| /* |
| * This file contains the 64-bit "server" PowerPC variant |
| * of the low level exception handling including exception |
| * vectors, exception return, part of the slb and stab |
| * handling and other fixed offset specific things. |
| * |
| * This file is meant to be #included from head_64.S due to |
| * position dependent assembly. |
| * |
| * Most of this originates from head_64.S and thus has the same |
| * copyright history. |
| * |
| */ |
| |
| #include <asm/hw_irq.h> |
| #include <asm/exception-64s.h> |
| #include <asm/ptrace.h> |
| #include <asm/cpuidle.h> |
| |
| /* |
| * We layout physical memory as follows: |
| * 0x0000 - 0x00ff : Secondary processor spin code |
| * 0x0100 - 0x17ff : pSeries Interrupt prologs |
| * 0x1800 - 0x4000 : interrupt support common interrupt prologs |
| * 0x4000 - 0x5fff : pSeries interrupts with IR=1,DR=1 |
| * 0x6000 - 0x6fff : more interrupt support including for IR=1,DR=1 |
| * 0x7000 - 0x7fff : FWNMI data area |
| * 0x8000 - 0x8fff : Initial (CPU0) segment table |
| * 0x9000 - : Early init and support code |
| */ |
| /* Syscall routine is used twice, in reloc-off and reloc-on paths */ |
| #define SYSCALL_PSERIES_1 \ |
| BEGIN_FTR_SECTION \ |
| cmpdi r0,0x1ebe ; \ |
| beq- 1f ; \ |
| END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) \ |
| mr r9,r13 ; \ |
| GET_PACA(r13) ; \ |
| mfspr r11,SPRN_SRR0 ; \ |
| 0: |
| |
| #define SYSCALL_PSERIES_2_RFID \ |
| mfspr r12,SPRN_SRR1 ; \ |
| ld r10,PACAKBASE(r13) ; \ |
| LOAD_HANDLER(r10, system_call_entry) ; \ |
| mtspr SPRN_SRR0,r10 ; \ |
| ld r10,PACAKMSR(r13) ; \ |
| mtspr SPRN_SRR1,r10 ; \ |
| rfid ; \ |
| b . ; /* prevent speculative execution */ |
| |
| #define SYSCALL_PSERIES_3 \ |
| /* Fast LE/BE switch system call */ \ |
| 1: mfspr r12,SPRN_SRR1 ; \ |
| xori r12,r12,MSR_LE ; \ |
| mtspr SPRN_SRR1,r12 ; \ |
| rfid ; /* return to userspace */ \ |
| b . ; /* prevent speculative execution */ |
| |
| #if defined(CONFIG_RELOCATABLE) |
| /* |
| * We can't branch directly so we do it via the CTR which |
| * is volatile across system calls. |
| */ |
| #define SYSCALL_PSERIES_2_DIRECT \ |
| mflr r10 ; \ |
| ld r12,PACAKBASE(r13) ; \ |
| LOAD_HANDLER(r12, system_call_entry) ; \ |
| mtctr r12 ; \ |
| mfspr r12,SPRN_SRR1 ; \ |
| /* Re-use of r13... No spare regs to do this */ \ |
| li r13,MSR_RI ; \ |
| mtmsrd r13,1 ; \ |
| GET_PACA(r13) ; /* get r13 back */ \ |
| bctr ; |
| #else |
| /* We can branch directly */ |
| #define SYSCALL_PSERIES_2_DIRECT \ |
| mfspr r12,SPRN_SRR1 ; \ |
| li r10,MSR_RI ; \ |
| mtmsrd r10,1 ; /* Set RI (EE=0) */ \ |
| b system_call_common ; |
| #endif |
| |
| /* |
| * This is the start of the interrupt handlers for pSeries |
| * This code runs with relocation off. |
| * Code from here to __end_interrupts gets copied down to real |
| * address 0x100 when we are running a relocatable kernel. |
| * Therefore any relative branches in this section must only |
| * branch to labels in this section. |
| */ |
| . = 0x100 |
| .globl __start_interrupts |
| __start_interrupts: |
| |
| .globl system_reset_pSeries; |
| system_reset_pSeries: |
| SET_SCRATCH0(r13) |
| #ifdef CONFIG_PPC_P7_NAP |
| BEGIN_FTR_SECTION |
| /* Running native on arch 2.06 or later, check if we are |
| * waking up from nap/sleep/winkle. |
| */ |
| mfspr r13,SPRN_SRR1 |
| rlwinm. r13,r13,47-31,30,31 |
| beq 9f |
| |
| cmpwi cr3,r13,2 |
| |
| /* |
| * Check if last bit of HSPGR0 is set. This indicates whether we are |
| * waking up from winkle. |
| */ |
| GET_PACA(r13) |
| clrldi r5,r13,63 |
| clrrdi r13,r13,1 |
| cmpwi cr4,r5,1 |
| mtspr SPRN_HSPRG0,r13 |
| |
| lbz r0,PACA_THREAD_IDLE_STATE(r13) |
| cmpwi cr2,r0,PNV_THREAD_NAP |
| bgt cr2,8f /* Either sleep or Winkle */ |
| |
| /* Waking up from nap should not cause hypervisor state loss */ |
| bgt cr3,. |
| |
| /* Waking up from nap */ |
| li r0,PNV_THREAD_RUNNING |
| stb r0,PACA_THREAD_IDLE_STATE(r13) /* Clear thread state */ |
| |
| #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE |
| li r0,KVM_HWTHREAD_IN_KERNEL |
| stb r0,HSTATE_HWTHREAD_STATE(r13) |
| /* Order setting hwthread_state vs. testing hwthread_req */ |
| sync |
| lbz r0,HSTATE_HWTHREAD_REQ(r13) |
| cmpwi r0,0 |
| beq 1f |
| b kvm_start_guest |
| 1: |
| #endif |
| |
| /* Return SRR1 from power7_nap() */ |
| mfspr r3,SPRN_SRR1 |
| beq cr3,2f |
| b power7_wakeup_noloss |
| 2: b power7_wakeup_loss |
| |
| /* Fast Sleep wakeup on PowerNV */ |
| 8: GET_PACA(r13) |
| b power7_wakeup_tb_loss |
| |
| 9: |
| END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) |
| #endif /* CONFIG_PPC_P7_NAP */ |
| EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common, EXC_STD, |
| NOTEST, 0x100) |
| |
| . = 0x200 |
| machine_check_pSeries_1: |
| /* This is moved out of line as it can be patched by FW, but |
| * some code path might still want to branch into the original |
| * vector |
| */ |
| SET_SCRATCH0(r13) /* save r13 */ |
| #ifdef CONFIG_PPC_P7_NAP |
| BEGIN_FTR_SECTION |
| /* Running native on arch 2.06 or later, check if we are |
| * waking up from nap. We only handle no state loss and |
| * supervisor state loss. We do -not- handle hypervisor |
| * state loss at this time. |
| */ |
| mfspr r13,SPRN_SRR1 |
| rlwinm. r13,r13,47-31,30,31 |
| OPT_GET_SPR(r13, SPRN_CFAR, CPU_FTR_CFAR) |
| beq 9f |
| |
| mfspr r13,SPRN_SRR1 |
| rlwinm. r13,r13,47-31,30,31 |
| /* waking up from powersave (nap) state */ |
| cmpwi cr1,r13,2 |
| /* Total loss of HV state is fatal. let's just stay stuck here */ |
| OPT_GET_SPR(r13, SPRN_CFAR, CPU_FTR_CFAR) |
| bgt cr1,. |
| 9: |
| OPT_SET_SPR(r13, SPRN_CFAR, CPU_FTR_CFAR) |
| END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) |
| #endif /* CONFIG_PPC_P7_NAP */ |
| EXCEPTION_PROLOG_0(PACA_EXMC) |
| BEGIN_FTR_SECTION |
| b machine_check_pSeries_early |
| FTR_SECTION_ELSE |
| b machine_check_pSeries_0 |
| ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE) |
| |
| . = 0x300 |
| .globl data_access_pSeries |
| data_access_pSeries: |
| SET_SCRATCH0(r13) |
| EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common, EXC_STD, |
| KVMTEST, 0x300) |
| |
| . = 0x380 |
| .globl data_access_slb_pSeries |
| data_access_slb_pSeries: |
| SET_SCRATCH0(r13) |
| EXCEPTION_PROLOG_0(PACA_EXSLB) |
| EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST, 0x380) |
| std r3,PACA_EXSLB+EX_R3(r13) |
| mfspr r3,SPRN_DAR |
| #ifdef __DISABLED__ |
| /* Keep that around for when we re-implement dynamic VSIDs */ |
