| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2020 Synopsys, Inc. and/or its affiliates. |
| * Synopsys DesignWare XPCS helpers |
| * |
| * Author: Jose Abreu <Jose.Abreu@synopsys.com> |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/pcs/pcs-xpcs.h> |
| #include <linux/mdio.h> |
| #include <linux/phylink.h> |
| #include <linux/workqueue.h> |
| #include "pcs-xpcs.h" |
| |
| #define phylink_pcs_to_xpcs(pl_pcs) \ |
| container_of((pl_pcs), struct dw_xpcs, pcs) |
| |
| static const int xpcs_usxgmii_features[] = { |
| ETHTOOL_LINK_MODE_Pause_BIT, |
| ETHTOOL_LINK_MODE_Asym_Pause_BIT, |
| ETHTOOL_LINK_MODE_Autoneg_BIT, |
| ETHTOOL_LINK_MODE_1000baseKX_Full_BIT, |
| ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT, |
| ETHTOOL_LINK_MODE_10000baseKR_Full_BIT, |
| ETHTOOL_LINK_MODE_2500baseX_Full_BIT, |
| __ETHTOOL_LINK_MODE_MASK_NBITS, |
| }; |
| |
| static const int xpcs_10gkr_features[] = { |
| ETHTOOL_LINK_MODE_Pause_BIT, |
| ETHTOOL_LINK_MODE_Asym_Pause_BIT, |
| ETHTOOL_LINK_MODE_10000baseKR_Full_BIT, |
| __ETHTOOL_LINK_MODE_MASK_NBITS, |
| }; |
| |
| static const int xpcs_xlgmii_features[] = { |
| ETHTOOL_LINK_MODE_Pause_BIT, |
| ETHTOOL_LINK_MODE_Asym_Pause_BIT, |
| ETHTOOL_LINK_MODE_25000baseCR_Full_BIT, |
| ETHTOOL_LINK_MODE_25000baseKR_Full_BIT, |
| ETHTOOL_LINK_MODE_25000baseSR_Full_BIT, |
| ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT, |
| ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT, |
| ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT, |
| ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT, |
| ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT, |
| ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT, |
| ETHTOOL_LINK_MODE_50000baseSR2_Full_BIT, |
| ETHTOOL_LINK_MODE_50000baseKR_Full_BIT, |
| ETHTOOL_LINK_MODE_50000baseSR_Full_BIT, |
| ETHTOOL_LINK_MODE_50000baseCR_Full_BIT, |
| ETHTOOL_LINK_MODE_50000baseLR_ER_FR_Full_BIT, |
| ETHTOOL_LINK_MODE_50000baseDR_Full_BIT, |
| ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT, |
| ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT, |
| ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT, |
| ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT, |
| ETHTOOL_LINK_MODE_100000baseKR2_Full_BIT, |
| ETHTOOL_LINK_MODE_100000baseSR2_Full_BIT, |
| ETHTOOL_LINK_MODE_100000baseCR2_Full_BIT, |
| ETHTOOL_LINK_MODE_100000baseLR2_ER2_FR2_Full_BIT, |
| ETHTOOL_LINK_MODE_100000baseDR2_Full_BIT, |
| __ETHTOOL_LINK_MODE_MASK_NBITS, |
| }; |
| |
| static const int xpcs_sgmii_features[] = { |
| ETHTOOL_LINK_MODE_Pause_BIT, |
| ETHTOOL_LINK_MODE_Asym_Pause_BIT, |
| ETHTOOL_LINK_MODE_Autoneg_BIT, |
| ETHTOOL_LINK_MODE_10baseT_Half_BIT, |
| ETHTOOL_LINK_MODE_10baseT_Full_BIT, |
| ETHTOOL_LINK_MODE_100baseT_Half_BIT, |
| ETHTOOL_LINK_MODE_100baseT_Full_BIT, |
| ETHTOOL_LINK_MODE_1000baseT_Half_BIT, |
| ETHTOOL_LINK_MODE_1000baseT_Full_BIT, |
| __ETHTOOL_LINK_MODE_MASK_NBITS, |
| }; |
| |
| static const int xpcs_1000basex_features[] = { |
| ETHTOOL_LINK_MODE_Pause_BIT, |
| ETHTOOL_LINK_MODE_Asym_Pause_BIT, |
| ETHTOOL_LINK_MODE_Autoneg_BIT, |
| ETHTOOL_LINK_MODE_1000baseX_Full_BIT, |
| __ETHTOOL_LINK_MODE_MASK_NBITS, |
| }; |
| |
| static const int xpcs_2500basex_features[] = { |
| ETHTOOL_LINK_MODE_Pause_BIT, |
| ETHTOOL_LINK_MODE_Asym_Pause_BIT, |
| ETHTOOL_LINK_MODE_Autoneg_BIT, |
| ETHTOOL_LINK_MODE_2500baseX_Full_BIT, |
| ETHTOOL_LINK_MODE_2500baseT_Full_BIT, |
| __ETHTOOL_LINK_MODE_MASK_NBITS, |
| }; |
| |
| static const phy_interface_t xpcs_usxgmii_interfaces[] = { |
| PHY_INTERFACE_MODE_USXGMII, |
| }; |
| |
| static const phy_interface_t xpcs_10gkr_interfaces[] = { |
| PHY_INTERFACE_MODE_10GKR, |
| }; |
| |
| static const phy_interface_t xpcs_xlgmii_interfaces[] = { |
| PHY_INTERFACE_MODE_XLGMII, |
| }; |
| |
| static const phy_interface_t xpcs_sgmii_interfaces[] = { |
| PHY_INTERFACE_MODE_SGMII, |
| }; |
| |
| static const phy_interface_t xpcs_1000basex_interfaces[] = { |
| PHY_INTERFACE_MODE_1000BASEX, |
| }; |
| |
| static const phy_interface_t xpcs_2500basex_interfaces[] = { |
| PHY_INTERFACE_MODE_2500BASEX, |
| PHY_INTERFACE_MODE_MAX, |
| }; |
| |
| enum { |
| DW_XPCS_USXGMII, |
| DW_XPCS_10GKR, |
| DW_XPCS_XLGMII, |
| DW_XPCS_SGMII, |
| DW_XPCS_1000BASEX, |
| DW_XPCS_2500BASEX, |
| DW_XPCS_INTERFACE_MAX, |
| }; |
| |
| struct xpcs_compat { |
| const int *supported; |
| const phy_interface_t *interface; |
| int num_interfaces; |
| int an_mode; |
| int (*pma_config)(struct dw_xpcs *xpcs); |
| }; |
| |
| struct xpcs_id { |
| u32 id; |
| u32 mask; |
