
* @watchdog_work_q_name: Fault watchdog worker thread name
* @watchdog_work_q: Fault watchdog worker thread
* @watchdog_work: Fault watchdog work
* @watchdog_lock: Fault watchdog lock
* @is_driver_loading: Is driver still loading
* @scan_started: Async scan started
* @scan_failed: Asycn scan failed
* @stop_drv_processing: Stop all command processing
* @device_refresh_on: Don't process the events until devices are refreshed
* @max_host_ios: Maximum host I/O count
* @max_sgl_entries: Max SGL entries per I/O
* @chain_buf_count: Chain buffer count
* @chain_buf_pool: Chain buffer pool
* @chain_sgl_list: Chain SGL list
* @chain_bitmap: Chain buffer allocator bitmap
* @chain_buf_lock: Chain buffer list lock
* @bsg_cmds: Command tracker for BSG command
* @host_tm_cmds: Command tracker for task management commands
* @dev_rmhs_cmds: Command tracker for device removal commands
* @evtack_cmds: Command tracker for event ack commands
* @devrem_bitmap: Device removal bitmap
* @dev_handle_bitmap_bits: Number of bits in device handle bitmap
* @removepend_bitmap: Remove pending bitmap
* @delayed_rmhs_list: Delayed device removal list
* @evtack_cmds_bitmap: Event Ack bitmap
* @delayed_evtack_cmds_list: Delayed event acknowledgment list
* @ts_update_counter: Timestamp update counter
* @reset_in_progress: Reset in progress flag
* @unrecoverable: Controller unrecoverable flag
* @prev_reset_result: Result of previous reset
* @reset_mutex: Controller reset mutex
* @reset_waitq: Controller reset wait queue
* @prepare_for_reset: Prepare for reset event received
* @prepare_for_reset_timeout_counter: Prepare for reset timeout
* @prp_list_virt: NVMe encapsulated PRP list virtual base
* @prp_list_dma: NVMe encapsulated PRP list DMA
* @prp_sz: NVME encapsulated PRP list size
* @diagsave_timeout: Diagnostic information save timeout
* @logging_level: Controller debug logging level
* @flush_io_count: I/O count to flush after reset
* @current_event: Firmware event currently in process
* @driver_info: Driver, Kernel, OS information to firmware
* @change_count: Topology change count
* @pel_enabled: Persistent Event Log(PEL) enabled or not
* @pel_abort_requested: PEL abort is requested or not
* @pel_class: PEL Class identifier
* @pel_locale: PEL Locale identifier
* @pel_cmds: Command tracker for PEL wait command
* @pel_abort_cmd: Command tracker for PEL abort command
* @pel_newest_seqnum: Newest PEL sequenece number
* @pel_seqnum_virt: PEL sequence number virtual address
* @pel_seqnum_dma: PEL sequence number DMA address
* @pel_seqnum_sz: PEL sequenece number size
* @op_reply_q_offset: Operational reply queue offset with MSIx
* @default_qcount: Total Default queues
* @active_poll_qcount: Currently active poll queue count
* @requested_poll_qcount: User requested poll queue count
* @bsg_dev: BSG device structure
* @bsg_queue: Request queue for BSG device
* @stop_bsgs: Stop BSG request flag
* @logdata_buf: Circular buffer to store log data entries
* @logdata_buf_idx: Index of entry in buffer to store
* @logdata_entry_sz: log data entry size
* @pend_large_data_sz: Counter to track pending large data
* @io_throttle_data_length: I/O size to track in 512b blocks
* @io_throttle_high: I/O size to start throttle in 512b blocks