| cmpdi r3,0 |
| bge slb_miss_user_pseries |
| #endif /* __DISABLED__ */ |
| mfspr r12,SPRN_SRR1 |
| #ifndef CONFIG_RELOCATABLE |
| b slb_miss_realmode |
| #else |
| /* |
| * We can't just use a direct branch to slb_miss_realmode |
| * because the distance from here to there depends on where |
| * the kernel ends up being put. |
| */ |
| mfctr r11 |
| ld r10,PACAKBASE(r13) |
| LOAD_HANDLER(r10, slb_miss_realmode) |
| mtctr r10 |
| bctr |
| #endif |
| |
| STD_EXCEPTION_PSERIES(0x400, instruction_access) |
| |
| . = 0x480 |
| .globl instruction_access_slb_pSeries |
| instruction_access_slb_pSeries: |
| SET_SCRATCH0(r13) |
| EXCEPTION_PROLOG_0(PACA_EXSLB) |
| EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST, 0x480) |
| std r3,PACA_EXSLB+EX_R3(r13) |
| mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ |
| #ifdef __DISABLED__ |
| /* Keep that around for when we re-implement dynamic VSIDs */ |
| cmpdi r3,0 |
| bge slb_miss_user_pseries |
| #endif /* __DISABLED__ */ |
| mfspr r12,SPRN_SRR1 |
| #ifndef CONFIG_RELOCATABLE |
| b slb_miss_realmode |
| #else |
| mfctr r11 |
| ld r10,PACAKBASE(r13) |
| LOAD_HANDLER(r10, slb_miss_realmode) |
| mtctr r10 |
| bctr |
| #endif |
| |
| /* We open code these as we can't have a ". = x" (even with |
| * x = "." within a feature section |
| */ |
| . = 0x500; |
| .globl hardware_interrupt_pSeries; |
| .globl hardware_interrupt_hv; |
| hardware_interrupt_pSeries: |
| hardware_interrupt_hv: |
| BEGIN_FTR_SECTION |
| _MASKABLE_EXCEPTION_PSERIES(0x502, hardware_interrupt, |
| EXC_HV, SOFTEN_TEST_HV) |
| KVM_HANDLER(PACA_EXGEN, EXC_HV, 0x502) |
| FTR_SECTION_ELSE |
| _MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt, |
| EXC_STD, SOFTEN_TEST_PR) |
| KVM_HANDLER(PACA_EXGEN, EXC_STD, 0x500) |
| ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) |
| |
| STD_EXCEPTION_PSERIES(0x600, alignment) |
| KVM_HANDLER(PACA_EXGEN, EXC_STD, 0x600) |
| |
| STD_EXCEPTION_PSERIES(0x700, program_check) |
| KVM_HANDLER(PACA_EXGEN, EXC_STD, 0x700) |
| |
| STD_EXCEPTION_PSERIES(0x800, fp_unavailable) |
| KVM_HANDLER(PACA_EXGEN, EXC_STD, 0x800) |
| |
| . = 0x900 |
| .globl decrementer_pSeries |
| decrementer_pSeries: |
| _MASKABLE_EXCEPTION_PSERIES(0x900, decrementer, EXC_STD, SOFTEN_TEST_PR) |
| |
| STD_EXCEPTION_HV(0x980, 0x982, hdecrementer) |
| |
| MASKABLE_EXCEPTION_PSERIES(0xa00, 0xa00, doorbell_super) |
| KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xa00) |
| |
| STD_EXCEPTION_PSERIES(0xb00, trap_0b) |
| KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xb00) |
| |
| . = 0xc00 |
| .globl system_call_pSeries |
| system_call_pSeries: |
| /* |
| * If CONFIG_KVM_BOOK3S_64_HANDLER is set, save the PPR (on systems |
| * that support it) before changing to HMT_MEDIUM. That allows the KVM |
| * code to save that value into the guest state (it is the guest's PPR |
| * value). Otherwise just change to HMT_MEDIUM as userspace has |
| * already saved the PPR. |
| */ |
| #ifdef CONFIG_KVM_BOOK3S_64_HANDLER |
| SET_SCRATCH0(r13) |
| GET_PACA(r13) |
| std r9,PACA_EXGEN+EX_R9(r13) |
| OPT_GET_SPR(r9, SPRN_PPR, CPU_FTR_HAS_PPR); |
| HMT_MEDIUM; |
| std r10,PACA_EXGEN+EX_R10(r13) |
| OPT_SAVE_REG_TO_PACA(PACA_EXGEN+EX_PPR, r9, CPU_FTR_HAS_PPR); |
| mfcr r9 |
| KVMTEST(0xc00) |
| GET_SCRATCH0(r13) |
| #else |
| HMT_MEDIUM; |
| #endif |
| SYSCALL_PSERIES_1 |
| SYSCALL_PSERIES_2_RFID |
| SYSCALL_PSERIES_3 |
| KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xc00) |
| |
| STD_EXCEPTION_PSERIES(0xd00, single_step) |
| KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xd00) |
| |
| /* At 0xe??? we have a bunch of hypervisor exceptions, we branch |
| * out of line to handle them |
| */ |
| . = 0xe00 |
| hv_data_storage_trampoline: |
| SET_SCRATCH0(r13) |
| EXCEPTION_PROLOG_0(PACA_EXGEN) |
| b h_data_storage_hv |
| |
| . = 0xe20 |
| hv_instr_storage_trampoline: |
| SET_SCRATCH0(r13) |
| EXCEPTION_PROLOG_0(PACA_EXGEN) |
| b h_instr_storage_hv |
| |
| . = 0xe40 |
| emulation_assist_trampoline: |
| SET_SCRATCH0(r13) |
| EXCEPTION_PROLOG_0(PACA_EXGEN) |
| b emulation_assist_hv |
| |
| . = 0xe60 |
| hv_exception_trampoline: |
| SET_SCRATCH0(r13) |
| EXCEPTION_PROLOG_0(PACA_EXGEN) |
| b hmi_exception_early |
| |
| . = 0xe80 |
| hv_doorbell_trampoline: |
| SET_SCRATCH0(r13) |
| EXCEPTION_PROLOG_0(PACA_EXGEN) |
| b h_doorbell_hv |
| |
| /* We need to deal with the Altivec unavailable exception |
| * here which is at 0xf20, thus in the middle of the |
| * prolog code of the PerformanceMonitor one. A little |
| * trickery is thus necessary |
| */ |
| . = 0xf00 |
| performance_monitor_pseries_trampoline: |
| SET_SCRATCH0(r13) |
| EXCEPTION_PROLOG_0(PACA_EXGEN) |
| b performance_monitor_pSeries |
| |
| . = 0xf20 |
| altivec_unavailable_pseries_trampoline: |
| SET_SCRATCH0(r13) |
| EXCEPTION_PROLOG_0(PACA_EXGEN) |
| b altivec_unavailable_pSeries |
| |
| . = 0xf40 |
| vsx_unavailable_pseries_trampoline: |
| SET_SCRATCH0(r13) |
| EXCEPTION_PROLOG_0(PACA_EXGEN) |
| b vsx_unavailable_pSeries |
| |
| . = 0xf60 |
| facility_unavailable_trampoline: |
| SET_SCRATCH0(r13) |
| EXCEPTION_PROLOG_0(PACA_EXGEN) |
| b facility_unavailable_pSeries |
| |
| . = 0xf80 |
| hv_facility_unavailable_trampoline: |
| SET_SCRATCH0(r13) |
| EXCEPTION_PROLOG_0(PACA_EXGEN) |
| b facility_unavailable_hv |
| |
| #ifdef CONFIG_CBE_RAS |
| STD_EXCEPTION_HV(0x1200, 0x1202, cbe_system_error) |
| KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1202) |
| #endif /* CONFIG_CBE_RAS */ |
| |
| STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint) |
| KVM_HANDLER_SKIP(PACA_EXGEN, EXC_STD, 0x1300) |
| |
| . = 0x1500 |
| .global denorm_exception_hv |
| denorm_exception_hv: |
| mtspr SPRN_SPRG_HSCRATCH0,r13 |
| EXCEPTION_PROLOG_0(PACA_EXGEN) |
| EXCEPTION_PROLOG_1(PACA_EXGEN, NOTEST, 0x1500) |
| |
| #ifdef CONFIG_PPC_DENORMALISATION |
| mfspr r10,SPRN_HSRR1 |
| mfspr r11,SPRN_HSRR0 /* save HSRR0 */ |
| andis. r10,r10,(HSRR1_DENORM)@h /* denorm? */ |
| addi r11,r11,-4 /* HSRR0 is next instruction */ |
| bne+ denorm_assist |
| #endif |
| |
| KVMTEST(0x1500) |
| EXCEPTION_PROLOG_PSERIES_1(denorm_common, EXC_HV) |
| KVM_HANDLER_SKIP(PACA_EXGEN, EXC_STD, 0x1500) |
| |
| #ifdef CONFIG_CBE_RAS |
| STD_EXCEPTION_HV(0x1600, 0x1602, cbe_maintenance) |
| KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1602) |
| #endif /* CONFIG_CBE_RAS */ |
| |
| STD_EXCEPTION_PSERIES(0x1700, altivec_assist) |
