| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Intel Running Average Power Limit (RAPL) Driver |
| * Copyright (c) 2013, Intel Corporation. |
| */ |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/list.h> |
| #include <linux/types.h> |
| #include <linux/device.h> |
| #include <linux/slab.h> |
| #include <linux/log2.h> |
| #include <linux/bitmap.h> |
| #include <linux/delay.h> |
| #include <linux/sysfs.h> |
| #include <linux/cpu.h> |
| #include <linux/powercap.h> |
| #include <linux/suspend.h> |
| #include <asm/iosf_mbi.h> |
| |
| #include <asm/processor.h> |
| #include <asm/cpu_device_id.h> |
| #include <asm/intel-family.h> |
| |
| /* Local defines */ |
| #define MSR_PLATFORM_POWER_LIMIT 0x0000065C |
| |
| /* bitmasks for RAPL MSRs, used by primitive access functions */ |
| #define ENERGY_STATUS_MASK 0xffffffff |
| |
| #define POWER_LIMIT1_MASK 0x7FFF |
| #define POWER_LIMIT1_ENABLE BIT(15) |
| #define POWER_LIMIT1_CLAMP BIT(16) |
| |
| #define POWER_LIMIT2_MASK (0x7FFFULL<<32) |
| #define POWER_LIMIT2_ENABLE BIT_ULL(47) |
| #define POWER_LIMIT2_CLAMP BIT_ULL(48) |
| #define POWER_PACKAGE_LOCK BIT_ULL(63) |
| #define POWER_PP_LOCK BIT(31) |
| |
| #define TIME_WINDOW1_MASK (0x7FULL<<17) |
| #define TIME_WINDOW2_MASK (0x7FULL<<49) |
| |
| #define POWER_UNIT_OFFSET 0 |
| #define POWER_UNIT_MASK 0x0F |
| |
| #define ENERGY_UNIT_OFFSET 0x08 |
| #define ENERGY_UNIT_MASK 0x1F00 |
| |
| #define TIME_UNIT_OFFSET 0x10 |
| #define TIME_UNIT_MASK 0xF0000 |
| |
| #define POWER_INFO_MAX_MASK (0x7fffULL<<32) |
| #define POWER_INFO_MIN_MASK (0x7fffULL<<16) |
| #define POWER_INFO_MAX_TIME_WIN_MASK (0x3fULL<<48) |
| #define POWER_INFO_THERMAL_SPEC_MASK 0x7fff |
| |
| #define PERF_STATUS_THROTTLE_TIME_MASK 0xffffffff |
| #define PP_POLICY_MASK 0x1F |
| |
| /* Non HW constants */ |
| #define RAPL_PRIMITIVE_DERIVED BIT(1) /* not from raw data */ |
| #define RAPL_PRIMITIVE_DUMMY BIT(2) |
| |
| #define TIME_WINDOW_MAX_MSEC 40000 |
| #define TIME_WINDOW_MIN_MSEC 250 |
| #define ENERGY_UNIT_SCALE 1000 /* scale from driver unit to powercap unit */ |
| enum unit_type { |
| ARBITRARY_UNIT, /* no translation */ |
| POWER_UNIT, |
| ENERGY_UNIT, |
| TIME_UNIT, |
| }; |
| |
| enum rapl_domain_type { |
| RAPL_DOMAIN_PACKAGE, /* entire package/socket */ |
| RAPL_DOMAIN_PP0, /* core power plane */ |
| RAPL_DOMAIN_PP1, /* graphics uncore */ |
| RAPL_DOMAIN_DRAM,/* DRAM control_type */ |
| RAPL_DOMAIN_PLATFORM, /* PSys control_type */ |
| RAPL_DOMAIN_MAX, |
| }; |
| |
| enum rapl_domain_msr_id { |
| RAPL_DOMAIN_MSR_LIMIT, |
| RAPL_DOMAIN_MSR_STATUS, |
| RAPL_DOMAIN_MSR_PERF, |
| RAPL_DOMAIN_MSR_POLICY, |
| RAPL_DOMAIN_MSR_INFO, |
| RAPL_DOMAIN_MSR_MAX, |
| }; |
| |
| /* per domain data, some are optional */ |
| enum rapl_primitives { |
| ENERGY_COUNTER, |
| POWER_LIMIT1, |
| POWER_LIMIT2, |
| FW_LOCK, |
| |
| PL1_ENABLE, /* power limit 1, aka long term */ |
| PL1_CLAMP, /* allow frequency to go below OS request */ |
| PL2_ENABLE, /* power limit 2, aka short term, instantaneous */ |
| PL2_CLAMP, |
| |
| TIME_WINDOW1, /* long term */ |
| TIME_WINDOW2, /* short term */ |
| THERMAL_SPEC_POWER, |
| MAX_POWER, |
| |
| MIN_POWER, |
| MAX_TIME_WINDOW, |
| THROTTLED_TIME, |
| PRIORITY_LEVEL, |
| |
| /* below are not raw primitive data */ |
| AVERAGE_POWER, |
| NR_RAPL_PRIMITIVES, |
| }; |
| |
| #define NR_RAW_PRIMITIVES (NR_RAPL_PRIMITIVES - 2) |
| |
| /* Can be expanded to include events, etc.*/ |
| struct rapl_domain_data { |
| u64 primitives[NR_RAPL_PRIMITIVES]; |
| unsigned long timestamp; |
| }; |
| |
| struct msrl_action { |
| u32 msr_no; |
| u64 clear_mask; |
| u64 set_mask; |
| int err; |
| }; |
| |
| #define DOMAIN_STATE_INACTIVE BIT(0) |
| #define DOMAIN_STATE_POWER_LIMIT_SET BIT(1) |
| #define DOMAIN_STATE_BIOS_LOCKED BIT(2) |
| |
| #define NR_POWER_LIMITS (2) |
| struct rapl_power_limit { |
| struct powercap_zone_constraint *constraint; |
| int prim_id; /* primitive ID used to enable */ |
| struct rapl_domain *domain; |
| const char *name; |
| u64 last_power_limit; |
| }; |
| |
| static const char pl1_name[] = "long_term"; |
| static const char pl2_name[] = "short_term"; |
| |
| struct rapl_package; |
| struct rapl_domain { |
| const char *name; |
| enum rapl_domain_type id; |
| int msrs[RAPL_DOMAIN_MSR_MAX]; |
| struct powercap_zone power_zone; |
| struct rapl_domain_data rdd; |
