| /* |
| * Copyright 2015 Advanced Micro Devices, Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * Authors: AMD |
| * |
| */ |
| |
| /* The caprices of the preprocessor require that this be declared right here */ |
| #define CREATE_TRACE_POINTS |
| |
| #include "dm_services_types.h" |
| #include "dc.h" |
| #include "link_enc_cfg.h" |
| #include "dc/inc/core_types.h" |
| #include "dal_asic_id.h" |
| #include "dmub/dmub_srv.h" |
| #include "dc/inc/hw/dmcu.h" |
| #include "dc/inc/hw/abm.h" |
| #include "dc/dc_dmub_srv.h" |
| #include "dc/dc_edid_parser.h" |
| #include "dc/dc_stat.h" |
| #include "dc/dc_state.h" |
| #include "amdgpu_dm_trace.h" |
| #include "dpcd_defs.h" |
| #include "link/protocols/link_dpcd.h" |
| #include "link_service_types.h" |
| #include "link/protocols/link_dp_capability.h" |
| #include "link/protocols/link_ddc.h" |
| |
| #include "vid.h" |
| #include "amdgpu.h" |
| #include "amdgpu_display.h" |
| #include "amdgpu_ucode.h" |
| #include "atom.h" |
| #include "amdgpu_dm.h" |
| #include "amdgpu_dm_plane.h" |
| #include "amdgpu_dm_crtc.h" |
| #include "amdgpu_dm_hdcp.h" |
| #include <drm/display/drm_hdcp_helper.h> |
| #include "amdgpu_dm_wb.h" |
| #include "amdgpu_pm.h" |
| #include "amdgpu_atombios.h" |
| |
| #include "amd_shared.h" |
| #include "amdgpu_dm_irq.h" |
| #include "dm_helpers.h" |
| #include "amdgpu_dm_mst_types.h" |
| #if defined(CONFIG_DEBUG_FS) |
| #include "amdgpu_dm_debugfs.h" |
| #endif |
| #include "amdgpu_dm_psr.h" |
| #include "amdgpu_dm_replay.h" |
| |
| #include "ivsrcid/ivsrcid_vislands30.h" |
| |
| #include <linux/backlight.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/types.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/pci.h> |
| #include <linux/power_supply.h> |
| #include <linux/firmware.h> |
| #include <linux/component.h> |
| #include <linux/dmi.h> |
| #include <linux/sort.h> |
| |
| #include <drm/display/drm_dp_mst_helper.h> |
| #include <drm/display/drm_hdmi_helper.h> |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_atomic_uapi.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_blend.h> |
| #include <drm/drm_fixed.h> |
| #include <drm/drm_fourcc.h> |
| #include <drm/drm_edid.h> |
| #include <drm/drm_eld.h> |
| #include <drm/drm_vblank.h> |
| #include <drm/drm_audio_component.h> |
| #include <drm/drm_gem_atomic_helper.h> |
| |
| #include <acpi/video.h> |
| |
| #include "ivsrcid/dcn/irqsrcs_dcn_1_0.h" |
| |
| #include "dcn/dcn_1_0_offset.h" |
| #include "dcn/dcn_1_0_sh_mask.h" |
| #include "soc15_hw_ip.h" |
| #include "soc15_common.h" |
| #include "vega10_ip_offset.h" |
| |
| #include "gc/gc_11_0_0_offset.h" |
| #include "gc/gc_11_0_0_sh_mask.h" |
| |
| #include "modules/inc/mod_freesync.h" |
| #include "modules/power/power_helpers.h" |
| |
| #define FIRMWARE_RENOIR_DMUB "amdgpu/renoir_dmcub.bin" |
| MODULE_FIRMWARE(FIRMWARE_RENOIR_DMUB); |
| #define FIRMWARE_SIENNA_CICHLID_DMUB "amdgpu/sienna_cichlid_dmcub.bin" |
| MODULE_FIRMWARE(FIRMWARE_SIENNA_CICHLID_DMUB); |
| #define FIRMWARE_NAVY_FLOUNDER_DMUB "amdgpu/navy_flounder_dmcub.bin" |
| MODULE_FIRMWARE(FIRMWARE_NAVY_FLOUNDER_DMUB); |
| #define FIRMWARE_GREEN_SARDINE_DMUB "amdgpu/green_sardine_dmcub.bin" |
| MODULE_FIRMWARE(FIRMWARE_GREEN_SARDINE_DMUB); |
| #define FIRMWARE_VANGOGH_DMUB "amdgpu/vangogh_dmcub.bin" |
| MODULE_FIRMWARE(FIRMWARE_VANGOGH_DMUB); |
| #define FIRMWARE_DIMGREY_CAVEFISH_DMUB "amdgpu/dimgrey_cavefish_dmcub.bin" |
| MODULE_FIRMWARE(FIRMWARE_DIMGREY_CAVEFISH_DMUB); |
| #define FIRMWARE_BEIGE_GOBY_DMUB "amdgpu/beige_goby_dmcub.bin" |
| MODULE_FIRMWARE(FIRMWARE_BEIGE_GOBY_DMUB); |
| #define FIRMWARE_YELLOW_CARP_DMUB "amdgpu/yellow_carp_dmcub.bin" |
| MODULE_FIRMWARE(FIRMWARE_YELLOW_CARP_DMUB); |
| #define FIRMWARE_DCN_314_DMUB "amdgpu/dcn_3_1_4_dmcub.bin" |
| MODULE_FIRMWARE(FIRMWARE_DCN_314_DMUB); |
| #define FIRMWARE_DCN_315_DMUB "amdgpu/dcn_3_1_5_dmcub.bin" |
| MODULE_FIRMWARE(FIRMWARE_DCN_315_DMUB); |
| #define FIRMWARE_DCN316_DMUB "amdgpu/dcn_3_1_6_dmcub.bin" |
| MODULE_FIRMWARE(FIRMWARE_DCN316_DMUB); |
| |
| #define FIRMWARE_DCN_V3_2_0_DMCUB "amdgpu/dcn_3_2_0_dmcub.bin" |
| MODULE_FIRMWARE(FIRMWARE_DCN_V3_2_0_DMCUB); |
| #define FIRMWARE_DCN_V3_2_1_DMCUB "amdgpu/dcn_3_2_1_dmcub.bin" |
| MODULE_FIRMWARE(FIRMWARE_DCN_V3_2_1_DMCUB); |
| |
| #define FIRMWARE_RAVEN_DMCU "amdgpu/raven_dmcu.bin" |
| MODULE_FIRMWARE(FIRMWARE_RAVEN_DMCU); |
| |
| #define FIRMWARE_NAVI12_DMCU "amdgpu/navi12_dmcu.bin" |
| MODULE_FIRMWARE(FIRMWARE_NAVI12_DMCU); |
| |
| #define FIRMWARE_DCN_35_DMUB "amdgpu/dcn_3_5_dmcub.bin" |
| MODULE_FIRMWARE(FIRMWARE_DCN_35_DMUB); |
| |
| #define FIRMWARE_DCN_351_DMUB "amdgpu/dcn_3_5_1_dmcub.bin" |
| MODULE_FIRMWARE(FIRMWARE_DCN_351_DMUB); |
| |
| #define FIRMWARE_DCN_401_DMUB "amdgpu/dcn_4_0_1_dmcub.bin" |
| MODULE_FIRMWARE(FIRMWARE_DCN_401_DMUB); |
| |
| /* Number of bytes in PSP header for firmware. */ |
| #define PSP_HEADER_BYTES 0x100 |
| |
| /* Number of bytes in PSP footer for firmware. */ |
| #define PSP_FOOTER_BYTES 0x100 |
| |
| /** |
| * DOC: overview |
| * |
| * The AMDgpu display manager, **amdgpu_dm** (or even simpler, |
| * **dm**) sits between DRM and DC. It acts as a liaison, converting DRM |
| * requests into DC requests, and DC responses into DRM responses. |
| * |
| * The root control structure is &struct amdgpu_display_manager. |
| */ |
| |
| /* basic init/fini API */ |
| static int amdgpu_dm_init(struct amdgpu_device *adev); |
| static void amdgpu_dm_fini(struct amdgpu_device *adev); |
| static bool is_freesync_video_mode(const struct drm_display_mode *mode, struct amdgpu_dm_connector *aconnector); |
| |
| static enum drm_mode_subconnector get_subconnector_type(struct dc_link *link) |
| { |
| switch (link->dpcd_caps.dongle_type) { |
| case DISPLAY_DONGLE_NONE: |
| return DRM_MODE_SUBCONNECTOR_Native; |
| case DISPLAY_DONGLE_DP_VGA_CONVERTER: |
| return DRM_MODE_SUBCONNECTOR_VGA; |
| case DISPLAY_DONGLE_DP_DVI_CONVERTER: |
| case DISPLAY_DONGLE_DP_DVI_DONGLE: |
| return DRM_MODE_SUBCONNECTOR_DVID; |
| case DISPLAY_DONGLE_DP_HDMI_CONVERTER: |
| case DISPLAY_DONGLE_DP_HDMI_DONGLE: |
| return DRM_MODE_SUBCONNECTOR_HDMIA; |
| case DISPLAY_DONGLE_DP_HDMI_MISMATCHED_DONGLE: |
| default: |
| return DRM_MODE_SUBCONNECTOR_Unknown; |
| } |
| } |
| |
| static void update_subconnector_property(struct amdgpu_dm_connector *aconnector) |
| { |
| struct dc_link *link = aconnector->dc_link; |
| struct drm_connector *connector = &aconnector->base; |
| enum drm_mode_subconnector subconnector = DRM_MODE_SUBCONNECTOR_Unknown; |
| |
| if (connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) |
| return; |
| |
| if (aconnector->dc_sink) |
| subconnector = get_subconnector_type(link); |
| |
| drm_object_property_set_value(&connector->base, |
| connector->dev->mode_config.dp_subconnector_property, |
| subconnector); |
| } |
| |
| /* |
| * initializes drm_device display related structures, based on the information |
| * provided by DAL. The drm strcutures are: drm_crtc, drm_connector, |
| * drm_encoder, drm_mode_config |
| * |
| * Returns 0 on success |
| */ |
| static int amdgpu_dm_initialize_drm_device(struct amdgpu_device *adev); |
| /* removes and deallocates the drm structures, created by the above function */ |
| static void amdgpu_dm_destroy_drm_device(struct amdgpu_display_manager *dm); |
| |
| static int amdgpu_dm_connector_init(struct amdgpu_display_manager *dm, |
| struct amdgpu_dm_connector *amdgpu_dm_connector, |
| u32 link_index, |
| struct amdgpu_encoder *amdgpu_encoder); |
| static int amdgpu_dm_encoder_init(struct drm_device *dev, |
| struct amdgpu_encoder *aencoder, |
| uint32_t link_index); |
| |
| static int amdgpu_dm_connector_get_modes(struct drm_connector *connector); |
| |
| static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state); |
| |
| static int amdgpu_dm_atomic_check(struct drm_device *dev, |
| struct drm_atomic_state *state); |
| |
| static void handle_hpd_irq_helper(struct amdgpu_dm_connector *aconnector); |
| static void handle_hpd_rx_irq(void *param); |
| |
| static bool |
| is_timing_unchanged_for_freesync(struct drm_crtc_state *old_crtc_state, |
| struct drm_crtc_state *new_crtc_state); |
| /* |
| * dm_vblank_get_counter |
| * |
| * @brief |
| * Get counter for number of vertical blanks |
| * |
| * @param |
| * struct amdgpu_device *adev - [in] desired amdgpu device |
| * int disp_idx - [in] which CRTC to get the counter from |
| * |
| * @return |
| * Counter for vertical blanks |
| */ |
| static u32 dm_vblank_get_counter(struct amdgpu_device *adev, int crtc) |
| { |
| struct amdgpu_crtc *acrtc = NULL; |
| |
| if (crtc >= adev->mode_info.num_crtc) |
| return 0; |
| |
| acrtc = adev->mode_info.crtcs[crtc]; |
| |
| if (!acrtc->dm_irq_params.stream) { |
| DRM_ERROR("dc_stream_state is NULL for crtc '%d'!\n", |
| crtc); |
| return 0; |
| } |
| |
| return dc_stream_get_vblank_counter(acrtc->dm_irq_params.stream); |
| } |
| |
| static int dm_crtc_get_scanoutpos(struct amdgpu_device *adev, int crtc, |
| u32 *vbl, u32 *position) |
| { |
| u32 v_blank_start = 0, v_blank_end = 0, h_position = 0, v_position = 0; |
| struct amdgpu_crtc *acrtc = NULL; |
| struct dc *dc = adev->dm.dc; |
| |
| if ((crtc < 0) || (crtc >= adev->mode_info.num_crtc)) |
| return -EINVAL; |
| |
| acrtc = adev->mode_info.crtcs[crtc]; |
| |
| if (!acrtc->dm_irq_params.stream) { |
| DRM_ERROR("dc_stream_state is NULL for crtc '%d'!\n", |
| crtc); |
| return 0; |
| } |
| |
| if (dc && dc->caps.ips_support && dc->idle_optimizations_allowed) |
| dc_allow_idle_optimizations(dc, false); |
| |
| /* |
| * TODO rework base driver to use values directly. |
| * for now parse it back into reg-format |
| */ |
| dc_stream_get_scanoutpos(acrtc->dm_irq_params.stream, |
| &v_blank_start, |
| &v_blank_end, |
| &h_position, |
| &v_position); |
| |
| *position = v_position | (h_position << 16); |
| *vbl = v_blank_start | (v_blank_end << 16); |
| |
| return 0; |
| } |
| |
| static bool dm_is_idle(void *handle) |
| { |
| /* XXX todo */ |
| return true; |
| } |
| |
| static int dm_wait_for_idle(void *handle) |
| { |
| /* XXX todo */ |
| return 0; |
| } |
| |
| static bool dm_check_soft_reset(void *handle) |
| { |
| return false; |
| } |
| |
| static int dm_soft_reset(void *handle) |
| { |
| /* XXX todo */ |
| return 0; |
| } |
| |
| static struct amdgpu_crtc * |
| get_crtc_by_otg_inst(struct amdgpu_device *adev, |
| int otg_inst) |
| { |
| struct drm_device *dev = adev_to_drm(adev); |
| struct drm_crtc *crtc; |
| struct amdgpu_crtc *amdgpu_crtc; |
| |
| if (WARN_ON(otg_inst == -1)) |
| return adev->mode_info.crtcs[0]; |
| |
| list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { |
| amdgpu_crtc = to_amdgpu_crtc(crtc); |
| |
| if (amdgpu_crtc->otg_inst == otg_inst) |
| return amdgpu_crtc; |
| } |
| |
| return NULL; |
| } |
| |
| static inline bool is_dc_timing_adjust_needed(struct dm_crtc_state *old_state, |
| struct dm_crtc_state *new_state) |
| { |
| if (new_state->freesync_config.state == VRR_STATE_ACTIVE_FIXED) |
| return true; |
| else if (amdgpu_dm_crtc_vrr_active(old_state) != amdgpu_dm_crtc_vrr_active(new_state)) |
| return true; |
| else |
| return false; |
| } |
| |
| /* |
| * DC will program planes with their z-order determined by their ordering |
| * in the dc_surface_updates array. This comparator is used to sort them |
| * by descending zpos. |
| */ |
| static int dm_plane_layer_index_cmp(const void *a, const void *b) |
| { |
| const struct dc_surface_update *sa = (struct dc_surface_update *)a; |
| const struct dc_surface_update *sb = (struct dc_surface_update *)b; |
| |
| /* Sort by descending dc_plane layer_index (i.e. normalized_zpos) */ |
| return sb->surface->layer_index - sa->surface->layer_index; |
| } |
| |
| /** |
| * update_planes_and_stream_adapter() - Send planes to be updated in DC |
| * |
| * DC has a generic way to update planes and stream via |
| * dc_update_planes_and_stream function; however, DM might need some |
| * adjustments and preparation before calling it. This function is a wrapper |
| * for the dc_update_planes_and_stream that does any required configuration |
| * before passing control to DC. |
| * |
| * @dc: Display Core control structure |
| * @update_type: specify whether it is FULL/MEDIUM/FAST update |
| * @planes_count: planes count to update |
| * @stream: stream state |
| * @stream_update: stream update |
| * @array_of_surface_update: dc surface update pointer |
| * |
| */ |
| static inline bool update_planes_and_stream_adapter(struct dc *dc, |
| int update_type, |
| int planes_count, |
| struct dc_stream_state *stream, |
| struct dc_stream_update *stream_update, |
| struct dc_surface_update *array_of_surface_update) |
| { |
| sort(array_of_surface_update, planes_count, |
| sizeof(*array_of_surface_update), dm_plane_layer_index_cmp, NULL); |
| |
| /* |
| * Previous frame finished and HW is ready for optimization. |
| */ |
| if (update_type == UPDATE_TYPE_FAST) |
| dc_post_update_surfaces_to_stream(dc); |
| |
| return dc_update_planes_and_stream(dc, |
| array_of_surface_update, |
| planes_count, |
| stream, |
| stream_update); |
| } |
| |
| /** |
| * dm_pflip_high_irq() - Handle pageflip interrupt |
| * @interrupt_params: ignored |
| * |
| * Handles the pageflip interrupt by notifying all interested parties |
| * that the pageflip has been completed. |
| */ |
| static void dm_pflip_high_irq(void *interrupt_params) |
| { |
| struct amdgpu_crtc *amdgpu_crtc; |
| struct common_irq_params *irq_params = interrupt_params; |
| struct amdgpu_device *adev = irq_params->adev; |
| struct drm_device *dev = adev_to_drm(adev); |
| unsigned long flags; |
| struct drm_pending_vblank_event *e; |
| u32 vpos, hpos, v_blank_start, v_blank_end; |
| bool vrr_active; |
| |
| amdgpu_crtc = get_crtc_by_otg_inst(adev, irq_params->irq_src - IRQ_TYPE_PFLIP); |
| |
| /* IRQ could occur when in initial stage */ |
| /* TODO work and BO cleanup */ |
| if (amdgpu_crtc == NULL) { |
| drm_dbg_state(dev, "CRTC is null, returning.\n"); |
| return; |
| } |
| |
| spin_lock_irqsave(&adev_to_drm(adev)->event_lock, flags); |
| |
| if (amdgpu_crtc->pflip_status != AMDGPU_FLIP_SUBMITTED) { |
| drm_dbg_state(dev, |
| "amdgpu_crtc->pflip_status = %d != AMDGPU_FLIP_SUBMITTED(%d) on crtc:%d[%p]\n", |
| amdgpu_crtc->pflip_status, AMDGPU_FLIP_SUBMITTED, |
| amdgpu_crtc->crtc_id, amdgpu_crtc); |
| spin_unlock_irqrestore(&adev_to_drm(adev)->event_lock, flags); |
| return; |
| } |
| |
| /* page flip completed. */ |
| e = amdgpu_crtc->event; |
| amdgpu_crtc->event = NULL; |
| |
| WARN_ON(!e); |
| |
| vrr_active = amdgpu_dm_crtc_vrr_active_irq(amdgpu_crtc); |
| |
| /* Fixed refresh rate, or VRR scanout position outside front-porch? */ |
| if (!vrr_active || |
| !dc_stream_get_scanoutpos(amdgpu_crtc->dm_irq_params.stream, &v_blank_start, |
| &v_blank_end, &hpos, &vpos) || |
| (vpos < v_blank_start)) { |
| /* Update to correct count and vblank timestamp if racing with |
| * vblank irq. This also updates to the correct vblank timestamp |
| * even in VRR mode, as scanout is past the front-porch atm. |
| */ |
| drm_crtc_accurate_vblank_count(&amdgpu_crtc->base); |
| |
| /* Wake up userspace by sending the pageflip event with proper |
| * count and timestamp of vblank of flip completion. |
| */ |
| if (e) { |
| drm_crtc_send_vblank_event(&amdgpu_crtc->base, e); |
| |
| /* Event sent, so done with vblank for this flip */ |
| drm_crtc_vblank_put(&amdgpu_crtc->base); |
| } |
| } else if (e) { |
| /* VRR active and inside front-porch: vblank count and |
| * timestamp for pageflip event will only be up to date after |
| * drm_crtc_handle_vblank() has been executed from late vblank |
| * irq handler after start of back-porch (vline 0). We queue the |
| * pageflip event for send-out by drm_crtc_handle_vblank() with |
| * updated timestamp and count, once it runs after us. |
| * |
| * We need to open-code this instead of using the helper |
| * drm_crtc_arm_vblank_event(), as that helper would |
| * call drm_crtc_accurate_vblank_count(), which we must |
| * not call in VRR mode while we are in front-porch! |
| */ |
| |
| /* sequence will be replaced by real count during send-out. */ |
| e->sequence = drm_crtc_vblank_count(&amdgpu_crtc->base); |
| e->pipe = amdgpu_crtc->crtc_id; |
| |
| list_add_tail(&e->base.link, &adev_to_drm(adev)->vblank_event_list); |
| e = NULL; |
| } |
| |
| /* Keep track of vblank of this flip for flip throttling. We use the |
| * cooked hw counter, as that one incremented at start of this vblank |
| * of pageflip completion, so last_flip_vblank is the forbidden count |
| * for queueing new pageflips if vsync + VRR is enabled. |
| */ |
| amdgpu_crtc->dm_irq_params.last_flip_vblank = |
| amdgpu_get_vblank_counter_kms(&amdgpu_crtc->base); |
| |
| amdgpu_crtc->pflip_status = AMDGPU_FLIP_NONE; |
| spin_unlock_irqrestore(&adev_to_drm(adev)->event_lock, flags); |
| |
| drm_dbg_state(dev, |
| "crtc:%d[%p], pflip_stat:AMDGPU_FLIP_NONE, vrr[%d]-fp %d\n", |
| amdgpu_crtc->crtc_id, amdgpu_crtc, vrr_active, (int)!e); |
| } |
| |
| static void dm_vupdate_high_irq(void *interrupt_params) |
| { |
| struct common_irq_params *irq_params = interrupt_params; |
| struct amdgpu_device *adev = irq_params->adev; |
| struct amdgpu_crtc *acrtc; |
| struct drm_device *drm_dev; |
| struct drm_vblank_crtc *vblank; |
| ktime_t frame_duration_ns, previous_timestamp; |
| unsigned long flags; |
| int vrr_active; |
| |
| acrtc = get_crtc_by_otg_inst(adev, irq_params->irq_src - IRQ_TYPE_VUPDATE); |
| |
| if (acrtc) { |
| vrr_active = amdgpu_dm_crtc_vrr_active_irq(acrtc); |
| drm_dev = acrtc->base.dev; |
| vblank = drm_crtc_vblank_crtc(&acrtc->base); |
| previous_timestamp = atomic64_read(&irq_params->previous_timestamp); |
| frame_duration_ns = vblank->time - previous_timestamp; |
| |
| if (frame_duration_ns > 0) { |
| trace_amdgpu_refresh_rate_track(acrtc->base.index, |
| frame_duration_ns, |
| ktime_divns(NSEC_PER_SEC, frame_duration_ns)); |
| atomic64_set(&irq_params->previous_timestamp, vblank->time); |
| } |
| |
| drm_dbg_vbl(drm_dev, |
| "crtc:%d, vupdate-vrr:%d\n", acrtc->crtc_id, |
| vrr_active); |
| |
| /* Core vblank handling is done here after end of front-porch in |
| * vrr mode, as vblank timestamping will give valid results |
| * while now done after front-porch. This will also deliver |
| * page-flip completion events that have been queued to us |
| * if a pageflip happened inside front-porch. |
| */ |
| if (vrr_active) { |
| amdgpu_dm_crtc_handle_vblank(acrtc); |
| |
| /* BTR processing for pre-DCE12 ASICs */ |
| if (acrtc->dm_irq_params.stream && |
| adev->family < AMDGPU_FAMILY_AI) { |
| spin_lock_irqsave(&adev_to_drm(adev)->event_lock, flags); |
| mod_freesync_handle_v_update( |
| adev->dm.freesync_module, |
| acrtc->dm_irq_params.stream, |
| &acrtc->dm_irq_params.vrr_params); |
| |
| dc_stream_adjust_vmin_vmax( |
| adev->dm.dc, |
| acrtc->dm_irq_params.stream, |
| &acrtc->dm_irq_params.vrr_params.adjust); |
| spin_unlock_irqrestore(&adev_to_drm(adev)->event_lock, flags); |
| } |
| } |
| } |
| } |
| |
| /** |
| * dm_crtc_high_irq() - Handles CRTC interrupt |
| * @interrupt_params: used for determining the CRTC instance |
| * |
| * Handles the CRTC/VSYNC interrupt by notfying DRM's VBLANK |
| * event handler. |
| */ |
| static void dm_crtc_high_irq(void *interrupt_params) |
| { |
| struct common_irq_params *irq_params = interrupt_params; |
| struct amdgpu_device *adev = irq_params->adev; |
| struct drm_writeback_job *job; |
| struct amdgpu_crtc *acrtc; |
| unsigned long flags; |
| int vrr_active; |
| |
| acrtc = get_crtc_by_otg_inst(adev, irq_params->irq_src - IRQ_TYPE_VBLANK); |
| if (!acrtc) |
| return; |
| |
| if (acrtc->wb_conn) { |
| spin_lock_irqsave(&acrtc->wb_conn->job_lock, flags); |
| |
| if (acrtc->wb_pending) { |
| job = list_first_entry_or_null(&acrtc->wb_conn->job_queue, |
| struct drm_writeback_job, |
| list_entry); |
| acrtc->wb_pending = false; |
| spin_unlock_irqrestore(&acrtc->wb_conn->job_lock, flags); |
| |
| if (job) { |
| unsigned int v_total, refresh_hz; |
| struct dc_stream_state *stream = acrtc->dm_irq_params.stream; |
| |
| v_total = stream->adjust.v_total_max ? |
| stream->adjust.v_total_max : stream->timing.v_total; |
| refresh_hz = div_u64((uint64_t) stream->timing.pix_clk_100hz * |
| 100LL, (v_total * stream->timing.h_total)); |
| mdelay(1000 / refresh_hz); |
| |
| drm_writeback_signal_completion(acrtc->wb_conn, 0); |
| dc_stream_fc_disable_writeback(adev->dm.dc, |
| acrtc->dm_irq_params.stream, 0); |
| } |
| } else |
| spin_unlock_irqrestore(&acrtc->wb_conn->job_lock, flags); |
| } |
| |
| vrr_active = amdgpu_dm_crtc_vrr_active_irq(acrtc); |
| |
| drm_dbg_vbl(adev_to_drm(adev), |
| "crtc:%d, vupdate-vrr:%d, planes:%d\n", acrtc->crtc_id, |
| vrr_active, acrtc->dm_irq_params.active_planes); |
| |
| /** |
| * Core vblank handling at start of front-porch is only possible |
| * in non-vrr mode, as only there vblank timestamping will give |
| * valid results while done in front-porch. Otherwise defer it |
| * to dm_vupdate_high_irq after end of front-porch. |
| */ |
| if (!vrr_active) |
| amdgpu_dm_crtc_handle_vblank(acrtc); |
| |
| /** |
| * Following stuff must happen at start of vblank, for crc |
| * computation and below-the-range btr support in vrr mode. |
| */ |
| amdgpu_dm_crtc_handle_crc_irq(&acrtc->base); |
| |
| /* BTR updates need to happen before VUPDATE on Vega and above. */ |
| if (adev->family < AMDGPU_FAMILY_AI) |
| return; |
| |
| spin_lock_irqsave(&adev_to_drm(adev)->event_lock, flags); |
| |
| if (acrtc->dm_irq_params.stream && |
| acrtc->dm_irq_params.vrr_params.supported && |
| acrtc->dm_irq_params.freesync_config.state == |
| VRR_STATE_ACTIVE_VARIABLE) { |
| mod_freesync_handle_v_update(adev->dm.freesync_module, |
| acrtc->dm_irq_params.stream, |
| &acrtc->dm_irq_params.vrr_params); |
| |
| dc_stream_adjust_vmin_vmax(adev->dm.dc, acrtc->dm_irq_params.stream, |
| &acrtc->dm_irq_params.vrr_params.adjust); |
| } |
| |
| /* |
| * If there aren't any active_planes then DCH HUBP may be clock-gated. |
| * In that case, pageflip completion interrupts won't fire and pageflip |
| * completion events won't get delivered. Prevent this by sending |
| * pending pageflip events from here if a flip is still pending. |
| * |
| * If any planes are enabled, use dm_pflip_high_irq() instead, to |
| * avoid race conditions between flip programming and completion, |
| * which could cause too early flip completion events. |
| */ |
| if (adev->family >= AMDGPU_FAMILY_RV && |
| acrtc->pflip_status == AMDGPU_FLIP_SUBMITTED && |
| acrtc->dm_irq_params.active_planes == 0) { |
| if (acrtc->event) { |
| drm_crtc_send_vblank_event(&acrtc->base, acrtc->event); |
| acrtc->event = NULL; |
| drm_crtc_vblank_put(&acrtc->base); |
| } |
| acrtc->pflip_status = AMDGPU_FLIP_NONE; |
| } |
| |
| spin_unlock_irqrestore(&adev_to_drm(adev)->event_lock, flags); |
| } |
| |
| #if defined(CONFIG_DRM_AMD_SECURE_DISPLAY) |
| /** |
| * dm_dcn_vertical_interrupt0_high_irq() - Handles OTG Vertical interrupt0 for |
| * DCN generation ASICs |
| * @interrupt_params: interrupt parameters |
| * |
| * Used to set crc window/read out crc value at vertical line 0 position |
| */ |
| static void dm_dcn_vertical_interrupt0_high_irq(void *interrupt_params) |
| { |
| struct common_irq_params *irq_params = interrupt_params; |
| struct amdgpu_device *adev = irq_params->adev; |
| struct amdgpu_crtc *acrtc; |
| |
| acrtc = get_crtc_by_otg_inst(adev, irq_params->irq_src - IRQ_TYPE_VLINE0); |
| |
| if (!acrtc) |
| return; |
| |
| amdgpu_dm_crtc_handle_crc_window_irq(&acrtc->base); |
| } |
| #endif /* CONFIG_DRM_AMD_SECURE_DISPLAY */ |
| |
| /** |
| * dmub_aux_setconfig_callback - Callback for AUX or SET_CONFIG command. |
| * @adev: amdgpu_device pointer |
| * @notify: dmub notification structure |
| * |
| * Dmub AUX or SET_CONFIG command completion processing callback |
| * Copies dmub notification to DM which is to be read by AUX command. |
| * issuing thread and also signals the event to wake up the thread. |
| */ |
| static void dmub_aux_setconfig_callback(struct amdgpu_device *adev, |
| struct dmub_notification *notify) |
| { |
| if (adev->dm.dmub_notify) |
| memcpy(adev->dm.dmub_notify, notify, sizeof(struct dmub_notification)); |
| if (notify->type == DMUB_NOTIFICATION_AUX_REPLY) |
| complete(&adev->dm.dmub_aux_transfer_done); |
| } |
| |
| /** |
| * dmub_hpd_callback - DMUB HPD interrupt processing callback. |
| * @adev: amdgpu_device pointer |
| * @notify: dmub notification structure |
| * |
| * Dmub Hpd interrupt processing callback. Gets displayindex through the |
| * ink index and calls helper to do the processing. |
| */ |
| static void dmub_hpd_callback(struct amdgpu_device *adev, |
| struct dmub_notification *notify) |
| { |
| struct amdgpu_dm_connector *aconnector; |
| struct amdgpu_dm_connector *hpd_aconnector = NULL; |
| struct drm_connector *connector; |
| struct drm_connector_list_iter iter; |
| struct dc_link *link; |
| u8 link_index = 0; |
| struct drm_device *dev; |
| |
| if (adev == NULL) |
| return; |
| |
| if (notify == NULL) { |
| DRM_ERROR("DMUB HPD callback notification was NULL"); |
| return; |
| } |
| |
| if (notify->link_index > adev->dm.dc->link_count) { |
| DRM_ERROR("DMUB HPD index (%u)is abnormal", notify->link_index); |
| return; |
| } |
| |
| link_index = notify->link_index; |
| link = adev->dm.dc->links[link_index]; |
| dev = adev->dm.ddev; |
| |
| drm_connector_list_iter_begin(dev, &iter); |
| drm_for_each_connector_iter(connector, &iter) { |
| |
| if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK) |
| continue; |
| |
| aconnector = to_amdgpu_dm_connector(connector); |
| if (link && aconnector->dc_link == link) { |
| if (notify->type == DMUB_NOTIFICATION_HPD) |
| DRM_INFO("DMUB HPD IRQ callback: link_index=%u\n", link_index); |
| else if (notify->type == DMUB_NOTIFICATION_HPD_IRQ) |
| DRM_INFO("DMUB HPD RX IRQ callback: link_index=%u\n", link_index); |
| else |
| DRM_WARN("DMUB Unknown HPD callback type %d, link_index=%u\n", |
| notify->type, link_index); |
| |
| hpd_aconnector = aconnector; |
| break; |
| } |
| } |
| drm_connector_list_iter_end(&iter); |
| |
| if (hpd_aconnector) { |
| if (notify->type == DMUB_NOTIFICATION_HPD) { |
| if (hpd_aconnector->dc_link->hpd_status == (notify->hpd_status == DP_HPD_PLUG)) |
| DRM_WARN("DMUB reported hpd status unchanged. link_index=%u\n", link_index); |
| handle_hpd_irq_helper(hpd_aconnector); |
| } else if (notify->type == DMUB_NOTIFICATION_HPD_IRQ) { |
| handle_hpd_rx_irq(hpd_aconnector); |
| } |
| } |
| } |
| |
| /** |
| * register_dmub_notify_callback - Sets callback for DMUB notify |
| * @adev: amdgpu_device pointer |
| * @type: Type of dmub notification |
| * @callback: Dmub interrupt callback function |
| * @dmub_int_thread_offload: offload indicator |
| * |
| * API to register a dmub callback handler for a dmub notification |
| * Also sets indicator whether callback processing to be offloaded. |
| * to dmub interrupt handling thread |
| * Return: true if successfully registered, false if there is existing registration |
| */ |
| static bool register_dmub_notify_callback(struct amdgpu_device *adev, |
| enum dmub_notification_type type, |
| dmub_notify_interrupt_callback_t callback, |
| bool dmub_int_thread_offload) |
| { |
| if (callback != NULL && type < ARRAY_SIZE(adev->dm.dmub_thread_offload)) { |
| adev->dm.dmub_callback[type] = callback; |
| adev->dm.dmub_thread_offload[type] = dmub_int_thread_offload; |
| } else |
| return false; |
| |
| return true; |
| } |
| |
| static void dm_handle_hpd_work(struct work_struct *work) |
| { |
| struct dmub_hpd_work *dmub_hpd_wrk; |
| |
| dmub_hpd_wrk = container_of(work, struct dmub_hpd_work, handle_hpd_work); |
| |
| if (!dmub_hpd_wrk->dmub_notify) { |
| DRM_ERROR("dmub_hpd_wrk dmub_notify is NULL"); |
| return; |
| } |
| |
| if (dmub_hpd_wrk->dmub_notify->type < ARRAY_SIZE(dmub_hpd_wrk->adev->dm.dmub_callback)) { |
| dmub_hpd_wrk->adev->dm.dmub_callback[dmub_hpd_wrk->dmub_notify->type](dmub_hpd_wrk->adev, |
| dmub_hpd_wrk->dmub_notify); |
| } |
| |
| kfree(dmub_hpd_wrk->dmub_notify); |
| kfree(dmub_hpd_wrk); |
| |
| } |
| |
| #define DMUB_TRACE_MAX_READ 64 |
| /** |
| * dm_dmub_outbox1_low_irq() - Handles Outbox interrupt |
| * @interrupt_params: used for determining the Outbox instance |
| * |
| * Handles the Outbox Interrupt |
| * event handler. |
| */ |
| static void dm_dmub_outbox1_low_irq(void *interrupt_params) |
| { |
| struct dmub_notification notify = {0}; |
| struct common_irq_params *irq_params = interrupt_params; |
| struct amdgpu_device *adev = irq_params->adev; |
| struct amdgpu_display_manager *dm = &adev->dm; |
| struct dmcub_trace_buf_entry entry = { 0 }; |
| u32 count = 0; |
| struct dmub_hpd_work *dmub_hpd_wrk; |
| static const char *const event_type[] = { |
| "NO_DATA", |
| "AUX_REPLY", |
| "HPD", |
| "HPD_IRQ", |
| "SET_CONFIGC_REPLY", |
| "DPIA_NOTIFICATION", |
| }; |
| |
| do { |
| if (dc_dmub_srv_get_dmub_outbox0_msg(dm->dc, &entry)) { |
| trace_amdgpu_dmub_trace_high_irq(entry.trace_code, entry.tick_count, |
| entry.param0, entry.param1); |
| |
| DRM_DEBUG_DRIVER("trace_code:%u, tick_count:%u, param0:%u, param1:%u\n", |
| entry.trace_code, entry.tick_count, entry.param0, entry.param1); |
| } else |
| break; |
| |
| count++; |
| |
| } while (count <= DMUB_TRACE_MAX_READ); |
| |
| if (count > DMUB_TRACE_MAX_READ) |
| DRM_DEBUG_DRIVER("Warning : count > DMUB_TRACE_MAX_READ"); |
| |
| if (dc_enable_dmub_notifications(adev->dm.dc) && |
| irq_params->irq_src == DC_IRQ_SOURCE_DMCUB_OUTBOX) { |
| |
| do { |
| dc_stat_get_dmub_notification(adev->dm.dc, ¬ify); |
| if (notify.type >= ARRAY_SIZE(dm->dmub_thread_offload)) { |
| DRM_ERROR("DM: notify type %d invalid!", notify.type); |
| continue; |
| } |
| if (!dm->dmub_callback[notify.type]) { |
| DRM_WARN("DMUB notification skipped due to no handler: type=%s\n", |
| event_type[notify.type]); |
| continue; |
| } |
| if (dm->dmub_thread_offload[notify.type] == true) { |
| dmub_hpd_wrk = kzalloc(sizeof(*dmub_hpd_wrk), GFP_ATOMIC); |
| if (!dmub_hpd_wrk) { |
| DRM_ERROR("Failed to allocate dmub_hpd_wrk"); |
| return; |
| } |
| dmub_hpd_wrk->dmub_notify = kmemdup(¬ify, sizeof(struct dmub_notification), |
| GFP_ATOMIC); |
| if (!dmub_hpd_wrk->dmub_notify) { |
| kfree(dmub_hpd_wrk); |
| DRM_ERROR("Failed to allocate dmub_hpd_wrk->dmub_notify"); |
| return; |
| } |
| INIT_WORK(&dmub_hpd_wrk->handle_hpd_work, dm_handle_hpd_work); |
| dmub_hpd_wrk->adev = adev; |
| queue_work(adev->dm.delayed_hpd_wq, &dmub_hpd_wrk->handle_hpd_work); |
| } else { |
| dm->dmub_callback[notify.type](adev, ¬ify); |
| } |
| } while (notify.pending_notification); |
| } |
| } |
| |
| static int dm_set_clockgating_state(void *handle, |
| enum amd_clockgating_state state) |
| { |
| return 0; |
| } |
| |
| static int dm_set_powergating_state(void *handle, |
| enum amd_powergating_state state) |
| { |
| return 0; |
| } |
| |
| /* Prototypes of private functions */ |
| static int dm_early_init(void *handle); |
| |
| /* Allocate memory for FBC compressed data */ |
| static void amdgpu_dm_fbc_init(struct drm_connector *connector) |
| { |
| struct amdgpu_device *adev = drm_to_adev(connector->dev); |
| struct dm_compressor_info *compressor = &adev->dm.compressor; |
| struct amdgpu_dm_connector *aconn = to_amdgpu_dm_connector(connector); |
| struct drm_display_mode *mode; |
| unsigned long max_size = 0; |
| |
| if (adev->dm.dc->fbc_compressor == NULL) |
| return; |
| |
| if (aconn->dc_link->connector_signal != SIGNAL_TYPE_EDP) |
| return; |
| |
| if (compressor->bo_ptr) |
| return; |
| |
| |
| list_for_each_entry(mode, &connector->modes, head) { |
| if (max_size < (unsigned long) mode->htotal * mode->vtotal) |
| max_size = (unsigned long) mode->htotal * mode->vtotal; |
| } |
| |
| if (max_size) { |
| int r = amdgpu_bo_create_kernel(adev, max_size * 4, PAGE_SIZE, |
| AMDGPU_GEM_DOMAIN_GTT, &compressor->bo_ptr, |
| &compressor->gpu_addr, &compressor->cpu_addr); |
| |
| if (r) |
| DRM_ERROR("DM: Failed to initialize FBC\n"); |
| else { |
| adev->dm.dc->ctx->fbc_gpu_addr = compressor->gpu_addr; |
| DRM_INFO("DM: FBC alloc %lu\n", max_size*4); |
| } |
| |
| } |
| |
| } |
| |
| static int amdgpu_dm_audio_component_get_eld(struct device *kdev, int port, |
| int pipe, bool *enabled, |
| unsigned char *buf, int max_bytes) |
| { |
| struct drm_device *dev = dev_get_drvdata(kdev); |
| struct amdgpu_device *adev = drm_to_adev(dev); |
| struct drm_connector *connector; |
| struct drm_connector_list_iter conn_iter; |
| struct amdgpu_dm_connector *aconnector; |
| int ret = 0; |
| |
| *enabled = false; |
| |
| mutex_lock(&adev->dm.audio_lock); |
| |
| drm_connector_list_iter_begin(dev, &conn_iter); |
| drm_for_each_connector_iter(connector, &conn_iter) { |
| |
| if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK) |
| continue; |
| |
| aconnector = to_amdgpu_dm_connector(connector); |
| if (aconnector->audio_inst != port) |
| continue; |
| |
| *enabled = true; |
| ret = drm_eld_size(connector->eld); |
| memcpy(buf, connector->eld, min(max_bytes, ret)); |
| |
| break; |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| |
| mutex_unlock(&adev->dm.audio_lock); |
| |
| DRM_DEBUG_KMS("Get ELD : idx=%d ret=%d en=%d\n", port, ret, *enabled); |
| |
| return ret; |
| } |
| |
| static const struct drm_audio_component_ops amdgpu_dm_audio_component_ops = { |
| .get_eld = amdgpu_dm_audio_component_get_eld, |
| }; |
| |
| static int amdgpu_dm_audio_component_bind(struct device *kdev, |
| struct device *hda_kdev, void *data) |
| { |
| struct drm_device *dev = dev_get_drvdata(kdev); |
| struct amdgpu_device *adev = drm_to_adev(dev); |
| struct drm_audio_component *acomp = data; |
| |
| acomp->ops = &amdgpu_dm_audio_component_ops; |
| acomp->dev = kdev; |
| adev->dm.audio_component = acomp; |
| |
| return 0; |
| } |
| |
| static void amdgpu_dm_audio_component_unbind(struct device *kdev, |
| struct device *hda_kdev, void *data) |
| { |
| struct amdgpu_device *adev = drm_to_adev(dev_get_drvdata(kdev)); |
| struct drm_audio_component *acomp = data; |
| |
| acomp->ops = NULL; |
| acomp->dev = NULL; |
| adev->dm.audio_component = NULL; |
| } |
| |
| static const struct component_ops amdgpu_dm_audio_component_bind_ops = { |
| .bind = amdgpu_dm_audio_component_bind, |
| .unbind = amdgpu_dm_audio_component_unbind, |
| }; |
| |
| static int amdgpu_dm_audio_init(struct amdgpu_device *adev) |
| { |
| int i, ret; |
| |
| if (!amdgpu_audio) |
| return 0; |
| |
| adev->mode_info.audio.enabled = true; |
| |
| adev->mode_info.audio.num_pins = adev->dm.dc->res_pool->audio_count; |
| |
| for (i = 0; i < adev->mode_info.audio.num_pins; i++) { |
| adev->mode_info.audio.pin[i].channels = -1; |
| adev->mode_info.audio.pin[i].rate = -1; |
| adev->mode_info.audio.pin[i].bits_per_sample = -1; |
| adev->mode_info.audio.pin[i].status_bits = 0; |
| adev->mode_info.audio.pin[i].category_code = 0; |
| adev->mode_info.audio.pin[i].connected = false; |
| adev->mode_info.audio.pin[i].id = |
| adev->dm.dc->res_pool->audios[i]->inst; |
| adev->mode_info.audio.pin[i].offset = 0; |
| } |
| |
| ret = component_add(adev->dev, &amdgpu_dm_audio_component_bind_ops); |
| if (ret < 0) |
| return ret; |
| |
| adev->dm.audio_registered = true; |
| |
| return 0; |
| } |
| |
| static void amdgpu_dm_audio_fini(struct amdgpu_device *adev) |
| { |
| if (!amdgpu_audio) |
| return; |
| |
| if (!adev->mode_info.audio.enabled) |
| return; |
| |
| if (adev->dm.audio_registered) { |
| component_del(adev->dev, &amdgpu_dm_audio_component_bind_ops); |
| adev->dm.audio_registered = false; |
| } |
| |
| /* TODO: Disable audio? */ |
| |
| adev->mode_info.audio.enabled = false; |
| } |
| |
| static void amdgpu_dm_audio_eld_notify(struct amdgpu_device *adev, int pin) |
| { |
| struct drm_audio_component *acomp = adev->dm.audio_component; |
| |
| if (acomp && acomp->audio_ops && acomp->audio_ops->pin_eld_notify) { |
| DRM_DEBUG_KMS("Notify ELD: %d\n", pin); |
| |
| acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr, |
| pin, -1); |
| } |
| } |
| |
| static int dm_dmub_hw_init(struct amdgpu_device *adev) |
| { |
| const struct dmcub_firmware_header_v1_0 *hdr; |
| struct dmub_srv *dmub_srv = adev->dm.dmub_srv; |
| struct dmub_srv_fb_info *fb_info = adev->dm.dmub_fb_info; |
| const struct firmware *dmub_fw = adev->dm.dmub_fw; |
| struct dmcu *dmcu = adev->dm.dc->res_pool->dmcu; |
| struct abm *abm = adev->dm.dc->res_pool->abm; |
| struct dc_context *ctx = adev->dm.dc->ctx; |
| struct dmub_srv_hw_params hw_params; |
| enum dmub_status status; |
| const unsigned char *fw_inst_const, *fw_bss_data; |
| u32 i, fw_inst_const_size, fw_bss_data_size; |
| bool has_hw_support; |
| |
| if (!dmub_srv) |
| /* DMUB isn't supported on the ASIC. */ |
| return 0; |
| |
| if (!fb_info) { |
| DRM_ERROR("No framebuffer info for DMUB service.\n"); |
| return -EINVAL; |
| } |
| |
| if (!dmub_fw) { |
| /* Firmware required for DMUB support. */ |
| DRM_ERROR("No firmware provided for DMUB.\n"); |
| return -EINVAL; |
| } |
| |
| /* initialize register offsets for ASICs with runtime initialization available */ |
| if (dmub_srv->hw_funcs.init_reg_offsets) |
| dmub_srv->hw_funcs.init_reg_offsets(dmub_srv, ctx); |
| |
| status = dmub_srv_has_hw_support(dmub_srv, &has_hw_support); |
| if (status != DMUB_STATUS_OK) { |
| DRM_ERROR("Error checking HW support for DMUB: %d\n", status); |
| return -EINVAL; |
| } |
| |
| if (!has_hw_support) { |
| DRM_INFO("DMUB unsupported on ASIC\n"); |
| return 0; |
| } |
| |
| /* Reset DMCUB if it was previously running - before we overwrite its memory. */ |
| status = dmub_srv_hw_reset(dmub_srv); |
| if (status != DMUB_STATUS_OK) |
| DRM_WARN("Error resetting DMUB HW: %d\n", status); |
| |
| hdr = (const struct dmcub_firmware_header_v1_0 *)dmub_fw->data; |
| |
| fw_inst_const = dmub_fw->data + |
| le32_to_cpu(hdr->header.ucode_array_offset_bytes) + |
| PSP_HEADER_BYTES; |
| |
| fw_bss_data = dmub_fw->data + |
| le32_to_cpu(hdr->header.ucode_array_offset_bytes) + |
| le32_to_cpu(hdr->inst_const_bytes); |
| |
| /* Copy firmware and bios info into FB memory. */ |
| fw_inst_const_size = le32_to_cpu(hdr->inst_const_bytes) - |
| PSP_HEADER_BYTES - PSP_FOOTER_BYTES; |
| |
| fw_bss_data_size = le32_to_cpu(hdr->bss_data_bytes); |
| |
| /* if adev->firmware.load_type == AMDGPU_FW_LOAD_PSP, |
| * amdgpu_ucode_init_single_fw will load dmub firmware |
| * fw_inst_const part to cw0; otherwise, the firmware back door load |
| * will be done by dm_dmub_hw_init |
| */ |
| if (adev->firmware.load_type != AMDGPU_FW_LOAD_PSP) { |
| memcpy(fb_info->fb[DMUB_WINDOW_0_INST_CONST].cpu_addr, fw_inst_const, |
| fw_inst_const_size); |
| } |
| |
| if (fw_bss_data_size) |
| memcpy(fb_info->fb[DMUB_WINDOW_2_BSS_DATA].cpu_addr, |
| fw_bss_data, fw_bss_data_size); |
| |
| /* Copy firmware bios info into FB memory. */ |
| memcpy(fb_info->fb[DMUB_WINDOW_3_VBIOS].cpu_addr, adev->bios, |
| adev->bios_size); |
| |
| /* Reset regions that need to be reset. */ |
| memset(fb_info->fb[DMUB_WINDOW_4_MAILBOX].cpu_addr, 0, |
| fb_info->fb[DMUB_WINDOW_4_MAILBOX].size); |
| |
| memset(fb_info->fb[DMUB_WINDOW_5_TRACEBUFF].cpu_addr, 0, |
| fb_info->fb[DMUB_WINDOW_5_TRACEBUFF].size); |
| |
| memset(fb_info->fb[DMUB_WINDOW_6_FW_STATE].cpu_addr, 0, |
| fb_info->fb[DMUB_WINDOW_6_FW_STATE].size); |
| |
| memset(fb_info->fb[DMUB_WINDOW_SHARED_STATE].cpu_addr, 0, |
| fb_info->fb[DMUB_WINDOW_SHARED_STATE].size); |
| |
| /* Initialize hardware. */ |
| memset(&hw_params, 0, sizeof(hw_params)); |
| hw_params.fb_base = adev->gmc.fb_start; |
| hw_params.fb_offset = adev->vm_manager.vram_base_offset; |
| |
| /* backdoor load firmware and trigger dmub running */ |
| if (adev->firmware.load_type != AMDGPU_FW_LOAD_PSP) |
| hw_params.load_inst_const = true; |
| |
| if (dmcu) |
| hw_params.psp_version = dmcu->psp_version; |
| |
| for (i = 0; i < fb_info->num_fb; ++i) |
| hw_params.fb[i] = &fb_info->fb[i]; |
| |
| switch (amdgpu_ip_version(adev, DCE_HWIP, 0)) { |
| case IP_VERSION(3, 1, 3): |
| case IP_VERSION(3, 1, 4): |
| case IP_VERSION(3, 5, 0): |
| case IP_VERSION(3, 5, 1): |
| case IP_VERSION(4, 0, 1): |
| hw_params.dpia_supported = true; |
| hw_params.disable_dpia = adev->dm.dc->debug.dpia_debug.bits.disable_dpia; |
| break; |
| default: |
| break; |
| } |
| |
| switch (amdgpu_ip_version(adev, DCE_HWIP, 0)) { |
| case IP_VERSION(3, 5, 0): |
| case IP_VERSION(3, 5, 1): |
| hw_params.ips_sequential_ono = adev->external_rev_id > 0x10; |
| break; |
| default: |
| break; |
| } |
| |
| status = dmub_srv_hw_init(dmub_srv, &hw_params); |
| if (status != DMUB_STATUS_OK) { |
| DRM_ERROR("Error initializing DMUB HW: %d\n", status); |
| return -EINVAL; |
| } |
| |
| /* Wait for firmware load to finish. */ |
| status = dmub_srv_wait_for_auto_load(dmub_srv, 100000); |
| if (status != DMUB_STATUS_OK) |
| DRM_WARN("Wait for DMUB auto-load failed: %d\n", status); |
| |
| /* Init DMCU and ABM if available. */ |
| if (dmcu && abm) { |
| dmcu->funcs->dmcu_init(dmcu); |
| abm->dmcu_is_running = dmcu->funcs->is_dmcu_initialized(dmcu); |
| } |
| |
| if (!adev->dm.dc->ctx->dmub_srv) |
| adev->dm.dc->ctx->dmub_srv = dc_dmub_srv_create(adev->dm.dc, dmub_srv); |
| if (!adev->dm.dc->ctx->dmub_srv) { |
| DRM_ERROR("Couldn't allocate DC DMUB server!\n"); |
| return -ENOMEM; |
| } |
| |
| DRM_INFO("DMUB hardware initialized: version=0x%08X\n", |
| adev->dm.dmcub_fw_version); |
| |
| return 0; |
| } |
| |
| static void dm_dmub_hw_resume(struct amdgpu_device *adev) |
| { |
| struct dmub_srv *dmub_srv = adev->dm.dmub_srv; |
| enum dmub_status status; |
| bool init; |
| int r; |
| |
| if (!dmub_srv) { |
| /* DMUB isn't supported on the ASIC. */ |
| return; |
| } |
| |
| status = dmub_srv_is_hw_init(dmub_srv, &init); |
| if (status != DMUB_STATUS_OK) |
| DRM_WARN("DMUB hardware init check failed: %d\n", status); |
| |
| if (status == DMUB_STATUS_OK && init) { |
| /* Wait for firmware load to finish. */ |
| status = dmub_srv_wait_for_auto_load(dmub_srv, 100000); |
| if (status != DMUB_STATUS_OK) |
| DRM_WARN("Wait for DMUB auto-load failed: %d\n", status); |
| } else { |
| /* Perform the full hardware initialization. */ |
| r = dm_dmub_hw_init(adev); |
| if (r) |
| DRM_ERROR("DMUB interface failed to initialize: status=%d\n", r); |
| } |
| } |
| |
| static void mmhub_read_system_context(struct amdgpu_device *adev, struct dc_phy_addr_space_config *pa_config) |
| { |
| u64 pt_base; |
| u32 logical_addr_low; |
| u32 logical_addr_high; |
| u32 agp_base, agp_bot, agp_top; |
| PHYSICAL_ADDRESS_LOC page_table_start, page_table_end, page_table_base; |
| |
| memset(pa_config, 0, sizeof(*pa_config)); |
| |
| agp_base = 0; |
| agp_bot = adev->gmc.agp_start >> 24; |
| agp_top = adev->gmc.agp_end >> 24; |
| |
| /* AGP aperture is disabled */ |
| if (agp_bot > agp_top) { |
| logical_addr_low = adev->gmc.fb_start >> 18; |
| if (adev->apu_flags & (AMD_APU_IS_RAVEN2 | |
| AMD_APU_IS_RENOIR | |
| AMD_APU_IS_GREEN_SARDINE)) |
| /* |
| * Raven2 has a HW issue that it is unable to use the vram which |
| * is out of MC_VM_SYSTEM_APERTURE_HIGH_ADDR. So here is the |
| * workaround that increase system aperture high address (add 1) |
| * to get rid of the VM fault and hardware hang. |
| */ |
| logical_addr_high = (adev->gmc.fb_end >> 18) + 0x1; |
| else |
| logical_addr_high = adev->gmc.fb_end >> 18; |
| } else { |
| logical_addr_low = min(adev->gmc.fb_start, adev->gmc.agp_start) >> 18; |
| if (adev->apu_flags & (AMD_APU_IS_RAVEN2 | |
| AMD_APU_IS_RENOIR | |
| AMD_APU_IS_GREEN_SARDINE)) |
| /* |
| * Raven2 has a HW issue that it is unable to use the vram which |
| * is out of MC_VM_SYSTEM_APERTURE_HIGH_ADDR. So here is the |
| * workaround that increase system aperture high address (add 1) |
| * to get rid of the VM fault and hardware hang. |
| */ |
| logical_addr_high = max((adev->gmc.fb_end >> 18) + 0x1, adev->gmc.agp_end >> 18); |
| else |
| logical_addr_high = max(adev->gmc.fb_end, adev->gmc.agp_end) >> 18; |
| } |
| |
| pt_base = amdgpu_gmc_pd_addr(adev->gart.bo); |
| |
| page_table_start.high_part = upper_32_bits(adev->gmc.gart_start >> |
| AMDGPU_GPU_PAGE_SHIFT); |
| page_table_start.low_part = lower_32_bits(adev->gmc.gart_start >> |
| AMDGPU_GPU_PAGE_SHIFT); |
| page_table_end.high_part = upper_32_bits(adev->gmc.gart_end >> |
| AMDGPU_GPU_PAGE_SHIFT); |
| page_table_end.low_part = lower_32_bits(adev->gmc.gart_end >> |
| AMDGPU_GPU_PAGE_SHIFT); |
| page_table_base.high_part = upper_32_bits(pt_base); |
| page_table_base.low_part = lower_32_bits(pt_base); |
| |
| pa_config->system_aperture.start_addr = (uint64_t)logical_addr_low << 18; |
| pa_config->system_aperture.end_addr = (uint64_t)logical_addr_high << 18; |
| |
| pa_config->system_aperture.agp_base = (uint64_t)agp_base << 24; |
| pa_config->system_aperture.agp_bot = (uint64_t)agp_bot << 24; |
| pa_config->system_aperture.agp_top = (uint64_t)agp_top << 24; |
| |
| pa_config->system_aperture.fb_base = adev->gmc.fb_start; |
| pa_config->system_aperture.fb_offset = adev->vm_manager.vram_base_offset; |
| pa_config->system_aperture.fb_top = adev->gmc.fb_end; |
| |
| pa_config->gart_config.page_table_start_addr = page_table_start.quad_part << 12; |
| pa_config->gart_config.page_table_end_addr = page_table_end.quad_part << 12; |
| pa_config->gart_config.page_table_base_addr = page_table_base.quad_part; |
| |
| pa_config->is_hvm_enabled = adev->mode_info.gpu_vm_support; |
| |
| } |
| |
| static void force_connector_state( |
| struct amdgpu_dm_connector *aconnector, |
| enum drm_connector_force force_state) |
| { |
| struct drm_connector *connector = &aconnector->base; |
| |
| mutex_lock(&connector->dev->mode_config.mutex); |
| aconnector->base.force = force_state; |
| mutex_unlock(&connector->dev->mode_config.mutex); |
| |
| mutex_lock(&aconnector->hpd_lock); |
| drm_kms_helper_connector_hotplug_event(connector); |
| mutex_unlock(&aconnector->hpd_lock); |
| } |
| |
| static void dm_handle_hpd_rx_offload_work(struct work_struct *work) |
| { |
| struct hpd_rx_irq_offload_work *offload_work; |
| struct amdgpu_dm_connector *aconnector; |
| struct dc_link *dc_link; |
| struct amdgpu_device *adev; |
| enum dc_connection_type new_connection_type = dc_connection_none; |
| unsigned long flags; |
| union test_response test_response; |
| |
| memset(&test_response, 0, sizeof(test_response)); |
| |
| offload_work = container_of(work, struct hpd_rx_irq_offload_work, work); |
| aconnector = offload_work->offload_wq->aconnector; |
| |
| if (!aconnector) { |
| DRM_ERROR("Can't retrieve aconnector in hpd_rx_irq_offload_work"); |
| goto skip; |
| } |
| |
| adev = drm_to_adev(aconnector->base.dev); |
| dc_link = aconnector->dc_link; |
| |
| mutex_lock(&aconnector->hpd_lock); |
| if (!dc_link_detect_connection_type(dc_link, &new_connection_type)) |
| DRM_ERROR("KMS: Failed to detect connector\n"); |
| mutex_unlock(&aconnector->hpd_lock); |
| |
| if (new_connection_type == dc_connection_none) |
| goto skip; |
| |
| if (amdgpu_in_reset(adev)) |
| goto skip; |
| |
| if (offload_work->data.bytes.device_service_irq.bits.UP_REQ_MSG_RDY || |
| offload_work->data.bytes.device_service_irq.bits.DOWN_REP_MSG_RDY) { |
| dm_handle_mst_sideband_msg_ready_event(&aconnector->mst_mgr, DOWN_OR_UP_MSG_RDY_EVENT); |
| spin_lock_irqsave(&offload_work->offload_wq->offload_lock, flags); |
| offload_work->offload_wq->is_handling_mst_msg_rdy_event = false; |
| spin_unlock_irqrestore(&offload_work->offload_wq->offload_lock, flags); |
| goto skip; |
| } |
| |
| mutex_lock(&adev->dm.dc_lock); |
| if (offload_work->data.bytes.device_service_irq.bits.AUTOMATED_TEST) { |
| dc_link_dp_handle_automated_test(dc_link); |
| |
| if (aconnector->timing_changed) { |
| /* force connector disconnect and reconnect */ |
| force_connector_state(aconnector, DRM_FORCE_OFF); |
| msleep(100); |
| force_connector_state(aconnector, DRM_FORCE_UNSPECIFIED); |
| } |
| |
| test_response.bits.ACK = 1; |
| |
| core_link_write_dpcd( |
| dc_link, |
| DP_TEST_RESPONSE, |
| &test_response.raw, |
| sizeof(test_response)); |
| } else if ((dc_link->connector_signal != SIGNAL_TYPE_EDP) && |
| dc_link_check_link_loss_status(dc_link, &offload_work->data) && |
| dc_link_dp_allow_hpd_rx_irq(dc_link)) { |
| /* offload_work->data is from handle_hpd_rx_irq-> |
| * schedule_hpd_rx_offload_work.this is defer handle |
| * for hpd short pulse. upon here, link status may be |
| * changed, need get latest link status from dpcd |
| * registers. if link status is good, skip run link |
| * training again. |
| */ |
| union hpd_irq_data irq_data; |
| |
| memset(&irq_data, 0, sizeof(irq_data)); |
| |
| /* before dc_link_dp_handle_link_loss, allow new link lost handle |
| * request be added to work queue if link lost at end of dc_link_ |
| * dp_handle_link_loss |
| */ |
| spin_lock_irqsave(&offload_work->offload_wq->offload_lock, flags); |
| offload_work->offload_wq->is_handling_link_loss = false; |
| spin_unlock_irqrestore(&offload_work->offload_wq->offload_lock, flags); |
| |
| if ((dc_link_dp_read_hpd_rx_irq_data(dc_link, &irq_data) == DC_OK) && |
| dc_link_check_link_loss_status(dc_link, &irq_data)) |
| dc_link_dp_handle_link_loss(dc_link); |
| } |
| mutex_unlock(&adev->dm.dc_lock); |
| |
| skip: |
| kfree(offload_work); |
| |
| } |
| |