| KVM_HANDLER(PACA_EXGEN, EXC_STD, 0x1700) |
| |
| #ifdef CONFIG_CBE_RAS |
| STD_EXCEPTION_HV(0x1800, 0x1802, cbe_thermal) |
| KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1802) |
| #else |
| . = 0x1800 |
| #endif /* CONFIG_CBE_RAS */ |
| |
| |
| /*** Out of line interrupts support ***/ |
| |
| .align 7 |
| /* moved from 0x200 */ |
| machine_check_pSeries_early: |
| BEGIN_FTR_SECTION |
| EXCEPTION_PROLOG_1(PACA_EXMC, NOTEST, 0x200) |
| /* |
| * Register contents: |
| * R13 = PACA |
| * R9 = CR |
| * Original R9 to R13 is saved on PACA_EXMC |
| * |
| * Switch to mc_emergency stack and handle re-entrancy (we limit |
| * the nested MCE upto level 4 to avoid stack overflow). |
| * Save MCE registers srr1, srr0, dar and dsisr and then set ME=1 |
| * |
| * We use paca->in_mce to check whether this is the first entry or |
| * nested machine check. We increment paca->in_mce to track nested |
| * machine checks. |
| * |
| * If this is the first entry then set stack pointer to |
| * paca->mc_emergency_sp, otherwise r1 is already pointing to |
| * stack frame on mc_emergency stack. |
| * |
| * NOTE: We are here with MSR_ME=0 (off), which means we risk a |
| * checkstop if we get another machine check exception before we do |
| * rfid with MSR_ME=1. |
| */ |
| mr r11,r1 /* Save r1 */ |
| lhz r10,PACA_IN_MCE(r13) |
| cmpwi r10,0 /* Are we in nested machine check */ |
| bne 0f /* Yes, we are. */ |
| /* First machine check entry */ |
| ld r1,PACAMCEMERGSP(r13) /* Use MC emergency stack */ |
| 0: subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */ |
| addi r10,r10,1 /* increment paca->in_mce */ |
| sth r10,PACA_IN_MCE(r13) |
| /* Limit nested MCE to level 4 to avoid stack overflow */ |
| cmpwi r10,4 |
| bgt 2f /* Check if we hit limit of 4 */ |
| std r11,GPR1(r1) /* Save r1 on the stack. */ |
| std r11,0(r1) /* make stack chain pointer */ |
| mfspr r11,SPRN_SRR0 /* Save SRR0 */ |
| std r11,_NIP(r1) |
| mfspr r11,SPRN_SRR1 /* Save SRR1 */ |
| std r11,_MSR(r1) |
| mfspr r11,SPRN_DAR /* Save DAR */ |
| std r11,_DAR(r1) |
| mfspr r11,SPRN_DSISR /* Save DSISR */ |
| std r11,_DSISR(r1) |
| std r9,_CCR(r1) /* Save CR in stackframe */ |
| /* Save r9 through r13 from EXMC save area to stack frame. */ |
| EXCEPTION_PROLOG_COMMON_2(PACA_EXMC) |
| mfmsr r11 /* get MSR value */ |
| ori r11,r11,MSR_ME /* turn on ME bit */ |
| ori r11,r11,MSR_RI /* turn on RI bit */ |
| ld r12,PACAKBASE(r13) /* get high part of &label */ |
| LOAD_HANDLER(r12, machine_check_handle_early) |
| 1: mtspr SPRN_SRR0,r12 |
| mtspr SPRN_SRR1,r11 |
| rfid |
| b . /* prevent speculative execution */ |
| 2: |
| /* Stack overflow. Stay on emergency stack and panic. |
| * Keep the ME bit off while panic-ing, so that if we hit |
| * another machine check we checkstop. |
| */ |
| addi r1,r1,INT_FRAME_SIZE /* go back to previous stack frame */ |
| ld r11,PACAKMSR(r13) |
| ld r12,PACAKBASE(r13) |
| LOAD_HANDLER(r12, unrecover_mce) |
| li r10,MSR_ME |
| andc r11,r11,r10 /* Turn off MSR_ME */ |
| b 1b |
| b . /* prevent speculative execution */ |
| END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) |
| |
| machine_check_pSeries: |
| .globl machine_check_fwnmi |
| machine_check_fwnmi: |
| SET_SCRATCH0(r13) /* save r13 */ |
| EXCEPTION_PROLOG_0(PACA_EXMC) |
| machine_check_pSeries_0: |
| EXCEPTION_PROLOG_1(PACA_EXMC, KVMTEST, 0x200) |
| EXCEPTION_PROLOG_PSERIES_1(machine_check_common, EXC_STD) |
| KVM_HANDLER_SKIP(PACA_EXMC, EXC_STD, 0x200) |
| KVM_HANDLER_SKIP(PACA_EXGEN, EXC_STD, 0x300) |
| KVM_HANDLER_SKIP(PACA_EXSLB, EXC_STD, 0x380) |
| KVM_HANDLER(PACA_EXGEN, EXC_STD, 0x400) |
| KVM_HANDLER(PACA_EXSLB, EXC_STD, 0x480) |
| KVM_HANDLER(PACA_EXGEN, EXC_STD, 0x900) |
| KVM_HANDLER(PACA_EXGEN, EXC_HV, 0x982) |
| |
| #ifdef CONFIG_PPC_DENORMALISATION |
| denorm_assist: |
| BEGIN_FTR_SECTION |
| /* |
| * To denormalise we need to move a copy of the register to itself. |
| * For POWER6 do that here for all FP regs. |
| */ |
| mfmsr r10 |
| ori r10,r10,(MSR_FP|MSR_FE0|MSR_FE1) |
| xori r10,r10,(MSR_FE0|MSR_FE1) |
| mtmsrd r10 |
| sync |
| |
| #define FMR2(n) fmr (n), (n) ; fmr n+1, n+1 |
| #define FMR4(n) FMR2(n) ; FMR2(n+2) |
| #define FMR8(n) FMR4(n) ; FMR4(n+4) |
| #define FMR16(n) FMR8(n) ; FMR8(n+8) |
| #define FMR32(n) FMR16(n) ; FMR16(n+16) |
| FMR32(0) |
| |
| FTR_SECTION_ELSE |
| /* |
| * To denormalise we need to move a copy of the register to itself. |
| * For POWER7 do that here for the first 32 VSX registers only. |
| */ |
| mfmsr r10 |
| oris r10,r10,MSR_VSX@h |
| mtmsrd r10 |
| sync |
| |
| #define XVCPSGNDP2(n) XVCPSGNDP(n,n,n) ; XVCPSGNDP(n+1,n+1,n+1) |
| #define XVCPSGNDP4(n) XVCPSGNDP2(n) ; XVCPSGNDP2(n+2) |
| #define XVCPSGNDP8(n) XVCPSGNDP4(n) ; XVCPSGNDP4(n+4) |
| #define XVCPSGNDP16(n) XVCPSGNDP8(n) ; XVCPSGNDP8(n+8) |
| #define XVCPSGNDP32(n) XVCPSGNDP16(n) ; XVCPSGNDP16(n+16) |
| XVCPSGNDP32(0) |
| |
| ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_206) |
| |
| BEGIN_FTR_SECTION |
| b denorm_done |
| END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S) |
| /* |
| * To denormalise we need to move a copy of the register to itself. |
| * For POWER8 we need to do that for all 64 VSX registers |
| */ |
| XVCPSGNDP32(32) |
| denorm_done: |
| mtspr SPRN_HSRR0,r11 |
| mtcrf 0x80,r9 |
| ld r9,PACA_EXGEN+EX_R9(r13) |
| RESTORE_PPR_PACA(PACA_EXGEN, r10) |
| BEGIN_FTR_SECTION |
| ld r10,PACA_EXGEN+EX_CFAR(r13) |
| mtspr SPRN_CFAR,r10 |
| END_FTR_SECTION_IFSET(CPU_FTR_CFAR) |
| ld r10,PACA_EXGEN+EX_R10(r13) |
| ld r11,PACA_EXGEN+EX_R11(r13) |
| ld r12,PACA_EXGEN+EX_R12(r13) |
| ld r13,PACA_EXGEN+EX_R13(r13) |
| HRFID |
| b . |
| #endif |
| |
| .align 7 |
| /* moved from 0xe00 */ |
| STD_EXCEPTION_HV_OOL(0xe02, h_data_storage) |
| KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0xe02) |
| STD_EXCEPTION_HV_OOL(0xe22, h_instr_storage) |
| KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe22) |
| STD_EXCEPTION_HV_OOL(0xe42, emulation_assist) |
| KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe42) |
| MASKABLE_EXCEPTION_HV_OOL(0xe62, hmi_exception) |
| KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe62) |
| |
| MASKABLE_EXCEPTION_HV_OOL(0xe82, h_doorbell) |
| KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe82) |
| |
| /* moved from 0xf00 */ |
| STD_EXCEPTION_PSERIES_OOL(0xf00, performance_monitor) |
| KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xf00) |
| STD_EXCEPTION_PSERIES_OOL(0xf20, altivec_unavailable) |
| KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xf20) |
| STD_EXCEPTION_PSERIES_OOL(0xf40, vsx_unavailable) |
| KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xf40) |
| STD_EXCEPTION_PSERIES_OOL(0xf60, facility_unavailable) |
| KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xf60) |
| STD_EXCEPTION_HV_OOL(0xf82, facility_unavailable) |
| KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xf82) |
| |
| /* |
| * An interrupt came in while soft-disabled. We set paca->irq_happened, then: |
| * - If it was a decrementer interrupt, we bump the dec to max and and return. |
| * - If it was a doorbell we return immediately since doorbells are edge |
| * triggered and won't automatically refire. |
| * - If it was a HMI we return immediately since we handled it in realmode |
| * and it won't refire. |
| * - else we hard disable and return. |
| * This is called with r10 containing the value to OR to the paca field. |
| */ |
| #define MASKED_INTERRUPT(_H) \ |
| masked_##_H##interrupt: \ |
| std r11,PACA_EXGEN+EX_R11(r13); \ |
| lbz r11,PACAIRQHAPPENED(r13); \ |
| or r11,r11,r10; \ |
| stb r11,PACAIRQHAPPENED(r13); \ |
| cmpwi r10,PACA_IRQ_DEC; \ |
| bne 1f; \ |
| lis r10,0x7fff; \ |
| ori r10,r10,0xffff; \ |
| mtspr SPRN_DEC,r10; \ |
| b 2f; \ |
| 1: cmpwi r10,PACA_IRQ_DBELL; \ |
| beq 2f; \ |
| cmpwi r10,PACA_IRQ_HMI; \ |
| beq 2f; \ |
| mfspr r10,SPRN_##_H##SRR1; \ |
| rldicl r10,r10,48,1; /* clear MSR_EE */ \ |
| rotldi r10,r10,16; \ |
| mtspr SPRN_##_H##SRR1,r10; \ |
| 2: mtcrf 0x80,r9; \ |
| ld r9,PACA_EXGEN+EX_R9(r13); \ |
| ld r10,PACA_EXGEN+EX_R10(r13); \ |
| ld r11,PACA_EXGEN+EX_R11(r13); \ |
| GET_SCRATCH0(r13); \ |
| ##_H##rfid; \ |
| b . |
| |
| MASKED_INTERRUPT() |
| MASKED_INTERRUPT(H) |
| |
| /* |
| * Called from arch_local_irq_enable when an interrupt needs |
| * to be resent. r3 contains 0x500, 0x900, 0xa00 or 0xe80 to indicate |
| * which kind of interrupt. MSR:EE is already off. We generate a |
| * stackframe like if a real interrupt had happened. |
| * |
| * Note: While MSR:EE is off, we need to make sure that _MSR |
| * in the generated frame has EE set to 1 or the exception |
| * handler will not properly re-enable them. |
| */ |
| _GLOBAL(__replay_interrupt) |
| /* We are going to jump to the exception common code which |
| * will retrieve various register values from the PACA which |
| * we don't give a damn about, so we don't bother storing them. |
| */ |
| mfmsr r12 |
| mflr r11 |
| mfcr r9 |
| ori r12,r12,MSR_EE |
| cmpwi r3,0x900 |
| beq decrementer_common |
| cmpwi r3,0x500 |
| beq hardware_interrupt_common |
| BEGIN_FTR_SECTION |
| cmpwi r3,0xe80 |
| beq h_doorbell_common |
| FTR_SECTION_ELSE |
| cmpwi r3,0xa00 |
| beq doorbell_super_common |
| ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE) |
| blr |
| |
| #ifdef CONFIG_PPC_PSERIES |
| /* |
| * Vectors for the FWNMI option. Share common code. |
| */ |
| .globl system_reset_fwnmi |
| .align 7 |
| system_reset_fwnmi: |
| SET_SCRATCH0(r13) /* save r13 */ |
| EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common, EXC_STD, |
| NOTEST, 0x100) |
| |
| #endif /* CONFIG_PPC_PSERIES */ |
| |
| #ifdef __DISABLED__ |
| /* |
| * This is used for when the SLB miss handler has to go virtual, |
| * which doesn't happen for now anymore but will once we re-implement |
| * dynamic VSIDs for shared page tables |
| */ |
| slb_miss_user_pseries: |
| std r10,PACA_EXGEN+EX_R10(r13) |
| std r11,PACA_EXGEN+EX_R11(r13) |
| std r12,PACA_EXGEN+EX_R12(r13) |
| GET_SCRATCH0(r10) |
| ld r11,PACA_EXSLB+EX_R9(r13) |
| ld r12,PACA_EXSLB+EX_R3(r13) |
| std r10,PACA_EXGEN+EX_R13(r13) |
| std r11,PACA_EXGEN+EX_R9(r13) |
| std r12,PACA_EXGEN+EX_R3(r13) |
| clrrdi r12,r13,32 |
| mfmsr r10 |
| mfspr r11,SRR0 /* save SRR0 */ |
| ori r12,r12,slb_miss_user_common@l /* virt addr of handler */ |
| ori r10,r10,MSR_IR|MSR_DR|MSR_RI |
| mtspr SRR0,r12 |
| mfspr r12,SRR1 /* and SRR1 */ |
| mtspr SRR1,r10 |
| rfid |
| b . /* prevent spec. execution */ |
| #endif /* __DISABLED__ */ |
| |
| #ifdef CONFIG_KVM_BOOK3S_64_HANDLER |
| kvmppc_skip_interrupt: |
| /* |
| * Here all GPRs are unchanged from when the interrupt happened |
| * except for r13, which is saved in SPRG_SCRATCH0. |
| */ |
| mfspr r13, SPRN_SRR0 |
| addi r13, r13, 4 |
| mtspr SPRN_SRR0, r13 |
| GET_SCRATCH0(r13) |
| rfid |
| b . |
| |
| kvmppc_skip_Hinterrupt: |
| /* |
| * Here all GPRs are unchanged from when the interrupt happened |
| * except for r13, which is saved in SPRG_SCRATCH0. |
| */ |
| mfspr r13, SPRN_HSRR0 |
| addi r13, r13, 4 |
| mtspr SPRN_HSRR0, r13 |
| GET_SCRATCH0(r13) |
| hrfid |
| b . |
| #endif |
| |
| /* |
| * Code from here down to __end_handlers is invoked from the |
| * exception prologs above. Because the prologs assemble the |
| * addresses of these handlers using the LOAD_HANDLER macro, |
| * which uses an ori instruction, these handlers must be in |
| * the first 64k of the kernel image. |
| */ |
| |
| /*** Common interrupt handlers ***/ |
| |
| STD_EXCEPTION_COMMON(0x100, system_reset, system_reset_exception) |
| |
| STD_EXCEPTION_COMMON_ASYNC(0x500, hardware_interrupt, do_IRQ) |
| STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, timer_interrupt) |
| STD_EXCEPTION_COMMON(0x980, hdecrementer, hdec_interrupt) |
| #ifdef CONFIG_PPC_DOORBELL |
| STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, doorbell_exception) |
| #else |
| STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, unknown_exception) |
| #endif |
| STD_EXCEPTION_COMMON(0xb00, trap_0b, unknown_exception) |
| STD_EXCEPTION_COMMON(0xd00, single_step, single_step_exception) |
| STD_EXCEPTION_COMMON(0xe00, trap_0e, unknown_exception) |
| STD_EXCEPTION_COMMON(0xe40, emulation_assist, emulation_assist_interrupt) |
| STD_EXCEPTION_COMMON_ASYNC(0xe60, hmi_exception, handle_hmi_exception) |
| #ifdef CONFIG_PPC_DOORBELL |
| STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, doorbell_exception) |
| #else |
| STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, unknown_exception) |
| #endif |
| STD_EXCEPTION_COMMON_ASYNC(0xf00, performance_monitor, performance_monitor_exception) |
| STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, instruction_breakpoint_exception) |
| STD_EXCEPTION_COMMON(0x1502, denorm, unknown_exception) |
| #ifdef CONFIG_ALTIVEC |
| STD_EXCEPTION_COMMON(0x1700, altivec_assist, altivec_assist_exception) |
| #else |
| STD_EXCEPTION_COMMON(0x1700, altivec_assist, unknown_exception) |
