| // SPDX-License-Identifier: MIT |
| /* |
| * Copyright © 2021 Intel Corporation |
| */ |
| |
| #include <linux/backlight.h> |
| #include <linux/kernel.h> |
| #include <linux/pwm.h> |
| #include <linux/string_helpers.h> |
| |
| #include <acpi/video.h> |
| |
| #include "i915_reg.h" |
| #include "intel_backlight.h" |
| #include "intel_backlight_regs.h" |
| #include "intel_connector.h" |
| #include "intel_de.h" |
| #include "intel_display_types.h" |
| #include "intel_dp_aux_backlight.h" |
| #include "intel_dsi_dcs_backlight.h" |
| #include "intel_panel.h" |
| #include "intel_pci_config.h" |
| #include "intel_pps.h" |
| #include "intel_quirks.h" |
| |
| /** |
| * scale - scale values from one range to another |
| * @source_val: value in range [@source_min..@source_max] |
| * @source_min: minimum legal value for @source_val |
| * @source_max: maximum legal value for @source_val |
| * @target_min: corresponding target value for @source_min |
| * @target_max: corresponding target value for @source_max |
| * |
| * Return @source_val in range [@source_min..@source_max] scaled to range |
| * [@target_min..@target_max]. |
| */ |
| static u32 scale(u32 source_val, |
| u32 source_min, u32 source_max, |
| u32 target_min, u32 target_max) |
| { |
| u64 target_val; |
| |
| WARN_ON(source_min > source_max); |
| WARN_ON(target_min > target_max); |
| |
| /* defensive */ |
| source_val = clamp(source_val, source_min, source_max); |
| |
| /* avoid overflows */ |
| target_val = mul_u32_u32(source_val - source_min, |
| target_max - target_min); |
| target_val = DIV_ROUND_CLOSEST_ULL(target_val, source_max - source_min); |
| target_val += target_min; |
| |
| return target_val; |
| } |
| |
| /* |
| * Scale user_level in range [0..user_max] to [0..hw_max], clamping the result |
| * to [hw_min..hw_max]. |
| */ |
| static u32 clamp_user_to_hw(struct intel_connector *connector, |
| u32 user_level, u32 user_max) |
| { |
| struct intel_panel *panel = &connector->panel; |
| u32 hw_level; |
| |
| hw_level = scale(user_level, 0, user_max, 0, panel->backlight.max); |
| hw_level = clamp(hw_level, panel->backlight.min, panel->backlight.max); |
| |
| return hw_level; |
| } |
| |
| /* Scale hw_level in range [hw_min..hw_max] to [0..user_max]. */ |
| static u32 scale_hw_to_user(struct intel_connector *connector, |
| u32 hw_level, u32 user_max) |
| { |
| struct intel_panel *panel = &connector->panel; |
| |
| return scale(hw_level, panel->backlight.min, panel->backlight.max, |
| 0, user_max); |
| } |
| |
| u32 intel_backlight_invert_pwm_level(struct intel_connector *connector, u32 val) |
| { |
| struct intel_display *display = to_intel_display(connector); |
| struct intel_panel *panel = &connector->panel; |
| |
| drm_WARN_ON(display->drm, panel->backlight.pwm_level_max == 0); |
| |
| if (display->params.invert_brightness < 0) |
| return val; |
| |
| if (display->params.invert_brightness > 0 || |
| intel_has_quirk(display, QUIRK_INVERT_BRIGHTNESS)) { |
| return panel->backlight.pwm_level_max - val + panel->backlight.pwm_level_min; |
| } |
| |
| return val; |
| } |
| |
| void intel_backlight_set_pwm_level(const struct drm_connector_state *conn_state, u32 val) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| |
| drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] set backlight PWM = %d\n", |
| connector->base.base.id, connector->base.name, val); |
| panel->backlight.pwm_funcs->set(conn_state, val); |
| } |
| |
| u32 intel_backlight_level_to_pwm(struct intel_connector *connector, u32 val) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| |
| drm_WARN_ON_ONCE(&i915->drm, |
| panel->backlight.max == 0 || panel->backlight.pwm_level_max == 0); |
| |
| val = scale(val, panel->backlight.min, panel->backlight.max, |
| panel->backlight.pwm_level_min, panel->backlight.pwm_level_max); |
| |
| return intel_backlight_invert_pwm_level(connector, val); |
| } |
| |
| u32 intel_backlight_level_from_pwm(struct intel_connector *connector, u32 val) |
| { |
| struct intel_display *display = to_intel_display(connector); |
| struct intel_panel *panel = &connector->panel; |
| |
| drm_WARN_ON_ONCE(display->drm, |
| panel->backlight.max == 0 || panel->backlight.pwm_level_max == 0); |
| |
| if (display->params.invert_brightness > 0 || |
| (display->params.invert_brightness == 0 && |
| intel_has_quirk(display, QUIRK_INVERT_BRIGHTNESS))) |
| val = panel->backlight.pwm_level_max - (val - panel->backlight.pwm_level_min); |
| |
| return scale(val, panel->backlight.pwm_level_min, panel->backlight.pwm_level_max, |
| panel->backlight.min, panel->backlight.max); |
| } |
| |
| static u32 lpt_get_backlight(struct intel_connector *connector, enum pipe unused) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| |
| return intel_de_read(i915, BLC_PWM_PCH_CTL2) & BACKLIGHT_DUTY_CYCLE_MASK; |
| } |
| |
| static u32 pch_get_backlight(struct intel_connector *connector, enum pipe unused) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| |
| return intel_de_read(i915, BLC_PWM_CPU_CTL) & BACKLIGHT_DUTY_CYCLE_MASK; |
| } |
| |
| static u32 i9xx_get_backlight(struct intel_connector *connector, enum pipe unused) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| u32 val; |
| |
| val = intel_de_read(i915, BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK; |
| if (DISPLAY_VER(i915) < 4) |
| val >>= 1; |
| |
| if (panel->backlight.combination_mode) { |
| u8 lbpc; |
| |
| pci_read_config_byte(to_pci_dev(i915->drm.dev), LBPC, &lbpc); |
| val *= lbpc; |
| } |
| |
| return val; |
| } |
| |
| static u32 vlv_get_backlight(struct intel_connector *connector, enum pipe pipe) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| |
| if (drm_WARN_ON(&i915->drm, pipe != PIPE_A && pipe != PIPE_B)) |
| return 0; |
| |
| return intel_de_read(i915, VLV_BLC_PWM_CTL(pipe)) & BACKLIGHT_DUTY_CYCLE_MASK; |
| } |
| |
| static u32 bxt_get_backlight(struct intel_connector *connector, enum pipe unused) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| |
| return intel_de_read(i915, BXT_BLC_PWM_DUTY(panel->backlight.controller)); |
| } |
| |
| static u32 ext_pwm_get_backlight(struct intel_connector *connector, enum pipe unused) |
| { |
| struct intel_panel *panel = &connector->panel; |
| struct pwm_state state; |
| |
| pwm_get_state(panel->backlight.pwm, &state); |
| return pwm_get_relative_duty_cycle(&state, 100); |
| } |
| |
| static void lpt_set_backlight(const struct drm_connector_state *conn_state, u32 level) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| u32 val; |
| |
| val = intel_de_read(i915, BLC_PWM_PCH_CTL2) & ~BACKLIGHT_DUTY_CYCLE_MASK; |
| intel_de_write(i915, BLC_PWM_PCH_CTL2, val | level); |
| } |
| |
| static void pch_set_backlight(const struct drm_connector_state *conn_state, u32 level) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| u32 tmp; |
| |
| tmp = intel_de_read(i915, BLC_PWM_CPU_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK; |
| intel_de_write(i915, BLC_PWM_CPU_CTL, tmp | level); |
| } |
| |
| static void i9xx_set_backlight(const struct drm_connector_state *conn_state, u32 level) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| u32 tmp, mask; |
| |
| drm_WARN_ON(&i915->drm, panel->backlight.pwm_level_max == 0); |
| |
