| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Driver for Linear Technology LTC2471 and LTC2473 voltage monitors |
| * The LTC2473 is identical to the 2471, but reports a differential signal. |
| * |
| * Copyright (C) 2017 Topic Embedded Products |
| * Author: Mike Looijmans <mike.looijmans@topic.nl> |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/i2c.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| |
| enum ltc2471_chips { |
| ltc2471, |
| ltc2473, |
| }; |
| |
| struct ltc2471_data { |
| struct i2c_client *client; |
| }; |
| |
| /* Reference voltage is 1.25V */ |
| #define LTC2471_VREF 1250 |
| |
| /* Read two bytes from the I2C bus to obtain the ADC result */ |
| static int ltc2471_get_value(struct i2c_client *client) |
| { |
| int ret; |
| __be16 buf; |
| |
| ret = i2c_master_recv(client, (char *)&buf, sizeof(buf)); |
| if (ret < 0) |
| return ret; |
| if (ret != sizeof(buf)) |
| return -EIO; |
| |
| /* MSB first */ |
| return be16_to_cpu(buf); |
| } |
| |
| static int ltc2471_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, int *val2, long info) |
| { |
| struct ltc2471_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| switch (info) { |
| case IIO_CHAN_INFO_RAW: |
| ret = ltc2471_get_value(data->client); |
| if (ret < 0) |
| return ret; |
| *val = ret; |
| return IIO_VAL_INT; |
| |
| case IIO_CHAN_INFO_SCALE: |
| if (chan->differential) |
| /* Output ranges from -VREF to +VREF */ |
| *val = 2 * LTC2471_VREF; |
| else |
| /* Output ranges from 0 to VREF */ |
| *val = LTC2471_VREF; |
| *val2 = 16; /* 16 data bits */ |
| return IIO_VAL_FRACTIONAL_LOG2; |
| |
| case IIO_CHAN_INFO_OFFSET: |
| /* Only differential chip has this property */ |
| *val = -LTC2471_VREF; |
| return IIO_VAL_INT; |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static const struct iio_chan_spec ltc2471_channel[] = { |
| { |
| .type = IIO_VOLTAGE, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), |
| }, |
| }; |
| |
| static const struct iio_chan_spec ltc2473_channel[] = { |
| { |
| .type = IIO_VOLTAGE, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | |
| BIT(IIO_CHAN_INFO_OFFSET), |
| .differential = 1, |
| }, |
| }; |
| |
| static const struct iio_info ltc2471_info = { |
| .read_raw = ltc2471_read_raw, |
| }; |
| |
| static int ltc2471_i2c_probe(struct i2c_client *client) |
| { |
| const struct i2c_device_id *id = i2c_client_get_device_id(client); |
| struct iio_dev *indio_dev; |
| struct ltc2471_data *data; |
| int ret; |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) |
| return -EOPNOTSUPP; |
| |
| indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| data = iio_priv(indio_dev); |
| data->client = client; |
| |
| indio_dev->name = id->name; |
| indio_dev->info = <c2471_info; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| if (id->driver_data == ltc2473) |
| indio_dev->channels = ltc2473_channel; |
| else |
| indio_dev->channels = ltc2471_channel; |
| indio_dev->num_channels = 1; |
| |
| /* Trigger once to start conversion and check if chip is there */ |
| ret = ltc2471_get_value(client); |
| if (ret < 0) { |
| dev_err(&client->dev, "Cannot read from device.\n"); |
| return ret; |
| } |
| |
| return devm_iio_device_register(&client->dev, indio_dev); |
| } |
| |
| static const struct i2c_device_id ltc2471_i2c_id[] = { |
| { "ltc2471", ltc2471 }, |
| { "ltc2473", ltc2473 }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, ltc2471_i2c_id); |
| |
| static struct i2c_driver ltc2471_i2c_driver = { |
| .driver = { |
| .name = "ltc2471", |
| }, |
| .probe_new = ltc2471_i2c_probe, |
| .id_table = ltc2471_i2c_id, |
| }; |
| |
| module_i2c_driver(ltc2471_i2c_driver); |
| |
| MODULE_DESCRIPTION("LTC2471/LTC2473 ADC driver"); |
| MODULE_AUTHOR("Topic Embedded Products"); |
| MODULE_LICENSE("GPL v2"); |