| #endif |
| #ifdef CONFIG_CBE_RAS |
| STD_EXCEPTION_COMMON(0x1200, cbe_system_error, cbe_system_error_exception) |
| STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, cbe_maintenance_exception) |
| STD_EXCEPTION_COMMON(0x1800, cbe_thermal, cbe_thermal_exception) |
| #endif /* CONFIG_CBE_RAS */ |
| |
| /* |
| * Relocation-on interrupts: A subset of the interrupts can be delivered |
| * with IR=1/DR=1, if AIL==2 and MSR.HV won't be changed by delivering |
| * it. Addresses are the same as the original interrupt addresses, but |
| * offset by 0xc000000000004000. |
| * It's impossible to receive interrupts below 0x300 via this mechanism. |
| * KVM: None of these traps are from the guest ; anything that escalated |
| * to HV=1 from HV=0 is delivered via real mode handlers. |
| */ |
| |
| /* |
| * This uses the standard macro, since the original 0x300 vector |
| * only has extra guff for STAB-based processors -- which never |
| * come here. |
| */ |
| STD_RELON_EXCEPTION_PSERIES(0x4300, 0x300, data_access) |
| . = 0x4380 |
| .globl data_access_slb_relon_pSeries |
| data_access_slb_relon_pSeries: |
| SET_SCRATCH0(r13) |
| EXCEPTION_PROLOG_0(PACA_EXSLB) |
| EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x380) |
| std r3,PACA_EXSLB+EX_R3(r13) |
| mfspr r3,SPRN_DAR |
| mfspr r12,SPRN_SRR1 |
| #ifndef CONFIG_RELOCATABLE |
| b slb_miss_realmode |
| #else |
| /* |
| * We can't just use a direct branch to slb_miss_realmode |
| * because the distance from here to there depends on where |
| * the kernel ends up being put. |
| */ |
| mfctr r11 |
| ld r10,PACAKBASE(r13) |
| LOAD_HANDLER(r10, slb_miss_realmode) |
| mtctr r10 |
| bctr |
| #endif |
| |
| STD_RELON_EXCEPTION_PSERIES(0x4400, 0x400, instruction_access) |
| . = 0x4480 |
| .globl instruction_access_slb_relon_pSeries |
| instruction_access_slb_relon_pSeries: |
| SET_SCRATCH0(r13) |
| EXCEPTION_PROLOG_0(PACA_EXSLB) |
| EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x480) |
| std r3,PACA_EXSLB+EX_R3(r13) |
| mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ |
| mfspr r12,SPRN_SRR1 |
| #ifndef CONFIG_RELOCATABLE |
| b slb_miss_realmode |
| #else |
| mfctr r11 |
| ld r10,PACAKBASE(r13) |
| LOAD_HANDLER(r10, slb_miss_realmode) |
| mtctr r10 |
| bctr |
| #endif |
| |
| . = 0x4500 |
| .globl hardware_interrupt_relon_pSeries; |
| .globl hardware_interrupt_relon_hv; |
| hardware_interrupt_relon_pSeries: |
| hardware_interrupt_relon_hv: |
| BEGIN_FTR_SECTION |
| _MASKABLE_RELON_EXCEPTION_PSERIES(0x502, hardware_interrupt, EXC_HV, SOFTEN_TEST_HV) |
| FTR_SECTION_ELSE |
| _MASKABLE_RELON_EXCEPTION_PSERIES(0x500, hardware_interrupt, EXC_STD, SOFTEN_TEST_PR) |
| ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE) |
| STD_RELON_EXCEPTION_PSERIES(0x4600, 0x600, alignment) |
| STD_RELON_EXCEPTION_PSERIES(0x4700, 0x700, program_check) |
| STD_RELON_EXCEPTION_PSERIES(0x4800, 0x800, fp_unavailable) |
| MASKABLE_RELON_EXCEPTION_PSERIES(0x4900, 0x900, decrementer) |
| STD_RELON_EXCEPTION_HV(0x4980, 0x982, hdecrementer) |
| MASKABLE_RELON_EXCEPTION_PSERIES(0x4a00, 0xa00, doorbell_super) |
| STD_RELON_EXCEPTION_PSERIES(0x4b00, 0xb00, trap_0b) |
| |
| . = 0x4c00 |
| .globl system_call_relon_pSeries |
| system_call_relon_pSeries: |
| HMT_MEDIUM |
| SYSCALL_PSERIES_1 |
| SYSCALL_PSERIES_2_DIRECT |
| SYSCALL_PSERIES_3 |
| |
| STD_RELON_EXCEPTION_PSERIES(0x4d00, 0xd00, single_step) |
| |
| . = 0x4e00 |
| b . /* Can't happen, see v2.07 Book III-S section 6.5 */ |
| |
| . = 0x4e20 |
| b . /* Can't happen, see v2.07 Book III-S section 6.5 */ |
| |
| . = 0x4e40 |
| emulation_assist_relon_trampoline: |
| SET_SCRATCH0(r13) |
| EXCEPTION_PROLOG_0(PACA_EXGEN) |
| b emulation_assist_relon_hv |
| |
| . = 0x4e60 |
| b . /* Can't happen, see v2.07 Book III-S section 6.5 */ |
| |
| . = 0x4e80 |
| h_doorbell_relon_trampoline: |
| SET_SCRATCH0(r13) |
| EXCEPTION_PROLOG_0(PACA_EXGEN) |
| b h_doorbell_relon_hv |
| |
| . = 0x4f00 |
| performance_monitor_relon_pseries_trampoline: |
| SET_SCRATCH0(r13) |
| EXCEPTION_PROLOG_0(PACA_EXGEN) |
| b performance_monitor_relon_pSeries |
| |
| . = 0x4f20 |
| altivec_unavailable_relon_pseries_trampoline: |
| SET_SCRATCH0(r13) |
| EXCEPTION_PROLOG_0(PACA_EXGEN) |
| b altivec_unavailable_relon_pSeries |
| |
| . = 0x4f40 |
| vsx_unavailable_relon_pseries_trampoline: |
| SET_SCRATCH0(r13) |
| EXCEPTION_PROLOG_0(PACA_EXGEN) |
| b vsx_unavailable_relon_pSeries |
| |
| . = 0x4f60 |
| facility_unavailable_relon_trampoline: |
| SET_SCRATCH0(r13) |
| EXCEPTION_PROLOG_0(PACA_EXGEN) |
| b facility_unavailable_relon_pSeries |
| |
| . = 0x4f80 |
| hv_facility_unavailable_relon_trampoline: |
| SET_SCRATCH0(r13) |
| EXCEPTION_PROLOG_0(PACA_EXGEN) |
| b hv_facility_unavailable_relon_hv |
| |
| STD_RELON_EXCEPTION_PSERIES(0x5300, 0x1300, instruction_breakpoint) |
| #ifdef CONFIG_PPC_DENORMALISATION |
| . = 0x5500 |
| b denorm_exception_hv |
| #endif |
| STD_RELON_EXCEPTION_PSERIES(0x5700, 0x1700, altivec_assist) |
| |
| /* Other future vectors */ |
| .align 7 |
| .globl __end_interrupts |
| __end_interrupts: |
| |
| .align 7 |
| system_call_entry: |
| b system_call_common |
| |
| ppc64_runlatch_on_trampoline: |
| b __ppc64_runlatch_on |
| |
| /* |
| * Here r13 points to the paca, r9 contains the saved CR, |
| * SRR0 and SRR1 are saved in r11 and r12, |
| * r9 - r13 are saved in paca->exgen. |
| */ |
| .align 7 |
| .globl data_access_common |
| data_access_common: |
| mfspr r10,SPRN_DAR |
| std r10,PACA_EXGEN+EX_DAR(r13) |
| mfspr r10,SPRN_DSISR |
| stw r10,PACA_EXGEN+EX_DSISR(r13) |
| EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN) |
| RECONCILE_IRQ_STATE(r10, r11) |
| ld r12,_MSR(r1) |
| ld r3,PACA_EXGEN+EX_DAR(r13) |
| lwz r4,PACA_EXGEN+EX_DSISR(r13) |
| li r5,0x300 |
| b do_hash_page /* Try to handle as hpte fault */ |
| |
| .align 7 |
| .globl h_data_storage_common |
| h_data_storage_common: |
| mfspr r10,SPRN_HDAR |
| std r10,PACA_EXGEN+EX_DAR(r13) |
| mfspr r10,SPRN_HDSISR |
| stw r10,PACA_EXGEN+EX_DSISR(r13) |
| EXCEPTION_PROLOG_COMMON(0xe00, PACA_EXGEN) |
| bl save_nvgprs |
| RECONCILE_IRQ_STATE(r10, r11) |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl unknown_exception |
| b ret_from_except |
| |
| .align 7 |
| .globl instruction_access_common |
| instruction_access_common: |
| EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN) |
| RECONCILE_IRQ_STATE(r10, r11) |
| ld r12,_MSR(r1) |
| ld r3,_NIP(r1) |