| static struct hpd_rx_irq_offload_work_queue *hpd_rx_irq_create_workqueue(struct dc *dc) |
| { |
| int max_caps = dc->caps.max_links; |
| int i = 0; |
| struct hpd_rx_irq_offload_work_queue *hpd_rx_offload_wq = NULL; |
| |
| hpd_rx_offload_wq = kcalloc(max_caps, sizeof(*hpd_rx_offload_wq), GFP_KERNEL); |
| |
| if (!hpd_rx_offload_wq) |
| return NULL; |
| |
| |
| for (i = 0; i < max_caps; i++) { |
| hpd_rx_offload_wq[i].wq = |
| create_singlethread_workqueue("amdgpu_dm_hpd_rx_offload_wq"); |
| |
| if (hpd_rx_offload_wq[i].wq == NULL) { |
| DRM_ERROR("create amdgpu_dm_hpd_rx_offload_wq fail!"); |
| goto out_err; |
| } |
| |
| spin_lock_init(&hpd_rx_offload_wq[i].offload_lock); |
| } |
| |
| return hpd_rx_offload_wq; |
| |
| out_err: |
| for (i = 0; i < max_caps; i++) { |
| if (hpd_rx_offload_wq[i].wq) |
| destroy_workqueue(hpd_rx_offload_wq[i].wq); |
| } |
| kfree(hpd_rx_offload_wq); |
| return NULL; |
| } |
| |
| struct amdgpu_stutter_quirk { |
| u16 chip_vendor; |
| u16 chip_device; |
| u16 subsys_vendor; |
| u16 subsys_device; |
| u8 revision; |
| }; |
| |
| static const struct amdgpu_stutter_quirk amdgpu_stutter_quirk_list[] = { |
| /* https://bugzilla.kernel.org/show_bug.cgi?id=214417 */ |
| { 0x1002, 0x15dd, 0x1002, 0x15dd, 0xc8 }, |
| { 0, 0, 0, 0, 0 }, |
| }; |
| |
| static bool dm_should_disable_stutter(struct pci_dev *pdev) |
| { |
| const struct amdgpu_stutter_quirk *p = amdgpu_stutter_quirk_list; |
| |
| while (p && p->chip_device != 0) { |
| if (pdev->vendor == p->chip_vendor && |
| pdev->device == p->chip_device && |
| pdev->subsystem_vendor == p->subsys_vendor && |
| pdev->subsystem_device == p->subsys_device && |
| pdev->revision == p->revision) { |
| return true; |
| } |
| ++p; |
| } |
| return false; |
| } |
| |
| static const struct dmi_system_id hpd_disconnect_quirk_table[] = { |
| { |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Precision 3660"), |
| }, |
| }, |
| { |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Precision 3260"), |
| }, |
| }, |
| { |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Precision 3460"), |
| }, |
| }, |
| { |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex Tower Plus 7010"), |
| }, |
| }, |
| { |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex Tower 7010"), |
| }, |
| }, |
| { |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex SFF Plus 7010"), |
| }, |
| }, |
| { |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex SFF 7010"), |
| }, |
| }, |
| { |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex Micro Plus 7010"), |
| }, |
| }, |
| { |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex Micro 7010"), |
| }, |
| }, |
| {} |
| /* TODO: refactor this from a fixed table to a dynamic option */ |
| }; |
| |
| static void retrieve_dmi_info(struct amdgpu_display_manager *dm) |
| { |
| const struct dmi_system_id *dmi_id; |
| |
| dm->aux_hpd_discon_quirk = false; |
| |
| dmi_id = dmi_first_match(hpd_disconnect_quirk_table); |
| if (dmi_id) { |
| dm->aux_hpd_discon_quirk = true; |
| DRM_INFO("aux_hpd_discon_quirk attached\n"); |
| } |
| } |
| |
| void* |
| dm_allocate_gpu_mem( |
| struct amdgpu_device *adev, |
| enum dc_gpu_mem_alloc_type type, |
| size_t size, |
| long long *addr) |
| { |
| struct dal_allocation *da; |
| u32 domain = (type == DC_MEM_ALLOC_TYPE_GART) ? |
| AMDGPU_GEM_DOMAIN_GTT : AMDGPU_GEM_DOMAIN_VRAM; |
| int ret; |
| |
| da = kzalloc(sizeof(struct dal_allocation), GFP_KERNEL); |
| if (!da) |
| return NULL; |
| |
| ret = amdgpu_bo_create_kernel(adev, size, PAGE_SIZE, |
| domain, &da->bo, |
| &da->gpu_addr, &da->cpu_ptr); |
| |
| *addr = da->gpu_addr; |
| |
| if (ret) { |
| kfree(da); |
| return NULL; |
| } |
| |
| /* add da to list in dm */ |
| list_add(&da->list, &adev->dm.da_list); |
| |
| return da->cpu_ptr; |
| } |
| |
| static enum dmub_status |
| dm_dmub_send_vbios_gpint_command(struct amdgpu_device *adev, |
| enum dmub_gpint_command command_code, |
| uint16_t param, |
| uint32_t timeout_us) |
| { |
| union dmub_gpint_data_register reg, test; |
| uint32_t i; |
| |
| /* Assume that VBIOS DMUB is ready to take commands */ |
| |
| reg.bits.status = 1; |
| reg.bits.command_code = command_code; |
| reg.bits.param = param; |
| |
| cgs_write_register(adev->dm.cgs_device, 0x34c0 + 0x01f8, reg.all); |
| |
| for (i = 0; i < timeout_us; ++i) { |
| udelay(1); |
| |
| /* Check if our GPINT got acked */ |
| reg.bits.status = 0; |
| test = (union dmub_gpint_data_register) |
| cgs_read_register(adev->dm.cgs_device, 0x34c0 + 0x01f8); |
| |
| if (test.all == reg.all) |
| return DMUB_STATUS_OK; |
| } |
| |
| return DMUB_STATUS_TIMEOUT; |
| } |
| |
| static struct dml2_soc_bb *dm_dmub_get_vbios_bounding_box(struct amdgpu_device *adev) |
| { |
| struct dml2_soc_bb *bb; |
| long long addr; |
| int i = 0; |
| uint16_t chunk; |
| enum dmub_gpint_command send_addrs[] = { |
| DMUB_GPINT__SET_BB_ADDR_WORD0, |
| DMUB_GPINT__SET_BB_ADDR_WORD1, |
| DMUB_GPINT__SET_BB_ADDR_WORD2, |
| DMUB_GPINT__SET_BB_ADDR_WORD3, |
| }; |
| enum dmub_status ret; |
| |
| switch (amdgpu_ip_version(adev, DCE_HWIP, 0)) { |
| case IP_VERSION(4, 0, 1): |
| break; |
| default: |
| return NULL; |
| } |
| |
| bb = dm_allocate_gpu_mem(adev, |
| DC_MEM_ALLOC_TYPE_GART, |
| sizeof(struct dml2_soc_bb), |
| &addr); |
| if (!bb) |
| return NULL; |
| |
| for (i = 0; i < 4; i++) { |
| /* Extract 16-bit chunk */ |
| chunk = ((uint64_t) addr >> (i * 16)) & 0xFFFF; |
| /* Send the chunk */ |
| ret = dm_dmub_send_vbios_gpint_command(adev, send_addrs[i], chunk, 30000); |
| if (ret != DMUB_STATUS_OK) |
| /* No need to free bb here since it shall be done unconditionally <elsewhere> */ |
| return NULL; |
| } |
| |
| /* Now ask DMUB to copy the bb */ |
| ret = dm_dmub_send_vbios_gpint_command(adev, DMUB_GPINT__BB_COPY, 1, 200000); |
| if (ret != DMUB_STATUS_OK) |
| return NULL; |
| |
| return bb; |
| } |
| |
| static int amdgpu_dm_init(struct amdgpu_device *adev) |
| { |
| struct dc_init_data init_data; |
| struct dc_callback_init init_params; |
| int r; |
| |
| adev->dm.ddev = adev_to_drm(adev); |
| adev->dm.adev = adev; |
| |
| /* Zero all the fields */ |
| memset(&init_data, 0, sizeof(init_data)); |
| memset(&init_params, 0, sizeof(init_params)); |
| |
| mutex_init(&adev->dm.dpia_aux_lock); |
| mutex_init(&adev->dm.dc_lock); |
| mutex_init(&adev->dm.audio_lock); |
| |
| if (amdgpu_dm_irq_init(adev)) { |
| DRM_ERROR("amdgpu: failed to initialize DM IRQ support.\n"); |
| goto error; |
| } |
| |
| init_data.asic_id.chip_family = adev->family; |
| |
| init_data.asic_id.pci_revision_id = adev->pdev->revision; |
| init_data.asic_id.hw_internal_rev = adev->external_rev_id; |
| init_data.asic_id.chip_id = adev->pdev->device; |
| |
| init_data.asic_id.vram_width = adev->gmc.vram_width; |
| /* TODO: initialize init_data.asic_id.vram_type here!!!! */ |
| init_data.asic_id.atombios_base_address = |
| adev->mode_info.atom_context->bios; |
| |
| init_data.driver = adev; |
| |
| /* cgs_device was created in dm_sw_init() */ |
| init_data.cgs_device = adev->dm.cgs_device; |
| |
| init_data.dce_environment = DCE_ENV_PRODUCTION_DRV; |
| |
| switch (amdgpu_ip_version(adev, DCE_HWIP, 0)) { |
| case IP_VERSION(2, 1, 0): |
| switch (adev->dm.dmcub_fw_version) { |
| case 0: /* development */ |
| case 0x1: /* linux-firmware.git hash 6d9f399 */ |
| case 0x01000000: /* linux-firmware.git hash 9a0b0f4 */ |
| init_data.flags.disable_dmcu = false; |
| break; |
| default: |
| init_data.flags.disable_dmcu = true; |
| } |
| break; |
| case IP_VERSION(2, 0, 3): |
| init_data.flags.disable_dmcu = true; |
| break; |
| default: |
| break; |
| } |
| |
| /* APU support S/G display by default except: |
| * ASICs before Carrizo, |
| * RAVEN1 (Users reported stability issue) |
| */ |
| |
| if (adev->asic_type < CHIP_CARRIZO) { |
| init_data.flags.gpu_vm_support = false; |
| } else if (adev->asic_type == CHIP_RAVEN) { |
| if (adev->apu_flags & AMD_APU_IS_RAVEN) |
| init_data.flags.gpu_vm_support = false; |
| else |
| init_data.flags.gpu_vm_support = (amdgpu_sg_display != 0); |
| } else { |
| init_data.flags.gpu_vm_support = (amdgpu_sg_display != 0) && (adev->flags & AMD_IS_APU); |
| } |
| |
| adev->mode_info.gpu_vm_support = init_data.flags.gpu_vm_support; |
| |
| if (amdgpu_dc_feature_mask & DC_FBC_MASK) |
| init_data.flags.fbc_support = true; |
| |
| if (amdgpu_dc_feature_mask & DC_MULTI_MON_PP_MCLK_SWITCH_MASK) |
| init_data.flags.multi_mon_pp_mclk_switch = true; |
| |
| if (amdgpu_dc_feature_mask & DC_DISABLE_FRACTIONAL_PWM_MASK) |
| init_data.flags.disable_fractional_pwm = true; |
| |
| if (amdgpu_dc_feature_mask & DC_EDP_NO_POWER_SEQUENCING) |
| init_data.flags.edp_no_power_sequencing = true; |
| |
| if (amdgpu_dc_feature_mask & DC_DISABLE_LTTPR_DP1_4A) |
| init_data.flags.allow_lttpr_non_transparent_mode.bits.DP1_4A = true; |
| if (amdgpu_dc_feature_mask & DC_DISABLE_LTTPR_DP2_0) |
| init_data.flags.allow_lttpr_non_transparent_mode.bits.DP2_0 = true; |
| |
| init_data.flags.seamless_boot_edp_requested = false; |
| |
| if (amdgpu_device_seamless_boot_supported(adev)) { |
| init_data.flags.seamless_boot_edp_requested = true; |
| init_data.flags.allow_seamless_boot_optimization = true; |
| DRM_INFO("Seamless boot condition check passed\n"); |
| } |
| |
| init_data.flags.enable_mipi_converter_optimization = true; |
| |
| init_data.dcn_reg_offsets = adev->reg_offset[DCE_HWIP][0]; |
| init_data.nbio_reg_offsets = adev->reg_offset[NBIO_HWIP][0]; |
| init_data.clk_reg_offsets = adev->reg_offset[CLK_HWIP][0]; |
| |
| if (amdgpu_dc_debug_mask & DC_DISABLE_IPS) |
| init_data.flags.disable_ips = DMUB_IPS_DISABLE_ALL; |
| else |
| init_data.flags.disable_ips = DMUB_IPS_ENABLE; |
| |
| init_data.flags.disable_ips_in_vpb = 0; |
| |
| /* Enable DWB for tested platforms only */ |
| if (amdgpu_ip_version(adev, DCE_HWIP, 0) >= IP_VERSION(3, 0, 0)) |
| init_data.num_virtual_links = 1; |
| |
| retrieve_dmi_info(&adev->dm); |
| |
| if (adev->dm.bb_from_dmub) |
| init_data.bb_from_dmub = adev->dm.bb_from_dmub; |
| else |
| init_data.bb_from_dmub = NULL; |
| |
| /* Display Core create. */ |
| adev->dm.dc = dc_create(&init_data); |
| |
| if (adev->dm.dc) { |
| DRM_INFO("Display Core v%s initialized on %s\n", DC_VER, |
| dce_version_to_string(adev->dm.dc->ctx->dce_version)); |
| } else { |
| DRM_INFO("Display Core failed to initialize with v%s!\n", DC_VER); |
| goto error; |
| } |
| |
| if (amdgpu_dc_debug_mask & DC_DISABLE_PIPE_SPLIT) { |
| adev->dm.dc->debug.force_single_disp_pipe_split = false; |
| adev->dm.dc->debug.pipe_split_policy = MPC_SPLIT_AVOID; |
| } |
| |
| if (adev->asic_type != CHIP_CARRIZO && adev->asic_type != CHIP_STONEY) |
| adev->dm.dc->debug.disable_stutter = amdgpu_pp_feature_mask & PP_STUTTER_MODE ? false : true; |
| if (dm_should_disable_stutter(adev->pdev)) |
| adev->dm.dc->debug.disable_stutter = true; |
| |
| if (amdgpu_dc_debug_mask & DC_DISABLE_STUTTER) |
| adev->dm.dc->debug.disable_stutter = true; |
| |
| if (amdgpu_dc_debug_mask & DC_DISABLE_DSC) |
| adev->dm.dc->debug.disable_dsc = true; |
| |
| if (amdgpu_dc_debug_mask & DC_DISABLE_CLOCK_GATING) |
| adev->dm.dc->debug.disable_clock_gate = true; |
| |
| if (amdgpu_dc_debug_mask & DC_FORCE_SUBVP_MCLK_SWITCH) |
| adev->dm.dc->debug.force_subvp_mclk_switch = true; |
| |
| if (amdgpu_dc_debug_mask & DC_ENABLE_DML2) { |
| adev->dm.dc->debug.using_dml2 = true; |
| adev->dm.dc->debug.using_dml21 = true; |
| } |
| |
| adev->dm.dc->debug.visual_confirm = amdgpu_dc_visual_confirm; |
| |
| /* TODO: Remove after DP2 receiver gets proper support of Cable ID feature */ |
| adev->dm.dc->debug.ignore_cable_id = true; |
| |
| if (adev->dm.dc->caps.dp_hdmi21_pcon_support) |
| DRM_INFO("DP-HDMI FRL PCON supported\n"); |
| |
| r = dm_dmub_hw_init(adev); |
| if (r) { |
| DRM_ERROR("DMUB interface failed to initialize: status=%d\n", r); |
| goto error; |
| } |
| |
| dc_hardware_init(adev->dm.dc); |
| |
| adev->dm.hpd_rx_offload_wq = hpd_rx_irq_create_workqueue(adev->dm.dc); |
| if (!adev->dm.hpd_rx_offload_wq) { |
| DRM_ERROR("amdgpu: failed to create hpd rx offload workqueue.\n"); |
| goto error; |
| } |
| |
| if ((adev->flags & AMD_IS_APU) && (adev->asic_type >= CHIP_CARRIZO)) { |
| struct dc_phy_addr_space_config pa_config; |
| |
| mmhub_read_system_context(adev, &pa_config); |
| |
| // Call the DC init_memory func |
| dc_setup_system_context(adev->dm.dc, &pa_config); |
| } |
| |
| adev->dm.freesync_module = mod_freesync_create(adev->dm.dc); |
| if (!adev->dm.freesync_module) { |
| DRM_ERROR( |
| "amdgpu: failed to initialize freesync_module.\n"); |
| } else |
| DRM_DEBUG_DRIVER("amdgpu: freesync_module init done %p.\n", |
| adev->dm.freesync_module); |
| |
| amdgpu_dm_init_color_mod(); |
| |
| if (adev->dm.dc->caps.max_links > 0) { |
| adev->dm.vblank_control_workqueue = |
| create_singlethread_workqueue("dm_vblank_control_workqueue"); |
| if (!adev->dm.vblank_control_workqueue) |
| DRM_ERROR("amdgpu: failed to initialize vblank_workqueue.\n"); |
| } |
| |
| if (adev->dm.dc->caps.ips_support && adev->dm.dc->config.disable_ips == DMUB_IPS_ENABLE) |
| adev->dm.idle_workqueue = idle_create_workqueue(adev); |
| |
| if (adev->dm.dc->caps.max_links > 0 && adev->family >= AMDGPU_FAMILY_RV) { |
| adev->dm.hdcp_workqueue = hdcp_create_workqueue(adev, &init_params.cp_psp, adev->dm.dc); |
| |
| if (!adev->dm.hdcp_workqueue) |
| DRM_ERROR("amdgpu: failed to initialize hdcp_workqueue.\n"); |
| else |
| DRM_DEBUG_DRIVER("amdgpu: hdcp_workqueue init done %p.\n", adev->dm.hdcp_workqueue); |
| |
| dc_init_callbacks(adev->dm.dc, &init_params); |
| } |
| if (dc_is_dmub_outbox_supported(adev->dm.dc)) { |
| init_completion(&adev->dm.dmub_aux_transfer_done); |
| adev->dm.dmub_notify = kzalloc(sizeof(struct dmub_notification), GFP_KERNEL); |
| if (!adev->dm.dmub_notify) { |
| DRM_INFO("amdgpu: fail to allocate adev->dm.dmub_notify"); |
| goto error; |
| } |
| |
| adev->dm.delayed_hpd_wq = create_singlethread_workqueue("amdgpu_dm_hpd_wq"); |
| if (!adev->dm.delayed_hpd_wq) { |
| DRM_ERROR("amdgpu: failed to create hpd offload workqueue.\n"); |
| goto error; |
| } |
| |
| amdgpu_dm_outbox_init(adev); |
| if (!register_dmub_notify_callback(adev, DMUB_NOTIFICATION_AUX_REPLY, |
| dmub_aux_setconfig_callback, false)) { |
| DRM_ERROR("amdgpu: fail to register dmub aux callback"); |
| goto error; |
| } |
| /* Enable outbox notification only after IRQ handlers are registered and DMUB is alive. |
| * It is expected that DMUB will resend any pending notifications at this point. Note |
| * that hpd and hpd_irq handler registration are deferred to register_hpd_handlers() to |
| * align legacy interface initialization sequence. Connection status will be proactivly |
| * detected once in the amdgpu_dm_initialize_drm_device. |
| */ |
| dc_enable_dmub_outbox(adev->dm.dc); |
| |
| /* DPIA trace goes to dmesg logs only if outbox is enabled */ |
| if (amdgpu_dc_debug_mask & DC_ENABLE_DPIA_TRACE) |
| dc_dmub_srv_enable_dpia_trace(adev->dm.dc); |
| } |
| |
| if (amdgpu_dm_initialize_drm_device(adev)) { |
| DRM_ERROR( |
| "amdgpu: failed to initialize sw for display support.\n"); |
| goto error; |
| } |
| |
| /* create fake encoders for MST */ |
| dm_dp_create_fake_mst_encoders(adev); |
| |
| /* TODO: Add_display_info? */ |
| |
| /* TODO use dynamic cursor width */ |
| adev_to_drm(adev)->mode_config.cursor_width = adev->dm.dc->caps.max_cursor_size; |
| adev_to_drm(adev)->mode_config.cursor_height = adev->dm.dc->caps.max_cursor_size; |
| |
| if (drm_vblank_init(adev_to_drm(adev), adev->dm.display_indexes_num)) { |
| DRM_ERROR( |
| "amdgpu: failed to initialize sw for display support.\n"); |
| goto error; |
| } |
| |
| #if defined(CONFIG_DRM_AMD_SECURE_DISPLAY) |
| adev->dm.secure_display_ctxs = amdgpu_dm_crtc_secure_display_create_contexts(adev); |
| if (!adev->dm.secure_display_ctxs) |
| DRM_ERROR("amdgpu: failed to initialize secure display contexts.\n"); |
| #endif |
| |
| DRM_DEBUG_DRIVER("KMS initialized.\n"); |
| |
| return 0; |
| error: |
| amdgpu_dm_fini(adev); |
| |
| return -EINVAL; |
| } |
| |
| static int amdgpu_dm_early_fini(void *handle) |
| { |
| struct amdgpu_device *adev = (struct amdgpu_device *)handle; |
| |
| amdgpu_dm_audio_fini(adev); |
| |
| return 0; |
| } |
| |
| static void amdgpu_dm_fini(struct amdgpu_device *adev) |
| { |
| int i; |
| |
| if (adev->dm.vblank_control_workqueue) { |
| destroy_workqueue(adev->dm.vblank_control_workqueue); |
| adev->dm.vblank_control_workqueue = NULL; |
| } |
| |
| if (adev->dm.idle_workqueue) { |
| if (adev->dm.idle_workqueue->running) { |
| adev->dm.idle_workqueue->enable = false; |
| flush_work(&adev->dm.idle_workqueue->work); |
| } |
| |
| kfree(adev->dm.idle_workqueue); |
| adev->dm.idle_workqueue = NULL; |
| } |
| |
| amdgpu_dm_destroy_drm_device(&adev->dm); |
| |
| #if defined(CONFIG_DRM_AMD_SECURE_DISPLAY) |
| if (adev->dm.secure_display_ctxs) { |
| for (i = 0; i < adev->mode_info.num_crtc; i++) { |
| if (adev->dm.secure_display_ctxs[i].crtc) { |
| flush_work(&adev->dm.secure_display_ctxs[i].notify_ta_work); |
| flush_work(&adev->dm.secure_display_ctxs[i].forward_roi_work); |
| } |
| } |
| kfree(adev->dm.secure_display_ctxs); |
| adev->dm.secure_display_ctxs = NULL; |
| } |
| #endif |
| if (adev->dm.hdcp_workqueue) { |
| hdcp_destroy(&adev->dev->kobj, adev->dm.hdcp_workqueue); |
| adev->dm.hdcp_workqueue = NULL; |
| } |
| |
| if (adev->dm.dc) { |
| dc_deinit_callbacks(adev->dm.dc); |
| dc_dmub_srv_destroy(&adev->dm.dc->ctx->dmub_srv); |
| if (dc_enable_dmub_notifications(adev->dm.dc)) { |
| kfree(adev->dm.dmub_notify); |
| adev->dm.dmub_notify = NULL; |
| destroy_workqueue(adev->dm.delayed_hpd_wq); |
| adev->dm.delayed_hpd_wq = NULL; |
| } |
| } |
| |
| if (adev->dm.dmub_bo) |
| amdgpu_bo_free_kernel(&adev->dm.dmub_bo, |
| &adev->dm.dmub_bo_gpu_addr, |
| &adev->dm.dmub_bo_cpu_addr); |
| |
| if (adev->dm.hpd_rx_offload_wq && adev->dm.dc) { |
| for (i = 0; i < adev->dm.dc->caps.max_links; i++) { |
| if (adev->dm.hpd_rx_offload_wq[i].wq) { |
| destroy_workqueue(adev->dm.hpd_rx_offload_wq[i].wq); |
| adev->dm.hpd_rx_offload_wq[i].wq = NULL; |
| } |
| } |
| |
| kfree(adev->dm.hpd_rx_offload_wq); |
| adev->dm.hpd_rx_offload_wq = NULL; |
| } |
| |
| /* DC Destroy TODO: Replace destroy DAL */ |
| if (adev->dm.dc) |
| dc_destroy(&adev->dm.dc); |
| /* |
| * TODO: pageflip, vlank interrupt |
| * |
| * amdgpu_dm_irq_fini(adev); |
| */ |
| |
| if (adev->dm.cgs_device) { |
| amdgpu_cgs_destroy_device(adev->dm.cgs_device); |
| adev->dm.cgs_device = NULL; |
| } |
| if (adev->dm.freesync_module) { |
| mod_freesync_destroy(adev->dm.freesync_module); |
| adev->dm.freesync_module = NULL; |
| } |
| |
| mutex_destroy(&adev->dm.audio_lock); |
| mutex_destroy(&adev->dm.dc_lock); |
| mutex_destroy(&adev->dm.dpia_aux_lock); |
| } |
| |
| static int load_dmcu_fw(struct amdgpu_device *adev) |
| { |
| const char *fw_name_dmcu = NULL; |
| int r; |
| const struct dmcu_firmware_header_v1_0 *hdr; |
| |
| switch (adev->asic_type) { |
| #if defined(CONFIG_DRM_AMD_DC_SI) |
| case CHIP_TAHITI: |
| case CHIP_PITCAIRN: |
| case CHIP_VERDE: |
| case CHIP_OLAND: |
| #endif |
| case CHIP_BONAIRE: |
| case CHIP_HAWAII: |
| case CHIP_KAVERI: |
| case CHIP_KABINI: |
| case CHIP_MULLINS: |
| case CHIP_TONGA: |
| case CHIP_FIJI: |
| case CHIP_CARRIZO: |
| case CHIP_STONEY: |
| case CHIP_POLARIS11: |
| case CHIP_POLARIS10: |
| case CHIP_POLARIS12: |
| case CHIP_VEGAM: |
| case CHIP_VEGA10: |
| case CHIP_VEGA12: |
| case CHIP_VEGA20: |
| return 0; |
| case CHIP_NAVI12: |
| fw_name_dmcu = FIRMWARE_NAVI12_DMCU; |
| break; |
| case CHIP_RAVEN: |
| if (ASICREV_IS_PICASSO(adev->external_rev_id)) |
| fw_name_dmcu = FIRMWARE_RAVEN_DMCU; |
| else if (ASICREV_IS_RAVEN2(adev->external_rev_id)) |
| fw_name_dmcu = FIRMWARE_RAVEN_DMCU; |
| else |
| return 0; |
| break; |
| default: |
| switch (amdgpu_ip_version(adev, DCE_HWIP, 0)) { |
| case IP_VERSION(2, 0, 2): |
| case IP_VERSION(2, 0, 3): |
| case IP_VERSION(2, 0, 0): |
| case IP_VERSION(2, 1, 0): |
| case IP_VERSION(3, 0, 0): |
| case IP_VERSION(3, 0, 2): |
| case IP_VERSION(3, 0, 3): |
| case IP_VERSION(3, 0, 1): |
| case IP_VERSION(3, 1, 2): |
| case IP_VERSION(3, 1, 3): |
| case IP_VERSION(3, 1, 4): |
| case IP_VERSION(3, 1, 5): |
| case IP_VERSION(3, 1, 6): |
| case IP_VERSION(3, 2, 0): |
| case IP_VERSION(3, 2, 1): |
| case IP_VERSION(3, 5, 0): |
| case IP_VERSION(3, 5, 1): |
| case IP_VERSION(4, 0, 1): |
| return 0; |
| default: |
| break; |
| } |
| DRM_ERROR("Unsupported ASIC type: 0x%X\n", adev->asic_type); |
| return -EINVAL; |
| } |
| |
| if (adev->firmware.load_type != AMDGPU_FW_LOAD_PSP) { |
| DRM_DEBUG_KMS("dm: DMCU firmware not supported on direct or SMU loading\n"); |
| return 0; |
| } |
| |
| r = amdgpu_ucode_request(adev, &adev->dm.fw_dmcu, fw_name_dmcu); |
| if (r == -ENODEV) { |
| /* DMCU firmware is not necessary, so don't raise a fuss if it's missing */ |
| DRM_DEBUG_KMS("dm: DMCU firmware not found\n"); |
| adev->dm.fw_dmcu = NULL; |
| return 0; |
| } |
| if (r) { |
| dev_err(adev->dev, "amdgpu_dm: Can't validate firmware \"%s\"\n", |
| fw_name_dmcu); |
| amdgpu_ucode_release(&adev->dm.fw_dmcu); |
| return r; |
| } |
| |
| hdr = (const struct dmcu_firmware_header_v1_0 *)adev->dm.fw_dmcu->data; |
| adev->firmware.ucode[AMDGPU_UCODE_ID_DMCU_ERAM].ucode_id = AMDGPU_UCODE_ID_DMCU_ERAM; |
| adev->firmware.ucode[AMDGPU_UCODE_ID_DMCU_ERAM].fw = adev->dm.fw_dmcu; |
| adev->firmware.fw_size += |
| ALIGN(le32_to_cpu(hdr->header.ucode_size_bytes) - le32_to_cpu(hdr->intv_size_bytes), PAGE_SIZE); |
| |
| adev->firmware.ucode[AMDGPU_UCODE_ID_DMCU_INTV].ucode_id = AMDGPU_UCODE_ID_DMCU_INTV; |
| adev->firmware.ucode[AMDGPU_UCODE_ID_DMCU_INTV].fw = adev->dm.fw_dmcu; |
| adev->firmware.fw_size += |
| ALIGN(le32_to_cpu(hdr->intv_size_bytes), PAGE_SIZE); |
| |
| adev->dm.dmcu_fw_version = le32_to_cpu(hdr->header.ucode_version); |
| |
| DRM_DEBUG_KMS("PSP loading DMCU firmware\n"); |
| |
| return 0; |
| } |
| |
| static uint32_t amdgpu_dm_dmub_reg_read(void *ctx, uint32_t address) |
| { |
| struct amdgpu_device *adev = ctx; |
| |
| return dm_read_reg(adev->dm.dc->ctx, address); |
| } |
| |
| static void amdgpu_dm_dmub_reg_write(void *ctx, uint32_t address, |
| uint32_t value) |
| { |
| struct amdgpu_device *adev = ctx; |
| |
| return dm_write_reg(adev->dm.dc->ctx, address, value); |
| } |
| |
| static int dm_dmub_sw_init(struct amdgpu_device *adev) |
| { |
| struct dmub_srv_create_params create_params; |
| struct dmub_srv_region_params region_params; |
| struct dmub_srv_region_info region_info; |
| struct dmub_srv_memory_params memory_params; |
| struct dmub_srv_fb_info *fb_info; |
| struct dmub_srv *dmub_srv; |
| const struct dmcub_firmware_header_v1_0 *hdr; |
| enum dmub_asic dmub_asic; |
| enum dmub_status status; |
| static enum dmub_window_memory_type window_memory_type[DMUB_WINDOW_TOTAL] = { |
| DMUB_WINDOW_MEMORY_TYPE_FB, //DMUB_WINDOW_0_INST_CONST |
| DMUB_WINDOW_MEMORY_TYPE_FB, //DMUB_WINDOW_1_STACK |
| DMUB_WINDOW_MEMORY_TYPE_FB, //DMUB_WINDOW_2_BSS_DATA |
| DMUB_WINDOW_MEMORY_TYPE_FB, //DMUB_WINDOW_3_VBIOS |
| DMUB_WINDOW_MEMORY_TYPE_FB, //DMUB_WINDOW_4_MAILBOX |
| DMUB_WINDOW_MEMORY_TYPE_FB, //DMUB_WINDOW_5_TRACEBUFF |
| DMUB_WINDOW_MEMORY_TYPE_FB, //DMUB_WINDOW_6_FW_STATE |
| DMUB_WINDOW_MEMORY_TYPE_FB, //DMUB_WINDOW_7_SCRATCH_MEM |
| DMUB_WINDOW_MEMORY_TYPE_FB, //DMUB_WINDOW_SHARED_STATE |
| }; |
| int r; |
| |
| switch (amdgpu_ip_version(adev, DCE_HWIP, 0)) { |
| case IP_VERSION(2, 1, 0): |
| dmub_asic = DMUB_ASIC_DCN21; |
| break; |
| case IP_VERSION(3, 0, 0): |
| dmub_asic = DMUB_ASIC_DCN30; |
| break; |
| case IP_VERSION(3, 0, 1): |
| dmub_asic = DMUB_ASIC_DCN301; |
| break; |
| case IP_VERSION(3, 0, 2): |
| dmub_asic = DMUB_ASIC_DCN302; |
| break; |
| case IP_VERSION(3, 0, 3): |
| dmub_asic = DMUB_ASIC_DCN303; |
| break; |
| case IP_VERSION(3, 1, 2): |
| case IP_VERSION(3, 1, 3): |
| dmub_asic = (adev->external_rev_id == YELLOW_CARP_B0) ? DMUB_ASIC_DCN31B : DMUB_ASIC_DCN31; |
| break; |
| case IP_VERSION(3, 1, 4): |
| dmub_asic = DMUB_ASIC_DCN314; |
| break; |
| case IP_VERSION(3, 1, 5): |
| dmub_asic = DMUB_ASIC_DCN315; |
| break; |
| case IP_VERSION(3, 1, 6): |
| dmub_asic = DMUB_ASIC_DCN316; |
| break; |
| case IP_VERSION(3, 2, 0): |
| dmub_asic = DMUB_ASIC_DCN32; |
| break; |
| case IP_VERSION(3, 2, 1): |
| dmub_asic = DMUB_ASIC_DCN321; |
| break; |
| case IP_VERSION(3, 5, 0): |
| case IP_VERSION(3, 5, 1): |
| dmub_asic = DMUB_ASIC_DCN35; |
| break; |
| case IP_VERSION(4, 0, 1): |
| dmub_asic = DMUB_ASIC_DCN401; |
| break; |
| |
| default: |
| /* ASIC doesn't support DMUB. */ |
| return 0; |
| } |
| |
| hdr = (const struct dmcub_firmware_header_v1_0 *)adev->dm.dmub_fw->data; |
| adev->dm.dmcub_fw_version = le32_to_cpu(hdr->header.ucode_version); |
| |
| if (adev->firmware.load_type == AMDGPU_FW_LOAD_PSP) { |
| adev->firmware.ucode[AMDGPU_UCODE_ID_DMCUB].ucode_id = |
| AMDGPU_UCODE_ID_DMCUB; |
| adev->firmware.ucode[AMDGPU_UCODE_ID_DMCUB].fw = |
| adev->dm.dmub_fw; |
| adev->firmware.fw_size += |
| ALIGN(le32_to_cpu(hdr->inst_const_bytes), PAGE_SIZE); |
| |
| DRM_INFO("Loading DMUB firmware via PSP: version=0x%08X\n", |
| adev->dm.dmcub_fw_version); |
| } |
| |
| |
| adev->dm.dmub_srv = kzalloc(sizeof(*adev->dm.dmub_srv), GFP_KERNEL); |
| dmub_srv = adev->dm.dmub_srv; |
| |
| if (!dmub_srv) { |
| DRM_ERROR("Failed to allocate DMUB service!\n"); |
| return -ENOMEM; |
| } |
| |
| memset(&create_params, 0, sizeof(create_params)); |
| create_params.user_ctx = adev; |
| create_params.funcs.reg_read = amdgpu_dm_dmub_reg_read; |
| create_params.funcs.reg_write = amdgpu_dm_dmub_reg_write; |
| create_params.asic = dmub_asic; |
| |
| /* Create the DMUB service. */ |
| status = dmub_srv_create(dmub_srv, &create_params); |
| if (status != DMUB_STATUS_OK) { |
| DRM_ERROR("Error creating DMUB service: %d\n", status); |
| return -EINVAL; |
| } |
| |
| /* Calculate the size of all the regions for the DMUB service. */ |
| memset(®ion_params, 0, sizeof(region_params)); |
| |
| region_params.inst_const_size = le32_to_cpu(hdr->inst_const_bytes) - |
| PSP_HEADER_BYTES - PSP_FOOTER_BYTES; |
| region_params.bss_data_size = le32_to_cpu(hdr->bss_data_bytes); |
| region_params.vbios_size = adev->bios_size; |
| region_params.fw_bss_data = region_params.bss_data_size ? |
| adev->dm.dmub_fw->data + |
| le32_to_cpu(hdr->header.ucode_array_offset_bytes) + |
| le32_to_cpu(hdr->inst_const_bytes) : NULL; |
| region_params.fw_inst_const = |
| adev->dm.dmub_fw->data + |
| le32_to_cpu(hdr->header.ucode_array_offset_bytes) + |
| PSP_HEADER_BYTES; |
| region_params.window_memory_type = window_memory_type; |
| |
| status = dmub_srv_calc_region_info(dmub_srv, ®ion_params, |
| ®ion_info); |
| |
| if (status != DMUB_STATUS_OK) { |
| DRM_ERROR("Error calculating DMUB region info: %d\n", status); |
| return -EINVAL; |
| } |
| |
| /* |
| * Allocate a framebuffer based on the total size of all the regions. |
| * TODO: Move this into GART. |
| */ |
| r = amdgpu_bo_create_kernel(adev, region_info.fb_size, PAGE_SIZE, |
| AMDGPU_GEM_DOMAIN_VRAM | |
| AMDGPU_GEM_DOMAIN_GTT, |
| &adev->dm.dmub_bo, |
| &adev->dm.dmub_bo_gpu_addr, |
| &adev->dm.dmub_bo_cpu_addr); |
| if (r) |
| return r; |
| |
| /* Rebase the regions on the framebuffer address. */ |
| memset(&memory_params, 0, sizeof(memory_params)); |
| memory_params.cpu_fb_addr = adev->dm.dmub_bo_cpu_addr; |
| memory_params.gpu_fb_addr = adev->dm.dmub_bo_gpu_addr; |
| memory_params.region_info = ®ion_info; |
| memory_params.window_memory_type = window_memory_type; |
| |
| adev->dm.dmub_fb_info = |
| kzalloc(sizeof(*adev->dm.dmub_fb_info), GFP_KERNEL); |
| fb_info = adev->dm.dmub_fb_info; |
| |
| if (!fb_info) { |
| DRM_ERROR( |
| "Failed to allocate framebuffer info for DMUB service!\n"); |
| return -ENOMEM; |
| } |
| |
| status = dmub_srv_calc_mem_info(dmub_srv, &memory_params, fb_info); |
| if (status != DMUB_STATUS_OK) { |
| DRM_ERROR("Error calculating DMUB FB info: %d\n", status); |
| return -EINVAL; |
| } |
| |
| adev->dm.bb_from_dmub = dm_dmub_get_vbios_bounding_box(adev); |
| |
| return 0; |
| } |
| |
| static int dm_sw_init(void *handle) |
| { |
| struct amdgpu_device *adev = (struct amdgpu_device *)handle; |
| int r; |
| |
| adev->dm.cgs_device = amdgpu_cgs_create_device(adev); |
| |
| if (!adev->dm.cgs_device) { |
| DRM_ERROR("amdgpu: failed to create cgs device.\n"); |
| return -EINVAL; |
| } |
| |
| /* Moved from dm init since we need to use allocations for storing bounding box data */ |
| INIT_LIST_HEAD(&adev->dm.da_list); |
| |
| r = dm_dmub_sw_init(adev); |
| if (r) |
| return r; |
| |
| return load_dmcu_fw(adev); |
| } |
| |
| static int dm_sw_fini(void *handle) |
| { |
| struct amdgpu_device *adev = (struct amdgpu_device *)handle; |
| |
| kfree(adev->dm.bb_from_dmub); |
| adev->dm.bb_from_dmub = NULL; |
| |
| kfree(adev->dm.dmub_fb_info); |
| adev->dm.dmub_fb_info = NULL; |
| |
| if (adev->dm.dmub_srv) { |
| dmub_srv_destroy(adev->dm.dmub_srv); |
| kfree(adev->dm.dmub_srv); |
| adev->dm.dmub_srv = NULL; |
| } |
| |
| amdgpu_ucode_release(&adev->dm.dmub_fw); |
| amdgpu_ucode_release(&adev->dm.fw_dmcu); |
| |
| return 0; |
| } |
| |
| static int detect_mst_link_for_all_connectors(struct drm_device *dev) |
| { |
| struct amdgpu_dm_connector *aconnector; |
| struct drm_connector *connector; |
| struct drm_connector_list_iter iter; |
| int ret = 0; |
| |
| drm_connector_list_iter_begin(dev, &iter); |
| drm_for_each_connector_iter(connector, &iter) { |
| |
| if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK) |
| continue; |
| |
| aconnector = to_amdgpu_dm_connector(connector); |
| if (aconnector->dc_link->type == dc_connection_mst_branch && |
| aconnector->mst_mgr.aux) { |
| drm_dbg_kms(dev, "DM_MST: starting TM on aconnector: %p [id: %d]\n", |
| aconnector, |
| aconnector->base.base.id); |
| |
| ret = drm_dp_mst_topology_mgr_set_mst(&aconnector->mst_mgr, true); |
| if (ret < 0) { |
| drm_err(dev, "DM_MST: Failed to start MST\n"); |
| aconnector->dc_link->type = |
| dc_connection_single; |
| ret = dm_helpers_dp_mst_stop_top_mgr(aconnector->dc_link->ctx, |
| aconnector->dc_link); |
| break; |
| } |
| } |
| } |
| drm_connector_list_iter_end(&iter); |
| |
| return ret; |
| } |
| |
| static int dm_late_init(void *handle) |
| { |
| struct amdgpu_device *adev = (struct amdgpu_device *)handle; |
| |
| struct dmcu_iram_parameters params; |
| unsigned int linear_lut[16]; |
| int i; |
| struct dmcu *dmcu = NULL; |
| |
| dmcu = adev->dm.dc->res_pool->dmcu; |
| |
| for (i = 0; i < 16; i++) |
| linear_lut[i] = 0xFFFF * i / 15; |
| |
| params.set = 0; |
| params.backlight_ramping_override = false; |
| params.backlight_ramping_start = 0xCCCC; |
| params.backlight_ramping_reduction = 0xCCCCCCCC; |
| params.backlight_lut_array_size = 16; |
| params.backlight_lut_array = linear_lut; |
| |
| /* Min backlight level after ABM reduction, Don't allow below 1% |
| * 0xFFFF x 0.01 = 0x28F |
| */ |
| params.min_abm_backlight = 0x28F; |
| /* In the case where abm is implemented on dmcub, |
| * dmcu object will be null. |
| * ABM 2.4 and up are implemented on dmcub. |
| */ |
| if (dmcu) { |
| if (!dmcu_load_iram(dmcu, params)) |
| return -EINVAL; |
| } else if (adev->dm.dc->ctx->dmub_srv) { |
| struct dc_link *edp_links[MAX_NUM_EDP]; |
| int edp_num; |
| |
| dc_get_edp_links(adev->dm.dc, edp_links, &edp_num); |
| for (i = 0; i < edp_num; i++) { |
| if (!dmub_init_abm_config(adev->dm.dc->res_pool, params, i)) |
| return -EINVAL; |
| } |
| } |
| |
| return detect_mst_link_for_all_connectors(adev_to_drm(adev)); |
| } |
| |
| static void resume_mst_branch_status(struct drm_dp_mst_topology_mgr *mgr) |
| { |
| int ret; |
| u8 guid[16]; |
| u64 tmp64; |
| |
| mutex_lock(&mgr->lock); |
| if (!mgr->mst_primary) |
| goto out_fail; |
| |
| if (drm_dp_read_dpcd_caps(mgr->aux, mgr->dpcd) < 0) { |
| drm_dbg_kms(mgr->dev, "dpcd read failed - undocked during suspend?\n"); |
| goto out_fail; |
| } |
| |
| ret = drm_dp_dpcd_writeb(mgr->aux, DP_MSTM_CTRL, |
| DP_MST_EN | |
| DP_UP_REQ_EN | |
| DP_UPSTREAM_IS_SRC); |
| if (ret < 0) { |
| drm_dbg_kms(mgr->dev, "mst write failed - undocked during suspend?\n"); |
| goto out_fail; |
| } |
| |
| /* Some hubs forget their guids after they resume */ |
| ret = drm_dp_dpcd_read(mgr->aux, DP_GUID, guid, 16); |
| if (ret != 16) { |
| drm_dbg_kms(mgr->dev, "dpcd read failed - undocked during suspend?\n"); |
| goto out_fail; |
| } |
| |
| if (memchr_inv(guid, 0, 16) == NULL) { |
| tmp64 = get_jiffies_64(); |
| memcpy(&guid[0], &tmp64, sizeof(u64)); |
| memcpy(&guid[8], &tmp64, sizeof(u64)); |
| |
| ret = drm_dp_dpcd_write(mgr->aux, DP_GUID, guid, 16); |
| |
| if (ret != 16) { |
| drm_dbg_kms(mgr->dev, "check mstb guid failed - undocked during suspend?\n"); |
| goto out_fail; |
| } |
| } |
| |
| memcpy(mgr->mst_primary->guid, guid, 16); |
| |
| out_fail: |
| mutex_unlock(&mgr->lock); |
| } |
| |
| static void s3_handle_mst(struct drm_device *dev, bool suspend) |
| { |
| struct amdgpu_dm_connector *aconnector; |
| struct drm_connector *connector; |
| struct drm_connector_list_iter iter; |
| struct drm_dp_mst_topology_mgr *mgr; |
| |
| drm_connector_list_iter_begin(dev, &iter); |
| drm_for_each_connector_iter(connector, &iter) { |
| |
| if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK) |
| continue; |
| |
| aconnector = to_amdgpu_dm_connector(connector); |
| if (aconnector->dc_link->type != dc_connection_mst_branch || |
| aconnector->mst_root) |
| continue; |
| |
| mgr = &aconnector->mst_mgr; |
| |
| if (suspend) { |
| drm_dp_mst_topology_mgr_suspend(mgr); |
| } else { |
| /* if extended timeout is supported in hardware, |
| * default to LTTPR timeout (3.2ms) first as a W/A for DP link layer |
| * CTS 4.2.1.1 regression introduced by CTS specs requirement update. |
| */ |
| try_to_configure_aux_timeout(aconnector->dc_link->ddc, LINK_AUX_DEFAULT_LTTPR_TIMEOUT_PERIOD); |
| if (!dp_is_lttpr_present(aconnector->dc_link)) |
| try_to_configure_aux_timeout(aconnector->dc_link->ddc, LINK_AUX_DEFAULT_TIMEOUT_PERIOD); |
| |
| /* TODO: move resume_mst_branch_status() into drm mst resume again |
| * once topology probing work is pulled out from mst resume into mst |
| * resume 2nd step. mst resume 2nd step should be called after old |
| * state getting restored (i.e. drm_atomic_helper_resume()). |
| */ |
| resume_mst_branch_status(mgr); |
| } |
| } |
| drm_connector_list_iter_end(&iter); |
| } |
| |
| static int amdgpu_dm_smu_write_watermarks_table(struct amdgpu_device *adev) |
| { |
| int ret = 0; |
| |
| /* This interface is for dGPU Navi1x.Linux dc-pplib interface depends |
| * on window driver dc implementation. |
| * For Navi1x, clock settings of dcn watermarks are fixed. the settings |
| * should be passed to smu during boot up and resume from s3. |
| * boot up: dc calculate dcn watermark clock settings within dc_create, |
| * dcn20_resource_construct |
| * then call pplib functions below to pass the settings to smu: |
| * smu_set_watermarks_for_clock_ranges |
| * smu_set_watermarks_table |
| * navi10_set_watermarks_table |
| * smu_write_watermarks_table |
| * |
| * For Renoir, clock settings of dcn watermark are also fixed values. |
| * dc has implemented different flow for window driver: |
| * dc_hardware_init / dc_set_power_state |
| * dcn10_init_hw |
| * notify_wm_ranges |
| * set_wm_ranges |
| * -- Linux |
| * smu_set_watermarks_for_clock_ranges |
| * renoir_set_watermarks_table |
| * smu_write_watermarks_table |
| * |
| * For Linux, |
| * dc_hardware_init -> amdgpu_dm_init |
| * dc_set_power_state --> dm_resume |
| * |
| * therefore, this function apply to navi10/12/14 but not Renoir |
| * * |
| */ |
| switch (amdgpu_ip_version(adev, DCE_HWIP, 0)) { |
| case IP_VERSION(2, 0, 2): |
| case IP_VERSION(2, 0, 0): |
| break; |
| default: |
| return 0; |
| } |
| |
| ret = amdgpu_dpm_write_watermarks_table(adev); |
| if (ret) { |
| DRM_ERROR("Failed to update WMTABLE!\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * dm_hw_init() - Initialize DC device |
| * @handle: The base driver device containing the amdgpu_dm device. |
| * |
| * Initialize the &struct amdgpu_display_manager device. This involves calling |
| * the initializers of each DM component, then populating the struct with them. |
| * |
| * Although the function implies hardware initialization, both hardware and |
| * software are initialized here. Splitting them out to their relevant init |
| * hooks is a future TODO item. |
| * |
| * Some notable things that are initialized here: |
| * |
| * - Display Core, both software and hardware |
| * - DC modules that we need (freesync and color management) |
| * - DRM software states |
| * - Interrupt sources and handlers |
| * - Vblank support |
| * - Debug FS entries, if enabled |
| */ |
| static int dm_hw_init(void *handle) |
| { |
| struct amdgpu_device *adev = (struct amdgpu_device *)handle; |
| int r; |
| |
| /* Create DAL display manager */ |
| r = amdgpu_dm_init(adev); |
| if (r) |
| return r; |
| amdgpu_dm_hpd_init(adev); |
| |
| return 0; |
| } |
| |
| /** |
| * dm_hw_fini() - Teardown DC device |
| * @handle: The base driver device containing the amdgpu_dm device. |
| * |
| * Teardown components within &struct amdgpu_display_manager that require |
| * cleanup. This involves cleaning up the DRM device, DC, and any modules that |
| * were loaded. Also flush IRQ workqueues and disable them. |
| */ |
| static int dm_hw_fini(void *handle) |
| { |
| struct amdgpu_device *adev = (struct amdgpu_device *)handle; |
| |
| amdgpu_dm_hpd_fini(adev); |
| |
| amdgpu_dm_irq_fini(adev); |
| amdgpu_dm_fini(adev); |
| return 0; |
| } |
| |
| |
| static void dm_gpureset_toggle_interrupts(struct amdgpu_device *adev, |
| struct dc_state *state, bool enable) |
| { |
| enum dc_irq_source irq_source; |
| struct amdgpu_crtc *acrtc; |
| int rc = -EBUSY; |
| int i = 0; |
| |
| for (i = 0; i < state->stream_count; i++) { |
| acrtc = get_crtc_by_otg_inst( |
| adev, state->stream_status[i].primary_otg_inst); |
| |
| if (acrtc && state->stream_status[i].plane_count != 0) { |
| irq_source = IRQ_TYPE_PFLIP + acrtc->otg_inst; |
| rc = dc_interrupt_set(adev->dm.dc, irq_source, enable) ? 0 : -EBUSY; |
| if (rc) |
| DRM_WARN("Failed to %s pflip interrupts\n", |
| enable ? "enable" : "disable"); |
| |
| if (enable) { |
| if (amdgpu_dm_crtc_vrr_active(to_dm_crtc_state(acrtc->base.state))) |
| rc = amdgpu_dm_crtc_set_vupdate_irq(&acrtc->base, true); |
| } else |
| rc = amdgpu_dm_crtc_set_vupdate_irq(&acrtc->base, false); |
| |
| if (rc) |
| DRM_WARN("Failed to %sable vupdate interrupt\n", enable ? "en" : "dis"); |
| |
| irq_source = IRQ_TYPE_VBLANK + acrtc->otg_inst; |
| /* During gpu-reset we disable and then enable vblank irq, so |
| * don't use amdgpu_irq_get/put() to avoid refcount change. |
| */ |
| if (!dc_interrupt_set(adev->dm.dc, irq_source, enable)) |
| DRM_WARN("Failed to %sable vblank interrupt\n", enable ? "en" : "dis"); |
| } |
| } |
| |
| } |
| |
| static enum dc_status amdgpu_dm_commit_zero_streams(struct dc *dc) |
| { |
| struct dc_state *context = NULL; |
| enum dc_status res = DC_ERROR_UNEXPECTED; |
| int i; |
| struct dc_stream_state *del_streams[MAX_PIPES]; |
| int del_streams_count = 0; |
| struct dc_commit_streams_params params = {}; |
| |
| memset(del_streams, 0, sizeof(del_streams)); |
| |
| context = dc_state_create_current_copy(dc); |
| if (context == NULL) |
| goto context_alloc_fail; |
| |
| /* First remove from context all streams */ |
| for (i = 0; i < context->stream_count; i++) { |
| struct dc_stream_state *stream = context->streams[i]; |
| |
| del_streams[del_streams_count++] = stream; |
| } |
| |
| /* Remove all planes for removed streams and then remove the streams */ |
| for (i = 0; i < del_streams_count; i++) { |
| if (!dc_state_rem_all_planes_for_stream(dc, del_streams[i], context)) { |
| res = DC_FAIL_DETACH_SURFACES; |
| goto fail; |
| } |
| |
| res = dc_state_remove_stream(dc, context, del_streams[i]); |
| if (res != DC_OK) |
| goto fail; |
| } |
| |
| params.streams = context->streams; |
| params.stream_count = context->stream_count; |
| res = dc_commit_streams(dc, ¶ms); |
| |
| fail: |
| dc_state_release(context); |
| |
| context_alloc_fail: |
| return res; |
| } |
| |
| static void hpd_rx_irq_work_suspend(struct amdgpu_display_manager *dm) |
| { |
| int i; |
| |
| if (dm->hpd_rx_offload_wq) { |
| for (i = 0; i < dm->dc->caps.max_links; i++) |
| flush_workqueue(dm->hpd_rx_offload_wq[i].wq); |
| } |
| } |
| |
| static int dm_suspend(void *handle) |
| { |
| struct amdgpu_device *adev = handle; |
| struct amdgpu_display_manager *dm = &adev->dm; |
| int ret = 0; |
| |
| if (amdgpu_in_reset(adev)) { |
| mutex_lock(&dm->dc_lock); |
| |
| dc_allow_idle_optimizations(adev->dm.dc, false); |
| |
| dm->cached_dc_state = dc_state_create_copy(dm->dc->current_state); |
| |
| if (dm->cached_dc_state) |
| dm_gpureset_toggle_interrupts(adev, dm->cached_dc_state, false); |
| |
| amdgpu_dm_commit_zero_streams(dm->dc); |
| |
| amdgpu_dm_irq_suspend(adev); |
| |
| hpd_rx_irq_work_suspend(dm); |
| |
| return ret; |
| } |
| |
| WARN_ON(adev->dm.cached_state); |
| adev->dm.cached_state = drm_atomic_helper_suspend(adev_to_drm(adev)); |
| if (IS_ERR(adev->dm.cached_state)) |
| return PTR_ERR(adev->dm.cached_state); |
| |
| s3_handle_mst(adev_to_drm(adev), true); |
| |
| amdgpu_dm_irq_suspend(adev); |
| |
| hpd_rx_irq_work_suspend(dm); |
| |
| if (adev->dm.dc->caps.ips_support) |
| dc_allow_idle_optimizations(adev->dm.dc, true); |
| |
| dc_set_power_state(dm->dc, DC_ACPI_CM_POWER_STATE_D3); |
| dc_dmub_srv_set_power_state(dm->dc->ctx->dmub_srv, DC_ACPI_CM_POWER_STATE_D3); |
| |
| return 0; |
| } |
| |
| struct drm_connector * |
| amdgpu_dm_find_first_crtc_matching_connector(struct drm_atomic_state *state, |
| struct drm_crtc *crtc) |
| { |
| u32 i; |
| struct drm_connector_state *new_con_state; |
| struct drm_connector *connector; |
| struct drm_crtc *crtc_from_state; |
| |
| for_each_new_connector_in_state(state, connector, new_con_state, i) { |
| crtc_from_state = new_con_state->crtc; |
| |
| if (crtc_from_state == crtc) |
| return connector; |
| } |
| |
| return NULL; |
| } |
| |
| static void emulated_link_detect(struct dc_link *link) |
| { |
| struct dc_sink_init_data sink_init_data = { 0 }; |
| struct display_sink_capability sink_caps = { 0 }; |
| enum dc_edid_status edid_status; |
| struct dc_context *dc_ctx = link->ctx; |
| struct drm_device *dev = adev_to_drm(dc_ctx->driver_context); |
| struct dc_sink *sink = NULL; |
| struct dc_sink *prev_sink = NULL; |
| |
| link->type = dc_connection_none; |
| prev_sink = link->local_sink; |
| |
| if (prev_sink) |
| dc_sink_release(prev_sink); |
| |
| switch (link->connector_signal) { |
| case SIGNAL_TYPE_HDMI_TYPE_A: { |
| sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C; |
| sink_caps.signal = SIGNAL_TYPE_HDMI_TYPE_A; |
| break; |
| } |
| |
| case SIGNAL_TYPE_DVI_SINGLE_LINK: { |
| sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C; |
| sink_caps.signal = SIGNAL_TYPE_DVI_SINGLE_LINK; |
| break; |
| } |
| |
| case SIGNAL_TYPE_DVI_DUAL_LINK: { |
| sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C; |
| sink_caps.signal = SIGNAL_TYPE_DVI_DUAL_LINK; |
| break; |
| } |
| |
| case SIGNAL_TYPE_LVDS: { |
| sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C; |
| sink_caps.signal = SIGNAL_TYPE_LVDS; |
| break; |
| } |
| |
| case SIGNAL_TYPE_EDP: { |
| sink_caps.transaction_type = |
| DDC_TRANSACTION_TYPE_I2C_OVER_AUX; |
| sink_caps.signal = SIGNAL_TYPE_EDP; |
| break; |
| } |
| |
| case SIGNAL_TYPE_DISPLAY_PORT: { |
| sink_caps.transaction_type = |
| DDC_TRANSACTION_TYPE_I2C_OVER_AUX; |
| sink_caps.signal = SIGNAL_TYPE_VIRTUAL; |
| break; |
| } |
| |
| default: |
| drm_err(dev, "Invalid connector type! signal:%d\n", |
| link->connector_signal); |
| return; |
| } |
| |
| sink_init_data.link = link; |
| sink_init_data.sink_signal = sink_caps.signal; |
| |
| sink = dc_sink_create(&sink_init_data); |
| if (!sink) { |
| drm_err(dev, "Failed to create sink!\n"); |
| return; |
| } |
| |
| /* dc_sink_create returns a new reference */ |
| link->local_sink = sink; |
| |
| edid_status = dm_helpers_read_local_edid( |
| link->ctx, |
| link, |
| sink); |
| |
| if (edid_status != EDID_OK) |
| drm_err(dev, "Failed to read EDID\n"); |
| |
| } |
| |
| static void dm_gpureset_commit_state(struct dc_state *dc_state, |
| struct amdgpu_display_manager *dm) |
| { |
| struct { |
| struct dc_surface_update surface_updates[MAX_SURFACES]; |
| struct dc_plane_info plane_infos[MAX_SURFACES]; |
| struct dc_scaling_info scaling_infos[MAX_SURFACES]; |
| struct dc_flip_addrs flip_addrs[MAX_SURFACES]; |
| struct dc_stream_update stream_update; |
| } *bundle; |
| int k, m; |
| |
| bundle = kzalloc(sizeof(*bundle), GFP_KERNEL); |
| |
| if (!bundle) { |
| drm_err(dm->ddev, "Failed to allocate update bundle\n"); |
| goto cleanup; |
| } |
| |
| for (k = 0; k < dc_state->stream_count; k++) { |
| bundle->stream_update.stream = dc_state->streams[k]; |
| |
| for (m = 0; m < dc_state->stream_status->plane_count; m++) { |
| bundle->surface_updates[m].surface = |
| dc_state->stream_status->plane_states[m]; |
| bundle->surface_updates[m].surface->force_full_update = |
| true; |
| } |
| |
| update_planes_and_stream_adapter(dm->dc, |
| UPDATE_TYPE_FULL, |
| dc_state->stream_status->plane_count, |
| dc_state->streams[k], |
| &bundle->stream_update, |
| bundle->surface_updates); |
| } |
| |
| cleanup: |
| kfree(bundle); |
| } |
| |
| static int dm_resume(void *handle) |
| { |
| struct amdgpu_device *adev = handle; |
| struct drm_device *ddev = adev_to_drm(adev); |
| struct amdgpu_display_manager *dm = &adev->dm; |
| struct amdgpu_dm_connector *aconnector; |
| struct drm_connector *connector; |
| struct drm_connector_list_iter iter; |
| struct drm_crtc *crtc; |
| struct drm_crtc_state *new_crtc_state; |
| struct dm_crtc_state *dm_new_crtc_state; |
| struct drm_plane *plane; |
| struct drm_plane_state *new_plane_state; |
| struct dm_plane_state *dm_new_plane_state; |
| struct dm_atomic_state *dm_state = to_dm_atomic_state(dm->atomic_obj.state); |
| enum dc_connection_type new_connection_type = dc_connection_none; |
| struct dc_state *dc_state; |
| int i, r, j, ret; |
| bool need_hotplug = false; |
| struct dc_commit_streams_params commit_params = {}; |
| |
| if (dm->dc->caps.ips_support) { |
| dc_dmub_srv_apply_idle_power_optimizations(dm->dc, false); |
| } |
| |
| if (amdgpu_in_reset(adev)) { |
| dc_state = dm->cached_dc_state; |
| |
| /* |
| * The dc->current_state is backed up into dm->cached_dc_state |
| * before we commit 0 streams. |
| * |
| * DC will clear link encoder assignments on the real state |
| * but the changes won't propagate over to the copy we made |
| * before the 0 streams commit. |
| * |
| * DC expects that link encoder assignments are *not* valid |
| * when committing a state, so as a workaround we can copy |
| * off of the current state. |
| * |
| * We lose the previous assignments, but we had already |
| * commit 0 streams anyway. |
| */ |
| link_enc_cfg_copy(adev->dm.dc->current_state, dc_state); |
| |
| r = dm_dmub_hw_init(adev); |
| if (r) |
| DRM_ERROR("DMUB interface failed to initialize: status=%d\n", r); |
| |
| dc_dmub_srv_set_power_state(dm->dc->ctx->dmub_srv, DC_ACPI_CM_POWER_STATE_D0); |
| dc_set_power_state(dm->dc, DC_ACPI_CM_POWER_STATE_D0); |
| |
| dc_resume(dm->dc); |
| |
| amdgpu_dm_irq_resume_early(adev); |
| |
| for (i = 0; i < dc_state->stream_count; i++) { |
| dc_state->streams[i]->mode_changed = true; |
| for (j = 0; j < dc_state->stream_status[i].plane_count; j++) { |
| dc_state->stream_status[i].plane_states[j]->update_flags.raw |
| = 0xffffffff; |
| } |
| } |
| |
| if (dc_is_dmub_outbox_supported(adev->dm.dc)) { |
| amdgpu_dm_outbox_init(adev); |
| dc_enable_dmub_outbox(adev->dm.dc); |
| } |
| |
| commit_params.streams = dc_state->streams; |
| commit_params.stream_count = dc_state->stream_count; |
| dc_exit_ips_for_hw_access(dm->dc); |
| WARN_ON(!dc_commit_streams(dm->dc, &commit_params)); |
| |
| dm_gpureset_commit_state(dm->cached_dc_state, dm); |
| |
| dm_gpureset_toggle_interrupts(adev, dm->cached_dc_state, true); |
| |
| dc_state_release(dm->cached_dc_state); |
| dm->cached_dc_state = NULL; |
| |
| amdgpu_dm_irq_resume_late(adev); |
| |
| mutex_unlock(&dm->dc_lock); |
| |
| return 0; |
| } |
| /* Recreate dc_state - DC invalidates it when setting power state to S3. */ |
| dc_state_release(dm_state->context); |
| dm_state->context = dc_state_create(dm->dc, NULL); |
| /* TODO: Remove dc_state->dccg, use dc->dccg directly. */ |
| |
| /* Before powering on DC we need to re-initialize DMUB. */ |
| dm_dmub_hw_resume(adev); |
| |
| /* Re-enable outbox interrupts for DPIA. */ |
| if (dc_is_dmub_outbox_supported(adev->dm.dc)) { |
| amdgpu_dm_outbox_init(adev); |
| dc_enable_dmub_outbox(adev->dm.dc); |
| } |
| |
| /* power on hardware */ |
| dc_dmub_srv_set_power_state(dm->dc->ctx->dmub_srv, DC_ACPI_CM_POWER_STATE_D0); |
| dc_set_power_state(dm->dc, DC_ACPI_CM_POWER_STATE_D0); |
| |
| /* program HPD filter */ |
| dc_resume(dm->dc); |
| |
| /* |
| * early enable HPD Rx IRQ, should be done before set mode as short |
| * pulse interrupts are used for MST |
| */ |
| amdgpu_dm_irq_resume_early(adev); |
| |
| /* On resume we need to rewrite the MSTM control bits to enable MST*/ |
| s3_handle_mst(ddev, false); |