| struct rapl_power_limit rpl[NR_POWER_LIMITS]; |
| u64 attr_map; /* track capabilities */ |
| unsigned int state; |
| unsigned int domain_energy_unit; |
| struct rapl_package *rp; |
| }; |
| #define power_zone_to_rapl_domain(_zone) \ |
| container_of(_zone, struct rapl_domain, power_zone) |
| |
| |
| /* Each physical package contains multiple domains, these are the common |
| * data across RAPL domains within a package. |
| */ |
| struct rapl_package { |
| unsigned int id; /* physical package/socket id */ |
| unsigned int nr_domains; |
| unsigned long domain_map; /* bit map of active domains */ |
| unsigned int power_unit; |
| unsigned int energy_unit; |
| unsigned int time_unit; |
| struct rapl_domain *domains; /* array of domains, sized at runtime */ |
| struct powercap_zone *power_zone; /* keep track of parent zone */ |
| unsigned long power_limit_irq; /* keep track of package power limit |
| * notify interrupt enable status. |
| */ |
| struct list_head plist; |
| int lead_cpu; /* one active cpu per package for access */ |
| /* Track active cpus */ |
| struct cpumask cpumask; |
| }; |
| |
| struct rapl_defaults { |
| u8 floor_freq_reg_addr; |
| int (*check_unit)(struct rapl_package *rp, int cpu); |
| void (*set_floor_freq)(struct rapl_domain *rd, bool mode); |
| u64 (*compute_time_window)(struct rapl_package *rp, u64 val, |
| bool to_raw); |
| unsigned int dram_domain_energy_unit; |
| }; |
| static struct rapl_defaults *rapl_defaults; |
| |
| /* Sideband MBI registers */ |
| #define IOSF_CPU_POWER_BUDGET_CTL_BYT (0x2) |
| #define IOSF_CPU_POWER_BUDGET_CTL_TNG (0xdf) |
| |
| #define PACKAGE_PLN_INT_SAVED BIT(0) |
| #define MAX_PRIM_NAME (32) |
| |
| /* per domain data. used to describe individual knobs such that access function |
| * can be consolidated into one instead of many inline functions. |
| */ |
| struct rapl_primitive_info { |
| const char *name; |
| u64 mask; |
| int shift; |
| enum rapl_domain_msr_id id; |
| enum unit_type unit; |
| u32 flag; |
| }; |
| |
| #define PRIMITIVE_INFO_INIT(p, m, s, i, u, f) { \ |
| .name = #p, \ |
| .mask = m, \ |
| .shift = s, \ |
| .id = i, \ |
| .unit = u, \ |
| .flag = f \ |
| } |
| |
| static void rapl_init_domains(struct rapl_package *rp); |
| static int rapl_read_data_raw(struct rapl_domain *rd, |
| enum rapl_primitives prim, |
| bool xlate, u64 *data); |
| static int rapl_write_data_raw(struct rapl_domain *rd, |
| enum rapl_primitives prim, |
| unsigned long long value); |
| static u64 rapl_unit_xlate(struct rapl_domain *rd, |
| enum unit_type type, u64 value, |
| int to_raw); |
| static void package_power_limit_irq_save(struct rapl_package *rp); |
| |
| static LIST_HEAD(rapl_packages); /* guarded by CPU hotplug lock */ |
| |
| static const char * const rapl_domain_names[] = { |
| "package", |
| "core", |
| "uncore", |
| "dram", |
| "psys", |
| }; |
| |
| static struct powercap_control_type *control_type; /* PowerCap Controller */ |
| static struct rapl_domain *platform_rapl_domain; /* Platform (PSys) domain */ |
| |
| /* caller to ensure CPU hotplug lock is held */ |
| static struct rapl_package *find_package_by_id(int id) |
| { |
| struct rapl_package *rp; |
| |
| list_for_each_entry(rp, &rapl_packages, plist) { |
| if (rp->id == id) |
| return rp; |
| } |
| |
| return NULL; |
| } |
| |
| static int get_energy_counter(struct powercap_zone *power_zone, u64 *energy_raw) |
| { |
| struct rapl_domain *rd; |
| u64 energy_now; |
| |
| /* prevent CPU hotplug, make sure the RAPL domain does not go |
| * away while reading the counter. |
| */ |
| get_online_cpus(); |
| rd = power_zone_to_rapl_domain(power_zone); |
| |
| if (!rapl_read_data_raw(rd, ENERGY_COUNTER, true, &energy_now)) { |
| *energy_raw = energy_now; |
| put_online_cpus(); |
| |
| return 0; |
| } |
| put_online_cpus(); |
| |
| return -EIO; |
| } |
| |
| static int get_max_energy_counter(struct powercap_zone *pcd_dev, u64 *energy) |
| { |
| struct rapl_domain *rd = power_zone_to_rapl_domain(pcd_dev); |
| |
| *energy = rapl_unit_xlate(rd, ENERGY_UNIT, ENERGY_STATUS_MASK, 0); |
| return 0; |
| } |
| |
| static int release_zone(struct powercap_zone *power_zone) |
| { |
| struct rapl_domain *rd = power_zone_to_rapl_domain(power_zone); |
| struct rapl_package *rp = rd->rp; |
| |
| /* package zone is the last zone of a package, we can free |
| * memory here since all children has been unregistered. |