| andis. r4,r12,0x5820 |
| li r5,0x400 |
| b do_hash_page /* Try to handle as hpte fault */ |
| |
| STD_EXCEPTION_COMMON(0xe20, h_instr_storage, unknown_exception) |
| |
| /* |
| * Here is the common SLB miss user that is used when going to virtual |
| * mode for SLB misses, that is currently not used |
| */ |
| #ifdef __DISABLED__ |
| .align 7 |
| .globl slb_miss_user_common |
| slb_miss_user_common: |
| mflr r10 |
| std r3,PACA_EXGEN+EX_DAR(r13) |
| stw r9,PACA_EXGEN+EX_CCR(r13) |
| std r10,PACA_EXGEN+EX_LR(r13) |
| std r11,PACA_EXGEN+EX_SRR0(r13) |
| bl slb_allocate_user |
| |
| ld r10,PACA_EXGEN+EX_LR(r13) |
| ld r3,PACA_EXGEN+EX_R3(r13) |
| lwz r9,PACA_EXGEN+EX_CCR(r13) |
| ld r11,PACA_EXGEN+EX_SRR0(r13) |
| mtlr r10 |
| beq- slb_miss_fault |
| |
| andi. r10,r12,MSR_RI /* check for unrecoverable exception */ |
| beq- unrecov_user_slb |
| mfmsr r10 |
| |
| .machine push |
| .machine "power4" |
| mtcrf 0x80,r9 |
| .machine pop |
| |
| clrrdi r10,r10,2 /* clear RI before setting SRR0/1 */ |
| mtmsrd r10,1 |
| |
| mtspr SRR0,r11 |
| mtspr SRR1,r12 |
| |
| ld r9,PACA_EXGEN+EX_R9(r13) |
| ld r10,PACA_EXGEN+EX_R10(r13) |
| ld r11,PACA_EXGEN+EX_R11(r13) |
| ld r12,PACA_EXGEN+EX_R12(r13) |
| ld r13,PACA_EXGEN+EX_R13(r13) |
| rfid |
| b . |
| |
| slb_miss_fault: |
| EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN) |
| ld r4,PACA_EXGEN+EX_DAR(r13) |
| li r5,0 |
| std r4,_DAR(r1) |
| std r5,_DSISR(r1) |
| b handle_page_fault |
| |
| unrecov_user_slb: |
| EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN) |
| RECONCILE_IRQ_STATE(r10, r11) |
| bl save_nvgprs |
| 1: addi r3,r1,STACK_FRAME_OVERHEAD |
| bl unrecoverable_exception |
| b 1b |
| |
| #endif /* __DISABLED__ */ |
| |
| |
| /* |
| * Machine check is different because we use a different |
| * save area: PACA_EXMC instead of PACA_EXGEN. |
| */ |
| .align 7 |
| .globl machine_check_common |
| machine_check_common: |
| |
| mfspr r10,SPRN_DAR |
| std r10,PACA_EXGEN+EX_DAR(r13) |
| mfspr r10,SPRN_DSISR |
| stw r10,PACA_EXGEN+EX_DSISR(r13) |
| EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC) |
| FINISH_NAP |
| RECONCILE_IRQ_STATE(r10, r11) |
| ld r3,PACA_EXGEN+EX_DAR(r13) |
| lwz r4,PACA_EXGEN+EX_DSISR(r13) |
| std r3,_DAR(r1) |
| std r4,_DSISR(r1) |
| bl save_nvgprs |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl machine_check_exception |
| b ret_from_except |
| |
| .align 7 |
| .globl alignment_common |
| alignment_common: |
| mfspr r10,SPRN_DAR |
| std r10,PACA_EXGEN+EX_DAR(r13) |
| mfspr r10,SPRN_DSISR |
| stw r10,PACA_EXGEN+EX_DSISR(r13) |
| EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN) |
| ld r3,PACA_EXGEN+EX_DAR(r13) |
| lwz r4,PACA_EXGEN+EX_DSISR(r13) |
| std r3,_DAR(r1) |
| std r4,_DSISR(r1) |
| bl save_nvgprs |
| RECONCILE_IRQ_STATE(r10, r11) |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl alignment_exception |
| b ret_from_except |
| |
| .align 7 |
| .globl program_check_common |
| program_check_common: |
| EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN) |
| bl save_nvgprs |
| RECONCILE_IRQ_STATE(r10, r11) |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl program_check_exception |
| b ret_from_except |
| |
| .align 7 |
| .globl fp_unavailable_common |
| fp_unavailable_common: |
| EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN) |
| bne 1f /* if from user, just load it up */ |
| bl save_nvgprs |
| RECONCILE_IRQ_STATE(r10, r11) |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl kernel_fp_unavailable_exception |
| BUG_OPCODE |
| 1: |
| #ifdef CONFIG_PPC_TRANSACTIONAL_MEM |
| BEGIN_FTR_SECTION |
| /* Test if 2 TM state bits are zero. If non-zero (ie. userspace was in |
| * transaction), go do TM stuff |
| */ |
| rldicl. r0, r12, (64-MSR_TS_LG), (64-2) |
| bne- 2f |
| END_FTR_SECTION_IFSET(CPU_FTR_TM) |
| #endif |
| bl load_up_fpu |
| b fast_exception_return |
| #ifdef CONFIG_PPC_TRANSACTIONAL_MEM |
| 2: /* User process was in a transaction */ |
| bl save_nvgprs |
| RECONCILE_IRQ_STATE(r10, r11) |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl fp_unavailable_tm |
| b ret_from_except |
| #endif |
| .align 7 |
| .globl altivec_unavailable_common |
| altivec_unavailable_common: |
| EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN) |
| #ifdef CONFIG_ALTIVEC |
| BEGIN_FTR_SECTION |
| beq 1f |
| #ifdef CONFIG_PPC_TRANSACTIONAL_MEM |
| BEGIN_FTR_SECTION_NESTED(69) |
| /* Test if 2 TM state bits are zero. If non-zero (ie. userspace was in |
| * transaction), go do TM stuff |
| */ |
| rldicl. r0, r12, (64-MSR_TS_LG), (64-2) |
| bne- 2f |
| END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69) |
| #endif |
| bl load_up_altivec |
| b fast_exception_return |
| #ifdef CONFIG_PPC_TRANSACTIONAL_MEM |
| 2: /* User process was in a transaction */ |
| bl save_nvgprs |
| RECONCILE_IRQ_STATE(r10, r11) |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl altivec_unavailable_tm |
| b ret_from_except |
| #endif |
| 1: |
| END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) |
| #endif |
| bl save_nvgprs |
| RECONCILE_IRQ_STATE(r10, r11) |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl altivec_unavailable_exception |
| b ret_from_except |
| |
| .align 7 |
| .globl vsx_unavailable_common |
| vsx_unavailable_common: |
| EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN) |
| #ifdef CONFIG_VSX |
| BEGIN_FTR_SECTION |
| beq 1f |
| #ifdef CONFIG_PPC_TRANSACTIONAL_MEM |
| BEGIN_FTR_SECTION_NESTED(69) |
| /* Test if 2 TM state bits are zero. If non-zero (ie. userspace was in |
| * transaction), go do TM stuff |
| */ |
| rldicl. r0, r12, (64-MSR_TS_LG), (64-2) |
| bne- 2f |
| END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69) |
| #endif |
| b load_up_vsx |
| #ifdef CONFIG_PPC_TRANSACTIONAL_MEM |
| 2: /* User process was in a transaction */ |
| bl save_nvgprs |
| RECONCILE_IRQ_STATE(r10, r11) |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl vsx_unavailable_tm |
| b ret_from_except |
| #endif |
| 1: |
| END_FTR_SECTION_IFSET(CPU_FTR_VSX) |
| #endif |
| bl save_nvgprs |
| RECONCILE_IRQ_STATE(r10, r11) |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl vsx_unavailable_exception |
| b ret_from_except |
| |
| STD_EXCEPTION_COMMON(0xf60, facility_unavailable, facility_unavailable_exception) |
| STD_EXCEPTION_COMMON(0xf80, hv_facility_unavailable, facility_unavailable_exception) |
| |
| .align 7 |
| .globl __end_handlers |
| __end_handlers: |
| |
