| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2022, Harry Austen <hpausten@protonmail.com> |
| */ |
| |
| #include "msm8996.dtsi" |
| #include "pm8994.dtsi" |
| #include "pmi8994.dtsi" |
| #include "pmi8996.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
| #include <dt-bindings/sound/qcom,q6afe.h> |
| #include <dt-bindings/sound/qcom,q6asm.h> |
| #include <dt-bindings/sound/qcom,wcd9335.h> |
| |
| / { |
| aliases { |
| serial0 = &blsp1_uart2; |
| serial1 = &blsp2_uart2; |
| }; |
| |
| battery: battery { |
| compatible = "simple-battery"; |
| |
| constant-charge-current-max-microamp = <3000000>; |
| voltage-min-design-microvolt = <3400000>; |
| }; |
| |
| chosen { |
| stdout-path = "serial1:115200n8"; |
| }; |
| |
| clocks { |
| div1_mclk: div1-clk { |
| compatible = "gpio-gate-clock"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&audio_mclk>; |
| #clock-cells = <0>; |
| clocks = <&rpmcc RPM_SMD_DIV_CLK1>; |
| enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| divclk4: div4-clk { |
| compatible = "fixed-clock"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&divclk4_pin_a>; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| clock-output-names = "divclk4"; |
| }; |
| }; |
| |
| reserved-memory { |
| ramoops@ac000000 { |
| compatible = "ramoops"; |
| reg = <0 0xac000000 0 0x200000>; |
| record-size = <0x20000>; |
| console-size = <0x100000>; |
| pmsg-size = <0x80000>; |
| }; |
| }; |
| |
| vph_pwr: vph-pwr-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "vph_pwr"; |
| regulator-min-microvolt = <3700000>; |
| regulator-max-microvolt = <3700000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| wlan_en: wlan-en-regulator { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&wlan_en_gpios>; |
| regulator-name = "wlan-en-regulator"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| |
| gpio = <&pm8994_gpios 8 GPIO_ACTIVE_HIGH>; |
| |
| /* WLAN card specific delay */ |
| startup-delay-us = <70000>; |
| enable-active-high; |
| }; |
| }; |
| |
| &adsp_pil { |
| status = "okay"; |
| }; |
| |
| &blsp1_i2c3 { |
| status = "okay"; |
| |
| tfa9890_amp: audio-codec@36 { |
| compatible = "nxp,tfa9890"; |
| reg = <0x36>; |
| #sound-dai-cells = <0>; |
| }; |
| }; |
| |
| &blsp1_i2c6 { |
| status = "okay"; |
| |
| bq27541: fuel-gauge@55 { |
| compatible = "ti,bq27541"; |
| reg = <0x55>; |
| }; |
| }; |
| |
| &blsp1_uart2 { |
| label = "BT-UART"; |
| uart-has-rtscts; |
| status = "okay"; |
| |
| bluetooth { |
| compatible = "qcom,qca6174-bt"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&bt_en_gpios>; |
| enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; |
| clocks = <&divclk4>; |
| }; |
| }; |
| |
| &blsp2_i2c1 { |
| status = "okay"; |
| }; |
| |
| &blsp2_i2c6 { |
| status = "okay"; |
| |
| synaptics_rmi4_i2c: touchscreen@20 { |
| compatible = "syna,rmi4-i2c"; |
| reg = <0x20>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&touch_default>; |
| pinctrl-1 = <&touch_suspend>; |
| vdd-supply = <&vreg_l22a_3p0>; |
| vio-supply = <&vreg_s4a_1p8>; |
| syna,reset-delay-ms = <200>; |
| syna,startup-delay-ms = <200>; |
| |
| rmi4-f01@1 { |
| reg = <0x1>; |
| syna,nosleep-mode = <1>; |