* @io_throttle_low: I/O size to stop throttle in 512b blocks
* @num_io_throttle_group: Maximum number of throttle groups
* @throttle_groups: Pointer to throttle group info structures
* @cfg_page: Default memory for configuration pages
* @cfg_page_dma: Configuration page DMA address
* @cfg_page_sz: Default configuration page memory size
* @sas_transport_enabled: SAS transport enabled or not
* @scsi_device_channel: Channel ID for SCSI devices
* @transport_cmds: Command tracker for SAS transport commands
* @sas_hba: SAS node for the controller
* @sas_expander_list: SAS node list of expanders
* @sas_node_lock: Lock to protect SAS node list
* @hba_port_table_list: List of HBA Ports
* @enclosure_list: List of Enclosure objects
* @ioctl_dma_pool: DMA pool for IOCTL data buffers
* @ioctl_sge: DMA buffer descriptors for IOCTL data
* @ioctl_chain_sge: DMA buffer descriptor for IOCTL chain
* @ioctl_resp_sge: DMA buffer descriptor for Mgmt cmd response
* @ioctl_sges_allocated: Flag for IOCTL SGEs allocated or not
*/
struct mpi3mr_ioc {
struct list_head list;
struct pci_dev *pdev;
struct Scsi_Host *shost;
u8 id;
int cpu_count;
bool enable_segqueue;
u32 irqpoll_sleep;
char name[MPI3MR_NAME_LENGTH];
char driver_name[MPI3MR_NAME_LENGTH];
volatile struct mpi3_sysif_registers __iomem *sysif_regs;
resource_size_t sysif_regs_phys;
int bars;
u64 dma_mask;
u16 msix_count;
u8 intr_enabled;
u16 num_admin_req;
u32 admin_req_q_sz;
u16 admin_req_pi;
u16 admin_req_ci;
void *admin_req_base;
dma_addr_t admin_req_dma;
spinlock_t admin_req_lock;
u16 num_admin_replies;
u32 admin_reply_q_sz;
u16 admin_reply_ci;
u8 admin_reply_ephase;
void *admin_reply_base;
dma_addr_t admin_reply_dma;
atomic_t admin_reply_q_in_use;
u32 ready_timeout;
struct mpi3mr_intr_info *intr_info;
u16 intr_info_count;
bool is_intr_info_set;
u16 num_queues;
u16 num_op_req_q;
struct op_req_qinfo *req_qinfo;
u16 num_op_reply_q;
struct op_reply_qinfo *op_reply_qinfo;
struct mpi3mr_drv_cmd init_cmds;
struct mpi3mr_drv_cmd cfg_cmds;
struct mpi3mr_ioc_facts facts;
u16 op_reply_desc_sz;
u32 num_reply_bufs;
struct dma_pool *reply_buf_pool;
u8 *reply_buf;
dma_addr_t reply_buf_dma;
dma_addr_t reply_buf_dma_max_address;
u16 reply_free_qsz;
u16 reply_sz;
struct dma_pool *reply_free_q_pool;
__le64 *reply_free_q;
dma_addr_t reply_free_q_dma;
spinlock_t reply_free_queue_lock;
u32 reply_free_queue_host_index;
u32 num_sense_bufs;
struct dma_pool *sense_buf_pool;
u8 *sense_buf;
dma_addr_t sense_buf_dma;
u16 sense_buf_q_sz;
struct dma_pool *sense_buf_q_pool;
__le64 *sense_buf_q;
dma_addr_t sense_buf_q_dma;
spinlock_t sbq_lock;
u32 sbq_host_index;
u32 event_masks[MPI3_EVENT_NOTIFY_EVENTMASK_WORDS];
char fwevt_worker_name[MPI3MR_NAME_LENGTH];
struct workqueue_struct *fwevt_worker_thread;
spinlock_t fwevt_lock;
struct list_head fwevt_list;
char watchdog_work_q_name[20];
struct workqueue_struct *watchdog_work_q;
struct delayed_work watchdog_work;
spinlock_t watchdog_lock;
u8 is_driver_loading;
u8 scan_started;
u16 scan_failed;
u8 stop_drv_processing;
u8 device_refresh_on;
u16 max_host_ios;
spinlock_t tgtdev_lock;
struct list_head tgtdev_list;
u16 max_sgl_entries;
u32 chain_buf_count;
struct dma_pool *chain_buf_pool;
struct chain_element *chain_sgl_list;
unsigned long *chain_bitmap;
spinlock_t chain_buf_lock;