| /* Equivalents to the above handlers for relocation-on interrupt vectors */ |
| STD_RELON_EXCEPTION_HV_OOL(0xe40, emulation_assist) |
| MASKABLE_RELON_EXCEPTION_HV_OOL(0xe80, h_doorbell) |
| |
| STD_RELON_EXCEPTION_PSERIES_OOL(0xf00, performance_monitor) |
| STD_RELON_EXCEPTION_PSERIES_OOL(0xf20, altivec_unavailable) |
| STD_RELON_EXCEPTION_PSERIES_OOL(0xf40, vsx_unavailable) |
| STD_RELON_EXCEPTION_PSERIES_OOL(0xf60, facility_unavailable) |
| STD_RELON_EXCEPTION_HV_OOL(0xf80, hv_facility_unavailable) |
| |
| #if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) |
| /* |
| * Data area reserved for FWNMI option. |
| * This address (0x7000) is fixed by the RPA. |
| */ |
| .= 0x7000 |
| .globl fwnmi_data_area |
| fwnmi_data_area: |
| |
| /* pseries and powernv need to keep the whole page from |
| * 0x7000 to 0x8000 free for use by the firmware |
| */ |
| . = 0x8000 |
| #endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */ |
| |
| .globl hmi_exception_early |
| hmi_exception_early: |
| EXCEPTION_PROLOG_1(PACA_EXGEN, NOTEST, 0xe60) |
| mr r10,r1 /* Save r1 */ |
| ld r1,PACAEMERGSP(r13) /* Use emergency stack */ |
| subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */ |
| std r9,_CCR(r1) /* save CR in stackframe */ |
| mfspr r11,SPRN_HSRR0 /* Save HSRR0 */ |
| std r11,_NIP(r1) /* save HSRR0 in stackframe */ |
| mfspr r12,SPRN_HSRR1 /* Save SRR1 */ |
| std r12,_MSR(r1) /* save SRR1 in stackframe */ |
| std r10,0(r1) /* make stack chain pointer */ |
| std r0,GPR0(r1) /* save r0 in stackframe */ |
| std r10,GPR1(r1) /* save r1 in stackframe */ |
| EXCEPTION_PROLOG_COMMON_2(PACA_EXGEN) |
| EXCEPTION_PROLOG_COMMON_3(0xe60) |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl hmi_exception_realmode |
| /* Windup the stack. */ |
| /* Move original HSRR0 and HSRR1 into the respective regs */ |
| ld r9,_MSR(r1) |
| mtspr SPRN_HSRR1,r9 |
| ld r3,_NIP(r1) |
| mtspr SPRN_HSRR0,r3 |
| ld r9,_CTR(r1) |
| mtctr r9 |
| ld r9,_XER(r1) |
| mtxer r9 |
| ld r9,_LINK(r1) |
| mtlr r9 |
| REST_GPR(0, r1) |
| REST_8GPRS(2, r1) |
| REST_GPR(10, r1) |
| ld r11,_CCR(r1) |
| mtcr r11 |
| REST_GPR(11, r1) |
| REST_2GPRS(12, r1) |
| /* restore original r1. */ |
| ld r1,GPR1(r1) |
| |
| /* |
| * Go to virtual mode and pull the HMI event information from |
| * firmware. |
| */ |
| .globl hmi_exception_after_realmode |
| hmi_exception_after_realmode: |
| SET_SCRATCH0(r13) |
| EXCEPTION_PROLOG_0(PACA_EXGEN) |
| b hmi_exception_hv |
| |
| |
| #define MACHINE_CHECK_HANDLER_WINDUP \ |
| /* Clear MSR_RI before setting SRR0 and SRR1. */\ |
| li r0,MSR_RI; \ |
| mfmsr r9; /* get MSR value */ \ |
| andc r9,r9,r0; \ |
| mtmsrd r9,1; /* Clear MSR_RI */ \ |
| /* Move original SRR0 and SRR1 into the respective regs */ \ |
| ld r9,_MSR(r1); \ |
| mtspr SPRN_SRR1,r9; \ |
| ld r3,_NIP(r1); \ |
| mtspr SPRN_SRR0,r3; \ |
| ld r9,_CTR(r1); \ |
| mtctr r9; \ |
| ld r9,_XER(r1); \ |
| mtxer r9; \ |
| ld r9,_LINK(r1); \ |
| mtlr r9; \ |
| REST_GPR(0, r1); \ |
| REST_8GPRS(2, r1); \ |
| REST_GPR(10, r1); \ |
| ld r11,_CCR(r1); \ |
| mtcr r11; \ |
| /* Decrement paca->in_mce. */ \ |
| lhz r12,PACA_IN_MCE(r13); \ |
| subi r12,r12,1; \ |
| sth r12,PACA_IN_MCE(r13); \ |
| REST_GPR(11, r1); \ |
| REST_2GPRS(12, r1); \ |
| /* restore original r1. */ \ |
| ld r1,GPR1(r1) |
| |
| /* |
| * Handle machine check early in real mode. We come here with |
| * ME=1, MMU (IR=0 and DR=0) off and using MC emergency stack. |
| */ |
| .align 7 |
| .globl machine_check_handle_early |
| machine_check_handle_early: |
| std r0,GPR0(r1) /* Save r0 */ |
| EXCEPTION_PROLOG_COMMON_3(0x200) |
| bl save_nvgprs |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl machine_check_early |
| std r3,RESULT(r1) /* Save result */ |
| ld r12,_MSR(r1) |
| #ifdef CONFIG_PPC_P7_NAP |
| /* |
| * Check if thread was in power saving mode. We come here when any |
| * of the following is true: |
| * a. thread wasn't in power saving mode |
| * b. thread was in power saving mode with no state loss or |
| * supervisor state loss |
| * |
| * Go back to nap again if (b) is true. |
| */ |
| rlwinm. r11,r12,47-31,30,31 /* Was it in power saving mode? */ |
| beq 4f /* No, it wasn;t */ |
| /* Thread was in power saving mode. Go back to nap again. */ |
| cmpwi r11,2 |
| bne 3f |
| /* Supervisor state loss */ |
| li r0,1 |
| stb r0,PACA_NAPSTATELOST(r13) |
| 3: bl machine_check_queue_event |
| MACHINE_CHECK_HANDLER_WINDUP |
| GET_PACA(r13) |
| ld r1,PACAR1(r13) |
| li r3,PNV_THREAD_NAP |
| b power7_enter_nap_mode |
| 4: |
| #endif |
| /* |
| * Check if we are coming from hypervisor userspace. If yes then we |
| * continue in host kernel in V mode to deliver the MC event. |
| */ |
| rldicl. r11,r12,4,63 /* See if MC hit while in HV mode. */ |
| beq 5f |
| andi. r11,r12,MSR_PR /* See if coming from user. */ |
| bne 9f /* continue in V mode if we are. */ |
| |
| 5: |
| #ifdef CONFIG_KVM_BOOK3S_64_HANDLER |
| /* |
| * We are coming from kernel context. Check if we are coming from |
| * guest. if yes, then we can continue. We will fall through |
| * do_kvm_200->kvmppc_interrupt to deliver the MC event to guest. |
| */ |
| lbz r11,HSTATE_IN_GUEST(r13) |
| cmpwi r11,0 /* Check if coming from guest */ |
| bne 9f /* continue if we are. */ |
| #endif |
| /* |
| * At this point we are not sure about what context we come from. |
| * Queue up the MCE event and return from the interrupt. |
| * But before that, check if this is an un-recoverable exception. |
| * If yes, then stay on emergency stack and panic. |
| */ |
| andi. r11,r12,MSR_RI |
| bne 2f |
| 1: mfspr r11,SPRN_SRR0 |
| ld r10,PACAKBASE(r13) |
| LOAD_HANDLER(r10,unrecover_mce) |
| mtspr SPRN_SRR0,r10 |
| ld r10,PACAKMSR(r13) |
| /* |
| * We are going down. But there are chances that we might get hit by |
| * another MCE during panic path and we may run into unstable state |
| * with no way out. Hence, turn ME bit off while going down, so that |
| * when another MCE is hit during panic path, system will checkstop |
| * and hypervisor will get restarted cleanly by SP. |
| */ |
| li r3,MSR_ME |
| andc r10,r10,r3 /* Turn off MSR_ME */ |
| mtspr SPRN_SRR1,r10 |
| rfid |
| b . |
| 2: |
| /* |
| * Check if we have successfully handled/recovered from error, if not |
| * then stay on emergency stack and panic. |
| */ |
| ld r3,RESULT(r1) /* Load result */ |
| cmpdi r3,0 /* see if we handled MCE successfully */ |
| |
| beq 1b /* if !handled then panic */ |
| /* |