| const struct xpcs_compat *compat; |
| }; |
| |
| static const struct xpcs_compat *xpcs_find_compat(const struct xpcs_id *id, |
| phy_interface_t interface) |
| { |
| int i, j; |
| |
| for (i = 0; i < DW_XPCS_INTERFACE_MAX; i++) { |
| const struct xpcs_compat *compat = &id->compat[i]; |
| |
| for (j = 0; j < compat->num_interfaces; j++) |
| if (compat->interface[j] == interface) |
| return compat; |
| } |
| |
| return NULL; |
| } |
| |
| int xpcs_get_an_mode(struct dw_xpcs *xpcs, phy_interface_t interface) |
| { |
| const struct xpcs_compat *compat; |
| |
| compat = xpcs_find_compat(xpcs->id, interface); |
| if (!compat) |
| return -ENODEV; |
| |
| return compat->an_mode; |
| } |
| EXPORT_SYMBOL_GPL(xpcs_get_an_mode); |
| |
| static bool __xpcs_linkmode_supported(const struct xpcs_compat *compat, |
| enum ethtool_link_mode_bit_indices linkmode) |
| { |
| int i; |
| |
| for (i = 0; compat->supported[i] != __ETHTOOL_LINK_MODE_MASK_NBITS; i++) |
| if (compat->supported[i] == linkmode) |
| return true; |
| |
| return false; |
| } |
| |
| #define xpcs_linkmode_supported(compat, mode) \ |
| __xpcs_linkmode_supported(compat, ETHTOOL_LINK_MODE_ ## mode ## _BIT) |
| |
| int xpcs_read(struct dw_xpcs *xpcs, int dev, u32 reg) |
| { |
| return mdiodev_c45_read(xpcs->mdiodev, dev, reg); |
| } |
| |
| int xpcs_write(struct dw_xpcs *xpcs, int dev, u32 reg, u16 val) |
| { |
| return mdiodev_c45_write(xpcs->mdiodev, dev, reg, val); |
| } |
| |
| static int xpcs_modify_changed(struct dw_xpcs *xpcs, int dev, u32 reg, |
| u16 mask, u16 set) |
| { |
| u32 reg_addr = mdiobus_c45_addr(dev, reg); |
| |
| return mdiodev_modify_changed(xpcs->mdiodev, reg_addr, mask, set); |
| } |
| |
| static int xpcs_read_vendor(struct dw_xpcs *xpcs, int dev, u32 reg) |
| { |
| return xpcs_read(xpcs, dev, DW_VENDOR | reg); |
| } |
| |
| static int xpcs_write_vendor(struct dw_xpcs *xpcs, int dev, int reg, |
| u16 val) |
| { |
| return xpcs_write(xpcs, dev, DW_VENDOR | reg, val); |
| } |
| |
| static int xpcs_read_vpcs(struct dw_xpcs *xpcs, int reg) |
| { |
| return xpcs_read_vendor(xpcs, MDIO_MMD_PCS, reg); |
| } |
| |
| static int xpcs_write_vpcs(struct dw_xpcs *xpcs, int reg, u16 val) |
| { |
| return xpcs_write_vendor(xpcs, MDIO_MMD_PCS, reg, val); |
| } |
| |
| static int xpcs_poll_reset(struct dw_xpcs *xpcs, int dev) |
| { |
| /* Poll until the reset bit clears (50ms per retry == 0.6 sec) */ |
| unsigned int retries = 12; |
| int ret; |
| |
| do { |
| msleep(50); |
| ret = xpcs_read(xpcs, dev, MDIO_CTRL1); |
| if (ret < 0) |
| return ret; |
| } while (ret & MDIO_CTRL1_RESET && --retries); |
| |
| return (ret & MDIO_CTRL1_RESET) ? -ETIMEDOUT : 0; |
| } |
| |
| static int xpcs_soft_reset(struct dw_xpcs *xpcs, |
| const struct xpcs_compat *compat) |
| { |
| int ret, dev; |
| |
| switch (compat->an_mode) { |
| case DW_AN_C73: |
| dev = MDIO_MMD_PCS; |
| break; |
| case DW_AN_C37_SGMII: |
| case DW_2500BASEX: |
| case DW_AN_C37_1000BASEX: |
| dev = MDIO_MMD_VEND2; |
| break; |
| default: |
| return -1; |
| } |
| |
| ret = xpcs_write(xpcs, dev, MDIO_CTRL1, MDIO_CTRL1_RESET); |
| if (ret < 0) |
| return ret; |
| |
| return xpcs_poll_reset(xpcs, dev); |
| } |
| |
| #define xpcs_warn(__xpcs, __state, __args...) \ |
| ({ \ |
| if ((__state)->link) \ |
| dev_warn(&(__xpcs)->mdiodev->dev, ##__args); \ |
| }) |
| |
| static int xpcs_read_fault_c73(struct dw_xpcs *xpcs, |
| struct phylink_link_state *state) |
| { |
| int ret; |
| |
| ret = xpcs_read(xpcs, MDIO_MMD_PCS, MDIO_STAT1); |
| if (ret < 0) |
| return ret; |
| |
| if (ret & MDIO_STAT1_FAULT) { |
| xpcs_warn(xpcs, state, "Link fault condition detected!\n"); |
| return -EFAULT; |
| } |
| |
| ret = xpcs_read(xpcs, MDIO_MMD_PCS, MDIO_STAT2); |
| if (ret < 0) |
| return ret; |
| |
| if (ret & MDIO_STAT2_RXFAULT) |
| xpcs_warn(xpcs, state, "Receiver fault detected!\n"); |
| if (ret & MDIO_STAT2_TXFAULT) |
| xpcs_warn(xpcs, state, "Transmitter fault detected!\n"); |
| |
| ret = xpcs_read_vendor(xpcs, MDIO_MMD_PCS, DW_VR_XS_PCS_DIG_STS); |
| if (ret < 0) |
| return ret; |
| |
| if (ret & DW_RXFIFO_ERR) { |
| xpcs_warn(xpcs, state, "FIFO fault condition detected!\n"); |
| return -EFAULT; |
| } |
| |
| ret = xpcs_read(xpcs, MDIO_MMD_PCS, MDIO_PCS_10GBRT_STAT1); |
| if (ret < 0) |
| return ret; |
| |
| if (!(ret & MDIO_PCS_10GBRT_STAT1_BLKLK)) |
| xpcs_warn(xpcs, state, "Link is not locked!\n"); |
| |
| ret = xpcs_read(xpcs, MDIO_MMD_PCS, MDIO_PCS_10GBRT_STAT2); |
| if (ret < 0) |
| return ret; |
| |
| if (ret & MDIO_PCS_10GBRT_STAT2_ERR) { |
| xpcs_warn(xpcs, state, "Link has errors!\n"); |