struct mpi3mr_drv_cmd bsg_cmds;
struct mpi3mr_drv_cmd host_tm_cmds;
struct mpi3mr_drv_cmd dev_rmhs_cmds[MPI3MR_NUM_DEVRMCMD];
struct mpi3mr_drv_cmd evtack_cmds[MPI3MR_NUM_EVTACKCMD];
unsigned long *devrem_bitmap;
u16 dev_handle_bitmap_bits;
unsigned long *removepend_bitmap;
struct list_head delayed_rmhs_list;
unsigned long *evtack_cmds_bitmap;
struct list_head delayed_evtack_cmds_list;
u32 ts_update_counter;
u8 reset_in_progress;
u8 unrecoverable;
int prev_reset_result;
struct mutex reset_mutex;
wait_queue_head_t reset_waitq;
u8 prepare_for_reset;
u16 prepare_for_reset_timeout_counter;
void *prp_list_virt;
dma_addr_t prp_list_dma;
u32 prp_sz;
u16 diagsave_timeout;
int logging_level;
u16 flush_io_count;
struct mpi3mr_fwevt *current_event;
struct mpi3_driver_info_layout driver_info;
u16 change_count;
u8 pel_enabled;
u8 pel_abort_requested;
u8 pel_class;
u16 pel_locale;
struct mpi3mr_drv_cmd pel_cmds;
struct mpi3mr_drv_cmd pel_abort_cmd;
u32 pel_newest_seqnum;
void *pel_seqnum_virt;
dma_addr_t pel_seqnum_dma;
u32 pel_seqnum_sz;
u16 op_reply_q_offset;
u16 default_qcount;
u16 active_poll_qcount;
u16 requested_poll_qcount;
struct device bsg_dev;
struct request_queue *bsg_queue;
u8 stop_bsgs;
u8 *logdata_buf;
u16 logdata_buf_idx;
u16 logdata_entry_sz;
atomic_t pend_large_data_sz;
u32 io_throttle_data_length;
u32 io_throttle_high;
u32 io_throttle_low;
u16 num_io_throttle_group;
struct mpi3mr_throttle_group_info *throttle_groups;
void *cfg_page;
dma_addr_t cfg_page_dma;
u16 cfg_page_sz;
u8 sas_transport_enabled;
u8 scsi_device_channel;
struct mpi3mr_drv_cmd transport_cmds;
struct mpi3mr_sas_node sas_hba;
struct list_head sas_expander_list;
spinlock_t sas_node_lock;
struct list_head hba_port_table_list;
struct list_head enclosure_list;
struct dma_pool *ioctl_dma_pool;
struct dma_memory_desc ioctl_sge[MPI3MR_NUM_IOCTL_SGE];
struct dma_memory_desc ioctl_chain_sge;
struct dma_memory_desc ioctl_resp_sge;
bool ioctl_sges_allocated;
};
/**
* struct mpi3mr_fwevt - Firmware event structure.
*
* @list: list head
* @work: Work structure
* @mrioc: Adapter instance reference
* @event_id: MPI3 firmware event ID
* @send_ack: Event acknowledgment required or not
* @process_evt: Bottomhalf processing required or not
* @evt_ctx: Event context to send in Ack
* @event_data_size: size of the event data in bytes
* @pending_at_sml: waiting for device add/remove API to complete
* @discard: discard this event
* @ref_count: kref count
* @event_data: Actual MPI3 event data
*/
struct mpi3mr_fwevt {
struct list_head list;
struct work_struct work;
struct mpi3mr_ioc *mrioc;
u16 event_id;
bool send_ack;
bool process_evt;
u32 evt_ctx;
u16 event_data_size;
bool pending_at_sml;
bool discard;
struct kref ref_count;
char event_data[] __aligned(4);
};
/**
* struct delayed_dev_rmhs_node - Delayed device removal node
*
* @list: list head
* @handle: Device handle
* @iou_rc: IO Unit Control Reason Code
*/
struct delayed_dev_rmhs_node {
struct list_head list;
u16 handle;
u8 iou_rc;
};
/**
* struct delayed_evt_ack_node - Delayed event ack node
* @list: list head
* @event: MPI3 event ID
* @event_ctx: event context
*/
struct delayed_evt_ack_node {
struct list_head list;
u8 event;
u32 event_ctx;
};
int mpi3mr_setup_resources(struct mpi3mr_ioc *mrioc);