| }; |
| |
| rmi4-f12@12 { |
| reg = <0x12>; |
| syna,sensor-type = <1>; |
| touchscreen-x-mm = <68>; |
| touchscreen-y-mm = <122>; |
| }; |
| }; |
| }; |
| |
| &blsp2_uart2 { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&blsp2_uart2_2pins_default>; |
| pinctrl-1 = <&blsp2_uart2_2pins_sleep>; |
| status = "okay"; |
| }; |
| |
| &camss { |
| vdda-supply = <&vreg_l2a_1p25>; |
| }; |
| |
| &dsi0 { |
| vdda-supply = <&vreg_l2a_1p25>; |
| vcca-supply = <&vreg_l22a_3p0>; |
| status = "okay"; |
| }; |
| |
| &dsi0_out { |
| data-lanes = <0 1 2 3>; |
| }; |
| |
| &dsi0_phy { |
| vdda-supply = <&vreg_l2a_1p25>; |
| vcca-supply = <&vreg_l28a_0p925>; |
| status = "okay"; |
| }; |
| |
| &gpu { |
| status = "okay"; |
| }; |
| |
| &hsusb_phy1 { |
| vdd-supply = <&vreg_l28a_0p925>; |
| vdda-pll-supply = <&vreg_l12a_1p8>; |
| vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; |
| status = "okay"; |
| }; |
| |
| &hsusb_phy2 { |
| vdd-supply = <&vreg_l28a_0p925>; |
| vdda-pll-supply = <&vreg_l12a_1p8>; |
| vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; |
| status = "okay"; |
| }; |
| |
| &mdp { |
| status = "okay"; |
| }; |
| |
| &mdss { |
| status = "okay"; |
| }; |
| |
| &mmcc { |
| vdd-gfx-supply = <&vdd_gfx>; |
| }; |
| |
| &mss_pil { |
| pll-supply = <&vreg_l12a_1p8>; |
| status = "okay"; |
| }; |
| |
| &pcie0 { |
| perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; |
| vddpe-3v3-supply = <&wlan_en>; |
| vdda-supply = <&vreg_l28a_0p925>; |
| status = "okay"; |
| }; |
| |
| &pcie_phy { |
| vdda-phy-supply = <&vreg_l28a_0p925>; |
| vdda-pll-supply = <&vreg_l12a_1p8>; |
| status = "okay"; |
| }; |
| |
| &pm8994_gpios { |
| bt_en_gpios: bt-en-gpios-state { |
| pins = "gpio19"; |
| function = PMIC_GPIO_FUNC_NORMAL; |
| output-low; |
| power-source = <PM8994_GPIO_S4>; |
| qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; |
| bias-pull-down; |
| }; |
| |
| wlan_en_gpios: wlan-en-gpios-state { |
| pins = "gpio8"; |
| function = PMIC_GPIO_FUNC_NORMAL; |
| output-low; |
| power-source = <PM8994_GPIO_S4>; |
| qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; |
| bias-pull-down; |
| }; |
| |
| audio_mclk: divclk1-state { |
| pins = "gpio15"; |
| function = PMIC_GPIO_FUNC_FUNC1; |
| power-source = <PM8994_GPIO_S4>; |
| }; |
| |
| divclk4_pin_a: divclk4-state { |
| pins = "gpio18"; |
| function = PMIC_GPIO_FUNC_FUNC2; |
| bias-disable; |
| power-source = <PM8994_GPIO_S4>; |
| }; |
| }; |
| |
| &pm8994_spmi_regulators { |
| qcom,saw-reg = <&saw3>; |
| |
| s9 { |
| qcom,saw-slave; |
| }; |
| |
| s10 { |
| qcom,saw-slave; |
| }; |
| |
| s11 { |
| qcom,saw-leader; |
| regulator-min-microvolt = <1140000>; |
| regulator-max-microvolt = <1140000>; |
| regulator-max-step-microvolt = <150000>; |
| regulator-always-on; |
| }; |
| }; |
| |
| &pmi8994_spmi_regulators { |
| vdd_gfx: s2 { |
| regulator-name = "vdd-gfx"; |
| regulator-min-microvolt = <980000>; |
| regulator-max-microvolt = <1230000>; |
| }; |
| }; |
| |
| &q6asmdai { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| dai@0 { |
| reg = <0>; |
| }; |
| |
| dai@1 { |
| reg = <1>; |
| }; |
| |
| dai@2 { |
| reg = <2>; |
| }; |
| }; |
| |
