| #!/bin/bash |
| # SPDX-License-Identifier: GPL-2.0 |
| # In Namespace 0 (at_ns0) using native tunnel |
| # Overlay IP: 10.1.1.100 |
| # local 192.16.1.100 remote 192.16.1.200 |
| # veth0 IP: 172.16.1.100, tunnel dev <type>00 |
| |
| # Out of Namespace using BPF set/get on lwtunnel |
| # Overlay IP: 10.1.1.200 |
| # local 172.16.1.200 remote 172.16.1.100 |
| # veth1 IP: 172.16.1.200, tunnel dev <type>11 |
| |
| function config_device { |
| ip netns add at_ns0 |
| ip link add veth0 type veth peer name veth1 |
| ip link set veth0 netns at_ns0 |
| ip netns exec at_ns0 ip addr add 172.16.1.100/24 dev veth0 |
| ip netns exec at_ns0 ip link set dev veth0 up |
| ip link set dev veth1 up mtu 1500 |
| ip addr add dev veth1 172.16.1.200/24 |
| } |
| |
| function add_gre_tunnel { |
| # in namespace |
| ip netns exec at_ns0 \ |
| ip link add dev $DEV_NS type $TYPE seq key 2 \ |
| local 172.16.1.100 remote 172.16.1.200 |
| ip netns exec at_ns0 ip link set dev $DEV_NS up |
| ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 |
| |
| # out of namespace |
| ip link add dev $DEV type $TYPE key 2 external |
| ip link set dev $DEV up |
| ip addr add dev $DEV 10.1.1.200/24 |
| } |
| |
| function add_ip6gretap_tunnel { |
| |
| # assign ipv6 address |
| ip netns exec at_ns0 ip addr add ::11/96 dev veth0 |
| ip netns exec at_ns0 ip link set dev veth0 up |
| ip addr add dev veth1 ::22/96 |
| ip link set dev veth1 up |
| |
| # in namespace |
| ip netns exec at_ns0 \ |
| ip link add dev $DEV_NS type $TYPE seq flowlabel 0xbcdef key 2 \ |
| local ::11 remote ::22 |
| |
| ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 |
| ip netns exec at_ns0 ip addr add dev $DEV_NS fc80::100/96 |
| ip netns exec at_ns0 ip link set dev $DEV_NS up |
| |
| # out of namespace |
| ip link add dev $DEV type $TYPE external |
| ip addr add dev $DEV 10.1.1.200/24 |
| ip addr add dev $DEV fc80::200/24 |
| ip link set dev $DEV up |
| } |
| |
| function add_erspan_tunnel { |
| # in namespace |
| if [ "$1" == "v1" ]; then |
| ip netns exec at_ns0 \ |
| ip link add dev $DEV_NS type $TYPE seq key 2 \ |
| local 172.16.1.100 remote 172.16.1.200 \ |
| erspan_ver 1 erspan 123 |
| else |
| ip netns exec at_ns0 \ |
| ip link add dev $DEV_NS type $TYPE seq key 2 \ |
| local 172.16.1.100 remote 172.16.1.200 \ |
| erspan_ver 2 erspan_dir egress erspan_hwid 3 |
| fi |
| ip netns exec at_ns0 ip link set dev $DEV_NS up |
| ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 |
| |
| # out of namespace |
| ip link add dev $DEV type $TYPE external |
| ip link set dev $DEV up |
| ip addr add dev $DEV 10.1.1.200/24 |
| } |
| |
| function add_ip6erspan_tunnel { |
| |
| # assign ipv6 address |
| ip netns exec at_ns0 ip addr add ::11/96 dev veth0 |
| ip netns exec at_ns0 ip link set dev veth0 up |
| ip addr add dev veth1 ::22/96 |
| ip link set dev veth1 up |
| |
| # in namespace |
| if [ "$1" == "v1" ]; then |
| ip netns exec at_ns0 \ |
| ip link add dev $DEV_NS type $TYPE seq key 2 \ |
| local ::11 remote ::22 \ |