| |
| /* Do detection*/ |
| drm_connector_list_iter_begin(ddev, &iter); |
| drm_for_each_connector_iter(connector, &iter) { |
| |
| if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK) |
| continue; |
| |
| aconnector = to_amdgpu_dm_connector(connector); |
| |
| if (!aconnector->dc_link) |
| continue; |
| |
| /* |
| * this is the case when traversing through already created end sink |
| * MST connectors, should be skipped |
| */ |
| if (aconnector->mst_root) |
| continue; |
| |
| mutex_lock(&aconnector->hpd_lock); |
| if (!dc_link_detect_connection_type(aconnector->dc_link, &new_connection_type)) |
| DRM_ERROR("KMS: Failed to detect connector\n"); |
| |
| if (aconnector->base.force && new_connection_type == dc_connection_none) { |
| emulated_link_detect(aconnector->dc_link); |
| } else { |
| mutex_lock(&dm->dc_lock); |
| dc_exit_ips_for_hw_access(dm->dc); |
| dc_link_detect(aconnector->dc_link, DETECT_REASON_RESUMEFROMS3S4); |
| mutex_unlock(&dm->dc_lock); |
| } |
| |
| if (aconnector->fake_enable && aconnector->dc_link->local_sink) |
| aconnector->fake_enable = false; |
| |
| if (aconnector->dc_sink) |
| dc_sink_release(aconnector->dc_sink); |
| aconnector->dc_sink = NULL; |
| amdgpu_dm_update_connector_after_detect(aconnector); |
| mutex_unlock(&aconnector->hpd_lock); |
| } |
| drm_connector_list_iter_end(&iter); |
| |
| /* Force mode set in atomic commit */ |
| for_each_new_crtc_in_state(dm->cached_state, crtc, new_crtc_state, i) |
| new_crtc_state->active_changed = true; |
| |
| /* |
| * atomic_check is expected to create the dc states. We need to release |
| * them here, since they were duplicated as part of the suspend |
| * procedure. |
| */ |
| for_each_new_crtc_in_state(dm->cached_state, crtc, new_crtc_state, i) { |
| dm_new_crtc_state = to_dm_crtc_state(new_crtc_state); |
| if (dm_new_crtc_state->stream) { |
| WARN_ON(kref_read(&dm_new_crtc_state->stream->refcount) > 1); |
| dc_stream_release(dm_new_crtc_state->stream); |
| dm_new_crtc_state->stream = NULL; |
| } |
| dm_new_crtc_state->base.color_mgmt_changed = true; |
| } |
| |
| for_each_new_plane_in_state(dm->cached_state, plane, new_plane_state, i) { |
| dm_new_plane_state = to_dm_plane_state(new_plane_state); |
| if (dm_new_plane_state->dc_state) { |
| WARN_ON(kref_read(&dm_new_plane_state->dc_state->refcount) > 1); |
| dc_plane_state_release(dm_new_plane_state->dc_state); |
| dm_new_plane_state->dc_state = NULL; |
| } |
| } |
| |
| drm_atomic_helper_resume(ddev, dm->cached_state); |
| |
| dm->cached_state = NULL; |
| |
| /* Do mst topology probing after resuming cached state*/ |
| drm_connector_list_iter_begin(ddev, &iter); |
| drm_for_each_connector_iter(connector, &iter) { |
| |
| if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK) |
| continue; |
| |
| aconnector = to_amdgpu_dm_connector(connector); |
| if (aconnector->dc_link->type != dc_connection_mst_branch || |
| aconnector->mst_root) |
| continue; |
| |
| ret = drm_dp_mst_topology_mgr_resume(&aconnector->mst_mgr, true); |
| |
| if (ret < 0) { |
| dm_helpers_dp_mst_stop_top_mgr(aconnector->dc_link->ctx, |
| aconnector->dc_link); |
| need_hotplug = true; |
| } |
| } |
| drm_connector_list_iter_end(&iter); |
| |
| if (need_hotplug) |
| drm_kms_helper_hotplug_event(ddev); |
| |
| amdgpu_dm_irq_resume_late(adev); |
| |
| amdgpu_dm_smu_write_watermarks_table(adev); |
| |
| return 0; |
| } |
| |
| /** |
| * DOC: DM Lifecycle |
| * |
| * DM (and consequently DC) is registered in the amdgpu base driver as a IP |
| * block. When CONFIG_DRM_AMD_DC is enabled, the DM device IP block is added to |
| * the base driver's device list to be initialized and torn down accordingly. |
| * |
| * The functions to do so are provided as hooks in &struct amd_ip_funcs. |
| */ |
| |
| static const struct amd_ip_funcs amdgpu_dm_funcs = { |
| .name = "dm", |
| .early_init = dm_early_init, |
| .late_init = dm_late_init, |
| .sw_init = dm_sw_init, |
| .sw_fini = dm_sw_fini, |
| .early_fini = amdgpu_dm_early_fini, |
| .hw_init = dm_hw_init, |
| .hw_fini = dm_hw_fini, |
| .suspend = dm_suspend, |
| .resume = dm_resume, |
| .is_idle = dm_is_idle, |
| .wait_for_idle = dm_wait_for_idle, |
| .check_soft_reset = dm_check_soft_reset, |
| .soft_reset = dm_soft_reset, |
| .set_clockgating_state = dm_set_clockgating_state, |
| .set_powergating_state = dm_set_powergating_state, |
| .dump_ip_state = NULL, |
| .print_ip_state = NULL, |
| }; |
| |
| const struct amdgpu_ip_block_version dm_ip_block = { |
| .type = AMD_IP_BLOCK_TYPE_DCE, |
| .major = 1, |
| .minor = 0, |
| .rev = 0, |
| .funcs = &amdgpu_dm_funcs, |
| }; |
| |
| |
| /** |
| * DOC: atomic |
| * |
| * *WIP* |
| */ |
| |
| static const struct drm_mode_config_funcs amdgpu_dm_mode_funcs = { |
| .fb_create = amdgpu_display_user_framebuffer_create, |
| .get_format_info = amdgpu_dm_plane_get_format_info, |
| .atomic_check = amdgpu_dm_atomic_check, |
| .atomic_commit = drm_atomic_helper_commit, |
| }; |
| |
| static struct drm_mode_config_helper_funcs amdgpu_dm_mode_config_helperfuncs = { |
| .atomic_commit_tail = amdgpu_dm_atomic_commit_tail, |
| .atomic_commit_setup = drm_dp_mst_atomic_setup_commit, |
| }; |
| |
| static void update_connector_ext_caps(struct amdgpu_dm_connector *aconnector) |
| { |
| struct amdgpu_dm_backlight_caps *caps; |
| struct drm_connector *conn_base; |
| struct amdgpu_device *adev; |
| struct drm_luminance_range_info *luminance_range; |
| |
| if (aconnector->bl_idx == -1 || |
| aconnector->dc_link->connector_signal != SIGNAL_TYPE_EDP) |
| return; |
| |
| conn_base = &aconnector->base; |
| adev = drm_to_adev(conn_base->dev); |
| |
| caps = &adev->dm.backlight_caps[aconnector->bl_idx]; |
| caps->ext_caps = &aconnector->dc_link->dpcd_sink_ext_caps; |
| caps->aux_support = false; |
| |
| if (caps->ext_caps->bits.oled == 1 |
| /* |
| * || |
| * caps->ext_caps->bits.sdr_aux_backlight_control == 1 || |
| * caps->ext_caps->bits.hdr_aux_backlight_control == 1 |
| */) |
| caps->aux_support = true; |
| |
| if (amdgpu_backlight == 0) |
| caps->aux_support = false; |
| else if (amdgpu_backlight == 1) |
| caps->aux_support = true; |
| |
| luminance_range = &conn_base->display_info.luminance_range; |
| |
| if (luminance_range->max_luminance) { |
| caps->aux_min_input_signal = luminance_range->min_luminance; |
| caps->aux_max_input_signal = luminance_range->max_luminance; |
| } else { |
| caps->aux_min_input_signal = 0; |
| caps->aux_max_input_signal = 512; |
| } |
| } |
| |
| void amdgpu_dm_update_connector_after_detect( |
| struct amdgpu_dm_connector *aconnector) |
| { |
| struct drm_connector *connector = &aconnector->base; |
| struct drm_device *dev = connector->dev; |
| struct dc_sink *sink; |
| |
| /* MST handled by drm_mst framework */ |
| if (aconnector->mst_mgr.mst_state == true) |
| return; |
| |
| sink = aconnector->dc_link->local_sink; |
| if (sink) |
| dc_sink_retain(sink); |
| |
| /* |
| * Edid mgmt connector gets first update only in mode_valid hook and then |
| * the connector sink is set to either fake or physical sink depends on link status. |
| * Skip if already done during boot. |
| */ |
| if (aconnector->base.force != DRM_FORCE_UNSPECIFIED |
| && aconnector->dc_em_sink) { |
| |
| /* |
| * For S3 resume with headless use eml_sink to fake stream |
| * because on resume connector->sink is set to NULL |
| */ |
| mutex_lock(&dev->mode_config.mutex); |
| |
| if (sink) { |
| if (aconnector->dc_sink) { |
| amdgpu_dm_update_freesync_caps(connector, NULL); |
| /* |
| * retain and release below are used to |
| * bump up refcount for sink because the link doesn't point |
| * to it anymore after disconnect, so on next crtc to connector |
| * reshuffle by UMD we will get into unwanted dc_sink release |
| */ |
| dc_sink_release(aconnector->dc_sink); |
| } |
| aconnector->dc_sink = sink; |
| dc_sink_retain(aconnector->dc_sink); |
| amdgpu_dm_update_freesync_caps(connector, |
| aconnector->edid); |
| } else { |
| amdgpu_dm_update_freesync_caps(connector, NULL); |
| if (!aconnector->dc_sink) { |
| aconnector->dc_sink = aconnector->dc_em_sink; |
| dc_sink_retain(aconnector->dc_sink); |
| } |
| } |
| |
| mutex_unlock(&dev->mode_config.mutex); |
| |
| if (sink) |
| dc_sink_release(sink); |
| return; |
| } |
| |
| /* |
| * TODO: temporary guard to look for proper fix |
| * if this sink is MST sink, we should not do anything |
| */ |
| if (sink && sink->sink_signal == SIGNAL_TYPE_DISPLAY_PORT_MST) { |
| dc_sink_release(sink); |
| return; |
| } |
| |
| if (aconnector->dc_sink == sink) { |
| /* |
| * We got a DP short pulse (Link Loss, DP CTS, etc...). |
| * Do nothing!! |
| */ |
| drm_dbg_kms(dev, "DCHPD: connector_id=%d: dc_sink didn't change.\n", |
| aconnector->connector_id); |
| if (sink) |
| dc_sink_release(sink); |
| return; |
| } |
| |
| drm_dbg_kms(dev, "DCHPD: connector_id=%d: Old sink=%p New sink=%p\n", |
| aconnector->connector_id, aconnector->dc_sink, sink); |
| |
| mutex_lock(&dev->mode_config.mutex); |
| |
| /* |
| * 1. Update status of the drm connector |
| * 2. Send an event and let userspace tell us what to do |
| */ |
| if (sink) { |
| /* |
| * TODO: check if we still need the S3 mode update workaround. |
| * If yes, put it here. |
| */ |
| if (aconnector->dc_sink) { |
| amdgpu_dm_update_freesync_caps(connector, NULL); |
| dc_sink_release(aconnector->dc_sink); |
| } |
| |
| aconnector->dc_sink = sink; |
| dc_sink_retain(aconnector->dc_sink); |
| if (sink->dc_edid.length == 0) { |
| aconnector->edid = NULL; |
| if (aconnector->dc_link->aux_mode) { |
| drm_dp_cec_unset_edid( |
| &aconnector->dm_dp_aux.aux); |
| } |
| } else { |
| aconnector->edid = |
| (struct edid *)sink->dc_edid.raw_edid; |
| |
| if (aconnector->dc_link->aux_mode) |
| drm_dp_cec_set_edid(&aconnector->dm_dp_aux.aux, |
| aconnector->edid); |
| } |
| |
| if (!aconnector->timing_requested) { |
| aconnector->timing_requested = |
| kzalloc(sizeof(struct dc_crtc_timing), GFP_KERNEL); |
| if (!aconnector->timing_requested) |
| drm_err(dev, |
| "failed to create aconnector->requested_timing\n"); |
| } |
| |
| drm_connector_update_edid_property(connector, aconnector->edid); |
| amdgpu_dm_update_freesync_caps(connector, aconnector->edid); |
| update_connector_ext_caps(aconnector); |
| } else { |
| drm_dp_cec_unset_edid(&aconnector->dm_dp_aux.aux); |
| amdgpu_dm_update_freesync_caps(connector, NULL); |
| drm_connector_update_edid_property(connector, NULL); |
| aconnector->num_modes = 0; |
| dc_sink_release(aconnector->dc_sink); |
| aconnector->dc_sink = NULL; |
| aconnector->edid = NULL; |
| kfree(aconnector->timing_requested); |
| aconnector->timing_requested = NULL; |
| /* Set CP to DESIRED if it was ENABLED, so we can re-enable it again on hotplug */ |
| if (connector->state->content_protection == DRM_MODE_CONTENT_PROTECTION_ENABLED) |
| connector->state->content_protection = DRM_MODE_CONTENT_PROTECTION_DESIRED; |
| } |
| |
| mutex_unlock(&dev->mode_config.mutex); |
| |
| update_subconnector_property(aconnector); |
| |
| if (sink) |
| dc_sink_release(sink); |
| } |
| |
| static void handle_hpd_irq_helper(struct amdgpu_dm_connector *aconnector) |
| { |
| struct drm_connector *connector = &aconnector->base; |
| struct drm_device *dev = connector->dev; |
| enum dc_connection_type new_connection_type = dc_connection_none; |
| struct amdgpu_device *adev = drm_to_adev(dev); |
| struct dm_connector_state *dm_con_state = to_dm_connector_state(connector->state); |
| struct dc *dc = aconnector->dc_link->ctx->dc; |
| bool ret = false; |
| |
| if (adev->dm.disable_hpd_irq) |
| return; |
| |
| /* |
| * In case of failure or MST no need to update connector status or notify the OS |
| * since (for MST case) MST does this in its own context. |
| */ |
| mutex_lock(&aconnector->hpd_lock); |
| |
| if (adev->dm.hdcp_workqueue) { |
| hdcp_reset_display(adev->dm.hdcp_workqueue, aconnector->dc_link->link_index); |
| dm_con_state->update_hdcp = true; |
| } |
| if (aconnector->fake_enable) |
| aconnector->fake_enable = false; |
| |
| aconnector->timing_changed = false; |
| |
| if (!dc_link_detect_connection_type(aconnector->dc_link, &new_connection_type)) |
| DRM_ERROR("KMS: Failed to detect connector\n"); |
| |
| if (aconnector->base.force && new_connection_type == dc_connection_none) { |
| emulated_link_detect(aconnector->dc_link); |
| |
| drm_modeset_lock_all(dev); |
| dm_restore_drm_connector_state(dev, connector); |
| drm_modeset_unlock_all(dev); |
| |
| if (aconnector->base.force == DRM_FORCE_UNSPECIFIED) |
| drm_kms_helper_connector_hotplug_event(connector); |
| } else { |
| mutex_lock(&adev->dm.dc_lock); |
| dc_exit_ips_for_hw_access(dc); |
| ret = dc_link_detect(aconnector->dc_link, DETECT_REASON_HPD); |
| mutex_unlock(&adev->dm.dc_lock); |
| if (ret) { |
| amdgpu_dm_update_connector_after_detect(aconnector); |
| |
| drm_modeset_lock_all(dev); |
| dm_restore_drm_connector_state(dev, connector); |
| drm_modeset_unlock_all(dev); |
| |
| if (aconnector->base.force == DRM_FORCE_UNSPECIFIED) |
| drm_kms_helper_connector_hotplug_event(connector); |
| } |
| } |
| mutex_unlock(&aconnector->hpd_lock); |
| |
| } |
| |
| static void handle_hpd_irq(void *param) |
| { |
| struct amdgpu_dm_connector *aconnector = (struct amdgpu_dm_connector *)param; |
| |
| handle_hpd_irq_helper(aconnector); |
| |
| } |
| |
| static void schedule_hpd_rx_offload_work(struct hpd_rx_irq_offload_work_queue *offload_wq, |
| union hpd_irq_data hpd_irq_data) |
| { |
| struct hpd_rx_irq_offload_work *offload_work = |
| kzalloc(sizeof(*offload_work), GFP_KERNEL); |
| |
| if (!offload_work) { |
| DRM_ERROR("Failed to allocate hpd_rx_irq_offload_work.\n"); |
| return; |
| } |
| |
| INIT_WORK(&offload_work->work, dm_handle_hpd_rx_offload_work); |
| offload_work->data = hpd_irq_data; |
| offload_work->offload_wq = offload_wq; |
| |
| queue_work(offload_wq->wq, &offload_work->work); |
| DRM_DEBUG_KMS("queue work to handle hpd_rx offload work"); |
| } |
| |
| static void handle_hpd_rx_irq(void *param) |
| { |
| struct amdgpu_dm_connector *aconnector = (struct amdgpu_dm_connector *)param; |
| struct drm_connector *connector = &aconnector->base; |
| struct drm_device *dev = connector->dev; |
| struct dc_link *dc_link = aconnector->dc_link; |
| bool is_mst_root_connector = aconnector->mst_mgr.mst_state; |
| bool result = false; |
| enum dc_connection_type new_connection_type = dc_connection_none; |
| struct amdgpu_device *adev = drm_to_adev(dev); |
| union hpd_irq_data hpd_irq_data; |
| bool link_loss = false; |
| bool has_left_work = false; |
| int idx = dc_link->link_index; |
| struct hpd_rx_irq_offload_work_queue *offload_wq = &adev->dm.hpd_rx_offload_wq[idx]; |
| struct dc *dc = aconnector->dc_link->ctx->dc; |
| |
| memset(&hpd_irq_data, 0, sizeof(hpd_irq_data)); |
| |
| if (adev->dm.disable_hpd_irq) |
| return; |
| |
| /* |
| * TODO:Temporary add mutex to protect hpd interrupt not have a gpio |
| * conflict, after implement i2c helper, this mutex should be |
| * retired. |
| */ |
| mutex_lock(&aconnector->hpd_lock); |
| |
| result = dc_link_handle_hpd_rx_irq(dc_link, &hpd_irq_data, |
| &link_loss, true, &has_left_work); |
| |
| if (!has_left_work) |
| goto out; |
| |
| if (hpd_irq_data.bytes.device_service_irq.bits.AUTOMATED_TEST) { |
| schedule_hpd_rx_offload_work(offload_wq, hpd_irq_data); |
| goto out; |
| } |
| |
| if (dc_link_dp_allow_hpd_rx_irq(dc_link)) { |
| if (hpd_irq_data.bytes.device_service_irq.bits.UP_REQ_MSG_RDY || |
| hpd_irq_data.bytes.device_service_irq.bits.DOWN_REP_MSG_RDY) { |
| bool skip = false; |
| |
| /* |
| * DOWN_REP_MSG_RDY is also handled by polling method |
| * mgr->cbs->poll_hpd_irq() |
| */ |
| spin_lock(&offload_wq->offload_lock); |
| skip = offload_wq->is_handling_mst_msg_rdy_event; |
| |
| if (!skip) |
| offload_wq->is_handling_mst_msg_rdy_event = true; |
| |
| spin_unlock(&offload_wq->offload_lock); |
| |
| if (!skip) |
| schedule_hpd_rx_offload_work(offload_wq, hpd_irq_data); |
| |
| goto out; |
| } |
| |
| if (link_loss) { |
| bool skip = false; |
| |
| spin_lock(&offload_wq->offload_lock); |
| skip = offload_wq->is_handling_link_loss; |
| |
| if (!skip) |
| offload_wq->is_handling_link_loss = true; |
| |
| spin_unlock(&offload_wq->offload_lock); |
| |
| if (!skip) |
| schedule_hpd_rx_offload_work(offload_wq, hpd_irq_data); |
| |
| goto out; |
| } |
| } |
| |
| out: |
| if (result && !is_mst_root_connector) { |
| /* Downstream Port status changed. */ |
| if (!dc_link_detect_connection_type(dc_link, &new_connection_type)) |
| DRM_ERROR("KMS: Failed to detect connector\n"); |
| |
| if (aconnector->base.force && new_connection_type == dc_connection_none) { |
| emulated_link_detect(dc_link); |
| |
| if (aconnector->fake_enable) |
| aconnector->fake_enable = false; |
| |
| amdgpu_dm_update_connector_after_detect(aconnector); |
| |
| |
| drm_modeset_lock_all(dev); |
| dm_restore_drm_connector_state(dev, connector); |
| drm_modeset_unlock_all(dev); |
| |
| drm_kms_helper_connector_hotplug_event(connector); |
| } else { |
| bool ret = false; |
| |
| mutex_lock(&adev->dm.dc_lock); |
| dc_exit_ips_for_hw_access(dc); |
| ret = dc_link_detect(dc_link, DETECT_REASON_HPDRX); |
| mutex_unlock(&adev->dm.dc_lock); |
| |
| if (ret) { |
| if (aconnector->fake_enable) |
| aconnector->fake_enable = false; |
| |
| amdgpu_dm_update_connector_after_detect(aconnector); |
| |
| drm_modeset_lock_all(dev); |
| dm_restore_drm_connector_state(dev, connector); |
| drm_modeset_unlock_all(dev); |
| |
| drm_kms_helper_connector_hotplug_event(connector); |
| } |
| } |
| } |
| if (hpd_irq_data.bytes.device_service_irq.bits.CP_IRQ) { |
| if (adev->dm.hdcp_workqueue) |
| hdcp_handle_cpirq(adev->dm.hdcp_workqueue, aconnector->base.index); |
| } |
| |
| if (dc_link->type != dc_connection_mst_branch) |
| drm_dp_cec_irq(&aconnector->dm_dp_aux.aux); |
| |
| mutex_unlock(&aconnector->hpd_lock); |
| } |
| |
| static int register_hpd_handlers(struct amdgpu_device *adev) |
| { |
| struct drm_device *dev = adev_to_drm(adev); |
| struct drm_connector *connector; |
| struct amdgpu_dm_connector *aconnector; |
| const struct dc_link *dc_link; |
| struct dc_interrupt_params int_params = {0}; |
| |
| int_params.requested_polarity = INTERRUPT_POLARITY_DEFAULT; |
| int_params.current_polarity = INTERRUPT_POLARITY_DEFAULT; |
| |
| if (dc_is_dmub_outbox_supported(adev->dm.dc)) { |
| if (!register_dmub_notify_callback(adev, DMUB_NOTIFICATION_HPD, |
| dmub_hpd_callback, true)) { |
| DRM_ERROR("amdgpu: fail to register dmub hpd callback"); |
| return -EINVAL; |
| } |
| |
| if (!register_dmub_notify_callback(adev, DMUB_NOTIFICATION_HPD_IRQ, |
| dmub_hpd_callback, true)) { |
| DRM_ERROR("amdgpu: fail to register dmub hpd callback"); |
| return -EINVAL; |
| } |
| } |
| |
| list_for_each_entry(connector, |
| &dev->mode_config.connector_list, head) { |
| |
| if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK) |
| continue; |
| |
| aconnector = to_amdgpu_dm_connector(connector); |
| dc_link = aconnector->dc_link; |
| |
| if (dc_link->irq_source_hpd != DC_IRQ_SOURCE_INVALID) { |
| int_params.int_context = INTERRUPT_LOW_IRQ_CONTEXT; |
| int_params.irq_source = dc_link->irq_source_hpd; |
| |
| if (int_params.irq_source == DC_IRQ_SOURCE_INVALID || |
| int_params.irq_source < DC_IRQ_SOURCE_HPD1 || |
| int_params.irq_source > DC_IRQ_SOURCE_HPD6) { |
| DRM_ERROR("Failed to register hpd irq!\n"); |
| return -EINVAL; |
| } |
| |
| if (!amdgpu_dm_irq_register_interrupt(adev, &int_params, |
| handle_hpd_irq, (void *) aconnector)) |
| return -ENOMEM; |
| } |
| |
| if (dc_link->irq_source_hpd_rx != DC_IRQ_SOURCE_INVALID) { |
| |
| /* Also register for DP short pulse (hpd_rx). */ |
| int_params.int_context = INTERRUPT_LOW_IRQ_CONTEXT; |
| int_params.irq_source = dc_link->irq_source_hpd_rx; |
| |
| if (int_params.irq_source == DC_IRQ_SOURCE_INVALID || |
| int_params.irq_source < DC_IRQ_SOURCE_HPD1RX || |
| int_params.irq_source > DC_IRQ_SOURCE_HPD6RX) { |
| DRM_ERROR("Failed to register hpd rx irq!\n"); |
| return -EINVAL; |
| } |
| |
| if (!amdgpu_dm_irq_register_interrupt(adev, &int_params, |
| handle_hpd_rx_irq, (void *) aconnector)) |
| return -ENOMEM; |
| } |
| } |
| return 0; |
| } |
| |
| #if defined(CONFIG_DRM_AMD_DC_SI) |
| /* Register IRQ sources and initialize IRQ callbacks */ |
| static int dce60_register_irq_handlers(struct amdgpu_device *adev) |
| { |
| struct dc *dc = adev->dm.dc; |
| struct common_irq_params *c_irq_params; |
| struct dc_interrupt_params int_params = {0}; |
| int r; |
| int i; |
| unsigned int client_id = AMDGPU_IRQ_CLIENTID_LEGACY; |
| |
| int_params.requested_polarity = INTERRUPT_POLARITY_DEFAULT; |
| int_params.current_polarity = INTERRUPT_POLARITY_DEFAULT; |
| |
| /* |
| * Actions of amdgpu_irq_add_id(): |
| * 1. Register a set() function with base driver. |
| * Base driver will call set() function to enable/disable an |
| * interrupt in DC hardware. |
| * 2. Register amdgpu_dm_irq_handler(). |
| * Base driver will call amdgpu_dm_irq_handler() for ALL interrupts |
| * coming from DC hardware. |
| * amdgpu_dm_irq_handler() will re-direct the interrupt to DC |
| * for acknowledging and handling. |
| */ |
| |
| /* Use VBLANK interrupt */ |
| for (i = 0; i < adev->mode_info.num_crtc; i++) { |
| r = amdgpu_irq_add_id(adev, client_id, i + 1, &adev->crtc_irq); |
| if (r) { |
| DRM_ERROR("Failed to add crtc irq id!\n"); |
| return r; |
| } |
| |
| int_params.int_context = INTERRUPT_HIGH_IRQ_CONTEXT; |
| int_params.irq_source = |
| dc_interrupt_to_irq_source(dc, i + 1, 0); |
| |
| if (int_params.irq_source == DC_IRQ_SOURCE_INVALID || |
| int_params.irq_source < DC_IRQ_SOURCE_VBLANK1 || |
| int_params.irq_source > DC_IRQ_SOURCE_VBLANK6) { |
| DRM_ERROR("Failed to register vblank irq!\n"); |
| return -EINVAL; |
| } |
| |
| c_irq_params = &adev->dm.vblank_params[int_params.irq_source - DC_IRQ_SOURCE_VBLANK1]; |
| |
| c_irq_params->adev = adev; |
| c_irq_params->irq_src = int_params.irq_source; |
| |
| if (!amdgpu_dm_irq_register_interrupt(adev, &int_params, |
| dm_crtc_high_irq, c_irq_params)) |
| return -ENOMEM; |
| } |
| |
| /* Use GRPH_PFLIP interrupt */ |
| for (i = VISLANDS30_IV_SRCID_D1_GRPH_PFLIP; |
| i <= VISLANDS30_IV_SRCID_D6_GRPH_PFLIP; i += 2) { |
| r = amdgpu_irq_add_id(adev, client_id, i, &adev->pageflip_irq); |
| if (r) { |
| DRM_ERROR("Failed to add page flip irq id!\n"); |
| return r; |
| } |
| |
| int_params.int_context = INTERRUPT_HIGH_IRQ_CONTEXT; |
| int_params.irq_source = |
| dc_interrupt_to_irq_source(dc, i, 0); |
| |
| if (int_params.irq_source == DC_IRQ_SOURCE_INVALID || |
| int_params.irq_source < DC_IRQ_SOURCE_PFLIP_FIRST || |
| int_params.irq_source > DC_IRQ_SOURCE_PFLIP_LAST) { |
| DRM_ERROR("Failed to register pflip irq!\n"); |
| return -EINVAL; |
| } |
| |
| c_irq_params = &adev->dm.pflip_params[int_params.irq_source - DC_IRQ_SOURCE_PFLIP_FIRST]; |
| |
| c_irq_params->adev = adev; |
| c_irq_params->irq_src = int_params.irq_source; |
| |
| if (!amdgpu_dm_irq_register_interrupt(adev, &int_params, |
| dm_pflip_high_irq, c_irq_params)) |
| return -ENOMEM; |
| } |
| |
| /* HPD */ |
| r = amdgpu_irq_add_id(adev, client_id, |
| VISLANDS30_IV_SRCID_HOTPLUG_DETECT_A, &adev->hpd_irq); |
| if (r) { |
| DRM_ERROR("Failed to add hpd irq id!\n"); |
| return r; |
| } |
| |
| r = register_hpd_handlers(adev); |
| |
| return r; |
| } |
| #endif |
| |
| /* Register IRQ sources and initialize IRQ callbacks */ |
| static int dce110_register_irq_handlers(struct amdgpu_device *adev) |
| { |
| struct dc *dc = adev->dm.dc; |
| struct common_irq_params *c_irq_params; |
| struct dc_interrupt_params int_params = {0}; |
| int r; |
| int i; |
| unsigned int client_id = AMDGPU_IRQ_CLIENTID_LEGACY; |
| |
| if (adev->family >= AMDGPU_FAMILY_AI) |
| client_id = SOC15_IH_CLIENTID_DCE; |
| |
| int_params.requested_polarity = INTERRUPT_POLARITY_DEFAULT; |
| int_params.current_polarity = INTERRUPT_POLARITY_DEFAULT; |
| |
| /* |
| * Actions of amdgpu_irq_add_id(): |
| * 1. Register a set() function with base driver. |
| * Base driver will call set() function to enable/disable an |
| * interrupt in DC hardware. |
| * 2. Register amdgpu_dm_irq_handler(). |
| * Base driver will call amdgpu_dm_irq_handler() for ALL interrupts |
| * coming from DC hardware. |
| * amdgpu_dm_irq_handler() will re-direct the interrupt to DC |
| * for acknowledging and handling. |
| */ |
| |
| /* Use VBLANK interrupt */ |
| for (i = VISLANDS30_IV_SRCID_D1_VERTICAL_INTERRUPT0; i <= VISLANDS30_IV_SRCID_D6_VERTICAL_INTERRUPT0; i++) { |
| r = amdgpu_irq_add_id(adev, client_id, i, &adev->crtc_irq); |
| if (r) { |
| DRM_ERROR("Failed to add crtc irq id!\n"); |
| return r; |
| } |
| |
| int_params.int_context = INTERRUPT_HIGH_IRQ_CONTEXT; |
| int_params.irq_source = |
| dc_interrupt_to_irq_source(dc, i, 0); |
| |
| if (int_params.irq_source == DC_IRQ_SOURCE_INVALID || |
| int_params.irq_source < DC_IRQ_SOURCE_VBLANK1 || |
| int_params.irq_source > DC_IRQ_SOURCE_VBLANK6) { |
| DRM_ERROR("Failed to register vblank irq!\n"); |
| return -EINVAL; |
| } |
| |
| c_irq_params = &adev->dm.vblank_params[int_params.irq_source - DC_IRQ_SOURCE_VBLANK1]; |
| |
| c_irq_params->adev = adev; |
| c_irq_params->irq_src = int_params.irq_source; |
| |
| if (!amdgpu_dm_irq_register_interrupt(adev, &int_params, |
| dm_crtc_high_irq, c_irq_params)) |
| return -ENOMEM; |
| } |
| |
| /* Use VUPDATE interrupt */ |
| for (i = VISLANDS30_IV_SRCID_D1_V_UPDATE_INT; i <= VISLANDS30_IV_SRCID_D6_V_UPDATE_INT; i += 2) { |
| r = amdgpu_irq_add_id(adev, client_id, i, &adev->vupdate_irq); |
| if (r) { |
| DRM_ERROR("Failed to add vupdate irq id!\n"); |
| return r; |
| } |
| |
| int_params.int_context = INTERRUPT_HIGH_IRQ_CONTEXT; |
| int_params.irq_source = |
| dc_interrupt_to_irq_source(dc, i, 0); |
| |
| if (int_params.irq_source == DC_IRQ_SOURCE_INVALID || |
| int_params.irq_source < DC_IRQ_SOURCE_VUPDATE1 || |
| int_params.irq_source > DC_IRQ_SOURCE_VUPDATE6) { |
| DRM_ERROR("Failed to register vupdate irq!\n"); |
| return -EINVAL; |
| } |
| |
| c_irq_params = &adev->dm.vupdate_params[int_params.irq_source - DC_IRQ_SOURCE_VUPDATE1]; |
| |
| c_irq_params->adev = adev; |
| c_irq_params->irq_src = int_params.irq_source; |
| |
| if (!amdgpu_dm_irq_register_interrupt(adev, &int_params, |
| dm_vupdate_high_irq, c_irq_params)) |
| return -ENOMEM; |
| } |
| |
| /* Use GRPH_PFLIP interrupt */ |
| for (i = VISLANDS30_IV_SRCID_D1_GRPH_PFLIP; |
| i <= VISLANDS30_IV_SRCID_D6_GRPH_PFLIP; i += 2) { |
| r = amdgpu_irq_add_id(adev, client_id, i, &adev->pageflip_irq); |
| if (r) { |
| DRM_ERROR("Failed to add page flip irq id!\n"); |
| return r; |
| } |
| |
| int_params.int_context = INTERRUPT_HIGH_IRQ_CONTEXT; |
| int_params.irq_source = |
| dc_interrupt_to_irq_source(dc, i, 0); |
| |
| if (int_params.irq_source == DC_IRQ_SOURCE_INVALID || |
| int_params.irq_source < DC_IRQ_SOURCE_PFLIP_FIRST || |
| int_params.irq_source > DC_IRQ_SOURCE_PFLIP_LAST) { |
| DRM_ERROR("Failed to register pflip irq!\n"); |
| return -EINVAL; |
| } |
| |
| c_irq_params = &adev->dm.pflip_params[int_params.irq_source - DC_IRQ_SOURCE_PFLIP_FIRST]; |
| |
| c_irq_params->adev = adev; |
| c_irq_params->irq_src = int_params.irq_source; |
| |
| if (!amdgpu_dm_irq_register_interrupt(adev, &int_params, |
| dm_pflip_high_irq, c_irq_params)) |
| return -ENOMEM; |
| } |
| |
| /* HPD */ |
| r = amdgpu_irq_add_id(adev, client_id, |
| VISLANDS30_IV_SRCID_HOTPLUG_DETECT_A, &adev->hpd_irq); |
| if (r) { |
| DRM_ERROR("Failed to add hpd irq id!\n"); |
| return r; |
| } |
| |
| r = register_hpd_handlers(adev); |
| |
| return r; |
| } |
| |
| /* Register IRQ sources and initialize IRQ callbacks */ |
| static int dcn10_register_irq_handlers(struct amdgpu_device *adev) |
| { |
| struct dc *dc = adev->dm.dc; |
| struct common_irq_params *c_irq_params; |
| struct dc_interrupt_params int_params = {0}; |
| int r; |
| int i; |
| #if defined(CONFIG_DRM_AMD_SECURE_DISPLAY) |
| static const unsigned int vrtl_int_srcid[] = { |
| DCN_1_0__SRCID__OTG1_VERTICAL_INTERRUPT0_CONTROL, |
| DCN_1_0__SRCID__OTG2_VERTICAL_INTERRUPT0_CONTROL, |
| DCN_1_0__SRCID__OTG3_VERTICAL_INTERRUPT0_CONTROL, |
| DCN_1_0__SRCID__OTG4_VERTICAL_INTERRUPT0_CONTROL, |
| DCN_1_0__SRCID__OTG5_VERTICAL_INTERRUPT0_CONTROL, |
| DCN_1_0__SRCID__OTG6_VERTICAL_INTERRUPT0_CONTROL |
| }; |
| #endif |
| |
| int_params.requested_polarity = INTERRUPT_POLARITY_DEFAULT; |
| int_params.current_polarity = INTERRUPT_POLARITY_DEFAULT; |
| |
| /* |
| * Actions of amdgpu_irq_add_id(): |
| * 1. Register a set() function with base driver. |
| * Base driver will call set() function to enable/disable an |
| * interrupt in DC hardware. |
| * 2. Register amdgpu_dm_irq_handler(). |
| * Base driver will call amdgpu_dm_irq_handler() for ALL interrupts |
| * coming from DC hardware. |
| * amdgpu_dm_irq_handler() will re-direct the interrupt to DC |
| * for acknowledging and handling. |
| */ |
| |
| /* Use VSTARTUP interrupt */ |
| for (i = DCN_1_0__SRCID__DC_D1_OTG_VSTARTUP; |
| i <= DCN_1_0__SRCID__DC_D1_OTG_VSTARTUP + adev->mode_info.num_crtc - 1; |
| i++) { |
| r = amdgpu_irq_add_id(adev, SOC15_IH_CLIENTID_DCE, i, &adev->crtc_irq); |
| |
| if (r) { |
| DRM_ERROR("Failed to add crtc irq id!\n"); |
| return r; |
| } |
| |
| int_params.int_context = INTERRUPT_HIGH_IRQ_CONTEXT; |
| int_params.irq_source = |
| dc_interrupt_to_irq_source(dc, i, 0); |
| |
| if (int_params.irq_source == DC_IRQ_SOURCE_INVALID || |
| int_params.irq_source < DC_IRQ_SOURCE_VBLANK1 || |
| int_params.irq_source > DC_IRQ_SOURCE_VBLANK6) { |
| DRM_ERROR("Failed to register vblank irq!\n"); |
| return -EINVAL; |
| } |
| |
| c_irq_params = &adev->dm.vblank_params[int_params.irq_source - DC_IRQ_SOURCE_VBLANK1]; |
| |
| c_irq_params->adev = adev; |
| c_irq_params->irq_src = int_params.irq_source; |
| |
| if (!amdgpu_dm_irq_register_interrupt(adev, &int_params, |
| dm_crtc_high_irq, c_irq_params)) |
| return -ENOMEM; |
| } |
| |
| /* Use otg vertical line interrupt */ |
| #if defined(CONFIG_DRM_AMD_SECURE_DISPLAY) |
| for (i = 0; i <= adev->mode_info.num_crtc - 1; i++) { |
| r = amdgpu_irq_add_id(adev, SOC15_IH_CLIENTID_DCE, |
| vrtl_int_srcid[i], &adev->vline0_irq); |
| |
| if (r) { |
| DRM_ERROR("Failed to add vline0 irq id!\n"); |
| return r; |
| } |
| |
| int_params.int_context = INTERRUPT_HIGH_IRQ_CONTEXT; |
| int_params.irq_source = |
| dc_interrupt_to_irq_source(dc, vrtl_int_srcid[i], 0); |
| |
| if (int_params.irq_source == DC_IRQ_SOURCE_INVALID || |
| int_params.irq_source < DC_IRQ_SOURCE_DC1_VLINE0 || |
| int_params.irq_source > DC_IRQ_SOURCE_DC6_VLINE0) { |
| DRM_ERROR("Failed to register vline0 irq!\n"); |
| return -EINVAL; |
| } |
| |
| c_irq_params = &adev->dm.vline0_params[int_params.irq_source |
| - DC_IRQ_SOURCE_DC1_VLINE0]; |
| |
| c_irq_params->adev = adev; |
| c_irq_params->irq_src = int_params.irq_source; |
| |
| if (!amdgpu_dm_irq_register_interrupt(adev, &int_params, |
| dm_dcn_vertical_interrupt0_high_irq, |
| c_irq_params)) |
| return -ENOMEM; |
| } |
| #endif |
| |
| /* Use VUPDATE_NO_LOCK interrupt on DCN, which seems to correspond to |
| * the regular VUPDATE interrupt on DCE. We want DC_IRQ_SOURCE_VUPDATEx |
| * to trigger at end of each vblank, regardless of state of the lock, |
| * matching DCE behaviour. |
| */ |
| for (i = DCN_1_0__SRCID__OTG0_IHC_V_UPDATE_NO_LOCK_INTERRUPT; |
| i <= DCN_1_0__SRCID__OTG0_IHC_V_UPDATE_NO_LOCK_INTERRUPT + adev->mode_info.num_crtc - 1; |
| i++) { |
| r = amdgpu_irq_add_id(adev, SOC15_IH_CLIENTID_DCE, i, &adev->vupdate_irq); |
| |
| if (r) { |
| DRM_ERROR("Failed to add vupdate irq id!\n"); |
| return r; |
| } |
| |
| int_params.int_context = INTERRUPT_HIGH_IRQ_CONTEXT; |
| int_params.irq_source = |
| dc_interrupt_to_irq_source(dc, i, 0); |
| |
| if (int_params.irq_source == DC_IRQ_SOURCE_INVALID || |
| int_params.irq_source < DC_IRQ_SOURCE_VUPDATE1 || |
| int_params.irq_source > DC_IRQ_SOURCE_VUPDATE6) { |
| DRM_ERROR("Failed to register vupdate irq!\n"); |
| return -EINVAL; |
| } |
| |
| c_irq_params = &adev->dm.vupdate_params[int_params.irq_source - DC_IRQ_SOURCE_VUPDATE1]; |
| |
| c_irq_params->adev = adev; |
| c_irq_params->irq_src = int_params.irq_source; |
| |
| if (!amdgpu_dm_irq_register_interrupt(adev, &int_params, |
| dm_vupdate_high_irq, c_irq_params)) |
| return -ENOMEM; |
| } |
| |
| /* Use GRPH_PFLIP interrupt */ |
| for (i = DCN_1_0__SRCID__HUBP0_FLIP_INTERRUPT; |
| i <= DCN_1_0__SRCID__HUBP0_FLIP_INTERRUPT + dc->caps.max_otg_num - 1; |
| i++) { |
| r = amdgpu_irq_add_id(adev, SOC15_IH_CLIENTID_DCE, i, &adev->pageflip_irq); |
| if (r) { |
| DRM_ERROR("Failed to add page flip irq id!\n"); |
| return r; |
| } |
| |
| int_params.int_context = INTERRUPT_HIGH_IRQ_CONTEXT; |
| int_params.irq_source = |
| dc_interrupt_to_irq_source(dc, i, 0); |
| |
| if (int_params.irq_source == DC_IRQ_SOURCE_INVALID || |
| int_params.irq_source < DC_IRQ_SOURCE_PFLIP_FIRST || |
| int_params.irq_source > DC_IRQ_SOURCE_PFLIP_LAST) { |
| DRM_ERROR("Failed to register pflip irq!\n"); |
| return -EINVAL; |
| } |
| |
| c_irq_params = &adev->dm.pflip_params[int_params.irq_source - DC_IRQ_SOURCE_PFLIP_FIRST]; |
| |
| c_irq_params->adev = adev; |
| c_irq_params->irq_src = int_params.irq_source; |
| |
| if (!amdgpu_dm_irq_register_interrupt(adev, &int_params, |
| dm_pflip_high_irq, c_irq_params)) |
| return -ENOMEM; |
| } |
| |
| /* HPD */ |
| r = amdgpu_irq_add_id(adev, SOC15_IH_CLIENTID_DCE, DCN_1_0__SRCID__DC_HPD1_INT, |
| &adev->hpd_irq); |
| if (r) { |
| DRM_ERROR("Failed to add hpd irq id!\n"); |
| return r; |
| } |
| |
| r = register_hpd_handlers(adev); |
| |
| return r; |
| } |
| /* Register Outbox IRQ sources and initialize IRQ callbacks */ |
| static int register_outbox_irq_handlers(struct amdgpu_device *adev) |
| { |
| struct dc *dc = adev->dm.dc; |
| struct common_irq_params *c_irq_params; |
| struct dc_interrupt_params int_params = {0}; |
| int r, i; |
| |
| int_params.requested_polarity = INTERRUPT_POLARITY_DEFAULT; |
| int_params.current_polarity = INTERRUPT_POLARITY_DEFAULT; |
| |
| r = amdgpu_irq_add_id(adev, SOC15_IH_CLIENTID_DCE, DCN_1_0__SRCID__DMCUB_OUTBOX_LOW_PRIORITY_READY_INT, |
| &adev->dmub_outbox_irq); |
| if (r) { |
| DRM_ERROR("Failed to add outbox irq id!\n"); |
| return r; |
| } |
| |
| if (dc->ctx->dmub_srv) { |
| i = DCN_1_0__SRCID__DMCUB_OUTBOX_LOW_PRIORITY_READY_INT; |
| int_params.int_context = INTERRUPT_LOW_IRQ_CONTEXT; |
| int_params.irq_source = |
| dc_interrupt_to_irq_source(dc, i, 0); |
| |
| c_irq_params = &adev->dm.dmub_outbox_params[0]; |
| |
| c_irq_params->adev = adev; |
| c_irq_params->irq_src = int_params.irq_source; |
| |
| if (!amdgpu_dm_irq_register_interrupt(adev, &int_params, |
| dm_dmub_outbox1_low_irq, c_irq_params)) |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Acquires the lock for the atomic state object and returns |
| * the new atomic state. |
| * |
| * This should only be called during atomic check. |
| */ |
| int dm_atomic_get_state(struct drm_atomic_state *state, |
| struct dm_atomic_state **dm_state) |
| { |
| struct drm_device *dev = state->dev; |
| struct amdgpu_device *adev = drm_to_adev(dev); |
| struct amdgpu_display_manager *dm = &adev->dm; |
| struct drm_private_state *priv_state; |
| |
| if (*dm_state) |
| return 0; |
| |
| priv_state = drm_atomic_get_private_obj_state(state, &dm->atomic_obj); |
| if (IS_ERR(priv_state)) |
| return PTR_ERR(priv_state); |
| |
| *dm_state = to_dm_atomic_state(priv_state); |
| |
| return 0; |
| } |
| |
| static struct dm_atomic_state * |
| dm_atomic_get_new_state(struct drm_atomic_state *state) |
| { |
| struct drm_device *dev = state->dev; |
| struct amdgpu_device *adev = drm_to_adev(dev); |
| struct amdgpu_display_manager *dm = &adev->dm; |
| struct drm_private_obj *obj; |
| struct drm_private_state *new_obj_state; |
| int i; |
| |
| for_each_new_private_obj_in_state(state, obj, new_obj_state, i) { |
| if (obj->funcs == dm->atomic_obj.funcs) |
| return to_dm_atomic_state(new_obj_state); |
| } |
| |
| return NULL; |
| } |
| |
| static struct drm_private_state * |
| dm_atomic_duplicate_state(struct drm_private_obj *obj) |
| { |
| struct dm_atomic_state *old_state, *new_state; |
| |
| new_state = kzalloc(sizeof(*new_state), GFP_KERNEL); |
| if (!new_state) |
| return NULL; |
| |
| __drm_atomic_helper_private_obj_duplicate_state(obj, &new_state->base); |
| |
| old_state = to_dm_atomic_state(obj->state); |
| |
| if (old_state && old_state->context) |
| new_state->context = dc_state_create_copy(old_state->context); |
| |
| if (!new_state->context) { |
| kfree(new_state); |
| return NULL; |
| } |
| |
| return &new_state->base; |
| } |
| |
| static void dm_atomic_destroy_state(struct drm_private_obj *obj, |
| struct drm_private_state *state) |
| { |
| struct dm_atomic_state *dm_state = to_dm_atomic_state(state); |
| |
| if (dm_state && dm_state->context) |
| dc_state_release(dm_state->context); |
| |
| kfree(dm_state); |
| } |
| |
| static struct drm_private_state_funcs dm_atomic_state_funcs = { |
| .atomic_duplicate_state = dm_atomic_duplicate_state, |
| .atomic_destroy_state = dm_atomic_destroy_state, |
| }; |
| |
| static int amdgpu_dm_mode_config_init(struct amdgpu_device *adev) |
| { |
| struct dm_atomic_state *state; |
| int r; |
| |
| adev->mode_info.mode_config_initialized = true; |
| |
| adev_to_drm(adev)->mode_config.funcs = (void *)&amdgpu_dm_mode_funcs; |
| adev_to_drm(adev)->mode_config.helper_private = &amdgpu_dm_mode_config_helperfuncs; |
| |
| adev_to_drm(adev)->mode_config.max_width = 16384; |
| adev_to_drm(adev)->mode_config.max_height = 16384; |
| |
| adev_to_drm(adev)->mode_config.preferred_depth = 24; |
| if (adev->asic_type == CHIP_HAWAII) |
| /* disable prefer shadow for now due to hibernation issues */ |
| adev_to_drm(adev)->mode_config.prefer_shadow = 0; |
| else |
| adev_to_drm(adev)->mode_config.prefer_shadow = 1; |
| /* indicates support for immediate flip */ |
| adev_to_drm(adev)->mode_config.async_page_flip = true; |
| |
| state = kzalloc(sizeof(*state), GFP_KERNEL); |
| if (!state) |
| return -ENOMEM; |
| |
| state->context = dc_state_create_current_copy(adev->dm.dc); |
| if (!state->context) { |
| kfree(state); |
| return -ENOMEM; |
| } |
| |
| drm_atomic_private_obj_init(adev_to_drm(adev), |
| &adev->dm.atomic_obj, |
| &state->base, |
| &dm_atomic_state_funcs); |
| |
| r = amdgpu_display_modeset_create_props(adev); |
| if (r) { |
| dc_state_release(state->context); |
| kfree(state); |
| return r; |
| } |
| |
| #ifdef AMD_PRIVATE_COLOR |
| if (amdgpu_dm_create_color_properties(adev)) { |
| dc_state_release(state->context); |
| kfree(state); |
| return -ENOMEM; |
| } |
| #endif |
| |
| r = amdgpu_dm_audio_init(adev); |
| if (r) { |
| dc_state_release(state->context); |
| kfree(state); |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| #define AMDGPU_DM_DEFAULT_MIN_BACKLIGHT 12 |
| #define AMDGPU_DM_DEFAULT_MAX_BACKLIGHT 255 |
| #define AUX_BL_DEFAULT_TRANSITION_TIME_MS 50 |
| |
| static void amdgpu_dm_update_backlight_caps(struct amdgpu_display_manager *dm, |
| int bl_idx) |
| { |
| #if defined(CONFIG_ACPI) |
| struct amdgpu_dm_backlight_caps caps; |
| |
| memset(&caps, 0, sizeof(caps)); |
| |
| if (dm->backlight_caps[bl_idx].caps_valid) |
| return; |
| |
| amdgpu_acpi_get_backlight_caps(&caps); |
| if (caps.caps_valid) { |
| dm->backlight_caps[bl_idx].caps_valid = true; |
| if (caps.aux_support) |
| return; |
| dm->backlight_caps[bl_idx].min_input_signal = caps.min_input_signal; |
| dm->backlight_caps[bl_idx].max_input_signal = caps.max_input_signal; |
| } else { |
| dm->backlight_caps[bl_idx].min_input_signal = |
| AMDGPU_DM_DEFAULT_MIN_BACKLIGHT; |
| dm->backlight_caps[bl_idx].max_input_signal = |
| AMDGPU_DM_DEFAULT_MAX_BACKLIGHT; |
| } |
| #else |
| if (dm->backlight_caps[bl_idx].aux_support) |
| return; |
| |
| dm->backlight_caps[bl_idx].min_input_signal = AMDGPU_DM_DEFAULT_MIN_BACKLIGHT; |
| dm->backlight_caps[bl_idx].max_input_signal = AMDGPU_DM_DEFAULT_MAX_BACKLIGHT; |
| #endif |
| } |
| |
| static int get_brightness_range(const struct amdgpu_dm_backlight_caps *caps, |
| unsigned int *min, unsigned int *max) |
| { |
| if (!caps) |
| return 0; |
| |
| if (caps->aux_support) { |
| // Firmware limits are in nits, DC API wants millinits. |
| *max = 1000 * caps->aux_max_input_signal; |
| *min = 1000 * caps->aux_min_input_signal; |
| } else { |
| // Firmware limits are 8-bit, PWM control is 16-bit. |
| *max = 0x101 * caps->max_input_signal; |
| *min = 0x101 * caps->min_input_signal; |
| } |
| return 1; |
| } |
| |
| static u32 convert_brightness_from_user(const struct amdgpu_dm_backlight_caps *caps, |
| uint32_t brightness) |
| { |
| unsigned int min, max; |
| |
| if (!get_brightness_range(caps, &min, &max)) |
| return brightness; |
| |
| // Rescale 0..255 to min..max |
| return min + DIV_ROUND_CLOSEST((max - min) * brightness, |
| AMDGPU_MAX_BL_LEVEL); |
| } |
| |
| static u32 convert_brightness_to_user(const struct amdgpu_dm_backlight_caps *caps, |
| uint32_t brightness) |
| { |
| unsigned int min, max; |
| |
| if (!get_brightness_range(caps, &min, &max)) |
| return brightness; |
| |
| if (brightness < min) |
| return 0; |
| // Rescale min..max to 0..255 |
| return DIV_ROUND_CLOSEST(AMDGPU_MAX_BL_LEVEL * (brightness - min), |
| max - min); |
| } |
| |
| static void amdgpu_dm_backlight_set_level(struct amdgpu_display_manager *dm, |
| int bl_idx, |
| u32 user_brightness) |
| { |
| struct amdgpu_dm_backlight_caps caps; |
| struct dc_link *link; |
| u32 brightness; |
| bool rc; |
| |
| amdgpu_dm_update_backlight_caps(dm, bl_idx); |
| caps = dm->backlight_caps[bl_idx]; |
| |
| dm->brightness[bl_idx] = user_brightness; |
| /* update scratch register */ |
| if (bl_idx == 0) |
| amdgpu_atombios_scratch_regs_set_backlight_level(dm->adev, dm->brightness[bl_idx]); |
| brightness = convert_brightness_from_user(&caps, dm->brightness[bl_idx]); |
| link = (struct dc_link *)dm->backlight_link[bl_idx]; |
| |
| /* Change brightness based on AUX property */ |
| if (caps.aux_support) { |
| rc = dc_link_set_backlight_level_nits(link, true, brightness, |
| AUX_BL_DEFAULT_TRANSITION_TIME_MS); |
| if (!rc) |
| DRM_DEBUG("DM: Failed to update backlight via AUX on eDP[%d]\n", bl_idx); |
| } else { |
| rc = dc_link_set_backlight_level(link, brightness, 0); |
| if (!rc) |
| DRM_DEBUG("DM: Failed to update backlight on eDP[%d]\n", bl_idx); |
| } |
| |
| if (rc) |
| dm->actual_brightness[bl_idx] = user_brightness; |
| } |
| |
| static int amdgpu_dm_backlight_update_status(struct backlight_device *bd) |
| { |
| struct amdgpu_display_manager *dm = bl_get_data(bd); |
| int i; |
| |
| for (i = 0; i < dm->num_of_edps; i++) { |
| if (bd == dm->backlight_dev[i]) |
| break; |
| } |
| if (i >= AMDGPU_DM_MAX_NUM_EDP) |
| i = 0; |
| amdgpu_dm_backlight_set_level(dm, i, bd->props.brightness); |
| |
| return 0; |
| } |
| |
| static u32 amdgpu_dm_backlight_get_level(struct amdgpu_display_manager *dm, |
| int bl_idx) |
| { |
| int ret; |
| struct amdgpu_dm_backlight_caps caps; |
| struct dc_link *link = (struct dc_link *)dm->backlight_link[bl_idx]; |
| |
| amdgpu_dm_update_backlight_caps(dm, bl_idx); |
| caps = dm->backlight_caps[bl_idx]; |
| |
| if (caps.aux_support) { |
| u32 avg, peak; |
| bool rc; |
| |
| rc = dc_link_get_backlight_level_nits(link, &avg, &peak); |
| if (!rc) |
| return dm->brightness[bl_idx]; |
| return convert_brightness_to_user(&caps, avg); |
| } |
| |
| ret = dc_link_get_backlight_level(link); |
| |
| if (ret == DC_ERROR_UNEXPECTED) |
| return dm->brightness[bl_idx]; |
| |
| return convert_brightness_to_user(&caps, ret); |
| } |
| |
| static int amdgpu_dm_backlight_get_brightness(struct backlight_device *bd) |
| { |
| struct amdgpu_display_manager *dm = bl_get_data(bd); |
| int i; |
| |
| for (i = 0; i < dm->num_of_edps; i++) { |
| if (bd == dm->backlight_dev[i]) |
| break; |
| } |
| if (i >= AMDGPU_DM_MAX_NUM_EDP) |
| i = 0; |
| return amdgpu_dm_backlight_get_level(dm, i); |
| } |
| |
| static const struct backlight_ops amdgpu_dm_backlight_ops = { |
| .options = BL_CORE_SUSPENDRESUME, |
| .get_brightness = amdgpu_dm_backlight_get_brightness, |
| .update_status = amdgpu_dm_backlight_update_status, |
| }; |
| |
| static void |
| amdgpu_dm_register_backlight_device(struct amdgpu_dm_connector *aconnector) |
| { |
| struct drm_device *drm = aconnector->base.dev; |
| struct amdgpu_display_manager *dm = &drm_to_adev(drm)->dm; |
| struct backlight_properties props = { 0 }; |
| struct amdgpu_dm_backlight_caps caps = { 0 }; |
| char bl_name[16]; |
| |
| if (aconnector->bl_idx == -1) |
| return; |
| |
| if (!acpi_video_backlight_use_native()) { |
| drm_info(drm, "Skipping amdgpu DM backlight registration\n"); |
| /* Try registering an ACPI video backlight device instead. */ |
| acpi_video_register_backlight(); |
| return; |
| } |
| |
| amdgpu_acpi_get_backlight_caps(&caps); |
| if (caps.caps_valid) { |
| if (power_supply_is_system_supplied() > 0) |
| props.brightness = caps.ac_level; |
| else |
| props.brightness = caps.dc_level; |
| } else |
| props.brightness = AMDGPU_MAX_BL_LEVEL; |
| |
| props.max_brightness = AMDGPU_MAX_BL_LEVEL; |
| props.type = BACKLIGHT_RAW; |
| |
| snprintf(bl_name, sizeof(bl_name), "amdgpu_bl%d", |
| drm->primary->index + aconnector->bl_idx); |
| |
| dm->backlight_dev[aconnector->bl_idx] = |
| backlight_device_register(bl_name, aconnector->base.kdev, dm, |
| &amdgpu_dm_backlight_ops, &props); |
| |
| if (IS_ERR(dm->backlight_dev[aconnector->bl_idx])) { |
| DRM_ERROR("DM: Backlight registration failed!\n"); |
| dm->backlight_dev[aconnector->bl_idx] = NULL; |
| } else |
| DRM_DEBUG_DRIVER("DM: Registered Backlight device: %s\n", bl_name); |
| } |
| |
| static int initialize_plane(struct amdgpu_display_manager *dm, |
| struct amdgpu_mode_info *mode_info, int plane_id, |
| enum drm_plane_type plane_type, |
| const struct dc_plane_cap *plane_cap) |
| { |
| struct drm_plane *plane; |
| unsigned long possible_crtcs; |
| int ret = 0; |
| |
| plane = kzalloc(sizeof(struct drm_plane), GFP_KERNEL); |
| if (!plane) { |
| DRM_ERROR("KMS: Failed to allocate plane\n"); |
| return -ENOMEM; |
| } |
| plane->type = plane_type; |
| |
| /* |
| * HACK: IGT tests expect that the primary plane for a CRTC |
| * can only have one possible CRTC. Only expose support for |
| * any CRTC if they're not going to be used as a primary plane |
| * for a CRTC - like overlay or underlay planes. |
| */ |
| possible_crtcs = 1 << plane_id; |
| if (plane_id >= dm->dc->caps.max_streams) |
| possible_crtcs = 0xff; |
| |
| ret = amdgpu_dm_plane_init(dm, plane, possible_crtcs, plane_cap); |
| |
| if (ret) { |
| DRM_ERROR("KMS: Failed to initialize plane\n"); |
| kfree(plane); |
| return ret; |
| } |
| |
| if (mode_info) |
| mode_info->planes[plane_id] = plane; |
| |
| return ret; |
| } |
| |
| |
| static void setup_backlight_device(struct amdgpu_display_manager *dm, |
| struct amdgpu_dm_connector *aconnector) |
| { |
| struct dc_link *link = aconnector->dc_link; |
| int bl_idx = dm->num_of_edps; |
| |
| if (!(link->connector_signal & (SIGNAL_TYPE_EDP | SIGNAL_TYPE_LVDS)) || |
| link->type == dc_connection_none) |
| return; |
| |
| if (dm->num_of_edps >= AMDGPU_DM_MAX_NUM_EDP) { |
| drm_warn(adev_to_drm(dm->adev), "Too much eDP connections, skipping backlight setup for additional eDPs\n"); |
| return; |
| } |
| |
| aconnector->bl_idx = bl_idx; |
| |
| amdgpu_dm_update_backlight_caps(dm, bl_idx); |
| dm->brightness[bl_idx] = AMDGPU_MAX_BL_LEVEL; |
| dm->backlight_link[bl_idx] = link; |
| dm->num_of_edps++; |
| |
| update_connector_ext_caps(aconnector); |
| } |
| |
| static void amdgpu_set_panel_orientation(struct drm_connector *connector); |
| |
| /* |
| * In this architecture, the association |
| * connector -> encoder -> crtc |
| * id not really requried. The crtc and connector will hold the |
| * display_index as an abstraction to use with DAL component |
| * |
| * Returns 0 on success |
| */ |
| static int amdgpu_dm_initialize_drm_device(struct amdgpu_device *adev) |
| { |
| struct amdgpu_display_manager *dm = &adev->dm; |
| s32 i; |
| struct amdgpu_dm_connector *aconnector = NULL; |
| struct amdgpu_encoder *aencoder = NULL; |
| struct amdgpu_mode_info *mode_info = &adev->mode_info; |
| u32 link_cnt; |
| s32 primary_planes; |
| enum dc_connection_type new_connection_type = dc_connection_none; |
| const struct dc_plane_cap *plane; |
| bool psr_feature_enabled = false; |
| bool replay_feature_enabled = false; |
| int max_overlay = dm->dc->caps.max_slave_planes; |
| |
| dm->display_indexes_num = dm->dc->caps.max_streams; |
| /* Update the actual used number of crtc */ |
| adev->mode_info.num_crtc = adev->dm.display_indexes_num; |
| |
| amdgpu_dm_set_irq_funcs(adev); |
| |
| link_cnt = dm->dc->caps.max_links; |
| if (amdgpu_dm_mode_config_init(dm->adev)) { |
| DRM_ERROR("DM: Failed to initialize mode config\n"); |
| return -EINVAL; |
| } |
| |
| /* There is one primary plane per CRTC */ |
| primary_planes = dm->dc->caps.max_streams; |
| if (primary_planes > AMDGPU_MAX_PLANES) { |
| DRM_ERROR("DM: Plane nums out of 6 planes\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * Initialize primary planes, implicit planes for legacy IOCTLS. |
| * Order is reversed to match iteration order in atomic check. |
| */ |
| for (i = (primary_planes - 1); i >= 0; i--) { |
| plane = &dm->dc->caps.planes[i]; |
| |
| if (initialize_plane(dm, mode_info, i, |