| return -EFAULT; |
| } |
| |
| return 0; |
| } |
| |
| static int xpcs_read_link_c73(struct dw_xpcs *xpcs, bool an) |
| { |
| bool link = true; |
| int ret; |
| |
| ret = xpcs_read(xpcs, MDIO_MMD_PCS, MDIO_STAT1); |
| if (ret < 0) |
| return ret; |
| |
| if (!(ret & MDIO_STAT1_LSTATUS)) |
| link = false; |
| |
| if (an) { |
| ret = xpcs_read(xpcs, MDIO_MMD_AN, MDIO_STAT1); |
| if (ret < 0) |
| return ret; |
| |
| if (!(ret & MDIO_STAT1_LSTATUS)) |
| link = false; |
| } |
| |
| return link; |
| } |
| |
| static int xpcs_get_max_usxgmii_speed(const unsigned long *supported) |
| { |
| int max = SPEED_UNKNOWN; |
| |
| if (phylink_test(supported, 1000baseKX_Full)) |
| max = SPEED_1000; |
| if (phylink_test(supported, 2500baseX_Full)) |
| max = SPEED_2500; |
| if (phylink_test(supported, 10000baseKX4_Full)) |
| max = SPEED_10000; |
| if (phylink_test(supported, 10000baseKR_Full)) |
| max = SPEED_10000; |
| |
| return max; |
| } |
| |
| static void xpcs_config_usxgmii(struct dw_xpcs *xpcs, int speed) |
| { |
| int ret, speed_sel; |
| |
| switch (speed) { |
| case SPEED_10: |
| speed_sel = DW_USXGMII_10; |
| break; |
| case SPEED_100: |
| speed_sel = DW_USXGMII_100; |
| break; |
| case SPEED_1000: |
| speed_sel = DW_USXGMII_1000; |
| break; |
| case SPEED_2500: |
| speed_sel = DW_USXGMII_2500; |
| break; |
| case SPEED_5000: |
| speed_sel = DW_USXGMII_5000; |
| break; |
| case SPEED_10000: |
| speed_sel = DW_USXGMII_10000; |
| break; |
| default: |
| /* Nothing to do here */ |
| return; |
| } |
| |
| ret = xpcs_read_vpcs(xpcs, MDIO_CTRL1); |
| if (ret < 0) |
| goto out; |
| |
| ret = xpcs_write_vpcs(xpcs, MDIO_CTRL1, ret | DW_USXGMII_EN); |
| if (ret < 0) |
| goto out; |
| |
| ret = xpcs_read(xpcs, MDIO_MMD_VEND2, MDIO_CTRL1); |
| if (ret < 0) |
| goto out; |
| |
| ret &= ~DW_USXGMII_SS_MASK; |
| ret |= speed_sel | DW_USXGMII_FULL; |
| |
| ret = xpcs_write(xpcs, MDIO_MMD_VEND2, MDIO_CTRL1, ret); |
| if (ret < 0) |
| goto out; |
| |
| ret = xpcs_read_vpcs(xpcs, MDIO_CTRL1); |
| if (ret < 0) |
| goto out; |
| |
| ret = xpcs_write_vpcs(xpcs, MDIO_CTRL1, ret | DW_USXGMII_RST); |
| if (ret < 0) |
| goto out; |
| |
| return; |
| |
| out: |
| pr_err("%s: XPCS access returned %pe\n", __func__, ERR_PTR(ret)); |
| } |
| |
| static int _xpcs_config_aneg_c73(struct dw_xpcs *xpcs, |
| const struct xpcs_compat *compat) |
| { |
| int ret, adv; |
| |
| /* By default, in USXGMII mode XPCS operates at 10G baud and |
| * replicates data to achieve lower speeds. Hereby, in this |
| * default configuration we need to advertise all supported |
| * modes and not only the ones we want to use. |
| */ |
| |
| /* SR_AN_ADV3 */ |
| adv = 0; |
| if (xpcs_linkmode_supported(compat, 2500baseX_Full)) |
| adv |= DW_C73_2500KX; |
| |
| /* TODO: 5000baseKR */ |
| |
| ret = xpcs_write(xpcs, MDIO_MMD_AN, DW_SR_AN_ADV3, adv); |
| if (ret < 0) |
| return ret; |
| |
| /* SR_AN_ADV2 */ |
| adv = 0; |
| if (xpcs_linkmode_supported(compat, 1000baseKX_Full)) |
| adv |= DW_C73_1000KX; |
| if (xpcs_linkmode_supported(compat, 10000baseKX4_Full)) |
| adv |= DW_C73_10000KX4; |
| if (xpcs_linkmode_supported(compat, 10000baseKR_Full)) |
| adv |= DW_C73_10000KR; |
| |
| ret = xpcs_write(xpcs, MDIO_MMD_AN, DW_SR_AN_ADV2, adv); |
| if (ret < 0) |
| return ret; |
| |
| /* SR_AN_ADV1 */ |
| adv = DW_C73_AN_ADV_SF; |
| if (xpcs_linkmode_supported(compat, Pause)) |
| adv |= DW_C73_PAUSE; |
| if (xpcs_linkmode_supported(compat, Asym_Pause)) |
| adv |= DW_C73_ASYM_PAUSE; |
| |
| return xpcs_write(xpcs, MDIO_MMD_AN, DW_SR_AN_ADV1, adv); |
| } |
| |
| static int xpcs_config_aneg_c73(struct dw_xpcs *xpcs, |
| const struct xpcs_compat *compat) |
| { |
| int ret; |
| |
| ret = _xpcs_config_aneg_c73(xpcs, compat); |
| if (ret < 0) |
| return ret; |
| |
| ret = xpcs_read(xpcs, MDIO_MMD_AN, MDIO_CTRL1); |
| if (ret < 0) |
| return ret; |
| |
| ret |= MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART; |
| |
| return xpcs_write(xpcs, MDIO_MMD_AN, MDIO_CTRL1, ret); |
| } |
| |
| static int xpcs_aneg_done_c73(struct dw_xpcs *xpcs, |
| struct phylink_link_state *state, |
| const struct xpcs_compat *compat) |
| { |
| int ret; |
| |
| ret = xpcs_read(xpcs, MDIO_MMD_AN, MDIO_STAT1); |
| if (ret < 0) |
| return ret; |
| |
| if (ret & MDIO_AN_STAT1_COMPLETE) { |
| ret = xpcs_read(xpcs, MDIO_MMD_AN, DW_SR_AN_LP_ABL1); |
| if (ret < 0) |
| return ret; |
| |
| /* Check if Aneg outcome is valid */ |
| if (!(ret & DW_C73_AN_ADV_SF)) { |
| xpcs_config_aneg_c73(xpcs, compat); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static int xpcs_read_lpa_c73(struct dw_xpcs *xpcs, |