void mpi3mr_cleanup_resources(struct mpi3mr_ioc *mrioc);
int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc);
int mpi3mr_reinit_ioc(struct mpi3mr_ioc *mrioc, u8 is_resume);
void mpi3mr_cleanup_ioc(struct mpi3mr_ioc *mrioc);
int mpi3mr_issue_port_enable(struct mpi3mr_ioc *mrioc, u8 async);
int mpi3mr_admin_request_post(struct mpi3mr_ioc *mrioc, void *admin_req,
u16 admin_req_sz, u8 ignore_reset);
int mpi3mr_op_request_post(struct mpi3mr_ioc *mrioc,
struct op_req_qinfo *opreqq, u8 *req);
void mpi3mr_add_sg_single(void *paddr, u8 flags, u32 length,
dma_addr_t dma_addr);
void mpi3mr_build_zero_len_sge(void *paddr);
void *mpi3mr_get_sensebuf_virt_addr(struct mpi3mr_ioc *mrioc,
dma_addr_t phys_addr);
void *mpi3mr_get_reply_virt_addr(struct mpi3mr_ioc *mrioc,
dma_addr_t phys_addr);
void mpi3mr_repost_sense_buf(struct mpi3mr_ioc *mrioc,
u64 sense_buf_dma);
void mpi3mr_memset_buffers(struct mpi3mr_ioc *mrioc);
void mpi3mr_free_mem(struct mpi3mr_ioc *mrioc);
void mpi3mr_os_handle_events(struct mpi3mr_ioc *mrioc,
struct mpi3_event_notification_reply *event_reply);
void mpi3mr_process_op_reply_desc(struct mpi3mr_ioc *mrioc,
struct mpi3_default_reply_descriptor *reply_desc,
u64 *reply_dma, u16 qidx);
void mpi3mr_start_watchdog(struct mpi3mr_ioc *mrioc);
void mpi3mr_stop_watchdog(struct mpi3mr_ioc *mrioc);
int mpi3mr_soft_reset_handler(struct mpi3mr_ioc *mrioc,
u32 reset_reason, u8 snapdump);
void mpi3mr_ioc_disable_intr(struct mpi3mr_ioc *mrioc);
void mpi3mr_ioc_enable_intr(struct mpi3mr_ioc *mrioc);
enum mpi3mr_iocstate mpi3mr_get_iocstate(struct mpi3mr_ioc *mrioc);
int mpi3mr_process_event_ack(struct mpi3mr_ioc *mrioc, u8 event,
u32 event_ctx);
void mpi3mr_wait_for_host_io(struct mpi3mr_ioc *mrioc, u32 timeout);
void mpi3mr_cleanup_fwevt_list(struct mpi3mr_ioc *mrioc);
void mpi3mr_flush_host_io(struct mpi3mr_ioc *mrioc);
void mpi3mr_invalidate_devhandles(struct mpi3mr_ioc *mrioc);
void mpi3mr_rfresh_tgtdevs(struct mpi3mr_ioc *mrioc);
void mpi3mr_flush_delayed_cmd_lists(struct mpi3mr_ioc *mrioc);
void mpi3mr_check_rh_fault_ioc(struct mpi3mr_ioc *mrioc, u32 reason_code);
void mpi3mr_print_fault_info(struct mpi3mr_ioc *mrioc);
void mpi3mr_check_rh_fault_ioc(struct mpi3mr_ioc *mrioc, u32 reason_code);
int mpi3mr_process_op_reply_q(struct mpi3mr_ioc *mrioc,
struct op_reply_qinfo *op_reply_q);
int mpi3mr_blk_mq_poll(struct Scsi_Host *shost, unsigned int queue_num);
void mpi3mr_bsg_init(struct mpi3mr_ioc *mrioc);
void mpi3mr_bsg_exit(struct mpi3mr_ioc *mrioc);
int mpi3mr_issue_tm(struct mpi3mr_ioc *mrioc, u8 tm_type,
u16 handle, uint lun, u16 htag, ulong timeout,
struct mpi3mr_drv_cmd *drv_cmd,
u8 *resp_code, struct scsi_cmnd *scmd);
struct mpi3mr_tgt_dev *mpi3mr_get_tgtdev_by_handle(
struct mpi3mr_ioc *mrioc, u16 handle);
void mpi3mr_pel_get_seqnum_complete(struct mpi3mr_ioc *mrioc,
struct mpi3mr_drv_cmd *drv_cmd);
int mpi3mr_pel_get_seqnum_post(struct mpi3mr_ioc *mrioc,
struct mpi3mr_drv_cmd *drv_cmd);
void mpi3mr_app_save_logdata(struct mpi3mr_ioc *mrioc, char *event_data,
u16 event_data_size);
struct mpi3mr_enclosure_node *mpi3mr_enclosure_find_by_handle(
struct mpi3mr_ioc *mrioc, u16 handle);
extern const struct attribute_group *mpi3mr_host_groups[];
extern const struct attribute_group *mpi3mr_dev_groups[];