| if (panel->backlight.combination_mode) { |
| u8 lbpc; |
| |
| lbpc = level * 0xfe / panel->backlight.pwm_level_max + 1; |
| level /= lbpc; |
| pci_write_config_byte(to_pci_dev(i915->drm.dev), LBPC, lbpc); |
| } |
| |
| if (DISPLAY_VER(i915) == 4) { |
| mask = BACKLIGHT_DUTY_CYCLE_MASK; |
| } else { |
| level <<= 1; |
| mask = BACKLIGHT_DUTY_CYCLE_MASK_PNV; |
| } |
| |
| tmp = intel_de_read(i915, BLC_PWM_CTL) & ~mask; |
| intel_de_write(i915, BLC_PWM_CTL, tmp | level); |
| } |
| |
| static void vlv_set_backlight(const struct drm_connector_state *conn_state, u32 level) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| enum pipe pipe = to_intel_crtc(conn_state->crtc)->pipe; |
| u32 tmp; |
| |
| tmp = intel_de_read(i915, VLV_BLC_PWM_CTL(pipe)) & ~BACKLIGHT_DUTY_CYCLE_MASK; |
| intel_de_write(i915, VLV_BLC_PWM_CTL(pipe), tmp | level); |
| } |
| |
| static void bxt_set_backlight(const struct drm_connector_state *conn_state, u32 level) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| |
| intel_de_write(i915, BXT_BLC_PWM_DUTY(panel->backlight.controller), level); |
| } |
| |
| static void ext_pwm_set_backlight(const struct drm_connector_state *conn_state, u32 level) |
| { |
| struct intel_panel *panel = &to_intel_connector(conn_state->connector)->panel; |
| |
| pwm_set_relative_duty_cycle(&panel->backlight.pwm_state, level, 100); |
| pwm_apply_might_sleep(panel->backlight.pwm, &panel->backlight.pwm_state); |
| } |
| |
| static void |
| intel_panel_actually_set_backlight(const struct drm_connector_state *conn_state, u32 level) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| |
| drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] set backlight level = %d\n", |
| connector->base.base.id, connector->base.name, level); |
| |
| panel->backlight.funcs->set(conn_state, level); |
| } |
| |
| /* set backlight brightness to level in range [0..max], assuming hw min is |
| * respected. |
| */ |
| void intel_backlight_set_acpi(const struct drm_connector_state *conn_state, |
| u32 user_level, u32 user_max) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| u32 hw_level; |
| |
| /* |
| * Lack of crtc may occur during driver init because |
| * connection_mutex isn't held across the entire backlight |
| * setup + modeset readout, and the BIOS can issue the |
| * requests at any time. |
| */ |
| if (!panel->backlight.present || !conn_state->crtc) |
| return; |
| |
| mutex_lock(&i915->display.backlight.lock); |
| |
| drm_WARN_ON(&i915->drm, panel->backlight.max == 0); |
| |
| hw_level = clamp_user_to_hw(connector, user_level, user_max); |
| panel->backlight.level = hw_level; |
| |
| if (panel->backlight.device) |
| panel->backlight.device->props.brightness = |
| scale_hw_to_user(connector, |
| panel->backlight.level, |
| panel->backlight.device->props.max_brightness); |
| |
| if (panel->backlight.enabled) |
| intel_panel_actually_set_backlight(conn_state, hw_level); |
| |
| mutex_unlock(&i915->display.backlight.lock); |
| } |
| |
| static void lpt_disable_backlight(const struct drm_connector_state *old_conn_state, u32 level) |
| { |
| struct intel_connector *connector = to_intel_connector(old_conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| u32 tmp; |
| |
| intel_backlight_set_pwm_level(old_conn_state, level); |
| |
| /* |
| * Although we don't support or enable CPU PWM with LPT/SPT based |
| * systems, it may have been enabled prior to loading the |
| * driver. Disable to avoid warnings on LCPLL disable. |
| * |
| * This needs rework if we need to add support for CPU PWM on PCH split |
| * platforms. |
| */ |
| tmp = intel_de_read(i915, BLC_PWM_CPU_CTL2); |
| if (tmp & BLM_PWM_ENABLE) { |
| drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] CPU backlight was enabled, disabling\n", |
| connector->base.base.id, connector->base.name); |
| intel_de_write(i915, BLC_PWM_CPU_CTL2, tmp & ~BLM_PWM_ENABLE); |
| } |
| |
| intel_de_rmw(i915, BLC_PWM_PCH_CTL1, BLM_PCH_PWM_ENABLE, 0); |
| } |
| |
| static void pch_disable_backlight(const struct drm_connector_state *old_conn_state, u32 val) |
| { |
| struct intel_connector *connector = to_intel_connector(old_conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| |
| intel_backlight_set_pwm_level(old_conn_state, val); |
| |
| intel_de_rmw(i915, BLC_PWM_CPU_CTL2, BLM_PWM_ENABLE, 0); |
| |
| intel_de_rmw(i915, BLC_PWM_PCH_CTL1, BLM_PCH_PWM_ENABLE, 0); |
| } |
| |
| static void i9xx_disable_backlight(const struct drm_connector_state *old_conn_state, u32 val) |
| { |
| intel_backlight_set_pwm_level(old_conn_state, val); |
| } |
| |
| static void i965_disable_backlight(const struct drm_connector_state *old_conn_state, u32 val) |
| { |
| struct drm_i915_private *i915 = to_i915(old_conn_state->connector->dev); |
| |
| intel_backlight_set_pwm_level(old_conn_state, val); |
| |
| intel_de_rmw(i915, BLC_PWM_CTL2, BLM_PWM_ENABLE, 0); |
| } |
| |
| static void vlv_disable_backlight(const struct drm_connector_state *old_conn_state, u32 val) |
| { |
| struct intel_connector *connector = to_intel_connector(old_conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| enum pipe pipe = to_intel_crtc(old_conn_state->crtc)->pipe; |
| |
| intel_backlight_set_pwm_level(old_conn_state, val); |
| |
| intel_de_rmw(i915, VLV_BLC_PWM_CTL2(pipe), BLM_PWM_ENABLE, 0); |
| } |
| |
| static void bxt_disable_backlight(const struct drm_connector_state *old_conn_state, u32 val) |
| { |
| struct intel_connector *connector = to_intel_connector(old_conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| |
| intel_backlight_set_pwm_level(old_conn_state, val); |
| |
| intel_de_rmw(i915, BXT_BLC_PWM_CTL(panel->backlight.controller), |
| BXT_BLC_PWM_ENABLE, 0); |
| |
| if (panel->backlight.controller == 1) |
| intel_de_rmw(i915, UTIL_PIN_CTL, UTIL_PIN_ENABLE, 0); |
| } |
| |
| static void cnp_disable_backlight(const struct drm_connector_state *old_conn_state, u32 val) |
| { |
| struct intel_connector *connector = to_intel_connector(old_conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| |
| intel_backlight_set_pwm_level(old_conn_state, val); |
| |
| intel_de_rmw(i915, BXT_BLC_PWM_CTL(panel->backlight.controller), |
| BXT_BLC_PWM_ENABLE, 0); |
| } |
| |
| static void ext_pwm_disable_backlight(const struct drm_connector_state *old_conn_state, u32 level) |
| { |
| struct intel_connector *connector = to_intel_connector(old_conn_state->connector); |
| struct intel_panel *panel = &connector->panel; |
| |
| intel_backlight_set_pwm_level(old_conn_state, level); |
| |
| panel->backlight.pwm_state.enabled = false; |
| pwm_apply_might_sleep(panel->backlight.pwm, &panel->backlight.pwm_state); |
| } |
| |
| void intel_backlight_disable(const struct drm_connector_state *old_conn_state) |
| { |
| struct intel_connector *connector = to_intel_connector(old_conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| |
| if (!panel->backlight.present) |
| return; |
| |
| /* |
| * Do not disable backlight on the vga_switcheroo path. When switching |
| * away from i915, the other client may depend on i915 to handle the |
| * backlight. This will leave the backlight on unnecessarily when |
| * another client is not activated. |
| */ |
| if (i915->drm.switch_power_state == DRM_SWITCH_POWER_CHANGING) { |
| drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] Skipping backlight disable on vga switch\n", |
| connector->base.base.id, connector->base.name); |
| return; |
| } |
| |
| mutex_lock(&i915->display.backlight.lock); |
| |
| if (panel->backlight.device) |
| panel->backlight.device->props.power = FB_BLANK_POWERDOWN; |
| panel->backlight.enabled = false; |
| panel->backlight.funcs->disable(old_conn_state, 0); |
| |
| mutex_unlock(&i915->display.backlight.lock); |
| } |
| |
| static void lpt_enable_backlight(const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state, u32 level) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| u32 pch_ctl1, pch_ctl2; |
| |
| pch_ctl1 = intel_de_read(i915, BLC_PWM_PCH_CTL1); |
| if (pch_ctl1 & BLM_PCH_PWM_ENABLE) { |
| drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] PCH backlight already enabled\n", |
| connector->base.base.id, connector->base.name); |
| pch_ctl1 &= ~BLM_PCH_PWM_ENABLE; |
| intel_de_write(i915, BLC_PWM_PCH_CTL1, pch_ctl1); |
| } |
| |
| if (HAS_PCH_LPT(i915)) |
| intel_de_rmw(i915, SOUTH_CHICKEN2, LPT_PWM_GRANULARITY, |
| panel->backlight.alternate_pwm_increment ? |
| LPT_PWM_GRANULARITY : 0); |
| else |
| intel_de_rmw(i915, SOUTH_CHICKEN1, SPT_PWM_GRANULARITY, |
| panel->backlight.alternate_pwm_increment ? |
| SPT_PWM_GRANULARITY : 0); |
| |
| pch_ctl2 = panel->backlight.pwm_level_max << 16; |
| intel_de_write(i915, BLC_PWM_PCH_CTL2, pch_ctl2); |
| |
| pch_ctl1 = 0; |
| if (panel->backlight.active_low_pwm) |
| pch_ctl1 |= BLM_PCH_POLARITY; |
| |
| /* After LPT, override is the default. */ |
| if (HAS_PCH_LPT(i915)) |
| pch_ctl1 |= BLM_PCH_OVERRIDE_ENABLE; |
| |
| intel_de_write(i915, BLC_PWM_PCH_CTL1, pch_ctl1); |
| intel_de_posting_read(i915, BLC_PWM_PCH_CTL1); |
| intel_de_write(i915, BLC_PWM_PCH_CTL1, pch_ctl1 | BLM_PCH_PWM_ENABLE); |
| |
| /* This won't stick until the above enable. */ |
| intel_backlight_set_pwm_level(conn_state, level); |
| } |
| |
| static void pch_enable_backlight(const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state, u32 level) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| u32 cpu_ctl2, pch_ctl1, pch_ctl2; |
| |
| cpu_ctl2 = intel_de_read(i915, BLC_PWM_CPU_CTL2); |
| if (cpu_ctl2 & BLM_PWM_ENABLE) { |
| drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] CPU backlight already enabled\n", |
| connector->base.base.id, connector->base.name); |
| cpu_ctl2 &= ~BLM_PWM_ENABLE; |
| intel_de_write(i915, BLC_PWM_CPU_CTL2, cpu_ctl2); |
| } |
| |
| pch_ctl1 = intel_de_read(i915, BLC_PWM_PCH_CTL1); |
| if (pch_ctl1 & BLM_PCH_PWM_ENABLE) { |
| drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] PCH backlight already enabled\n", |
| connector->base.base.id, connector->base.name); |
| pch_ctl1 &= ~BLM_PCH_PWM_ENABLE; |
| intel_de_write(i915, BLC_PWM_PCH_CTL1, pch_ctl1); |
| } |
| |
| if (cpu_transcoder == TRANSCODER_EDP) |
| cpu_ctl2 = BLM_TRANSCODER_EDP; |
| else |
| cpu_ctl2 = BLM_PIPE(cpu_transcoder); |
| intel_de_write(i915, BLC_PWM_CPU_CTL2, cpu_ctl2); |
| intel_de_posting_read(i915, BLC_PWM_CPU_CTL2); |
| intel_de_write(i915, BLC_PWM_CPU_CTL2, cpu_ctl2 | BLM_PWM_ENABLE); |
| |
| /* This won't stick until the above enable. */ |
| intel_backlight_set_pwm_level(conn_state, level); |
| |
| pch_ctl2 = panel->backlight.pwm_level_max << 16; |
| intel_de_write(i915, BLC_PWM_PCH_CTL2, pch_ctl2); |
| |
| pch_ctl1 = 0; |
| if (panel->backlight.active_low_pwm) |
| pch_ctl1 |= BLM_PCH_POLARITY; |
| |
| intel_de_write(i915, BLC_PWM_PCH_CTL1, pch_ctl1); |
| intel_de_posting_read(i915, BLC_PWM_PCH_CTL1); |
| intel_de_write(i915, BLC_PWM_PCH_CTL1, pch_ctl1 | BLM_PCH_PWM_ENABLE); |
| } |
| |
| static void i9xx_enable_backlight(const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state, u32 level) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| u32 ctl, freq; |
| |
| ctl = intel_de_read(i915, BLC_PWM_CTL); |
| if (ctl & BACKLIGHT_DUTY_CYCLE_MASK_PNV) { |
| drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] backlight already enabled\n", |
| connector->base.base.id, connector->base.name); |
| intel_de_write(i915, BLC_PWM_CTL, 0); |
| } |
| |
| freq = panel->backlight.pwm_level_max; |
| if (panel->backlight.combination_mode) |
| freq /= 0xff; |
| |
| ctl = freq << 17; |
| if (panel->backlight.combination_mode) |
| ctl |= BLM_LEGACY_MODE; |
| if (IS_PINEVIEW(i915) && panel->backlight.active_low_pwm) |
| ctl |= BLM_POLARITY_PNV; |
| |
| intel_de_write(i915, BLC_PWM_CTL, ctl); |
| intel_de_posting_read(i915, BLC_PWM_CTL); |
| |
| /* XXX: combine this into above write? */ |
| intel_backlight_set_pwm_level(conn_state, level); |
| |
| /* |
| * Needed to enable backlight on some 855gm models. BLC_HIST_CTL is |
| * 855gm only, but checking for gen2 is safe, as 855gm is the only gen2 |
| * that has backlight. |
| */ |
| if (DISPLAY_VER(i915) == 2) |
| intel_de_write(i915, BLC_HIST_CTL, BLM_HISTOGRAM_ENABLE); |
| } |
| |
| static void i965_enable_backlight(const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state, u32 level) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| enum pipe pipe = to_intel_crtc(conn_state->crtc)->pipe; |
| u32 ctl, ctl2, freq; |
| |
| ctl2 = intel_de_read(i915, BLC_PWM_CTL2); |
| if (ctl2 & BLM_PWM_ENABLE) { |
| drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] backlight already enabled\n", |
| connector->base.base.id, connector->base.name); |
| ctl2 &= ~BLM_PWM_ENABLE; |
| intel_de_write(i915, BLC_PWM_CTL2, ctl2); |
| } |
| |
| freq = panel->backlight.pwm_level_max; |
| if (panel->backlight.combination_mode) |
| freq /= 0xff; |
| |
| ctl = freq << 16; |
| intel_de_write(i915, BLC_PWM_CTL, ctl); |
| |
| ctl2 = BLM_PIPE(pipe); |
| if (panel->backlight.combination_mode) |
| ctl2 |= BLM_COMBINATION_MODE; |
| if (panel->backlight.active_low_pwm) |
| ctl2 |= BLM_POLARITY_I965; |
| intel_de_write(i915, BLC_PWM_CTL2, ctl2); |
| intel_de_posting_read(i915, BLC_PWM_CTL2); |
| intel_de_write(i915, BLC_PWM_CTL2, ctl2 | BLM_PWM_ENABLE); |
| |
| intel_backlight_set_pwm_level(conn_state, level); |
| } |
| |
| static void vlv_enable_backlight(const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state, u32 level) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| enum pipe pipe = to_intel_crtc(crtc_state->uapi.crtc)->pipe; |
| u32 ctl, ctl2; |
| |
| ctl2 = intel_de_read(i915, VLV_BLC_PWM_CTL2(pipe)); |
| if (ctl2 & BLM_PWM_ENABLE) { |
| drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] backlight already enabled\n", |
| connector->base.base.id, connector->base.name); |
| ctl2 &= ~BLM_PWM_ENABLE; |
| intel_de_write(i915, VLV_BLC_PWM_CTL2(pipe), ctl2); |
| } |
| |
| ctl = panel->backlight.pwm_level_max << 16; |
| intel_de_write(i915, VLV_BLC_PWM_CTL(pipe), ctl); |
| |
| /* XXX: combine this into above write? */ |
| intel_backlight_set_pwm_level(conn_state, level); |
| |
| ctl2 = 0; |
| if (panel->backlight.active_low_pwm) |
| ctl2 |= BLM_POLARITY_I965; |
| intel_de_write(i915, VLV_BLC_PWM_CTL2(pipe), ctl2); |
| intel_de_posting_read(i915, VLV_BLC_PWM_CTL2(pipe)); |
| intel_de_write(i915, VLV_BLC_PWM_CTL2(pipe), ctl2 | BLM_PWM_ENABLE); |
| } |
| |