| struct phylink_link_state *state) |
| { |
| int ret; |
| |
| ret = xpcs_read(xpcs, MDIO_MMD_AN, MDIO_STAT1); |
| if (ret < 0) |
| return ret; |
| |
| if (!(ret & MDIO_AN_STAT1_LPABLE)) { |
| phylink_clear(state->lp_advertising, Autoneg); |
| return 0; |
| } |
| |
| phylink_set(state->lp_advertising, Autoneg); |
| |
| /* Clause 73 outcome */ |
| ret = xpcs_read(xpcs, MDIO_MMD_AN, DW_SR_AN_LP_ABL3); |
| if (ret < 0) |
| return ret; |
| |
| if (ret & DW_C73_2500KX) |
| phylink_set(state->lp_advertising, 2500baseX_Full); |
| |
| ret = xpcs_read(xpcs, MDIO_MMD_AN, DW_SR_AN_LP_ABL2); |
| if (ret < 0) |
| return ret; |
| |
| if (ret & DW_C73_1000KX) |
| phylink_set(state->lp_advertising, 1000baseKX_Full); |
| if (ret & DW_C73_10000KX4) |
| phylink_set(state->lp_advertising, 10000baseKX4_Full); |
| if (ret & DW_C73_10000KR) |
| phylink_set(state->lp_advertising, 10000baseKR_Full); |
| |
| ret = xpcs_read(xpcs, MDIO_MMD_AN, DW_SR_AN_LP_ABL1); |
| if (ret < 0) |
| return ret; |
| |
| if (ret & DW_C73_PAUSE) |
| phylink_set(state->lp_advertising, Pause); |
| if (ret & DW_C73_ASYM_PAUSE) |
| phylink_set(state->lp_advertising, Asym_Pause); |
| |
| linkmode_and(state->lp_advertising, state->lp_advertising, |
| state->advertising); |
| return 0; |
| } |
| |
| static void xpcs_resolve_lpa_c73(struct dw_xpcs *xpcs, |
| struct phylink_link_state *state) |
| { |
| int max_speed = xpcs_get_max_usxgmii_speed(state->lp_advertising); |
| |
| state->pause = MLO_PAUSE_TX | MLO_PAUSE_RX; |
| state->speed = max_speed; |
| state->duplex = DUPLEX_FULL; |
| } |
| |
| static int xpcs_get_max_xlgmii_speed(struct dw_xpcs *xpcs, |
| struct phylink_link_state *state) |
| { |
| unsigned long *adv = state->advertising; |
| int speed = SPEED_UNKNOWN; |
| int bit; |
| |
| for_each_set_bit(bit, adv, __ETHTOOL_LINK_MODE_MASK_NBITS) { |
| int new_speed = SPEED_UNKNOWN; |
| |
| switch (bit) { |
| case ETHTOOL_LINK_MODE_25000baseCR_Full_BIT: |
| case ETHTOOL_LINK_MODE_25000baseKR_Full_BIT: |
| case ETHTOOL_LINK_MODE_25000baseSR_Full_BIT: |
| new_speed = SPEED_25000; |
| break; |
| case ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT: |
| case ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT: |
| case ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT: |
| case ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT: |
| new_speed = SPEED_40000; |
| break; |
| case ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT: |
| case ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT: |
| case ETHTOOL_LINK_MODE_50000baseSR2_Full_BIT: |
| case ETHTOOL_LINK_MODE_50000baseKR_Full_BIT: |
| case ETHTOOL_LINK_MODE_50000baseSR_Full_BIT: |
| case ETHTOOL_LINK_MODE_50000baseCR_Full_BIT: |
| case ETHTOOL_LINK_MODE_50000baseLR_ER_FR_Full_BIT: |
| case ETHTOOL_LINK_MODE_50000baseDR_Full_BIT: |
| new_speed = SPEED_50000; |
| break; |
| case ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT: |
| case ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT: |
| case ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT: |
| case ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT: |
| case ETHTOOL_LINK_MODE_100000baseKR2_Full_BIT: |
| case ETHTOOL_LINK_MODE_100000baseSR2_Full_BIT: |
| case ETHTOOL_LINK_MODE_100000baseCR2_Full_BIT: |
| case ETHTOOL_LINK_MODE_100000baseLR2_ER2_FR2_Full_BIT: |
| case ETHTOOL_LINK_MODE_100000baseDR2_Full_BIT: |
| new_speed = SPEED_100000; |
| break; |
| default: |
| continue; |
| } |
| |
| if (new_speed > speed) |
| speed = new_speed; |
| } |
| |
| return speed; |
| } |
| |
| static void xpcs_resolve_pma(struct dw_xpcs *xpcs, |
| struct phylink_link_state *state) |
| { |
| state->pause = MLO_PAUSE_TX | MLO_PAUSE_RX; |
| state->duplex = DUPLEX_FULL; |
| |
| switch (state->interface) { |
| case PHY_INTERFACE_MODE_10GKR: |
| state->speed = SPEED_10000; |
| break; |
| case PHY_INTERFACE_MODE_XLGMII: |
| state->speed = xpcs_get_max_xlgmii_speed(xpcs, state); |
| break; |
| default: |
| state->speed = SPEED_UNKNOWN; |
| break; |
| } |
| } |
| |
| static int xpcs_validate(struct phylink_pcs *pcs, unsigned long *supported, |
| const struct phylink_link_state *state) |
| { |
| __ETHTOOL_DECLARE_LINK_MODE_MASK(xpcs_supported) = { 0, }; |
| const struct xpcs_compat *compat; |
| struct dw_xpcs *xpcs; |
| int i; |
| |
| xpcs = phylink_pcs_to_xpcs(pcs); |
| compat = xpcs_find_compat(xpcs->id, state->interface); |
| |
| /* Populate the supported link modes for this PHY interface type. |