| erspan_ver 1 erspan 123 |
| else |
| ip netns exec at_ns0 \ |
| ip link add dev $DEV_NS type $TYPE seq key 2 \ |
| local ::11 remote ::22 \ |
| erspan_ver 2 erspan_dir egress erspan_hwid 7 |
| fi |
| ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 |
| ip netns exec at_ns0 ip link set dev $DEV_NS up |
| |
| # out of namespace |
| ip link add dev $DEV type $TYPE external |
| ip addr add dev $DEV 10.1.1.200/24 |
| ip link set dev $DEV up |
| } |
| |
| function add_vxlan_tunnel { |
| # Set static ARP entry here because iptables set-mark works |
| # on L3 packet, as a result not applying to ARP packets, |
| # causing errors at get_tunnel_{key/opt}. |
| |
| # in namespace |
| ip netns exec at_ns0 \ |
| ip link add dev $DEV_NS type $TYPE id 2 dstport 4789 gbp remote 172.16.1.200 |
| ip netns exec at_ns0 ip link set dev $DEV_NS address 52:54:00:d9:01:00 up |
| ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 |
| ip netns exec at_ns0 arp -s 10.1.1.200 52:54:00:d9:02:00 |
| ip netns exec at_ns0 iptables -A OUTPUT -j MARK --set-mark 0x800FF |
| |
| # out of namespace |
| ip link add dev $DEV type $TYPE external gbp dstport 4789 |
| ip link set dev $DEV address 52:54:00:d9:02:00 up |
| ip addr add dev $DEV 10.1.1.200/24 |
| arp -s 10.1.1.100 52:54:00:d9:01:00 |
| } |
| |
| function add_geneve_tunnel { |
| # in namespace |
| ip netns exec at_ns0 \ |
| ip link add dev $DEV_NS type $TYPE id 2 dstport 6081 remote 172.16.1.200 |
| ip netns exec at_ns0 ip link set dev $DEV_NS up |
| ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 |
| |
| # out of namespace |
| ip link add dev $DEV type $TYPE dstport 6081 external |
| ip link set dev $DEV up |
| ip addr add dev $DEV 10.1.1.200/24 |
| } |
| |
| function add_ipip_tunnel { |
| # in namespace |
| ip netns exec at_ns0 \ |
| ip link add dev $DEV_NS type $TYPE local 172.16.1.100 remote 172.16.1.200 |
| ip netns exec at_ns0 ip link set dev $DEV_NS up |
| ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 |
| |
| # out of namespace |
| ip link add dev $DEV type $TYPE external |
| ip link set dev $DEV up |
| ip addr add dev $DEV 10.1.1.200/24 |
| } |
| |
| function attach_bpf { |
| DEV=$1 |
| SET_TUNNEL=$2 |
| GET_TUNNEL=$3 |
| tc qdisc add dev $DEV clsact |
| tc filter add dev $DEV egress bpf da obj tcbpf2_kern.o sec $SET_TUNNEL |
| tc filter add dev $DEV ingress bpf da obj tcbpf2_kern.o sec $GET_TUNNEL |
| } |
| |
| function test_gre { |
| TYPE=gretap |
| DEV_NS=gretap00 |
| DEV=gretap11 |
| config_device |
| add_gre_tunnel |
| attach_bpf $DEV gre_set_tunnel gre_get_tunnel |
| ping -c 1 10.1.1.100 |
| ip netns exec at_ns0 ping -c 1 10.1.1.200 |
| cleanup |
| } |
| |
| function test_ip6gre { |
| TYPE=ip6gre |
| DEV_NS=ip6gre00 |
| DEV=ip6gre11 |
| config_device |
| # reuse the ip6gretap function |
| add_ip6gretap_tunnel |
| attach_bpf $DEV ip6gretap_set_tunnel ip6gretap_get_tunnel |
| # underlay |
| ping6 -c 4 ::11 |
| # overlay: ipv4 over ipv6 |
| ip netns exec at_ns0 ping -c 1 10.1.1.200 |
| ping -c 1 10.1.1.100 |
| # overlay: ipv6 over ipv6 |