| static void bxt_enable_backlight(const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state, u32 level) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| enum pipe pipe = to_intel_crtc(crtc_state->uapi.crtc)->pipe; |
| u32 pwm_ctl, val; |
| |
| /* Controller 1 uses the utility pin. */ |
| if (panel->backlight.controller == 1) { |
| val = intel_de_read(i915, UTIL_PIN_CTL); |
| if (val & UTIL_PIN_ENABLE) { |
| drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] utility pin already enabled\n", |
| connector->base.base.id, connector->base.name); |
| val &= ~UTIL_PIN_ENABLE; |
| intel_de_write(i915, UTIL_PIN_CTL, val); |
| } |
| |
| val = 0; |
| if (panel->backlight.util_pin_active_low) |
| val |= UTIL_PIN_POLARITY; |
| intel_de_write(i915, UTIL_PIN_CTL, |
| val | UTIL_PIN_PIPE(pipe) | UTIL_PIN_MODE_PWM | UTIL_PIN_ENABLE); |
| } |
| |
| pwm_ctl = intel_de_read(i915, BXT_BLC_PWM_CTL(panel->backlight.controller)); |
| if (pwm_ctl & BXT_BLC_PWM_ENABLE) { |
| drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] backlight already enabled\n", |
| connector->base.base.id, connector->base.name); |
| pwm_ctl &= ~BXT_BLC_PWM_ENABLE; |
| intel_de_write(i915, BXT_BLC_PWM_CTL(panel->backlight.controller), |
| pwm_ctl); |
| } |
| |
| intel_de_write(i915, BXT_BLC_PWM_FREQ(panel->backlight.controller), |
| panel->backlight.pwm_level_max); |
| |
| intel_backlight_set_pwm_level(conn_state, level); |
| |
| pwm_ctl = 0; |
| if (panel->backlight.active_low_pwm) |
| pwm_ctl |= BXT_BLC_PWM_POLARITY; |
| |
| intel_de_write(i915, BXT_BLC_PWM_CTL(panel->backlight.controller), pwm_ctl); |
| intel_de_posting_read(i915, BXT_BLC_PWM_CTL(panel->backlight.controller)); |
| intel_de_write(i915, BXT_BLC_PWM_CTL(panel->backlight.controller), |
| pwm_ctl | BXT_BLC_PWM_ENABLE); |
| } |
| |
| static void cnp_enable_backlight(const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state, u32 level) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| u32 pwm_ctl; |
| |
| pwm_ctl = intel_de_read(i915, BXT_BLC_PWM_CTL(panel->backlight.controller)); |
| if (pwm_ctl & BXT_BLC_PWM_ENABLE) { |
| drm_dbg_kms(&i915->drm, "backlight already enabled\n"); |
| pwm_ctl &= ~BXT_BLC_PWM_ENABLE; |
| intel_de_write(i915, BXT_BLC_PWM_CTL(panel->backlight.controller), |
| pwm_ctl); |
| } |
| |
| intel_de_write(i915, BXT_BLC_PWM_FREQ(panel->backlight.controller), |
| panel->backlight.pwm_level_max); |
| |
| intel_backlight_set_pwm_level(conn_state, level); |
| |
| pwm_ctl = 0; |
| if (panel->backlight.active_low_pwm) |
| pwm_ctl |= BXT_BLC_PWM_POLARITY; |
| |
| intel_de_write(i915, BXT_BLC_PWM_CTL(panel->backlight.controller), pwm_ctl); |
| intel_de_posting_read(i915, BXT_BLC_PWM_CTL(panel->backlight.controller)); |
| intel_de_write(i915, BXT_BLC_PWM_CTL(panel->backlight.controller), |
| pwm_ctl | BXT_BLC_PWM_ENABLE); |
| } |
| |
| static void ext_pwm_enable_backlight(const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state, u32 level) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct intel_panel *panel = &connector->panel; |
| |
| pwm_set_relative_duty_cycle(&panel->backlight.pwm_state, level, 100); |
| panel->backlight.pwm_state.enabled = true; |
| pwm_apply_might_sleep(panel->backlight.pwm, &panel->backlight.pwm_state); |
| } |
| |
| static void __intel_backlight_enable(const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct intel_panel *panel = &connector->panel; |
| |
| WARN_ON(panel->backlight.max == 0); |
| |
| if (panel->backlight.level < panel->backlight.min) { |
| panel->backlight.level = panel->backlight.min; |
| if (panel->backlight.device) |
| panel->backlight.device->props.brightness = |
| scale_hw_to_user(connector, |
| panel->backlight.level, |
| panel->backlight.device->props.max_brightness); |
| } |
| |
| panel->backlight.funcs->enable(crtc_state, conn_state, panel->backlight.level); |
| panel->backlight.enabled = true; |
| if (panel->backlight.device) |
| panel->backlight.device->props.power = FB_BLANK_UNBLANK; |
| } |
| |
| void intel_backlight_enable(const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| enum pipe pipe = to_intel_crtc(crtc_state->uapi.crtc)->pipe; |
| |
| if (!panel->backlight.present) |
| return; |
| |
| drm_dbg_kms(&i915->drm, "pipe %c\n", pipe_name(pipe)); |
| |
| mutex_lock(&i915->display.backlight.lock); |
| |
| __intel_backlight_enable(crtc_state, conn_state); |
| |
| mutex_unlock(&i915->display.backlight.lock); |
| } |
| |
| #if IS_ENABLED(CONFIG_BACKLIGHT_CLASS_DEVICE) |
| static u32 intel_panel_get_backlight(struct intel_connector *connector) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| u32 val = 0; |
| |
| mutex_lock(&i915->display.backlight.lock); |
| |
| if (panel->backlight.enabled) |
| val = panel->backlight.funcs->get(connector, intel_connector_get_pipe(connector)); |
| |
| mutex_unlock(&i915->display.backlight.lock); |
| |
| drm_dbg_kms(&i915->drm, "get backlight PWM = %d\n", val); |
| return val; |
| } |
| |
| /* Scale user_level in range [0..user_max] to [hw_min..hw_max]. */ |
| static u32 scale_user_to_hw(struct intel_connector *connector, |
| u32 user_level, u32 user_max) |
| { |
| struct intel_panel *panel = &connector->panel; |
| |
| return scale(user_level, 0, user_max, |
| panel->backlight.min, panel->backlight.max); |
| } |
| |
| /* set backlight brightness to level in range [0..max], scaling wrt hw min */ |
| static void intel_panel_set_backlight(const struct drm_connector_state *conn_state, |
| u32 user_level, u32 user_max) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| u32 hw_level; |
| |
| if (!panel->backlight.present) |
| return; |
| |
| mutex_lock(&i915->display.backlight.lock); |
| |
| drm_WARN_ON(&i915->drm, panel->backlight.max == 0); |
| |
| hw_level = scale_user_to_hw(connector, user_level, user_max); |
| panel->backlight.level = hw_level; |
| |
| if (panel->backlight.enabled) |
| intel_panel_actually_set_backlight(conn_state, hw_level); |
| |
| mutex_unlock(&i915->display.backlight.lock); |
| } |
| |
| static int intel_backlight_device_update_status(struct backlight_device *bd) |
| { |
| struct intel_connector *connector = bl_get_data(bd); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| |
| drm_modeset_lock(&i915->drm.mode_config.connection_mutex, NULL); |
| |
| drm_dbg_kms(&i915->drm, "updating intel_backlight, brightness=%d/%d\n", |
| bd->props.brightness, bd->props.max_brightness); |
| intel_panel_set_backlight(connector->base.state, bd->props.brightness, |
| bd->props.max_brightness); |
| |
| /* |
| * Allow flipping bl_power as a sub-state of enabled. Sadly the |
| * backlight class device does not make it easy to differentiate |
| * between callbacks for brightness and bl_power, so our backlight_power |
| * callback needs to take this into account. |
| */ |
| if (panel->backlight.enabled) { |
| if (panel->backlight.power) { |
| bool enable = bd->props.power == FB_BLANK_UNBLANK && |
| bd->props.brightness != 0; |
| panel->backlight.power(connector, enable); |
| } |
| } else { |
| bd->props.power = FB_BLANK_POWERDOWN; |
| } |
| |
| drm_modeset_unlock(&i915->drm.mode_config.connection_mutex); |
| |
| return 0; |
| } |
| |
| static int intel_backlight_device_get_brightness(struct backlight_device *bd) |
| { |
| struct intel_connector *connector = bl_get_data(bd); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| intel_wakeref_t wakeref; |