| * FIXME: what about the port modes and autoneg bit? This masks |
| * all those away. |
| */ |
| if (compat) |
| for (i = 0; compat->supported[i] != __ETHTOOL_LINK_MODE_MASK_NBITS; i++) |
| set_bit(compat->supported[i], xpcs_supported); |
| |
| linkmode_and(supported, supported, xpcs_supported); |
| |
| return 0; |
| } |
| |
| void xpcs_get_interfaces(struct dw_xpcs *xpcs, unsigned long *interfaces) |
| { |
| int i, j; |
| |
| for (i = 0; i < DW_XPCS_INTERFACE_MAX; i++) { |
| const struct xpcs_compat *compat = &xpcs->id->compat[i]; |
| |
| for (j = 0; j < compat->num_interfaces; j++) |
| if (compat->interface[j] < PHY_INTERFACE_MODE_MAX) |
| __set_bit(compat->interface[j], interfaces); |
| } |
| } |
| EXPORT_SYMBOL_GPL(xpcs_get_interfaces); |
| |
| int xpcs_config_eee(struct dw_xpcs *xpcs, int mult_fact_100ns, int enable) |
| { |
| int ret; |
| |
| ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_EEE_MCTRL0); |
| if (ret < 0) |
| return ret; |
| |
| if (enable) { |
| /* Enable EEE */ |
| ret = DW_VR_MII_EEE_LTX_EN | DW_VR_MII_EEE_LRX_EN | |
| DW_VR_MII_EEE_TX_QUIET_EN | DW_VR_MII_EEE_RX_QUIET_EN | |
| DW_VR_MII_EEE_TX_EN_CTRL | DW_VR_MII_EEE_RX_EN_CTRL | |
| mult_fact_100ns << DW_VR_MII_EEE_MULT_FACT_100NS_SHIFT; |
| } else { |
| ret &= ~(DW_VR_MII_EEE_LTX_EN | DW_VR_MII_EEE_LRX_EN | |
| DW_VR_MII_EEE_TX_QUIET_EN | DW_VR_MII_EEE_RX_QUIET_EN | |
| DW_VR_MII_EEE_TX_EN_CTRL | DW_VR_MII_EEE_RX_EN_CTRL | |
| DW_VR_MII_EEE_MULT_FACT_100NS); |
| } |
| |
| ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_EEE_MCTRL0, ret); |
| if (ret < 0) |
| return ret; |
| |
| ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_EEE_MCTRL1); |
| if (ret < 0) |
| return ret; |
| |
| if (enable) |
| ret |= DW_VR_MII_EEE_TRN_LPI; |
| else |
| ret &= ~DW_VR_MII_EEE_TRN_LPI; |
| |
| return xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_EEE_MCTRL1, ret); |
| } |
| EXPORT_SYMBOL_GPL(xpcs_config_eee); |
| |
| static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs, unsigned int mode) |
| { |
| int ret, mdio_ctrl; |
| |
| /* For AN for C37 SGMII mode, the settings are :- |
| * 1) VR_MII_MMD_CTRL Bit(12) [AN_ENABLE] = 0b (Disable SGMII AN in case |
| it is already enabled) |
| * 2) VR_MII_AN_CTRL Bit(2:1)[PCS_MODE] = 10b (SGMII AN) |
| * 3) VR_MII_AN_CTRL Bit(3) [TX_CONFIG] = 0b (MAC side SGMII) |
| * DW xPCS used with DW EQoS MAC is always MAC side SGMII. |
| * 4) VR_MII_DIG_CTRL1 Bit(9) [MAC_AUTO_SW] = 1b (Automatic |
| * speed/duplex mode change by HW after SGMII AN complete) |
| * 5) VR_MII_MMD_CTRL Bit(12) [AN_ENABLE] = 1b (Enable SGMII AN) |
| * |
| * Note: Since it is MAC side SGMII, there is no need to set |
| * SR_MII_AN_ADV. MAC side SGMII receives AN Tx Config from |
| * PHY about the link state change after C28 AN is completed |
| * between PHY and Link Partner. There is also no need to |
| * trigger AN restart for MAC-side SGMII. |
| */ |
| mdio_ctrl = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL); |
| if (mdio_ctrl < 0) |
| return mdio_ctrl; |
| |
| if (mdio_ctrl & AN_CL37_EN) { |
| ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL, |
| mdio_ctrl & ~AN_CL37_EN); |
| if (ret < 0) |
| return ret; |
| } |
| |
| ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_CTRL); |
| if (ret < 0) |
| return ret; |
| |
| ret &= ~(DW_VR_MII_PCS_MODE_MASK | DW_VR_MII_TX_CONFIG_MASK); |
| ret |= (DW_VR_MII_PCS_MODE_C37_SGMII << |
| DW_VR_MII_AN_CTRL_PCS_MODE_SHIFT & |
| DW_VR_MII_PCS_MODE_MASK); |
| ret |= (DW_VR_MII_TX_CONFIG_MAC_SIDE_SGMII << |
| DW_VR_MII_AN_CTRL_TX_CONFIG_SHIFT & |
| DW_VR_MII_TX_CONFIG_MASK); |
| ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_CTRL, ret); |
| if (ret < 0) |
| return ret; |
| |
| ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL1); |
| if (ret < 0) |
| return ret; |
| |
| if (phylink_autoneg_inband(mode)) |
| ret |= DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW; |
| else |
| ret &= ~DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW; |
| |
| ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL1, ret); |
| if (ret < 0) |
| return ret; |
| |
| if (phylink_autoneg_inband(mode)) |
| ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL, |
| mdio_ctrl | AN_CL37_EN); |
| |
| return ret; |
| } |
| |
| static int xpcs_config_aneg_c37_1000basex(struct dw_xpcs *xpcs, unsigned int mode, |
| const unsigned long *advertising) |
| { |
| phy_interface_t interface = PHY_INTERFACE_MODE_1000BASEX; |
| int ret, mdio_ctrl, adv; |
| bool changed = 0; |
| |
| /* According to Chap 7.12, to set 1000BASE-X C37 AN, AN must |
| * be disabled first:- |