| &rpm_requests { |
| regulators { |
| compatible = "qcom,rpm-pm8994-regulators"; |
| |
| vreg_s3a_1p3: s3 { |
| regulator-name = "vreg_s3a_1p3"; |
| regulator-min-microvolt = <1300000>; |
| regulator-max-microvolt = <1300000>; |
| }; |
| |
| vreg_s4a_1p8: s4 { |
| regulator-name = "vreg_s4a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| }; |
| |
| vreg_s5a_2p15: s5 { |
| regulator-name = "vreg_s5a_2p15"; |
| regulator-min-microvolt = <2150000>; |
| regulator-max-microvolt = <2150000>; |
| }; |
| |
| vreg_s7a_0p8: s7 { |
| regulator-name = "vreg_s7a_0p8"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <800000>; |
| }; |
| |
| vreg_l1a_1p0: l1 { |
| regulator-name = "vreg_l1a_1p0"; |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <1000000>; |
| }; |
| |
| vreg_l2a_1p25: l2 { |
| regulator-name = "vreg_l2a_1p25"; |
| regulator-min-microvolt = <1250000>; |
| regulator-max-microvolt = <1250000>; |
| regulator-allow-set-load; |
| }; |
| |
| vreg_l3a_1p1: l3 { |
| regulator-name = "vreg_l3a_1p1"; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1100000>; |
| }; |
| |
| vreg_l4a_1p225: l4 { |
| regulator-name = "vreg_l4a_1p225"; |
| regulator-min-microvolt = <1225000>; |
| regulator-max-microvolt = <1225000>; |
| }; |
| |
| vreg_l6a_1p2: l6 { |
| regulator-name = "vreg_l6a_1p2"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| |
| vreg_l7a_1p8: l7 { |
| regulator-name = "vreg_l7a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| vreg_l9a_1p8: l9 { |
| regulator-name = "vreg_l9a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| vreg_l10a_1p8: l10 { |
| regulator-name = "vreg_l10a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| vreg_l11a_1p15: l11 { |
| regulator-name = "vreg_l11a_1p15"; |
| regulator-min-microvolt = <1150000>; |
| regulator-max-microvolt = <1150000>; |
| }; |
| |
| vreg_l12a_1p8: l12 { |
| regulator-name = "vreg_l12a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-allow-set-load; |
| }; |
| |
| vreg_l13a_2p95: l13 { |
| regulator-name = "vreg_l13a_2p95"; |
| regulator-min-microvolt = <2950000>; |
| regulator-max-microvolt = <2950000>; |
| }; |
| |
| vreg_l16a_2p7: l16 { |
| regulator-name = "vreg_l16a_2p7"; |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <2700000>; |
| }; |
| |
| vreg_l17a_2p6: l17 { |
| regulator-name = "vreg_l17a_2p6"; |
| regulator-min-microvolt = <2600000>; |
| regulator-max-microvolt = <2600000>; |
| }; |
| |
| vreg_l18a_3p3: l18 { |
| regulator-name = "vreg_l18a_3p3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| vreg_l19a_3p0: l19 { |
| regulator-name = "vreg_l19a_3p0"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| }; |
| |
| vreg_l20a_2p95: l20 { |
| regulator-name = "vreg_l20a_2p95"; |
| regulator-min-microvolt = <2950000>; |
| regulator-max-microvolt = <2950000>; |
| regulator-allow-set-load; |
| }; |
| |
| vreg_l21a_2p95: l21 { |
| regulator-name = "vreg_l21a_2p95"; |
| regulator-min-microvolt = <2950000>; |
| regulator-max-microvolt = <2950000>; |
| regulator-allow-set-load; |
| regulator-system-load = <200000>; |
| }; |
| |
| vreg_l22a_3p0: l22 { |
| regulator-name = "vreg_l22a_3p0"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| vreg_l23a_2p8: l23 { |