| int ret = 0; |
| |
| with_intel_runtime_pm(&i915->runtime_pm, wakeref) { |
| u32 hw_level; |
| |
| drm_modeset_lock(&i915->drm.mode_config.connection_mutex, NULL); |
| |
| hw_level = intel_panel_get_backlight(connector); |
| ret = scale_hw_to_user(connector, |
| hw_level, bd->props.max_brightness); |
| |
| drm_modeset_unlock(&i915->drm.mode_config.connection_mutex); |
| } |
| |
| return ret; |
| } |
| |
| static const struct backlight_ops intel_backlight_device_ops = { |
| .update_status = intel_backlight_device_update_status, |
| .get_brightness = intel_backlight_device_get_brightness, |
| }; |
| |
| int intel_backlight_device_register(struct intel_connector *connector) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| struct backlight_properties props; |
| struct backlight_device *bd; |
| const char *name; |
| int ret = 0; |
| |
| if (WARN_ON(panel->backlight.device)) |
| return -ENODEV; |
| |
| if (!panel->backlight.present) |
| return 0; |
| |
| WARN_ON(panel->backlight.max == 0); |
| |
| if (!acpi_video_backlight_use_native()) { |
| drm_info(&i915->drm, "Skipping intel_backlight registration\n"); |
| return 0; |
| } |
| |
| memset(&props, 0, sizeof(props)); |
| props.type = BACKLIGHT_RAW; |
| |
| /* |
| * Note: Everything should work even if the backlight device max |
| * presented to the userspace is arbitrarily chosen. |
| */ |
| props.max_brightness = panel->backlight.max; |
| props.brightness = scale_hw_to_user(connector, |
| panel->backlight.level, |
| props.max_brightness); |
| |
| if (panel->backlight.enabled) |
| props.power = FB_BLANK_UNBLANK; |
| else |
| props.power = FB_BLANK_POWERDOWN; |
| |
| name = kstrdup_const("intel_backlight", GFP_KERNEL); |
| if (!name) |
| return -ENOMEM; |
| |
| bd = backlight_device_get_by_name(name); |
| if (bd) { |
| put_device(&bd->dev); |
| /* |
| * Using the same name independent of the drm device or connector |
| * prevents registration of multiple backlight devices in the |
| * driver. However, we need to use the default name for backward |
| * compatibility. Use unique names for subsequent backlight devices as a |
| * fallback when the default name already exists. |
| */ |
| kfree_const(name); |
| name = kasprintf(GFP_KERNEL, "card%d-%s-backlight", |
| i915->drm.primary->index, connector->base.name); |
| if (!name) |
| return -ENOMEM; |
| } |
| bd = backlight_device_register(name, connector->base.kdev, connector, |
| &intel_backlight_device_ops, &props); |
| |
| if (IS_ERR(bd)) { |
| drm_err(&i915->drm, |
| "[CONNECTOR:%d:%s] backlight device %s register failed: %ld\n", |
| connector->base.base.id, connector->base.name, name, PTR_ERR(bd)); |
| ret = PTR_ERR(bd); |
| goto out; |
| } |
| |
| panel->backlight.device = bd; |
| |
| drm_dbg_kms(&i915->drm, |
| "[CONNECTOR:%d:%s] backlight device %s registered\n", |
| connector->base.base.id, connector->base.name, name); |
| |
| out: |
| kfree_const(name); |
| |
| return ret; |
| } |
| |
| void intel_backlight_device_unregister(struct intel_connector *connector) |
| { |
| struct intel_panel *panel = &connector->panel; |
| |
| if (panel->backlight.device) { |
| backlight_device_unregister(panel->backlight.device); |
| panel->backlight.device = NULL; |
| } |
| } |
| #endif /* CONFIG_BACKLIGHT_CLASS_DEVICE */ |
| |
| /* |
| * CNP: PWM clock frequency is 19.2 MHz or 24 MHz. |
| * PWM increment = 1 |
| */ |
| static u32 cnp_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| |
| return DIV_ROUND_CLOSEST(KHz(RUNTIME_INFO(i915)->rawclk_freq), |
| pwm_freq_hz); |
| } |
| |
| /* |
| * BXT: PWM clock frequency = 19.2 MHz. |
| */ |
| static u32 bxt_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz) |
| { |
| return DIV_ROUND_CLOSEST(KHz(19200), pwm_freq_hz); |
| } |
| |
| /* |
| * SPT: This value represents the period of the PWM stream in clock periods |
| * multiplied by 16 (default increment) or 128 (alternate increment selected in |
| * SCHICKEN_1 bit 0). PWM clock is 24 MHz. |
| */ |
| static u32 spt_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz) |
| { |
| struct intel_panel *panel = &connector->panel; |
| u32 mul; |
| |
| if (panel->backlight.alternate_pwm_increment) |
| mul = 128; |
| else |
| mul = 16; |
| |
| return DIV_ROUND_CLOSEST(MHz(24), pwm_freq_hz * mul); |
| } |
| |
| /* |
| * LPT: This value represents the period of the PWM stream in clock periods |
| * multiplied by 128 (default increment) or 16 (alternate increment, selected in |
| * LPT SOUTH_CHICKEN2 register bit 5). |
| */ |
| static u32 lpt_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| u32 mul, clock; |
| |
| if (panel->backlight.alternate_pwm_increment) |
| mul = 16; |
| else |
| mul = 128; |
| |
| if (HAS_PCH_LPT_H(i915)) |
| clock = MHz(135); /* LPT:H */ |
| else |
| clock = MHz(24); /* LPT:LP */ |
| |
| return DIV_ROUND_CLOSEST(clock, pwm_freq_hz * mul); |
| } |
| |
| /* |
| * ILK/SNB/IVB: This value represents the period of the PWM stream in PCH |
| * display raw clocks multiplied by 128. |
| */ |
| static u32 pch_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| |
| return DIV_ROUND_CLOSEST(KHz(RUNTIME_INFO(i915)->rawclk_freq), |
| pwm_freq_hz * 128); |
| } |
| |
| /* |
| * Gen2: This field determines the number of time base events (display core |
| * clock frequency/32) in total for a complete cycle of modulated backlight |
| * control. |
| * |
| * Gen3: A time base event equals the display core clock ([DevPNV] HRAW clock) |
| * divided by 32. |
| */ |
| static u32 i9xx_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| int clock; |
| |
| if (IS_PINEVIEW(i915)) |
| clock = KHz(RUNTIME_INFO(i915)->rawclk_freq); |
| else |
| clock = KHz(i915->display.cdclk.hw.cdclk); |
| |
| return DIV_ROUND_CLOSEST(clock, pwm_freq_hz * 32); |
| } |
| |
| /* |
| * Gen4: This value represents the period of the PWM stream in display core |
| * clocks ([DevCTG] HRAW clocks) multiplied by 128. |
| * |
| */ |
| static u32 i965_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| int clock; |
| |
| if (IS_G4X(i915)) |
| clock = KHz(RUNTIME_INFO(i915)->rawclk_freq); |
| else |
| clock = KHz(i915->display.cdclk.hw.cdclk); |
| |
| return DIV_ROUND_CLOSEST(clock, pwm_freq_hz * 128); |
| } |
| |
| /* |
| * VLV: This value represents the period of the PWM stream in display core |
| * clocks ([DevCTG] 200MHz HRAW clocks) multiplied by 128 or 25MHz S0IX clocks |
| * multiplied by 16. CHV uses a 19.2MHz S0IX clock. |
| */ |
| static u32 vlv_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| int mul, clock; |
| |
| if ((intel_de_read(i915, CBR1_VLV) & CBR_PWM_CLOCK_MUX_SELECT) == 0) { |
| if (IS_CHERRYVIEW(i915)) |
| clock = KHz(19200); |
| else |
| clock = MHz(25); |
| mul = 16; |
| } else { |
| clock = KHz(RUNTIME_INFO(i915)->rawclk_freq); |
| mul = 128; |
| } |
| |
| return DIV_ROUND_CLOSEST(clock, pwm_freq_hz * mul); |
| } |
| |
| static u16 get_vbt_pwm_freq(struct intel_connector *connector) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| u16 pwm_freq_hz = connector->panel.vbt.backlight.pwm_freq_hz; |
| |
| if (pwm_freq_hz) { |
| drm_dbg_kms(&i915->drm, |
| "VBT defined backlight frequency %u Hz\n", |
| pwm_freq_hz); |
| } else { |
| pwm_freq_hz = 200; |