| * 1) VR_MII_MMD_CTRL Bit(12)[AN_ENABLE] = 0b |
| * 2) VR_MII_AN_CTRL Bit(2:1)[PCS_MODE] = 00b (1000BASE-X C37) |
| */ |
| mdio_ctrl = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL); |
| if (mdio_ctrl < 0) |
| return mdio_ctrl; |
| |
| if (mdio_ctrl & AN_CL37_EN) { |
| ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL, |
| mdio_ctrl & ~AN_CL37_EN); |
| if (ret < 0) |
| return ret; |
| } |
| |
| ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_CTRL); |
| if (ret < 0) |
| return ret; |
| |
| ret &= ~DW_VR_MII_PCS_MODE_MASK; |
| ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_CTRL, ret); |
| if (ret < 0) |
| return ret; |
| |
| /* Check for advertising changes and update the C45 MII ADV |
| * register accordingly. |
| */ |
| adv = phylink_mii_c22_pcs_encode_advertisement(interface, |
| advertising); |
| if (adv >= 0) { |
| ret = xpcs_modify_changed(xpcs, MDIO_MMD_VEND2, |
| MII_ADVERTISE, 0xffff, adv); |
| if (ret < 0) |
| return ret; |
| |
| changed = ret; |
| } |
| |
| /* Clear CL37 AN complete status */ |
| ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS, 0); |
| if (ret < 0) |
| return ret; |
| |
| if (phylink_autoneg_inband(mode) && |
| linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, advertising)) { |
| ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL, |
| mdio_ctrl | AN_CL37_EN); |
| if (ret < 0) |
| return ret; |
| } |
| |
| return changed; |
| } |
| |
| static int xpcs_config_2500basex(struct dw_xpcs *xpcs) |
| { |
| int ret; |
| |
| ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL1); |
| if (ret < 0) |
| return ret; |
| ret |= DW_VR_MII_DIG_CTRL1_2G5_EN; |
| ret &= ~DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW; |
| ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL1, ret); |
| if (ret < 0) |
| return ret; |
| |
| ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL); |
| if (ret < 0) |
| return ret; |
| ret &= ~AN_CL37_EN; |
| ret |= SGMII_SPEED_SS6; |
| ret &= ~SGMII_SPEED_SS13; |
| return xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL, ret); |
| } |
| |
| int xpcs_do_config(struct dw_xpcs *xpcs, phy_interface_t interface, |
| unsigned int mode, const unsigned long *advertising) |
| { |
| const struct xpcs_compat *compat; |
| int ret; |
| |
| compat = xpcs_find_compat(xpcs->id, interface); |
| if (!compat) |
| return -ENODEV; |
| |
| switch (compat->an_mode) { |
| case DW_AN_C73: |
| if (phylink_autoneg_inband(mode)) { |
| ret = xpcs_config_aneg_c73(xpcs, compat); |
| if (ret) |
| return ret; |
| } |
| break; |
| case DW_AN_C37_SGMII: |
| ret = xpcs_config_aneg_c37_sgmii(xpcs, mode); |
| if (ret) |
| return ret; |
| break; |
| case DW_AN_C37_1000BASEX: |
| ret = xpcs_config_aneg_c37_1000basex(xpcs, mode, |
| advertising); |
| if (ret) |
| return ret; |
| break; |
| case DW_2500BASEX: |
| ret = xpcs_config_2500basex(xpcs); |
| if (ret) |
| return ret; |
| break; |
| default: |
| return -1; |
| } |
| |
| if (compat->pma_config) { |
| ret = compat->pma_config(xpcs); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(xpcs_do_config); |
| |
| static int xpcs_config(struct phylink_pcs *pcs, unsigned int mode, |
| phy_interface_t interface, |
| const unsigned long *advertising, |
| bool permit_pause_to_mac) |
| { |
| struct dw_xpcs *xpcs = phylink_pcs_to_xpcs(pcs); |
| |
| return xpcs_do_config(xpcs, interface, mode, advertising); |
| } |
| |
| static int xpcs_get_state_c73(struct dw_xpcs *xpcs, |
| struct phylink_link_state *state, |
| const struct xpcs_compat *compat) |
| { |
| int ret; |
| |
| /* Link needs to be read first ... */ |
| state->link = xpcs_read_link_c73(xpcs, state->an_enabled) > 0 ? 1 : 0; |
| |
| /* ... and then we check the faults. */ |
| ret = xpcs_read_fault_c73(xpcs, state); |
| if (ret) { |
| ret = xpcs_soft_reset(xpcs, compat); |
| if (ret) |
| return ret; |
| |
| state->link = 0; |
| |
| return xpcs_do_config(xpcs, state->interface, MLO_AN_INBAND, NULL); |
| } |
| |
| if (state->an_enabled && xpcs_aneg_done_c73(xpcs, state, compat)) { |
| state->an_complete = true; |
| xpcs_read_lpa_c73(xpcs, state); |
| xpcs_resolve_lpa_c73(xpcs, state); |
| } else if (state->an_enabled) { |
| state->link = 0; |
| } else if (state->link) { |
| xpcs_resolve_pma(xpcs, state); |
| } |
| |
| return 0; |
| } |
| |
| static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs, |
| struct phylink_link_state *state) |
| { |
| int ret; |
| |
| /* Reset link_state */ |
| state->link = false; |
| state->speed = SPEED_UNKNOWN; |
| state->duplex = DUPLEX_UNKNOWN; |
| state->pause = 0; |