| regulator-name = "vreg_l23a_2p8"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| }; |
| |
| vreg_l24a_3p075: l24 { |
| regulator-name = "vreg_l24a_3p075"; |
| regulator-min-microvolt = <3075000>; |
| regulator-max-microvolt = <3075000>; |
| }; |
| |
| vreg_l25a_1p2: l25 { |
| regulator-name = "vreg_l25a_1p2"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-allow-set-load; |
| regulator-always-on; |
| }; |
| |
| vreg_l27a_1p2: l27 { |
| regulator-name = "vreg_l27a_1p2"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| |
| vreg_l28a_0p925: l28 { |
| regulator-name = "vreg_l28a_0p925"; |
| regulator-min-microvolt = <925000>; |
| regulator-max-microvolt = <925000>; |
| regulator-allow-set-load; |
| }; |
| |
| vreg_l29a_2p8: l29 { |
| regulator-name = "vreg_l29a_2p8"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| }; |
| |
| vreg_l30a_1p8: l30 { |
| regulator-name = "vreg_l30a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| vreg_l32a_1p8: l32 { |
| regulator-name = "vreg_l32a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| }; |
| }; |
| |
| &slpi_pil { |
| status = "okay"; |
| }; |
| |
| &sound { |
| compatible = "qcom,apq8096-sndcard"; |
| model = "OnePlus3"; |
| audio-routing = "RX_BIAS", "MCLK", |
| "AMIC2", "MIC BIAS2", |
| "MIC BIAS2", "Headset Mic", |
| "AMIC4", "MIC BIAS1", |
| "MIC BIAS1", "Primary Mic", |
| "AMIC5", "MIC BIAS3", |
| "MIC BIAS3", "Noise Mic"; |
| |
| mm1-dai-link { |
| link-name = "MultiMedia1"; |
| |
| cpu { |
| sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; |
| }; |
| }; |
| |
| mm2-dai-link { |
| link-name = "MultiMedia2"; |
| |
| cpu { |
| sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; |
| }; |
| }; |
| |
| mm3-dai-link { |
| link-name = "MultiMedia3"; |
| |
| cpu { |
| sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; |
| }; |
| }; |
| |
| mm4-dai-link { |
| link-name = "MultiMedia4"; |
| |
| cpu { |
| sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>; |
| }; |
| }; |
| |
| mm5-dai-link { |
| link-name = "MultiMedia5"; |
| |
| cpu { |
| sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>; |
| }; |
| }; |
| |
| mm6-dai-link { |
| link-name = "MultiMedia6"; |
| |
| cpu { |
| sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>; |
| }; |
| }; |
| |
| mm7-dai-link { |
| link-name = "MultiMedia7"; |
| |
| cpu { |
| sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA7>; |
| }; |
| }; |
| |
| mm8-dai-link { |
| link-name = "MultiMedia8"; |
| |
| cpu { |
| sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA8>; |
| }; |
| }; |
| |
| mm9-dai-link { |
| link-name = "MultiMedia9"; |
| |
| cpu { |
| sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA9>; |
| }; |
| }; |
| |
| mm10-dai-link { |
| link-name = "MultiMedia10"; |
| |
| cpu { |
| sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA10>; |
| }; |
| }; |
| |
| mm11-dai-link { |
| link-name = "MultiMedia11"; |
| |
| cpu { |
| sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA11>; |
| }; |
| }; |
| |
| mm12-dai-link { |
| link-name = "MultiMedia12"; |
| |
| cpu { |
| sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA12>; |