| */ |
| if (rd->id == RAPL_DOMAIN_PACKAGE) { |
| kfree(rd); |
| rp->domains = NULL; |
| } |
| |
| return 0; |
| |
| } |
| |
| static int find_nr_power_limit(struct rapl_domain *rd) |
| { |
| int i, nr_pl = 0; |
| |
| for (i = 0; i < NR_POWER_LIMITS; i++) { |
| if (rd->rpl[i].name) |
| nr_pl++; |
| } |
| |
| return nr_pl; |
| } |
| |
| static int set_domain_enable(struct powercap_zone *power_zone, bool mode) |
| { |
| struct rapl_domain *rd = power_zone_to_rapl_domain(power_zone); |
| |
| if (rd->state & DOMAIN_STATE_BIOS_LOCKED) |
| return -EACCES; |
| |
| get_online_cpus(); |
| rapl_write_data_raw(rd, PL1_ENABLE, mode); |
| if (rapl_defaults->set_floor_freq) |
| rapl_defaults->set_floor_freq(rd, mode); |
| put_online_cpus(); |
| |
| return 0; |
| } |
| |
| static int get_domain_enable(struct powercap_zone *power_zone, bool *mode) |
| { |
| struct rapl_domain *rd = power_zone_to_rapl_domain(power_zone); |
| u64 val; |
| |
| if (rd->state & DOMAIN_STATE_BIOS_LOCKED) { |
| *mode = false; |
| return 0; |
| } |
| get_online_cpus(); |
| if (rapl_read_data_raw(rd, PL1_ENABLE, true, &val)) { |
| put_online_cpus(); |
| return -EIO; |
| } |
| *mode = val; |
| put_online_cpus(); |
| |
| return 0; |
| } |
| |
| /* per RAPL domain ops, in the order of rapl_domain_type */ |
| static const struct powercap_zone_ops zone_ops[] = { |
| /* RAPL_DOMAIN_PACKAGE */ |
| { |
| .get_energy_uj = get_energy_counter, |
| .get_max_energy_range_uj = get_max_energy_counter, |
| .release = release_zone, |
| .set_enable = set_domain_enable, |
| .get_enable = get_domain_enable, |
| }, |
| /* RAPL_DOMAIN_PP0 */ |
| { |
| .get_energy_uj = get_energy_counter, |
| .get_max_energy_range_uj = get_max_energy_counter, |
| .release = release_zone, |
| .set_enable = set_domain_enable, |
| .get_enable = get_domain_enable, |
| }, |
| /* RAPL_DOMAIN_PP1 */ |
| { |
| .get_energy_uj = get_energy_counter, |
| .get_max_energy_range_uj = get_max_energy_counter, |
| .release = release_zone, |
| .set_enable = set_domain_enable, |
| .get_enable = get_domain_enable, |
| }, |
| /* RAPL_DOMAIN_DRAM */ |
| { |
| .get_energy_uj = get_energy_counter, |
| .get_max_energy_range_uj = get_max_energy_counter, |
| .release = release_zone, |
| .set_enable = set_domain_enable, |
| .get_enable = get_domain_enable, |
| }, |
| /* RAPL_DOMAIN_PLATFORM */ |
| { |
| .get_energy_uj = get_energy_counter, |
| .get_max_energy_range_uj = get_max_energy_counter, |
| .release = release_zone, |
| .set_enable = set_domain_enable, |
| .get_enable = get_domain_enable, |
| }, |
| }; |
| |
| |
| /* |
| * Constraint index used by powercap can be different than power limit (PL) |
| * index in that some PLs maybe missing due to non-existant MSRs. So we |
| * need to convert here by finding the valid PLs only (name populated). |
| */ |
| static int contraint_to_pl(struct rapl_domain *rd, int cid) |
| { |
| int i, j; |
| |
| for (i = 0, j = 0; i < NR_POWER_LIMITS; i++) { |
| if ((rd->rpl[i].name) && j++ == cid) { |
| pr_debug("%s: index %d\n", __func__, i); |
| return i; |
| } |
| } |
| pr_err("Cannot find matching power limit for constraint %d\n", cid); |
| |
| return -EINVAL; |
| } |
| |
| static int set_power_limit(struct powercap_zone *power_zone, int cid, |
| u64 power_limit) |
| { |
| struct rapl_domain *rd; |
| struct rapl_package *rp; |
| int ret = 0; |
| int id; |
| |
| get_online_cpus(); |
| rd = power_zone_to_rapl_domain(power_zone); |
| id = contraint_to_pl(rd, cid); |
| if (id < 0) { |
| ret = id; |
| goto set_exit; |
| } |
| |
| rp = rd->rp; |
| |
| if (rd->state & DOMAIN_STATE_BIOS_LOCKED) { |
| dev_warn(&power_zone->dev, "%s locked by BIOS, monitoring only\n", |
| rd->name); |
| ret = -EACCES; |
| goto set_exit; |
| } |
| |
| switch (rd->rpl[id].prim_id) { |
| case PL1_ENABLE: |
| rapl_write_data_raw(rd, POWER_LIMIT1, power_limit); |
| break; |
| case PL2_ENABLE: |
| rapl_write_data_raw(rd, POWER_LIMIT2, power_limit); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| if (!ret) |
| package_power_limit_irq_save(rp); |
| set_exit: |
| put_online_cpus(); |
| return ret; |
| } |
| |
| static int get_current_power_limit(struct powercap_zone *power_zone, int cid, |
| u64 *data) |
| { |
| struct rapl_domain *rd; |
| u64 val; |
| int prim; |
| int ret = 0; |
| int id; |
| |
| get_online_cpus(); |
| rd = power_zone_to_rapl_domain(power_zone); |