| |
| /* For C37 SGMII mode, we check DW_VR_MII_AN_INTR_STS for link |
| * status, speed and duplex. |
| */ |
| ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS); |
| if (ret < 0) |
| return ret; |
| |
| if (ret & DW_VR_MII_C37_ANSGM_SP_LNKSTS) { |
| int speed_value; |
| |
| state->link = true; |
| |
| speed_value = (ret & DW_VR_MII_AN_STS_C37_ANSGM_SP) >> |
| DW_VR_MII_AN_STS_C37_ANSGM_SP_SHIFT; |
| if (speed_value == DW_VR_MII_C37_ANSGM_SP_1000) |
| state->speed = SPEED_1000; |
| else if (speed_value == DW_VR_MII_C37_ANSGM_SP_100) |
| state->speed = SPEED_100; |
| else |
| state->speed = SPEED_10; |
| |
| if (ret & DW_VR_MII_AN_STS_C37_ANSGM_FD) |
| state->duplex = DUPLEX_FULL; |
| else |
| state->duplex = DUPLEX_HALF; |
| } |
| |
| return 0; |
| } |
| |
| static int xpcs_get_state_c37_1000basex(struct dw_xpcs *xpcs, |
| struct phylink_link_state *state) |
| { |
| int lpa, bmsr; |
| |
| if (state->an_enabled) { |
| /* Reset link state */ |
| state->link = false; |
| |
| lpa = xpcs_read(xpcs, MDIO_MMD_VEND2, MII_LPA); |
| if (lpa < 0 || lpa & LPA_RFAULT) |
| return lpa; |
| |
| bmsr = xpcs_read(xpcs, MDIO_MMD_VEND2, MII_BMSR); |
| if (bmsr < 0) |
| return bmsr; |
| |
| phylink_mii_c22_pcs_decode_state(state, bmsr, lpa); |
| } |
| |
| return 0; |
| } |
| |
| static void xpcs_get_state(struct phylink_pcs *pcs, |
| struct phylink_link_state *state) |
| { |
| struct dw_xpcs *xpcs = phylink_pcs_to_xpcs(pcs); |
| const struct xpcs_compat *compat; |
| int ret; |
| |
| compat = xpcs_find_compat(xpcs->id, state->interface); |
| if (!compat) |
| return; |
| |
| switch (compat->an_mode) { |
| case DW_AN_C73: |
| ret = xpcs_get_state_c73(xpcs, state, compat); |
| if (ret) { |
| pr_err("xpcs_get_state_c73 returned %pe\n", |
| ERR_PTR(ret)); |
| return; |
| } |
| break; |
| case DW_AN_C37_SGMII: |
| ret = xpcs_get_state_c37_sgmii(xpcs, state); |
| if (ret) { |
| pr_err("xpcs_get_state_c37_sgmii returned %pe\n", |
| ERR_PTR(ret)); |
| } |
| break; |
| case DW_AN_C37_1000BASEX: |
| ret = xpcs_get_state_c37_1000basex(xpcs, state); |
| if (ret) { |
| pr_err("xpcs_get_state_c37_1000basex returned %pe\n", |
| ERR_PTR(ret)); |
| } |
| break; |
| default: |
| return; |
| } |
| } |
| |
| static void xpcs_link_up_sgmii(struct dw_xpcs *xpcs, unsigned int mode, |
| int speed, int duplex) |
| { |
| int val, ret; |
| |
| if (phylink_autoneg_inband(mode)) |
| return; |
| |
| val = mii_bmcr_encode_fixed(speed, duplex); |
| ret = xpcs_write(xpcs, MDIO_MMD_VEND2, MDIO_CTRL1, val); |
| if (ret) |
| pr_err("%s: xpcs_write returned %pe\n", __func__, ERR_PTR(ret)); |
| } |
| |
| static void xpcs_link_up_1000basex(struct dw_xpcs *xpcs, unsigned int mode, |
| int speed, int duplex) |
| { |
| int val, ret; |
| |
| if (phylink_autoneg_inband(mode)) |
| return; |
| |
| switch (speed) { |
| case SPEED_1000: |
| val = BMCR_SPEED1000; |
| break; |
| case SPEED_100: |
| case SPEED_10: |
| default: |
| pr_err("%s: speed = %d\n", __func__, speed); |
| return; |
| } |
| |
| if (duplex == DUPLEX_FULL) |
| val |= BMCR_FULLDPLX; |
| else |
| pr_err("%s: half duplex not supported\n", __func__); |
| |
| ret = xpcs_write(xpcs, MDIO_MMD_VEND2, MDIO_CTRL1, val); |
| if (ret) |
| pr_err("%s: xpcs_write returned %pe\n", __func__, ERR_PTR(ret)); |
| } |
| |
| void xpcs_link_up(struct phylink_pcs *pcs, unsigned int mode, |
| phy_interface_t interface, int speed, int duplex) |
| { |
| struct dw_xpcs *xpcs = phylink_pcs_to_xpcs(pcs); |
| |
| if (interface == PHY_INTERFACE_MODE_USXGMII) |
| return xpcs_config_usxgmii(xpcs, speed); |
| if (interface == PHY_INTERFACE_MODE_SGMII) |
| return xpcs_link_up_sgmii(xpcs, mode, speed, duplex); |
| if (interface == PHY_INTERFACE_MODE_1000BASEX) |
| return xpcs_link_up_1000basex(xpcs, mode, speed, duplex); |
| } |
| EXPORT_SYMBOL_GPL(xpcs_link_up); |
| |
| static void xpcs_an_restart(struct phylink_pcs *pcs) |
| { |
| struct dw_xpcs *xpcs = phylink_pcs_to_xpcs(pcs); |
| int ret; |
| |
| ret = xpcs_read(xpcs, MDIO_MMD_VEND2, MDIO_CTRL1); |
| if (ret >= 0) { |
| ret |= BMCR_ANRESTART; |
| xpcs_write(xpcs, MDIO_MMD_VEND2, MDIO_CTRL1, ret); |
| } |
| } |
| |
| static u32 xpcs_get_id(struct dw_xpcs *xpcs) |
| { |
| int ret; |
| u32 id; |
| |
| /* First, search C73 PCS using PCS MMD */ |
| ret = xpcs_read(xpcs, MDIO_MMD_PCS, MII_PHYSID1); |
| if (ret < 0) |
| return 0xffffffff; |
| |
| id = ret << 16; |
| |
| ret = xpcs_read(xpcs, MDIO_MMD_PCS, MII_PHYSID2); |
| if (ret < 0) |
| return 0xffffffff; |
| |
| /* If Device IDs are not all zeros or all ones, |
| * we found C73 AN-type device |