| DRM_PLANE_TYPE_PRIMARY, plane)) { |
| DRM_ERROR("KMS: Failed to initialize primary plane\n"); |
| goto fail; |
| } |
| } |
| |
| /* |
| * Initialize overlay planes, index starting after primary planes. |
| * These planes have a higher DRM index than the primary planes since |
| * they should be considered as having a higher z-order. |
| * Order is reversed to match iteration order in atomic check. |
| * |
| * Only support DCN for now, and only expose one so we don't encourage |
| * userspace to use up all the pipes. |
| */ |
| for (i = 0; i < dm->dc->caps.max_planes; ++i) { |
| struct dc_plane_cap *plane = &dm->dc->caps.planes[i]; |
| |
| /* Do not create overlay if MPO disabled */ |
| if (amdgpu_dc_debug_mask & DC_DISABLE_MPO) |
| break; |
| |
| if (plane->type != DC_PLANE_TYPE_DCN_UNIVERSAL) |
| continue; |
| |
| if (!plane->pixel_format_support.argb8888) |
| continue; |
| |
| if (max_overlay-- == 0) |
| break; |
| |
| if (initialize_plane(dm, NULL, primary_planes + i, |
| DRM_PLANE_TYPE_OVERLAY, plane)) { |
| DRM_ERROR("KMS: Failed to initialize overlay plane\n"); |
| goto fail; |
| } |
| } |
| |
| for (i = 0; i < dm->dc->caps.max_streams; i++) |
| if (amdgpu_dm_crtc_init(dm, mode_info->planes[i], i)) { |
| DRM_ERROR("KMS: Failed to initialize crtc\n"); |
| goto fail; |
| } |
| |
| /* Use Outbox interrupt */ |
| switch (amdgpu_ip_version(adev, DCE_HWIP, 0)) { |
| case IP_VERSION(3, 0, 0): |
| case IP_VERSION(3, 1, 2): |
| case IP_VERSION(3, 1, 3): |
| case IP_VERSION(3, 1, 4): |
| case IP_VERSION(3, 1, 5): |
| case IP_VERSION(3, 1, 6): |
| case IP_VERSION(3, 2, 0): |
| case IP_VERSION(3, 2, 1): |
| case IP_VERSION(2, 1, 0): |
| case IP_VERSION(3, 5, 0): |
| case IP_VERSION(3, 5, 1): |
| case IP_VERSION(4, 0, 1): |
| if (register_outbox_irq_handlers(dm->adev)) { |
| DRM_ERROR("DM: Failed to initialize IRQ\n"); |
| goto fail; |
| } |
| break; |
| default: |
| DRM_DEBUG_KMS("Unsupported DCN IP version for outbox: 0x%X\n", |
| amdgpu_ip_version(adev, DCE_HWIP, 0)); |
| } |
| |
| /* Determine whether to enable PSR support by default. */ |
| if (!(amdgpu_dc_debug_mask & DC_DISABLE_PSR)) { |
| switch (amdgpu_ip_version(adev, DCE_HWIP, 0)) { |
| case IP_VERSION(3, 1, 2): |
| case IP_VERSION(3, 1, 3): |
| case IP_VERSION(3, 1, 4): |
| case IP_VERSION(3, 1, 5): |
| case IP_VERSION(3, 1, 6): |
| case IP_VERSION(3, 2, 0): |
| case IP_VERSION(3, 2, 1): |
| case IP_VERSION(3, 5, 0): |
| case IP_VERSION(3, 5, 1): |
| case IP_VERSION(4, 0, 1): |
| psr_feature_enabled = true; |
| break; |
| default: |
| psr_feature_enabled = amdgpu_dc_feature_mask & DC_PSR_MASK; |
| break; |
| } |
| } |
| |
| /* Determine whether to enable Replay support by default. */ |
| if (!(amdgpu_dc_debug_mask & DC_DISABLE_REPLAY)) { |
| switch (amdgpu_ip_version(adev, DCE_HWIP, 0)) { |
| /* |
| * Disabled by default due to https://gitlab.freedesktop.org/drm/amd/-/issues/3344 |
| * case IP_VERSION(3, 1, 4): |
| * case IP_VERSION(3, 1, 5): |
| * case IP_VERSION(3, 1, 6): |
| * case IP_VERSION(3, 2, 0): |
| * case IP_VERSION(3, 2, 1): |
| * case IP_VERSION(3, 5, 0): |
| * case IP_VERSION(3, 5, 1): |
| * replay_feature_enabled = true; |
| * break; |
| */ |
| default: |
| replay_feature_enabled = amdgpu_dc_feature_mask & DC_REPLAY_MASK; |
| break; |
| } |
| } |
| |
| if (link_cnt > MAX_LINKS) { |
| DRM_ERROR( |
| "KMS: Cannot support more than %d display indexes\n", |
| MAX_LINKS); |
| goto fail; |
| } |
| |
| /* loops over all connectors on the board */ |
| for (i = 0; i < link_cnt; i++) { |
| struct dc_link *link = NULL; |
| |
| link = dc_get_link_at_index(dm->dc, i); |
| |
| if (link->connector_signal == SIGNAL_TYPE_VIRTUAL) { |
| struct amdgpu_dm_wb_connector *wbcon = kzalloc(sizeof(*wbcon), GFP_KERNEL); |
| |
| if (!wbcon) { |
| DRM_ERROR("KMS: Failed to allocate writeback connector\n"); |
| continue; |
| } |
| |
| if (amdgpu_dm_wb_connector_init(dm, wbcon, i)) { |
| DRM_ERROR("KMS: Failed to initialize writeback connector\n"); |
| kfree(wbcon); |
| continue; |
| } |
| |
| link->psr_settings.psr_feature_enabled = false; |
| link->psr_settings.psr_version = DC_PSR_VERSION_UNSUPPORTED; |
| |
| continue; |
| } |
| |
| aconnector = kzalloc(sizeof(*aconnector), GFP_KERNEL); |
| if (!aconnector) |
| goto fail; |
| |
| aencoder = kzalloc(sizeof(*aencoder), GFP_KERNEL); |
| if (!aencoder) |
| goto fail; |
| |
| if (amdgpu_dm_encoder_init(dm->ddev, aencoder, i)) { |
| DRM_ERROR("KMS: Failed to initialize encoder\n"); |
| goto fail; |
| } |
| |
| if (amdgpu_dm_connector_init(dm, aconnector, i, aencoder)) { |
| DRM_ERROR("KMS: Failed to initialize connector\n"); |
| goto fail; |
| } |
| |
| if (dm->hpd_rx_offload_wq) |
| dm->hpd_rx_offload_wq[aconnector->base.index].aconnector = |
| aconnector; |
| |
| if (!dc_link_detect_connection_type(link, &new_connection_type)) |
| DRM_ERROR("KMS: Failed to detect connector\n"); |
| |
| if (aconnector->base.force && new_connection_type == dc_connection_none) { |
| emulated_link_detect(link); |
| amdgpu_dm_update_connector_after_detect(aconnector); |
| } else { |
| bool ret = false; |
| |
| mutex_lock(&dm->dc_lock); |
| dc_exit_ips_for_hw_access(dm->dc); |
| ret = dc_link_detect(link, DETECT_REASON_BOOT); |
| mutex_unlock(&dm->dc_lock); |
| |
| if (ret) { |
| amdgpu_dm_update_connector_after_detect(aconnector); |
| setup_backlight_device(dm, aconnector); |
| |
| /* Disable PSR if Replay can be enabled */ |
| if (replay_feature_enabled) |
| if (amdgpu_dm_set_replay_caps(link, aconnector)) |
| psr_feature_enabled = false; |
| |
| if (psr_feature_enabled) |
| amdgpu_dm_set_psr_caps(link); |
| |
| /* TODO: Fix vblank control helpers to delay PSR entry to allow this when |
| * PSR is also supported. |
| */ |
| if (link->psr_settings.psr_feature_enabled) |
| adev_to_drm(adev)->vblank_disable_immediate = false; |
| } |
| } |
| amdgpu_set_panel_orientation(&aconnector->base); |
| } |
| |
| /* Software is initialized. Now we can register interrupt handlers. */ |
| switch (adev->asic_type) { |
| #if defined(CONFIG_DRM_AMD_DC_SI) |
| case CHIP_TAHITI: |
| case CHIP_PITCAIRN: |
| case CHIP_VERDE: |
| case CHIP_OLAND: |
| if (dce60_register_irq_handlers(dm->adev)) { |
| DRM_ERROR("DM: Failed to initialize IRQ\n"); |
| goto fail; |
| } |
| break; |
| #endif |
| case CHIP_BONAIRE: |
| case CHIP_HAWAII: |
| case CHIP_KAVERI: |
| case CHIP_KABINI: |
| case CHIP_MULLINS: |
| case CHIP_TONGA: |
| case CHIP_FIJI: |
| case CHIP_CARRIZO: |
| case CHIP_STONEY: |
| case CHIP_POLARIS11: |
| case CHIP_POLARIS10: |
| case CHIP_POLARIS12: |
| case CHIP_VEGAM: |
| case CHIP_VEGA10: |
| case CHIP_VEGA12: |
| case CHIP_VEGA20: |
| if (dce110_register_irq_handlers(dm->adev)) { |
| DRM_ERROR("DM: Failed to initialize IRQ\n"); |
| goto fail; |
| } |
| break; |
| default: |
| switch (amdgpu_ip_version(adev, DCE_HWIP, 0)) { |
| case IP_VERSION(1, 0, 0): |
| case IP_VERSION(1, 0, 1): |
| case IP_VERSION(2, 0, 2): |
| case IP_VERSION(2, 0, 3): |
| case IP_VERSION(2, 0, 0): |
| case IP_VERSION(2, 1, 0): |
| case IP_VERSION(3, 0, 0): |
| case IP_VERSION(3, 0, 2): |
| case IP_VERSION(3, 0, 3): |
| case IP_VERSION(3, 0, 1): |
| case IP_VERSION(3, 1, 2): |
| case IP_VERSION(3, 1, 3): |
| case IP_VERSION(3, 1, 4): |
| case IP_VERSION(3, 1, 5): |
| case IP_VERSION(3, 1, 6): |
| case IP_VERSION(3, 2, 0): |
| case IP_VERSION(3, 2, 1): |
| case IP_VERSION(3, 5, 0): |
| case IP_VERSION(3, 5, 1): |
| case IP_VERSION(4, 0, 1): |
| if (dcn10_register_irq_handlers(dm->adev)) { |
| DRM_ERROR("DM: Failed to initialize IRQ\n"); |
| goto fail; |
| } |
| break; |
| default: |
| DRM_ERROR("Unsupported DCE IP versions: 0x%X\n", |
| amdgpu_ip_version(adev, DCE_HWIP, 0)); |
| goto fail; |
| } |
| break; |
| } |
| |
| return 0; |
| fail: |
| kfree(aencoder); |
| kfree(aconnector); |
| |
| return -EINVAL; |
| } |
| |
| static void amdgpu_dm_destroy_drm_device(struct amdgpu_display_manager *dm) |
| { |
| drm_atomic_private_obj_fini(&dm->atomic_obj); |
| } |
| |
| /****************************************************************************** |
| * amdgpu_display_funcs functions |
| *****************************************************************************/ |
| |
| /* |
| * dm_bandwidth_update - program display watermarks |
| * |
| * @adev: amdgpu_device pointer |
| * |
| * Calculate and program the display watermarks and line buffer allocation. |
| */ |
| static void dm_bandwidth_update(struct amdgpu_device *adev) |
| { |
| /* TODO: implement later */ |
| } |
| |
| static const struct amdgpu_display_funcs dm_display_funcs = { |
| .bandwidth_update = dm_bandwidth_update, /* called unconditionally */ |
| .vblank_get_counter = dm_vblank_get_counter,/* called unconditionally */ |
| .backlight_set_level = NULL, /* never called for DC */ |
| .backlight_get_level = NULL, /* never called for DC */ |
| .hpd_sense = NULL,/* called unconditionally */ |
| .hpd_set_polarity = NULL, /* called unconditionally */ |
| .hpd_get_gpio_reg = NULL, /* VBIOS parsing. DAL does it. */ |
| .page_flip_get_scanoutpos = |
| dm_crtc_get_scanoutpos,/* called unconditionally */ |
| .add_encoder = NULL, /* VBIOS parsing. DAL does it. */ |
| .add_connector = NULL, /* VBIOS parsing. DAL does it. */ |
| }; |
| |
| #if defined(CONFIG_DEBUG_KERNEL_DC) |
| |
| static ssize_t s3_debug_store(struct device *device, |
| struct device_attribute *attr, |
| const char *buf, |
| size_t count) |
| { |
| int ret; |
| int s3_state; |
| struct drm_device *drm_dev = dev_get_drvdata(device); |
| struct amdgpu_device *adev = drm_to_adev(drm_dev); |
| |
| ret = kstrtoint(buf, 0, &s3_state); |
| |
| if (ret == 0) { |
| if (s3_state) { |
| dm_resume(adev); |
| drm_kms_helper_hotplug_event(adev_to_drm(adev)); |
| } else |
| dm_suspend(adev); |
| } |
| |
| return ret == 0 ? count : 0; |
| } |
| |
| DEVICE_ATTR_WO(s3_debug); |
| |
| #endif |
| |
| static int dm_init_microcode(struct amdgpu_device *adev) |
| { |
| char *fw_name_dmub; |
| int r; |
| |
| switch (amdgpu_ip_version(adev, DCE_HWIP, 0)) { |
| case IP_VERSION(2, 1, 0): |
| fw_name_dmub = FIRMWARE_RENOIR_DMUB; |
| if (ASICREV_IS_GREEN_SARDINE(adev->external_rev_id)) |
| fw_name_dmub = FIRMWARE_GREEN_SARDINE_DMUB; |
| break; |
| case IP_VERSION(3, 0, 0): |
| if (amdgpu_ip_version(adev, GC_HWIP, 0) == IP_VERSION(10, 3, 0)) |
| fw_name_dmub = FIRMWARE_SIENNA_CICHLID_DMUB; |
| else |
| fw_name_dmub = FIRMWARE_NAVY_FLOUNDER_DMUB; |
| break; |
| case IP_VERSION(3, 0, 1): |
| fw_name_dmub = FIRMWARE_VANGOGH_DMUB; |
| break; |
| case IP_VERSION(3, 0, 2): |
| fw_name_dmub = FIRMWARE_DIMGREY_CAVEFISH_DMUB; |
| break; |
| case IP_VERSION(3, 0, 3): |
| fw_name_dmub = FIRMWARE_BEIGE_GOBY_DMUB; |
| break; |
| case IP_VERSION(3, 1, 2): |
| case IP_VERSION(3, 1, 3): |
| fw_name_dmub = FIRMWARE_YELLOW_CARP_DMUB; |
| break; |
| case IP_VERSION(3, 1, 4): |
| fw_name_dmub = FIRMWARE_DCN_314_DMUB; |
| break; |
| case IP_VERSION(3, 1, 5): |
| fw_name_dmub = FIRMWARE_DCN_315_DMUB; |
| break; |
| case IP_VERSION(3, 1, 6): |
| fw_name_dmub = FIRMWARE_DCN316_DMUB; |
| break; |
| case IP_VERSION(3, 2, 0): |
| fw_name_dmub = FIRMWARE_DCN_V3_2_0_DMCUB; |
| break; |
| case IP_VERSION(3, 2, 1): |
| fw_name_dmub = FIRMWARE_DCN_V3_2_1_DMCUB; |
| break; |
| case IP_VERSION(3, 5, 0): |
| fw_name_dmub = FIRMWARE_DCN_35_DMUB; |
| break; |
| case IP_VERSION(3, 5, 1): |
| fw_name_dmub = FIRMWARE_DCN_351_DMUB; |
| break; |
| case IP_VERSION(4, 0, 1): |
| fw_name_dmub = FIRMWARE_DCN_401_DMUB; |
| break; |
| default: |
| /* ASIC doesn't support DMUB. */ |
| return 0; |
| } |
| r = amdgpu_ucode_request(adev, &adev->dm.dmub_fw, fw_name_dmub); |
| return r; |
| } |
| |
| static int dm_early_init(void *handle) |
| { |
| struct amdgpu_device *adev = (struct amdgpu_device *)handle; |
| struct amdgpu_mode_info *mode_info = &adev->mode_info; |
| struct atom_context *ctx = mode_info->atom_context; |
| int index = GetIndexIntoMasterTable(DATA, Object_Header); |
| u16 data_offset; |
| |
| /* if there is no object header, skip DM */ |
| if (!amdgpu_atom_parse_data_header(ctx, index, NULL, NULL, NULL, &data_offset)) { |
| adev->harvest_ip_mask |= AMD_HARVEST_IP_DMU_MASK; |
| dev_info(adev->dev, "No object header, skipping DM\n"); |
| return -ENOENT; |
| } |
| |
| switch (adev->asic_type) { |
| #if defined(CONFIG_DRM_AMD_DC_SI) |
| case CHIP_TAHITI: |
| case CHIP_PITCAIRN: |
| case CHIP_VERDE: |
| adev->mode_info.num_crtc = 6; |
| adev->mode_info.num_hpd = 6; |
| adev->mode_info.num_dig = 6; |
| break; |
| case CHIP_OLAND: |
| adev->mode_info.num_crtc = 2; |
| adev->mode_info.num_hpd = 2; |
| adev->mode_info.num_dig = 2; |
| break; |
| #endif |
| case CHIP_BONAIRE: |
| case CHIP_HAWAII: |
| adev->mode_info.num_crtc = 6; |
| adev->mode_info.num_hpd = 6; |
| adev->mode_info.num_dig = 6; |
| break; |
| case CHIP_KAVERI: |
| adev->mode_info.num_crtc = 4; |
| adev->mode_info.num_hpd = 6; |
| adev->mode_info.num_dig = 7; |
| break; |
| case CHIP_KABINI: |
| case CHIP_MULLINS: |
| adev->mode_info.num_crtc = 2; |
| adev->mode_info.num_hpd = 6; |
| adev->mode_info.num_dig = 6; |
| break; |
| case CHIP_FIJI: |
| case CHIP_TONGA: |
| adev->mode_info.num_crtc = 6; |
| adev->mode_info.num_hpd = 6; |
| adev->mode_info.num_dig = 7; |
| break; |
| case CHIP_CARRIZO: |
| adev->mode_info.num_crtc = 3; |
| adev->mode_info.num_hpd = 6; |
| adev->mode_info.num_dig = 9; |
| break; |
| case CHIP_STONEY: |
| adev->mode_info.num_crtc = 2; |
| adev->mode_info.num_hpd = 6; |
| adev->mode_info.num_dig = 9; |
| break; |
| case CHIP_POLARIS11: |
| case CHIP_POLARIS12: |
| adev->mode_info.num_crtc = 5; |
| adev->mode_info.num_hpd = 5; |
| adev->mode_info.num_dig = 5; |
| break; |
| case CHIP_POLARIS10: |
| case CHIP_VEGAM: |
| adev->mode_info.num_crtc = 6; |
| adev->mode_info.num_hpd = 6; |
| adev->mode_info.num_dig = 6; |
| break; |
| case CHIP_VEGA10: |
| case CHIP_VEGA12: |
| case CHIP_VEGA20: |
| adev->mode_info.num_crtc = 6; |
| adev->mode_info.num_hpd = 6; |
| adev->mode_info.num_dig = 6; |
| break; |
| default: |
| |
| switch (amdgpu_ip_version(adev, DCE_HWIP, 0)) { |
| case IP_VERSION(2, 0, 2): |
| case IP_VERSION(3, 0, 0): |
| adev->mode_info.num_crtc = 6; |
| adev->mode_info.num_hpd = 6; |
| adev->mode_info.num_dig = 6; |
| break; |
| case IP_VERSION(2, 0, 0): |
| case IP_VERSION(3, 0, 2): |
| adev->mode_info.num_crtc = 5; |
| adev->mode_info.num_hpd = 5; |
| adev->mode_info.num_dig = 5; |
| break; |
| case IP_VERSION(2, 0, 3): |
| case IP_VERSION(3, 0, 3): |
| adev->mode_info.num_crtc = 2; |
| adev->mode_info.num_hpd = 2; |
| adev->mode_info.num_dig = 2; |
| break; |
| case IP_VERSION(1, 0, 0): |
| case IP_VERSION(1, 0, 1): |
| case IP_VERSION(3, 0, 1): |
| case IP_VERSION(2, 1, 0): |
| case IP_VERSION(3, 1, 2): |
| case IP_VERSION(3, 1, 3): |
| case IP_VERSION(3, 1, 4): |
| case IP_VERSION(3, 1, 5): |
| case IP_VERSION(3, 1, 6): |
| case IP_VERSION(3, 2, 0): |
| case IP_VERSION(3, 2, 1): |
| case IP_VERSION(3, 5, 0): |
| case IP_VERSION(3, 5, 1): |
| case IP_VERSION(4, 0, 1): |
| adev->mode_info.num_crtc = 4; |
| adev->mode_info.num_hpd = 4; |
| adev->mode_info.num_dig = 4; |
| break; |
| default: |
| DRM_ERROR("Unsupported DCE IP versions: 0x%x\n", |
| amdgpu_ip_version(adev, DCE_HWIP, 0)); |
| return -EINVAL; |
| } |
| break; |
| } |
| |
| if (adev->mode_info.funcs == NULL) |
| adev->mode_info.funcs = &dm_display_funcs; |
| |
| /* |
| * Note: Do NOT change adev->audio_endpt_rreg and |
| * adev->audio_endpt_wreg because they are initialised in |
| * amdgpu_device_init() |
| */ |
| #if defined(CONFIG_DEBUG_KERNEL_DC) |
| device_create_file( |
| adev_to_drm(adev)->dev, |
| &dev_attr_s3_debug); |
| #endif |
| adev->dc_enabled = true; |
| |
| return dm_init_microcode(adev); |
| } |
| |
| static bool modereset_required(struct drm_crtc_state *crtc_state) |
| { |
| return !crtc_state->active && drm_atomic_crtc_needs_modeset(crtc_state); |
| } |
| |
| static void amdgpu_dm_encoder_destroy(struct drm_encoder *encoder) |
| { |
| drm_encoder_cleanup(encoder); |
| kfree(encoder); |
| } |
| |
| static const struct drm_encoder_funcs amdgpu_dm_encoder_funcs = { |
| .destroy = amdgpu_dm_encoder_destroy, |
| }; |
| |
| static int |
| fill_plane_color_attributes(const struct drm_plane_state *plane_state, |
| const enum surface_pixel_format format, |
| enum dc_color_space *color_space) |
| { |
| bool full_range; |
| |
| *color_space = COLOR_SPACE_SRGB; |
| |
| /* DRM color properties only affect non-RGB formats. */ |
| if (format < SURFACE_PIXEL_FORMAT_VIDEO_BEGIN) |
| return 0; |
| |
| full_range = (plane_state->color_range == DRM_COLOR_YCBCR_FULL_RANGE); |
| |
| switch (plane_state->color_encoding) { |
| case DRM_COLOR_YCBCR_BT601: |
| if (full_range) |
| *color_space = COLOR_SPACE_YCBCR601; |
| else |
| *color_space = COLOR_SPACE_YCBCR601_LIMITED; |
| break; |
| |
| case DRM_COLOR_YCBCR_BT709: |
| if (full_range) |
| *color_space = COLOR_SPACE_YCBCR709; |
| else |
| *color_space = COLOR_SPACE_YCBCR709_LIMITED; |
| break; |
| |
| case DRM_COLOR_YCBCR_BT2020: |
| if (full_range) |
| *color_space = COLOR_SPACE_2020_YCBCR; |
| else |
| return -EINVAL; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int |
| fill_dc_plane_info_and_addr(struct amdgpu_device *adev, |
| const struct drm_plane_state *plane_state, |
| const u64 tiling_flags, |
| struct dc_plane_info *plane_info, |
| struct dc_plane_address *address, |
| bool tmz_surface, |
| bool force_disable_dcc) |
| { |
| const struct drm_framebuffer *fb = plane_state->fb; |
| const struct amdgpu_framebuffer *afb = |
| to_amdgpu_framebuffer(plane_state->fb); |
| int ret; |
| |
| memset(plane_info, 0, sizeof(*plane_info)); |
| |
| switch (fb->format->format) { |
| case DRM_FORMAT_C8: |
| plane_info->format = |
| SURFACE_PIXEL_FORMAT_GRPH_PALETA_256_COLORS; |
| break; |
| case DRM_FORMAT_RGB565: |
| plane_info->format = SURFACE_PIXEL_FORMAT_GRPH_RGB565; |
| break; |
| case DRM_FORMAT_XRGB8888: |
| case DRM_FORMAT_ARGB8888: |
| plane_info->format = SURFACE_PIXEL_FORMAT_GRPH_ARGB8888; |
| break; |
| case DRM_FORMAT_XRGB2101010: |
| case DRM_FORMAT_ARGB2101010: |
| plane_info->format = SURFACE_PIXEL_FORMAT_GRPH_ARGB2101010; |
| break; |
| case DRM_FORMAT_XBGR2101010: |
| case DRM_FORMAT_ABGR2101010: |
| plane_info->format = SURFACE_PIXEL_FORMAT_GRPH_ABGR2101010; |
| break; |
| case DRM_FORMAT_XBGR8888: |
| case DRM_FORMAT_ABGR8888: |
| plane_info->format = SURFACE_PIXEL_FORMAT_GRPH_ABGR8888; |
| break; |
| case DRM_FORMAT_NV21: |
| plane_info->format = SURFACE_PIXEL_FORMAT_VIDEO_420_YCbCr; |
| break; |
| case DRM_FORMAT_NV12: |
| plane_info->format = SURFACE_PIXEL_FORMAT_VIDEO_420_YCrCb; |
| break; |
| case DRM_FORMAT_P010: |
| plane_info->format = SURFACE_PIXEL_FORMAT_VIDEO_420_10bpc_YCrCb; |
| break; |
| case DRM_FORMAT_XRGB16161616F: |
| case DRM_FORMAT_ARGB16161616F: |
| plane_info->format = SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616F; |
| break; |
| case DRM_FORMAT_XBGR16161616F: |
| case DRM_FORMAT_ABGR16161616F: |
| plane_info->format = SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616F; |
| break; |
| case DRM_FORMAT_XRGB16161616: |
| case DRM_FORMAT_ARGB16161616: |
| plane_info->format = SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616; |
| break; |
| case DRM_FORMAT_XBGR16161616: |
| case DRM_FORMAT_ABGR16161616: |
| plane_info->format = SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616; |
| break; |
| default: |
| DRM_ERROR( |
| "Unsupported screen format %p4cc\n", |
| &fb->format->format); |
| return -EINVAL; |
| } |
| |
| switch (plane_state->rotation & DRM_MODE_ROTATE_MASK) { |
| case DRM_MODE_ROTATE_0: |
| plane_info->rotation = ROTATION_ANGLE_0; |
| break; |
| case DRM_MODE_ROTATE_90: |
| plane_info->rotation = ROTATION_ANGLE_90; |
| break; |
| case DRM_MODE_ROTATE_180: |
| plane_info->rotation = ROTATION_ANGLE_180; |
| break; |
| case DRM_MODE_ROTATE_270: |
| plane_info->rotation = ROTATION_ANGLE_270; |
| break; |
| default: |
| plane_info->rotation = ROTATION_ANGLE_0; |
| break; |
| } |
| |
| |
| plane_info->visible = true; |
| plane_info->stereo_format = PLANE_STEREO_FORMAT_NONE; |
| |
| plane_info->layer_index = plane_state->normalized_zpos; |
| |
| ret = fill_plane_color_attributes(plane_state, plane_info->format, |
| &plane_info->color_space); |
| if (ret) |
| return ret; |
| |
| ret = amdgpu_dm_plane_fill_plane_buffer_attributes(adev, afb, plane_info->format, |
| plane_info->rotation, tiling_flags, |
| &plane_info->tiling_info, |
| &plane_info->plane_size, |
| &plane_info->dcc, address, |
| tmz_surface, force_disable_dcc); |
| if (ret) |
| return ret; |
| |
| amdgpu_dm_plane_fill_blending_from_plane_state( |
| plane_state, &plane_info->per_pixel_alpha, &plane_info->pre_multiplied_alpha, |
| &plane_info->global_alpha, &plane_info->global_alpha_value); |
| |
| return 0; |
| } |
| |
| static int fill_dc_plane_attributes(struct amdgpu_device *adev, |
| struct dc_plane_state *dc_plane_state, |
| struct drm_plane_state *plane_state, |
| struct drm_crtc_state *crtc_state) |
| { |
| struct dm_crtc_state *dm_crtc_state = to_dm_crtc_state(crtc_state); |
| struct amdgpu_framebuffer *afb = (struct amdgpu_framebuffer *)plane_state->fb; |
| struct dc_scaling_info scaling_info; |
| struct dc_plane_info plane_info; |
| int ret; |
| bool force_disable_dcc = false; |
| |
| ret = amdgpu_dm_plane_fill_dc_scaling_info(adev, plane_state, &scaling_info); |
| if (ret) |
| return ret; |
| |
| dc_plane_state->src_rect = scaling_info.src_rect; |
| dc_plane_state->dst_rect = scaling_info.dst_rect; |
| dc_plane_state->clip_rect = scaling_info.clip_rect; |
| dc_plane_state->scaling_quality = scaling_info.scaling_quality; |
| |
| force_disable_dcc = adev->asic_type == CHIP_RAVEN && adev->in_suspend; |
| ret = fill_dc_plane_info_and_addr(adev, plane_state, |
| afb->tiling_flags, |
| &plane_info, |
| &dc_plane_state->address, |
| afb->tmz_surface, |
| force_disable_dcc); |
| if (ret) |
| return ret; |
| |
| dc_plane_state->format = plane_info.format; |
| dc_plane_state->color_space = plane_info.color_space; |
| dc_plane_state->format = plane_info.format; |
| dc_plane_state->plane_size = plane_info.plane_size; |
| dc_plane_state->rotation = plane_info.rotation; |
| dc_plane_state->horizontal_mirror = plane_info.horizontal_mirror; |
| dc_plane_state->stereo_format = plane_info.stereo_format; |
| dc_plane_state->tiling_info = plane_info.tiling_info; |
| dc_plane_state->visible = plane_info.visible; |
| dc_plane_state->per_pixel_alpha = plane_info.per_pixel_alpha; |
| dc_plane_state->pre_multiplied_alpha = plane_info.pre_multiplied_alpha; |
| dc_plane_state->global_alpha = plane_info.global_alpha; |
| dc_plane_state->global_alpha_value = plane_info.global_alpha_value; |
| dc_plane_state->dcc = plane_info.dcc; |
| dc_plane_state->layer_index = plane_info.layer_index; |
| dc_plane_state->flip_int_enabled = true; |
| |
| /* |
| * Always set input transfer function, since plane state is refreshed |
| * every time. |
| */ |
| ret = amdgpu_dm_update_plane_color_mgmt(dm_crtc_state, |
| plane_state, |
| dc_plane_state); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static inline void fill_dc_dirty_rect(struct drm_plane *plane, |
| struct rect *dirty_rect, int32_t x, |
| s32 y, s32 width, s32 height, |
| int *i, bool ffu) |
| { |
| WARN_ON(*i >= DC_MAX_DIRTY_RECTS); |
| |
| dirty_rect->x = x; |
| dirty_rect->y = y; |
| dirty_rect->width = width; |
| dirty_rect->height = height; |
| |
| if (ffu) |
| drm_dbg(plane->dev, |
| "[PLANE:%d] PSR FFU dirty rect size (%d, %d)\n", |
| plane->base.id, width, height); |
| else |
| drm_dbg(plane->dev, |
| "[PLANE:%d] PSR SU dirty rect at (%d, %d) size (%d, %d)", |
| plane->base.id, x, y, width, height); |
| |
| (*i)++; |
| } |
| |
| /** |
| * fill_dc_dirty_rects() - Fill DC dirty regions for PSR selective updates |
| * |
| * @plane: DRM plane containing dirty regions that need to be flushed to the eDP |
| * remote fb |
| * @old_plane_state: Old state of @plane |
| * @new_plane_state: New state of @plane |
| * @crtc_state: New state of CRTC connected to the @plane |
| * @flip_addrs: DC flip tracking struct, which also tracts dirty rects |
| * @is_psr_su: Flag indicating whether Panel Self Refresh Selective Update (PSR SU) is enabled. |
| * If PSR SU is enabled and damage clips are available, only the regions of the screen |
| * that have changed will be updated. If PSR SU is not enabled, |
| * or if damage clips are not available, the entire screen will be updated. |
| * @dirty_regions_changed: dirty regions changed |
| * |
| * For PSR SU, DC informs the DMUB uController of dirty rectangle regions |
| * (referred to as "damage clips" in DRM nomenclature) that require updating on |
| * the eDP remote buffer. The responsibility of specifying the dirty regions is |
| * amdgpu_dm's. |
| * |
| * A damage-aware DRM client should fill the FB_DAMAGE_CLIPS property on the |
| * plane with regions that require flushing to the eDP remote buffer. In |
| * addition, certain use cases - such as cursor and multi-plane overlay (MPO) - |
| * implicitly provide damage clips without any client support via the plane |
| * bounds. |
| */ |
| static void fill_dc_dirty_rects(struct drm_plane *plane, |
| struct drm_plane_state *old_plane_state, |
| struct drm_plane_state *new_plane_state, |
| struct drm_crtc_state *crtc_state, |
| struct dc_flip_addrs *flip_addrs, |
| bool is_psr_su, |
| bool *dirty_regions_changed) |
| { |
| struct dm_crtc_state *dm_crtc_state = to_dm_crtc_state(crtc_state); |
| struct rect *dirty_rects = flip_addrs->dirty_rects; |
| u32 num_clips; |
| struct drm_mode_rect *clips; |
| bool bb_changed; |
| bool fb_changed; |
| u32 i = 0; |
| *dirty_regions_changed = false; |
| |
| /* |
| * Cursor plane has it's own dirty rect update interface. See |
| * dcn10_dmub_update_cursor_data and dmub_cmd_update_cursor_info_data |
| */ |
| if (plane->type == DRM_PLANE_TYPE_CURSOR) |
| return; |
| |
| if (new_plane_state->rotation != DRM_MODE_ROTATE_0) |
| goto ffu; |
| |
| num_clips = drm_plane_get_damage_clips_count(new_plane_state); |
| clips = drm_plane_get_damage_clips(new_plane_state); |
| |
| if (num_clips && (!amdgpu_damage_clips || (amdgpu_damage_clips < 0 && |
| is_psr_su))) |
| goto ffu; |
| |
| if (!dm_crtc_state->mpo_requested) { |
| if (!num_clips || num_clips > DC_MAX_DIRTY_RECTS) |
| goto ffu; |
| |
| for (; flip_addrs->dirty_rect_count < num_clips; clips++) |
| fill_dc_dirty_rect(new_plane_state->plane, |
| &dirty_rects[flip_addrs->dirty_rect_count], |
| clips->x1, clips->y1, |
| clips->x2 - clips->x1, clips->y2 - clips->y1, |
| &flip_addrs->dirty_rect_count, |
| false); |
| return; |
| } |
| |
| /* |
| * MPO is requested. Add entire plane bounding box to dirty rects if |
| * flipped to or damaged. |
| * |
| * If plane is moved or resized, also add old bounding box to dirty |
| * rects. |
| */ |
| fb_changed = old_plane_state->fb->base.id != |
| new_plane_state->fb->base.id; |
| bb_changed = (old_plane_state->crtc_x != new_plane_state->crtc_x || |
| old_plane_state->crtc_y != new_plane_state->crtc_y || |
| old_plane_state->crtc_w != new_plane_state->crtc_w || |
| old_plane_state->crtc_h != new_plane_state->crtc_h); |
| |
| drm_dbg(plane->dev, |
| "[PLANE:%d] PSR bb_changed:%d fb_changed:%d num_clips:%d\n", |
| new_plane_state->plane->base.id, |
| bb_changed, fb_changed, num_clips); |
| |
| *dirty_regions_changed = bb_changed; |
| |
| if ((num_clips + (bb_changed ? 2 : 0)) > DC_MAX_DIRTY_RECTS) |
| goto ffu; |
| |
| if (bb_changed) { |
| fill_dc_dirty_rect(new_plane_state->plane, &dirty_rects[i], |
| new_plane_state->crtc_x, |
| new_plane_state->crtc_y, |
| new_plane_state->crtc_w, |
| new_plane_state->crtc_h, &i, false); |
| |
| /* Add old plane bounding-box if plane is moved or resized */ |
| fill_dc_dirty_rect(new_plane_state->plane, &dirty_rects[i], |
| old_plane_state->crtc_x, |
| old_plane_state->crtc_y, |
| old_plane_state->crtc_w, |
| old_plane_state->crtc_h, &i, false); |
| } |
| |
| if (num_clips) { |
| for (; i < num_clips; clips++) |
| fill_dc_dirty_rect(new_plane_state->plane, |
| &dirty_rects[i], clips->x1, |
| clips->y1, clips->x2 - clips->x1, |
| clips->y2 - clips->y1, &i, false); |
| } else if (fb_changed && !bb_changed) { |
| fill_dc_dirty_rect(new_plane_state->plane, &dirty_rects[i], |
| new_plane_state->crtc_x, |
| new_plane_state->crtc_y, |
| new_plane_state->crtc_w, |
| new_plane_state->crtc_h, &i, false); |
| } |
| |
| flip_addrs->dirty_rect_count = i; |
| return; |
| |
| ffu: |
| fill_dc_dirty_rect(new_plane_state->plane, &dirty_rects[0], 0, 0, |
| dm_crtc_state->base.mode.crtc_hdisplay, |
| dm_crtc_state->base.mode.crtc_vdisplay, |
| &flip_addrs->dirty_rect_count, true); |
| } |
| |
| static void update_stream_scaling_settings(const struct drm_display_mode *mode, |
| const struct dm_connector_state *dm_state, |
| struct dc_stream_state *stream) |
| { |
| enum amdgpu_rmx_type rmx_type; |
| |
| struct rect src = { 0 }; /* viewport in composition space*/ |
| struct rect dst = { 0 }; /* stream addressable area */ |
| |
| /* no mode. nothing to be done */ |
| if (!mode) |
| return; |
| |
| /* Full screen scaling by default */ |
| src.width = mode->hdisplay; |
| src.height = mode->vdisplay; |
| dst.width = stream->timing.h_addressable; |
| dst.height = stream->timing.v_addressable; |
| |
| if (dm_state) { |
| rmx_type = dm_state->scaling; |
| if (rmx_type == RMX_ASPECT || rmx_type == RMX_OFF) { |
| if (src.width * dst.height < |
| src.height * dst.width) { |
| /* height needs less upscaling/more downscaling */ |
| dst.width = src.width * |
| dst.height / src.height; |
| } else { |
| /* width needs less upscaling/more downscaling */ |
| dst.height = src.height * |
| dst.width / src.width; |
| } |
| } else if (rmx_type == RMX_CENTER) { |
| dst = src; |
| } |
| |
| dst.x = (stream->timing.h_addressable - dst.width) / 2; |
| dst.y = (stream->timing.v_addressable - dst.height) / 2; |
| |
| if (dm_state->underscan_enable) { |
| dst.x += dm_state->underscan_hborder / 2; |
| dst.y += dm_state->underscan_vborder / 2; |
| dst.width -= dm_state->underscan_hborder; |
| dst.height -= dm_state->underscan_vborder; |
| } |
| } |
| |
| stream->src = src; |
| stream->dst = dst; |
| |
| DRM_DEBUG_KMS("Destination Rectangle x:%d y:%d width:%d height:%d\n", |
| dst.x, dst.y, dst.width, dst.height); |
| |
| } |
| |
| static enum dc_color_depth |
| convert_color_depth_from_display_info(const struct drm_connector *connector, |
| bool is_y420, int requested_bpc) |
| { |
| u8 bpc; |
| |
| if (is_y420) { |
| bpc = 8; |
| |
| /* Cap display bpc based on HDMI 2.0 HF-VSDB */ |
| if (connector->display_info.hdmi.y420_dc_modes & DRM_EDID_YCBCR420_DC_48) |
| bpc = 16; |
| else if (connector->display_info.hdmi.y420_dc_modes & DRM_EDID_YCBCR420_DC_36) |
| bpc = 12; |
| else if (connector->display_info.hdmi.y420_dc_modes & DRM_EDID_YCBCR420_DC_30) |
| bpc = 10; |
| } else { |
| bpc = (uint8_t)connector->display_info.bpc; |
| /* Assume 8 bpc by default if no bpc is specified. */ |
| bpc = bpc ? bpc : 8; |
| } |
| |
| if (requested_bpc > 0) { |
| /* |
| * Cap display bpc based on the user requested value. |
| * |
| * The value for state->max_bpc may not correctly updated |
| * depending on when the connector gets added to the state |
| * or if this was called outside of atomic check, so it |
| * can't be used directly. |
| */ |
| bpc = min_t(u8, bpc, requested_bpc); |
| |
| /* Round down to the nearest even number. */ |
| bpc = bpc - (bpc & 1); |
| } |
| |
| switch (bpc) { |
| case 0: |
| /* |
| * Temporary Work around, DRM doesn't parse color depth for |
| * EDID revision before 1.4 |
| * TODO: Fix edid parsing |
| */ |
| return COLOR_DEPTH_888; |
| case 6: |
| return COLOR_DEPTH_666; |
| case 8: |
| return COLOR_DEPTH_888; |
| case 10: |
| return COLOR_DEPTH_101010; |
| case 12: |
| return COLOR_DEPTH_121212; |
| case 14: |
| return COLOR_DEPTH_141414; |
| case 16: |
| return COLOR_DEPTH_161616; |
| default: |
| return COLOR_DEPTH_UNDEFINED; |
| } |
| } |
| |
| static enum dc_aspect_ratio |
| get_aspect_ratio(const struct drm_display_mode *mode_in) |
| { |
| /* 1-1 mapping, since both enums follow the HDMI spec. */ |
| return (enum dc_aspect_ratio) mode_in->picture_aspect_ratio; |
| } |
| |
| static enum dc_color_space |
| get_output_color_space(const struct dc_crtc_timing *dc_crtc_timing, |
| const struct drm_connector_state *connector_state) |
| { |
| enum dc_color_space color_space = COLOR_SPACE_SRGB; |
| |
| switch (connector_state->colorspace) { |
| case DRM_MODE_COLORIMETRY_BT601_YCC: |
| if (dc_crtc_timing->flags.Y_ONLY) |
| color_space = COLOR_SPACE_YCBCR601_LIMITED; |
| else |
| color_space = COLOR_SPACE_YCBCR601; |
| break; |
| case DRM_MODE_COLORIMETRY_BT709_YCC: |
| if (dc_crtc_timing->flags.Y_ONLY) |
| color_space = COLOR_SPACE_YCBCR709_LIMITED; |
| else |
| color_space = COLOR_SPACE_YCBCR709; |
| break; |
| case DRM_MODE_COLORIMETRY_OPRGB: |
| color_space = COLOR_SPACE_ADOBERGB; |
| break; |
| case DRM_MODE_COLORIMETRY_BT2020_RGB: |
| case DRM_MODE_COLORIMETRY_BT2020_YCC: |
| if (dc_crtc_timing->pixel_encoding == PIXEL_ENCODING_RGB) |
| color_space = COLOR_SPACE_2020_RGB_FULLRANGE; |
| else |
| color_space = COLOR_SPACE_2020_YCBCR; |
| break; |
| case DRM_MODE_COLORIMETRY_DEFAULT: // ITU601 |
| default: |
| if (dc_crtc_timing->pixel_encoding == PIXEL_ENCODING_RGB) { |
| color_space = COLOR_SPACE_SRGB; |
| /* |
| * 27030khz is the separation point between HDTV and SDTV |
| * according to HDMI spec, we use YCbCr709 and YCbCr601 |
| * respectively |
| */ |
| } else if (dc_crtc_timing->pix_clk_100hz > 270300) { |
| if (dc_crtc_timing->flags.Y_ONLY) |
| color_space = |
| COLOR_SPACE_YCBCR709_LIMITED; |
| else |
| color_space = COLOR_SPACE_YCBCR709; |
| } else { |
| if (dc_crtc_timing->flags.Y_ONLY) |
| color_space = |
| COLOR_SPACE_YCBCR601_LIMITED; |
| else |
| color_space = COLOR_SPACE_YCBCR601; |
| } |
| break; |
| } |
| |
| return color_space; |
| } |
| |
| static enum display_content_type |
| get_output_content_type(const struct drm_connector_state *connector_state) |
| { |
| switch (connector_state->content_type) { |
| default: |
| case DRM_MODE_CONTENT_TYPE_NO_DATA: |
| return DISPLAY_CONTENT_TYPE_NO_DATA; |
| case DRM_MODE_CONTENT_TYPE_GRAPHICS: |
| return DISPLAY_CONTENT_TYPE_GRAPHICS; |
| case DRM_MODE_CONTENT_TYPE_PHOTO: |
| return DISPLAY_CONTENT_TYPE_PHOTO; |
| case DRM_MODE_CONTENT_TYPE_CINEMA: |
| return DISPLAY_CONTENT_TYPE_CINEMA; |
| case DRM_MODE_CONTENT_TYPE_GAME: |
| return DISPLAY_CONTENT_TYPE_GAME; |
| } |
| } |
| |
| static bool adjust_colour_depth_from_display_info( |
| struct dc_crtc_timing *timing_out, |
| const struct drm_display_info *info) |
| { |
| enum dc_color_depth depth = timing_out->display_color_depth; |
| int normalized_clk; |
| |
| do { |
| normalized_clk = timing_out->pix_clk_100hz / 10; |
| /* YCbCr 4:2:0 requires additional adjustment of 1/2 */ |
| if (timing_out->pixel_encoding == PIXEL_ENCODING_YCBCR420) |
| normalized_clk /= 2; |
| /* Adjusting pix clock following on HDMI spec based on colour depth */ |
| switch (depth) { |
| case COLOR_DEPTH_888: |
| break; |
| case COLOR_DEPTH_101010: |
| normalized_clk = (normalized_clk * 30) / 24; |
| break; |
| case COLOR_DEPTH_121212: |
| normalized_clk = (normalized_clk * 36) / 24; |
| break; |
| case COLOR_DEPTH_161616: |
| normalized_clk = (normalized_clk * 48) / 24; |
| break; |
| default: |
| /* The above depths are the only ones valid for HDMI. */ |
| return false; |
| } |
| if (normalized_clk <= info->max_tmds_clock) { |
| timing_out->display_color_depth = depth; |
| return true; |
| } |
| } while (--depth > COLOR_DEPTH_666); |
| return false; |
| } |
| |
| static void fill_stream_properties_from_drm_display_mode( |
| struct dc_stream_state *stream, |
| const struct drm_display_mode *mode_in, |
| const struct drm_connector *connector, |
| const struct drm_connector_state *connector_state, |
| const struct dc_stream_state *old_stream, |
| int requested_bpc) |
| { |
| struct dc_crtc_timing *timing_out = &stream->timing; |
| const struct drm_display_info *info = &connector->display_info; |
| struct amdgpu_dm_connector *aconnector = NULL; |
| struct hdmi_vendor_infoframe hv_frame; |
| struct hdmi_avi_infoframe avi_frame; |
| |
| if (connector->connector_type != DRM_MODE_CONNECTOR_WRITEBACK) |
| aconnector = to_amdgpu_dm_connector(connector); |
| |
| memset(&hv_frame, 0, sizeof(hv_frame)); |
| memset(&avi_frame, 0, sizeof(avi_frame)); |
| |
| timing_out->h_border_left = 0; |
| timing_out->h_border_right = 0; |
| timing_out->v_border_top = 0; |
| timing_out->v_border_bottom = 0; |
| /* TODO: un-hardcode */ |
| if (drm_mode_is_420_only(info, mode_in) |
| && stream->signal == SIGNAL_TYPE_HDMI_TYPE_A) |
| timing_out->pixel_encoding = PIXEL_ENCODING_YCBCR420; |
| else if (drm_mode_is_420_also(info, mode_in) |
| && aconnector |
| && aconnector->force_yuv420_output) |
| timing_out->pixel_encoding = PIXEL_ENCODING_YCBCR420; |
| else if ((connector->display_info.color_formats & DRM_COLOR_FORMAT_YCBCR444) |
| && stream->signal == SIGNAL_TYPE_HDMI_TYPE_A) |
| timing_out->pixel_encoding = PIXEL_ENCODING_YCBCR444; |
| else |
| timing_out->pixel_encoding = PIXEL_ENCODING_RGB; |
| |
| timing_out->timing_3d_format = TIMING_3D_FORMAT_NONE; |
| timing_out->display_color_depth = convert_color_depth_from_display_info( |
| connector, |
| (timing_out->pixel_encoding == PIXEL_ENCODING_YCBCR420), |
| requested_bpc); |
| timing_out->scan_type = SCANNING_TYPE_NODATA; |
| timing_out->hdmi_vic = 0; |
| |
| if (old_stream) { |
| timing_out->vic = old_stream->timing.vic; |
| timing_out->flags.HSYNC_POSITIVE_POLARITY = old_stream->timing.flags.HSYNC_POSITIVE_POLARITY; |
| timing_out->flags.VSYNC_POSITIVE_POLARITY = old_stream->timing.flags.VSYNC_POSITIVE_POLARITY; |
| } else { |
| timing_out->vic = drm_match_cea_mode(mode_in); |
| if (mode_in->flags & DRM_MODE_FLAG_PHSYNC) |
| timing_out->flags.HSYNC_POSITIVE_POLARITY = 1; |
| if (mode_in->flags & DRM_MODE_FLAG_PVSYNC) |
| timing_out->flags.VSYNC_POSITIVE_POLARITY = 1; |
| } |
| |
| if (stream->signal == SIGNAL_TYPE_HDMI_TYPE_A) { |
| drm_hdmi_avi_infoframe_from_display_mode(&avi_frame, (struct drm_connector *)connector, mode_in); |
| timing_out->vic = avi_frame.video_code; |
| drm_hdmi_vendor_infoframe_from_display_mode(&hv_frame, (struct drm_connector *)connector, mode_in); |
| timing_out->hdmi_vic = hv_frame.vic; |
| } |
| |
| if (aconnector && is_freesync_video_mode(mode_in, aconnector)) { |
| timing_out->h_addressable = mode_in->hdisplay; |
| timing_out->h_total = mode_in->htotal; |
| timing_out->h_sync_width = mode_in->hsync_end - mode_in->hsync_start; |
| timing_out->h_front_porch = mode_in->hsync_start - mode_in->hdisplay; |
| timing_out->v_total = mode_in->vtotal; |
| timing_out->v_addressable = mode_in->vdisplay; |
| timing_out->v_front_porch = mode_in->vsync_start - mode_in->vdisplay; |
| timing_out->v_sync_width = mode_in->vsync_end - mode_in->vsync_start; |
| timing_out->pix_clk_100hz = mode_in->clock * 10; |
| } else { |
| timing_out->h_addressable = mode_in->crtc_hdisplay; |
| timing_out->h_total = mode_in->crtc_htotal; |
| timing_out->h_sync_width = mode_in->crtc_hsync_end - mode_in->crtc_hsync_start; |
| timing_out->h_front_porch = mode_in->crtc_hsync_start - mode_in->crtc_hdisplay; |
| timing_out->v_total = mode_in->crtc_vtotal; |
| timing_out->v_addressable = mode_in->crtc_vdisplay; |
| timing_out->v_front_porch = mode_in->crtc_vsync_start - mode_in->crtc_vdisplay; |
| timing_out->v_sync_width = mode_in->crtc_vsync_end - mode_in->crtc_vsync_start; |
| timing_out->pix_clk_100hz = mode_in->crtc_clock * 10; |
| } |
| |
| timing_out->aspect_ratio = get_aspect_ratio(mode_in); |
| |
| stream->out_transfer_func.type = TF_TYPE_PREDEFINED; |
| stream->out_transfer_func.tf = TRANSFER_FUNCTION_SRGB; |
| if (stream->signal == SIGNAL_TYPE_HDMI_TYPE_A) { |
| if (!adjust_colour_depth_from_display_info(timing_out, info) && |
| drm_mode_is_420_also(info, mode_in) && |
| timing_out->pixel_encoding != PIXEL_ENCODING_YCBCR420) { |
| timing_out->pixel_encoding = PIXEL_ENCODING_YCBCR420; |
| adjust_colour_depth_from_display_info(timing_out, info); |
| } |
| } |
| |
| stream->output_color_space = get_output_color_space(timing_out, connector_state); |
| stream->content_type = get_output_content_type(connector_state); |
| } |
| |
| static void fill_audio_info(struct audio_info *audio_info, |
| const struct drm_connector *drm_connector, |
| const struct dc_sink *dc_sink) |
| { |
| int i = 0; |
| int cea_revision = 0; |
| const struct dc_edid_caps *edid_caps = &dc_sink->edid_caps; |
| |
| audio_info->manufacture_id = edid_caps->manufacturer_id; |
| audio_info->product_id = edid_caps->product_id; |
| |
| cea_revision = drm_connector->display_info.cea_rev; |
| |
| strscpy(audio_info->display_name, |
| edid_caps->display_name, |
| AUDIO_INFO_DISPLAY_NAME_SIZE_IN_CHARS); |
| |
| if (cea_revision >= 3) { |
| audio_info->mode_count = edid_caps->audio_mode_count; |
| |
| for (i = 0; i < audio_info->mode_count; ++i) { |
| audio_info->modes[i].format_code = |
| (enum audio_format_code) |
| (edid_caps->audio_modes[i].format_code); |
| audio_info->modes[i].channel_count = |
| edid_caps->audio_modes[i].channel_count; |
| audio_info->modes[i].sample_rates.all = |
| edid_caps->audio_modes[i].sample_rate; |
| audio_info->modes[i].sample_size = |
| edid_caps->audio_modes[i].sample_size; |
| } |
| } |
| |
| audio_info->flags.all = edid_caps->speaker_flags; |
| |
| /* TODO: We only check for the progressive mode, check for interlace mode too */ |
| if (drm_connector->latency_present[0]) { |
| audio_info->video_latency = drm_connector->video_latency[0]; |
| audio_info->audio_latency = drm_connector->audio_latency[0]; |
| } |
| |
| /* TODO: For DP, video and audio latency should be calculated from DPCD caps */ |
| |
| } |
| |
| static void |
| copy_crtc_timing_for_drm_display_mode(const struct drm_display_mode *src_mode, |
| struct drm_display_mode *dst_mode) |
| { |
| dst_mode->crtc_hdisplay = src_mode->crtc_hdisplay; |
| dst_mode->crtc_vdisplay = src_mode->crtc_vdisplay; |
| dst_mode->crtc_clock = src_mode->crtc_clock; |
| dst_mode->crtc_hblank_start = src_mode->crtc_hblank_start; |
| dst_mode->crtc_hblank_end = src_mode->crtc_hblank_end; |
| dst_mode->crtc_hsync_start = src_mode->crtc_hsync_start; |
| dst_mode->crtc_hsync_end = src_mode->crtc_hsync_end; |
| dst_mode->crtc_htotal = src_mode->crtc_htotal; |
| dst_mode->crtc_hskew = src_mode->crtc_hskew; |
| dst_mode->crtc_vblank_start = src_mode->crtc_vblank_start; |
| dst_mode->crtc_vblank_end = src_mode->crtc_vblank_end; |
| dst_mode->crtc_vsync_start = src_mode->crtc_vsync_start; |
| dst_mode->crtc_vsync_end = src_mode->crtc_vsync_end; |
| dst_mode->crtc_vtotal = src_mode->crtc_vtotal; |
| } |
| |
| static void |
| decide_crtc_timing_for_drm_display_mode(struct drm_display_mode *drm_mode, |
| const struct drm_display_mode *native_mode, |
| bool scale_enabled) |
| { |
| if (scale_enabled) { |
| copy_crtc_timing_for_drm_display_mode(native_mode, drm_mode); |
| } else if (native_mode->clock == drm_mode->clock && |
| native_mode->htotal == drm_mode->htotal && |
| native_mode->vtotal == drm_mode->vtotal) { |
| copy_crtc_timing_for_drm_display_mode(native_mode, drm_mode); |
| } else { |
| /* no scaling nor amdgpu inserted, no need to patch */ |
| } |
| } |
| |
| static struct dc_sink * |
| create_fake_sink(struct dc_link *link) |
| { |
| struct dc_sink_init_data sink_init_data = { 0 }; |
| struct dc_sink *sink = NULL; |
| |
| sink_init_data.link = link; |
| sink_init_data.sink_signal = link->connector_signal; |
| |
| sink = dc_sink_create(&sink_init_data); |
| if (!sink) { |
| DRM_ERROR("Failed to create sink!\n"); |
| return NULL; |
| } |
| sink->sink_signal = SIGNAL_TYPE_VIRTUAL; |
| |
| return sink; |
| } |
| |
| static void set_multisync_trigger_params( |
| struct dc_stream_state *stream) |
| { |
| struct dc_stream_state *master = NULL; |
| |
| if (stream->triggered_crtc_reset.enabled) { |
| master = stream->triggered_crtc_reset.event_source; |
| stream->triggered_crtc_reset.event = |
| master->timing.flags.VSYNC_POSITIVE_POLARITY ? |
| CRTC_EVENT_VSYNC_RISING : CRTC_EVENT_VSYNC_FALLING; |
| stream->triggered_crtc_reset.delay = TRIGGER_DELAY_NEXT_PIXEL; |
| } |
| } |
| |
| static void set_master_stream(struct dc_stream_state *stream_set[], |
| int stream_count) |
| { |
| int j, highest_rfr = 0, master_stream = 0; |
| |
| for (j = 0; j < stream_count; j++) { |
| if (stream_set[j] && stream_set[j]->triggered_crtc_reset.enabled) { |
| int refresh_rate = 0; |
| |
| refresh_rate = (stream_set[j]->timing.pix_clk_100hz*100)/ |
| (stream_set[j]->timing.h_total*stream_set[j]->timing.v_total); |
| if (refresh_rate > highest_rfr) { |
| highest_rfr = refresh_rate; |
| master_stream = j; |
| } |
| } |
| } |
| for (j = 0; j < stream_count; j++) { |
| if (stream_set[j]) |
| stream_set[j]->triggered_crtc_reset.event_source = stream_set[master_stream]; |
| } |
| } |
| |
| static void dm_enable_per_frame_crtc_master_sync(struct dc_state *context) |
| { |
| int i = 0; |
| struct dc_stream_state *stream; |
| |
| if (context->stream_count < 2) |
| return; |
| for (i = 0; i < context->stream_count ; i++) { |
| if (!context->streams[i]) |
| continue; |
| /* |
| * TODO: add a function to read AMD VSDB bits and set |
| * crtc_sync_master.multi_sync_enabled flag |
| * For now it's set to false |
| */ |
| } |
| |
| set_master_stream(context->streams, context->stream_count); |
| |
| for (i = 0; i < context->stream_count ; i++) { |
| stream = context->streams[i]; |
| |
| if (!stream) |
| continue; |
| |
| set_multisync_trigger_params(stream); |
| } |
| } |
| |
| /** |
| * DOC: FreeSync Video |
| * |
| * When a userspace application wants to play a video, the content follows a |
| * standard format definition that usually specifies the FPS for that format. |
| * The below list illustrates some video format and the expected FPS, |
| * respectively: |
| * |
| * - TV/NTSC (23.976 FPS) |
| * - Cinema (24 FPS) |
| * - TV/PAL (25 FPS) |
| * - TV/NTSC (29.97 FPS) |
| * - TV/NTSC (30 FPS) |
| * - Cinema HFR (48 FPS) |
| * - TV/PAL (50 FPS) |
| * - Commonly used (60 FPS) |
| * - Multiples of 24 (48,72,96 FPS) |
| * |
| * The list of standards video format is not huge and can be added to the |
| * connector modeset list beforehand. With that, userspace can leverage |
| * FreeSync to extends the front porch in order to attain the target refresh |
| * rate. Such a switch will happen seamlessly, without screen blanking or |
| * reprogramming of the output in any other way. If the userspace requests a |
| * modesetting change compatible with FreeSync modes that only differ in the |
| * refresh rate, DC will skip the full update and avoid blink during the |
| * transition. For example, the video player can change the modesetting from |
| * 60Hz to 30Hz for playing TV/NTSC content when it goes full screen without |
| * causing any display blink. This same concept can be applied to a mode |
| * setting change. |
| */ |
| static struct drm_display_mode * |
| get_highest_refresh_rate_mode(struct amdgpu_dm_connector *aconnector, |
| bool use_probed_modes) |
| { |
| struct drm_display_mode *m, *m_pref = NULL; |
| u16 current_refresh, highest_refresh; |
| struct list_head *list_head = use_probed_modes ? |
| &aconnector->base.probed_modes : |
| &aconnector->base.modes; |
| |
| if (aconnector->base.connector_type == DRM_MODE_CONNECTOR_WRITEBACK) |
| return NULL; |
| |
| if (aconnector->freesync_vid_base.clock != 0) |
| return &aconnector->freesync_vid_base; |
| |
| /* Find the preferred mode */ |
| list_for_each_entry(m, list_head, head) { |
| if (m->type & DRM_MODE_TYPE_PREFERRED) { |
| m_pref = m; |
| break; |
| } |
| } |
| |
| if (!m_pref) { |
| /* Probably an EDID with no preferred mode. Fallback to first entry */ |
| m_pref = list_first_entry_or_null( |
| &aconnector->base.modes, struct drm_display_mode, head); |
| if (!m_pref) { |
| DRM_DEBUG_DRIVER("No preferred mode found in EDID\n"); |
| return NULL; |
| } |
| } |
| |
| highest_refresh = drm_mode_vrefresh(m_pref); |
| |
| /* |
| * Find the mode with highest refresh rate with same resolution. |
| * For some monitors, preferred mode is not the mode with highest |
| * supported refresh rate. |
| */ |
| list_for_each_entry(m, list_head, head) { |
| current_refresh = drm_mode_vrefresh(m); |
| |
| if (m->hdisplay == m_pref->hdisplay && |
| m->vdisplay == m_pref->vdisplay && |
| highest_refresh < current_refresh) { |
| highest_refresh = current_refresh; |
| m_pref = m; |
| } |
| } |
| |
| drm_mode_copy(&aconnector->freesync_vid_base, m_pref); |
| return m_pref; |
| } |
| |
| static bool is_freesync_video_mode(const struct drm_display_mode *mode, |
| struct amdgpu_dm_connector *aconnector) |
| { |
| struct drm_display_mode *high_mode; |
| int timing_diff; |
| |
| high_mode = get_highest_refresh_rate_mode(aconnector, false); |
| if (!high_mode || !mode) |
| return false; |
| |
| timing_diff = high_mode->vtotal - mode->vtotal; |
| |
| if (high_mode->clock == 0 || high_mode->clock != mode->clock || |
| high_mode->hdisplay != mode->hdisplay || |
| high_mode->vdisplay != mode->vdisplay || |
| high_mode->hsync_start != mode->hsync_start || |
| high_mode->hsync_end != mode->hsync_end || |
| high_mode->htotal != mode->htotal || |