| id = contraint_to_pl(rd, cid); |
| if (id < 0) { |
| ret = id; |
| goto get_exit; |
| } |
| |
| switch (rd->rpl[id].prim_id) { |
| case PL1_ENABLE: |
| prim = POWER_LIMIT1; |
| break; |
| case PL2_ENABLE: |
| prim = POWER_LIMIT2; |
| break; |
| default: |
| put_online_cpus(); |
| return -EINVAL; |
| } |
| if (rapl_read_data_raw(rd, prim, true, &val)) |
| ret = -EIO; |
| else |
| *data = val; |
| |
| get_exit: |
| put_online_cpus(); |
| |
| return ret; |
| } |
| |
| static int set_time_window(struct powercap_zone *power_zone, int cid, |
| u64 window) |
| { |
| struct rapl_domain *rd; |
| int ret = 0; |
| int id; |
| |
| get_online_cpus(); |
| rd = power_zone_to_rapl_domain(power_zone); |
| id = contraint_to_pl(rd, cid); |
| if (id < 0) { |
| ret = id; |
| goto set_time_exit; |
| } |
| |
| switch (rd->rpl[id].prim_id) { |
| case PL1_ENABLE: |
| rapl_write_data_raw(rd, TIME_WINDOW1, window); |
| break; |
| case PL2_ENABLE: |
| rapl_write_data_raw(rd, TIME_WINDOW2, window); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| set_time_exit: |
| put_online_cpus(); |
| return ret; |
| } |
| |
| static int get_time_window(struct powercap_zone *power_zone, int cid, u64 *data) |
| { |
| struct rapl_domain *rd; |
| u64 val; |
| int ret = 0; |
| int id; |
| |
| get_online_cpus(); |
| rd = power_zone_to_rapl_domain(power_zone); |
| id = contraint_to_pl(rd, cid); |
| if (id < 0) { |
| ret = id; |
| goto get_time_exit; |
| } |
| |
| switch (rd->rpl[id].prim_id) { |
| case PL1_ENABLE: |
| ret = rapl_read_data_raw(rd, TIME_WINDOW1, true, &val); |
| break; |
| case PL2_ENABLE: |
| ret = rapl_read_data_raw(rd, TIME_WINDOW2, true, &val); |
| break; |
| default: |
| put_online_cpus(); |
| return -EINVAL; |
| } |
| if (!ret) |
| *data = val; |
| |
| get_time_exit: |
| put_online_cpus(); |
| |
| return ret; |
| } |
| |
| static const char *get_constraint_name(struct powercap_zone *power_zone, int cid) |
| { |
| struct rapl_domain *rd; |
| int id; |
| |
| rd = power_zone_to_rapl_domain(power_zone); |
| id = contraint_to_pl(rd, cid); |
| if (id >= 0) |
| return rd->rpl[id].name; |
| |
| return NULL; |
| } |
| |
| |
| static int get_max_power(struct powercap_zone *power_zone, int id, |
| u64 *data) |
| { |
| struct rapl_domain *rd; |
| u64 val; |
| int prim; |
| int ret = 0; |
| |
| get_online_cpus(); |
| rd = power_zone_to_rapl_domain(power_zone); |
| switch (rd->rpl[id].prim_id) { |
| case PL1_ENABLE: |
| prim = THERMAL_SPEC_POWER; |
| break; |
| case PL2_ENABLE: |
| prim = MAX_POWER; |
| break; |
| default: |
| put_online_cpus(); |
| return -EINVAL; |
| } |
| if (rapl_read_data_raw(rd, prim, true, &val)) |
| ret = -EIO; |
| else |
| *data = val; |
| |
| put_online_cpus(); |
| |
| return ret; |
| } |
| |
| static const struct powercap_zone_constraint_ops constraint_ops = { |
| .set_power_limit_uw = set_power_limit, |
| .get_power_limit_uw = get_current_power_limit, |
| .set_time_window_us = set_time_window, |
| .get_time_window_us = get_time_window, |
| .get_max_power_uw = get_max_power, |
| .get_name = get_constraint_name, |
| }; |
| |
| /* called after domain detection and package level data are set */ |
| static void rapl_init_domains(struct rapl_package *rp) |
| { |
| int i; |
| struct rapl_domain *rd = rp->domains; |
| |
| for (i = 0; i < RAPL_DOMAIN_MAX; i++) { |
| unsigned int mask = rp->domain_map & (1 << i); |
| switch (mask) { |
| case BIT(RAPL_DOMAIN_PACKAGE): |
| rd->name = rapl_domain_names[RAPL_DOMAIN_PACKAGE]; |
| rd->id = RAPL_DOMAIN_PACKAGE; |
| rd->msrs[0] = MSR_PKG_POWER_LIMIT; |
| rd->msrs[1] = MSR_PKG_ENERGY_STATUS; |
| rd->msrs[2] = MSR_PKG_PERF_STATUS; |
| rd->msrs[3] = 0; |
| rd->msrs[4] = MSR_PKG_POWER_INFO; |
| rd->rpl[0].prim_id = PL1_ENABLE; |
| rd->rpl[0].name = pl1_name; |
| rd->rpl[1].prim_id = PL2_ENABLE; |
| rd->rpl[1].name = pl2_name; |
| break; |
| case BIT(RAPL_DOMAIN_PP0): |
| rd->name = rapl_domain_names[RAPL_DOMAIN_PP0]; |
| rd->id = RAPL_DOMAIN_PP0; |
| rd->msrs[0] = MSR_PP0_POWER_LIMIT; |
| rd->msrs[1] = MSR_PP0_ENERGY_STATUS; |
| rd->msrs[2] = 0; |
| rd->msrs[3] = MSR_PP0_POLICY; |
| rd->msrs[4] = 0; |
| rd->rpl[0].prim_id = PL1_ENABLE; |
| rd->rpl[0].name = pl1_name; |
| break; |
| case BIT(RAPL_DOMAIN_PP1): |
| rd->name = rapl_domain_names[RAPL_DOMAIN_PP1]; |
| rd->id = RAPL_DOMAIN_PP1; |
| rd->msrs[0] = MSR_PP1_POWER_LIMIT; |
