| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * |
| * Copyright (C) STMicroelectronics SA 2017 |
| * Author(s): M'boumba Cedric Madianga <cedric.madianga@gmail.com> |
| * Pierre-Yves Mordret <pierre-yves.mordret@st.com> |
| * |
| * DMA Router driver for STM32 DMA MUX |
| * |
| * Based on TI DMA Crossbar driver |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/of_dma.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/reset.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| |
| #define STM32_DMAMUX_CCR(x) (0x4 * (x)) |
| #define STM32_DMAMUX_MAX_DMA_REQUESTS 32 |
| #define STM32_DMAMUX_MAX_REQUESTS 255 |
| |
| struct stm32_dmamux { |
| u32 master; |
| u32 request; |
| u32 chan_id; |
| }; |
| |
| struct stm32_dmamux_data { |
| struct dma_router dmarouter; |
| struct clk *clk; |
| void __iomem *iomem; |
| u32 dma_requests; /* Number of DMA requests connected to DMAMUX */ |
| u32 dmamux_requests; /* Number of DMA requests routed toward DMAs */ |
| spinlock_t lock; /* Protects register access */ |
| DECLARE_BITMAP(dma_inuse, STM32_DMAMUX_MAX_DMA_REQUESTS); /* Used DMA channel */ |
| u32 ccr[STM32_DMAMUX_MAX_DMA_REQUESTS]; /* Used to backup CCR register |
| * in suspend |
| */ |
| u32 dma_reqs[]; /* Number of DMA Request per DMA masters. |
| * [0] holds number of DMA Masters. |
| * To be kept at very end of this structure |
| */ |
| }; |
| |
| static inline u32 stm32_dmamux_read(void __iomem *iomem, u32 reg) |
| { |
| return readl_relaxed(iomem + reg); |
| } |
| |
| static inline void stm32_dmamux_write(void __iomem *iomem, u32 reg, u32 val) |
| { |
| writel_relaxed(val, iomem + reg); |
| } |
| |
| static void stm32_dmamux_free(struct device *dev, void *route_data) |
| { |
| struct stm32_dmamux_data *dmamux = dev_get_drvdata(dev); |
| struct stm32_dmamux *mux = route_data; |
| unsigned long flags; |
| |
| /* Clear dma request */ |
| spin_lock_irqsave(&dmamux->lock, flags); |
| |
| stm32_dmamux_write(dmamux->iomem, STM32_DMAMUX_CCR(mux->chan_id), 0); |
| clear_bit(mux->chan_id, dmamux->dma_inuse); |
| |
| pm_runtime_put_sync(dev); |
| |
| spin_unlock_irqrestore(&dmamux->lock, flags); |
| |
| dev_dbg(dev, "Unmapping DMAMUX(%u) to DMA%u(%u)\n", |
| mux->request, mux->master, mux->chan_id); |
| |
| kfree(mux); |
| } |
| |
| static void *stm32_dmamux_route_allocate(struct of_phandle_args *dma_spec, |
| struct of_dma *ofdma) |
| { |
| struct platform_device *pdev = of_find_device_by_node(ofdma->of_node); |
| struct stm32_dmamux_data *dmamux = platform_get_drvdata(pdev); |
| struct stm32_dmamux *mux; |
| u32 i, min, max; |
| int ret; |
| unsigned long flags; |
| |
| if (dma_spec->args_count != 3) { |
| dev_err(&pdev->dev, "invalid number of dma mux args\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| if (dma_spec->args[0] > dmamux->dmamux_requests) { |
| dev_err(&pdev->dev, "invalid mux request number: %d\n", |
| dma_spec->args[0]); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| mux = kzalloc(sizeof(*mux), GFP_KERNEL); |
| if (!mux) |
| return ERR_PTR(-ENOMEM); |
| |
| spin_lock_irqsave(&dmamux->lock, flags); |
| mux->chan_id = find_first_zero_bit(dmamux->dma_inuse, |
| dmamux->dma_requests); |
| |
| if (mux->chan_id == dmamux->dma_requests) { |
| spin_unlock_irqrestore(&dmamux->lock, flags); |
| dev_err(&pdev->dev, "Run out of free DMA requests\n"); |
| ret = -ENOMEM; |
| goto error_chan_id; |
| } |
| set_bit(mux->chan_id, dmamux->dma_inuse); |
| spin_unlock_irqrestore(&dmamux->lock, flags); |
| |
| /* Look for DMA Master */ |
| for (i = 1, min = 0, max = dmamux->dma_reqs[i]; |
| i <= dmamux->dma_reqs[0]; |
| min += dmamux->dma_reqs[i], max += dmamux->dma_reqs[++i]) |
| if (mux->chan_id < max) |
| break; |
| mux->master = i - 1; |
| |
| /* The of_node_put() will be done in of_dma_router_xlate function */ |