| high_mode->hskew != mode->hskew || |
| high_mode->vscan != mode->vscan || |
| high_mode->vsync_start - mode->vsync_start != timing_diff || |
| high_mode->vsync_end - mode->vsync_end != timing_diff) |
| return false; |
| else |
| return true; |
| } |
| |
| #if defined(CONFIG_DRM_AMD_DC_FP) |
| static void update_dsc_caps(struct amdgpu_dm_connector *aconnector, |
| struct dc_sink *sink, struct dc_stream_state *stream, |
| struct dsc_dec_dpcd_caps *dsc_caps) |
| { |
| stream->timing.flags.DSC = 0; |
| dsc_caps->is_dsc_supported = false; |
| |
| if (aconnector->dc_link && (sink->sink_signal == SIGNAL_TYPE_DISPLAY_PORT || |
| sink->sink_signal == SIGNAL_TYPE_EDP)) { |
| if (sink->link->dpcd_caps.dongle_type == DISPLAY_DONGLE_NONE || |
| sink->link->dpcd_caps.dongle_type == DISPLAY_DONGLE_DP_HDMI_CONVERTER) |
| dc_dsc_parse_dsc_dpcd(aconnector->dc_link->ctx->dc, |
| aconnector->dc_link->dpcd_caps.dsc_caps.dsc_basic_caps.raw, |
| aconnector->dc_link->dpcd_caps.dsc_caps.dsc_branch_decoder_caps.raw, |
| dsc_caps); |
| } |
| } |
| |
| static void apply_dsc_policy_for_edp(struct amdgpu_dm_connector *aconnector, |
| struct dc_sink *sink, struct dc_stream_state *stream, |
| struct dsc_dec_dpcd_caps *dsc_caps, |
| uint32_t max_dsc_target_bpp_limit_override) |
| { |
| const struct dc_link_settings *verified_link_cap = NULL; |
| u32 link_bw_in_kbps; |
| u32 edp_min_bpp_x16, edp_max_bpp_x16; |
| struct dc *dc = sink->ctx->dc; |
| struct dc_dsc_bw_range bw_range = {0}; |
| struct dc_dsc_config dsc_cfg = {0}; |
| struct dc_dsc_config_options dsc_options = {0}; |
| |
| dc_dsc_get_default_config_option(dc, &dsc_options); |
| dsc_options.max_target_bpp_limit_override_x16 = max_dsc_target_bpp_limit_override * 16; |
| |
| verified_link_cap = dc_link_get_link_cap(stream->link); |
| link_bw_in_kbps = dc_link_bandwidth_kbps(stream->link, verified_link_cap); |
| edp_min_bpp_x16 = 8 * 16; |
| edp_max_bpp_x16 = 8 * 16; |
| |
| if (edp_max_bpp_x16 > dsc_caps->edp_max_bits_per_pixel) |
| edp_max_bpp_x16 = dsc_caps->edp_max_bits_per_pixel; |
| |
| if (edp_max_bpp_x16 < edp_min_bpp_x16) |
| edp_min_bpp_x16 = edp_max_bpp_x16; |
| |
| if (dc_dsc_compute_bandwidth_range(dc->res_pool->dscs[0], |
| dc->debug.dsc_min_slice_height_override, |
| edp_min_bpp_x16, edp_max_bpp_x16, |
| dsc_caps, |
| &stream->timing, |
| dc_link_get_highest_encoding_format(aconnector->dc_link), |
| &bw_range)) { |
| |
| if (bw_range.max_kbps < link_bw_in_kbps) { |
| if (dc_dsc_compute_config(dc->res_pool->dscs[0], |
| dsc_caps, |
| &dsc_options, |
| 0, |
| &stream->timing, |
| dc_link_get_highest_encoding_format(aconnector->dc_link), |
| &dsc_cfg)) { |
| stream->timing.dsc_cfg = dsc_cfg; |
| stream->timing.flags.DSC = 1; |
| stream->timing.dsc_cfg.bits_per_pixel = edp_max_bpp_x16; |
| } |
| return; |
| } |
| } |
| |
| if (dc_dsc_compute_config(dc->res_pool->dscs[0], |
| dsc_caps, |
| &dsc_options, |
| link_bw_in_kbps, |
| &stream->timing, |
| dc_link_get_highest_encoding_format(aconnector->dc_link), |
| &dsc_cfg)) { |
| stream->timing.dsc_cfg = dsc_cfg; |
| stream->timing.flags.DSC = 1; |
| } |
| } |
| |
| static void apply_dsc_policy_for_stream(struct amdgpu_dm_connector *aconnector, |
| struct dc_sink *sink, struct dc_stream_state *stream, |
| struct dsc_dec_dpcd_caps *dsc_caps) |
| { |
| struct drm_connector *drm_connector = &aconnector->base; |
| u32 link_bandwidth_kbps; |
| struct dc *dc = sink->ctx->dc; |
| u32 max_supported_bw_in_kbps, timing_bw_in_kbps; |
| u32 dsc_max_supported_bw_in_kbps; |
| u32 max_dsc_target_bpp_limit_override = |
| drm_connector->display_info.max_dsc_bpp; |
| struct dc_dsc_config_options dsc_options = {0}; |
| |
| dc_dsc_get_default_config_option(dc, &dsc_options); |
| dsc_options.max_target_bpp_limit_override_x16 = max_dsc_target_bpp_limit_override * 16; |
| |
| link_bandwidth_kbps = dc_link_bandwidth_kbps(aconnector->dc_link, |
| dc_link_get_link_cap(aconnector->dc_link)); |
| |
| /* Set DSC policy according to dsc_clock_en */ |
| dc_dsc_policy_set_enable_dsc_when_not_needed( |
| aconnector->dsc_settings.dsc_force_enable == DSC_CLK_FORCE_ENABLE); |
| |
| if (sink->sink_signal == SIGNAL_TYPE_EDP && |
| !aconnector->dc_link->panel_config.dsc.disable_dsc_edp && |
| dc->caps.edp_dsc_support && aconnector->dsc_settings.dsc_force_enable != DSC_CLK_FORCE_DISABLE) { |
| |
| apply_dsc_policy_for_edp(aconnector, sink, stream, dsc_caps, max_dsc_target_bpp_limit_override); |
| |
| } else if (sink->sink_signal == SIGNAL_TYPE_DISPLAY_PORT) { |
| if (sink->link->dpcd_caps.dongle_type == DISPLAY_DONGLE_NONE) { |
| if (dc_dsc_compute_config(aconnector->dc_link->ctx->dc->res_pool->dscs[0], |
| dsc_caps, |
| &dsc_options, |
| link_bandwidth_kbps, |
| &stream->timing, |
| dc_link_get_highest_encoding_format(aconnector->dc_link), |
| &stream->timing.dsc_cfg)) { |
| stream->timing.flags.DSC = 1; |
| DRM_DEBUG_DRIVER("%s: [%s] DSC is selected from SST RX\n", __func__, drm_connector->name); |
| } |
| } else if (sink->link->dpcd_caps.dongle_type == DISPLAY_DONGLE_DP_HDMI_CONVERTER) { |
| timing_bw_in_kbps = dc_bandwidth_in_kbps_from_timing(&stream->timing, |
| dc_link_get_highest_encoding_format(aconnector->dc_link)); |
| max_supported_bw_in_kbps = link_bandwidth_kbps; |
| dsc_max_supported_bw_in_kbps = link_bandwidth_kbps; |
| |
| if (timing_bw_in_kbps > max_supported_bw_in_kbps && |
| max_supported_bw_in_kbps > 0 && |
| dsc_max_supported_bw_in_kbps > 0) |
| if (dc_dsc_compute_config(aconnector->dc_link->ctx->dc->res_pool->dscs[0], |
| dsc_caps, |
| &dsc_options, |
| dsc_max_supported_bw_in_kbps, |
| &stream->timing, |
| dc_link_get_highest_encoding_format(aconnector->dc_link), |
| &stream->timing.dsc_cfg)) { |
| stream->timing.flags.DSC = 1; |
| DRM_DEBUG_DRIVER("%s: [%s] DSC is selected from DP-HDMI PCON\n", |
| __func__, drm_connector->name); |
| } |
| } |
| } |
| |
| /* Overwrite the stream flag if DSC is enabled through debugfs */ |
| if (aconnector->dsc_settings.dsc_force_enable == DSC_CLK_FORCE_ENABLE) |
| stream->timing.flags.DSC = 1; |
| |
| if (stream->timing.flags.DSC && aconnector->dsc_settings.dsc_num_slices_h) |
| stream->timing.dsc_cfg.num_slices_h = aconnector->dsc_settings.dsc_num_slices_h; |
| |
| if (stream->timing.flags.DSC && aconnector->dsc_settings.dsc_num_slices_v) |
| stream->timing.dsc_cfg.num_slices_v = aconnector->dsc_settings.dsc_num_slices_v; |
| |
| if (stream->timing.flags.DSC && aconnector->dsc_settings.dsc_bits_per_pixel) |
| stream->timing.dsc_cfg.bits_per_pixel = aconnector->dsc_settings.dsc_bits_per_pixel; |
| } |
| #endif |
| |
| static struct dc_stream_state * |
| create_stream_for_sink(struct drm_connector *connector, |
| const struct drm_display_mode *drm_mode, |
| const struct dm_connector_state *dm_state, |
| const struct dc_stream_state *old_stream, |
| int requested_bpc) |
| { |
| struct amdgpu_dm_connector *aconnector = NULL; |
| struct drm_display_mode *preferred_mode = NULL; |
| const struct drm_connector_state *con_state = &dm_state->base; |
| struct dc_stream_state *stream = NULL; |
| struct drm_display_mode mode; |
| struct drm_display_mode saved_mode; |
| struct drm_display_mode *freesync_mode = NULL; |
| bool native_mode_found = false; |
| bool recalculate_timing = false; |
| bool scale = dm_state->scaling != RMX_OFF; |
| int mode_refresh; |
| int preferred_refresh = 0; |
| enum color_transfer_func tf = TRANSFER_FUNC_UNKNOWN; |
| #if defined(CONFIG_DRM_AMD_DC_FP) |
| struct dsc_dec_dpcd_caps dsc_caps; |
| #endif |
| struct dc_link *link = NULL; |
| struct dc_sink *sink = NULL; |
| |
| drm_mode_init(&mode, drm_mode); |
| memset(&saved_mode, 0, sizeof(saved_mode)); |
| |
| if (connector == NULL) { |
| DRM_ERROR("connector is NULL!\n"); |
| return stream; |
| } |
| |
| if (connector->connector_type != DRM_MODE_CONNECTOR_WRITEBACK) { |
| aconnector = NULL; |
| aconnector = to_amdgpu_dm_connector(connector); |
| link = aconnector->dc_link; |
| } else { |
| struct drm_writeback_connector *wbcon = NULL; |
| struct amdgpu_dm_wb_connector *dm_wbcon = NULL; |
| |
| wbcon = drm_connector_to_writeback(connector); |
| dm_wbcon = to_amdgpu_dm_wb_connector(wbcon); |
| link = dm_wbcon->link; |
| } |
| |
| if (!aconnector || !aconnector->dc_sink) { |
| sink = create_fake_sink(link); |
| if (!sink) |
| return stream; |
| |
| } else { |
| sink = aconnector->dc_sink; |
| dc_sink_retain(sink); |
| } |
| |
| stream = dc_create_stream_for_sink(sink); |
| |
| if (stream == NULL) { |
| DRM_ERROR("Failed to create stream for sink!\n"); |
| goto finish; |
| } |
| |
| /* We leave this NULL for writeback connectors */ |
| stream->dm_stream_context = aconnector; |
| |
| stream->timing.flags.LTE_340MCSC_SCRAMBLE = |
| connector->display_info.hdmi.scdc.scrambling.low_rates; |
| |
| list_for_each_entry(preferred_mode, &connector->modes, head) { |
| /* Search for preferred mode */ |
| if (preferred_mode->type & DRM_MODE_TYPE_PREFERRED) { |
| native_mode_found = true; |
| break; |
| } |
| } |
| if (!native_mode_found) |
| preferred_mode = list_first_entry_or_null( |
| &connector->modes, |
| struct drm_display_mode, |
| head); |
| |
| mode_refresh = drm_mode_vrefresh(&mode); |
| |
| if (preferred_mode == NULL) { |
| /* |
| * This may not be an error, the use case is when we have no |
| * usermode calls to reset and set mode upon hotplug. In this |
| * case, we call set mode ourselves to restore the previous mode |
| * and the modelist may not be filled in time. |
| */ |
| DRM_DEBUG_DRIVER("No preferred mode found\n"); |
| } else if (aconnector) { |
| recalculate_timing = amdgpu_freesync_vid_mode && |
| is_freesync_video_mode(&mode, aconnector); |
| if (recalculate_timing) { |
| freesync_mode = get_highest_refresh_rate_mode(aconnector, false); |
| drm_mode_copy(&saved_mode, &mode); |
| saved_mode.picture_aspect_ratio = mode.picture_aspect_ratio; |
| drm_mode_copy(&mode, freesync_mode); |
| mode.picture_aspect_ratio = saved_mode.picture_aspect_ratio; |
| } else { |
| decide_crtc_timing_for_drm_display_mode( |
| &mode, preferred_mode, scale); |
| |
| preferred_refresh = drm_mode_vrefresh(preferred_mode); |
| } |
| } |
| |
| if (recalculate_timing) |
| drm_mode_set_crtcinfo(&saved_mode, 0); |
| |
| /* |
| * If scaling is enabled and refresh rate didn't change |
| * we copy the vic and polarities of the old timings |
| */ |
| if (!scale || mode_refresh != preferred_refresh) |
| fill_stream_properties_from_drm_display_mode( |
| stream, &mode, connector, con_state, NULL, |
| requested_bpc); |
| else |
| fill_stream_properties_from_drm_display_mode( |
| stream, &mode, connector, con_state, old_stream, |
| requested_bpc); |
| |
| /* The rest isn't needed for writeback connectors */ |
| if (!aconnector) |
| goto finish; |
| |
| if (aconnector->timing_changed) { |
| drm_dbg(aconnector->base.dev, |
| "overriding timing for automated test, bpc %d, changing to %d\n", |
| stream->timing.display_color_depth, |
| aconnector->timing_requested->display_color_depth); |
| stream->timing = *aconnector->timing_requested; |
| } |
| |
| #if defined(CONFIG_DRM_AMD_DC_FP) |
| /* SST DSC determination policy */ |
| update_dsc_caps(aconnector, sink, stream, &dsc_caps); |
| if (aconnector->dsc_settings.dsc_force_enable != DSC_CLK_FORCE_DISABLE && dsc_caps.is_dsc_supported) |
| apply_dsc_policy_for_stream(aconnector, sink, stream, &dsc_caps); |
| #endif |
| |
| update_stream_scaling_settings(&mode, dm_state, stream); |
| |
| fill_audio_info( |
| &stream->audio_info, |
| connector, |
| sink); |
| |
| update_stream_signal(stream, sink); |
| |
| if (stream->signal == SIGNAL_TYPE_HDMI_TYPE_A) |
| mod_build_hf_vsif_infopacket(stream, &stream->vsp_infopacket); |
| |
| if (stream->signal == SIGNAL_TYPE_DISPLAY_PORT || |
| stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST || |
| stream->signal == SIGNAL_TYPE_EDP) { |
| // |
| // should decide stream support vsc sdp colorimetry capability |
| // before building vsc info packet |
| // |
| stream->use_vsc_sdp_for_colorimetry = stream->link->dpcd_caps.dpcd_rev.raw >= 0x14 && |
| stream->link->dpcd_caps.dprx_feature.bits.VSC_SDP_COLORIMETRY_SUPPORTED; |
| |
| if (stream->out_transfer_func.tf == TRANSFER_FUNCTION_GAMMA22) |
| tf = TRANSFER_FUNC_GAMMA_22; |
| mod_build_vsc_infopacket(stream, &stream->vsc_infopacket, stream->output_color_space, tf); |
| aconnector->psr_skip_count = AMDGPU_DM_PSR_ENTRY_DELAY; |
| |
| } |
| finish: |
| dc_sink_release(sink); |
| |
| return stream; |
| } |
| |
| static enum drm_connector_status |
| amdgpu_dm_connector_detect(struct drm_connector *connector, bool force) |
| { |
| bool connected; |
| struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector); |
| |
| /* |
| * Notes: |
| * 1. This interface is NOT called in context of HPD irq. |
| * 2. This interface *is called* in context of user-mode ioctl. Which |
| * makes it a bad place for *any* MST-related activity. |
| */ |
| |
| if (aconnector->base.force == DRM_FORCE_UNSPECIFIED && |
| !aconnector->fake_enable) |
| connected = (aconnector->dc_sink != NULL); |
| else |
| connected = (aconnector->base.force == DRM_FORCE_ON || |
| aconnector->base.force == DRM_FORCE_ON_DIGITAL); |
| |
| update_subconnector_property(aconnector); |
| |
| return (connected ? connector_status_connected : |
| connector_status_disconnected); |
| } |
| |
| int amdgpu_dm_connector_atomic_set_property(struct drm_connector *connector, |
| struct drm_connector_state *connector_state, |
| struct drm_property *property, |
| uint64_t val) |
| { |
| struct drm_device *dev = connector->dev; |
| struct amdgpu_device *adev = drm_to_adev(dev); |
| struct dm_connector_state *dm_old_state = |
| to_dm_connector_state(connector->state); |
| struct dm_connector_state *dm_new_state = |
| to_dm_connector_state(connector_state); |
| |
| int ret = -EINVAL; |
| |
| if (property == dev->mode_config.scaling_mode_property) { |
| enum amdgpu_rmx_type rmx_type; |
| |
| switch (val) { |
| case DRM_MODE_SCALE_CENTER: |
| rmx_type = RMX_CENTER; |
| break; |
| case DRM_MODE_SCALE_ASPECT: |
| rmx_type = RMX_ASPECT; |
| break; |
| case DRM_MODE_SCALE_FULLSCREEN: |
| rmx_type = RMX_FULL; |
| break; |
| case DRM_MODE_SCALE_NONE: |
| default: |
| rmx_type = RMX_OFF; |
| break; |
| } |
| |
| if (dm_old_state->scaling == rmx_type) |
| return 0; |
| |
| dm_new_state->scaling = rmx_type; |
| ret = 0; |
| } else if (property == adev->mode_info.underscan_hborder_property) { |
| dm_new_state->underscan_hborder = val; |
| ret = 0; |
| } else if (property == adev->mode_info.underscan_vborder_property) { |
| dm_new_state->underscan_vborder = val; |
| ret = 0; |
| } else if (property == adev->mode_info.underscan_property) { |
| dm_new_state->underscan_enable = val; |
| ret = 0; |
| } |
| |
| return ret; |
| } |
| |
| int amdgpu_dm_connector_atomic_get_property(struct drm_connector *connector, |
| const struct drm_connector_state *state, |
| struct drm_property *property, |
| uint64_t *val) |
| { |
| struct drm_device *dev = connector->dev; |
| struct amdgpu_device *adev = drm_to_adev(dev); |
| struct dm_connector_state *dm_state = |
| to_dm_connector_state(state); |
| int ret = -EINVAL; |
| |
| if (property == dev->mode_config.scaling_mode_property) { |
| switch (dm_state->scaling) { |
| case RMX_CENTER: |
| *val = DRM_MODE_SCALE_CENTER; |
| break; |
| case RMX_ASPECT: |
| *val = DRM_MODE_SCALE_ASPECT; |
| break; |
| case RMX_FULL: |
| *val = DRM_MODE_SCALE_FULLSCREEN; |
| break; |
| case RMX_OFF: |
| default: |
| *val = DRM_MODE_SCALE_NONE; |
| break; |
| } |
| ret = 0; |
| } else if (property == adev->mode_info.underscan_hborder_property) { |
| *val = dm_state->underscan_hborder; |
| ret = 0; |
| } else if (property == adev->mode_info.underscan_vborder_property) { |
| *val = dm_state->underscan_vborder; |
| ret = 0; |
| } else if (property == adev->mode_info.underscan_property) { |
| *val = dm_state->underscan_enable; |
| ret = 0; |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * DOC: panel power savings |
| * |
| * The display manager allows you to set your desired **panel power savings** |
| * level (between 0-4, with 0 representing off), e.g. using the following:: |
| * |
| * # echo 3 > /sys/class/drm/card0-eDP-1/amdgpu/panel_power_savings |
| * |
| * Modifying this value can have implications on color accuracy, so tread |
| * carefully. |
| */ |
| |
| static ssize_t panel_power_savings_show(struct device *device, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct drm_connector *connector = dev_get_drvdata(device); |
| struct drm_device *dev = connector->dev; |
| u8 val; |
| |
| drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); |
| val = to_dm_connector_state(connector->state)->abm_level == |
| ABM_LEVEL_IMMEDIATE_DISABLE ? 0 : |
| to_dm_connector_state(connector->state)->abm_level; |
| drm_modeset_unlock(&dev->mode_config.connection_mutex); |
| |
| return sysfs_emit(buf, "%u\n", val); |
| } |
| |
| static ssize_t panel_power_savings_store(struct device *device, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct drm_connector *connector = dev_get_drvdata(device); |
| struct drm_device *dev = connector->dev; |
| long val; |
| int ret; |
| |
| ret = kstrtol(buf, 0, &val); |
| |
| if (ret) |
| return ret; |
| |
| if (val < 0 || val > 4) |
| return -EINVAL; |
| |
| drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); |
| to_dm_connector_state(connector->state)->abm_level = val ?: |
| ABM_LEVEL_IMMEDIATE_DISABLE; |
| drm_modeset_unlock(&dev->mode_config.connection_mutex); |
| |
| drm_kms_helper_hotplug_event(dev); |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR_RW(panel_power_savings); |
| |
| static struct attribute *amdgpu_attrs[] = { |
| &dev_attr_panel_power_savings.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group amdgpu_group = { |
| .name = "amdgpu", |
| .attrs = amdgpu_attrs |
| }; |
| |
| static bool |
| amdgpu_dm_should_create_sysfs(struct amdgpu_dm_connector *amdgpu_dm_connector) |
| { |
| if (amdgpu_dm_abm_level >= 0) |
| return false; |
| |
| if (amdgpu_dm_connector->base.connector_type != DRM_MODE_CONNECTOR_eDP) |
| return false; |
| |
| /* check for OLED panels */ |
| if (amdgpu_dm_connector->bl_idx >= 0) { |
| struct drm_device *drm = amdgpu_dm_connector->base.dev; |
| struct amdgpu_display_manager *dm = &drm_to_adev(drm)->dm; |
| struct amdgpu_dm_backlight_caps *caps; |
| |
| caps = &dm->backlight_caps[amdgpu_dm_connector->bl_idx]; |
| if (caps->aux_support) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static void amdgpu_dm_connector_unregister(struct drm_connector *connector) |
| { |
| struct amdgpu_dm_connector *amdgpu_dm_connector = to_amdgpu_dm_connector(connector); |
| |
| if (amdgpu_dm_should_create_sysfs(amdgpu_dm_connector)) |
| sysfs_remove_group(&connector->kdev->kobj, &amdgpu_group); |
| |
| drm_dp_aux_unregister(&amdgpu_dm_connector->dm_dp_aux.aux); |
| } |
| |
| static void amdgpu_dm_connector_destroy(struct drm_connector *connector) |
| { |
| struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector); |
| struct amdgpu_device *adev = drm_to_adev(connector->dev); |
| struct amdgpu_display_manager *dm = &adev->dm; |
| |
| /* |
| * Call only if mst_mgr was initialized before since it's not done |
| * for all connector types. |
| */ |
| if (aconnector->mst_mgr.dev) |
| drm_dp_mst_topology_mgr_destroy(&aconnector->mst_mgr); |
| |
| if (aconnector->bl_idx != -1) { |
| backlight_device_unregister(dm->backlight_dev[aconnector->bl_idx]); |
| dm->backlight_dev[aconnector->bl_idx] = NULL; |
| } |
| |
| if (aconnector->dc_em_sink) |
| dc_sink_release(aconnector->dc_em_sink); |
| aconnector->dc_em_sink = NULL; |
| if (aconnector->dc_sink) |
| dc_sink_release(aconnector->dc_sink); |
| aconnector->dc_sink = NULL; |
| |
| drm_dp_cec_unregister_connector(&aconnector->dm_dp_aux.aux); |
| drm_connector_unregister(connector); |
| drm_connector_cleanup(connector); |
| if (aconnector->i2c) { |
| i2c_del_adapter(&aconnector->i2c->base); |
| kfree(aconnector->i2c); |
| } |
| kfree(aconnector->dm_dp_aux.aux.name); |
| |
| kfree(connector); |
| } |
| |
| void amdgpu_dm_connector_funcs_reset(struct drm_connector *connector) |
| { |
| struct dm_connector_state *state = |
| to_dm_connector_state(connector->state); |
| |
| if (connector->state) |
| __drm_atomic_helper_connector_destroy_state(connector->state); |
| |
| kfree(state); |
| |
| state = kzalloc(sizeof(*state), GFP_KERNEL); |
| |
| if (state) { |
| state->scaling = RMX_OFF; |
| state->underscan_enable = false; |
| state->underscan_hborder = 0; |
| state->underscan_vborder = 0; |
| state->base.max_requested_bpc = 8; |
| state->vcpi_slots = 0; |
| state->pbn = 0; |
| |
| if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) { |
| if (amdgpu_dm_abm_level <= 0) |
| state->abm_level = ABM_LEVEL_IMMEDIATE_DISABLE; |
| else |
| state->abm_level = amdgpu_dm_abm_level; |
| } |
| |
| __drm_atomic_helper_connector_reset(connector, &state->base); |
| } |
| } |
| |
| struct drm_connector_state * |
| amdgpu_dm_connector_atomic_duplicate_state(struct drm_connector *connector) |
| { |
| struct dm_connector_state *state = |
| to_dm_connector_state(connector->state); |
| |
| struct dm_connector_state *new_state = |
| kmemdup(state, sizeof(*state), GFP_KERNEL); |
| |
| if (!new_state) |
| return NULL; |
| |
| __drm_atomic_helper_connector_duplicate_state(connector, &new_state->base); |
| |
| new_state->freesync_capable = state->freesync_capable; |
| new_state->abm_level = state->abm_level; |
| new_state->scaling = state->scaling; |
| new_state->underscan_enable = state->underscan_enable; |
| new_state->underscan_hborder = state->underscan_hborder; |
| new_state->underscan_vborder = state->underscan_vborder; |
| new_state->vcpi_slots = state->vcpi_slots; |
| new_state->pbn = state->pbn; |
| return &new_state->base; |
| } |
| |
| static int |
| amdgpu_dm_connector_late_register(struct drm_connector *connector) |
| { |
| struct amdgpu_dm_connector *amdgpu_dm_connector = |
| to_amdgpu_dm_connector(connector); |
| int r; |
| |
| if (amdgpu_dm_should_create_sysfs(amdgpu_dm_connector)) { |
| r = sysfs_create_group(&connector->kdev->kobj, |
| &amdgpu_group); |
| if (r) |
| return r; |
| } |
| |
| amdgpu_dm_register_backlight_device(amdgpu_dm_connector); |
| |
| if ((connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort) || |
| (connector->connector_type == DRM_MODE_CONNECTOR_eDP)) { |
| amdgpu_dm_connector->dm_dp_aux.aux.dev = connector->kdev; |
| r = drm_dp_aux_register(&amdgpu_dm_connector->dm_dp_aux.aux); |
| if (r) |
| return r; |
| } |
| |
| #if defined(CONFIG_DEBUG_FS) |
| connector_debugfs_init(amdgpu_dm_connector); |
| #endif |
| |
| return 0; |
| } |
| |
| static void amdgpu_dm_connector_funcs_force(struct drm_connector *connector) |
| { |
| struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector); |
| struct dc_link *dc_link = aconnector->dc_link; |
| struct dc_sink *dc_em_sink = aconnector->dc_em_sink; |
| struct edid *edid; |
| struct i2c_adapter *ddc; |
| |
| if (dc_link && dc_link->aux_mode) |
| ddc = &aconnector->dm_dp_aux.aux.ddc; |
| else |
| ddc = &aconnector->i2c->base; |
| |
| /* |
| * Note: drm_get_edid gets edid in the following order: |
| * 1) override EDID if set via edid_override debugfs, |
| * 2) firmware EDID if set via edid_firmware module parameter |
| * 3) regular DDC read. |
| */ |
| edid = drm_get_edid(connector, ddc); |
| if (!edid) { |
| DRM_ERROR("No EDID found on connector: %s.\n", connector->name); |
| return; |
| } |
| |
| aconnector->edid = edid; |
| |
| /* Update emulated (virtual) sink's EDID */ |
| if (dc_em_sink && dc_link) { |
| memset(&dc_em_sink->edid_caps, 0, sizeof(struct dc_edid_caps)); |
| memmove(dc_em_sink->dc_edid.raw_edid, edid, (edid->extensions + 1) * EDID_LENGTH); |
| dm_helpers_parse_edid_caps( |
| dc_link, |
| &dc_em_sink->dc_edid, |
| &dc_em_sink->edid_caps); |
| } |
| } |
| |
| static const struct drm_connector_funcs amdgpu_dm_connector_funcs = { |
| .reset = amdgpu_dm_connector_funcs_reset, |
| .detect = amdgpu_dm_connector_detect, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .destroy = amdgpu_dm_connector_destroy, |
| .atomic_duplicate_state = amdgpu_dm_connector_atomic_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| .atomic_set_property = amdgpu_dm_connector_atomic_set_property, |
| .atomic_get_property = amdgpu_dm_connector_atomic_get_property, |
| .late_register = amdgpu_dm_connector_late_register, |
| .early_unregister = amdgpu_dm_connector_unregister, |
| .force = amdgpu_dm_connector_funcs_force |
| }; |
| |
| static int get_modes(struct drm_connector *connector) |
| { |
| return amdgpu_dm_connector_get_modes(connector); |
| } |
| |
| static void create_eml_sink(struct amdgpu_dm_connector *aconnector) |
| { |
| struct drm_connector *connector = &aconnector->base; |
| struct dc_link *dc_link = aconnector->dc_link; |
| struct dc_sink_init_data init_params = { |
| .link = aconnector->dc_link, |
| .sink_signal = SIGNAL_TYPE_VIRTUAL |
| }; |
| struct edid *edid; |
| struct i2c_adapter *ddc; |
| |
| if (dc_link->aux_mode) |
| ddc = &aconnector->dm_dp_aux.aux.ddc; |
| else |
| ddc = &aconnector->i2c->base; |
| |
| /* |
| * Note: drm_get_edid gets edid in the following order: |
| * 1) override EDID if set via edid_override debugfs, |
| * 2) firmware EDID if set via edid_firmware module parameter |
| * 3) regular DDC read. |
| */ |
| edid = drm_get_edid(connector, ddc); |
| if (!edid) { |
| DRM_ERROR("No EDID found on connector: %s.\n", connector->name); |
| return; |
| } |
| |
| if (drm_detect_hdmi_monitor(edid)) |
| init_params.sink_signal = SIGNAL_TYPE_HDMI_TYPE_A; |
| |
| aconnector->edid = edid; |
| |
| aconnector->dc_em_sink = dc_link_add_remote_sink( |
| aconnector->dc_link, |
| (uint8_t *)edid, |
| (edid->extensions + 1) * EDID_LENGTH, |
| &init_params); |
| |
| if (aconnector->base.force == DRM_FORCE_ON) { |
| aconnector->dc_sink = aconnector->dc_link->local_sink ? |
| aconnector->dc_link->local_sink : |
| aconnector->dc_em_sink; |
| if (aconnector->dc_sink) |
| dc_sink_retain(aconnector->dc_sink); |
| } |
| } |
| |
| static void handle_edid_mgmt(struct amdgpu_dm_connector *aconnector) |
| { |
| struct dc_link *link = (struct dc_link *)aconnector->dc_link; |
| |
| /* |
| * In case of headless boot with force on for DP managed connector |
| * Those settings have to be != 0 to get initial modeset |
| */ |
| if (link->connector_signal == SIGNAL_TYPE_DISPLAY_PORT) { |
| link->verified_link_cap.lane_count = LANE_COUNT_FOUR; |
| link->verified_link_cap.link_rate = LINK_RATE_HIGH2; |
| } |
| |
| create_eml_sink(aconnector); |
| } |
| |
| static enum dc_status dm_validate_stream_and_context(struct dc *dc, |
| struct dc_stream_state *stream) |
| { |
| enum dc_status dc_result = DC_ERROR_UNEXPECTED; |
| struct dc_plane_state *dc_plane_state = NULL; |
| struct dc_state *dc_state = NULL; |
| |
| if (!stream) |
| goto cleanup; |
| |
| dc_plane_state = dc_create_plane_state(dc); |
| if (!dc_plane_state) |
| goto cleanup; |
| |
| dc_state = dc_state_create(dc, NULL); |
| if (!dc_state) |
| goto cleanup; |
| |
| /* populate stream to plane */ |
| dc_plane_state->src_rect.height = stream->src.height; |
| dc_plane_state->src_rect.width = stream->src.width; |
| dc_plane_state->dst_rect.height = stream->src.height; |
| dc_plane_state->dst_rect.width = stream->src.width; |
| dc_plane_state->clip_rect.height = stream->src.height; |
| dc_plane_state->clip_rect.width = stream->src.width; |
| dc_plane_state->plane_size.surface_pitch = ((stream->src.width + 255) / 256) * 256; |
| dc_plane_state->plane_size.surface_size.height = stream->src.height; |
| dc_plane_state->plane_size.surface_size.width = stream->src.width; |
| dc_plane_state->plane_size.chroma_size.height = stream->src.height; |
| dc_plane_state->plane_size.chroma_size.width = stream->src.width; |
| dc_plane_state->format = SURFACE_PIXEL_FORMAT_GRPH_ARGB8888; |
| dc_plane_state->tiling_info.gfx9.swizzle = DC_SW_UNKNOWN; |
| dc_plane_state->rotation = ROTATION_ANGLE_0; |
| dc_plane_state->is_tiling_rotated = false; |
| dc_plane_state->tiling_info.gfx8.array_mode = DC_ARRAY_LINEAR_GENERAL; |
| |
| dc_result = dc_validate_stream(dc, stream); |
| if (dc_result == DC_OK) |
| dc_result = dc_validate_plane(dc, dc_plane_state); |
| |
| if (dc_result == DC_OK) |
| dc_result = dc_state_add_stream(dc, dc_state, stream); |
| |
| if (dc_result == DC_OK && !dc_state_add_plane( |
| dc, |
| stream, |
| dc_plane_state, |
| dc_state)) |
| dc_result = DC_FAIL_ATTACH_SURFACES; |
| |
| if (dc_result == DC_OK) |
| dc_result = dc_validate_global_state(dc, dc_state, true); |
| |
| cleanup: |
| if (dc_state) |
| dc_state_release(dc_state); |
| |
| if (dc_plane_state) |
| dc_plane_state_release(dc_plane_state); |
| |
| return dc_result; |
| } |
| |
| struct dc_stream_state * |
| create_validate_stream_for_sink(struct amdgpu_dm_connector *aconnector, |
| const struct drm_display_mode *drm_mode, |
| const struct dm_connector_state *dm_state, |
| const struct dc_stream_state *old_stream) |
| { |
| struct drm_connector *connector = &aconnector->base; |
| struct amdgpu_device *adev = drm_to_adev(connector->dev); |
| struct dc_stream_state *stream; |
| const struct drm_connector_state *drm_state = dm_state ? &dm_state->base : NULL; |
| int requested_bpc = drm_state ? drm_state->max_requested_bpc : 8; |
| enum dc_status dc_result = DC_OK; |
| |
| do { |
| stream = create_stream_for_sink(connector, drm_mode, |
| dm_state, old_stream, |
| requested_bpc); |
| if (stream == NULL) { |
| DRM_ERROR("Failed to create stream for sink!\n"); |
| break; |
| } |
| |
| if (aconnector->base.connector_type == DRM_MODE_CONNECTOR_WRITEBACK) |
| return stream; |
| |
| dc_result = dc_validate_stream(adev->dm.dc, stream); |
| if (dc_result == DC_OK && stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST) |
| dc_result = dm_dp_mst_is_port_support_mode(aconnector, stream); |
| |
| if (dc_result == DC_OK) |
| dc_result = dm_validate_stream_and_context(adev->dm.dc, stream); |
| |
| if (dc_result != DC_OK) { |
| DRM_DEBUG_KMS("Mode %dx%d (clk %d) failed DC validation with error %d (%s)\n", |
| drm_mode->hdisplay, |
| drm_mode->vdisplay, |
| drm_mode->clock, |
| dc_result, |
| dc_status_to_str(dc_result)); |
| |
| dc_stream_release(stream); |
| stream = NULL; |
| requested_bpc -= 2; /* lower bpc to retry validation */ |
| } |
| |
| } while (stream == NULL && requested_bpc >= 6); |
| |
| if (dc_result == DC_FAIL_ENC_VALIDATE && !aconnector->force_yuv420_output) { |
| DRM_DEBUG_KMS("Retry forcing YCbCr420 encoding\n"); |
| |
| aconnector->force_yuv420_output = true; |
| stream = create_validate_stream_for_sink(aconnector, drm_mode, |
| dm_state, old_stream); |
| aconnector->force_yuv420_output = false; |
| } |
| |
| return stream; |
| } |
| |
| enum drm_mode_status amdgpu_dm_connector_mode_valid(struct drm_connector *connector, |
| struct drm_display_mode *mode) |
| { |
| int result = MODE_ERROR; |
| struct dc_sink *dc_sink; |
| /* TODO: Unhardcode stream count */ |
| struct dc_stream_state *stream; |
| struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector); |
| |
| if ((mode->flags & DRM_MODE_FLAG_INTERLACE) || |
| (mode->flags & DRM_MODE_FLAG_DBLSCAN)) |
| return result; |
| |
| /* |
| * Only run this the first time mode_valid is called to initilialize |
| * EDID mgmt |
| */ |
| if (aconnector->base.force != DRM_FORCE_UNSPECIFIED && |
| !aconnector->dc_em_sink) |
| handle_edid_mgmt(aconnector); |
| |
| dc_sink = to_amdgpu_dm_connector(connector)->dc_sink; |
| |
| if (dc_sink == NULL && aconnector->base.force != DRM_FORCE_ON_DIGITAL && |
| aconnector->base.force != DRM_FORCE_ON) { |
| DRM_ERROR("dc_sink is NULL!\n"); |
| goto fail; |
| } |
| |
| drm_mode_set_crtcinfo(mode, 0); |
| |
| stream = create_validate_stream_for_sink(aconnector, mode, |
| to_dm_connector_state(connector->state), |
| NULL); |
| if (stream) { |
| dc_stream_release(stream); |
| result = MODE_OK; |
| } |
| |
| fail: |
| /* TODO: error handling*/ |
| return result; |
| } |
| |
| static int fill_hdr_info_packet(const struct drm_connector_state *state, |
| struct dc_info_packet *out) |
| { |
| struct hdmi_drm_infoframe frame; |
| unsigned char buf[30]; /* 26 + 4 */ |
| ssize_t len; |
| int ret, i; |
| |
| memset(out, 0, sizeof(*out)); |
| |
| if (!state->hdr_output_metadata) |
| return 0; |
| |
| ret = drm_hdmi_infoframe_set_hdr_metadata(&frame, state); |
| if (ret) |
| return ret; |
| |
| len = hdmi_drm_infoframe_pack_only(&frame, buf, sizeof(buf)); |
| if (len < 0) |
| return (int)len; |
| |
| /* Static metadata is a fixed 26 bytes + 4 byte header. */ |
| if (len != 30) |
| return -EINVAL; |
| |
| /* Prepare the infopacket for DC. */ |
| switch (state->connector->connector_type) { |
| case DRM_MODE_CONNECTOR_HDMIA: |
| out->hb0 = 0x87; /* type */ |
| out->hb1 = 0x01; /* version */ |
| out->hb2 = 0x1A; /* length */ |
| out->sb[0] = buf[3]; /* checksum */ |
| i = 1; |
| break; |
| |
| case DRM_MODE_CONNECTOR_DisplayPort: |
| case DRM_MODE_CONNECTOR_eDP: |
| out->hb0 = 0x00; /* sdp id, zero */ |
| out->hb1 = 0x87; /* type */ |
| out->hb2 = 0x1D; /* payload len - 1 */ |
| out->hb3 = (0x13 << 2); /* sdp version */ |
| out->sb[0] = 0x01; /* version */ |
| out->sb[1] = 0x1A; /* length */ |
| i = 2; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| memcpy(&out->sb[i], &buf[4], 26); |
| out->valid = true; |
| |
| print_hex_dump(KERN_DEBUG, "HDR SB:", DUMP_PREFIX_NONE, 16, 1, out->sb, |
| sizeof(out->sb), false); |
| |
| return 0; |
| } |
| |
| static int |
| amdgpu_dm_connector_atomic_check(struct drm_connector *conn, |
| struct drm_atomic_state *state) |
| { |
| struct drm_connector_state *new_con_state = |
| drm_atomic_get_new_connector_state(state, conn); |
| struct drm_connector_state *old_con_state = |
| drm_atomic_get_old_connector_state(state, conn); |
| struct drm_crtc *crtc = new_con_state->crtc; |
| struct drm_crtc_state *new_crtc_state; |
| struct amdgpu_dm_connector *aconn = to_amdgpu_dm_connector(conn); |
| int ret; |
| |
| trace_amdgpu_dm_connector_atomic_check(new_con_state); |
| |
| if (conn->connector_type == DRM_MODE_CONNECTOR_DisplayPort) { |
| ret = drm_dp_mst_root_conn_atomic_check(new_con_state, &aconn->mst_mgr); |
| if (ret < 0) |
| return ret; |
| } |
| |
| if (!crtc) |
| return 0; |
| |
| if (new_con_state->colorspace != old_con_state->colorspace) { |
| new_crtc_state = drm_atomic_get_crtc_state(state, crtc); |
| if (IS_ERR(new_crtc_state)) |
| return PTR_ERR(new_crtc_state); |
| |
| new_crtc_state->mode_changed = true; |
| } |
| |
| if (new_con_state->content_type != old_con_state->content_type) { |
| new_crtc_state = drm_atomic_get_crtc_state(state, crtc); |
| if (IS_ERR(new_crtc_state)) |
| return PTR_ERR(new_crtc_state); |
| |
| new_crtc_state->mode_changed = true; |
| } |
| |
| if (!drm_connector_atomic_hdr_metadata_equal(old_con_state, new_con_state)) { |
| struct dc_info_packet hdr_infopacket; |
| |
| ret = fill_hdr_info_packet(new_con_state, &hdr_infopacket); |
| if (ret) |
| return ret; |
| |
| new_crtc_state = drm_atomic_get_crtc_state(state, crtc); |
| if (IS_ERR(new_crtc_state)) |
| return PTR_ERR(new_crtc_state); |
| |
| /* |
| * DC considers the stream backends changed if the |
| * static metadata changes. Forcing the modeset also |
| * gives a simple way for userspace to switch from |
| * 8bpc to 10bpc when setting the metadata to enter |
| * or exit HDR. |
| * |
| * Changing the static metadata after it's been |
| * set is permissible, however. So only force a |
| * modeset if we're entering or exiting HDR. |
| */ |
| new_crtc_state->mode_changed = new_crtc_state->mode_changed || |
| !old_con_state->hdr_output_metadata || |
| !new_con_state->hdr_output_metadata; |
| } |
| |
| return 0; |
| } |
| |
| static const struct drm_connector_helper_funcs |
| amdgpu_dm_connector_helper_funcs = { |
| /* |
| * If hotplugging a second bigger display in FB Con mode, bigger resolution |
| * modes will be filtered by drm_mode_validate_size(), and those modes |
| * are missing after user start lightdm. So we need to renew modes list. |
| * in get_modes call back, not just return the modes count |
| */ |
| .get_modes = get_modes, |
| .mode_valid = amdgpu_dm_connector_mode_valid, |
| .atomic_check = amdgpu_dm_connector_atomic_check, |
| }; |
| |
| static void dm_encoder_helper_disable(struct drm_encoder *encoder) |
| { |
| |
| } |
| |
| int convert_dc_color_depth_into_bpc(enum dc_color_depth display_color_depth) |
| { |
| switch (display_color_depth) { |
| case COLOR_DEPTH_666: |
| return 6; |
| case COLOR_DEPTH_888: |
| return 8; |
| case COLOR_DEPTH_101010: |
| return 10; |
| case COLOR_DEPTH_121212: |
| return 12; |
| case COLOR_DEPTH_141414: |
| return 14; |
| case COLOR_DEPTH_161616: |
| return 16; |
| default: |
| break; |
| } |
| return 0; |
| } |
| |
| static int dm_encoder_helper_atomic_check(struct drm_encoder *encoder, |
| struct drm_crtc_state *crtc_state, |
| struct drm_connector_state *conn_state) |
| { |
| struct drm_atomic_state *state = crtc_state->state; |
| struct drm_connector *connector = conn_state->connector; |
| struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector); |
| struct dm_connector_state *dm_new_connector_state = to_dm_connector_state(conn_state); |
| const struct drm_display_mode *adjusted_mode = &crtc_state->adjusted_mode; |
| struct drm_dp_mst_topology_mgr *mst_mgr; |
| struct drm_dp_mst_port *mst_port; |
| struct drm_dp_mst_topology_state *mst_state; |
| enum dc_color_depth color_depth; |
| int clock, bpp = 0; |
| bool is_y420 = false; |
| |
| if (!aconnector->mst_output_port) |
| return 0; |
| |
| mst_port = aconnector->mst_output_port; |
| mst_mgr = &aconnector->mst_root->mst_mgr; |
| |
| if (!crtc_state->connectors_changed && !crtc_state->mode_changed) |
| return 0; |
| |
| mst_state = drm_atomic_get_mst_topology_state(state, mst_mgr); |
| if (IS_ERR(mst_state)) |
| return PTR_ERR(mst_state); |
| |
| mst_state->pbn_div.full = dfixed_const(dm_mst_get_pbn_divider(aconnector->mst_root->dc_link)); |
| |
| if (!state->duplicated) { |
| int max_bpc = conn_state->max_requested_bpc; |
| |
| is_y420 = drm_mode_is_420_also(&connector->display_info, adjusted_mode) && |
| aconnector->force_yuv420_output; |
| color_depth = convert_color_depth_from_display_info(connector, |
| is_y420, |
| max_bpc); |
| bpp = convert_dc_color_depth_into_bpc(color_depth) * 3; |
| clock = adjusted_mode->clock; |
| dm_new_connector_state->pbn = drm_dp_calc_pbn_mode(clock, bpp << 4); |
| } |
| |
| dm_new_connector_state->vcpi_slots = |
| drm_dp_atomic_find_time_slots(state, mst_mgr, mst_port, |
| dm_new_connector_state->pbn); |
| if (dm_new_connector_state->vcpi_slots < 0) { |
| DRM_DEBUG_ATOMIC("failed finding vcpi slots: %d\n", (int)dm_new_connector_state->vcpi_slots); |
| return dm_new_connector_state->vcpi_slots; |
| } |
| return 0; |
| } |
| |
| const struct drm_encoder_helper_funcs amdgpu_dm_encoder_helper_funcs = { |
| .disable = dm_encoder_helper_disable, |
| .atomic_check = dm_encoder_helper_atomic_check |
| }; |
| |
| static int dm_update_mst_vcpi_slots_for_dsc(struct drm_atomic_state *state, |
| struct dc_state *dc_state, |
| struct dsc_mst_fairness_vars *vars) |
| { |
| struct dc_stream_state *stream = NULL; |
| struct drm_connector *connector; |
| struct drm_connector_state *new_con_state; |
| struct amdgpu_dm_connector *aconnector; |
| struct dm_connector_state *dm_conn_state; |
| int i, j, ret; |
| int vcpi, pbn_div, pbn = 0, slot_num = 0; |
| |
| for_each_new_connector_in_state(state, connector, new_con_state, i) { |
| |
| if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK) |
| continue; |
| |
| aconnector = to_amdgpu_dm_connector(connector); |
| |
| if (!aconnector->mst_output_port) |
| continue; |
| |
| if (!new_con_state || !new_con_state->crtc) |
| continue; |
| |
| dm_conn_state = to_dm_connector_state(new_con_state); |
| |
| for (j = 0; j < dc_state->stream_count; j++) { |
| stream = dc_state->streams[j]; |
| if (!stream) |
| continue; |
| |
| if ((struct amdgpu_dm_connector *)stream->dm_stream_context == aconnector) |
| break; |
| |
| stream = NULL; |
| } |
| |
| if (!stream) |
| continue; |
| |
| pbn_div = dm_mst_get_pbn_divider(stream->link); |
| /* pbn is calculated by compute_mst_dsc_configs_for_state*/ |
| for (j = 0; j < dc_state->stream_count; j++) { |
| if (vars[j].aconnector == aconnector) { |
| pbn = vars[j].pbn; |
| break; |
| } |
| } |
| |
| if (j == dc_state->stream_count || pbn_div == 0) |
| continue; |
| |
| slot_num = DIV_ROUND_UP(pbn, pbn_div); |
| |
| if (stream->timing.flags.DSC != 1) { |
| dm_conn_state->pbn = pbn; |
| dm_conn_state->vcpi_slots = slot_num; |
| |
| ret = drm_dp_mst_atomic_enable_dsc(state, aconnector->mst_output_port, |
| dm_conn_state->pbn, false); |
| if (ret < 0) |
| return ret; |
| |
| continue; |
| } |
| |
| vcpi = drm_dp_mst_atomic_enable_dsc(state, aconnector->mst_output_port, pbn, true); |
| if (vcpi < 0) |
| return vcpi; |
| |
| dm_conn_state->pbn = pbn; |
| dm_conn_state->vcpi_slots = vcpi; |
| } |
| return 0; |
| } |
| |
| static int to_drm_connector_type(enum signal_type st) |
| { |
| switch (st) { |
| case SIGNAL_TYPE_HDMI_TYPE_A: |
| return DRM_MODE_CONNECTOR_HDMIA; |
| case SIGNAL_TYPE_EDP: |
| return DRM_MODE_CONNECTOR_eDP; |
| case SIGNAL_TYPE_LVDS: |
| return DRM_MODE_CONNECTOR_LVDS; |
| case SIGNAL_TYPE_RGB: |
| return DRM_MODE_CONNECTOR_VGA; |
| case SIGNAL_TYPE_DISPLAY_PORT: |
| case SIGNAL_TYPE_DISPLAY_PORT_MST: |
| return DRM_MODE_CONNECTOR_DisplayPort; |
| case SIGNAL_TYPE_DVI_DUAL_LINK: |
| case SIGNAL_TYPE_DVI_SINGLE_LINK: |
| return DRM_MODE_CONNECTOR_DVID; |
| case SIGNAL_TYPE_VIRTUAL: |
| return DRM_MODE_CONNECTOR_VIRTUAL; |
| |
| default: |
| return DRM_MODE_CONNECTOR_Unknown; |
| } |
| } |
| |
| static struct drm_encoder *amdgpu_dm_connector_to_encoder(struct drm_connector *connector) |
| { |
| struct drm_encoder *encoder; |
| |
| /* There is only one encoder per connector */ |
| drm_connector_for_each_possible_encoder(connector, encoder) |
| return encoder; |
| |
| return NULL; |
| } |
| |
| static void amdgpu_dm_get_native_mode(struct drm_connector *connector) |
| { |
| struct drm_encoder *encoder; |
| struct amdgpu_encoder *amdgpu_encoder; |
| |
| encoder = amdgpu_dm_connector_to_encoder(connector); |
| |
| if (encoder == NULL) |
| return; |
| |
| amdgpu_encoder = to_amdgpu_encoder(encoder); |
| |
| amdgpu_encoder->native_mode.clock = 0; |
| |
| if (!list_empty(&connector->probed_modes)) { |
| struct drm_display_mode *preferred_mode = NULL; |
| |
| list_for_each_entry(preferred_mode, |
| &connector->probed_modes, |
| head) { |
| if (preferred_mode->type & DRM_MODE_TYPE_PREFERRED) |
| amdgpu_encoder->native_mode = *preferred_mode; |
| |
| break; |
| } |
| |
| } |
| } |
| |
| static struct drm_display_mode * |
| amdgpu_dm_create_common_mode(struct drm_encoder *encoder, |
| char *name, |
| int hdisplay, int vdisplay) |
| { |
| struct drm_device *dev = encoder->dev; |
| struct amdgpu_encoder *amdgpu_encoder = to_amdgpu_encoder(encoder); |
| struct drm_display_mode *mode = NULL; |
| struct drm_display_mode *native_mode = &amdgpu_encoder->native_mode; |
| |
| mode = drm_mode_duplicate(dev, native_mode); |
| |
| if (mode == NULL) |
| return NULL; |
| |
| mode->hdisplay = hdisplay; |
| mode->vdisplay = vdisplay; |
| mode->type &= ~DRM_MODE_TYPE_PREFERRED; |
| strscpy(mode->name, name, DRM_DISPLAY_MODE_LEN); |
| |
| return mode; |
| |
| } |
| |
| static void amdgpu_dm_connector_add_common_modes(struct drm_encoder *encoder, |
| struct drm_connector *connector) |
| { |
| struct amdgpu_encoder *amdgpu_encoder = to_amdgpu_encoder(encoder); |
| struct drm_display_mode *mode = NULL; |
| struct drm_display_mode *native_mode = &amdgpu_encoder->native_mode; |
| struct amdgpu_dm_connector *amdgpu_dm_connector = |
| to_amdgpu_dm_connector(connector); |
| int i; |
| int n; |
| struct mode_size { |
| char name[DRM_DISPLAY_MODE_LEN]; |
| int w; |
| int h; |
| } common_modes[] = { |
| { "640x480", 640, 480}, |
| { "800x600", 800, 600}, |
| { "1024x768", 1024, 768}, |
| { "1280x720", 1280, 720}, |
| { "1280x800", 1280, 800}, |
| {"1280x1024", 1280, 1024}, |
| { "1440x900", 1440, 900}, |
| {"1680x1050", 1680, 1050}, |
| {"1600x1200", 1600, 1200}, |
| {"1920x1080", 1920, 1080}, |
| {"1920x1200", 1920, 1200} |
| }; |
| |
| n = ARRAY_SIZE(common_modes); |
| |
| for (i = 0; i < n; i++) { |
| struct drm_display_mode *curmode = NULL; |
| bool mode_existed = false; |
| |
| if (common_modes[i].w > native_mode->hdisplay || |
| common_modes[i].h > native_mode->vdisplay || |
| (common_modes[i].w == native_mode->hdisplay && |
| common_modes[i].h == native_mode->vdisplay)) |
| continue; |
| |
| list_for_each_entry(curmode, &connector->probed_modes, head) { |
| if (common_modes[i].w == curmode->hdisplay && |
| common_modes[i].h == curmode->vdisplay) { |
| mode_existed = true; |
| break; |
| } |
| } |
| |
| if (mode_existed) |
| continue; |
| |
| mode = amdgpu_dm_create_common_mode(encoder, |
| common_modes[i].name, common_modes[i].w, |
| common_modes[i].h); |
| if (!mode) |
| continue; |
| |
| drm_mode_probed_add(connector, mode); |
| amdgpu_dm_connector->num_modes++; |
| } |
| } |
| |
| static void amdgpu_set_panel_orientation(struct drm_connector *connector) |
| { |
| struct drm_encoder *encoder; |
| struct amdgpu_encoder *amdgpu_encoder; |
| const struct drm_display_mode *native_mode; |
| |
| if (connector->connector_type != DRM_MODE_CONNECTOR_eDP && |
| connector->connector_type != DRM_MODE_CONNECTOR_LVDS) |
| return; |
| |
| mutex_lock(&connector->dev->mode_config.mutex); |
| amdgpu_dm_connector_get_modes(connector); |
| mutex_unlock(&connector->dev->mode_config.mutex); |
| |
| encoder = amdgpu_dm_connector_to_encoder(connector); |
| if (!encoder) |
| return; |
| |
| amdgpu_encoder = to_amdgpu_encoder(encoder); |
| |
| native_mode = &amdgpu_encoder->native_mode; |
| if (native_mode->hdisplay == 0 || native_mode->vdisplay == 0) |
| return; |
| |
| drm_connector_set_panel_orientation_with_quirk(connector, |
| DRM_MODE_PANEL_ORIENTATION_UNKNOWN, |
| native_mode->hdisplay, |
| native_mode->vdisplay); |
| } |
| |
| static void amdgpu_dm_connector_ddc_get_modes(struct drm_connector *connector, |
| struct edid *edid) |
| { |
| struct amdgpu_dm_connector *amdgpu_dm_connector = |
| to_amdgpu_dm_connector(connector); |
| |
| if (edid) { |
| /* empty probed_modes */ |
| INIT_LIST_HEAD(&connector->probed_modes); |
| amdgpu_dm_connector->num_modes = |
| drm_add_edid_modes(connector, edid); |
| |
| /* sorting the probed modes before calling function |
| * amdgpu_dm_get_native_mode() since EDID can have |
| * more than one preferred mode. The modes that are |
| * later in the probed mode list could be of higher |
| * and preferred resolution. For example, 3840x2160 |
| * resolution in base EDID preferred timing and 4096x2160 |
| * preferred resolution in DID extension block later. |
| */ |
| drm_mode_sort(&connector->probed_modes); |
| amdgpu_dm_get_native_mode(connector); |
| |
| /* Freesync capabilities are reset by calling |
| * drm_add_edid_modes() and need to be |
| * restored here. |
| */ |
| amdgpu_dm_update_freesync_caps(connector, edid); |
| } else { |
| amdgpu_dm_connector->num_modes = 0; |
| } |
| } |
| |
| static bool is_duplicate_mode(struct amdgpu_dm_connector *aconnector, |
| struct drm_display_mode *mode) |
| { |
| struct drm_display_mode *m; |
| |
| list_for_each_entry(m, &aconnector->base.probed_modes, head) { |
| if (drm_mode_equal(m, mode)) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static uint add_fs_modes(struct amdgpu_dm_connector *aconnector) |
| { |
| const struct drm_display_mode *m; |
| struct drm_display_mode *new_mode; |
| uint i; |
| u32 new_modes_count = 0; |
| |
| /* Standard FPS values |
| * |
| * 23.976 - TV/NTSC |
| * 24 - Cinema |
| * 25 - TV/PAL |
| * 29.97 - TV/NTSC |
| * 30 - TV/NTSC |
| * 48 - Cinema HFR |
| * 50 - TV/PAL |
| * 60 - Commonly used |
| * 48,72,96,120 - Multiples of 24 |
| */ |
| static const u32 common_rates[] = { |
| 23976, 24000, 25000, 29970, 30000, |
| 48000, 50000, 60000, 72000, 96000, 120000 |
| }; |
| |
| /* |
| * Find mode with highest refresh rate with the same resolution |
| * as the preferred mode. Some monitors report a preferred mode |
| * with lower resolution than the highest refresh rate supported. |
| */ |
| |
| m = get_highest_refresh_rate_mode(aconnector, true); |
| if (!m) |
| return 0; |
| |
| for (i = 0; i < ARRAY_SIZE(common_rates); i++) { |
| u64 target_vtotal, target_vtotal_diff; |
| u64 num, den; |
| |
| if (drm_mode_vrefresh(m) * 1000 < common_rates[i]) |
| continue; |
| |
| if (common_rates[i] < aconnector->min_vfreq * 1000 || |
| common_rates[i] > aconnector->max_vfreq * 1000) |
| continue; |
| |
| num = (unsigned long long)m->clock * 1000 * 1000; |
| den = common_rates[i] * (unsigned long long)m->htotal; |
| target_vtotal = div_u64(num, den); |
| target_vtotal_diff = target_vtotal - m->vtotal; |
| |
| /* Check for illegal modes */ |
| if (m->vsync_start + target_vtotal_diff < m->vdisplay || |
| m->vsync_end + target_vtotal_diff < m->vsync_start || |
| m->vtotal + target_vtotal_diff < m->vsync_end) |
| continue; |
| |
| new_mode = drm_mode_duplicate(aconnector->base.dev, m); |
| if (!new_mode) |
| goto out; |
| |
| new_mode->vtotal += (u16)target_vtotal_diff; |
| new_mode->vsync_start += (u16)target_vtotal_diff; |