| drm_dbg_kms(&i915->drm, |
| "default backlight frequency %u Hz\n", |
| pwm_freq_hz); |
| } |
| |
| return pwm_freq_hz; |
| } |
| |
| static u32 get_backlight_max_vbt(struct intel_connector *connector) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| u16 pwm_freq_hz = get_vbt_pwm_freq(connector); |
| u32 pwm; |
| |
| if (!panel->backlight.pwm_funcs->hz_to_pwm) { |
| drm_dbg_kms(&i915->drm, |
| "backlight frequency conversion not supported\n"); |
| return 0; |
| } |
| |
| pwm = panel->backlight.pwm_funcs->hz_to_pwm(connector, pwm_freq_hz); |
| if (!pwm) { |
| drm_dbg_kms(&i915->drm, |
| "backlight frequency conversion failed\n"); |
| return 0; |
| } |
| |
| return pwm; |
| } |
| |
| /* |
| * Note: The setup hooks can't assume pipe is set! |
| */ |
| static u32 get_backlight_min_vbt(struct intel_connector *connector) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| int min; |
| |
| drm_WARN_ON(&i915->drm, panel->backlight.pwm_level_max == 0); |
| |
| /* |
| * XXX: If the vbt value is 255, it makes min equal to max, which leads |
| * to problems. There are such machines out there. Either our |
| * interpretation is wrong or the vbt has bogus data. Or both. Safeguard |
| * against this by letting the minimum be at most (arbitrarily chosen) |
| * 25% of the max. |
| */ |
| min = clamp_t(int, connector->panel.vbt.backlight.min_brightness, 0, 64); |
| if (min != connector->panel.vbt.backlight.min_brightness) { |
| drm_dbg_kms(&i915->drm, |
| "clamping VBT min backlight %d/255 to %d/255\n", |
| connector->panel.vbt.backlight.min_brightness, min); |
| } |
| |
| /* vbt value is a coefficient in range [0..255] */ |
| return scale(min, 0, 255, 0, panel->backlight.pwm_level_max); |
| } |
| |
| static int lpt_setup_backlight(struct intel_connector *connector, enum pipe unused) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| u32 cpu_ctl2, pch_ctl1, pch_ctl2, val; |
| bool alt, cpu_mode; |
| |
| if (HAS_PCH_LPT(i915)) |
| alt = intel_de_read(i915, SOUTH_CHICKEN2) & LPT_PWM_GRANULARITY; |
| else |
| alt = intel_de_read(i915, SOUTH_CHICKEN1) & SPT_PWM_GRANULARITY; |
| panel->backlight.alternate_pwm_increment = alt; |
| |
| pch_ctl1 = intel_de_read(i915, BLC_PWM_PCH_CTL1); |
| panel->backlight.active_low_pwm = pch_ctl1 & BLM_PCH_POLARITY; |
| |
| pch_ctl2 = intel_de_read(i915, BLC_PWM_PCH_CTL2); |
| panel->backlight.pwm_level_max = pch_ctl2 >> 16; |
| |
| cpu_ctl2 = intel_de_read(i915, BLC_PWM_CPU_CTL2); |
| |
| if (!panel->backlight.pwm_level_max) |
| panel->backlight.pwm_level_max = get_backlight_max_vbt(connector); |
| |
| if (!panel->backlight.pwm_level_max) |
| return -ENODEV; |
| |
| panel->backlight.pwm_level_min = get_backlight_min_vbt(connector); |
| |
| panel->backlight.pwm_enabled = pch_ctl1 & BLM_PCH_PWM_ENABLE; |
| |
| cpu_mode = panel->backlight.pwm_enabled && HAS_PCH_LPT(i915) && |
| !(pch_ctl1 & BLM_PCH_OVERRIDE_ENABLE) && |
| (cpu_ctl2 & BLM_PWM_ENABLE); |
| |
| if (cpu_mode) { |
| val = pch_get_backlight(connector, unused); |
| |
| drm_dbg_kms(&i915->drm, |
| "CPU backlight register was enabled, switching to PCH override\n"); |
| |
| /* Write converted CPU PWM value to PCH override register */ |
| lpt_set_backlight(connector->base.state, val); |
| intel_de_write(i915, BLC_PWM_PCH_CTL1, |
| pch_ctl1 | BLM_PCH_OVERRIDE_ENABLE); |
| |
| intel_de_write(i915, BLC_PWM_CPU_CTL2, |
| cpu_ctl2 & ~BLM_PWM_ENABLE); |
| } |
| |
| drm_dbg_kms(&i915->drm, |
| "[CONNECTOR:%d:%s] Using native PCH PWM for backlight control\n", |
| connector->base.base.id, connector->base.name); |
| |
| return 0; |
| } |
| |
| static int pch_setup_backlight(struct intel_connector *connector, enum pipe unused) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| u32 cpu_ctl2, pch_ctl1, pch_ctl2; |
| |
| pch_ctl1 = intel_de_read(i915, BLC_PWM_PCH_CTL1); |
| panel->backlight.active_low_pwm = pch_ctl1 & BLM_PCH_POLARITY; |
| |
| pch_ctl2 = intel_de_read(i915, BLC_PWM_PCH_CTL2); |
| panel->backlight.pwm_level_max = pch_ctl2 >> 16; |
| |
| if (!panel->backlight.pwm_level_max) |
| panel->backlight.pwm_level_max = get_backlight_max_vbt(connector); |
| |
| if (!panel->backlight.pwm_level_max) |
| return -ENODEV; |
| |
| panel->backlight.pwm_level_min = get_backlight_min_vbt(connector); |
| |
| cpu_ctl2 = intel_de_read(i915, BLC_PWM_CPU_CTL2); |
| panel->backlight.pwm_enabled = (cpu_ctl2 & BLM_PWM_ENABLE) && |
| (pch_ctl1 & BLM_PCH_PWM_ENABLE); |
| |
| drm_dbg_kms(&i915->drm, |
| "[CONNECTOR:%d:%s] Using native PCH PWM for backlight control\n", |
| connector->base.base.id, connector->base.name); |
| |
| return 0; |
| } |
| |
| static int i9xx_setup_backlight(struct intel_connector *connector, enum pipe unused) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| u32 ctl, val; |
| |
| ctl = intel_de_read(i915, BLC_PWM_CTL); |
| |
| if (DISPLAY_VER(i915) == 2 || IS_I915GM(i915) || IS_I945GM(i915)) |
| panel->backlight.combination_mode = ctl & BLM_LEGACY_MODE; |
| |
| if (IS_PINEVIEW(i915)) |
| panel->backlight.active_low_pwm = ctl & BLM_POLARITY_PNV; |
| |
| panel->backlight.pwm_level_max = ctl >> 17; |
| |
| if (!panel->backlight.pwm_level_max) { |
| panel->backlight.pwm_level_max = get_backlight_max_vbt(connector); |
| panel->backlight.pwm_level_max >>= 1; |
| } |
| |
| if (!panel->backlight.pwm_level_max) |
| return -ENODEV; |
| |
| if (panel->backlight.combination_mode) |
| panel->backlight.pwm_level_max *= 0xff; |
| |
| panel->backlight.pwm_level_min = get_backlight_min_vbt(connector); |
| |
| val = i9xx_get_backlight(connector, unused); |
| val = intel_backlight_invert_pwm_level(connector, val); |
| val = clamp(val, panel->backlight.pwm_level_min, panel->backlight.pwm_level_max); |
| |
| panel->backlight.pwm_enabled = val != 0; |
| |
| drm_dbg_kms(&i915->drm, |
| "[CONNECTOR:%d:%s] Using native PWM for backlight control\n", |
| connector->base.base.id, connector->base.name); |
| |
| return 0; |
| } |
| |
| static int i965_setup_backlight(struct intel_connector *connector, enum pipe unused) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| u32 ctl, ctl2; |
| |
| ctl2 = intel_de_read(i915, BLC_PWM_CTL2); |
| panel->backlight.combination_mode = ctl2 & BLM_COMBINATION_MODE; |
| panel->backlight.active_low_pwm = ctl2 & BLM_POLARITY_I965; |
| |
| ctl = intel_de_read(i915, BLC_PWM_CTL); |
| panel->backlight.pwm_level_max = ctl >> 16; |
| |
| if (!panel->backlight.pwm_level_max) |
| panel->backlight.pwm_level_max = get_backlight_max_vbt(connector); |
| |
| if (!panel->backlight.pwm_level_max) |
| return -ENODEV; |
| |
| if (panel->backlight.combination_mode) |
| panel->backlight.pwm_level_max *= 0xff; |
| |
| panel->backlight.pwm_level_min = get_backlight_min_vbt(connector); |
| |
| panel->backlight.pwm_enabled = ctl2 & BLM_PWM_ENABLE; |
| |
| drm_dbg_kms(&i915->drm, |
| "[CONNECTOR:%d:%s] Using native PWM for backlight control\n", |
| connector->base.base.id, connector->base.name); |
| |
| return 0; |
| } |
| |
| static int vlv_setup_backlight(struct intel_connector *connector, enum pipe pipe) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| u32 ctl, ctl2; |
| |
| if (drm_WARN_ON(&i915->drm, pipe != PIPE_A && pipe != PIPE_B)) |
| return -ENODEV; |
| |
| ctl2 = intel_de_read(i915, VLV_BLC_PWM_CTL2(pipe)); |