| rd->msrs[1] = MSR_PP1_ENERGY_STATUS; |
| rd->msrs[2] = 0; |
| rd->msrs[3] = MSR_PP1_POLICY; |
| rd->msrs[4] = 0; |
| rd->rpl[0].prim_id = PL1_ENABLE; |
| rd->rpl[0].name = pl1_name; |
| break; |
| case BIT(RAPL_DOMAIN_DRAM): |
| rd->name = rapl_domain_names[RAPL_DOMAIN_DRAM]; |
| rd->id = RAPL_DOMAIN_DRAM; |
| rd->msrs[0] = MSR_DRAM_POWER_LIMIT; |
| rd->msrs[1] = MSR_DRAM_ENERGY_STATUS; |
| rd->msrs[2] = MSR_DRAM_PERF_STATUS; |
| rd->msrs[3] = 0; |
| rd->msrs[4] = MSR_DRAM_POWER_INFO; |
| rd->rpl[0].prim_id = PL1_ENABLE; |
| rd->rpl[0].name = pl1_name; |
| rd->domain_energy_unit = |
| rapl_defaults->dram_domain_energy_unit; |
| if (rd->domain_energy_unit) |
| pr_info("DRAM domain energy unit %dpj\n", |
| rd->domain_energy_unit); |
| break; |
| } |
| if (mask) { |
| rd->rp = rp; |
| rd++; |
| } |
| } |
| } |
| |
| static u64 rapl_unit_xlate(struct rapl_domain *rd, enum unit_type type, |
| u64 value, int to_raw) |
| { |
| u64 units = 1; |
| struct rapl_package *rp = rd->rp; |
| u64 scale = 1; |
| |
| switch (type) { |
| case POWER_UNIT: |
| units = rp->power_unit; |
| break; |
| case ENERGY_UNIT: |
| scale = ENERGY_UNIT_SCALE; |
| /* per domain unit takes precedence */ |
| if (rd->domain_energy_unit) |
| units = rd->domain_energy_unit; |
| else |
| units = rp->energy_unit; |
| break; |
| case TIME_UNIT: |
| return rapl_defaults->compute_time_window(rp, value, to_raw); |
| case ARBITRARY_UNIT: |
| default: |
| return value; |
| }; |
| |
| if (to_raw) |
| return div64_u64(value, units) * scale; |
| |
| value *= units; |
| |
| return div64_u64(value, scale); |
| } |
| |
| /* in the order of enum rapl_primitives */ |
| static struct rapl_primitive_info rpi[] = { |
| /* name, mask, shift, msr index, unit divisor */ |
| PRIMITIVE_INFO_INIT(ENERGY_COUNTER, ENERGY_STATUS_MASK, 0, |
| RAPL_DOMAIN_MSR_STATUS, ENERGY_UNIT, 0), |
| PRIMITIVE_INFO_INIT(POWER_LIMIT1, POWER_LIMIT1_MASK, 0, |
| RAPL_DOMAIN_MSR_LIMIT, POWER_UNIT, 0), |
| PRIMITIVE_INFO_INIT(POWER_LIMIT2, POWER_LIMIT2_MASK, 32, |
| RAPL_DOMAIN_MSR_LIMIT, POWER_UNIT, 0), |
| PRIMITIVE_INFO_INIT(FW_LOCK, POWER_PP_LOCK, 31, |
| RAPL_DOMAIN_MSR_LIMIT, ARBITRARY_UNIT, 0), |
| PRIMITIVE_INFO_INIT(PL1_ENABLE, POWER_LIMIT1_ENABLE, 15, |
| RAPL_DOMAIN_MSR_LIMIT, ARBITRARY_UNIT, 0), |
| PRIMITIVE_INFO_INIT(PL1_CLAMP, POWER_LIMIT1_CLAMP, 16, |
| RAPL_DOMAIN_MSR_LIMIT, ARBITRARY_UNIT, 0), |
| PRIMITIVE_INFO_INIT(PL2_ENABLE, POWER_LIMIT2_ENABLE, 47, |
| RAPL_DOMAIN_MSR_LIMIT, ARBITRARY_UNIT, 0), |
| PRIMITIVE_INFO_INIT(PL2_CLAMP, POWER_LIMIT2_CLAMP, 48, |
| RAPL_DOMAIN_MSR_LIMIT, ARBITRARY_UNIT, 0), |
| PRIMITIVE_INFO_INIT(TIME_WINDOW1, TIME_WINDOW1_MASK, 17, |
| RAPL_DOMAIN_MSR_LIMIT, TIME_UNIT, 0), |
| PRIMITIVE_INFO_INIT(TIME_WINDOW2, TIME_WINDOW2_MASK, 49, |
| RAPL_DOMAIN_MSR_LIMIT, TIME_UNIT, 0), |
| PRIMITIVE_INFO_INIT(THERMAL_SPEC_POWER, POWER_INFO_THERMAL_SPEC_MASK, |
| 0, RAPL_DOMAIN_MSR_INFO, POWER_UNIT, 0), |
| PRIMITIVE_INFO_INIT(MAX_POWER, POWER_INFO_MAX_MASK, 32, |
| RAPL_DOMAIN_MSR_INFO, POWER_UNIT, 0), |
| PRIMITIVE_INFO_INIT(MIN_POWER, POWER_INFO_MIN_MASK, 16, |
| RAPL_DOMAIN_MSR_INFO, POWER_UNIT, 0), |
| PRIMITIVE_INFO_INIT(MAX_TIME_WINDOW, POWER_INFO_MAX_TIME_WIN_MASK, 48, |
| RAPL_DOMAIN_MSR_INFO, TIME_UNIT, 0), |
| PRIMITIVE_INFO_INIT(THROTTLED_TIME, PERF_STATUS_THROTTLE_TIME_MASK, 0, |
| RAPL_DOMAIN_MSR_PERF, TIME_UNIT, 0), |
| PRIMITIVE_INFO_INIT(PRIORITY_LEVEL, PP_POLICY_MASK, 0, |
| RAPL_DOMAIN_MSR_POLICY, ARBITRARY_UNIT, 0), |
| /* non-hardware */ |
| PRIMITIVE_INFO_INIT(AVERAGE_POWER, 0, 0, 0, POWER_UNIT, |
| RAPL_PRIMITIVE_DERIVED), |
| {NULL, 0, 0, 0}, |
| }; |
| |
| /* Read primitive data based on its related struct rapl_primitive_info. |
| * if xlate flag is set, return translated data based on data units, i.e. |
| * time, energy, and power. |
| * RAPL MSRs are non-architectual and are laid out not consistently across |
| * domains. Here we use primitive info to allow writing consolidated access |
| * functions. |
| * For a given primitive, it is processed by MSR mask and shift. Unit conversion |
| * is pre-assigned based on RAPL unit MSRs read at init time. |
| * 63-------------------------- 31--------------------------- 0 |
| * | xxxxx (mask) | |
| * | |<- shift ----------------| |
| * 63-------------------------- 31--------------------------- 0 |
| */ |
| static int rapl_read_data_raw(struct rapl_domain *rd, |