| dma_spec->np = of_parse_phandle(ofdma->of_node, "dma-masters", i - 1); |
| if (!dma_spec->np) { |
| dev_err(&pdev->dev, "can't get dma master\n"); |
| ret = -EINVAL; |
| goto error; |
| } |
| |
| /* Set dma request */ |
| spin_lock_irqsave(&dmamux->lock, flags); |
| ret = pm_runtime_resume_and_get(&pdev->dev); |
| if (ret < 0) { |
| spin_unlock_irqrestore(&dmamux->lock, flags); |
| goto error; |
| } |
| spin_unlock_irqrestore(&dmamux->lock, flags); |
| |
| mux->request = dma_spec->args[0]; |
| |
| /* craft DMA spec */ |
| dma_spec->args[3] = dma_spec->args[2] | mux->chan_id << 16; |
| dma_spec->args[2] = dma_spec->args[1]; |
| dma_spec->args[1] = 0; |
| dma_spec->args[0] = mux->chan_id - min; |
| dma_spec->args_count = 4; |
| |
| stm32_dmamux_write(dmamux->iomem, STM32_DMAMUX_CCR(mux->chan_id), |
| mux->request); |
| dev_dbg(&pdev->dev, "Mapping DMAMUX(%u) to DMA%u(%u)\n", |
| mux->request, mux->master, mux->chan_id); |
| |
| return mux; |
| |
| error: |
| clear_bit(mux->chan_id, dmamux->dma_inuse); |
| |
| error_chan_id: |
| kfree(mux); |
| return ERR_PTR(ret); |
| } |
| |
| static const struct of_device_id stm32_stm32dma_master_match[] __maybe_unused = { |
| { .compatible = "st,stm32-dma", }, |
| {}, |
| }; |
| |
| static int stm32_dmamux_probe(struct platform_device *pdev) |
| { |
| struct device_node *node = pdev->dev.of_node; |
| const struct of_device_id *match; |
| struct device_node *dma_node; |
| struct stm32_dmamux_data *stm32_dmamux; |
| struct resource *res; |
| void __iomem *iomem; |
| struct reset_control *rst; |
| int i, count, ret; |
| u32 dma_req; |
| |
| if (!node) |
| return -ENODEV; |
| |
| count = device_property_count_u32(&pdev->dev, "dma-masters"); |
| if (count < 0) { |
| dev_err(&pdev->dev, "Can't get DMA master(s) node\n"); |
| return -ENODEV; |
| } |
| |
| stm32_dmamux = devm_kzalloc(&pdev->dev, sizeof(*stm32_dmamux) + |
| sizeof(u32) * (count + 1), GFP_KERNEL); |
| if (!stm32_dmamux) |
| return -ENOMEM; |
| |
| dma_req = 0; |
| for (i = 1; i <= count; i++) { |
| dma_node = of_parse_phandle(node, "dma-masters", i - 1); |
| |
| match = of_match_node(stm32_stm32dma_master_match, dma_node); |
| if (!match) { |
| dev_err(&pdev->dev, "DMA master is not supported\n"); |
| of_node_put(dma_node); |
| return -EINVAL; |
| } |
| |
| if (of_property_read_u32(dma_node, "dma-requests", |
| &stm32_dmamux->dma_reqs[i])) { |
| dev_info(&pdev->dev, |
| "Missing MUX output information, using %u.\n", |
| STM32_DMAMUX_MAX_DMA_REQUESTS); |
| stm32_dmamux->dma_reqs[i] = |
| STM32_DMAMUX_MAX_DMA_REQUESTS; |
| } |
| dma_req += stm32_dmamux->dma_reqs[i]; |
| of_node_put(dma_node); |
| } |
| |
| if (dma_req > STM32_DMAMUX_MAX_DMA_REQUESTS) { |
| dev_err(&pdev->dev, "Too many DMA Master Requests to manage\n"); |
| return -ENODEV; |
| } |
| |
| stm32_dmamux->dma_requests = dma_req; |
| stm32_dmamux->dma_reqs[0] = count; |
| |
| if (device_property_read_u32(&pdev->dev, "dma-requests", |
| &stm32_dmamux->dmamux_requests)) { |
| stm32_dmamux->dmamux_requests = STM32_DMAMUX_MAX_REQUESTS; |
| dev_warn(&pdev->dev, "DMAMUX defaulting on %u requests\n", |
| stm32_dmamux->dmamux_requests); |
| } |
| pm_runtime_get_noresume(&pdev->dev); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| iomem = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(iomem)) |
| return PTR_ERR(iomem); |
| |
| spin_lock_init(&stm32_dmamux->lock); |
| |
| stm32_dmamux->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(stm32_dmamux->clk)) |
| return dev_err_probe(&pdev->dev, PTR_ERR(stm32_dmamux->clk), |
| "Missing clock controller\n"); |
| |
| ret = clk_prepare_enable(stm32_dmamux->clk); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "clk_prep_enable error: %d\n", ret); |
| return ret; |
| } |