| }; |
| }; |
| |
| mm13-dai-link { |
| link-name = "MultiMedia13"; |
| |
| cpu { |
| sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA13>; |
| }; |
| }; |
| |
| mm14-dai-link { |
| link-name = "MultiMedia14"; |
| |
| cpu { |
| sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA14>; |
| }; |
| }; |
| |
| mm15-dai-link { |
| link-name = "MultiMedia15"; |
| |
| cpu { |
| sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA15>; |
| }; |
| }; |
| |
| mm16-dai-link { |
| link-name = "MultiMedia16"; |
| |
| cpu { |
| sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA16>; |
| }; |
| }; |
| |
| slim-dai-link { |
| link-name = "SLIM Playback"; |
| |
| cpu { |
| sound-dai = <&q6afedai SLIMBUS_6_RX>; |
| }; |
| |
| platform { |
| sound-dai = <&q6routing>; |
| }; |
| |
| codec { |
| sound-dai = <&wcd9335 AIF4_PB>; |
| }; |
| }; |
| |
| slimcap-dai-link { |
| link-name = "SLIM Capture"; |
| |
| cpu { |
| sound-dai = <&q6afedai SLIMBUS_0_TX>; |
| }; |
| |
| platform { |
| sound-dai = <&q6routing>; |
| }; |
| |
| codec { |
| sound-dai = <&wcd9335 AIF1_CAP>; |
| }; |
| }; |
| |
| speaker-dai-link { |
| link-name = "Speaker"; |
| |
| cpu { |
| sound-dai = <&q6afedai QUATERNARY_MI2S_RX>; |
| }; |
| |
| codec { |
| sound-dai = <&tfa9890_amp>; |
| }; |
| }; |
| }; |
| |
| &tlmm { |
| gpio-reserved-ranges = <81 4>; |
| |
| mdss_dsi_active: mdss-dsi-active-state { |
| pins = "gpio8"; |
| function = "gpio"; |
| drive-strength = <8>; |
| bias-disable; |
| }; |
| |
| mdss_dsi_suspend: mdss-dsi-suspend-state { |
| pins = "gpio8"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| mdss_te_active: mdss-te-active-state { |
| pins = "gpio10"; |
| function = "mdp_vsync"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| mdss_te_suspend: mdss-te-suspend-state { |
| pins = "gpio10"; |
| function = "mdp_vsync"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| touch_default: touch-default-state { |
| pins = "gpio89", "gpio125", "gpio49"; |
| function = "gpio"; |
| drive-strength = <16>; |
| bias-pull-up; |
| }; |
| |
| touch_suspend: touch-suspend-state { |
| pins = "gpio89", "gpio125", "gpio49"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| }; |
| |
| &ufsphy { |
| vdda-phy-supply = <&vreg_l28a_0p925>; |
| vdda-pll-supply = <&vreg_l12a_1p8>; |
| vddp-ref-clk-supply = <&vreg_l25a_1p2>; |
| |
| status = "okay"; |
| }; |
| |
| &ufshc { |
| vcc-supply = <&vreg_l20a_2p95>; |
| vccq-supply = <&vreg_l25a_1p2>; |
| vccq2-supply = <&vreg_s4a_1p8>; |
| |
| vcc-max-microamp = <600000>; |
| vccq-max-microamp = <450000>; |
| vccq2-max-microamp = <450000>; |
| |
| status = "okay"; |
| }; |
| |
| &usb3 { |
| status = "okay"; |
| }; |
| |
| &usb3_dwc3 { |
| phys = <&hsusb_phy1>; |
| phy-names = "usb2-phy"; |
| |
| maximum-speed = "high-speed"; |
| }; |
| |
| &venus { |
| status = "okay"; |
| }; |
| |
| &wcd9335 { |
| clock-names = "mclk", "slimbus"; |
| clocks = <&div1_mclk>, |
| <&rpmcc RPM_SMD_BB_CLK1>; |
| |
| vdd-buck-supply = <&vreg_s4a_1p8>; |
| vdd-buck-sido-supply = <&vreg_s4a_1p8>; |
| vdd-tx-supply = <&vreg_s4a_1p8>; |
| vdd-rx-supply = <&vreg_s4a_1p8>; |
| vdd-io-supply = <&vreg_s4a_1p8>; |
| }; |