| enum rapl_primitives prim, |
| bool xlate, u64 *data) |
| { |
| u64 value, final; |
| u32 msr; |
| struct rapl_primitive_info *rp = &rpi[prim]; |
| int cpu; |
| |
| if (!rp->name || rp->flag & RAPL_PRIMITIVE_DUMMY) |
| return -EINVAL; |
| |
| msr = rd->msrs[rp->id]; |
| if (!msr) |
| return -EINVAL; |
| |
| cpu = rd->rp->lead_cpu; |
| |
| /* special-case package domain, which uses a different bit*/ |
| if (prim == FW_LOCK && rd->id == RAPL_DOMAIN_PACKAGE) { |
| rp->mask = POWER_PACKAGE_LOCK; |
| rp->shift = 63; |
| } |
| /* non-hardware data are collected by the polling thread */ |
| if (rp->flag & RAPL_PRIMITIVE_DERIVED) { |
| *data = rd->rdd.primitives[prim]; |
| return 0; |
| } |
| |
| if (rdmsrl_safe_on_cpu(cpu, msr, &value)) { |
| pr_debug("failed to read msr 0x%x on cpu %d\n", msr, cpu); |
| return -EIO; |
| } |
| |
| final = value & rp->mask; |
| final = final >> rp->shift; |
| if (xlate) |
| *data = rapl_unit_xlate(rd, rp->unit, final, 0); |
| else |
| *data = final; |
| |
| return 0; |
| } |
| |
| |
| static int msrl_update_safe(u32 msr_no, u64 clear_mask, u64 set_mask) |
| { |
| int err; |
| u64 val; |
| |
| err = rdmsrl_safe(msr_no, &val); |
| if (err) |
| goto out; |
| |
| val &= ~clear_mask; |
| val |= set_mask; |
| |
| err = wrmsrl_safe(msr_no, val); |
| |
| out: |
| return err; |
| } |
| |
| static void msrl_update_func(void *info) |
| { |
| struct msrl_action *ma = info; |
| |
| ma->err = msrl_update_safe(ma->msr_no, ma->clear_mask, ma->set_mask); |
| } |
| |
| /* Similar use of primitive info in the read counterpart */ |
| static int rapl_write_data_raw(struct rapl_domain *rd, |
| enum rapl_primitives prim, |
| unsigned long long value) |
| { |
| struct rapl_primitive_info *rp = &rpi[prim]; |
| int cpu; |
| u64 bits; |
| struct msrl_action ma; |
| int ret; |
| |
| cpu = rd->rp->lead_cpu; |
| bits = rapl_unit_xlate(rd, rp->unit, value, 1); |
| bits <<= rp->shift; |
| bits &= rp->mask; |
| |
| memset(&ma, 0, sizeof(ma)); |
| |
| ma.msr_no = rd->msrs[rp->id]; |
| ma.clear_mask = rp->mask; |
| ma.set_mask = bits; |
| |
| ret = smp_call_function_single(cpu, msrl_update_func, &ma, 1); |
| if (ret) |
| WARN_ON_ONCE(ret); |
| else |
| ret = ma.err; |
| |
| return ret; |
| } |
| |
| /* |
| * Raw RAPL data stored in MSRs are in certain scales. We need to |
| * convert them into standard units based on the units reported in |
| * the RAPL unit MSRs. This is specific to CPUs as the method to |
| * calculate units differ on different CPUs. |
| * We convert the units to below format based on CPUs. |
| * i.e. |
| * energy unit: picoJoules : Represented in picoJoules by default |
| * power unit : microWatts : Represented in milliWatts by default |
| * time unit : microseconds: Represented in seconds by default |
| */ |
| static int rapl_check_unit_core(struct rapl_package *rp, int cpu) |
| { |
| u64 msr_val; |
| u32 value; |
| |
| if (rdmsrl_safe_on_cpu(cpu, MSR_RAPL_POWER_UNIT, &msr_val)) { |
| pr_err("Failed to read power unit MSR 0x%x on CPU %d, exit.\n", |
| MSR_RAPL_POWER_UNIT, cpu); |
| return -ENODEV; |
| } |
| |
| value = (msr_val & ENERGY_UNIT_MASK) >> ENERGY_UNIT_OFFSET; |
| rp->energy_unit = ENERGY_UNIT_SCALE * 1000000 / (1 << value); |
| |
| value = (msr_val & POWER_UNIT_MASK) >> POWER_UNIT_OFFSET; |
| rp->power_unit = 1000000 / (1 << value); |
| |
| value = (msr_val & TIME_UNIT_MASK) >> TIME_UNIT_OFFSET; |
| rp->time_unit = 1000000 / (1 << value); |
| |
| pr_debug("Core CPU package %d energy=%dpJ, time=%dus, power=%duW\n", |
| rp->id, rp->energy_unit, rp->time_unit, rp->power_unit); |
| |
| return 0; |
| } |
| |
| static int rapl_check_unit_atom(struct rapl_package *rp, int cpu) |
| { |
| u64 msr_val; |
| u32 value; |
| |
| if (rdmsrl_safe_on_cpu(cpu, MSR_RAPL_POWER_UNIT, &msr_val)) { |
| pr_err("Failed to read power unit MSR 0x%x on CPU %d, exit.\n", |
| MSR_RAPL_POWER_UNIT, cpu); |
| return -ENODEV; |
| } |
| value = (msr_val & ENERGY_UNIT_MASK) >> ENERGY_UNIT_OFFSET; |
| rp->energy_unit = ENERGY_UNIT_SCALE * 1 << value; |
| |
| value = (msr_val & POWER_UNIT_MASK) >> POWER_UNIT_OFFSET; |
| rp->power_unit = (1 << value) * 1000; |
| |
| value = (msr_val & TIME_UNIT_MASK) >> TIME_UNIT_OFFSET; |
| rp->time_unit = 1000000 / (1 << value); |
| |
| pr_debug("Atom package %d energy=%dpJ, time=%dus, power=%duW\n", |
| rp->id, rp->energy_unit, rp->time_unit, rp->power_unit); |