extern struct sas_function_template mpi3mr_transport_functions;
extern struct scsi_transport_template *mpi3mr_transport_template;
int mpi3mr_cfg_get_dev_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status,
struct mpi3_device_page0 *dev_pg0, u16 pg_sz, u32 form, u32 form_spec);
int mpi3mr_cfg_get_sas_phy_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status,
struct mpi3_sas_phy_page0 *phy_pg0, u16 pg_sz, u32 form,
u32 form_spec);
int mpi3mr_cfg_get_sas_phy_pg1(struct mpi3mr_ioc *mrioc, u16 *ioc_status,
struct mpi3_sas_phy_page1 *phy_pg1, u16 pg_sz, u32 form,
u32 form_spec);
int mpi3mr_cfg_get_sas_exp_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status,
struct mpi3_sas_expander_page0 *exp_pg0, u16 pg_sz, u32 form,
u32 form_spec);
int mpi3mr_cfg_get_sas_exp_pg1(struct mpi3mr_ioc *mrioc, u16 *ioc_status,
struct mpi3_sas_expander_page1 *exp_pg1, u16 pg_sz, u32 form,
u32 form_spec);
int mpi3mr_cfg_get_enclosure_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status,
struct mpi3_enclosure_page0 *encl_pg0, u16 pg_sz, u32 form,
u32 form_spec);
int mpi3mr_cfg_get_sas_io_unit_pg0(struct mpi3mr_ioc *mrioc,
struct mpi3_sas_io_unit_page0 *sas_io_unit_pg0, u16 pg_sz);
int mpi3mr_cfg_get_sas_io_unit_pg1(struct mpi3mr_ioc *mrioc,
struct mpi3_sas_io_unit_page1 *sas_io_unit_pg1, u16 pg_sz);
int mpi3mr_cfg_set_sas_io_unit_pg1(struct mpi3mr_ioc *mrioc,
struct mpi3_sas_io_unit_page1 *sas_io_unit_pg1, u16 pg_sz);
int mpi3mr_cfg_get_driver_pg1(struct mpi3mr_ioc *mrioc,
struct mpi3_driver_page1 *driver_pg1, u16 pg_sz);
u8 mpi3mr_is_expander_device(u16 device_info);
int mpi3mr_expander_add(struct mpi3mr_ioc *mrioc, u16 handle);
void mpi3mr_expander_remove(struct mpi3mr_ioc *mrioc, u64 sas_address,
struct mpi3mr_hba_port *hba_port);
struct mpi3mr_sas_node *__mpi3mr_expander_find_by_handle(struct mpi3mr_ioc
*mrioc, u16 handle);
struct mpi3mr_hba_port *mpi3mr_get_hba_port_by_id(struct mpi3mr_ioc *mrioc,
u8 port_id);
void mpi3mr_sas_host_refresh(struct mpi3mr_ioc *mrioc);
void mpi3mr_sas_host_add(struct mpi3mr_ioc *mrioc);
void mpi3mr_update_links(struct mpi3mr_ioc *mrioc,
u64 sas_address_parent, u16 handle, u8 phy_number, u8 link_rate,
struct mpi3mr_hba_port *hba_port);
void mpi3mr_remove_tgtdev_from_host(struct mpi3mr_ioc *mrioc,
struct mpi3mr_tgt_dev *tgtdev);
int mpi3mr_report_tgtdev_to_sas_transport(struct mpi3mr_ioc *mrioc,
struct mpi3mr_tgt_dev *tgtdev);
void mpi3mr_remove_tgtdev_from_sas_transport(struct mpi3mr_ioc *mrioc,
struct mpi3mr_tgt_dev *tgtdev);
struct mpi3mr_tgt_dev *__mpi3mr_get_tgtdev_by_addr_and_rphy(
struct mpi3mr_ioc *mrioc, u64 sas_address, struct sas_rphy *rphy);
void mpi3mr_print_device_event_notice(struct mpi3mr_ioc *mrioc,
bool device_add);
void mpi3mr_refresh_sas_ports(struct mpi3mr_ioc *mrioc);
void mpi3mr_refresh_expanders(struct mpi3mr_ioc *mrioc);
void mpi3mr_add_event_wait_for_device_refresh(struct mpi3mr_ioc *mrioc);
void mpi3mr_flush_drv_cmds(struct mpi3mr_ioc *mrioc);
void mpi3mr_flush_cmds_for_unrecovered_controller(struct mpi3mr_ioc *mrioc);
void mpi3mr_free_enclosure_list(struct mpi3mr_ioc *mrioc);
int mpi3mr_process_admin_reply_q(struct mpi3mr_ioc *mrioc);
void mpi3mr_expander_node_remove(struct mpi3mr_ioc *mrioc,
struct mpi3mr_sas_node *sas_expander);
#endif /*MPI3MR_H_INCLUDED*/