| panel->backlight.active_low_pwm = ctl2 & BLM_POLARITY_I965; |
| |
| ctl = intel_de_read(i915, VLV_BLC_PWM_CTL(pipe)); |
| panel->backlight.pwm_level_max = ctl >> 16; |
| |
| if (!panel->backlight.pwm_level_max) |
| panel->backlight.pwm_level_max = get_backlight_max_vbt(connector); |
| |
| if (!panel->backlight.pwm_level_max) |
| return -ENODEV; |
| |
| panel->backlight.pwm_level_min = get_backlight_min_vbt(connector); |
| |
| panel->backlight.pwm_enabled = ctl2 & BLM_PWM_ENABLE; |
| |
| drm_dbg_kms(&i915->drm, |
| "[CONNECTOR:%d:%s] Using native PWM for backlight control (on pipe %c)\n", |
| connector->base.base.id, connector->base.name, pipe_name(pipe)); |
| |
| return 0; |
| } |
| |
| static int |
| bxt_setup_backlight(struct intel_connector *connector, enum pipe unused) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| u32 pwm_ctl, val; |
| |
| panel->backlight.controller = connector->panel.vbt.backlight.controller; |
| |
| pwm_ctl = intel_de_read(i915, |
| BXT_BLC_PWM_CTL(panel->backlight.controller)); |
| |
| /* Controller 1 uses the utility pin. */ |
| if (panel->backlight.controller == 1) { |
| val = intel_de_read(i915, UTIL_PIN_CTL); |
| panel->backlight.util_pin_active_low = |
| val & UTIL_PIN_POLARITY; |
| } |
| |
| panel->backlight.active_low_pwm = pwm_ctl & BXT_BLC_PWM_POLARITY; |
| panel->backlight.pwm_level_max = |
| intel_de_read(i915, BXT_BLC_PWM_FREQ(panel->backlight.controller)); |
| |
| if (!panel->backlight.pwm_level_max) |
| panel->backlight.pwm_level_max = get_backlight_max_vbt(connector); |
| |
| if (!panel->backlight.pwm_level_max) |
| return -ENODEV; |
| |
| panel->backlight.pwm_level_min = get_backlight_min_vbt(connector); |
| |
| panel->backlight.pwm_enabled = pwm_ctl & BXT_BLC_PWM_ENABLE; |
| |
| drm_dbg_kms(&i915->drm, |
| "[CONNECTOR:%d:%s] Using native PWM for backlight control (controller=%d)\n", |
| connector->base.base.id, connector->base.name, |
| panel->backlight.controller); |
| |
| return 0; |
| } |
| |
| static int cnp_num_backlight_controllers(struct drm_i915_private *i915) |
| { |
| if (INTEL_PCH_TYPE(i915) >= PCH_MTL) |
| return 2; |
| |
| if (INTEL_PCH_TYPE(i915) >= PCH_DG1) |
| return 1; |
| |
| if (INTEL_PCH_TYPE(i915) >= PCH_ICP) |
| return 2; |
| |
| return 1; |
| } |
| |
| static bool cnp_backlight_controller_is_valid(struct drm_i915_private *i915, int controller) |
| { |
| if (controller < 0 || controller >= cnp_num_backlight_controllers(i915)) |
| return false; |
| |
| if (controller == 1 && |
| INTEL_PCH_TYPE(i915) >= PCH_ICP && |
| INTEL_PCH_TYPE(i915) <= PCH_ADP) |
| return intel_de_read(i915, SOUTH_CHICKEN1) & ICP_SECOND_PPS_IO_SELECT; |
| |
| return true; |
| } |
| |
| static int |
| cnp_setup_backlight(struct intel_connector *connector, enum pipe unused) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| u32 pwm_ctl; |
| |
| /* |
| * CNP has the BXT implementation of backlight, but with only one |
| * controller. ICP+ can have two controllers, depending on pin muxing. |
| */ |
| panel->backlight.controller = connector->panel.vbt.backlight.controller; |
| if (!cnp_backlight_controller_is_valid(i915, panel->backlight.controller)) { |
| drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] Invalid backlight controller %d, assuming 0\n", |
| connector->base.base.id, connector->base.name, |
| panel->backlight.controller); |
| panel->backlight.controller = 0; |
| } |
| |
| pwm_ctl = intel_de_read(i915, |
| BXT_BLC_PWM_CTL(panel->backlight.controller)); |
| |
| panel->backlight.active_low_pwm = pwm_ctl & BXT_BLC_PWM_POLARITY; |
| panel->backlight.pwm_level_max = |
| intel_de_read(i915, BXT_BLC_PWM_FREQ(panel->backlight.controller)); |
| |
| if (!panel->backlight.pwm_level_max) |
| panel->backlight.pwm_level_max = get_backlight_max_vbt(connector); |
| |
| if (!panel->backlight.pwm_level_max) |
| return -ENODEV; |
| |
| panel->backlight.pwm_level_min = get_backlight_min_vbt(connector); |
| |
| panel->backlight.pwm_enabled = pwm_ctl & BXT_BLC_PWM_ENABLE; |
| |
| drm_dbg_kms(&i915->drm, |
| "[CONNECTOR:%d:%s] Using native PCH PWM for backlight control (controller=%d)\n", |
| connector->base.base.id, connector->base.name, |
| panel->backlight.controller); |
| |
| return 0; |
| } |
| |
| static int ext_pwm_setup_backlight(struct intel_connector *connector, |
| enum pipe pipe) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| const char *desc; |
| u32 level; |
| |
| /* Get the right PWM chip for DSI backlight according to VBT */ |
| if (connector->panel.vbt.dsi.config->pwm_blc == PPS_BLC_PMIC) { |
| panel->backlight.pwm = pwm_get(i915->drm.dev, "pwm_pmic_backlight"); |
| desc = "PMIC"; |
| } else { |
| panel->backlight.pwm = pwm_get(i915->drm.dev, "pwm_soc_backlight"); |
| desc = "SoC"; |
| } |
| |
| if (IS_ERR(panel->backlight.pwm)) { |
| drm_err(&i915->drm, "[CONNECTOR:%d:%s] Failed to get the %s PWM chip\n", |
| connector->base.base.id, connector->base.name, desc); |
| panel->backlight.pwm = NULL; |
| return -ENODEV; |
| } |
| |
| panel->backlight.pwm_level_max = 100; /* 100% */ |
| panel->backlight.pwm_level_min = get_backlight_min_vbt(connector); |
| |
| if (pwm_is_enabled(panel->backlight.pwm)) { |
| /* PWM is already enabled, use existing settings */ |
| pwm_get_state(panel->backlight.pwm, &panel->backlight.pwm_state); |
| |
| level = pwm_get_relative_duty_cycle(&panel->backlight.pwm_state, |
| 100); |
| level = intel_backlight_invert_pwm_level(connector, level); |
| panel->backlight.pwm_enabled = true; |
| |
| drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] PWM already enabled at freq %ld, VBT freq %d, level %d\n", |
| connector->base.base.id, connector->base.name, |
| NSEC_PER_SEC / (unsigned long)panel->backlight.pwm_state.period, |
| get_vbt_pwm_freq(connector), level); |
| } else { |
| /* Set period from VBT frequency, leave other settings at 0. */ |
| panel->backlight.pwm_state.period = |
| NSEC_PER_SEC / get_vbt_pwm_freq(connector); |
| } |
| |
| drm_dbg_kms(&i915->drm, |
| "[CONNECTOR:%d:%s] Using %s PWM for backlight control\n", |
| connector->base.base.id, connector->base.name, desc); |
| |
| return 0; |
| } |
| |
| static void intel_pwm_set_backlight(const struct drm_connector_state *conn_state, u32 level) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct intel_panel *panel = &connector->panel; |
| |
| panel->backlight.pwm_funcs->set(conn_state, |
| intel_backlight_invert_pwm_level(connector, level)); |
| } |
| |
| static u32 intel_pwm_get_backlight(struct intel_connector *connector, enum pipe pipe) |
| { |
| struct intel_panel *panel = &connector->panel; |
| |
| return intel_backlight_invert_pwm_level(connector, |
| panel->backlight.pwm_funcs->get(connector, pipe)); |
| } |
| |
| static void intel_pwm_enable_backlight(const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state, u32 level) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct intel_panel *panel = &connector->panel; |
| |
| panel->backlight.pwm_funcs->enable(crtc_state, conn_state, |
| intel_backlight_invert_pwm_level(connector, level)); |
| } |
| |
| static void intel_pwm_disable_backlight(const struct drm_connector_state *conn_state, u32 level) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct intel_panel *panel = &connector->panel; |