| |
| return 0; |
| } |
| |
| static void power_limit_irq_save_cpu(void *info) |
| { |
| u32 l, h = 0; |
| struct rapl_package *rp = (struct rapl_package *)info; |
| |
| /* save the state of PLN irq mask bit before disabling it */ |
| rdmsr_safe(MSR_IA32_PACKAGE_THERM_INTERRUPT, &l, &h); |
| if (!(rp->power_limit_irq & PACKAGE_PLN_INT_SAVED)) { |
| rp->power_limit_irq = l & PACKAGE_THERM_INT_PLN_ENABLE; |
| rp->power_limit_irq |= PACKAGE_PLN_INT_SAVED; |
| } |
| l &= ~PACKAGE_THERM_INT_PLN_ENABLE; |
| wrmsr_safe(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h); |
| } |
| |
| |
| /* REVISIT: |
| * When package power limit is set artificially low by RAPL, LVT |
| * thermal interrupt for package power limit should be ignored |
| * since we are not really exceeding the real limit. The intention |
| * is to avoid excessive interrupts while we are trying to save power. |
| * A useful feature might be routing the package_power_limit interrupt |
| * to userspace via eventfd. once we have a usecase, this is simple |
| * to do by adding an atomic notifier. |
| */ |
| |
| static void package_power_limit_irq_save(struct rapl_package *rp) |
| { |
| if (!boot_cpu_has(X86_FEATURE_PTS) || !boot_cpu_has(X86_FEATURE_PLN)) |
| return; |
| |
| smp_call_function_single(rp->lead_cpu, power_limit_irq_save_cpu, rp, 1); |
| } |
| |
| /* |
| * Restore per package power limit interrupt enable state. Called from cpu |
| * hotplug code on package removal. |
| */ |
| static void package_power_limit_irq_restore(struct rapl_package *rp) |
| { |
| u32 l, h; |
| |
| if (!boot_cpu_has(X86_FEATURE_PTS) || !boot_cpu_has(X86_FEATURE_PLN)) |
| return; |
| |
| /* irq enable state not saved, nothing to restore */ |
| if (!(rp->power_limit_irq & PACKAGE_PLN_INT_SAVED)) |
| return; |
| |
| rdmsr_safe(MSR_IA32_PACKAGE_THERM_INTERRUPT, &l, &h); |
| |
| if (rp->power_limit_irq & PACKAGE_THERM_INT_PLN_ENABLE) |
| l |= PACKAGE_THERM_INT_PLN_ENABLE; |
| else |
| l &= ~PACKAGE_THERM_INT_PLN_ENABLE; |
| |
| wrmsr_safe(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h); |
| } |
| |
| static void set_floor_freq_default(struct rapl_domain *rd, bool mode) |
| { |
| int nr_powerlimit = find_nr_power_limit(rd); |
| |
| /* always enable clamp such that p-state can go below OS requested |
| * range. power capping priority over guranteed frequency. |
| */ |
| rapl_write_data_raw(rd, PL1_CLAMP, mode); |
| |
| /* some domains have pl2 */ |
| if (nr_powerlimit > 1) { |
| rapl_write_data_raw(rd, PL2_ENABLE, mode); |
| rapl_write_data_raw(rd, PL2_CLAMP, mode); |
| } |
| } |
| |
| static void set_floor_freq_atom(struct rapl_domain *rd, bool enable) |
| { |
| static u32 power_ctrl_orig_val; |
| u32 mdata; |
| |
| if (!rapl_defaults->floor_freq_reg_addr) { |
| pr_err("Invalid floor frequency config register\n"); |
| return; |
| } |
| |
| if (!power_ctrl_orig_val) |
| iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_CR_READ, |
| rapl_defaults->floor_freq_reg_addr, |
| &power_ctrl_orig_val); |
| mdata = power_ctrl_orig_val; |
| if (enable) { |
| mdata &= ~(0x7f << 8); |
| mdata |= 1 << 8; |
| } |
| iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_CR_WRITE, |
| rapl_defaults->floor_freq_reg_addr, mdata); |
| } |
| |
| static u64 rapl_compute_time_window_core(struct rapl_package *rp, u64 value, |
| bool to_raw) |
| { |
| u64 f, y; /* fraction and exp. used for time unit */ |
| |
| /* |
| * Special processing based on 2^Y*(1+F/4), refer |
| * to Intel Software Developer's manual Vol.3B: CH 14.9.3. |
| */ |
| if (!to_raw) { |
| f = (value & 0x60) >> 5; |
| y = value & 0x1f; |
| value = (1 << y) * (4 + f) * rp->time_unit / 4; |
| } else { |
| do_div(value, rp->time_unit); |
| y = ilog2(value); |
| f = div64_u64(4 * (value - (1 << y)), 1 << y); |
| value = (y & 0x1f) | ((f & 0x3) << 5); |
| } |
| return value; |
| } |
| |
| static u64 rapl_compute_time_window_atom(struct rapl_package *rp, u64 value, |
| bool to_raw) |
| { |
| /* |
| * Atom time unit encoding is straight forward val * time_unit, |
| * where time_unit is default to 1 sec. Never 0. |
| */ |
| if (!to_raw) |
| return (value) ? value *= rp->time_unit : rp->time_unit; |
| else |
| value = div64_u64(value, rp->time_unit); |
| |
| return value; |
| } |
| |
| static const struct rapl_defaults rapl_defaults_core = { |
| .floor_freq_reg_addr = 0, |