| |
| rst = devm_reset_control_get(&pdev->dev, NULL); |
| if (IS_ERR(rst)) { |
| ret = PTR_ERR(rst); |
| if (ret == -EPROBE_DEFER) |
| goto err_clk; |
| } else if (count > 1) { /* Don't reset if there is only one dma-master */ |
| reset_control_assert(rst); |
| udelay(2); |
| reset_control_deassert(rst); |
| } |
| |
| stm32_dmamux->iomem = iomem; |
| stm32_dmamux->dmarouter.dev = &pdev->dev; |
| stm32_dmamux->dmarouter.route_free = stm32_dmamux_free; |
| |
| platform_set_drvdata(pdev, stm32_dmamux); |
| pm_runtime_set_active(&pdev->dev); |
| pm_runtime_enable(&pdev->dev); |
| |
| pm_runtime_get_noresume(&pdev->dev); |
| |
| /* Reset the dmamux */ |
| for (i = 0; i < stm32_dmamux->dma_requests; i++) |
| stm32_dmamux_write(stm32_dmamux->iomem, STM32_DMAMUX_CCR(i), 0); |
| |
| pm_runtime_put(&pdev->dev); |
| |
| ret = of_dma_router_register(node, stm32_dmamux_route_allocate, |
| &stm32_dmamux->dmarouter); |
| if (ret) |
| goto pm_disable; |
| |
| return 0; |
| |
| pm_disable: |
| pm_runtime_disable(&pdev->dev); |
| err_clk: |
| clk_disable_unprepare(stm32_dmamux->clk); |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_PM |
| static int stm32_dmamux_runtime_suspend(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct stm32_dmamux_data *stm32_dmamux = platform_get_drvdata(pdev); |
| |
| clk_disable_unprepare(stm32_dmamux->clk); |
| |
| return 0; |
| } |
| |
| static int stm32_dmamux_runtime_resume(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct stm32_dmamux_data *stm32_dmamux = platform_get_drvdata(pdev); |
| int ret; |
| |
| ret = clk_prepare_enable(stm32_dmamux->clk); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to prepare_enable clock\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int stm32_dmamux_suspend(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct stm32_dmamux_data *stm32_dmamux = platform_get_drvdata(pdev); |
| int i, ret; |
| |
| ret = pm_runtime_resume_and_get(dev); |
| if (ret < 0) |
| return ret; |
| |
| for (i = 0; i < stm32_dmamux->dma_requests; i++) |
| stm32_dmamux->ccr[i] = stm32_dmamux_read(stm32_dmamux->iomem, |
| STM32_DMAMUX_CCR(i)); |
| |
| pm_runtime_put_sync(dev); |
| |
| pm_runtime_force_suspend(dev); |
| |
| return 0; |
| } |
| |
| static int stm32_dmamux_resume(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct stm32_dmamux_data *stm32_dmamux = platform_get_drvdata(pdev); |
| int i, ret; |
| |
| ret = pm_runtime_force_resume(dev); |
| if (ret < 0) |
| return ret; |
| |
| ret = pm_runtime_resume_and_get(dev); |
| if (ret < 0) |
| return ret; |
| |
| for (i = 0; i < stm32_dmamux->dma_requests; i++) |
| stm32_dmamux_write(stm32_dmamux->iomem, STM32_DMAMUX_CCR(i), |
| stm32_dmamux->ccr[i]); |
| |
| pm_runtime_put_sync(dev); |
| |
| return 0; |
| } |
| #endif |
| |
| static const struct dev_pm_ops stm32_dmamux_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(stm32_dmamux_suspend, stm32_dmamux_resume) |
| SET_RUNTIME_PM_OPS(stm32_dmamux_runtime_suspend, |
| stm32_dmamux_runtime_resume, NULL) |
| }; |
| |
| static const struct of_device_id stm32_dmamux_match[] = { |
| { .compatible = "st,stm32h7-dmamux" }, |
| {}, |
| }; |
| |
| static struct platform_driver stm32_dmamux_driver = { |
| .probe = stm32_dmamux_probe, |
| .driver = { |
| .name = "stm32-dmamux", |
| .of_match_table = stm32_dmamux_match, |
| .pm = &stm32_dmamux_pm_ops, |
| }, |
| }; |
| |
| static int __init stm32_dmamux_init(void) |
| { |
| return platform_driver_register(&stm32_dmamux_driver); |
| } |
| arch_initcall(stm32_dmamux_init); |
| |
| MODULE_DESCRIPTION("DMA Router driver for STM32 DMA MUX"); |
| MODULE_AUTHOR("M'boumba Cedric Madianga <cedric.madianga@gmail.com>"); |
| MODULE_AUTHOR("Pierre-Yves Mordret <pierre-yves.mordret@st.com>"); |
| MODULE_LICENSE("GPL v2"); |