| new_mode->vsync_end += (u16)target_vtotal_diff; |
| new_mode->type &= ~DRM_MODE_TYPE_PREFERRED; |
| new_mode->type |= DRM_MODE_TYPE_DRIVER; |
| |
| if (!is_duplicate_mode(aconnector, new_mode)) { |
| drm_mode_probed_add(&aconnector->base, new_mode); |
| new_modes_count += 1; |
| } else |
| drm_mode_destroy(aconnector->base.dev, new_mode); |
| } |
| out: |
| return new_modes_count; |
| } |
| |
| static void amdgpu_dm_connector_add_freesync_modes(struct drm_connector *connector, |
| struct edid *edid) |
| { |
| struct amdgpu_dm_connector *amdgpu_dm_connector = |
| to_amdgpu_dm_connector(connector); |
| |
| if (!(amdgpu_freesync_vid_mode && edid)) |
| return; |
| |
| if (amdgpu_dm_connector->max_vfreq - amdgpu_dm_connector->min_vfreq > 10) |
| amdgpu_dm_connector->num_modes += |
| add_fs_modes(amdgpu_dm_connector); |
| } |
| |
| static int amdgpu_dm_connector_get_modes(struct drm_connector *connector) |
| { |
| struct amdgpu_dm_connector *amdgpu_dm_connector = |
| to_amdgpu_dm_connector(connector); |
| struct drm_encoder *encoder; |
| struct edid *edid = amdgpu_dm_connector->edid; |
| struct dc_link_settings *verified_link_cap = |
| &amdgpu_dm_connector->dc_link->verified_link_cap; |
| const struct dc *dc = amdgpu_dm_connector->dc_link->dc; |
| |
| encoder = amdgpu_dm_connector_to_encoder(connector); |
| |
| if (!drm_edid_is_valid(edid)) { |
| amdgpu_dm_connector->num_modes = |
| drm_add_modes_noedid(connector, 640, 480); |
| if (dc->link_srv->dp_get_encoding_format(verified_link_cap) == DP_128b_132b_ENCODING) |
| amdgpu_dm_connector->num_modes += |
| drm_add_modes_noedid(connector, 1920, 1080); |
| } else { |
| amdgpu_dm_connector_ddc_get_modes(connector, edid); |
| if (encoder) |
| amdgpu_dm_connector_add_common_modes(encoder, connector); |
| amdgpu_dm_connector_add_freesync_modes(connector, edid); |
| } |
| amdgpu_dm_fbc_init(connector); |
| |
| return amdgpu_dm_connector->num_modes; |
| } |
| |
| static const u32 supported_colorspaces = |
| BIT(DRM_MODE_COLORIMETRY_BT709_YCC) | |
| BIT(DRM_MODE_COLORIMETRY_OPRGB) | |
| BIT(DRM_MODE_COLORIMETRY_BT2020_RGB) | |
| BIT(DRM_MODE_COLORIMETRY_BT2020_YCC); |
| |
| void amdgpu_dm_connector_init_helper(struct amdgpu_display_manager *dm, |
| struct amdgpu_dm_connector *aconnector, |
| int connector_type, |
| struct dc_link *link, |
| int link_index) |
| { |
| struct amdgpu_device *adev = drm_to_adev(dm->ddev); |
| |
| /* |
| * Some of the properties below require access to state, like bpc. |
| * Allocate some default initial connector state with our reset helper. |
| */ |
| if (aconnector->base.funcs->reset) |
| aconnector->base.funcs->reset(&aconnector->base); |
| |
| aconnector->connector_id = link_index; |
| aconnector->bl_idx = -1; |
| aconnector->dc_link = link; |
| aconnector->base.interlace_allowed = false; |
| aconnector->base.doublescan_allowed = false; |
| aconnector->base.stereo_allowed = false; |
| aconnector->base.dpms = DRM_MODE_DPMS_OFF; |
| aconnector->hpd.hpd = AMDGPU_HPD_NONE; /* not used */ |
| aconnector->audio_inst = -1; |
| aconnector->pack_sdp_v1_3 = false; |
| aconnector->as_type = ADAPTIVE_SYNC_TYPE_NONE; |
| memset(&aconnector->vsdb_info, 0, sizeof(aconnector->vsdb_info)); |
| mutex_init(&aconnector->hpd_lock); |
| mutex_init(&aconnector->handle_mst_msg_ready); |
| |
| /* |
| * configure support HPD hot plug connector_>polled default value is 0 |
| * which means HPD hot plug not supported |
| */ |
| switch (connector_type) { |
| case DRM_MODE_CONNECTOR_HDMIA: |
| aconnector->base.polled = DRM_CONNECTOR_POLL_HPD; |
| aconnector->base.ycbcr_420_allowed = |
| link->link_enc->features.hdmi_ycbcr420_supported ? true : false; |
| break; |
| case DRM_MODE_CONNECTOR_DisplayPort: |
| aconnector->base.polled = DRM_CONNECTOR_POLL_HPD; |
| link->link_enc = link_enc_cfg_get_link_enc(link); |
| ASSERT(link->link_enc); |
| if (link->link_enc) |
| aconnector->base.ycbcr_420_allowed = |
| link->link_enc->features.dp_ycbcr420_supported ? true : false; |
| break; |
| case DRM_MODE_CONNECTOR_DVID: |
| aconnector->base.polled = DRM_CONNECTOR_POLL_HPD; |
| break; |
| default: |
| break; |
| } |
| |
| drm_object_attach_property(&aconnector->base.base, |
| dm->ddev->mode_config.scaling_mode_property, |
| DRM_MODE_SCALE_NONE); |
| |
| drm_object_attach_property(&aconnector->base.base, |
| adev->mode_info.underscan_property, |
| UNDERSCAN_OFF); |
| drm_object_attach_property(&aconnector->base.base, |
| adev->mode_info.underscan_hborder_property, |
| 0); |
| drm_object_attach_property(&aconnector->base.base, |
| adev->mode_info.underscan_vborder_property, |
| 0); |
| |
| if (!aconnector->mst_root) |
| drm_connector_attach_max_bpc_property(&aconnector->base, 8, 16); |
| |
| aconnector->base.state->max_bpc = 16; |
| aconnector->base.state->max_requested_bpc = aconnector->base.state->max_bpc; |
| |
| if (connector_type == DRM_MODE_CONNECTOR_HDMIA) { |
| /* Content Type is currently only implemented for HDMI. */ |
| drm_connector_attach_content_type_property(&aconnector->base); |
| } |
| |
| if (connector_type == DRM_MODE_CONNECTOR_HDMIA) { |
| if (!drm_mode_create_hdmi_colorspace_property(&aconnector->base, supported_colorspaces)) |
| drm_connector_attach_colorspace_property(&aconnector->base); |
| } else if ((connector_type == DRM_MODE_CONNECTOR_DisplayPort && !aconnector->mst_root) || |
| connector_type == DRM_MODE_CONNECTOR_eDP) { |
| if (!drm_mode_create_dp_colorspace_property(&aconnector->base, supported_colorspaces)) |
| drm_connector_attach_colorspace_property(&aconnector->base); |
| } |
| |
| if (connector_type == DRM_MODE_CONNECTOR_HDMIA || |
| connector_type == DRM_MODE_CONNECTOR_DisplayPort || |
| connector_type == DRM_MODE_CONNECTOR_eDP) { |
| drm_connector_attach_hdr_output_metadata_property(&aconnector->base); |
| |
| if (!aconnector->mst_root) |
| drm_connector_attach_vrr_capable_property(&aconnector->base); |
| |
| if (adev->dm.hdcp_workqueue) |
| drm_connector_attach_content_protection_property(&aconnector->base, true); |
| } |
| } |
| |
| static int amdgpu_dm_i2c_xfer(struct i2c_adapter *i2c_adap, |
| struct i2c_msg *msgs, int num) |
| { |
| struct amdgpu_i2c_adapter *i2c = i2c_get_adapdata(i2c_adap); |
| struct ddc_service *ddc_service = i2c->ddc_service; |
| struct i2c_command cmd; |
| int i; |
| int result = -EIO; |
| |
| if (!ddc_service->ddc_pin || !ddc_service->ddc_pin->hw_info.hw_supported) |
| return result; |
| |
| cmd.payloads = kcalloc(num, sizeof(struct i2c_payload), GFP_KERNEL); |
| |
| if (!cmd.payloads) |
| return result; |
| |
| cmd.number_of_payloads = num; |
| cmd.engine = I2C_COMMAND_ENGINE_DEFAULT; |
| cmd.speed = 100; |
| |
| for (i = 0; i < num; i++) { |
| cmd.payloads[i].write = !(msgs[i].flags & I2C_M_RD); |
| cmd.payloads[i].address = msgs[i].addr; |
| cmd.payloads[i].length = msgs[i].len; |
| cmd.payloads[i].data = msgs[i].buf; |
| } |
| |
| if (dc_submit_i2c( |
| ddc_service->ctx->dc, |
| ddc_service->link->link_index, |
| &cmd)) |
| result = num; |
| |
| kfree(cmd.payloads); |
| return result; |
| } |
| |
| static u32 amdgpu_dm_i2c_func(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; |
| } |
| |
| static const struct i2c_algorithm amdgpu_dm_i2c_algo = { |
| .master_xfer = amdgpu_dm_i2c_xfer, |
| .functionality = amdgpu_dm_i2c_func, |
| }; |
| |
| static struct amdgpu_i2c_adapter * |
| create_i2c(struct ddc_service *ddc_service, |
| int link_index, |
| int *res) |
| { |
| struct amdgpu_device *adev = ddc_service->ctx->driver_context; |
| struct amdgpu_i2c_adapter *i2c; |
| |
| i2c = kzalloc(sizeof(struct amdgpu_i2c_adapter), GFP_KERNEL); |
| if (!i2c) |
| return NULL; |
| i2c->base.owner = THIS_MODULE; |
| i2c->base.dev.parent = &adev->pdev->dev; |
| i2c->base.algo = &amdgpu_dm_i2c_algo; |
| snprintf(i2c->base.name, sizeof(i2c->base.name), "AMDGPU DM i2c hw bus %d", link_index); |
| i2c_set_adapdata(&i2c->base, i2c); |
| i2c->ddc_service = ddc_service; |
| |
| return i2c; |
| } |
| |
| |
| /* |
| * Note: this function assumes that dc_link_detect() was called for the |
| * dc_link which will be represented by this aconnector. |
| */ |
| static int amdgpu_dm_connector_init(struct amdgpu_display_manager *dm, |
| struct amdgpu_dm_connector *aconnector, |
| u32 link_index, |
| struct amdgpu_encoder *aencoder) |
| { |
| int res = 0; |
| int connector_type; |
| struct dc *dc = dm->dc; |
| struct dc_link *link = dc_get_link_at_index(dc, link_index); |
| struct amdgpu_i2c_adapter *i2c; |
| |
| /* Not needed for writeback connector */ |
| link->priv = aconnector; |
| |
| |
| i2c = create_i2c(link->ddc, link->link_index, &res); |
| if (!i2c) { |
| DRM_ERROR("Failed to create i2c adapter data\n"); |
| return -ENOMEM; |
| } |
| |
| aconnector->i2c = i2c; |
| res = i2c_add_adapter(&i2c->base); |
| |
| if (res) { |
| DRM_ERROR("Failed to register hw i2c %d\n", link->link_index); |
| goto out_free; |
| } |
| |
| connector_type = to_drm_connector_type(link->connector_signal); |
| |
| res = drm_connector_init_with_ddc( |
| dm->ddev, |
| &aconnector->base, |
| &amdgpu_dm_connector_funcs, |
| connector_type, |
| &i2c->base); |
| |
| if (res) { |
| DRM_ERROR("connector_init failed\n"); |
| aconnector->connector_id = -1; |
| goto out_free; |
| } |
| |
| drm_connector_helper_add( |
| &aconnector->base, |
| &amdgpu_dm_connector_helper_funcs); |
| |
| amdgpu_dm_connector_init_helper( |
| dm, |
| aconnector, |
| connector_type, |
| link, |
| link_index); |
| |
| drm_connector_attach_encoder( |
| &aconnector->base, &aencoder->base); |
| |
| if (connector_type == DRM_MODE_CONNECTOR_DisplayPort |
| || connector_type == DRM_MODE_CONNECTOR_eDP) |
| amdgpu_dm_initialize_dp_connector(dm, aconnector, link->link_index); |
| |
| out_free: |
| if (res) { |
| kfree(i2c); |
| aconnector->i2c = NULL; |
| } |
| return res; |
| } |
| |
| int amdgpu_dm_get_encoder_crtc_mask(struct amdgpu_device *adev) |
| { |
| switch (adev->mode_info.num_crtc) { |
| case 1: |
| return 0x1; |
| case 2: |
| return 0x3; |
| case 3: |
| return 0x7; |
| case 4: |
| return 0xf; |
| case 5: |
| return 0x1f; |
| case 6: |
| default: |
| return 0x3f; |
| } |
| } |
| |
| static int amdgpu_dm_encoder_init(struct drm_device *dev, |
| struct amdgpu_encoder *aencoder, |
| uint32_t link_index) |
| { |
| struct amdgpu_device *adev = drm_to_adev(dev); |
| |
| int res = drm_encoder_init(dev, |
| &aencoder->base, |
| &amdgpu_dm_encoder_funcs, |
| DRM_MODE_ENCODER_TMDS, |
| NULL); |
| |
| aencoder->base.possible_crtcs = amdgpu_dm_get_encoder_crtc_mask(adev); |
| |
| if (!res) |
| aencoder->encoder_id = link_index; |
| else |
| aencoder->encoder_id = -1; |
| |
| drm_encoder_helper_add(&aencoder->base, &amdgpu_dm_encoder_helper_funcs); |
| |
| return res; |
| } |
| |
| static void manage_dm_interrupts(struct amdgpu_device *adev, |
| struct amdgpu_crtc *acrtc, |
| bool enable) |
| { |
| /* |
| * We have no guarantee that the frontend index maps to the same |
| * backend index - some even map to more than one. |
| * |
| * TODO: Use a different interrupt or check DC itself for the mapping. |
| */ |
| int irq_type = |
| amdgpu_display_crtc_idx_to_irq_type( |
| adev, |
| acrtc->crtc_id); |
| |
| if (enable) { |
| drm_crtc_vblank_on(&acrtc->base); |
| amdgpu_irq_get( |
| adev, |
| &adev->pageflip_irq, |
| irq_type); |
| #if defined(CONFIG_DRM_AMD_SECURE_DISPLAY) |
| amdgpu_irq_get( |
| adev, |
| &adev->vline0_irq, |
| irq_type); |
| #endif |
| } else { |
| #if defined(CONFIG_DRM_AMD_SECURE_DISPLAY) |
| amdgpu_irq_put( |
| adev, |
| &adev->vline0_irq, |
| irq_type); |
| #endif |
| amdgpu_irq_put( |
| adev, |
| &adev->pageflip_irq, |
| irq_type); |
| drm_crtc_vblank_off(&acrtc->base); |
| } |
| } |
| |
| static void dm_update_pflip_irq_state(struct amdgpu_device *adev, |
| struct amdgpu_crtc *acrtc) |
| { |
| int irq_type = |
| amdgpu_display_crtc_idx_to_irq_type(adev, acrtc->crtc_id); |
| |
| /** |
| * This reads the current state for the IRQ and force reapplies |
| * the setting to hardware. |
| */ |
| amdgpu_irq_update(adev, &adev->pageflip_irq, irq_type); |
| } |
| |
| static bool |
| is_scaling_state_different(const struct dm_connector_state *dm_state, |
| const struct dm_connector_state *old_dm_state) |
| { |
| if (dm_state->scaling != old_dm_state->scaling) |
| return true; |
| if (!dm_state->underscan_enable && old_dm_state->underscan_enable) { |
| if (old_dm_state->underscan_hborder != 0 && old_dm_state->underscan_vborder != 0) |
| return true; |
| } else if (dm_state->underscan_enable && !old_dm_state->underscan_enable) { |
| if (dm_state->underscan_hborder != 0 && dm_state->underscan_vborder != 0) |
| return true; |
| } else if (dm_state->underscan_hborder != old_dm_state->underscan_hborder || |
| dm_state->underscan_vborder != old_dm_state->underscan_vborder) |
| return true; |
| return false; |
| } |
| |
| static bool is_content_protection_different(struct drm_crtc_state *new_crtc_state, |
| struct drm_crtc_state *old_crtc_state, |
| struct drm_connector_state *new_conn_state, |
| struct drm_connector_state *old_conn_state, |
| const struct drm_connector *connector, |
| struct hdcp_workqueue *hdcp_w) |
| { |
| struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector); |
| struct dm_connector_state *dm_con_state = to_dm_connector_state(connector->state); |
| |
| pr_debug("[HDCP_DM] connector->index: %x connect_status: %x dpms: %x\n", |
| connector->index, connector->status, connector->dpms); |
| pr_debug("[HDCP_DM] state protection old: %x new: %x\n", |
| old_conn_state->content_protection, new_conn_state->content_protection); |
| |
| if (old_crtc_state) |
| pr_debug("[HDCP_DM] old crtc en: %x a: %x m: %x a-chg: %x c-chg: %x\n", |
| old_crtc_state->enable, |
| old_crtc_state->active, |
| old_crtc_state->mode_changed, |
| old_crtc_state->active_changed, |
| old_crtc_state->connectors_changed); |
| |
| if (new_crtc_state) |
| pr_debug("[HDCP_DM] NEW crtc en: %x a: %x m: %x a-chg: %x c-chg: %x\n", |
| new_crtc_state->enable, |
| new_crtc_state->active, |
| new_crtc_state->mode_changed, |
| new_crtc_state->active_changed, |
| new_crtc_state->connectors_changed); |
| |
| /* hdcp content type change */ |
| if (old_conn_state->hdcp_content_type != new_conn_state->hdcp_content_type && |
| new_conn_state->content_protection != DRM_MODE_CONTENT_PROTECTION_UNDESIRED) { |
| new_conn_state->content_protection = DRM_MODE_CONTENT_PROTECTION_DESIRED; |
| pr_debug("[HDCP_DM] Type0/1 change %s :true\n", __func__); |
| return true; |
| } |
| |
| /* CP is being re enabled, ignore this */ |
| if (old_conn_state->content_protection == DRM_MODE_CONTENT_PROTECTION_ENABLED && |
| new_conn_state->content_protection == DRM_MODE_CONTENT_PROTECTION_DESIRED) { |
| if (new_crtc_state && new_crtc_state->mode_changed) { |
| new_conn_state->content_protection = DRM_MODE_CONTENT_PROTECTION_DESIRED; |
| pr_debug("[HDCP_DM] ENABLED->DESIRED & mode_changed %s :true\n", __func__); |
| return true; |
| } |
| new_conn_state->content_protection = DRM_MODE_CONTENT_PROTECTION_ENABLED; |
| pr_debug("[HDCP_DM] ENABLED -> DESIRED %s :false\n", __func__); |
| return false; |
| } |
| |
| /* S3 resume case, since old state will always be 0 (UNDESIRED) and the restored state will be ENABLED |
| * |
| * Handles: UNDESIRED -> ENABLED |
| */ |
| if (old_conn_state->content_protection == DRM_MODE_CONTENT_PROTECTION_UNDESIRED && |
| new_conn_state->content_protection == DRM_MODE_CONTENT_PROTECTION_ENABLED) |
| new_conn_state->content_protection = DRM_MODE_CONTENT_PROTECTION_DESIRED; |
| |
| /* Stream removed and re-enabled |
| * |
| * Can sometimes overlap with the HPD case, |
| * thus set update_hdcp to false to avoid |
| * setting HDCP multiple times. |
| * |
| * Handles: DESIRED -> DESIRED (Special case) |
| */ |
| if (!(old_conn_state->crtc && old_conn_state->crtc->enabled) && |
| new_conn_state->crtc && new_conn_state->crtc->enabled && |
| connector->state->content_protection == DRM_MODE_CONTENT_PROTECTION_DESIRED) { |
| dm_con_state->update_hdcp = false; |
| pr_debug("[HDCP_DM] DESIRED->DESIRED (Stream removed and re-enabled) %s :true\n", |
| __func__); |
| return true; |
| } |
| |
| /* Hot-plug, headless s3, dpms |
| * |
| * Only start HDCP if the display is connected/enabled. |
| * update_hdcp flag will be set to false until the next |
| * HPD comes in. |
| * |
| * Handles: DESIRED -> DESIRED (Special case) |
| */ |
| if (dm_con_state->update_hdcp && |
| new_conn_state->content_protection == DRM_MODE_CONTENT_PROTECTION_DESIRED && |
| connector->dpms == DRM_MODE_DPMS_ON && aconnector->dc_sink != NULL) { |
| dm_con_state->update_hdcp = false; |
| pr_debug("[HDCP_DM] DESIRED->DESIRED (Hot-plug, headless s3, dpms) %s :true\n", |
| __func__); |
| return true; |
| } |
| |
| if (old_conn_state->content_protection == new_conn_state->content_protection) { |
| if (new_conn_state->content_protection >= DRM_MODE_CONTENT_PROTECTION_DESIRED) { |
| if (new_crtc_state && new_crtc_state->mode_changed) { |
| pr_debug("[HDCP_DM] DESIRED->DESIRED or ENABLE->ENABLE mode_change %s :true\n", |
| __func__); |
| return true; |
| } |
| pr_debug("[HDCP_DM] DESIRED->DESIRED & ENABLE->ENABLE %s :false\n", |
| __func__); |
| return false; |
| } |
| |
| pr_debug("[HDCP_DM] UNDESIRED->UNDESIRED %s :false\n", __func__); |
| return false; |
| } |
| |
| if (new_conn_state->content_protection != DRM_MODE_CONTENT_PROTECTION_ENABLED) { |
| pr_debug("[HDCP_DM] UNDESIRED->DESIRED or DESIRED->UNDESIRED or ENABLED->UNDESIRED %s :true\n", |
| __func__); |
| return true; |
| } |
| |
| pr_debug("[HDCP_DM] DESIRED->ENABLED %s :false\n", __func__); |
| return false; |
| } |
| |
| static void remove_stream(struct amdgpu_device *adev, |
| struct amdgpu_crtc *acrtc, |
| struct dc_stream_state *stream) |
| { |
| /* this is the update mode case */ |
| |
| acrtc->otg_inst = -1; |
| acrtc->enabled = false; |
| } |
| |
| static void prepare_flip_isr(struct amdgpu_crtc *acrtc) |
| { |
| |
| assert_spin_locked(&acrtc->base.dev->event_lock); |
| WARN_ON(acrtc->event); |
| |
| acrtc->event = acrtc->base.state->event; |
| |
| /* Set the flip status */ |
| acrtc->pflip_status = AMDGPU_FLIP_SUBMITTED; |
| |
| /* Mark this event as consumed */ |
| acrtc->base.state->event = NULL; |
| |
| drm_dbg_state(acrtc->base.dev, |
| "crtc:%d, pflip_stat:AMDGPU_FLIP_SUBMITTED\n", |
| acrtc->crtc_id); |
| } |
| |
| static void update_freesync_state_on_stream( |
| struct amdgpu_display_manager *dm, |
| struct dm_crtc_state *new_crtc_state, |
| struct dc_stream_state *new_stream, |
| struct dc_plane_state *surface, |
| u32 flip_timestamp_in_us) |
| { |
| struct mod_vrr_params vrr_params; |
| struct dc_info_packet vrr_infopacket = {0}; |
| struct amdgpu_device *adev = dm->adev; |
| struct amdgpu_crtc *acrtc = to_amdgpu_crtc(new_crtc_state->base.crtc); |
| unsigned long flags; |
| bool pack_sdp_v1_3 = false; |
| struct amdgpu_dm_connector *aconn; |
| enum vrr_packet_type packet_type = PACKET_TYPE_VRR; |
| |
| if (!new_stream) |
| return; |
| |
| /* |
| * TODO: Determine why min/max totals and vrefresh can be 0 here. |
| * For now it's sufficient to just guard against these conditions. |
| */ |
| |
| if (!new_stream->timing.h_total || !new_stream->timing.v_total) |
| return; |
| |
| spin_lock_irqsave(&adev_to_drm(adev)->event_lock, flags); |
| vrr_params = acrtc->dm_irq_params.vrr_params; |
| |
| if (surface) { |
| mod_freesync_handle_preflip( |
| dm->freesync_module, |
| surface, |
| new_stream, |
| flip_timestamp_in_us, |
| &vrr_params); |
| |
| if (adev->family < AMDGPU_FAMILY_AI && |
| amdgpu_dm_crtc_vrr_active(new_crtc_state)) { |
| mod_freesync_handle_v_update(dm->freesync_module, |
| new_stream, &vrr_params); |
| |
| /* Need to call this before the frame ends. */ |
| dc_stream_adjust_vmin_vmax(dm->dc, |
| new_crtc_state->stream, |
| &vrr_params.adjust); |
| } |
| } |
| |
| aconn = (struct amdgpu_dm_connector *)new_stream->dm_stream_context; |
| |
| if (aconn && (aconn->as_type == FREESYNC_TYPE_PCON_IN_WHITELIST || aconn->vsdb_info.replay_mode)) { |
| pack_sdp_v1_3 = aconn->pack_sdp_v1_3; |
| |
| if (aconn->vsdb_info.amd_vsdb_version == 1) |
| packet_type = PACKET_TYPE_FS_V1; |
| else if (aconn->vsdb_info.amd_vsdb_version == 2) |
| packet_type = PACKET_TYPE_FS_V2; |
| else if (aconn->vsdb_info.amd_vsdb_version == 3) |
| packet_type = PACKET_TYPE_FS_V3; |
| |
| mod_build_adaptive_sync_infopacket(new_stream, aconn->as_type, NULL, |
| &new_stream->adaptive_sync_infopacket); |
| } |
| |
| mod_freesync_build_vrr_infopacket( |
| dm->freesync_module, |
| new_stream, |
| &vrr_params, |
| packet_type, |
| TRANSFER_FUNC_UNKNOWN, |
| &vrr_infopacket, |
| pack_sdp_v1_3); |
| |
| new_crtc_state->freesync_vrr_info_changed |= |
| (memcmp(&new_crtc_state->vrr_infopacket, |
| &vrr_infopacket, |
| sizeof(vrr_infopacket)) != 0); |
| |
| acrtc->dm_irq_params.vrr_params = vrr_params; |
| new_crtc_state->vrr_infopacket = vrr_infopacket; |
| |
| new_stream->vrr_infopacket = vrr_infopacket; |
| new_stream->allow_freesync = mod_freesync_get_freesync_enabled(&vrr_params); |
| |
| if (new_crtc_state->freesync_vrr_info_changed) |
| DRM_DEBUG_KMS("VRR packet update: crtc=%u enabled=%d state=%d", |
| new_crtc_state->base.crtc->base.id, |
| (int)new_crtc_state->base.vrr_enabled, |
| (int)vrr_params.state); |
| |
| spin_unlock_irqrestore(&adev_to_drm(adev)->event_lock, flags); |
| } |
| |
| static void update_stream_irq_parameters( |
| struct amdgpu_display_manager *dm, |
| struct dm_crtc_state *new_crtc_state) |
| { |
| struct dc_stream_state *new_stream = new_crtc_state->stream; |
| struct mod_vrr_params vrr_params; |
| struct mod_freesync_config config = new_crtc_state->freesync_config; |
| struct amdgpu_device *adev = dm->adev; |
| struct amdgpu_crtc *acrtc = to_amdgpu_crtc(new_crtc_state->base.crtc); |
| unsigned long flags; |
| |
| if (!new_stream) |
| return; |
| |
| /* |
| * TODO: Determine why min/max totals and vrefresh can be 0 here. |
| * For now it's sufficient to just guard against these conditions. |
| */ |
| if (!new_stream->timing.h_total || !new_stream->timing.v_total) |
| return; |
| |
| spin_lock_irqsave(&adev_to_drm(adev)->event_lock, flags); |
| vrr_params = acrtc->dm_irq_params.vrr_params; |
| |
| if (new_crtc_state->vrr_supported && |
| config.min_refresh_in_uhz && |
| config.max_refresh_in_uhz) { |
| /* |
| * if freesync compatible mode was set, config.state will be set |
| * in atomic check |
| */ |
| if (config.state == VRR_STATE_ACTIVE_FIXED && config.fixed_refresh_in_uhz && |
| (!drm_atomic_crtc_needs_modeset(&new_crtc_state->base) || |
| new_crtc_state->freesync_config.state == VRR_STATE_ACTIVE_FIXED)) { |
| vrr_params.max_refresh_in_uhz = config.max_refresh_in_uhz; |
| vrr_params.min_refresh_in_uhz = config.min_refresh_in_uhz; |
| vrr_params.fixed_refresh_in_uhz = config.fixed_refresh_in_uhz; |
| vrr_params.state = VRR_STATE_ACTIVE_FIXED; |
| } else { |
| config.state = new_crtc_state->base.vrr_enabled ? |
| VRR_STATE_ACTIVE_VARIABLE : |
| VRR_STATE_INACTIVE; |
| } |
| } else { |
| config.state = VRR_STATE_UNSUPPORTED; |
| } |
| |
| mod_freesync_build_vrr_params(dm->freesync_module, |
| new_stream, |
| &config, &vrr_params); |
| |
| new_crtc_state->freesync_config = config; |
| /* Copy state for access from DM IRQ handler */ |
| acrtc->dm_irq_params.freesync_config = config; |
| acrtc->dm_irq_params.active_planes = new_crtc_state->active_planes; |
| acrtc->dm_irq_params.vrr_params = vrr_params; |
| spin_unlock_irqrestore(&adev_to_drm(adev)->event_lock, flags); |
| } |
| |
| static void amdgpu_dm_handle_vrr_transition(struct dm_crtc_state *old_state, |
| struct dm_crtc_state *new_state) |
| { |
| bool old_vrr_active = amdgpu_dm_crtc_vrr_active(old_state); |
| bool new_vrr_active = amdgpu_dm_crtc_vrr_active(new_state); |
| |
| if (!old_vrr_active && new_vrr_active) { |
| /* Transition VRR inactive -> active: |
| * While VRR is active, we must not disable vblank irq, as a |
| * reenable after disable would compute bogus vblank/pflip |
| * timestamps if it likely happened inside display front-porch. |
| * |
| * We also need vupdate irq for the actual core vblank handling |
| * at end of vblank. |
| */ |
| WARN_ON(amdgpu_dm_crtc_set_vupdate_irq(new_state->base.crtc, true) != 0); |
| WARN_ON(drm_crtc_vblank_get(new_state->base.crtc) != 0); |
| DRM_DEBUG_DRIVER("%s: crtc=%u VRR off->on: Get vblank ref\n", |
| __func__, new_state->base.crtc->base.id); |
| } else if (old_vrr_active && !new_vrr_active) { |
| /* Transition VRR active -> inactive: |
| * Allow vblank irq disable again for fixed refresh rate. |
| */ |
| WARN_ON(amdgpu_dm_crtc_set_vupdate_irq(new_state->base.crtc, false) != 0); |
| drm_crtc_vblank_put(new_state->base.crtc); |
| DRM_DEBUG_DRIVER("%s: crtc=%u VRR on->off: Drop vblank ref\n", |
| __func__, new_state->base.crtc->base.id); |
| } |
| } |
| |
| static void amdgpu_dm_commit_cursors(struct drm_atomic_state *state) |
| { |
| struct drm_plane *plane; |
| struct drm_plane_state *old_plane_state; |
| int i; |
| |
| /* |
| * TODO: Make this per-stream so we don't issue redundant updates for |
| * commits with multiple streams. |
| */ |
| for_each_old_plane_in_state(state, plane, old_plane_state, i) |
| if (plane->type == DRM_PLANE_TYPE_CURSOR) |
| amdgpu_dm_plane_handle_cursor_update(plane, old_plane_state); |
| } |
| |
| static inline uint32_t get_mem_type(struct drm_framebuffer *fb) |
| { |
| struct amdgpu_bo *abo = gem_to_amdgpu_bo(fb->obj[0]); |
| |
| return abo->tbo.resource ? abo->tbo.resource->mem_type : 0; |
| } |
| |
| static void amdgpu_dm_update_cursor(struct drm_plane *plane, |
| struct drm_plane_state *old_plane_state, |
| struct dc_stream_update *update) |
| { |
| struct amdgpu_device *adev = drm_to_adev(plane->dev); |
| struct amdgpu_framebuffer *afb = to_amdgpu_framebuffer(plane->state->fb); |
| struct drm_crtc *crtc = afb ? plane->state->crtc : old_plane_state->crtc; |
| struct dm_crtc_state *crtc_state = crtc ? to_dm_crtc_state(crtc->state) : NULL; |
| struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc); |
| uint64_t address = afb ? afb->address : 0; |
| struct dc_cursor_position position = {0}; |
| struct dc_cursor_attributes attributes; |
| int ret; |
| |
| if (!plane->state->fb && !old_plane_state->fb) |
| return; |
| |
| drm_dbg_atomic(plane->dev, "crtc_id=%d with size %d to %d\n", |
| amdgpu_crtc->crtc_id, plane->state->crtc_w, |
| plane->state->crtc_h); |
| |
| ret = amdgpu_dm_plane_get_cursor_position(plane, crtc, &position); |
| if (ret) |
| return; |
| |
| if (!position.enable) { |
| /* turn off cursor */ |
| if (crtc_state && crtc_state->stream) { |
| dc_stream_set_cursor_position(crtc_state->stream, |
| &position); |
| update->cursor_position = &crtc_state->stream->cursor_position; |
| } |
| return; |
| } |
| |
| amdgpu_crtc->cursor_width = plane->state->crtc_w; |
| amdgpu_crtc->cursor_height = plane->state->crtc_h; |
| |
| memset(&attributes, 0, sizeof(attributes)); |
| attributes.address.high_part = upper_32_bits(address); |
| attributes.address.low_part = lower_32_bits(address); |
| attributes.width = plane->state->crtc_w; |
| attributes.height = plane->state->crtc_h; |
| attributes.color_format = CURSOR_MODE_COLOR_PRE_MULTIPLIED_ALPHA; |
| attributes.rotation_angle = 0; |
| attributes.attribute_flags.value = 0; |
| |
| /* Enable cursor degamma ROM on DCN3+ for implicit sRGB degamma in DRM |
| * legacy gamma setup. |
| */ |
| if (crtc_state->cm_is_degamma_srgb && |
| adev->dm.dc->caps.color.dpp.gamma_corr) |
| attributes.attribute_flags.bits.ENABLE_CURSOR_DEGAMMA = 1; |
| |
| attributes.pitch = afb->base.pitches[0] / afb->base.format->cpp[0]; |
| |
| if (crtc_state->stream) { |
| if (!dc_stream_set_cursor_attributes(crtc_state->stream, |
| &attributes)) |
| DRM_ERROR("DC failed to set cursor attributes\n"); |
| |
| update->cursor_attributes = &crtc_state->stream->cursor_attributes; |
| |
| if (!dc_stream_set_cursor_position(crtc_state->stream, |
| &position)) |
| DRM_ERROR("DC failed to set cursor position\n"); |
| |
| update->cursor_position = &crtc_state->stream->cursor_position; |
| } |
| } |
| |
| static void amdgpu_dm_commit_planes(struct drm_atomic_state *state, |
| struct drm_device *dev, |
| struct amdgpu_display_manager *dm, |
| struct drm_crtc *pcrtc, |
| bool wait_for_vblank) |
| { |
| u32 i; |
| u64 timestamp_ns = ktime_get_ns(); |
| struct drm_plane *plane; |
| struct drm_plane_state *old_plane_state, *new_plane_state; |
| struct amdgpu_crtc *acrtc_attach = to_amdgpu_crtc(pcrtc); |
| struct drm_crtc_state *new_pcrtc_state = |
| drm_atomic_get_new_crtc_state(state, pcrtc); |
| struct dm_crtc_state *acrtc_state = to_dm_crtc_state(new_pcrtc_state); |
| struct dm_crtc_state *dm_old_crtc_state = |
| to_dm_crtc_state(drm_atomic_get_old_crtc_state(state, pcrtc)); |
| int planes_count = 0, vpos, hpos; |
| unsigned long flags; |
| u32 target_vblank, last_flip_vblank; |
| bool vrr_active = amdgpu_dm_crtc_vrr_active(acrtc_state); |
| bool cursor_update = false; |
| bool pflip_present = false; |
| bool dirty_rects_changed = false; |
| bool updated_planes_and_streams = false; |
| struct { |
| struct dc_surface_update surface_updates[MAX_SURFACES]; |
| struct dc_plane_info plane_infos[MAX_SURFACES]; |
| struct dc_scaling_info scaling_infos[MAX_SURFACES]; |
| struct dc_flip_addrs flip_addrs[MAX_SURFACES]; |
| struct dc_stream_update stream_update; |
| } *bundle; |
| |
| bundle = kzalloc(sizeof(*bundle), GFP_KERNEL); |
| |
| if (!bundle) { |
| drm_err(dev, "Failed to allocate update bundle\n"); |
| goto cleanup; |
| } |
| |
| /* |
| * Disable the cursor first if we're disabling all the planes. |
| * It'll remain on the screen after the planes are re-enabled |
| * if we don't. |
| * |
| * If the cursor is transitioning from native to overlay mode, the |
| * native cursor needs to be disabled first. |
| */ |
| if (acrtc_state->cursor_mode == DM_CURSOR_OVERLAY_MODE && |
| dm_old_crtc_state->cursor_mode == DM_CURSOR_NATIVE_MODE) { |
| struct dc_cursor_position cursor_position = {0}; |
| |
| if (!dc_stream_set_cursor_position(acrtc_state->stream, |
| &cursor_position)) |
| drm_err(dev, "DC failed to disable native cursor\n"); |
| |
| bundle->stream_update.cursor_position = |
| &acrtc_state->stream->cursor_position; |
| } |
| |
| if (acrtc_state->active_planes == 0 && |
| dm_old_crtc_state->cursor_mode == DM_CURSOR_NATIVE_MODE) |
| amdgpu_dm_commit_cursors(state); |
| |
| /* update planes when needed */ |
| for_each_oldnew_plane_in_state(state, plane, old_plane_state, new_plane_state, i) { |
| struct drm_crtc *crtc = new_plane_state->crtc; |
| struct drm_crtc_state *new_crtc_state; |
| struct drm_framebuffer *fb = new_plane_state->fb; |
| struct amdgpu_framebuffer *afb = (struct amdgpu_framebuffer *)fb; |
| bool plane_needs_flip; |
| struct dc_plane_state *dc_plane; |
| struct dm_plane_state *dm_new_plane_state = to_dm_plane_state(new_plane_state); |
| |
| /* Cursor plane is handled after stream updates */ |
| if (plane->type == DRM_PLANE_TYPE_CURSOR && |
| acrtc_state->cursor_mode == DM_CURSOR_NATIVE_MODE) { |
| if ((fb && crtc == pcrtc) || |
| (old_plane_state->fb && old_plane_state->crtc == pcrtc)) { |
| cursor_update = true; |
| if (amdgpu_ip_version(dm->adev, DCE_HWIP, 0) != 0) |
| amdgpu_dm_update_cursor(plane, old_plane_state, &bundle->stream_update); |
| } |
| |
| continue; |
| } |
| |
| if (!fb || !crtc || pcrtc != crtc) |
| continue; |
| |
| new_crtc_state = drm_atomic_get_new_crtc_state(state, crtc); |
| if (!new_crtc_state->active) |
| continue; |
| |
| dc_plane = dm_new_plane_state->dc_state; |
| if (!dc_plane) |
| continue; |
| |
| bundle->surface_updates[planes_count].surface = dc_plane; |
| if (new_pcrtc_state->color_mgmt_changed) { |
| bundle->surface_updates[planes_count].gamma = &dc_plane->gamma_correction; |
| bundle->surface_updates[planes_count].in_transfer_func = &dc_plane->in_transfer_func; |
| bundle->surface_updates[planes_count].gamut_remap_matrix = &dc_plane->gamut_remap_matrix; |
| bundle->surface_updates[planes_count].hdr_mult = dc_plane->hdr_mult; |
| bundle->surface_updates[planes_count].func_shaper = &dc_plane->in_shaper_func; |
| bundle->surface_updates[planes_count].lut3d_func = &dc_plane->lut3d_func; |
| bundle->surface_updates[planes_count].blend_tf = &dc_plane->blend_tf; |
| } |
| |
| amdgpu_dm_plane_fill_dc_scaling_info(dm->adev, new_plane_state, |
| &bundle->scaling_infos[planes_count]); |
| |
| bundle->surface_updates[planes_count].scaling_info = |
| &bundle->scaling_infos[planes_count]; |
| |
| plane_needs_flip = old_plane_state->fb && new_plane_state->fb; |
| |
| pflip_present = pflip_present || plane_needs_flip; |
| |
| if (!plane_needs_flip) { |
| planes_count += 1; |
| continue; |
| } |
| |
| fill_dc_plane_info_and_addr( |
| dm->adev, new_plane_state, |
| afb->tiling_flags, |
| &bundle->plane_infos[planes_count], |
| &bundle->flip_addrs[planes_count].address, |
| afb->tmz_surface, false); |
| |
| drm_dbg_state(state->dev, "plane: id=%d dcc_en=%d\n", |
| new_plane_state->plane->index, |
| bundle->plane_infos[planes_count].dcc.enable); |
| |
| bundle->surface_updates[planes_count].plane_info = |
| &bundle->plane_infos[planes_count]; |
| |
| if (acrtc_state->stream->link->psr_settings.psr_feature_enabled || |
| acrtc_state->stream->link->replay_settings.replay_feature_enabled) { |
| fill_dc_dirty_rects(plane, old_plane_state, |
| new_plane_state, new_crtc_state, |
| &bundle->flip_addrs[planes_count], |
| acrtc_state->stream->link->psr_settings.psr_version == |
| DC_PSR_VERSION_SU_1, |
| &dirty_rects_changed); |
| |
| /* |
| * If the dirty regions changed, PSR-SU need to be disabled temporarily |
| * and enabled it again after dirty regions are stable to avoid video glitch. |
| * PSR-SU will be enabled in vblank_control_worker() if user pause the video |
| * during the PSR-SU was disabled. |
| */ |
| if (acrtc_state->stream->link->psr_settings.psr_version >= DC_PSR_VERSION_SU_1 && |
| acrtc_attach->dm_irq_params.allow_psr_entry && |
| #ifdef CONFIG_DRM_AMD_SECURE_DISPLAY |
| !amdgpu_dm_crc_window_is_activated(acrtc_state->base.crtc) && |
| #endif |
| dirty_rects_changed) { |
| mutex_lock(&dm->dc_lock); |
| acrtc_state->stream->link->psr_settings.psr_dirty_rects_change_timestamp_ns = |
| timestamp_ns; |
| if (acrtc_state->stream->link->psr_settings.psr_allow_active) |
| amdgpu_dm_psr_disable(acrtc_state->stream); |
| mutex_unlock(&dm->dc_lock); |
| } |
| } |
| |
| /* |
| * Only allow immediate flips for fast updates that don't |
| * change memory domain, FB pitch, DCC state, rotation or |
| * mirroring. |
| * |
| * dm_crtc_helper_atomic_check() only accepts async flips with |
| * fast updates. |
| */ |
| if (crtc->state->async_flip && |
| (acrtc_state->update_type != UPDATE_TYPE_FAST || |
| get_mem_type(old_plane_state->fb) != get_mem_type(fb))) |
| drm_warn_once(state->dev, |
| "[PLANE:%d:%s] async flip with non-fast update\n", |
| plane->base.id, plane->name); |
| |
| bundle->flip_addrs[planes_count].flip_immediate = |
| crtc->state->async_flip && |
| acrtc_state->update_type == UPDATE_TYPE_FAST && |
| get_mem_type(old_plane_state->fb) == get_mem_type(fb); |
| |
| timestamp_ns = ktime_get_ns(); |
| bundle->flip_addrs[planes_count].flip_timestamp_in_us = div_u64(timestamp_ns, 1000); |
| bundle->surface_updates[planes_count].flip_addr = &bundle->flip_addrs[planes_count]; |
| bundle->surface_updates[planes_count].surface = dc_plane; |
| |
| if (!bundle->surface_updates[planes_count].surface) { |
| DRM_ERROR("No surface for CRTC: id=%d\n", |
| acrtc_attach->crtc_id); |
| continue; |
| } |
| |
| if (plane == pcrtc->primary) |
| update_freesync_state_on_stream( |
| dm, |
| acrtc_state, |
| acrtc_state->stream, |
| dc_plane, |
| bundle->flip_addrs[planes_count].flip_timestamp_in_us); |
| |
| drm_dbg_state(state->dev, "%s Flipping to hi: 0x%x, low: 0x%x\n", |
| __func__, |
| bundle->flip_addrs[planes_count].address.grph.addr.high_part, |
| bundle->flip_addrs[planes_count].address.grph.addr.low_part); |
| |
| planes_count += 1; |
| |
| } |
| |
| if (pflip_present) { |
| if (!vrr_active) { |
| /* Use old throttling in non-vrr fixed refresh rate mode |
| * to keep flip scheduling based on target vblank counts |
| * working in a backwards compatible way, e.g., for |
| * clients using the GLX_OML_sync_control extension or |
| * DRI3/Present extension with defined target_msc. |
| */ |
| last_flip_vblank = amdgpu_get_vblank_counter_kms(pcrtc); |
| } else { |
| /* For variable refresh rate mode only: |
| * Get vblank of last completed flip to avoid > 1 vrr |
| * flips per video frame by use of throttling, but allow |
| * flip programming anywhere in the possibly large |
| * variable vrr vblank interval for fine-grained flip |
| * timing control and more opportunity to avoid stutter |
| * on late submission of flips. |
| */ |
| spin_lock_irqsave(&pcrtc->dev->event_lock, flags); |
| last_flip_vblank = acrtc_attach->dm_irq_params.last_flip_vblank; |
| spin_unlock_irqrestore(&pcrtc->dev->event_lock, flags); |
| } |
| |
| target_vblank = last_flip_vblank + wait_for_vblank; |
| |
| /* |
| * Wait until we're out of the vertical blank period before the one |
| * targeted by the flip |
| */ |
| while ((acrtc_attach->enabled && |
| (amdgpu_display_get_crtc_scanoutpos(dm->ddev, acrtc_attach->crtc_id, |
| 0, &vpos, &hpos, NULL, |
| NULL, &pcrtc->hwmode) |
| & (DRM_SCANOUTPOS_VALID | DRM_SCANOUTPOS_IN_VBLANK)) == |
| (DRM_SCANOUTPOS_VALID | DRM_SCANOUTPOS_IN_VBLANK) && |
| (int)(target_vblank - |
| amdgpu_get_vblank_counter_kms(pcrtc)) > 0)) { |
| usleep_range(1000, 1100); |
| } |
| |
| /** |
| * Prepare the flip event for the pageflip interrupt to handle. |
| * |
| * This only works in the case where we've already turned on the |
| * appropriate hardware blocks (eg. HUBP) so in the transition case |
| * from 0 -> n planes we have to skip a hardware generated event |
| * and rely on sending it from software. |
| */ |
| if (acrtc_attach->base.state->event && |
| acrtc_state->active_planes > 0) { |
| drm_crtc_vblank_get(pcrtc); |
| |
| spin_lock_irqsave(&pcrtc->dev->event_lock, flags); |
| |
| WARN_ON(acrtc_attach->pflip_status != AMDGPU_FLIP_NONE); |
| prepare_flip_isr(acrtc_attach); |
| |
| spin_unlock_irqrestore(&pcrtc->dev->event_lock, flags); |
| } |
| |
| if (acrtc_state->stream) { |
| if (acrtc_state->freesync_vrr_info_changed) |
| bundle->stream_update.vrr_infopacket = |
| &acrtc_state->stream->vrr_infopacket; |
| } |
| } else if (cursor_update && acrtc_state->active_planes > 0) { |
| spin_lock_irqsave(&pcrtc->dev->event_lock, flags); |
| if (acrtc_attach->base.state->event) { |
| drm_crtc_vblank_get(pcrtc); |
| acrtc_attach->event = acrtc_attach->base.state->event; |
| acrtc_attach->base.state->event = NULL; |
| } |
| spin_unlock_irqrestore(&pcrtc->dev->event_lock, flags); |
| } |
| |
| /* Update the planes if changed or disable if we don't have any. */ |
| if ((planes_count || acrtc_state->active_planes == 0) && |
| acrtc_state->stream) { |
| /* |
| * If PSR or idle optimizations are enabled then flush out |
| * any pending work before hardware programming. |
| */ |
| if (dm->vblank_control_workqueue) |
| flush_workqueue(dm->vblank_control_workqueue); |
| |
| bundle->stream_update.stream = acrtc_state->stream; |
| if (new_pcrtc_state->mode_changed) { |
| bundle->stream_update.src = acrtc_state->stream->src; |
| bundle->stream_update.dst = acrtc_state->stream->dst; |
| } |
| |
| if (new_pcrtc_state->color_mgmt_changed) { |
| /* |
| * TODO: This isn't fully correct since we've actually |
| * already modified the stream in place. |
| */ |
| bundle->stream_update.gamut_remap = |
| &acrtc_state->stream->gamut_remap_matrix; |
| bundle->stream_update.output_csc_transform = |
| &acrtc_state->stream->csc_color_matrix; |
| bundle->stream_update.out_transfer_func = |
| &acrtc_state->stream->out_transfer_func; |
| bundle->stream_update.lut3d_func = |
| (struct dc_3dlut *) acrtc_state->stream->lut3d_func; |
| bundle->stream_update.func_shaper = |
| (struct dc_transfer_func *) acrtc_state->stream->func_shaper; |
| } |
| |
| acrtc_state->stream->abm_level = acrtc_state->abm_level; |
| if (acrtc_state->abm_level != dm_old_crtc_state->abm_level) |
| bundle->stream_update.abm_level = &acrtc_state->abm_level; |
| |
| mutex_lock(&dm->dc_lock); |
| if ((acrtc_state->update_type > UPDATE_TYPE_FAST) && |
| acrtc_state->stream->link->psr_settings.psr_allow_active) |
| amdgpu_dm_psr_disable(acrtc_state->stream); |
| mutex_unlock(&dm->dc_lock); |
| |
| /* |
| * If FreeSync state on the stream has changed then we need to |
| * re-adjust the min/max bounds now that DC doesn't handle this |
| * as part of commit. |
| */ |
| if (is_dc_timing_adjust_needed(dm_old_crtc_state, acrtc_state)) { |
| spin_lock_irqsave(&pcrtc->dev->event_lock, flags); |
| dc_stream_adjust_vmin_vmax( |
| dm->dc, acrtc_state->stream, |
| &acrtc_attach->dm_irq_params.vrr_params.adjust); |
| spin_unlock_irqrestore(&pcrtc->dev->event_lock, flags); |
| } |
| mutex_lock(&dm->dc_lock); |
| update_planes_and_stream_adapter(dm->dc, |
| acrtc_state->update_type, |
| planes_count, |
| acrtc_state->stream, |
| &bundle->stream_update, |
| bundle->surface_updates); |
| updated_planes_and_streams = true; |
| |
| /** |
| * Enable or disable the interrupts on the backend. |
| * |
| * Most pipes are put into power gating when unused. |
| * |
| * When power gating is enabled on a pipe we lose the |
| * interrupt enablement state when power gating is disabled. |
| * |
| * So we need to update the IRQ control state in hardware |
| * whenever the pipe turns on (since it could be previously |
| * power gated) or off (since some pipes can't be power gated |
| * on some ASICs). |
| */ |
| if (dm_old_crtc_state->active_planes != acrtc_state->active_planes) |
| dm_update_pflip_irq_state(drm_to_adev(dev), |
| acrtc_attach); |
| |
| if (acrtc_state->update_type > UPDATE_TYPE_FAST) { |
| if (acrtc_state->stream->link->replay_settings.config.replay_supported && |
| !acrtc_state->stream->link->replay_settings.replay_feature_enabled) { |
| struct amdgpu_dm_connector *aconn = |
| (struct amdgpu_dm_connector *)acrtc_state->stream->dm_stream_context; |
| amdgpu_dm_link_setup_replay(acrtc_state->stream->link, aconn); |
| } else if (acrtc_state->stream->link->psr_settings.psr_version != DC_PSR_VERSION_UNSUPPORTED && |
| !acrtc_state->stream->link->psr_settings.psr_feature_enabled) { |
| |
| struct amdgpu_dm_connector *aconn = (struct amdgpu_dm_connector *) |
| acrtc_state->stream->dm_stream_context; |
| |
| if (!aconn->disallow_edp_enter_psr) |
| amdgpu_dm_link_setup_psr(acrtc_state->stream); |
| } |
| } |
| |
| /* Decrement skip count when PSR is enabled and we're doing fast updates. */ |
| if (acrtc_state->update_type == UPDATE_TYPE_FAST && |
| acrtc_state->stream->link->psr_settings.psr_feature_enabled) { |
| struct amdgpu_dm_connector *aconn = |
| (struct amdgpu_dm_connector *)acrtc_state->stream->dm_stream_context; |
| |
| if (aconn->psr_skip_count > 0) |
| aconn->psr_skip_count--; |
| |
| /* Allow PSR when skip count is 0. */ |
| acrtc_attach->dm_irq_params.allow_psr_entry = !aconn->psr_skip_count; |
| |
| /* |
| * If sink supports PSR SU, there is no need to rely on |
| * a vblank event disable request to enable PSR. PSR SU |
| * can be enabled immediately once OS demonstrates an |
| * adequate number of fast atomic commits to notify KMD |
| * of update events. See `vblank_control_worker()`. |
| */ |
| if (acrtc_state->stream->link->psr_settings.psr_version >= DC_PSR_VERSION_SU_1 && |
| acrtc_attach->dm_irq_params.allow_psr_entry && |
| #ifdef CONFIG_DRM_AMD_SECURE_DISPLAY |
| !amdgpu_dm_crc_window_is_activated(acrtc_state->base.crtc) && |
| #endif |
| !acrtc_state->stream->link->psr_settings.psr_allow_active && |
| !aconn->disallow_edp_enter_psr && |
| (timestamp_ns - |
| acrtc_state->stream->link->psr_settings.psr_dirty_rects_change_timestamp_ns) > |
| 500000000) |
| amdgpu_dm_psr_enable(acrtc_state->stream); |
| } else { |
| acrtc_attach->dm_irq_params.allow_psr_entry = false; |
| } |
| |
| mutex_unlock(&dm->dc_lock); |
| } |
| |
| /* |
| * Update cursor state *after* programming all the planes. |
| * This avoids redundant programming in the case where we're going |
| * to be disabling a single plane - those pipes are being disabled. |
| */ |
| if (acrtc_state->active_planes && |
| (!updated_planes_and_streams || amdgpu_ip_version(dm->adev, DCE_HWIP, 0) == 0) && |
| acrtc_state->cursor_mode == DM_CURSOR_NATIVE_MODE) |
| amdgpu_dm_commit_cursors(state); |
| |
| cleanup: |
| kfree(bundle); |
| } |
| |
| static void amdgpu_dm_commit_audio(struct drm_device *dev, |
| struct drm_atomic_state *state) |
| { |
| struct amdgpu_device *adev = drm_to_adev(dev); |
| struct amdgpu_dm_connector *aconnector; |
| struct drm_connector *connector; |
| struct drm_connector_state *old_con_state, *new_con_state; |
| struct drm_crtc_state *new_crtc_state; |
| struct dm_crtc_state *new_dm_crtc_state; |
| const struct dc_stream_status *status; |
| int i, inst; |
| |
| /* Notify device removals. */ |
| for_each_oldnew_connector_in_state(state, connector, old_con_state, new_con_state, i) { |
| if (old_con_state->crtc != new_con_state->crtc) { |
| /* CRTC changes require notification. */ |
| goto notify; |
| } |
| |
| if (!new_con_state->crtc) |
| continue; |
| |
| new_crtc_state = drm_atomic_get_new_crtc_state( |
| state, new_con_state->crtc); |
| |
| if (!new_crtc_state) |
| continue; |
| |
| if (!drm_atomic_crtc_needs_modeset(new_crtc_state)) |
| continue; |
| |
| notify: |
| if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK) |
| continue; |
| |
| aconnector = to_amdgpu_dm_connector(connector); |
| |
| mutex_lock(&adev->dm.audio_lock); |
| inst = aconnector->audio_inst; |
| aconnector->audio_inst = -1; |
| mutex_unlock(&adev->dm.audio_lock); |
| |
| amdgpu_dm_audio_eld_notify(adev, inst); |
| } |
| |
| /* Notify audio device additions. */ |
| for_each_new_connector_in_state(state, connector, new_con_state, i) { |
| if (!new_con_state->crtc) |
| continue; |
| |
| new_crtc_state = drm_atomic_get_new_crtc_state( |
| state, new_con_state->crtc); |
| |
| if (!new_crtc_state) |
| continue; |
| |
| if (!drm_atomic_crtc_needs_modeset(new_crtc_state)) |
| continue; |
| |
| new_dm_crtc_state = to_dm_crtc_state(new_crtc_state); |
| if (!new_dm_crtc_state->stream) |
| continue; |
| |
| status = dc_stream_get_status(new_dm_crtc_state->stream); |
| if (!status) |
| continue; |
| |
| if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK) |
| continue; |
| |
| aconnector = to_amdgpu_dm_connector(connector); |
| |
| mutex_lock(&adev->dm.audio_lock); |
| inst = status->audio_inst; |
| aconnector->audio_inst = inst; |
| mutex_unlock(&adev->dm.audio_lock); |
| |
| amdgpu_dm_audio_eld_notify(adev, inst); |
| } |
| } |
| |
| /* |
| * amdgpu_dm_crtc_copy_transient_flags - copy mirrored flags from DRM to DC |
| * @crtc_state: the DRM CRTC state |
| * @stream_state: the DC stream state. |
| * |
| * Copy the mirrored transient state flags from DRM, to DC. It is used to bring |
| * a dc_stream_state's flags in sync with a drm_crtc_state's flags. |
| */ |
| static void amdgpu_dm_crtc_copy_transient_flags(struct drm_crtc_state *crtc_state, |
| struct dc_stream_state *stream_state) |
| { |
| stream_state->mode_changed = drm_atomic_crtc_needs_modeset(crtc_state); |
| } |
| |
| static void dm_clear_writeback(struct amdgpu_display_manager *dm, |
| struct dm_crtc_state *crtc_state) |
| { |
| dc_stream_remove_writeback(dm->dc, crtc_state->stream, 0); |
| } |
| |
| static void amdgpu_dm_commit_streams(struct drm_atomic_state *state, |
| struct dc_state *dc_state) |
| { |
| struct drm_device *dev = state->dev; |
| struct amdgpu_device *adev = drm_to_adev(dev); |
| struct amdgpu_display_manager *dm = &adev->dm; |
| struct drm_crtc *crtc; |
| struct drm_crtc_state *old_crtc_state, *new_crtc_state; |
| struct dm_crtc_state *dm_old_crtc_state, *dm_new_crtc_state; |
| struct drm_connector_state *old_con_state; |
| struct drm_connector *connector; |
| bool mode_set_reset_required = false; |
| u32 i; |
| struct dc_commit_streams_params params = {dc_state->streams, dc_state->stream_count}; |
| |
| /* Disable writeback */ |
| for_each_old_connector_in_state(state, connector, old_con_state, i) { |
| struct dm_connector_state *dm_old_con_state; |
| struct amdgpu_crtc *acrtc; |
| |
| if (connector->connector_type != DRM_MODE_CONNECTOR_WRITEBACK) |
| continue; |
| |
| old_crtc_state = NULL; |
| |
| dm_old_con_state = to_dm_connector_state(old_con_state); |
| if (!dm_old_con_state->base.crtc) |
| continue; |
| |
| acrtc = to_amdgpu_crtc(dm_old_con_state->base.crtc); |
| if (acrtc) |
| old_crtc_state = drm_atomic_get_old_crtc_state(state, &acrtc->base); |
| |
| if (!acrtc->wb_enabled) |
| continue; |
| |
| dm_old_crtc_state = to_dm_crtc_state(old_crtc_state); |
| |
| dm_clear_writeback(dm, dm_old_crtc_state); |
| acrtc->wb_enabled = false; |
| } |
| |
| for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) { |
| struct amdgpu_crtc *acrtc = to_amdgpu_crtc(crtc); |
| |
| dm_old_crtc_state = to_dm_crtc_state(old_crtc_state); |
| |
| if (old_crtc_state->active && |
| (!new_crtc_state->active || |
| drm_atomic_crtc_needs_modeset(new_crtc_state))) { |
| manage_dm_interrupts(adev, acrtc, false); |
| dc_stream_release(dm_old_crtc_state->stream); |
| } |
| } |
| |