| * Return from MC interrupt. |
| * Queue up the MCE event so that we can log it later, while |
| * returning from kernel or opal call. |
| */ |
| bl machine_check_queue_event |
| MACHINE_CHECK_HANDLER_WINDUP |
| rfid |
| 9: |
| /* Deliver the machine check to host kernel in V mode. */ |
| MACHINE_CHECK_HANDLER_WINDUP |
| b machine_check_pSeries |
| |
| unrecover_mce: |
| /* Invoke machine_check_exception to print MCE event and panic. */ |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl machine_check_exception |
| /* |
| * We will not reach here. Even if we did, there is no way out. Call |
| * unrecoverable_exception and die. |
| */ |
| 1: addi r3,r1,STACK_FRAME_OVERHEAD |
| bl unrecoverable_exception |
| b 1b |
| /* |
| * r13 points to the PACA, r9 contains the saved CR, |
| * r12 contain the saved SRR1, SRR0 is still ready for return |
| * r3 has the faulting address |
| * r9 - r13 are saved in paca->exslb. |
| * r3 is saved in paca->slb_r3 |
| * We assume we aren't going to take any exceptions during this procedure. |
| */ |
| slb_miss_realmode: |
| mflr r10 |
| #ifdef CONFIG_RELOCATABLE |
| mtctr r11 |
| #endif |
| |
| stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ |
| std r10,PACA_EXSLB+EX_LR(r13) /* save LR */ |
| |
| bl slb_allocate_realmode |
| |
| /* All done -- return from exception. */ |
| |
| ld r10,PACA_EXSLB+EX_LR(r13) |
| ld r3,PACA_EXSLB+EX_R3(r13) |
| lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ |
| |
| mtlr r10 |
| |
| andi. r10,r12,MSR_RI /* check for unrecoverable exception */ |
| beq- 2f |
| |
| .machine push |
| .machine "power4" |
| mtcrf 0x80,r9 |
| mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */ |
| .machine pop |
| |
| RESTORE_PPR_PACA(PACA_EXSLB, r9) |
| ld r9,PACA_EXSLB+EX_R9(r13) |
| ld r10,PACA_EXSLB+EX_R10(r13) |
| ld r11,PACA_EXSLB+EX_R11(r13) |
| ld r12,PACA_EXSLB+EX_R12(r13) |
| ld r13,PACA_EXSLB+EX_R13(r13) |
| rfid |
| b . /* prevent speculative execution */ |
| |
| 2: mfspr r11,SPRN_SRR0 |
| ld r10,PACAKBASE(r13) |
| LOAD_HANDLER(r10,unrecov_slb) |
| mtspr SPRN_SRR0,r10 |
| ld r10,PACAKMSR(r13) |
| mtspr SPRN_SRR1,r10 |
| rfid |
| b . |
| |
| unrecov_slb: |
| EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB) |
| RECONCILE_IRQ_STATE(r10, r11) |
| bl save_nvgprs |
| 1: addi r3,r1,STACK_FRAME_OVERHEAD |
| bl unrecoverable_exception |
| b 1b |
| |
| |
| #ifdef CONFIG_PPC_970_NAP |
| power4_fixup_nap: |
| andc r9,r9,r10 |
| std r9,TI_LOCAL_FLAGS(r11) |
| ld r10,_LINK(r1) /* make idle task do the */ |
| std r10,_NIP(r1) /* equivalent of a blr */ |
| blr |
| #endif |
| |
| /* |
| * Hash table stuff |
| */ |
| .align 7 |
| do_hash_page: |
| std r3,_DAR(r1) |
| std r4,_DSISR(r1) |
| |
| andis. r0,r4,0xa410 /* weird error? */ |
| bne- handle_page_fault /* if not, try to insert a HPTE */ |
| andis. r0,r4,DSISR_DABRMATCH@h |
| bne- handle_dabr_fault |
| CURRENT_THREAD_INFO(r11, r1) |
| lwz r0,TI_PREEMPT(r11) /* If we're in an "NMI" */ |
| andis. r0,r0,NMI_MASK@h /* (i.e. an irq when soft-disabled) */ |
| bne 77f /* then don't call hash_page now */ |
| |
| /* |
| * r3 contains the faulting address |
| * r4 msr |
| * r5 contains the trap number |
| * r6 contains dsisr |
| * |
| * at return r3 = 0 for success, 1 for page fault, negative for error |
| */ |
| mr r4,r12 |
| ld r6,_DSISR(r1) |
| bl __hash_page /* build HPTE if possible */ |
| cmpdi r3,0 /* see if __hash_page succeeded */ |
| |
| /* Success */ |
| beq fast_exc_return_irq /* Return from exception on success */ |
| |
| /* Error */ |
| blt- 13f |
| |
| /* Here we have a page fault that hash_page can't handle. */ |
| handle_page_fault: |
| 11: ld r4,_DAR(r1) |
| ld r5,_DSISR(r1) |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl do_page_fault |
| cmpdi r3,0 |
| beq+ 12f |
| bl save_nvgprs |
| mr r5,r3 |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| lwz r4,_DAR(r1) |
| bl bad_page_fault |
| b ret_from_except |
| |
| /* We have a data breakpoint exception - handle it */ |
| handle_dabr_fault: |
| bl save_nvgprs |
| ld r4,_DAR(r1) |
| ld r5,_DSISR(r1) |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl do_break |
| 12: b ret_from_except_lite |
| |
| |
| /* We have a page fault that hash_page could handle but HV refused |
| * the PTE insertion |
| */ |
| 13: bl save_nvgprs |
| mr r5,r3 |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| ld r4,_DAR(r1) |
| bl low_hash_fault |
| b ret_from_except |
| |
| /* |
| * We come here as a result of a DSI at a point where we don't want |
| * to call hash_page, such as when we are accessing memory (possibly |
| * user memory) inside a PMU interrupt that occurred while interrupts |
| * were soft-disabled. We want to invoke the exception handler for |
| * the access, or panic if there isn't a handler. |
| */ |
| 77: bl save_nvgprs |
| mr r4,r3 |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| li r5,SIGSEGV |
| bl bad_page_fault |
| b ret_from_except |
| |
| /* |
| * Here we have detected that the kernel stack pointer is bad. |
| * R9 contains the saved CR, r13 points to the paca, |
| * r10 contains the (bad) kernel stack pointer, |
| * r11 and r12 contain the saved SRR0 and SRR1. |
| * We switch to using an emergency stack, save the registers there, |
| * and call kernel_bad_stack(), which panics. |
| */ |
| bad_stack: |
| ld r1,PACAEMERGSP(r13) |
| subi r1,r1,64+INT_FRAME_SIZE |
| std r9,_CCR(r1) |
| std r10,GPR1(r1) |
| std r11,_NIP(r1) |
| std r12,_MSR(r1) |
| mfspr r11,SPRN_DAR |
| mfspr r12,SPRN_DSISR |
| std r11,_DAR(r1) |
| std r12,_DSISR(r1) |
| mflr r10 |
| mfctr r11 |
| mfxer r12 |
| std r10,_LINK(r1) |
| std r11,_CTR(r1) |
| std r12,_XER(r1) |
| SAVE_GPR(0,r1) |
| SAVE_GPR(2,r1) |
| ld r10,EX_R3(r3) |
| std r10,GPR3(r1) |
| SAVE_GPR(4,r1) |
| SAVE_4GPRS(5,r1) |
| ld r9,EX_R9(r3) |
| ld r10,EX_R10(r3) |
| SAVE_2GPRS(9,r1) |
| ld r9,EX_R11(r3) |
| ld r10,EX_R12(r3) |
| ld r11,EX_R13(r3) |
| std r9,GPR11(r1) |
| std r10,GPR12(r1) |
| std r11,GPR13(r1) |
| BEGIN_FTR_SECTION |
| ld r10,EX_CFAR(r3) |
| std r10,ORIG_GPR3(r1) |
| END_FTR_SECTION_IFSET(CPU_FTR_CFAR) |
| SAVE_8GPRS(14,r1) |
| SAVE_10GPRS(22,r1) |
| lhz r12,PACA_TRAP_SAVE(r13) |
| std r12,_TRAP(r1) |
| addi r11,r1,INT_FRAME_SIZE |
| std r11,0(r1) |
| li r12,0 |
| std r12,0(r11) |
| ld r2,PACATOC(r13) |
| ld r11,exception_marker@toc(r2) |
| std r12,RESULT(r1) |
| std r11,STACK_FRAME_OVERHEAD-16(r1) |
| 1: addi r3,r1,STACK_FRAME_OVERHEAD |
| bl kernel_bad_stack |
| b 1b |