| ip netns exec at_ns0 ping6 -c 1 fc80::200 |
| cleanup |
| } |
| |
| function test_ip6gretap { |
| TYPE=ip6gretap |
| DEV_NS=ip6gretap00 |
| DEV=ip6gretap11 |
| config_device |
| add_ip6gretap_tunnel |
| attach_bpf $DEV ip6gretap_set_tunnel ip6gretap_get_tunnel |
| # underlay |
| ping6 -c 4 ::11 |
| # overlay: ipv4 over ipv6 |
| ip netns exec at_ns0 ping -i .2 -c 1 10.1.1.200 |
| ping -c 1 10.1.1.100 |
| # overlay: ipv6 over ipv6 |
| ip netns exec at_ns0 ping6 -c 1 fc80::200 |
| cleanup |
| } |
| |
| function test_erspan { |
| TYPE=erspan |
| DEV_NS=erspan00 |
| DEV=erspan11 |
| config_device |
| add_erspan_tunnel $1 |
| attach_bpf $DEV erspan_set_tunnel erspan_get_tunnel |
| ping -c 1 10.1.1.100 |
| ip netns exec at_ns0 ping -c 1 10.1.1.200 |
| cleanup |
| } |
| |
| function test_ip6erspan { |
| TYPE=ip6erspan |
| DEV_NS=ip6erspan00 |
| DEV=ip6erspan11 |
| config_device |
| add_ip6erspan_tunnel $1 |
| attach_bpf $DEV ip4ip6erspan_set_tunnel ip4ip6erspan_get_tunnel |
| ping6 -c 3 ::11 |
| ip netns exec at_ns0 ping -c 1 10.1.1.200 |
| cleanup |
| } |
| |
| function test_vxlan { |
| TYPE=vxlan |
| DEV_NS=vxlan00 |
| DEV=vxlan11 |
| config_device |
| add_vxlan_tunnel |
| attach_bpf $DEV vxlan_set_tunnel vxlan_get_tunnel |
| ping -c 1 10.1.1.100 |
| ip netns exec at_ns0 ping -c 1 10.1.1.200 |
| cleanup |
| } |
| |
| function test_geneve { |
| TYPE=geneve |
| DEV_NS=geneve00 |
| DEV=geneve11 |
| config_device |
| add_geneve_tunnel |
| attach_bpf $DEV geneve_set_tunnel geneve_get_tunnel |
| ping -c 1 10.1.1.100 |
| ip netns exec at_ns0 ping -c 1 10.1.1.200 |
| cleanup |
| } |
| |
| function test_ipip { |
| TYPE=ipip |
| DEV_NS=ipip00 |
| DEV=ipip11 |
| config_device |
| tcpdump -nei veth1 & |
| cat /sys/kernel/debug/tracing/trace_pipe & |
| add_ipip_tunnel |
| ethtool -K veth1 gso off gro off rx off tx off |
| ip link set dev veth1 mtu 1500 |
| attach_bpf $DEV ipip_set_tunnel ipip_get_tunnel |
| ping -c 1 10.1.1.100 |
| ip netns exec at_ns0 ping -c 1 10.1.1.200 |
| ip netns exec at_ns0 iperf -sD -p 5200 > /dev/null |
| sleep 0.2 |
| iperf -c 10.1.1.100 -n 5k -p 5200 |
| cleanup |
| } |
| |
| function cleanup { |
| set +ex |
| pkill iperf |
| ip netns delete at_ns0 |
| ip link del veth1 |
| ip link del ipip11 |
| ip link del gretap11 |
| ip link del ip6gre11 |
| ip link del ip6gretap11 |
| ip link del vxlan11 |
| ip link del geneve11 |
| ip link del erspan11 |
| ip link del ip6erspan11 |
| pkill tcpdump |
| pkill cat |
| set -ex |
| } |
| |
| trap cleanup 0 2 3 6 9 |
| cleanup |
| echo "Testing GRE tunnel..." |
| test_gre |
| echo "Testing IP6GRE tunnel..." |
| test_ip6gre |
| echo "Testing IP6GRETAP tunnel..." |
| test_ip6gretap |
| echo "Testing ERSPAN tunnel..." |
| test_erspan v1 |
| test_erspan v2 |
| echo "Testing IP6ERSPAN tunnel..." |
| test_ip6erspan v1 |
| test_ip6erspan v2 |
| echo "Testing VXLAN tunnel..." |
| test_vxlan |
| echo "Testing GENEVE tunnel..." |
| test_geneve |
| echo "Testing IPIP tunnel..." |
| test_ipip |
| echo "*** PASS ***" |