| drm_atomic_helper_calc_timestamping_constants(state); |
| |
| /* update changed items */ |
| for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) { |
| struct amdgpu_crtc *acrtc = to_amdgpu_crtc(crtc); |
| |
| dm_new_crtc_state = to_dm_crtc_state(new_crtc_state); |
| dm_old_crtc_state = to_dm_crtc_state(old_crtc_state); |
| |
| drm_dbg_state(state->dev, |
| "amdgpu_crtc id:%d crtc_state_flags: enable:%d, active:%d, planes_changed:%d, mode_changed:%d,active_changed:%d,connectors_changed:%d\n", |
| acrtc->crtc_id, |
| new_crtc_state->enable, |
| new_crtc_state->active, |
| new_crtc_state->planes_changed, |
| new_crtc_state->mode_changed, |
| new_crtc_state->active_changed, |
| new_crtc_state->connectors_changed); |
| |
| /* Disable cursor if disabling crtc */ |
| if (old_crtc_state->active && !new_crtc_state->active) { |
| struct dc_cursor_position position; |
| |
| memset(&position, 0, sizeof(position)); |
| mutex_lock(&dm->dc_lock); |
| dc_exit_ips_for_hw_access(dm->dc); |
| dc_stream_program_cursor_position(dm_old_crtc_state->stream, &position); |
| mutex_unlock(&dm->dc_lock); |
| } |
| |
| /* Copy all transient state flags into dc state */ |
| if (dm_new_crtc_state->stream) { |
| amdgpu_dm_crtc_copy_transient_flags(&dm_new_crtc_state->base, |
| dm_new_crtc_state->stream); |
| } |
| |
| /* handles headless hotplug case, updating new_state and |
| * aconnector as needed |
| */ |
| |
| if (amdgpu_dm_crtc_modeset_required(new_crtc_state, dm_new_crtc_state->stream, dm_old_crtc_state->stream)) { |
| |
| drm_dbg_atomic(dev, |
| "Atomic commit: SET crtc id %d: [%p]\n", |
| acrtc->crtc_id, acrtc); |
| |
| if (!dm_new_crtc_state->stream) { |
| /* |
| * this could happen because of issues with |
| * userspace notifications delivery. |
| * In this case userspace tries to set mode on |
| * display which is disconnected in fact. |
| * dc_sink is NULL in this case on aconnector. |
| * We expect reset mode will come soon. |
| * |
| * This can also happen when unplug is done |
| * during resume sequence ended |
| * |
| * In this case, we want to pretend we still |
| * have a sink to keep the pipe running so that |
| * hw state is consistent with the sw state |
| */ |
| drm_dbg_atomic(dev, |
| "Failed to create new stream for crtc %d\n", |
| acrtc->base.base.id); |
| continue; |
| } |
| |
| if (dm_old_crtc_state->stream) |
| remove_stream(adev, acrtc, dm_old_crtc_state->stream); |
| |
| pm_runtime_get_noresume(dev->dev); |
| |
| acrtc->enabled = true; |
| acrtc->hw_mode = new_crtc_state->mode; |
| crtc->hwmode = new_crtc_state->mode; |
| mode_set_reset_required = true; |
| } else if (modereset_required(new_crtc_state)) { |
| drm_dbg_atomic(dev, |
| "Atomic commit: RESET. crtc id %d:[%p]\n", |
| acrtc->crtc_id, acrtc); |
| /* i.e. reset mode */ |
| if (dm_old_crtc_state->stream) |
| remove_stream(adev, acrtc, dm_old_crtc_state->stream); |
| |
| mode_set_reset_required = true; |
| } |
| } /* for_each_crtc_in_state() */ |
| |
| /* if there mode set or reset, disable eDP PSR, Replay */ |
| if (mode_set_reset_required) { |
| if (dm->vblank_control_workqueue) |
| flush_workqueue(dm->vblank_control_workqueue); |
| |
| amdgpu_dm_replay_disable_all(dm); |
| amdgpu_dm_psr_disable_all(dm); |
| } |
| |
| dm_enable_per_frame_crtc_master_sync(dc_state); |
| mutex_lock(&dm->dc_lock); |
| dc_exit_ips_for_hw_access(dm->dc); |
| WARN_ON(!dc_commit_streams(dm->dc, ¶ms)); |
| |
| /* Allow idle optimization when vblank count is 0 for display off */ |
| if (dm->active_vblank_irq_count == 0) |
| dc_allow_idle_optimizations(dm->dc, true); |
| mutex_unlock(&dm->dc_lock); |
| |
| for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) { |
| struct amdgpu_crtc *acrtc = to_amdgpu_crtc(crtc); |
| |
| dm_new_crtc_state = to_dm_crtc_state(new_crtc_state); |
| |
| if (dm_new_crtc_state->stream != NULL) { |
| const struct dc_stream_status *status = |
| dc_stream_get_status(dm_new_crtc_state->stream); |
| |
| if (!status) |
| status = dc_state_get_stream_status(dc_state, |
| dm_new_crtc_state->stream); |
| if (!status) |
| drm_err(dev, |
| "got no status for stream %p on acrtc%p\n", |
| dm_new_crtc_state->stream, acrtc); |
| else |
| acrtc->otg_inst = status->primary_otg_inst; |
| } |
| } |
| } |
| |
| static void dm_set_writeback(struct amdgpu_display_manager *dm, |
| struct dm_crtc_state *crtc_state, |
| struct drm_connector *connector, |
| struct drm_connector_state *new_con_state) |
| { |
| struct drm_writeback_connector *wb_conn = drm_connector_to_writeback(connector); |
| struct amdgpu_device *adev = dm->adev; |
| struct amdgpu_crtc *acrtc; |
| struct dc_writeback_info *wb_info; |
| struct pipe_ctx *pipe = NULL; |
| struct amdgpu_framebuffer *afb; |
| int i = 0; |
| |
| wb_info = kzalloc(sizeof(*wb_info), GFP_KERNEL); |
| if (!wb_info) { |
| DRM_ERROR("Failed to allocate wb_info\n"); |
| return; |
| } |
| |
| acrtc = to_amdgpu_crtc(wb_conn->encoder.crtc); |
| if (!acrtc) { |
| DRM_ERROR("no amdgpu_crtc found\n"); |
| kfree(wb_info); |
| return; |
| } |
| |
| afb = to_amdgpu_framebuffer(new_con_state->writeback_job->fb); |
| if (!afb) { |
| DRM_ERROR("No amdgpu_framebuffer found\n"); |
| kfree(wb_info); |
| return; |
| } |
| |
| for (i = 0; i < MAX_PIPES; i++) { |
| if (dm->dc->current_state->res_ctx.pipe_ctx[i].stream == crtc_state->stream) { |
| pipe = &dm->dc->current_state->res_ctx.pipe_ctx[i]; |
| break; |
| } |
| } |
| |
| /* fill in wb_info */ |
| wb_info->wb_enabled = true; |
| |
| wb_info->dwb_pipe_inst = 0; |
| wb_info->dwb_params.dwbscl_black_color = 0; |
| wb_info->dwb_params.hdr_mult = 0x1F000; |
| wb_info->dwb_params.csc_params.gamut_adjust_type = CM_GAMUT_ADJUST_TYPE_BYPASS; |
| wb_info->dwb_params.csc_params.gamut_coef_format = CM_GAMUT_REMAP_COEF_FORMAT_S2_13; |
| wb_info->dwb_params.output_depth = DWB_OUTPUT_PIXEL_DEPTH_10BPC; |
| wb_info->dwb_params.cnv_params.cnv_out_bpc = DWB_CNV_OUT_BPC_10BPC; |
| |
| /* width & height from crtc */ |
| wb_info->dwb_params.cnv_params.src_width = acrtc->base.mode.crtc_hdisplay; |
| wb_info->dwb_params.cnv_params.src_height = acrtc->base.mode.crtc_vdisplay; |
| wb_info->dwb_params.dest_width = acrtc->base.mode.crtc_hdisplay; |
| wb_info->dwb_params.dest_height = acrtc->base.mode.crtc_vdisplay; |
| |
| wb_info->dwb_params.cnv_params.crop_en = false; |
| wb_info->dwb_params.stereo_params.stereo_enabled = false; |
| |
| wb_info->dwb_params.cnv_params.out_max_pix_val = 0x3ff; // 10 bits |
| wb_info->dwb_params.cnv_params.out_min_pix_val = 0; |
| wb_info->dwb_params.cnv_params.fc_out_format = DWB_OUT_FORMAT_32BPP_ARGB; |
| wb_info->dwb_params.cnv_params.out_denorm_mode = DWB_OUT_DENORM_BYPASS; |
| |
| wb_info->dwb_params.out_format = dwb_scaler_mode_bypass444; |
| |
| wb_info->dwb_params.capture_rate = dwb_capture_rate_0; |
| |
| wb_info->dwb_params.scaler_taps.h_taps = 4; |
| wb_info->dwb_params.scaler_taps.v_taps = 4; |
| wb_info->dwb_params.scaler_taps.h_taps_c = 2; |
| wb_info->dwb_params.scaler_taps.v_taps_c = 2; |
| wb_info->dwb_params.subsample_position = DWB_INTERSTITIAL_SUBSAMPLING; |
| |
| wb_info->mcif_buf_params.luma_pitch = afb->base.pitches[0]; |
| wb_info->mcif_buf_params.chroma_pitch = afb->base.pitches[1]; |
| |
| for (i = 0; i < DWB_MCIF_BUF_COUNT; i++) { |
| wb_info->mcif_buf_params.luma_address[i] = afb->address; |
| wb_info->mcif_buf_params.chroma_address[i] = 0; |
| } |
| |
| wb_info->mcif_buf_params.p_vmid = 1; |
| if (amdgpu_ip_version(adev, DCE_HWIP, 0) >= IP_VERSION(3, 0, 0)) { |
| wb_info->mcif_warmup_params.start_address.quad_part = afb->address; |
| wb_info->mcif_warmup_params.region_size = |
| wb_info->mcif_buf_params.luma_pitch * wb_info->dwb_params.dest_height; |
| } |
| wb_info->mcif_warmup_params.p_vmid = 1; |
| wb_info->writeback_source_plane = pipe->plane_state; |
| |
| dc_stream_add_writeback(dm->dc, crtc_state->stream, wb_info); |
| |
| acrtc->wb_pending = true; |
| acrtc->wb_conn = wb_conn; |
| drm_writeback_queue_job(wb_conn, new_con_state); |
| } |
| |
| /** |
| * amdgpu_dm_atomic_commit_tail() - AMDgpu DM's commit tail implementation. |
| * @state: The atomic state to commit |
| * |
| * This will tell DC to commit the constructed DC state from atomic_check, |
| * programming the hardware. Any failures here implies a hardware failure, since |
| * atomic check should have filtered anything non-kosher. |
| */ |
| static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state) |
| { |
| struct drm_device *dev = state->dev; |
| struct amdgpu_device *adev = drm_to_adev(dev); |
| struct amdgpu_display_manager *dm = &adev->dm; |
| struct dm_atomic_state *dm_state; |
| struct dc_state *dc_state = NULL; |
| u32 i, j; |
| struct drm_crtc *crtc; |
| struct drm_crtc_state *old_crtc_state, *new_crtc_state; |
| unsigned long flags; |
| bool wait_for_vblank = true; |
| struct drm_connector *connector; |
| struct drm_connector_state *old_con_state, *new_con_state; |
| struct dm_crtc_state *dm_old_crtc_state, *dm_new_crtc_state; |
| int crtc_disable_count = 0; |
| |
| trace_amdgpu_dm_atomic_commit_tail_begin(state); |
| |
| drm_atomic_helper_update_legacy_modeset_state(dev, state); |
| drm_dp_mst_atomic_wait_for_dependencies(state); |
| |
| dm_state = dm_atomic_get_new_state(state); |
| if (dm_state && dm_state->context) { |
| dc_state = dm_state->context; |
| amdgpu_dm_commit_streams(state, dc_state); |
| } |
| |
| for_each_oldnew_connector_in_state(state, connector, old_con_state, new_con_state, i) { |
| struct dm_connector_state *dm_new_con_state = to_dm_connector_state(new_con_state); |
| struct amdgpu_crtc *acrtc = to_amdgpu_crtc(dm_new_con_state->base.crtc); |
| struct amdgpu_dm_connector *aconnector; |
| |
| if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK) |
| continue; |
| |
| aconnector = to_amdgpu_dm_connector(connector); |
| |
| if (!adev->dm.hdcp_workqueue) |
| continue; |
| |
| pr_debug("[HDCP_DM] -------------- i : %x ----------\n", i); |
| |
| if (!connector) |
| continue; |
| |
| pr_debug("[HDCP_DM] connector->index: %x connect_status: %x dpms: %x\n", |
| connector->index, connector->status, connector->dpms); |
| pr_debug("[HDCP_DM] state protection old: %x new: %x\n", |
| old_con_state->content_protection, new_con_state->content_protection); |
| |
| if (aconnector->dc_sink) { |
| if (aconnector->dc_sink->sink_signal != SIGNAL_TYPE_VIRTUAL && |
| aconnector->dc_sink->sink_signal != SIGNAL_TYPE_NONE) { |
| pr_debug("[HDCP_DM] pipe_ctx dispname=%s\n", |
| aconnector->dc_sink->edid_caps.display_name); |
| } |
| } |
| |
| new_crtc_state = NULL; |
| old_crtc_state = NULL; |
| |
| if (acrtc) { |
| new_crtc_state = drm_atomic_get_new_crtc_state(state, &acrtc->base); |
| old_crtc_state = drm_atomic_get_old_crtc_state(state, &acrtc->base); |
| } |
| |
| if (old_crtc_state) |
| pr_debug("old crtc en: %x a: %x m: %x a-chg: %x c-chg: %x\n", |
| old_crtc_state->enable, |
| old_crtc_state->active, |
| old_crtc_state->mode_changed, |
| old_crtc_state->active_changed, |
| old_crtc_state->connectors_changed); |
| |
| if (new_crtc_state) |
| pr_debug("NEW crtc en: %x a: %x m: %x a-chg: %x c-chg: %x\n", |
| new_crtc_state->enable, |
| new_crtc_state->active, |
| new_crtc_state->mode_changed, |
| new_crtc_state->active_changed, |
| new_crtc_state->connectors_changed); |
| } |
| |
| for_each_oldnew_connector_in_state(state, connector, old_con_state, new_con_state, i) { |
| struct dm_connector_state *dm_new_con_state = to_dm_connector_state(new_con_state); |
| struct amdgpu_crtc *acrtc = to_amdgpu_crtc(dm_new_con_state->base.crtc); |
| struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector); |
| |
| if (!adev->dm.hdcp_workqueue) |
| continue; |
| |
| new_crtc_state = NULL; |
| old_crtc_state = NULL; |
| |
| if (acrtc) { |
| new_crtc_state = drm_atomic_get_new_crtc_state(state, &acrtc->base); |
| old_crtc_state = drm_atomic_get_old_crtc_state(state, &acrtc->base); |
| } |
| |
| dm_new_crtc_state = to_dm_crtc_state(new_crtc_state); |
| |
| if (dm_new_crtc_state && dm_new_crtc_state->stream == NULL && |
| connector->state->content_protection == DRM_MODE_CONTENT_PROTECTION_ENABLED) { |
| hdcp_reset_display(adev->dm.hdcp_workqueue, aconnector->dc_link->link_index); |
| new_con_state->content_protection = DRM_MODE_CONTENT_PROTECTION_DESIRED; |
| dm_new_con_state->update_hdcp = true; |
| continue; |
| } |
| |
| if (is_content_protection_different(new_crtc_state, old_crtc_state, new_con_state, |
| old_con_state, connector, adev->dm.hdcp_workqueue)) { |
| /* when display is unplugged from mst hub, connctor will |
| * be destroyed within dm_dp_mst_connector_destroy. connector |
| * hdcp perperties, like type, undesired, desired, enabled, |
| * will be lost. So, save hdcp properties into hdcp_work within |
| * amdgpu_dm_atomic_commit_tail. if the same display is |
| * plugged back with same display index, its hdcp properties |
| * will be retrieved from hdcp_work within dm_dp_mst_get_modes |
| */ |
| |
| bool enable_encryption = false; |
| |
| if (new_con_state->content_protection == DRM_MODE_CONTENT_PROTECTION_DESIRED) |
| enable_encryption = true; |
| |
| if (aconnector->dc_link && aconnector->dc_sink && |
| aconnector->dc_link->type == dc_connection_mst_branch) { |
| struct hdcp_workqueue *hdcp_work = adev->dm.hdcp_workqueue; |
| struct hdcp_workqueue *hdcp_w = |
| &hdcp_work[aconnector->dc_link->link_index]; |
| |
| hdcp_w->hdcp_content_type[connector->index] = |
| new_con_state->hdcp_content_type; |
| hdcp_w->content_protection[connector->index] = |
| new_con_state->content_protection; |
| } |
| |
| if (new_crtc_state && new_crtc_state->mode_changed && |
| new_con_state->content_protection >= DRM_MODE_CONTENT_PROTECTION_DESIRED) |
| enable_encryption = true; |
| |
| DRM_INFO("[HDCP_DM] hdcp_update_display enable_encryption = %x\n", enable_encryption); |
| |
| hdcp_update_display( |
| adev->dm.hdcp_workqueue, aconnector->dc_link->link_index, aconnector, |
| new_con_state->hdcp_content_type, enable_encryption); |
| } |
| } |
| |
| /* Handle connector state changes */ |
| for_each_oldnew_connector_in_state(state, connector, old_con_state, new_con_state, i) { |
| struct dm_connector_state *dm_new_con_state = to_dm_connector_state(new_con_state); |
| struct dm_connector_state *dm_old_con_state = to_dm_connector_state(old_con_state); |
| struct amdgpu_crtc *acrtc = to_amdgpu_crtc(dm_new_con_state->base.crtc); |
| struct dc_surface_update *dummy_updates; |
| struct dc_stream_update stream_update; |
| struct dc_info_packet hdr_packet; |
| struct dc_stream_status *status = NULL; |
| bool abm_changed, hdr_changed, scaling_changed; |
| |
| memset(&stream_update, 0, sizeof(stream_update)); |
| |
| if (acrtc) { |
| new_crtc_state = drm_atomic_get_new_crtc_state(state, &acrtc->base); |
| old_crtc_state = drm_atomic_get_old_crtc_state(state, &acrtc->base); |
| } |
| |
| /* Skip any modesets/resets */ |
| if (!acrtc || drm_atomic_crtc_needs_modeset(new_crtc_state)) |
| continue; |
| |
| dm_new_crtc_state = to_dm_crtc_state(new_crtc_state); |
| dm_old_crtc_state = to_dm_crtc_state(old_crtc_state); |
| |
| scaling_changed = is_scaling_state_different(dm_new_con_state, |
| dm_old_con_state); |
| |
| abm_changed = dm_new_crtc_state->abm_level != |
| dm_old_crtc_state->abm_level; |
| |
| hdr_changed = |
| !drm_connector_atomic_hdr_metadata_equal(old_con_state, new_con_state); |
| |
| if (!scaling_changed && !abm_changed && !hdr_changed) |
| continue; |
| |
| stream_update.stream = dm_new_crtc_state->stream; |
| if (scaling_changed) { |
| update_stream_scaling_settings(&dm_new_con_state->base.crtc->mode, |
| dm_new_con_state, dm_new_crtc_state->stream); |
| |
| stream_update.src = dm_new_crtc_state->stream->src; |
| stream_update.dst = dm_new_crtc_state->stream->dst; |
| } |
| |
| if (abm_changed) { |
| dm_new_crtc_state->stream->abm_level = dm_new_crtc_state->abm_level; |
| |
| stream_update.abm_level = &dm_new_crtc_state->abm_level; |
| } |
| |
| if (hdr_changed) { |
| fill_hdr_info_packet(new_con_state, &hdr_packet); |
| stream_update.hdr_static_metadata = &hdr_packet; |
| } |
| |
| status = dc_stream_get_status(dm_new_crtc_state->stream); |
| |
| if (WARN_ON(!status)) |
| continue; |
| |
| WARN_ON(!status->plane_count); |
| |
| /* |
| * TODO: DC refuses to perform stream updates without a dc_surface_update. |
| * Here we create an empty update on each plane. |
| * To fix this, DC should permit updating only stream properties. |
| */ |
| dummy_updates = kzalloc(sizeof(struct dc_surface_update) * MAX_SURFACES, GFP_ATOMIC); |
| if (!dummy_updates) { |
| DRM_ERROR("Failed to allocate memory for dummy_updates.\n"); |
| continue; |
| } |
| for (j = 0; j < status->plane_count; j++) |
| dummy_updates[j].surface = status->plane_states[0]; |
| |
| sort(dummy_updates, status->plane_count, |
| sizeof(*dummy_updates), dm_plane_layer_index_cmp, NULL); |
| |
| mutex_lock(&dm->dc_lock); |
| dc_exit_ips_for_hw_access(dm->dc); |
| dc_update_planes_and_stream(dm->dc, |
| dummy_updates, |
| status->plane_count, |
| dm_new_crtc_state->stream, |
| &stream_update); |
| mutex_unlock(&dm->dc_lock); |
| kfree(dummy_updates); |
| } |
| |
| /** |
| * Enable interrupts for CRTCs that are newly enabled or went through |
| * a modeset. It was intentionally deferred until after the front end |
| * state was modified to wait until the OTG was on and so the IRQ |
| * handlers didn't access stale or invalid state. |
| */ |
| for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) { |
| struct amdgpu_crtc *acrtc = to_amdgpu_crtc(crtc); |
| #ifdef CONFIG_DEBUG_FS |
| enum amdgpu_dm_pipe_crc_source cur_crc_src; |
| #endif |
| /* Count number of newly disabled CRTCs for dropping PM refs later. */ |
| if (old_crtc_state->active && !new_crtc_state->active) |
| crtc_disable_count++; |
| |
| dm_new_crtc_state = to_dm_crtc_state(new_crtc_state); |
| dm_old_crtc_state = to_dm_crtc_state(old_crtc_state); |
| |
| /* For freesync config update on crtc state and params for irq */ |
| update_stream_irq_parameters(dm, dm_new_crtc_state); |
| |
| #ifdef CONFIG_DEBUG_FS |
| spin_lock_irqsave(&adev_to_drm(adev)->event_lock, flags); |
| cur_crc_src = acrtc->dm_irq_params.crc_src; |
| spin_unlock_irqrestore(&adev_to_drm(adev)->event_lock, flags); |
| #endif |
| |
| if (new_crtc_state->active && |
| (!old_crtc_state->active || |
| drm_atomic_crtc_needs_modeset(new_crtc_state))) { |
| dc_stream_retain(dm_new_crtc_state->stream); |
| acrtc->dm_irq_params.stream = dm_new_crtc_state->stream; |
| manage_dm_interrupts(adev, acrtc, true); |
| } |
| /* Handle vrr on->off / off->on transitions */ |
| amdgpu_dm_handle_vrr_transition(dm_old_crtc_state, dm_new_crtc_state); |
| |
| #ifdef CONFIG_DEBUG_FS |
| if (new_crtc_state->active && |
| (!old_crtc_state->active || |
| drm_atomic_crtc_needs_modeset(new_crtc_state))) { |
| /** |
| * Frontend may have changed so reapply the CRC capture |
| * settings for the stream. |
| */ |
| if (amdgpu_dm_is_valid_crc_source(cur_crc_src)) { |
| #if defined(CONFIG_DRM_AMD_SECURE_DISPLAY) |
| if (amdgpu_dm_crc_window_is_activated(crtc)) { |
| spin_lock_irqsave(&adev_to_drm(adev)->event_lock, flags); |
| acrtc->dm_irq_params.window_param.update_win = true; |
| |
| /** |
| * It takes 2 frames for HW to stably generate CRC when |
| * resuming from suspend, so we set skip_frame_cnt 2. |
| */ |
| acrtc->dm_irq_params.window_param.skip_frame_cnt = 2; |
| spin_unlock_irqrestore(&adev_to_drm(adev)->event_lock, flags); |
| } |
| #endif |
| if (amdgpu_dm_crtc_configure_crc_source( |
| crtc, dm_new_crtc_state, cur_crc_src)) |
| drm_dbg_atomic(dev, "Failed to configure crc source"); |
| } |
| } |
| #endif |
| } |
| |
| for_each_new_crtc_in_state(state, crtc, new_crtc_state, j) |
| if (new_crtc_state->async_flip) |
| wait_for_vblank = false; |
| |
| /* update planes when needed per crtc*/ |
| for_each_new_crtc_in_state(state, crtc, new_crtc_state, j) { |
| dm_new_crtc_state = to_dm_crtc_state(new_crtc_state); |
| |
| if (dm_new_crtc_state->stream) |
| amdgpu_dm_commit_planes(state, dev, dm, crtc, wait_for_vblank); |
| } |
| |
| /* Enable writeback */ |
| for_each_new_connector_in_state(state, connector, new_con_state, i) { |
| struct dm_connector_state *dm_new_con_state = to_dm_connector_state(new_con_state); |
| struct amdgpu_crtc *acrtc = to_amdgpu_crtc(dm_new_con_state->base.crtc); |
| |
| if (connector->connector_type != DRM_MODE_CONNECTOR_WRITEBACK) |
| continue; |
| |
| if (!new_con_state->writeback_job) |
| continue; |
| |
| new_crtc_state = drm_atomic_get_new_crtc_state(state, &acrtc->base); |
| |
| if (!new_crtc_state) |
| continue; |
| |
| if (acrtc->wb_enabled) |
| continue; |
| |
| dm_new_crtc_state = to_dm_crtc_state(new_crtc_state); |
| |
| dm_set_writeback(dm, dm_new_crtc_state, connector, new_con_state); |
| acrtc->wb_enabled = true; |
| } |
| |
| /* Update audio instances for each connector. */ |
| amdgpu_dm_commit_audio(dev, state); |
| |
| /* restore the backlight level */ |
| for (i = 0; i < dm->num_of_edps; i++) { |
| if (dm->backlight_dev[i] && |
| (dm->actual_brightness[i] != dm->brightness[i])) |
| amdgpu_dm_backlight_set_level(dm, i, dm->brightness[i]); |
| } |
| |
| /* |
| * send vblank event on all events not handled in flip and |
| * mark consumed event for drm_atomic_helper_commit_hw_done |
| */ |
| spin_lock_irqsave(&adev_to_drm(adev)->event_lock, flags); |
| for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) { |
| |
| if (new_crtc_state->event) |
| drm_send_event_locked(dev, &new_crtc_state->event->base); |
| |
| new_crtc_state->event = NULL; |
| } |
| spin_unlock_irqrestore(&adev_to_drm(adev)->event_lock, flags); |
| |
| /* Signal HW programming completion */ |
| drm_atomic_helper_commit_hw_done(state); |
| |
| if (wait_for_vblank) |
| drm_atomic_helper_wait_for_flip_done(dev, state); |
| |
| drm_atomic_helper_cleanup_planes(dev, state); |
| |
| /* Don't free the memory if we are hitting this as part of suspend. |
| * This way we don't free any memory during suspend; see |
| * amdgpu_bo_free_kernel(). The memory will be freed in the first |
| * non-suspend modeset or when the driver is torn down. |
| */ |
| if (!adev->in_suspend) { |
| /* return the stolen vga memory back to VRAM */ |
| if (!adev->mman.keep_stolen_vga_memory) |
| amdgpu_bo_free_kernel(&adev->mman.stolen_vga_memory, NULL, NULL); |
| amdgpu_bo_free_kernel(&adev->mman.stolen_extended_memory, NULL, NULL); |
| } |
| |
| /* |
| * Finally, drop a runtime PM reference for each newly disabled CRTC, |
| * so we can put the GPU into runtime suspend if we're not driving any |
| * displays anymore |
| */ |
| for (i = 0; i < crtc_disable_count; i++) |
| pm_runtime_put_autosuspend(dev->dev); |
| pm_runtime_mark_last_busy(dev->dev); |
| } |
| |
| static int dm_force_atomic_commit(struct drm_connector *connector) |
| { |
| int ret = 0; |
| struct drm_device *ddev = connector->dev; |
| struct drm_atomic_state *state = drm_atomic_state_alloc(ddev); |
| struct amdgpu_crtc *disconnected_acrtc = to_amdgpu_crtc(connector->encoder->crtc); |
| struct drm_plane *plane = disconnected_acrtc->base.primary; |
| struct drm_connector_state *conn_state; |
| struct drm_crtc_state *crtc_state; |
| struct drm_plane_state *plane_state; |
| |
| if (!state) |
| return -ENOMEM; |
| |
| state->acquire_ctx = ddev->mode_config.acquire_ctx; |
| |
| /* Construct an atomic state to restore previous display setting */ |
| |
| /* |
| * Attach connectors to drm_atomic_state |
| */ |
| conn_state = drm_atomic_get_connector_state(state, connector); |
| |
| ret = PTR_ERR_OR_ZERO(conn_state); |
| if (ret) |
| goto out; |
| |
| /* Attach crtc to drm_atomic_state*/ |
| crtc_state = drm_atomic_get_crtc_state(state, &disconnected_acrtc->base); |
| |
| ret = PTR_ERR_OR_ZERO(crtc_state); |
| if (ret) |
| goto out; |
| |
| /* force a restore */ |
| crtc_state->mode_changed = true; |
| |
| /* Attach plane to drm_atomic_state */ |
| plane_state = drm_atomic_get_plane_state(state, plane); |
| |
| ret = PTR_ERR_OR_ZERO(plane_state); |
| if (ret) |
| goto out; |
| |
| /* Call commit internally with the state we just constructed */ |
| ret = drm_atomic_commit(state); |
| |
| out: |
| drm_atomic_state_put(state); |
| if (ret) |
| DRM_ERROR("Restoring old state failed with %i\n", ret); |
| |
| return ret; |
| } |
| |
| /* |
| * This function handles all cases when set mode does not come upon hotplug. |
| * This includes when a display is unplugged then plugged back into the |
| * same port and when running without usermode desktop manager supprot |
| */ |
| void dm_restore_drm_connector_state(struct drm_device *dev, |
| struct drm_connector *connector) |
| { |
| struct amdgpu_dm_connector *aconnector; |
| struct amdgpu_crtc *disconnected_acrtc; |
| struct dm_crtc_state *acrtc_state; |
| |
| if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK) |
| return; |
| |
| aconnector = to_amdgpu_dm_connector(connector); |
| |
| if (!aconnector->dc_sink || !connector->state || !connector->encoder) |
| return; |
| |
| disconnected_acrtc = to_amdgpu_crtc(connector->encoder->crtc); |
| if (!disconnected_acrtc) |
| return; |
| |
| acrtc_state = to_dm_crtc_state(disconnected_acrtc->base.state); |
| if (!acrtc_state->stream) |
| return; |
| |
| /* |
| * If the previous sink is not released and different from the current, |
| * we deduce we are in a state where we can not rely on usermode call |
| * to turn on the display, so we do it here |
| */ |
| if (acrtc_state->stream->sink != aconnector->dc_sink) |
| dm_force_atomic_commit(&aconnector->base); |
| } |
| |
| /* |
| * Grabs all modesetting locks to serialize against any blocking commits, |
| * Waits for completion of all non blocking commits. |
| */ |
| static int do_aquire_global_lock(struct drm_device *dev, |
| struct drm_atomic_state *state) |
| { |
| struct drm_crtc *crtc; |
| struct drm_crtc_commit *commit; |
| long ret; |
| |
| /* |
| * Adding all modeset locks to aquire_ctx will |
| * ensure that when the framework release it the |
| * extra locks we are locking here will get released to |
| */ |
| ret = drm_modeset_lock_all_ctx(dev, state->acquire_ctx); |
| if (ret) |
| return ret; |
| |
| list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { |
| spin_lock(&crtc->commit_lock); |
| commit = list_first_entry_or_null(&crtc->commit_list, |
| struct drm_crtc_commit, commit_entry); |
| if (commit) |
| drm_crtc_commit_get(commit); |
| spin_unlock(&crtc->commit_lock); |
| |
| if (!commit) |
| continue; |
| |
| /* |
| * Make sure all pending HW programming completed and |
| * page flips done |
| */ |
| ret = wait_for_completion_interruptible_timeout(&commit->hw_done, 10*HZ); |
| |
| if (ret > 0) |
| ret = wait_for_completion_interruptible_timeout( |
| &commit->flip_done, 10*HZ); |
| |
| if (ret == 0) |
| DRM_ERROR("[CRTC:%d:%s] hw_done or flip_done timed out\n", |
| crtc->base.id, crtc->name); |
| |
| drm_crtc_commit_put(commit); |
| } |
| |
| return ret < 0 ? ret : 0; |
| } |
| |
| static void get_freesync_config_for_crtc( |
| struct dm_crtc_state *new_crtc_state, |
| struct dm_connector_state *new_con_state) |
| { |
| struct mod_freesync_config config = {0}; |
| struct amdgpu_dm_connector *aconnector; |
| struct drm_display_mode *mode = &new_crtc_state->base.mode; |
| int vrefresh = drm_mode_vrefresh(mode); |
| bool fs_vid_mode = false; |
| |
| if (new_con_state->base.connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK) |
| return; |
| |
| aconnector = to_amdgpu_dm_connector(new_con_state->base.connector); |
| |
| new_crtc_state->vrr_supported = new_con_state->freesync_capable && |
| vrefresh >= aconnector->min_vfreq && |
| vrefresh <= aconnector->max_vfreq; |
| |
| if (new_crtc_state->vrr_supported) { |
| new_crtc_state->stream->ignore_msa_timing_param = true; |
| fs_vid_mode = new_crtc_state->freesync_config.state == VRR_STATE_ACTIVE_FIXED; |
| |
| config.min_refresh_in_uhz = aconnector->min_vfreq * 1000000; |
| config.max_refresh_in_uhz = aconnector->max_vfreq * 1000000; |
| config.vsif_supported = true; |
| config.btr = true; |
| |
| if (fs_vid_mode) { |
| config.state = VRR_STATE_ACTIVE_FIXED; |
| config.fixed_refresh_in_uhz = new_crtc_state->freesync_config.fixed_refresh_in_uhz; |
| goto out; |
| } else if (new_crtc_state->base.vrr_enabled) { |
| config.state = VRR_STATE_ACTIVE_VARIABLE; |
| } else { |
| config.state = VRR_STATE_INACTIVE; |
| } |
| } |
| out: |
| new_crtc_state->freesync_config = config; |
| } |
| |
| static void reset_freesync_config_for_crtc( |
| struct dm_crtc_state *new_crtc_state) |
| { |
| new_crtc_state->vrr_supported = false; |
| |
| memset(&new_crtc_state->vrr_infopacket, 0, |
| sizeof(new_crtc_state->vrr_infopacket)); |
| } |
| |
| static bool |
| is_timing_unchanged_for_freesync(struct drm_crtc_state *old_crtc_state, |
| struct drm_crtc_state *new_crtc_state) |
| { |
| const struct drm_display_mode *old_mode, *new_mode; |
| |
| if (!old_crtc_state || !new_crtc_state) |
| return false; |
| |
| old_mode = &old_crtc_state->mode; |
| new_mode = &new_crtc_state->mode; |
| |
| if (old_mode->clock == new_mode->clock && |
| old_mode->hdisplay == new_mode->hdisplay && |
| old_mode->vdisplay == new_mode->vdisplay && |
| old_mode->htotal == new_mode->htotal && |
| old_mode->vtotal != new_mode->vtotal && |
| old_mode->hsync_start == new_mode->hsync_start && |
| old_mode->vsync_start != new_mode->vsync_start && |
| old_mode->hsync_end == new_mode->hsync_end && |
| old_mode->vsync_end != new_mode->vsync_end && |
| old_mode->hskew == new_mode->hskew && |
| old_mode->vscan == new_mode->vscan && |
| (old_mode->vsync_end - old_mode->vsync_start) == |
| (new_mode->vsync_end - new_mode->vsync_start)) |
| return true; |
| |
| return false; |
| } |
| |
| static void set_freesync_fixed_config(struct dm_crtc_state *dm_new_crtc_state) |
| { |
| u64 num, den, res; |
| struct drm_crtc_state *new_crtc_state = &dm_new_crtc_state->base; |
| |
| dm_new_crtc_state->freesync_config.state = VRR_STATE_ACTIVE_FIXED; |
| |
| num = (unsigned long long)new_crtc_state->mode.clock * 1000 * 1000000; |
| den = (unsigned long long)new_crtc_state->mode.htotal * |
| (unsigned long long)new_crtc_state->mode.vtotal; |
| |
| res = div_u64(num, den); |
| dm_new_crtc_state->freesync_config.fixed_refresh_in_uhz = res; |
| } |
| |
| static int dm_update_crtc_state(struct amdgpu_display_manager *dm, |
| struct drm_atomic_state *state, |
| struct drm_crtc *crtc, |
| struct drm_crtc_state *old_crtc_state, |
| struct drm_crtc_state *new_crtc_state, |
| bool enable, |
| bool *lock_and_validation_needed) |
| { |
| struct dm_atomic_state *dm_state = NULL; |
| struct dm_crtc_state *dm_old_crtc_state, *dm_new_crtc_state; |
| struct dc_stream_state *new_stream; |
| int ret = 0; |
| |
| /* |
| * TODO Move this code into dm_crtc_atomic_check once we get rid of dc_validation_set |
| * update changed items |
| */ |
| struct amdgpu_crtc *acrtc = NULL; |
| struct drm_connector *connector = NULL; |
| struct amdgpu_dm_connector *aconnector = NULL; |
| struct drm_connector_state *drm_new_conn_state = NULL, *drm_old_conn_state = NULL; |
| struct dm_connector_state *dm_new_conn_state = NULL, *dm_old_conn_state = NULL; |
| |
| new_stream = NULL; |
| |
| dm_old_crtc_state = to_dm_crtc_state(old_crtc_state); |
| dm_new_crtc_state = to_dm_crtc_state(new_crtc_state); |
| acrtc = to_amdgpu_crtc(crtc); |
| connector = amdgpu_dm_find_first_crtc_matching_connector(state, crtc); |
| if (connector) |
| aconnector = to_amdgpu_dm_connector(connector); |
| |
| /* TODO This hack should go away */ |
| if (connector && enable) { |
| /* Make sure fake sink is created in plug-in scenario */ |
| drm_new_conn_state = drm_atomic_get_new_connector_state(state, |
| connector); |
| drm_old_conn_state = drm_atomic_get_old_connector_state(state, |
| connector); |
| |
| if (IS_ERR(drm_new_conn_state)) { |
| ret = PTR_ERR_OR_ZERO(drm_new_conn_state); |
| goto fail; |
| } |
| |
| dm_new_conn_state = to_dm_connector_state(drm_new_conn_state); |
| dm_old_conn_state = to_dm_connector_state(drm_old_conn_state); |
| |
| if (!drm_atomic_crtc_needs_modeset(new_crtc_state)) |
| goto skip_modeset; |
| |
| new_stream = create_validate_stream_for_sink(aconnector, |
| &new_crtc_state->mode, |
| dm_new_conn_state, |
| dm_old_crtc_state->stream); |
| |
| /* |
| * we can have no stream on ACTION_SET if a display |
| * was disconnected during S3, in this case it is not an |
| * error, the OS will be updated after detection, and |
| * will do the right thing on next atomic commit |
| */ |
| |
| if (!new_stream) { |
| DRM_DEBUG_DRIVER("%s: Failed to create new stream for crtc %d\n", |
| __func__, acrtc->base.base.id); |
| ret = -ENOMEM; |
| goto fail; |
| } |
| |
| /* |
| * TODO: Check VSDB bits to decide whether this should |
| * be enabled or not. |
| */ |
| new_stream->triggered_crtc_reset.enabled = |
| dm->force_timing_sync; |
| |
| dm_new_crtc_state->abm_level = dm_new_conn_state->abm_level; |
| |
| ret = fill_hdr_info_packet(drm_new_conn_state, |
| &new_stream->hdr_static_metadata); |
| if (ret) |
| goto fail; |
| |
| /* |
| * If we already removed the old stream from the context |
| * (and set the new stream to NULL) then we can't reuse |
| * the old stream even if the stream and scaling are unchanged. |
| * We'll hit the BUG_ON and black screen. |
| * |
| * TODO: Refactor this function to allow this check to work |
| * in all conditions. |
| */ |
| if (amdgpu_freesync_vid_mode && |
| dm_new_crtc_state->stream && |
| is_timing_unchanged_for_freesync(new_crtc_state, old_crtc_state)) |
| goto skip_modeset; |
| |
| if (dm_new_crtc_state->stream && |
| dc_is_stream_unchanged(new_stream, dm_old_crtc_state->stream) && |
| dc_is_stream_scaling_unchanged(new_stream, dm_old_crtc_state->stream)) { |
| new_crtc_state->mode_changed = false; |
| DRM_DEBUG_DRIVER("Mode change not required, setting mode_changed to %d", |
| new_crtc_state->mode_changed); |
| } |
| } |
| |
| /* mode_changed flag may get updated above, need to check again */ |
| if (!drm_atomic_crtc_needs_modeset(new_crtc_state)) |
| goto skip_modeset; |
| |
| drm_dbg_state(state->dev, |
| "amdgpu_crtc id:%d crtc_state_flags: enable:%d, active:%d, planes_changed:%d, mode_changed:%d,active_changed:%d,connectors_changed:%d\n", |
| acrtc->crtc_id, |
| new_crtc_state->enable, |
| new_crtc_state->active, |
| new_crtc_state->planes_changed, |
| new_crtc_state->mode_changed, |
| new_crtc_state->active_changed, |
| new_crtc_state->connectors_changed); |
| |
| /* Remove stream for any changed/disabled CRTC */ |
| if (!enable) { |
| |
| if (!dm_old_crtc_state->stream) |
| goto skip_modeset; |
| |
| /* Unset freesync video if it was active before */ |
| if (dm_old_crtc_state->freesync_config.state == VRR_STATE_ACTIVE_FIXED) { |
| dm_new_crtc_state->freesync_config.state = VRR_STATE_INACTIVE; |
| dm_new_crtc_state->freesync_config.fixed_refresh_in_uhz = 0; |
| } |
| |
| /* Now check if we should set freesync video mode */ |
| if (amdgpu_freesync_vid_mode && dm_new_crtc_state->stream && |
| dc_is_stream_unchanged(new_stream, dm_old_crtc_state->stream) && |
| dc_is_stream_scaling_unchanged(new_stream, dm_old_crtc_state->stream) && |
| is_timing_unchanged_for_freesync(new_crtc_state, |
| old_crtc_state)) { |
| new_crtc_state->mode_changed = false; |
| DRM_DEBUG_DRIVER( |
| "Mode change not required for front porch change, setting mode_changed to %d", |
| new_crtc_state->mode_changed); |
| |
| set_freesync_fixed_config(dm_new_crtc_state); |
| |
| goto skip_modeset; |
| } else if (amdgpu_freesync_vid_mode && aconnector && |
| is_freesync_video_mode(&new_crtc_state->mode, |
| aconnector)) { |
| struct drm_display_mode *high_mode; |
| |
| high_mode = get_highest_refresh_rate_mode(aconnector, false); |
| if (!drm_mode_equal(&new_crtc_state->mode, high_mode)) |
| set_freesync_fixed_config(dm_new_crtc_state); |
| } |
| |
| ret = dm_atomic_get_state(state, &dm_state); |
| if (ret) |
| goto fail; |
| |
| DRM_DEBUG_DRIVER("Disabling DRM crtc: %d\n", |
| crtc->base.id); |
| |
| /* i.e. reset mode */ |
| if (dc_state_remove_stream( |
| dm->dc, |
| dm_state->context, |
| dm_old_crtc_state->stream) != DC_OK) { |
| ret = -EINVAL; |
| goto fail; |
| } |
| |
| dc_stream_release(dm_old_crtc_state->stream); |
| dm_new_crtc_state->stream = NULL; |
| |
| reset_freesync_config_for_crtc(dm_new_crtc_state); |
| |
| *lock_and_validation_needed = true; |
| |
| } else {/* Add stream for any updated/enabled CRTC */ |
| /* |
| * Quick fix to prevent NULL pointer on new_stream when |
| * added MST connectors not found in existing crtc_state in the chained mode |
| * TODO: need to dig out the root cause of that |
| */ |
| if (!connector) |
| goto skip_modeset; |
| |
| if (modereset_required(new_crtc_state)) |
| goto skip_modeset; |
| |
| if (amdgpu_dm_crtc_modeset_required(new_crtc_state, new_stream, |
| dm_old_crtc_state->stream)) { |
| |
| WARN_ON(dm_new_crtc_state->stream); |
| |
| ret = dm_atomic_get_state(state, &dm_state); |
| if (ret) |
| goto fail; |
| |
| dm_new_crtc_state->stream = new_stream; |
| |
| dc_stream_retain(new_stream); |
| |
| DRM_DEBUG_ATOMIC("Enabling DRM crtc: %d\n", |
| crtc->base.id); |
| |
| if (dc_state_add_stream( |
| dm->dc, |
| dm_state->context, |
| dm_new_crtc_state->stream) != DC_OK) { |
| ret = -EINVAL; |
| goto fail; |
| } |
| |
| *lock_and_validation_needed = true; |
| } |
| } |
| |
| skip_modeset: |
| /* Release extra reference */ |
| if (new_stream) |
| dc_stream_release(new_stream); |
| |
| /* |
| * We want to do dc stream updates that do not require a |
| * full modeset below. |
| */ |
| if (!(enable && connector && new_crtc_state->active)) |
| return 0; |
| /* |
| * Given above conditions, the dc state cannot be NULL because: |
| * 1. We're in the process of enabling CRTCs (just been added |
| * to the dc context, or already is on the context) |
| * 2. Has a valid connector attached, and |
| * 3. Is currently active and enabled. |
| * => The dc stream state currently exists. |
| */ |
| BUG_ON(dm_new_crtc_state->stream == NULL); |
| |
| /* Scaling or underscan settings */ |
| if (is_scaling_state_different(dm_old_conn_state, dm_new_conn_state) || |
| drm_atomic_crtc_needs_modeset(new_crtc_state)) |
| update_stream_scaling_settings( |
| &new_crtc_state->mode, dm_new_conn_state, dm_new_crtc_state->stream); |
| |
| /* ABM settings */ |
| dm_new_crtc_state->abm_level = dm_new_conn_state->abm_level; |
| |
| /* |
| * Color management settings. We also update color properties |
| * when a modeset is needed, to ensure it gets reprogrammed. |
| */ |
| if (dm_new_crtc_state->base.color_mgmt_changed || |
| dm_old_crtc_state->regamma_tf != dm_new_crtc_state->regamma_tf || |
| drm_atomic_crtc_needs_modeset(new_crtc_state)) { |
| ret = amdgpu_dm_update_crtc_color_mgmt(dm_new_crtc_state); |
| if (ret) |
| goto fail; |
| } |
| |
| /* Update Freesync settings. */ |
| get_freesync_config_for_crtc(dm_new_crtc_state, |
| dm_new_conn_state); |
| |
| return ret; |
| |
| fail: |
| if (new_stream) |
| dc_stream_release(new_stream); |
| return ret; |
| } |
| |
| static bool should_reset_plane(struct drm_atomic_state *state, |
| struct drm_plane *plane, |
| struct drm_plane_state *old_plane_state, |
| struct drm_plane_state *new_plane_state) |
| { |
| struct drm_plane *other; |
| struct drm_plane_state *old_other_state, *new_other_state; |
| struct drm_crtc_state *old_crtc_state, *new_crtc_state; |
| struct dm_crtc_state *old_dm_crtc_state, *new_dm_crtc_state; |
| struct amdgpu_device *adev = drm_to_adev(plane->dev); |
| int i; |
| |
| /* |
| * TODO: Remove this hack for all asics once it proves that the |
| * fast updates works fine on DCN3.2+. |
| */ |
| if (amdgpu_ip_version(adev, DCE_HWIP, 0) < IP_VERSION(3, 2, 0) && |
| state->allow_modeset) |
| return true; |
| |
| /* Exit early if we know that we're adding or removing the plane. */ |
| if (old_plane_state->crtc != new_plane_state->crtc) |
| return true; |
| |
| /* old crtc == new_crtc == NULL, plane not in context. */ |
| if (!new_plane_state->crtc) |
| return false; |
| |
| new_crtc_state = |
| drm_atomic_get_new_crtc_state(state, new_plane_state->crtc); |
| old_crtc_state = |
| drm_atomic_get_old_crtc_state(state, old_plane_state->crtc); |
| |
| if (!new_crtc_state) |
| return true; |
| |
| /* |
| * A change in cursor mode means a new dc pipe needs to be acquired or |
| * released from the state |
| */ |
| old_dm_crtc_state = to_dm_crtc_state(old_crtc_state); |
| new_dm_crtc_state = to_dm_crtc_state(new_crtc_state); |
| if (plane->type == DRM_PLANE_TYPE_CURSOR && |
| old_dm_crtc_state != NULL && |
| old_dm_crtc_state->cursor_mode != new_dm_crtc_state->cursor_mode) { |
| return true; |
| } |
| |
| /* CRTC Degamma changes currently require us to recreate planes. */ |
| if (new_crtc_state->color_mgmt_changed) |
| return true; |
| |
| /* |
| * On zpos change, planes need to be reordered by removing and re-adding |
| * them one by one to the dc state, in order of descending zpos. |
| * |
| * TODO: We can likely skip bandwidth validation if the only thing that |
| * changed about the plane was it'z z-ordering. |
| */ |
| if (new_crtc_state->zpos_changed) |
| return true; |
| |
| if (drm_atomic_crtc_needs_modeset(new_crtc_state)) |
| return true; |
| |
| /* |
| * If there are any new primary or overlay planes being added or |
| * removed then the z-order can potentially change. To ensure |
| * correct z-order and pipe acquisition the current DC architecture |
| * requires us to remove and recreate all existing planes. |
| * |
| * TODO: Come up with a more elegant solution for this. |
| */ |
| for_each_oldnew_plane_in_state(state, other, old_other_state, new_other_state, i) { |
| struct amdgpu_framebuffer *old_afb, *new_afb; |
| struct dm_plane_state *dm_new_other_state, *dm_old_other_state; |
| |
| dm_new_other_state = to_dm_plane_state(new_other_state); |
| dm_old_other_state = to_dm_plane_state(old_other_state); |
| |
| if (other->type == DRM_PLANE_TYPE_CURSOR) |
| continue; |
| |
| if (old_other_state->crtc != new_plane_state->crtc && |
| new_other_state->crtc != new_plane_state->crtc) |
| continue; |
| |
| if (old_other_state->crtc != new_other_state->crtc) |
| return true; |
| |
| /* Src/dst size and scaling updates. */ |
| if (old_other_state->src_w != new_other_state->src_w || |
| old_other_state->src_h != new_other_state->src_h || |
| old_other_state->crtc_w != new_other_state->crtc_w || |
| old_other_state->crtc_h != new_other_state->crtc_h) |
| return true; |
| |
| /* Rotation / mirroring updates. */ |
| if (old_other_state->rotation != new_other_state->rotation) |
| return true; |
| |
| /* Blending updates. */ |
| if (old_other_state->pixel_blend_mode != |
| new_other_state->pixel_blend_mode) |
| return true; |
| |
| /* Alpha updates. */ |
| if (old_other_state->alpha != new_other_state->alpha) |
| return true; |
| |
| /* Colorspace changes. */ |
| if (old_other_state->color_range != new_other_state->color_range || |
| old_other_state->color_encoding != new_other_state->color_encoding) |
| return true; |
| |
| /* HDR/Transfer Function changes. */ |
| if (dm_old_other_state->degamma_tf != dm_new_other_state->degamma_tf || |
| dm_old_other_state->degamma_lut != dm_new_other_state->degamma_lut || |
| dm_old_other_state->hdr_mult != dm_new_other_state->hdr_mult || |
| dm_old_other_state->ctm != dm_new_other_state->ctm || |
| dm_old_other_state->shaper_lut != dm_new_other_state->shaper_lut || |
| dm_old_other_state->shaper_tf != dm_new_other_state->shaper_tf || |
| dm_old_other_state->lut3d != dm_new_other_state->lut3d || |
| dm_old_other_state->blend_lut != dm_new_other_state->blend_lut || |
| dm_old_other_state->blend_tf != dm_new_other_state->blend_tf) |
| return true; |
| |
| /* Framebuffer checks fall at the end. */ |
| if (!old_other_state->fb || !new_other_state->fb) |
| continue; |
| |
| /* Pixel format changes can require bandwidth updates. */ |
| if (old_other_state->fb->format != new_other_state->fb->format) |
| return true; |
| |
| old_afb = (struct amdgpu_framebuffer *)old_other_state->fb; |
| new_afb = (struct amdgpu_framebuffer *)new_other_state->fb; |
| |
| /* Tiling and DCC changes also require bandwidth updates. */ |
| if (old_afb->tiling_flags != new_afb->tiling_flags || |
| old_afb->base.modifier != new_afb->base.modifier) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static int dm_check_cursor_fb(struct amdgpu_crtc *new_acrtc, |
| struct drm_plane_state *new_plane_state, |
| struct drm_framebuffer *fb) |
| { |
| struct amdgpu_device *adev = drm_to_adev(new_acrtc->base.dev); |
| struct amdgpu_framebuffer *afb = to_amdgpu_framebuffer(fb); |
| unsigned int pitch; |
| bool linear; |
| |
| if (fb->width > new_acrtc->max_cursor_width || |
| fb->height > new_acrtc->max_cursor_height) { |
| DRM_DEBUG_ATOMIC("Bad cursor FB size %dx%d\n", |
| new_plane_state->fb->width, |
| new_plane_state->fb->height); |
| return -EINVAL; |
| } |
| if (new_plane_state->src_w != fb->width << 16 || |
| new_plane_state->src_h != fb->height << 16) { |
| DRM_DEBUG_ATOMIC("Cropping not supported for cursor plane\n"); |
| return -EINVAL; |
| } |
| |
| /* Pitch in pixels */ |
| pitch = fb->pitches[0] / fb->format->cpp[0]; |
| |
| if (fb->width != pitch) { |
| DRM_DEBUG_ATOMIC("Cursor FB width %d doesn't match pitch %d", |
| fb->width, pitch); |
| return -EINVAL; |
| } |
| |
| switch (pitch) { |
| case 64: |
| case 128: |
| case 256: |
| /* FB pitch is supported by cursor plane */ |
| break; |
| default: |
| DRM_DEBUG_ATOMIC("Bad cursor FB pitch %d px\n", pitch); |
| return -EINVAL; |
| } |
| |
| /* Core DRM takes care of checking FB modifiers, so we only need to |
| * check tiling flags when the FB doesn't have a modifier. |
| */ |
| if (!(fb->flags & DRM_MODE_FB_MODIFIERS)) { |
| if (adev->family >= AMDGPU_FAMILY_GC_12_0_0) { |
| linear = AMDGPU_TILING_GET(afb->tiling_flags, GFX12_SWIZZLE_MODE) == 0; |
| } else if (adev->family >= AMDGPU_FAMILY_AI) { |
| linear = AMDGPU_TILING_GET(afb->tiling_flags, SWIZZLE_MODE) == 0; |
| } else { |
| linear = AMDGPU_TILING_GET(afb->tiling_flags, ARRAY_MODE) != DC_ARRAY_2D_TILED_THIN1 && |
| AMDGPU_TILING_GET(afb->tiling_flags, ARRAY_MODE) != DC_ARRAY_1D_TILED_THIN1 && |
| AMDGPU_TILING_GET(afb->tiling_flags, MICRO_TILE_MODE) == 0; |
| } |
| if (!linear) { |
| DRM_DEBUG_ATOMIC("Cursor FB not linear"); |
| return -EINVAL; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Helper function for checking the cursor in native mode |
| */ |
| static int dm_check_native_cursor_state(struct drm_crtc *new_plane_crtc, |
| struct drm_plane *plane, |
| struct drm_plane_state *new_plane_state, |
| bool enable) |
| { |
| |
| struct amdgpu_crtc *new_acrtc; |
| int ret; |
| |
| if (!enable || !new_plane_crtc || |
| drm_atomic_plane_disabling(plane->state, new_plane_state)) |
| return 0; |
| |
| new_acrtc = to_amdgpu_crtc(new_plane_crtc); |
| |
| if (new_plane_state->src_x != 0 || new_plane_state->src_y != 0) { |
| DRM_DEBUG_ATOMIC("Cropping not supported for cursor plane\n"); |
| return -EINVAL; |
| } |
| |
| if (new_plane_state->fb) { |
| ret = dm_check_cursor_fb(new_acrtc, new_plane_state, |
| new_plane_state->fb); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static bool dm_should_update_native_cursor(struct drm_atomic_state *state, |
| struct drm_crtc *old_plane_crtc, |
| struct drm_crtc *new_plane_crtc, |
| bool enable) |
| { |
| struct drm_crtc_state *old_crtc_state, *new_crtc_state; |
| struct dm_crtc_state *dm_old_crtc_state, *dm_new_crtc_state; |
| |
| if (!enable) { |
| if (old_plane_crtc == NULL) |
| return true; |
| |
| old_crtc_state = drm_atomic_get_old_crtc_state( |
| state, old_plane_crtc); |
| dm_old_crtc_state = to_dm_crtc_state(old_crtc_state); |
| |
| return dm_old_crtc_state->cursor_mode == DM_CURSOR_NATIVE_MODE; |
| } else { |
| if (new_plane_crtc == NULL) |
| return true; |
| |
| new_crtc_state = drm_atomic_get_new_crtc_state( |
| state, new_plane_crtc); |
| dm_new_crtc_state = to_dm_crtc_state(new_crtc_state); |
| |
| return dm_new_crtc_state->cursor_mode == DM_CURSOR_NATIVE_MODE; |
| } |
| } |
| |
| static int dm_update_plane_state(struct dc *dc, |
| struct drm_atomic_state *state, |
| struct drm_plane *plane, |
| struct drm_plane_state *old_plane_state, |
| struct drm_plane_state *new_plane_state, |
| bool enable, |
| bool *lock_and_validation_needed, |
| bool *is_top_most_overlay) |
| { |
| |
| struct dm_atomic_state *dm_state = NULL; |
| struct drm_crtc *new_plane_crtc, *old_plane_crtc; |
| struct drm_crtc_state *old_crtc_state, *new_crtc_state; |
| struct dm_crtc_state *dm_new_crtc_state, *dm_old_crtc_state; |
| struct dm_plane_state *dm_new_plane_state, *dm_old_plane_state; |
| bool needs_reset, update_native_cursor; |
| int ret = 0; |
| |
| |
| new_plane_crtc = new_plane_state->crtc; |
| old_plane_crtc = old_plane_state->crtc; |
| dm_new_plane_state = to_dm_plane_state(new_plane_state); |
| dm_old_plane_state = to_dm_plane_state(old_plane_state); |
| |
| update_native_cursor = dm_should_update_native_cursor(state, |
| old_plane_crtc, |
| new_plane_crtc, |
| enable); |
| |
| if (plane->type == DRM_PLANE_TYPE_CURSOR && update_native_cursor) { |
| ret = dm_check_native_cursor_state(new_plane_crtc, plane, |
| new_plane_state, enable); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| needs_reset = should_reset_plane(state, plane, old_plane_state, |
| new_plane_state); |
| |