| |
| panel->backlight.pwm_funcs->disable(conn_state, |
| intel_backlight_invert_pwm_level(connector, level)); |
| } |
| |
| static int intel_pwm_setup_backlight(struct intel_connector *connector, enum pipe pipe) |
| { |
| struct intel_panel *panel = &connector->panel; |
| int ret; |
| |
| ret = panel->backlight.pwm_funcs->setup(connector, pipe); |
| if (ret < 0) |
| return ret; |
| |
| panel->backlight.min = panel->backlight.pwm_level_min; |
| panel->backlight.max = panel->backlight.pwm_level_max; |
| panel->backlight.level = intel_pwm_get_backlight(connector, pipe); |
| panel->backlight.enabled = panel->backlight.pwm_enabled; |
| |
| return 0; |
| } |
| |
| void intel_backlight_update(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_panel *panel = &connector->panel; |
| |
| if (!panel->backlight.present) |
| return; |
| |
| mutex_lock(&i915->display.backlight.lock); |
| if (!panel->backlight.enabled) |
| __intel_backlight_enable(crtc_state, conn_state); |
| |
| mutex_unlock(&i915->display.backlight.lock); |
| } |
| |
| int intel_backlight_setup(struct intel_connector *connector, enum pipe pipe) |
| { |
| struct intel_display *display = to_intel_display(connector); |
| struct intel_panel *panel = &connector->panel; |
| int ret; |
| |
| if (!connector->panel.vbt.backlight.present) { |
| if (intel_has_quirk(display, QUIRK_BACKLIGHT_PRESENT)) { |
| drm_dbg_kms(display->drm, |
| "[CONNECTOR:%d:%s] no backlight present per VBT, but present per quirk\n", |
| connector->base.base.id, connector->base.name); |
| } else { |
| drm_dbg_kms(display->drm, |
| "[CONNECTOR:%d:%s] no backlight present per VBT\n", |
| connector->base.base.id, connector->base.name); |
| return 0; |
| } |
| } |
| |
| /* ensure intel_panel has been initialized first */ |
| if (drm_WARN_ON(display->drm, !panel->backlight.funcs)) |
| return -ENODEV; |
| |
| /* set level and max in panel struct */ |
| mutex_lock(&display->backlight.lock); |
| ret = panel->backlight.funcs->setup(connector, pipe); |
| mutex_unlock(&display->backlight.lock); |
| |
| if (ret) { |
| drm_dbg_kms(display->drm, |
| "[CONNECTOR:%d:%s] failed to setup backlight\n", |
| connector->base.base.id, connector->base.name); |
| return ret; |
| } |
| |
| panel->backlight.present = true; |
| |
| drm_dbg_kms(display->drm, |
| "[CONNECTOR:%d:%s] backlight initialized, %s, brightness %u/%u\n", |
| connector->base.base.id, connector->base.name, |
| str_enabled_disabled(panel->backlight.enabled), |
| panel->backlight.level, panel->backlight.max); |
| |
| return 0; |
| } |
| |
| void intel_backlight_destroy(struct intel_panel *panel) |
| { |
| /* dispose of the pwm */ |
| if (panel->backlight.pwm) |
| pwm_put(panel->backlight.pwm); |
| |
| panel->backlight.present = false; |
| } |
| |
| static const struct intel_panel_bl_funcs bxt_pwm_funcs = { |
| .setup = bxt_setup_backlight, |
| .enable = bxt_enable_backlight, |
| .disable = bxt_disable_backlight, |
| .set = bxt_set_backlight, |
| .get = bxt_get_backlight, |
| .hz_to_pwm = bxt_hz_to_pwm, |
| }; |
| |
| static const struct intel_panel_bl_funcs cnp_pwm_funcs = { |
| .setup = cnp_setup_backlight, |
| .enable = cnp_enable_backlight, |
| .disable = cnp_disable_backlight, |
| .set = bxt_set_backlight, |
| .get = bxt_get_backlight, |
| .hz_to_pwm = cnp_hz_to_pwm, |
| }; |
| |
| static const struct intel_panel_bl_funcs lpt_pwm_funcs = { |
| .setup = lpt_setup_backlight, |
| .enable = lpt_enable_backlight, |
| .disable = lpt_disable_backlight, |
| .set = lpt_set_backlight, |
| .get = lpt_get_backlight, |
| .hz_to_pwm = lpt_hz_to_pwm, |
| }; |
| |
| static const struct intel_panel_bl_funcs spt_pwm_funcs = { |
| .setup = lpt_setup_backlight, |
| .enable = lpt_enable_backlight, |
| .disable = lpt_disable_backlight, |
| .set = lpt_set_backlight, |
| .get = lpt_get_backlight, |
| .hz_to_pwm = spt_hz_to_pwm, |
| }; |
| |
| static const struct intel_panel_bl_funcs pch_pwm_funcs = { |
| .setup = pch_setup_backlight, |
| .enable = pch_enable_backlight, |
| .disable = pch_disable_backlight, |
| .set = pch_set_backlight, |
| .get = pch_get_backlight, |
| .hz_to_pwm = pch_hz_to_pwm, |
| }; |
| |
| static const struct intel_panel_bl_funcs ext_pwm_funcs = { |
| .setup = ext_pwm_setup_backlight, |
| .enable = ext_pwm_enable_backlight, |
| .disable = ext_pwm_disable_backlight, |
| .set = ext_pwm_set_backlight, |
| .get = ext_pwm_get_backlight, |
| }; |
| |
| static const struct intel_panel_bl_funcs vlv_pwm_funcs = { |
| .setup = vlv_setup_backlight, |
| .enable = vlv_enable_backlight, |
| .disable = vlv_disable_backlight, |
| .set = vlv_set_backlight, |
| .get = vlv_get_backlight, |
| .hz_to_pwm = vlv_hz_to_pwm, |
| }; |
| |
| static const struct intel_panel_bl_funcs i965_pwm_funcs = { |
| .setup = i965_setup_backlight, |
| .enable = i965_enable_backlight, |
| .disable = i965_disable_backlight, |
| .set = i9xx_set_backlight, |
| .get = i9xx_get_backlight, |
| .hz_to_pwm = i965_hz_to_pwm, |
| }; |
| |
| static const struct intel_panel_bl_funcs i9xx_pwm_funcs = { |
| .setup = i9xx_setup_backlight, |
| .enable = i9xx_enable_backlight, |
| .disable = i9xx_disable_backlight, |
| .set = i9xx_set_backlight, |
| .get = i9xx_get_backlight, |
| .hz_to_pwm = i9xx_hz_to_pwm, |
| }; |
| |
| static const struct intel_panel_bl_funcs pwm_bl_funcs = { |
| .setup = intel_pwm_setup_backlight, |
| .enable = intel_pwm_enable_backlight, |
| .disable = intel_pwm_disable_backlight, |
| .set = intel_pwm_set_backlight, |
| .get = intel_pwm_get_backlight, |
| }; |
| |
| /* Set up chip specific backlight functions */ |
| void intel_backlight_init_funcs(struct intel_panel *panel) |
| { |
| struct intel_connector *connector = |
| container_of(panel, struct intel_connector, panel); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| |
| if (connector->base.connector_type == DRM_MODE_CONNECTOR_DSI && |
| intel_dsi_dcs_init_backlight_funcs(connector) == 0) |
| return; |
| |
| if (IS_GEMINILAKE(i915) || IS_BROXTON(i915)) { |
| panel->backlight.pwm_funcs = &bxt_pwm_funcs; |
| } else if (INTEL_PCH_TYPE(i915) >= PCH_CNP) { |
| panel->backlight.pwm_funcs = &cnp_pwm_funcs; |
| } else if (INTEL_PCH_TYPE(i915) >= PCH_LPT) { |
| if (HAS_PCH_LPT(i915)) |
| panel->backlight.pwm_funcs = &lpt_pwm_funcs; |
| else |
| panel->backlight.pwm_funcs = &spt_pwm_funcs; |
| } else if (HAS_PCH_SPLIT(i915)) { |
| panel->backlight.pwm_funcs = &pch_pwm_funcs; |
| } else if (IS_VALLEYVIEW(i915) || IS_CHERRYVIEW(i915)) { |
| if (connector->base.connector_type == DRM_MODE_CONNECTOR_DSI) { |
| panel->backlight.pwm_funcs = &ext_pwm_funcs; |
| } else { |
| panel->backlight.pwm_funcs = &vlv_pwm_funcs; |
| } |
| } else if (DISPLAY_VER(i915) == 4) { |
| panel->backlight.pwm_funcs = &i965_pwm_funcs; |
| } else { |
| panel->backlight.pwm_funcs = &i9xx_pwm_funcs; |
| } |
| |
| if (connector->base.connector_type == DRM_MODE_CONNECTOR_eDP) { |
| if (intel_dp_aux_init_backlight_funcs(connector) == 0) |
| return; |
| |
| if (!intel_has_quirk(&i915->display, QUIRK_NO_PPS_BACKLIGHT_POWER_HOOK)) |
| connector->panel.backlight.power = intel_pps_backlight_power; |
| } |
| |
| /* We're using a standard PWM backlight interface */ |
| panel->backlight.funcs = &pwm_bl_funcs; |
| } |