| */ |
| if ((id | ret) && (id | ret) != 0xffffffff) |
| return id | ret; |
| |
| /* Next, search C37 PCS using Vendor-Specific MII MMD */ |
| ret = xpcs_read(xpcs, MDIO_MMD_VEND2, MII_PHYSID1); |
| if (ret < 0) |
| return 0xffffffff; |
| |
| id = ret << 16; |
| |
| ret = xpcs_read(xpcs, MDIO_MMD_VEND2, MII_PHYSID2); |
| if (ret < 0) |
| return 0xffffffff; |
| |
| /* If Device IDs are not all zeros, we found C37 AN-type device */ |
| if (id | ret) |
| return id | ret; |
| |
| return 0xffffffff; |
| } |
| |
| static const struct xpcs_compat synopsys_xpcs_compat[DW_XPCS_INTERFACE_MAX] = { |
| [DW_XPCS_USXGMII] = { |
| .supported = xpcs_usxgmii_features, |
| .interface = xpcs_usxgmii_interfaces, |
| .num_interfaces = ARRAY_SIZE(xpcs_usxgmii_interfaces), |
| .an_mode = DW_AN_C73, |
| }, |
| [DW_XPCS_10GKR] = { |
| .supported = xpcs_10gkr_features, |
| .interface = xpcs_10gkr_interfaces, |
| .num_interfaces = ARRAY_SIZE(xpcs_10gkr_interfaces), |
| .an_mode = DW_AN_C73, |
| }, |
| [DW_XPCS_XLGMII] = { |
| .supported = xpcs_xlgmii_features, |
| .interface = xpcs_xlgmii_interfaces, |
| .num_interfaces = ARRAY_SIZE(xpcs_xlgmii_interfaces), |
| .an_mode = DW_AN_C73, |
| }, |
| [DW_XPCS_SGMII] = { |
| .supported = xpcs_sgmii_features, |
| .interface = xpcs_sgmii_interfaces, |
| .num_interfaces = ARRAY_SIZE(xpcs_sgmii_interfaces), |
| .an_mode = DW_AN_C37_SGMII, |
| }, |
| [DW_XPCS_1000BASEX] = { |
| .supported = xpcs_1000basex_features, |
| .interface = xpcs_1000basex_interfaces, |
| .num_interfaces = ARRAY_SIZE(xpcs_1000basex_interfaces), |
| .an_mode = DW_AN_C37_1000BASEX, |
| }, |
| [DW_XPCS_2500BASEX] = { |
| .supported = xpcs_2500basex_features, |
| .interface = xpcs_2500basex_interfaces, |
| .num_interfaces = ARRAY_SIZE(xpcs_2500basex_features), |
| .an_mode = DW_2500BASEX, |
| }, |
| }; |
| |
| static const struct xpcs_compat nxp_sja1105_xpcs_compat[DW_XPCS_INTERFACE_MAX] = { |
| [DW_XPCS_SGMII] = { |
| .supported = xpcs_sgmii_features, |
| .interface = xpcs_sgmii_interfaces, |
| .num_interfaces = ARRAY_SIZE(xpcs_sgmii_interfaces), |
| .an_mode = DW_AN_C37_SGMII, |
| .pma_config = nxp_sja1105_sgmii_pma_config, |
| }, |
| }; |
| |
| static const struct xpcs_compat nxp_sja1110_xpcs_compat[DW_XPCS_INTERFACE_MAX] = { |
| [DW_XPCS_SGMII] = { |
| .supported = xpcs_sgmii_features, |
| .interface = xpcs_sgmii_interfaces, |
| .num_interfaces = ARRAY_SIZE(xpcs_sgmii_interfaces), |
| .an_mode = DW_AN_C37_SGMII, |
| .pma_config = nxp_sja1110_sgmii_pma_config, |
| }, |
| [DW_XPCS_2500BASEX] = { |
| .supported = xpcs_2500basex_features, |
| .interface = xpcs_2500basex_interfaces, |
| .num_interfaces = ARRAY_SIZE(xpcs_2500basex_interfaces), |
| .an_mode = DW_2500BASEX, |
| .pma_config = nxp_sja1110_2500basex_pma_config, |
| }, |
| }; |
| |
| static const struct xpcs_id xpcs_id_list[] = { |
| { |
| .id = SYNOPSYS_XPCS_ID, |
| .mask = SYNOPSYS_XPCS_MASK, |
| .compat = synopsys_xpcs_compat, |
| }, { |
| .id = NXP_SJA1105_XPCS_ID, |
| .mask = SYNOPSYS_XPCS_MASK, |
| .compat = nxp_sja1105_xpcs_compat, |
| }, { |
| .id = NXP_SJA1110_XPCS_ID, |
| .mask = SYNOPSYS_XPCS_MASK, |
| .compat = nxp_sja1110_xpcs_compat, |
| }, |
| }; |
| |
| static const struct phylink_pcs_ops xpcs_phylink_ops = { |
| .pcs_validate = xpcs_validate, |
| .pcs_config = xpcs_config, |
| .pcs_get_state = xpcs_get_state, |
| .pcs_an_restart = xpcs_an_restart, |
| .pcs_link_up = xpcs_link_up, |
| }; |
| |
| struct dw_xpcs *xpcs_create(struct mdio_device *mdiodev, |
| phy_interface_t interface) |
| { |
| struct dw_xpcs *xpcs; |
| u32 xpcs_id; |
| int i, ret; |
| |
| xpcs = kzalloc(sizeof(*xpcs), GFP_KERNEL); |
| if (!xpcs) |
| return ERR_PTR(-ENOMEM); |
| |
| xpcs->mdiodev = mdiodev; |
| |
| xpcs_id = xpcs_get_id(xpcs); |
| |
| for (i = 0; i < ARRAY_SIZE(xpcs_id_list); i++) { |
| const struct xpcs_id *entry = &xpcs_id_list[i]; |
| const struct xpcs_compat *compat; |
| |
| if ((xpcs_id & entry->mask) != entry->id) |
| continue; |
| |
| xpcs->id = entry; |
| |
| compat = xpcs_find_compat(entry, interface); |
| if (!compat) { |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| xpcs->pcs.ops = &xpcs_phylink_ops; |
| xpcs->pcs.poll = true; |
| |
| ret = xpcs_soft_reset(xpcs, compat); |
| if (ret) |
| goto out; |
| |
| return xpcs; |
| } |
| |
| ret = -ENODEV; |
| |
| out: |
| kfree(xpcs); |
| |
| return ERR_PTR(ret); |
| } |
| EXPORT_SYMBOL_GPL(xpcs_create); |
| |
| void xpcs_destroy(struct dw_xpcs *xpcs) |
| { |
| kfree(xpcs); |
| } |
| EXPORT_SYMBOL_GPL(xpcs_destroy); |
| |
| MODULE_LICENSE("GPL v2"); |