| /* Remove any changed/removed planes */ |
| if (!enable) { |
| if (!needs_reset) |
| return 0; |
| |
| if (!old_plane_crtc) |
| return 0; |
| |
| old_crtc_state = drm_atomic_get_old_crtc_state( |
| state, old_plane_crtc); |
| dm_old_crtc_state = to_dm_crtc_state(old_crtc_state); |
| |
| if (!dm_old_crtc_state->stream) |
| return 0; |
| |
| DRM_DEBUG_ATOMIC("Disabling DRM plane: %d on DRM crtc %d\n", |
| plane->base.id, old_plane_crtc->base.id); |
| |
| ret = dm_atomic_get_state(state, &dm_state); |
| if (ret) |
| return ret; |
| |
| if (!dc_state_remove_plane( |
| dc, |
| dm_old_crtc_state->stream, |
| dm_old_plane_state->dc_state, |
| dm_state->context)) { |
| |
| return -EINVAL; |
| } |
| |
| if (dm_old_plane_state->dc_state) |
| dc_plane_state_release(dm_old_plane_state->dc_state); |
| |
| dm_new_plane_state->dc_state = NULL; |
| |
| *lock_and_validation_needed = true; |
| |
| } else { /* Add new planes */ |
| struct dc_plane_state *dc_new_plane_state; |
| |
| if (drm_atomic_plane_disabling(plane->state, new_plane_state)) |
| return 0; |
| |
| if (!new_plane_crtc) |
| return 0; |
| |
| new_crtc_state = drm_atomic_get_new_crtc_state(state, new_plane_crtc); |
| dm_new_crtc_state = to_dm_crtc_state(new_crtc_state); |
| |
| if (!dm_new_crtc_state->stream) |
| return 0; |
| |
| if (!needs_reset) |
| return 0; |
| |
| ret = amdgpu_dm_plane_helper_check_state(new_plane_state, new_crtc_state); |
| if (ret) |
| goto out; |
| |
| WARN_ON(dm_new_plane_state->dc_state); |
| |
| dc_new_plane_state = dc_create_plane_state(dc); |
| if (!dc_new_plane_state) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| DRM_DEBUG_ATOMIC("Enabling DRM plane: %d on DRM crtc %d\n", |
| plane->base.id, new_plane_crtc->base.id); |
| |
| ret = fill_dc_plane_attributes( |
| drm_to_adev(new_plane_crtc->dev), |
| dc_new_plane_state, |
| new_plane_state, |
| new_crtc_state); |
| if (ret) { |
| dc_plane_state_release(dc_new_plane_state); |
| goto out; |
| } |
| |
| ret = dm_atomic_get_state(state, &dm_state); |
| if (ret) { |
| dc_plane_state_release(dc_new_plane_state); |
| goto out; |
| } |
| |
| /* |
| * Any atomic check errors that occur after this will |
| * not need a release. The plane state will be attached |
| * to the stream, and therefore part of the atomic |
| * state. It'll be released when the atomic state is |
| * cleaned. |
| */ |
| if (!dc_state_add_plane( |
| dc, |
| dm_new_crtc_state->stream, |
| dc_new_plane_state, |
| dm_state->context)) { |
| |
| dc_plane_state_release(dc_new_plane_state); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| dm_new_plane_state->dc_state = dc_new_plane_state; |
| |
| dm_new_crtc_state->mpo_requested |= (plane->type == DRM_PLANE_TYPE_OVERLAY); |
| |
| /* Tell DC to do a full surface update every time there |
| * is a plane change. Inefficient, but works for now. |
| */ |
| dm_new_plane_state->dc_state->update_flags.bits.full_update = 1; |
| |
| *lock_and_validation_needed = true; |
| } |
| |
| out: |
| /* If enabling cursor overlay failed, attempt fallback to native mode */ |
| if (enable && ret == -EINVAL && plane->type == DRM_PLANE_TYPE_CURSOR) { |
| ret = dm_check_native_cursor_state(new_plane_crtc, plane, |
| new_plane_state, enable); |
| if (ret) |
| return ret; |
| |
| dm_new_crtc_state->cursor_mode = DM_CURSOR_NATIVE_MODE; |
| } |
| |
| return ret; |
| } |
| |
| static void dm_get_oriented_plane_size(struct drm_plane_state *plane_state, |
| int *src_w, int *src_h) |
| { |
| switch (plane_state->rotation & DRM_MODE_ROTATE_MASK) { |
| case DRM_MODE_ROTATE_90: |
| case DRM_MODE_ROTATE_270: |
| *src_w = plane_state->src_h >> 16; |
| *src_h = plane_state->src_w >> 16; |
| break; |
| case DRM_MODE_ROTATE_0: |
| case DRM_MODE_ROTATE_180: |
| default: |
| *src_w = plane_state->src_w >> 16; |
| *src_h = plane_state->src_h >> 16; |
| break; |
| } |
| } |
| |
| static void |
| dm_get_plane_scale(struct drm_plane_state *plane_state, |
| int *out_plane_scale_w, int *out_plane_scale_h) |
| { |
| int plane_src_w, plane_src_h; |
| |
| dm_get_oriented_plane_size(plane_state, &plane_src_w, &plane_src_h); |
| *out_plane_scale_w = plane_state->crtc_w * 1000 / plane_src_w; |
| *out_plane_scale_h = plane_state->crtc_h * 1000 / plane_src_h; |
| } |
| |
| /* |
| * The normalized_zpos value cannot be used by this iterator directly. It's only |
| * calculated for enabled planes, potentially causing normalized_zpos collisions |
| * between enabled/disabled planes in the atomic state. We need a unique value |
| * so that the iterator will not generate the same object twice, or loop |
| * indefinitely. |
| */ |
| static inline struct __drm_planes_state *__get_next_zpos( |
| struct drm_atomic_state *state, |
| struct __drm_planes_state *prev) |
| { |
| unsigned int highest_zpos = 0, prev_zpos = 256; |
| uint32_t highest_id = 0, prev_id = UINT_MAX; |
| struct drm_plane_state *new_plane_state; |
| struct drm_plane *plane; |
| int i, highest_i = -1; |
| |
| if (prev != NULL) { |
| prev_zpos = prev->new_state->zpos; |
| prev_id = prev->ptr->base.id; |
| } |
| |
| for_each_new_plane_in_state(state, plane, new_plane_state, i) { |
| /* Skip planes with higher zpos than the previously returned */ |
| if (new_plane_state->zpos > prev_zpos || |
| (new_plane_state->zpos == prev_zpos && |
| plane->base.id >= prev_id)) |
| continue; |
| |
| /* Save the index of the plane with highest zpos */ |
| if (new_plane_state->zpos > highest_zpos || |
| (new_plane_state->zpos == highest_zpos && |
| plane->base.id > highest_id)) { |
| highest_zpos = new_plane_state->zpos; |
| highest_id = plane->base.id; |
| highest_i = i; |
| } |
| } |
| |
| if (highest_i < 0) |
| return NULL; |
| |
| return &state->planes[highest_i]; |
| } |
| |
| /* |
| * Use the uniqueness of the plane's (zpos, drm obj ID) combination to iterate |
| * by descending zpos, as read from the new plane state. This is the same |
| * ordering as defined by drm_atomic_normalize_zpos(). |
| */ |
| #define for_each_oldnew_plane_in_descending_zpos(__state, plane, old_plane_state, new_plane_state) \ |
| for (struct __drm_planes_state *__i = __get_next_zpos((__state), NULL); \ |
| __i != NULL; __i = __get_next_zpos((__state), __i)) \ |
| for_each_if(((plane) = __i->ptr, \ |
| (void)(plane) /* Only to avoid unused-but-set-variable warning */, \ |
| (old_plane_state) = __i->old_state, \ |
| (new_plane_state) = __i->new_state, 1)) |
| |
| static int add_affected_mst_dsc_crtcs(struct drm_atomic_state *state, struct drm_crtc *crtc) |
| { |
| struct drm_connector *connector; |
| struct drm_connector_state *conn_state, *old_conn_state; |
| struct amdgpu_dm_connector *aconnector = NULL; |
| int i; |
| |
| for_each_oldnew_connector_in_state(state, connector, old_conn_state, conn_state, i) { |
| if (!conn_state->crtc) |
| conn_state = old_conn_state; |
| |
| if (conn_state->crtc != crtc) |
| continue; |
| |
| if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK) |
| continue; |
| |
| aconnector = to_amdgpu_dm_connector(connector); |
| if (!aconnector->mst_output_port || !aconnector->mst_root) |
| aconnector = NULL; |
| else |
| break; |
| } |
| |
| if (!aconnector) |
| return 0; |
| |
| return drm_dp_mst_add_affected_dsc_crtcs(state, &aconnector->mst_root->mst_mgr); |
| } |
| |
| /** |
| * DOC: Cursor Modes - Native vs Overlay |
| * |
| * In native mode, the cursor uses a integrated cursor pipe within each DCN hw |
| * plane. It does not require a dedicated hw plane to enable, but it is |
| * subjected to the same z-order and scaling as the hw plane. It also has format |
| * restrictions, a RGB cursor in native mode cannot be enabled within a non-RGB |
| * hw plane. |
| * |
| * In overlay mode, the cursor uses a separate DCN hw plane, and thus has its |
| * own scaling and z-pos. It also has no blending restrictions. It lends to a |
| * cursor behavior more akin to a DRM client's expectations. However, it does |
| * occupy an extra DCN plane, and therefore will only be used if a DCN plane is |
| * available. |
| */ |
| |
| /** |
| * dm_crtc_get_cursor_mode() - Determine the required cursor mode on crtc |
| * @adev: amdgpu device |
| * @state: DRM atomic state |
| * @dm_crtc_state: amdgpu state for the CRTC containing the cursor |
| * @cursor_mode: Returns the required cursor mode on dm_crtc_state |
| * |
| * Get whether the cursor should be enabled in native mode, or overlay mode, on |
| * the dm_crtc_state. |
| * |
| * The cursor should be enabled in overlay mode if there exists an underlying |
| * plane - on which the cursor may be blended - that is either YUV formatted, or |
| * scaled differently from the cursor. |
| * |
| * Since zpos info is required, drm_atomic_normalize_zpos must be called before |
| * calling this function. |
| * |
| * Return: 0 on success, or an error code if getting the cursor plane state |
| * failed. |
| */ |
| static int dm_crtc_get_cursor_mode(struct amdgpu_device *adev, |
| struct drm_atomic_state *state, |
| struct dm_crtc_state *dm_crtc_state, |
| enum amdgpu_dm_cursor_mode *cursor_mode) |
| { |
| struct drm_plane_state *old_plane_state, *plane_state, *cursor_state; |
| struct drm_crtc_state *crtc_state = &dm_crtc_state->base; |
| struct drm_plane *plane; |
| bool consider_mode_change = false; |
| bool entire_crtc_covered = false; |
| bool cursor_changed = false; |
| int underlying_scale_w, underlying_scale_h; |
| int cursor_scale_w, cursor_scale_h; |
| int i; |
| |
| /* Overlay cursor not supported on HW before DCN |
| * DCN401 does not have the cursor-on-scaled-plane or cursor-on-yuv-plane restrictions |
| * as previous DCN generations, so enable native mode on DCN401 in addition to DCE |
| */ |
| if (amdgpu_ip_version(adev, DCE_HWIP, 0) == 0 || |
| amdgpu_ip_version(adev, DCE_HWIP, 0) == IP_VERSION(4, 0, 1)) { |
| *cursor_mode = DM_CURSOR_NATIVE_MODE; |
| return 0; |
| } |
| |
| /* Init cursor_mode to be the same as current */ |
| *cursor_mode = dm_crtc_state->cursor_mode; |
| |
| /* |
| * Cursor mode can change if a plane's format changes, scale changes, is |
| * enabled/disabled, or z-order changes. |
| */ |
| for_each_oldnew_plane_in_state(state, plane, old_plane_state, plane_state, i) { |
| int new_scale_w, new_scale_h, old_scale_w, old_scale_h; |
| |
| /* Only care about planes on this CRTC */ |
| if ((drm_plane_mask(plane) & crtc_state->plane_mask) == 0) |
| continue; |
| |
| if (plane->type == DRM_PLANE_TYPE_CURSOR) |
| cursor_changed = true; |
| |
| if (drm_atomic_plane_enabling(old_plane_state, plane_state) || |
| drm_atomic_plane_disabling(old_plane_state, plane_state) || |
| old_plane_state->fb->format != plane_state->fb->format) { |
| consider_mode_change = true; |
| break; |
| } |
| |
| dm_get_plane_scale(plane_state, &new_scale_w, &new_scale_h); |
| dm_get_plane_scale(old_plane_state, &old_scale_w, &old_scale_h); |
| if (new_scale_w != old_scale_w || new_scale_h != old_scale_h) { |
| consider_mode_change = true; |
| break; |
| } |
| } |
| |
| if (!consider_mode_change && !crtc_state->zpos_changed) |
| return 0; |
| |
| /* |
| * If no cursor change on this CRTC, and not enabled on this CRTC, then |
| * no need to set cursor mode. This avoids needlessly locking the cursor |
| * state. |
| */ |
| if (!cursor_changed && |
| !(drm_plane_mask(crtc_state->crtc->cursor) & crtc_state->plane_mask)) { |
| return 0; |
| } |
| |
| cursor_state = drm_atomic_get_plane_state(state, |
| crtc_state->crtc->cursor); |
| if (IS_ERR(cursor_state)) |
| return PTR_ERR(cursor_state); |
| |
| /* Cursor is disabled */ |
| if (!cursor_state->fb) |
| return 0; |
| |
| /* For all planes in descending z-order (all of which are below cursor |
| * as per zpos definitions), check their scaling and format |
| */ |
| for_each_oldnew_plane_in_descending_zpos(state, plane, old_plane_state, plane_state) { |
| |
| /* Only care about non-cursor planes on this CRTC */ |
| if ((drm_plane_mask(plane) & crtc_state->plane_mask) == 0 || |
| plane->type == DRM_PLANE_TYPE_CURSOR) |
| continue; |
| |
| /* Underlying plane is YUV format - use overlay cursor */ |
| if (amdgpu_dm_plane_is_video_format(plane_state->fb->format->format)) { |
| *cursor_mode = DM_CURSOR_OVERLAY_MODE; |
| return 0; |
| } |
| |
| dm_get_plane_scale(plane_state, |
| &underlying_scale_w, &underlying_scale_h); |
| dm_get_plane_scale(cursor_state, |
| &cursor_scale_w, &cursor_scale_h); |
| |
| /* Underlying plane has different scale - use overlay cursor */ |
| if (cursor_scale_w != underlying_scale_w && |
| cursor_scale_h != underlying_scale_h) { |
| *cursor_mode = DM_CURSOR_OVERLAY_MODE; |
| return 0; |
| } |
| |
| /* If this plane covers the whole CRTC, no need to check planes underneath */ |
| if (plane_state->crtc_x <= 0 && plane_state->crtc_y <= 0 && |
| plane_state->crtc_x + plane_state->crtc_w >= crtc_state->mode.hdisplay && |
| plane_state->crtc_y + plane_state->crtc_h >= crtc_state->mode.vdisplay) { |
| entire_crtc_covered = true; |
| break; |
| } |
| } |
| |
| /* If planes do not cover the entire CRTC, use overlay mode to enable |
| * cursor over holes |
| */ |
| if (entire_crtc_covered) |
| *cursor_mode = DM_CURSOR_NATIVE_MODE; |
| else |
| *cursor_mode = DM_CURSOR_OVERLAY_MODE; |
| |
| return 0; |
| } |
| |
| /** |
| * amdgpu_dm_atomic_check() - Atomic check implementation for AMDgpu DM. |
| * |
| * @dev: The DRM device |
| * @state: The atomic state to commit |
| * |
| * Validate that the given atomic state is programmable by DC into hardware. |
| * This involves constructing a &struct dc_state reflecting the new hardware |
| * state we wish to commit, then querying DC to see if it is programmable. It's |
| * important not to modify the existing DC state. Otherwise, atomic_check |
| * may unexpectedly commit hardware changes. |
| * |
| * When validating the DC state, it's important that the right locks are |
| * acquired. For full updates case which removes/adds/updates streams on one |
| * CRTC while flipping on another CRTC, acquiring global lock will guarantee |
| * that any such full update commit will wait for completion of any outstanding |
| * flip using DRMs synchronization events. |
| * |
| * Note that DM adds the affected connectors for all CRTCs in state, when that |
| * might not seem necessary. This is because DC stream creation requires the |
| * DC sink, which is tied to the DRM connector state. Cleaning this up should |
| * be possible but non-trivial - a possible TODO item. |
| * |
| * Return: -Error code if validation failed. |
| */ |
| static int amdgpu_dm_atomic_check(struct drm_device *dev, |
| struct drm_atomic_state *state) |
| { |
| struct amdgpu_device *adev = drm_to_adev(dev); |
| struct dm_atomic_state *dm_state = NULL; |
| struct dc *dc = adev->dm.dc; |
| struct drm_connector *connector; |
| struct drm_connector_state *old_con_state, *new_con_state; |
| struct drm_crtc *crtc; |
| struct drm_crtc_state *old_crtc_state, *new_crtc_state; |
| struct drm_plane *plane; |
| struct drm_plane_state *old_plane_state, *new_plane_state, *new_cursor_state; |
| enum dc_status status; |
| int ret, i; |
| bool lock_and_validation_needed = false; |
| bool is_top_most_overlay = true; |
| struct dm_crtc_state *dm_old_crtc_state, *dm_new_crtc_state; |
| struct drm_dp_mst_topology_mgr *mgr; |
| struct drm_dp_mst_topology_state *mst_state; |
| struct dsc_mst_fairness_vars vars[MAX_PIPES] = {0}; |
| |
| trace_amdgpu_dm_atomic_check_begin(state); |
| |
| ret = drm_atomic_helper_check_modeset(dev, state); |
| if (ret) { |
| drm_dbg_atomic(dev, "drm_atomic_helper_check_modeset() failed\n"); |
| goto fail; |
| } |
| |
| /* Check connector changes */ |
| for_each_oldnew_connector_in_state(state, connector, old_con_state, new_con_state, i) { |
| struct dm_connector_state *dm_old_con_state = to_dm_connector_state(old_con_state); |
| struct dm_connector_state *dm_new_con_state = to_dm_connector_state(new_con_state); |
| |
| /* Skip connectors that are disabled or part of modeset already. */ |
| if (!new_con_state->crtc) |
| continue; |
| |
| new_crtc_state = drm_atomic_get_crtc_state(state, new_con_state->crtc); |
| if (IS_ERR(new_crtc_state)) { |
| drm_dbg_atomic(dev, "drm_atomic_get_crtc_state() failed\n"); |
| ret = PTR_ERR(new_crtc_state); |
| goto fail; |
| } |
| |
| if (dm_old_con_state->abm_level != dm_new_con_state->abm_level || |
| dm_old_con_state->scaling != dm_new_con_state->scaling) |
| new_crtc_state->connectors_changed = true; |
| } |
| |
| if (dc_resource_is_dsc_encoding_supported(dc)) { |
| for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) { |
| if (drm_atomic_crtc_needs_modeset(new_crtc_state)) { |
| ret = add_affected_mst_dsc_crtcs(state, crtc); |
| if (ret) { |
| drm_dbg_atomic(dev, "add_affected_mst_dsc_crtcs() failed\n"); |
| goto fail; |
| } |
| } |
| } |
| } |
| for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) { |
| dm_old_crtc_state = to_dm_crtc_state(old_crtc_state); |
| |
| if (!drm_atomic_crtc_needs_modeset(new_crtc_state) && |
| !new_crtc_state->color_mgmt_changed && |
| old_crtc_state->vrr_enabled == new_crtc_state->vrr_enabled && |
| dm_old_crtc_state->dsc_force_changed == false) |
| continue; |
| |
| ret = amdgpu_dm_verify_lut_sizes(new_crtc_state); |
| if (ret) { |
| drm_dbg_atomic(dev, "amdgpu_dm_verify_lut_sizes() failed\n"); |
| goto fail; |
| } |
| |
| if (!new_crtc_state->enable) |
| continue; |
| |
| ret = drm_atomic_add_affected_connectors(state, crtc); |
| if (ret) { |
| drm_dbg_atomic(dev, "drm_atomic_add_affected_connectors() failed\n"); |
| goto fail; |
| } |
| |
| ret = drm_atomic_add_affected_planes(state, crtc); |
| if (ret) { |
| drm_dbg_atomic(dev, "drm_atomic_add_affected_planes() failed\n"); |
| goto fail; |
| } |
| |
| if (dm_old_crtc_state->dsc_force_changed) |
| new_crtc_state->mode_changed = true; |
| } |
| |
| /* |
| * Add all primary and overlay planes on the CRTC to the state |
| * whenever a plane is enabled to maintain correct z-ordering |
| * and to enable fast surface updates. |
| */ |
| drm_for_each_crtc(crtc, dev) { |
| bool modified = false; |
| |
| for_each_oldnew_plane_in_state(state, plane, old_plane_state, new_plane_state, i) { |
| if (plane->type == DRM_PLANE_TYPE_CURSOR) |
| continue; |
| |
| if (new_plane_state->crtc == crtc || |
| old_plane_state->crtc == crtc) { |
| modified = true; |
| break; |
| } |
| } |
| |
| if (!modified) |
| continue; |
| |
| drm_for_each_plane_mask(plane, state->dev, crtc->state->plane_mask) { |
| if (plane->type == DRM_PLANE_TYPE_CURSOR) |
| continue; |
| |
| new_plane_state = |
| drm_atomic_get_plane_state(state, plane); |
| |
| if (IS_ERR(new_plane_state)) { |
| ret = PTR_ERR(new_plane_state); |
| drm_dbg_atomic(dev, "new_plane_state is BAD\n"); |
| goto fail; |
| } |
| } |
| } |
| |
| /* |
| * DC consults the zpos (layer_index in DC terminology) to determine the |
| * hw plane on which to enable the hw cursor (see |
| * `dcn10_can_pipe_disable_cursor`). By now, all modified planes are in |
| * atomic state, so call drm helper to normalize zpos. |
| */ |
| ret = drm_atomic_normalize_zpos(dev, state); |
| if (ret) { |
| drm_dbg(dev, "drm_atomic_normalize_zpos() failed\n"); |
| goto fail; |
| } |
| |
| /* |
| * Determine whether cursors on each CRTC should be enabled in native or |
| * overlay mode. |
| */ |
| for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) { |
| dm_new_crtc_state = to_dm_crtc_state(new_crtc_state); |
| |
| ret = dm_crtc_get_cursor_mode(adev, state, dm_new_crtc_state, |
| &dm_new_crtc_state->cursor_mode); |
| if (ret) { |
| drm_dbg(dev, "Failed to determine cursor mode\n"); |
| goto fail; |
| } |
| } |
| |
| /* Remove exiting planes if they are modified */ |
| for_each_oldnew_plane_in_descending_zpos(state, plane, old_plane_state, new_plane_state) { |
| if (old_plane_state->fb && new_plane_state->fb && |
| get_mem_type(old_plane_state->fb) != |
| get_mem_type(new_plane_state->fb)) |
| lock_and_validation_needed = true; |
| |
| ret = dm_update_plane_state(dc, state, plane, |
| old_plane_state, |
| new_plane_state, |
| false, |
| &lock_and_validation_needed, |
| &is_top_most_overlay); |
| if (ret) { |
| drm_dbg_atomic(dev, "dm_update_plane_state() failed\n"); |
| goto fail; |
| } |
| } |
| |
| /* Disable all crtcs which require disable */ |
| for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) { |
| ret = dm_update_crtc_state(&adev->dm, state, crtc, |
| old_crtc_state, |
| new_crtc_state, |
| false, |
| &lock_and_validation_needed); |
| if (ret) { |
| drm_dbg_atomic(dev, "DISABLE: dm_update_crtc_state() failed\n"); |
| goto fail; |
| } |
| } |
| |
| /* Enable all crtcs which require enable */ |
| for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) { |
| ret = dm_update_crtc_state(&adev->dm, state, crtc, |
| old_crtc_state, |
| new_crtc_state, |
| true, |
| &lock_and_validation_needed); |
| if (ret) { |
| drm_dbg_atomic(dev, "ENABLE: dm_update_crtc_state() failed\n"); |
| goto fail; |
| } |
| } |
| |
| /* Add new/modified planes */ |
| for_each_oldnew_plane_in_descending_zpos(state, plane, old_plane_state, new_plane_state) { |
| ret = dm_update_plane_state(dc, state, plane, |
| old_plane_state, |
| new_plane_state, |
| true, |
| &lock_and_validation_needed, |
| &is_top_most_overlay); |
| if (ret) { |
| drm_dbg_atomic(dev, "dm_update_plane_state() failed\n"); |
| goto fail; |
| } |
| } |
| |
| #if defined(CONFIG_DRM_AMD_DC_FP) |
| if (dc_resource_is_dsc_encoding_supported(dc)) { |
| ret = pre_validate_dsc(state, &dm_state, vars); |
| if (ret != 0) |
| goto fail; |
| } |
| #endif |
| |
| /* Run this here since we want to validate the streams we created */ |
| ret = drm_atomic_helper_check_planes(dev, state); |
| if (ret) { |
| drm_dbg_atomic(dev, "drm_atomic_helper_check_planes() failed\n"); |
| goto fail; |
| } |
| |
| for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) { |
| dm_new_crtc_state = to_dm_crtc_state(new_crtc_state); |
| if (dm_new_crtc_state->mpo_requested) |
| drm_dbg_atomic(dev, "MPO enablement requested on crtc:[%p]\n", crtc); |
| } |
| |
| /* Check cursor restrictions */ |
| for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) { |
| enum amdgpu_dm_cursor_mode required_cursor_mode; |
| int is_rotated, is_scaled; |
| |
| /* Overlay cusor not subject to native cursor restrictions */ |
| dm_new_crtc_state = to_dm_crtc_state(new_crtc_state); |
| if (dm_new_crtc_state->cursor_mode == DM_CURSOR_OVERLAY_MODE) |
| continue; |
| |
| /* Check if rotation or scaling is enabled on DCN401 */ |
| if ((drm_plane_mask(crtc->cursor) & new_crtc_state->plane_mask) && |
| amdgpu_ip_version(adev, DCE_HWIP, 0) == IP_VERSION(4, 0, 1)) { |
| new_cursor_state = drm_atomic_get_new_plane_state(state, crtc->cursor); |
| |
| is_rotated = new_cursor_state && |
| ((new_cursor_state->rotation & DRM_MODE_ROTATE_MASK) != DRM_MODE_ROTATE_0); |
| is_scaled = new_cursor_state && ((new_cursor_state->src_w >> 16 != new_cursor_state->crtc_w) || |
| (new_cursor_state->src_h >> 16 != new_cursor_state->crtc_h)); |
| |
| if (is_rotated || is_scaled) { |
| drm_dbg_driver( |
| crtc->dev, |
| "[CRTC:%d:%s] cannot enable hardware cursor due to rotation/scaling\n", |
| crtc->base.id, crtc->name); |
| ret = -EINVAL; |
| goto fail; |
| } |
| } |
| |
| /* If HW can only do native cursor, check restrictions again */ |
| ret = dm_crtc_get_cursor_mode(adev, state, dm_new_crtc_state, |
| &required_cursor_mode); |
| if (ret) { |
| drm_dbg_driver(crtc->dev, |
| "[CRTC:%d:%s] Checking cursor mode failed\n", |
| crtc->base.id, crtc->name); |
| goto fail; |
| } else if (required_cursor_mode == DM_CURSOR_OVERLAY_MODE) { |
| drm_dbg_driver(crtc->dev, |
| "[CRTC:%d:%s] Cannot enable native cursor due to scaling or YUV restrictions\n", |
| crtc->base.id, crtc->name); |
| ret = -EINVAL; |
| goto fail; |
| } |
| } |
| |
| if (state->legacy_cursor_update) { |
| /* |
| * This is a fast cursor update coming from the plane update |
| * helper, check if it can be done asynchronously for better |
| * performance. |
| */ |
| state->async_update = |
| !drm_atomic_helper_async_check(dev, state); |
| |
| /* |
| * Skip the remaining global validation if this is an async |
| * update. Cursor updates can be done without affecting |
| * state or bandwidth calcs and this avoids the performance |
| * penalty of locking the private state object and |
| * allocating a new dc_state. |
| */ |
| if (state->async_update) |
| return 0; |
| } |
| |
| /* Check scaling and underscan changes*/ |
| /* TODO Removed scaling changes validation due to inability to commit |
| * new stream into context w\o causing full reset. Need to |
| * decide how to handle. |
| */ |
| for_each_oldnew_connector_in_state(state, connector, old_con_state, new_con_state, i) { |
| struct dm_connector_state *dm_old_con_state = to_dm_connector_state(old_con_state); |
| struct dm_connector_state *dm_new_con_state = to_dm_connector_state(new_con_state); |
| struct amdgpu_crtc *acrtc = to_amdgpu_crtc(dm_new_con_state->base.crtc); |
| |
| /* Skip any modesets/resets */ |
| if (!acrtc || drm_atomic_crtc_needs_modeset( |
| drm_atomic_get_new_crtc_state(state, &acrtc->base))) |
| continue; |
| |
| /* Skip any thing not scale or underscan changes */ |
| if (!is_scaling_state_different(dm_new_con_state, dm_old_con_state)) |
| continue; |
| |
| lock_and_validation_needed = true; |
| } |
| |
| /* set the slot info for each mst_state based on the link encoding format */ |
| for_each_new_mst_mgr_in_state(state, mgr, mst_state, i) { |
| struct amdgpu_dm_connector *aconnector; |
| struct drm_connector *connector; |
| struct drm_connector_list_iter iter; |
| u8 link_coding_cap; |
| |
| drm_connector_list_iter_begin(dev, &iter); |
| drm_for_each_connector_iter(connector, &iter) { |
| if (connector->index == mst_state->mgr->conn_base_id) { |
| aconnector = to_amdgpu_dm_connector(connector); |
| link_coding_cap = dc_link_dp_mst_decide_link_encoding_format(aconnector->dc_link); |
| drm_dp_mst_update_slots(mst_state, link_coding_cap); |
| |
| break; |
| } |
| } |
| drm_connector_list_iter_end(&iter); |
| } |
| |
| /** |
| * Streams and planes are reset when there are changes that affect |
| * bandwidth. Anything that affects bandwidth needs to go through |
| * DC global validation to ensure that the configuration can be applied |
| * to hardware. |
| * |
| * We have to currently stall out here in atomic_check for outstanding |
| * commits to finish in this case because our IRQ handlers reference |
| * DRM state directly - we can end up disabling interrupts too early |
| * if we don't. |
| * |
| * TODO: Remove this stall and drop DM state private objects. |
| */ |
| if (lock_and_validation_needed) { |
| ret = dm_atomic_get_state(state, &dm_state); |
| if (ret) { |
| drm_dbg_atomic(dev, "dm_atomic_get_state() failed\n"); |
| goto fail; |
| } |
| |
| ret = do_aquire_global_lock(dev, state); |
| if (ret) { |
| drm_dbg_atomic(dev, "do_aquire_global_lock() failed\n"); |
| goto fail; |
| } |
| |
| #if defined(CONFIG_DRM_AMD_DC_FP) |
| if (dc_resource_is_dsc_encoding_supported(dc)) { |
| ret = compute_mst_dsc_configs_for_state(state, dm_state->context, vars); |
| if (ret) { |
| drm_dbg_atomic(dev, "compute_mst_dsc_configs_for_state() failed\n"); |
| ret = -EINVAL; |
| goto fail; |
| } |
| } |
| #endif |
| |
| ret = dm_update_mst_vcpi_slots_for_dsc(state, dm_state->context, vars); |
| if (ret) { |
| drm_dbg_atomic(dev, "dm_update_mst_vcpi_slots_for_dsc() failed\n"); |
| goto fail; |
| } |
| |
| /* |
| * Perform validation of MST topology in the state: |
| * We need to perform MST atomic check before calling |
| * dc_validate_global_state(), or there is a chance |
| * to get stuck in an infinite loop and hang eventually. |
| */ |
| ret = drm_dp_mst_atomic_check(state); |
| if (ret) { |
| drm_dbg_atomic(dev, "drm_dp_mst_atomic_check() failed\n"); |
| goto fail; |
| } |
| status = dc_validate_global_state(dc, dm_state->context, true); |
| if (status != DC_OK) { |
| drm_dbg_atomic(dev, "DC global validation failure: %s (%d)", |
| dc_status_to_str(status), status); |
| ret = -EINVAL; |
| goto fail; |
| } |
| } else { |
| /* |
| * The commit is a fast update. Fast updates shouldn't change |
| * the DC context, affect global validation, and can have their |
| * commit work done in parallel with other commits not touching |
| * the same resource. If we have a new DC context as part of |
| * the DM atomic state from validation we need to free it and |
| * retain the existing one instead. |
| * |
| * Furthermore, since the DM atomic state only contains the DC |
| * context and can safely be annulled, we can free the state |
| * and clear the associated private object now to free |
| * some memory and avoid a possible use-after-free later. |
| */ |
| |
| for (i = 0; i < state->num_private_objs; i++) { |
| struct drm_private_obj *obj = state->private_objs[i].ptr; |
| |
| if (obj->funcs == adev->dm.atomic_obj.funcs) { |
| int j = state->num_private_objs-1; |
| |
| dm_atomic_destroy_state(obj, |
| state->private_objs[i].state); |
| |
| /* If i is not at the end of the array then the |
| * last element needs to be moved to where i was |
| * before the array can safely be truncated. |
| */ |
| if (i != j) |
| state->private_objs[i] = |
| state->private_objs[j]; |
| |
| state->private_objs[j].ptr = NULL; |
| state->private_objs[j].state = NULL; |
| state->private_objs[j].old_state = NULL; |
| state->private_objs[j].new_state = NULL; |
| |
| state->num_private_objs = j; |
| break; |
| } |
| } |
| } |
| |
| /* Store the overall update type for use later in atomic check. */ |
| for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) { |
| struct dm_crtc_state *dm_new_crtc_state = |
| to_dm_crtc_state(new_crtc_state); |
| |
| /* |
| * Only allow async flips for fast updates that don't change |
| * the FB pitch, the DCC state, rotation, etc. |
| */ |
| if (new_crtc_state->async_flip && lock_and_validation_needed) { |
| drm_dbg_atomic(crtc->dev, |
| "[CRTC:%d:%s] async flips are only supported for fast updates\n", |
| crtc->base.id, crtc->name); |
| ret = -EINVAL; |
| goto fail; |
| } |
| |
| dm_new_crtc_state->update_type = lock_and_validation_needed ? |
| UPDATE_TYPE_FULL : UPDATE_TYPE_FAST; |
| } |
| |
| /* Must be success */ |
| WARN_ON(ret); |
| |
| trace_amdgpu_dm_atomic_check_finish(state, ret); |
| |
| return ret; |
| |
| fail: |
| if (ret == -EDEADLK) |
| drm_dbg_atomic(dev, "Atomic check stopped to avoid deadlock.\n"); |
| else if (ret == -EINTR || ret == -EAGAIN || ret == -ERESTARTSYS) |
| drm_dbg_atomic(dev, "Atomic check stopped due to signal.\n"); |
| else |
| drm_dbg_atomic(dev, "Atomic check failed with err: %d\n", ret); |
| |
| trace_amdgpu_dm_atomic_check_finish(state, ret); |
| |
| return ret; |
| } |
| |
| static bool is_dp_capable_without_timing_msa(struct dc *dc, |
| struct amdgpu_dm_connector *amdgpu_dm_connector) |
| { |
| u8 dpcd_data; |
| bool capable = false; |
| |
| if (amdgpu_dm_connector->dc_link && |
| dm_helpers_dp_read_dpcd( |
| NULL, |
| amdgpu_dm_connector->dc_link, |
| DP_DOWN_STREAM_PORT_COUNT, |
| &dpcd_data, |
| sizeof(dpcd_data))) { |
| capable = (dpcd_data & DP_MSA_TIMING_PAR_IGNORED) ? true:false; |
| } |
| |
| return capable; |
| } |
| |
| static bool dm_edid_parser_send_cea(struct amdgpu_display_manager *dm, |
| unsigned int offset, |
| unsigned int total_length, |
| u8 *data, |
| unsigned int length, |
| struct amdgpu_hdmi_vsdb_info *vsdb) |
| { |
| bool res; |
| union dmub_rb_cmd cmd; |
| struct dmub_cmd_send_edid_cea *input; |
| struct dmub_cmd_edid_cea_output *output; |
| |
| if (length > DMUB_EDID_CEA_DATA_CHUNK_BYTES) |
| return false; |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| |
| input = &cmd.edid_cea.data.input; |
| |
| cmd.edid_cea.header.type = DMUB_CMD__EDID_CEA; |
| cmd.edid_cea.header.sub_type = 0; |
| cmd.edid_cea.header.payload_bytes = |
| sizeof(cmd.edid_cea) - sizeof(cmd.edid_cea.header); |
| input->offset = offset; |
| input->length = length; |
| input->cea_total_length = total_length; |
| memcpy(input->payload, data, length); |
| |
| res = dc_wake_and_execute_dmub_cmd(dm->dc->ctx, &cmd, DM_DMUB_WAIT_TYPE_WAIT_WITH_REPLY); |
| if (!res) { |
| DRM_ERROR("EDID CEA parser failed\n"); |
| return false; |
| } |
| |
| output = &cmd.edid_cea.data.output; |
| |
| if (output->type == DMUB_CMD__EDID_CEA_ACK) { |
| if (!output->ack.success) { |
| DRM_ERROR("EDID CEA ack failed at offset %d\n", |
| output->ack.offset); |
| } |
| } else if (output->type == DMUB_CMD__EDID_CEA_AMD_VSDB) { |
| if (!output->amd_vsdb.vsdb_found) |
| return false; |
| |
| vsdb->freesync_supported = output->amd_vsdb.freesync_supported; |
| vsdb->amd_vsdb_version = output->amd_vsdb.amd_vsdb_version; |
| vsdb->min_refresh_rate_hz = output->amd_vsdb.min_frame_rate; |
| vsdb->max_refresh_rate_hz = output->amd_vsdb.max_frame_rate; |
| } else { |
| DRM_WARN("Unknown EDID CEA parser results\n"); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static bool parse_edid_cea_dmcu(struct amdgpu_display_manager *dm, |
| u8 *edid_ext, int len, |
| struct amdgpu_hdmi_vsdb_info *vsdb_info) |
| { |
| int i; |
| |
| /* send extension block to DMCU for parsing */ |
| for (i = 0; i < len; i += 8) { |
| bool res; |
| int offset; |
| |
| /* send 8 bytes a time */ |
| if (!dc_edid_parser_send_cea(dm->dc, i, len, &edid_ext[i], 8)) |
| return false; |
| |
| if (i+8 == len) { |
| /* EDID block sent completed, expect result */ |
| int version, min_rate, max_rate; |
| |
| res = dc_edid_parser_recv_amd_vsdb(dm->dc, &version, &min_rate, &max_rate); |
| if (res) { |
| /* amd vsdb found */ |
| vsdb_info->freesync_supported = 1; |
| vsdb_info->amd_vsdb_version = version; |
| vsdb_info->min_refresh_rate_hz = min_rate; |
| vsdb_info->max_refresh_rate_hz = max_rate; |
| return true; |
| } |
| /* not amd vsdb */ |
| return false; |
| } |
| |
| /* check for ack*/ |
| res = dc_edid_parser_recv_cea_ack(dm->dc, &offset); |
| if (!res) |
| return false; |
| } |
| |
| return false; |
| } |
| |
| static bool parse_edid_cea_dmub(struct amdgpu_display_manager *dm, |
| u8 *edid_ext, int len, |
| struct amdgpu_hdmi_vsdb_info *vsdb_info) |
| { |
| int i; |
| |
| /* send extension block to DMCU for parsing */ |
| for (i = 0; i < len; i += 8) { |
| /* send 8 bytes a time */ |
| if (!dm_edid_parser_send_cea(dm, i, len, &edid_ext[i], 8, vsdb_info)) |
| return false; |
| } |
| |
| return vsdb_info->freesync_supported; |
| } |
| |
| static bool parse_edid_cea(struct amdgpu_dm_connector *aconnector, |
| u8 *edid_ext, int len, |
| struct amdgpu_hdmi_vsdb_info *vsdb_info) |
| { |
| struct amdgpu_device *adev = drm_to_adev(aconnector->base.dev); |
| bool ret; |
| |
| mutex_lock(&adev->dm.dc_lock); |
| if (adev->dm.dmub_srv) |
| ret = parse_edid_cea_dmub(&adev->dm, edid_ext, len, vsdb_info); |
| else |
| ret = parse_edid_cea_dmcu(&adev->dm, edid_ext, len, vsdb_info); |
| mutex_unlock(&adev->dm.dc_lock); |
| return ret; |
| } |
| |
| static void parse_edid_displayid_vrr(struct drm_connector *connector, |
| struct edid *edid) |
| { |
| u8 *edid_ext = NULL; |
| int i; |
| int j = 0; |
| u16 min_vfreq; |
| u16 max_vfreq; |
| |
| if (edid == NULL || edid->extensions == 0) |
| return; |
| |
| /* Find DisplayID extension */ |
| for (i = 0; i < edid->extensions; i++) { |
| edid_ext = (void *)(edid + (i + 1)); |
| if (edid_ext[0] == DISPLAYID_EXT) |
| break; |
| } |
| |
| if (edid_ext == NULL) |
| return; |
| |
| while (j < EDID_LENGTH) { |
| /* Get dynamic video timing range from DisplayID if available */ |
| if (EDID_LENGTH - j > 13 && edid_ext[j] == 0x25 && |
| (edid_ext[j+1] & 0xFE) == 0 && (edid_ext[j+2] == 9)) { |
| min_vfreq = edid_ext[j+9]; |
| if (edid_ext[j+1] & 7) |
| max_vfreq = edid_ext[j+10] + ((edid_ext[j+11] & 3) << 8); |
| else |
| max_vfreq = edid_ext[j+10]; |
| |
| if (max_vfreq && min_vfreq) { |
| connector->display_info.monitor_range.max_vfreq = max_vfreq; |
| connector->display_info.monitor_range.min_vfreq = min_vfreq; |
| |
| return; |
| } |
| } |
| j++; |
| } |
| } |
| |
| static int parse_amd_vsdb(struct amdgpu_dm_connector *aconnector, |
| struct edid *edid, struct amdgpu_hdmi_vsdb_info *vsdb_info) |
| { |
| u8 *edid_ext = NULL; |
| int i; |
| int j = 0; |
| |
| if (edid == NULL || edid->extensions == 0) |
| return -ENODEV; |
| |
| /* Find DisplayID extension */ |
| for (i = 0; i < edid->extensions; i++) { |
| edid_ext = (void *)(edid + (i + 1)); |
| if (edid_ext[0] == DISPLAYID_EXT) |
| break; |
| } |
| |
| while (j < EDID_LENGTH) { |
| struct amd_vsdb_block *amd_vsdb = (struct amd_vsdb_block *)&edid_ext[j]; |
| unsigned int ieeeId = (amd_vsdb->ieee_id[2] << 16) | (amd_vsdb->ieee_id[1] << 8) | (amd_vsdb->ieee_id[0]); |
| |
| if (ieeeId == HDMI_AMD_VENDOR_SPECIFIC_DATA_BLOCK_IEEE_REGISTRATION_ID && |
| amd_vsdb->version == HDMI_AMD_VENDOR_SPECIFIC_DATA_BLOCK_VERSION_3) { |
| vsdb_info->replay_mode = (amd_vsdb->feature_caps & AMD_VSDB_VERSION_3_FEATURECAP_REPLAYMODE) ? true : false; |
| vsdb_info->amd_vsdb_version = HDMI_AMD_VENDOR_SPECIFIC_DATA_BLOCK_VERSION_3; |
| DRM_DEBUG_KMS("Panel supports Replay Mode: %d\n", vsdb_info->replay_mode); |
| |
| return true; |
| } |
| j++; |
| } |
| |
| return false; |
| } |
| |
| static int parse_hdmi_amd_vsdb(struct amdgpu_dm_connector *aconnector, |
| struct edid *edid, struct amdgpu_hdmi_vsdb_info *vsdb_info) |
| { |
| u8 *edid_ext = NULL; |
| int i; |
| bool valid_vsdb_found = false; |
| |
| /*----- drm_find_cea_extension() -----*/ |
| /* No EDID or EDID extensions */ |
| if (edid == NULL || edid->extensions == 0) |
| return -ENODEV; |
| |
| /* Find CEA extension */ |
| for (i = 0; i < edid->extensions; i++) { |
| edid_ext = (uint8_t *)edid + EDID_LENGTH * (i + 1); |
| if (edid_ext[0] == CEA_EXT) |
| break; |
| } |
| |
| if (i == edid->extensions) |
| return -ENODEV; |
| |
| /*----- cea_db_offsets() -----*/ |
| if (edid_ext[0] != CEA_EXT) |
| return -ENODEV; |
| |
| valid_vsdb_found = parse_edid_cea(aconnector, edid_ext, EDID_LENGTH, vsdb_info); |
| |
| return valid_vsdb_found ? i : -ENODEV; |
| } |
| |
| /** |
| * amdgpu_dm_update_freesync_caps - Update Freesync capabilities |
| * |
| * @connector: Connector to query. |
| * @edid: EDID from monitor |
| * |
| * Amdgpu supports Freesync in DP and HDMI displays, and it is required to keep |
| * track of some of the display information in the internal data struct used by |
| * amdgpu_dm. This function checks which type of connector we need to set the |
| * FreeSync parameters. |
| */ |
| void amdgpu_dm_update_freesync_caps(struct drm_connector *connector, |
| struct edid *edid) |
| { |
| int i = 0; |
| struct detailed_timing *timing; |
| struct detailed_non_pixel *data; |
| struct detailed_data_monitor_range *range; |
| struct amdgpu_dm_connector *amdgpu_dm_connector = |
| to_amdgpu_dm_connector(connector); |
| struct dm_connector_state *dm_con_state = NULL; |
| struct dc_sink *sink; |
| |
| struct amdgpu_device *adev = drm_to_adev(connector->dev); |
| struct amdgpu_hdmi_vsdb_info vsdb_info = {0}; |
| bool freesync_capable = false; |
| enum adaptive_sync_type as_type = ADAPTIVE_SYNC_TYPE_NONE; |
| |
| if (!connector->state) { |
| DRM_ERROR("%s - Connector has no state", __func__); |
| goto update; |
| } |
| |
| sink = amdgpu_dm_connector->dc_sink ? |
| amdgpu_dm_connector->dc_sink : |
| amdgpu_dm_connector->dc_em_sink; |
| |
| if (!edid || !sink) { |
| dm_con_state = to_dm_connector_state(connector->state); |
| |
| amdgpu_dm_connector->min_vfreq = 0; |
| amdgpu_dm_connector->max_vfreq = 0; |
| connector->display_info.monitor_range.min_vfreq = 0; |
| connector->display_info.monitor_range.max_vfreq = 0; |
| freesync_capable = false; |
| |
| goto update; |
| } |
| |
| dm_con_state = to_dm_connector_state(connector->state); |
| |
| if (!adev->dm.freesync_module) |
| goto update; |
| |
| /* Some eDP panels only have the refresh rate range info in DisplayID */ |
| if ((connector->display_info.monitor_range.min_vfreq == 0 || |
| connector->display_info.monitor_range.max_vfreq == 0)) |
| parse_edid_displayid_vrr(connector, edid); |
| |
| if (edid && (sink->sink_signal == SIGNAL_TYPE_DISPLAY_PORT || |
| sink->sink_signal == SIGNAL_TYPE_EDP)) { |
| bool edid_check_required = false; |
| |
| if (is_dp_capable_without_timing_msa(adev->dm.dc, |
| amdgpu_dm_connector)) { |
| if (edid->features & DRM_EDID_FEATURE_CONTINUOUS_FREQ) { |
| amdgpu_dm_connector->min_vfreq = connector->display_info.monitor_range.min_vfreq; |
| amdgpu_dm_connector->max_vfreq = connector->display_info.monitor_range.max_vfreq; |
| if (amdgpu_dm_connector->max_vfreq - |
| amdgpu_dm_connector->min_vfreq > 10) |
| freesync_capable = true; |
| } else { |
| edid_check_required = edid->version > 1 || |
| (edid->version == 1 && |
| edid->revision > 1); |
| } |
| } |
| |
| if (edid_check_required) { |
| for (i = 0; i < 4; i++) { |
| |
| timing = &edid->detailed_timings[i]; |
| data = &timing->data.other_data; |
| range = &data->data.range; |
| /* |
| * Check if monitor has continuous frequency mode |
| */ |
| if (data->type != EDID_DETAIL_MONITOR_RANGE) |
| continue; |
| /* |
| * Check for flag range limits only. If flag == 1 then |
| * no additional timing information provided. |
| * Default GTF, GTF Secondary curve and CVT are not |
| * supported |
| */ |
| if (range->flags != 1) |
| continue; |
| |
| connector->display_info.monitor_range.min_vfreq = range->min_vfreq; |
| connector->display_info.monitor_range.max_vfreq = range->max_vfreq; |
| |
| if (edid->revision >= 4) { |
| if (data->pad2 & DRM_EDID_RANGE_OFFSET_MIN_VFREQ) |
| connector->display_info.monitor_range.min_vfreq += 255; |
| if (data->pad2 & DRM_EDID_RANGE_OFFSET_MAX_VFREQ) |
| connector->display_info.monitor_range.max_vfreq += 255; |
| } |
| |
| amdgpu_dm_connector->min_vfreq = |
| connector->display_info.monitor_range.min_vfreq; |
| amdgpu_dm_connector->max_vfreq = |
| connector->display_info.monitor_range.max_vfreq; |
| |
| break; |
| } |
| |
| if (amdgpu_dm_connector->max_vfreq - |
| amdgpu_dm_connector->min_vfreq > 10) { |
| |
| freesync_capable = true; |
| } |
| } |
| parse_amd_vsdb(amdgpu_dm_connector, edid, &vsdb_info); |
| |
| if (vsdb_info.replay_mode) { |
| amdgpu_dm_connector->vsdb_info.replay_mode = vsdb_info.replay_mode; |
| amdgpu_dm_connector->vsdb_info.amd_vsdb_version = vsdb_info.amd_vsdb_version; |
| amdgpu_dm_connector->as_type = ADAPTIVE_SYNC_TYPE_EDP; |
| } |
| |
| } else if (edid && sink->sink_signal == SIGNAL_TYPE_HDMI_TYPE_A) { |
| i = parse_hdmi_amd_vsdb(amdgpu_dm_connector, edid, &vsdb_info); |
| if (i >= 0 && vsdb_info.freesync_supported) { |
| timing = &edid->detailed_timings[i]; |
| data = &timing->data.other_data; |
| |
| amdgpu_dm_connector->min_vfreq = vsdb_info.min_refresh_rate_hz; |
| amdgpu_dm_connector->max_vfreq = vsdb_info.max_refresh_rate_hz; |
| if (amdgpu_dm_connector->max_vfreq - amdgpu_dm_connector->min_vfreq > 10) |
| freesync_capable = true; |
| |
| connector->display_info.monitor_range.min_vfreq = vsdb_info.min_refresh_rate_hz; |
| connector->display_info.monitor_range.max_vfreq = vsdb_info.max_refresh_rate_hz; |
| } |
| } |
| |
| as_type = dm_get_adaptive_sync_support_type(amdgpu_dm_connector->dc_link); |
| |
| if (as_type == FREESYNC_TYPE_PCON_IN_WHITELIST) { |
| i = parse_hdmi_amd_vsdb(amdgpu_dm_connector, edid, &vsdb_info); |
| if (i >= 0 && vsdb_info.freesync_supported && vsdb_info.amd_vsdb_version > 0) { |
| |
| amdgpu_dm_connector->pack_sdp_v1_3 = true; |
| amdgpu_dm_connector->as_type = as_type; |
| amdgpu_dm_connector->vsdb_info = vsdb_info; |
| |
| amdgpu_dm_connector->min_vfreq = vsdb_info.min_refresh_rate_hz; |
| amdgpu_dm_connector->max_vfreq = vsdb_info.max_refresh_rate_hz; |
| if (amdgpu_dm_connector->max_vfreq - amdgpu_dm_connector->min_vfreq > 10) |
| freesync_capable = true; |
| |
| connector->display_info.monitor_range.min_vfreq = vsdb_info.min_refresh_rate_hz; |
| connector->display_info.monitor_range.max_vfreq = vsdb_info.max_refresh_rate_hz; |
| } |
| } |
| |
| update: |
| if (dm_con_state) |
| dm_con_state->freesync_capable = freesync_capable; |
| |
| if (connector->vrr_capable_property) |
| drm_connector_set_vrr_capable_property(connector, |
| freesync_capable); |
| } |
| |
| void amdgpu_dm_trigger_timing_sync(struct drm_device *dev) |
| { |
| struct amdgpu_device *adev = drm_to_adev(dev); |
| struct dc *dc = adev->dm.dc; |
| int i; |
| |
| mutex_lock(&adev->dm.dc_lock); |
| if (dc->current_state) { |
| for (i = 0; i < dc->current_state->stream_count; ++i) |
| dc->current_state->streams[i] |
| ->triggered_crtc_reset.enabled = |
| adev->dm.force_timing_sync; |
| |
| dm_enable_per_frame_crtc_master_sync(dc->current_state); |
| dc_trigger_sync(dc, dc->current_state); |
| } |
| mutex_unlock(&adev->dm.dc_lock); |
| } |
| |
| static inline void amdgpu_dm_exit_ips_for_hw_access(struct dc *dc) |
| { |
| if (dc->ctx->dmub_srv && !dc->ctx->dmub_srv->idle_exit_counter) |
| dc_exit_ips_for_hw_access(dc); |
| } |
| |
| void dm_write_reg_func(const struct dc_context *ctx, uint32_t address, |
| u32 value, const char *func_name) |
| { |
| #ifdef DM_CHECK_ADDR_0 |
| if (address == 0) { |
| drm_err(adev_to_drm(ctx->driver_context), |
| "invalid register write. address = 0"); |
| return; |
| } |
| #endif |
| |
| amdgpu_dm_exit_ips_for_hw_access(ctx->dc); |
| cgs_write_register(ctx->cgs_device, address, value); |
| trace_amdgpu_dc_wreg(&ctx->perf_trace->write_count, address, value); |
| } |
| |
| uint32_t dm_read_reg_func(const struct dc_context *ctx, uint32_t address, |
| const char *func_name) |
| { |
| u32 value; |
| #ifdef DM_CHECK_ADDR_0 |
| if (address == 0) { |
| drm_err(adev_to_drm(ctx->driver_context), |
| "invalid register read; address = 0\n"); |
| return 0; |
| } |
| #endif |
| |
| if (ctx->dmub_srv && |
| ctx->dmub_srv->reg_helper_offload.gather_in_progress && |
| !ctx->dmub_srv->reg_helper_offload.should_burst_write) { |
| ASSERT(false); |
| return 0; |
| } |
| |
| amdgpu_dm_exit_ips_for_hw_access(ctx->dc); |
| |
| value = cgs_read_register(ctx->cgs_device, address); |
| |
| trace_amdgpu_dc_rreg(&ctx->perf_trace->read_count, address, value); |
| |
| return value; |
| } |
| |
| int amdgpu_dm_process_dmub_aux_transfer_sync( |
| struct dc_context *ctx, |
| unsigned int link_index, |
| struct aux_payload *payload, |
| enum aux_return_code_type *operation_result) |
| { |
| struct amdgpu_device *adev = ctx->driver_context; |
| struct dmub_notification *p_notify = adev->dm.dmub_notify; |
| int ret = -1; |
| |
| mutex_lock(&adev->dm.dpia_aux_lock); |
| if (!dc_process_dmub_aux_transfer_async(ctx->dc, link_index, payload)) { |
| *operation_result = AUX_RET_ERROR_ENGINE_ACQUIRE; |
| goto out; |
| } |
| |
| if (!wait_for_completion_timeout(&adev->dm.dmub_aux_transfer_done, 10 * HZ)) { |
| DRM_ERROR("wait_for_completion_timeout timeout!"); |
| *operation_result = AUX_RET_ERROR_TIMEOUT; |
| goto out; |
| } |
| |
| if (p_notify->result != AUX_RET_SUCCESS) { |
| /* |
| * Transient states before tunneling is enabled could |
| * lead to this error. We can ignore this for now. |
| */ |
| if (p_notify->result != AUX_RET_ERROR_PROTOCOL_ERROR) { |
| DRM_WARN("DPIA AUX failed on 0x%x(%d), error %d\n", |
| payload->address, payload->length, |
| p_notify->result); |
| } |
| *operation_result = AUX_RET_ERROR_INVALID_REPLY; |
| goto out; |
| } |
| |
| |
| payload->reply[0] = adev->dm.dmub_notify->aux_reply.command; |
| if (!payload->write && p_notify->aux_reply.length && |
| (payload->reply[0] == AUX_TRANSACTION_REPLY_AUX_ACK)) { |
| |
| if (payload->length != p_notify->aux_reply.length) { |
| DRM_WARN("invalid read length %d from DPIA AUX 0x%x(%d)!\n", |
| p_notify->aux_reply.length, |
| payload->address, payload->length); |
| *operation_result = AUX_RET_ERROR_INVALID_REPLY; |
| goto out; |
| } |
| |
| memcpy(payload->data, p_notify->aux_reply.data, |
| p_notify->aux_reply.length); |
| } |
| |
| /* success */ |
| ret = p_notify->aux_reply.length; |
| *operation_result = p_notify->result; |
| out: |
| reinit_completion(&adev->dm.dmub_aux_transfer_done); |
| mutex_unlock(&adev->dm.dpia_aux_lock); |
| return ret; |
| } |
| |
| int amdgpu_dm_process_dmub_set_config_sync( |
| struct dc_context *ctx, |
| unsigned int link_index, |
| struct set_config_cmd_payload *payload, |
| enum set_config_status *operation_result) |
| { |
| struct amdgpu_device *adev = ctx->driver_context; |
| bool is_cmd_complete; |
| int ret; |
| |
| mutex_lock(&adev->dm.dpia_aux_lock); |
| is_cmd_complete = dc_process_dmub_set_config_async(ctx->dc, |
| link_index, payload, adev->dm.dmub_notify); |
| |
| if (is_cmd_complete || wait_for_completion_timeout(&adev->dm.dmub_aux_transfer_done, 10 * HZ)) { |
| ret = 0; |
| *operation_result = adev->dm.dmub_notify->sc_status; |
| } else { |
| DRM_ERROR("wait_for_completion_timeout timeout!"); |
| ret = -1; |
| *operation_result = SET_CONFIG_UNKNOWN_ERROR; |
| } |
| |
| if (!is_cmd_complete) |
| reinit_completion(&adev->dm.dmub_aux_transfer_done); |
| mutex_unlock(&adev->dm.dpia_aux_lock); |
| return ret; |
| } |
| |
| bool dm_execute_dmub_cmd(const struct dc_context *ctx, union dmub_rb_cmd *cmd, enum dm_dmub_wait_type wait_type) |
| { |
| return dc_dmub_srv_cmd_run(ctx->dmub_srv, cmd, wait_type); |
| } |
| |
| bool dm_execute_dmub_cmd_list(const struct dc_context *ctx, unsigned int count, union dmub_rb_cmd *cmd, enum dm_dmub_wait_type wait_type) |
| { |
| return dc_dmub_srv_cmd_run_list(ctx->dmub_srv, count, cmd, wait_type); |
| } |