| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2018, Linaro Limited |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include "qcs404-evb.dtsi" |
| |
| / { |
| model = "Qualcomm Technologies, Inc. QCS404 EVB 4000"; |
| compatible = "qcom,qcs404-evb-4000", "qcom,qcs404-evb", |
| "qcom,qcs404"; |
| }; |
| |
| ðernet { |
| status = "okay"; |
| |
| snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>; |
| snps,reset-active-low; |
| snps,reset-delays-us = <0 10000 10000>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <ðernet_defaults>; |
| |
| phy-handle = <&phy1>; |
| phy-mode = "rgmii"; |
| mdio { |
| #address-cells = <0x1>; |
| #size-cells = <0x0>; |
| compatible = "snps,dwmac-mdio"; |
| phy1: phy@4 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| device_type = "ethernet-phy"; |
| reg = <0x4>; |
| }; |
| }; |
| }; |
| |
| &tlmm { |
| ethernet_defaults: ethernet-defaults-state { |
| int-pins { |
| pins = "gpio61"; |
| function = "rgmii_int"; |
| bias-disable; |
| drive-strength = <2>; |
| }; |
| mdc-pins { |
| pins = "gpio76"; |
| function = "rgmii_mdc"; |
| bias-pull-up; |
| }; |
| mdio-pins { |
| pins = "gpio75"; |
| function = "rgmii_mdio"; |
| bias-pull-up; |
| }; |
| tx-pins { |
| pins = "gpio67", "gpio66", "gpio65", "gpio64"; |
| function = "rgmii_tx"; |
| bias-pull-up; |
| drive-strength = <16>; |
| }; |
| rx-pins { |
| pins = "gpio73", "gpio72", "gpio71", "gpio70"; |
| function = "rgmii_rx"; |
| bias-disable; |
| drive-strength = <2>; |
| }; |
| tx-ctl-pins { |
| pins = "gpio68"; |
| function = "rgmii_ctl"; |
| bias-pull-up; |
| drive-strength = <16>; |
| }; |
| rx-ctl-pins { |
| pins = "gpio74"; |
| function = "rgmii_ctl"; |
| bias-disable; |
| drive-strength = <2>; |
| }; |
| tx-ck-pins { |
| pins = "gpio63"; |
| function = "rgmii_ck"; |
| bias-pull-up; |
| drive-strength = <16>; |
| }; |
| rx-ck-pins { |
| pins = "gpio69"; |
| function = "rgmii_ck"; |
| bias-disable; |
| drive-strength = <2>; |
| }; |
| }; |
| }; |