| .check_unit = rapl_check_unit_core, |
| .set_floor_freq = set_floor_freq_default, |
| .compute_time_window = rapl_compute_time_window_core, |
| }; |
| |
| static const struct rapl_defaults rapl_defaults_hsw_server = { |
| .check_unit = rapl_check_unit_core, |
| .set_floor_freq = set_floor_freq_default, |
| .compute_time_window = rapl_compute_time_window_core, |
| .dram_domain_energy_unit = 15300, |
| }; |
| |
| static const struct rapl_defaults rapl_defaults_byt = { |
| .floor_freq_reg_addr = IOSF_CPU_POWER_BUDGET_CTL_BYT, |
| .check_unit = rapl_check_unit_atom, |
| .set_floor_freq = set_floor_freq_atom, |
| .compute_time_window = rapl_compute_time_window_atom, |
| }; |
| |
| static const struct rapl_defaults rapl_defaults_tng = { |
| .floor_freq_reg_addr = IOSF_CPU_POWER_BUDGET_CTL_TNG, |
| .check_unit = rapl_check_unit_atom, |
| .set_floor_freq = set_floor_freq_atom, |
| .compute_time_window = rapl_compute_time_window_atom, |
| }; |
| |
| static const struct rapl_defaults rapl_defaults_ann = { |
| .floor_freq_reg_addr = 0, |
| .check_unit = rapl_check_unit_atom, |
| .set_floor_freq = NULL, |
| .compute_time_window = rapl_compute_time_window_atom, |
| }; |
| |
| static const struct rapl_defaults rapl_defaults_cht = { |
| .floor_freq_reg_addr = 0, |
| .check_unit = rapl_check_unit_atom, |
| .set_floor_freq = NULL, |
| .compute_time_window = rapl_compute_time_window_atom, |
| }; |
| |
| static const struct x86_cpu_id rapl_ids[] __initconst = { |
| INTEL_CPU_FAM6(SANDYBRIDGE, rapl_defaults_core), |
| INTEL_CPU_FAM6(SANDYBRIDGE_X, rapl_defaults_core), |
| |
| INTEL_CPU_FAM6(IVYBRIDGE, rapl_defaults_core), |
| INTEL_CPU_FAM6(IVYBRIDGE_X, rapl_defaults_core), |
| |
| INTEL_CPU_FAM6(HASWELL_CORE, rapl_defaults_core), |
| INTEL_CPU_FAM6(HASWELL_ULT, rapl_defaults_core), |
| INTEL_CPU_FAM6(HASWELL_GT3E, rapl_defaults_core), |
| INTEL_CPU_FAM6(HASWELL_X, rapl_defaults_hsw_server), |
| |
| INTEL_CPU_FAM6(BROADWELL_CORE, rapl_defaults_core), |
| INTEL_CPU_FAM6(BROADWELL_GT3E, rapl_defaults_core), |
| INTEL_CPU_FAM6(BROADWELL_XEON_D, rapl_defaults_core), |
| INTEL_CPU_FAM6(BROADWELL_X, rapl_defaults_hsw_server), |
| |
| INTEL_CPU_FAM6(SKYLAKE_DESKTOP, rapl_defaults_core), |
| INTEL_CPU_FAM6(SKYLAKE_MOBILE, rapl_defaults_core), |
| INTEL_CPU_FAM6(SKYLAKE_X, rapl_defaults_hsw_server), |
| INTEL_CPU_FAM6(KABYLAKE_MOBILE, rapl_defaults_core), |
| INTEL_CPU_FAM6(KABYLAKE_DESKTOP, rapl_defaults_core), |
| INTEL_CPU_FAM6(CANNONLAKE_MOBILE, rapl_defaults_core), |
| INTEL_CPU_FAM6(ICELAKE_MOBILE, rapl_defaults_core), |
| |
| INTEL_CPU_FAM6(ATOM_SILVERMONT, rapl_defaults_byt), |
| INTEL_CPU_FAM6(ATOM_AIRMONT, rapl_defaults_cht), |
| INTEL_CPU_FAM6(ATOM_SILVERMONT_MID, rapl_defaults_tng), |
| INTEL_CPU_FAM6(ATOM_AIRMONT_MID, rapl_defaults_ann), |
| INTEL_CPU_FAM6(ATOM_GOLDMONT, rapl_defaults_core), |
| INTEL_CPU_FAM6(ATOM_GOLDMONT_PLUS, rapl_defaults_core), |
| INTEL_CPU_FAM6(ATOM_GOLDMONT_X, rapl_defaults_core), |
| INTEL_CPU_FAM6(ATOM_TREMONT_X, rapl_defaults_core), |
| |
| INTEL_CPU_FAM6(XEON_PHI_KNL, rapl_defaults_hsw_server), |
| INTEL_CPU_FAM6(XEON_PHI_KNM, rapl_defaults_hsw_server), |
| {} |
| }; |
| MODULE_DEVICE_TABLE(x86cpu, rapl_ids); |
| |
| /* Read once for all raw primitive data for domains */ |
| static void rapl_update_domain_data(struct rapl_package *rp) |
| { |
| int dmn, prim; |
| u64 val; |
| |
| for (dmn = 0; dmn < rp->nr_domains; dmn++) { |
| pr_debug("update package %d domain %s data\n", rp->id, |
| rp->domains[dmn].name); |
| /* exclude non-raw primitives */ |
| for (prim = 0; prim < NR_RAW_PRIMITIVES; prim++) { |
| if (!rapl_read_data_raw(&rp->domains[dmn], prim, |
| rpi[prim].unit, &val)) |
| rp->domains[dmn].rdd.primitives[prim] = val; |
| } |
| } |
| |
| } |
| |
| static void rapl_unregister_powercap(void) |
| { |
| if (platform_rapl_domain) { |
| powercap_unregister_zone(control_type, |
| &platform_rapl_domain->power_zone); |
| kfree(platform_rapl_domain); |
| } |
| powercap_unregister_control_type(control_type); |
| } |
| |
| static int rapl_package_register_powercap(struct rapl_package *rp) |
| { |
| struct rapl_domain *rd; |
| char dev_name[17]; /* max domain name = 7 + 1 + 8 for int + 1 for null*/ |
| struct powercap_zone *power_zone = NULL; |
| int nr_pl, ret; |
| |
| /* Update the domain data of the new package */ |
| rapl_update_domain_data(rp); |
| |
| /* first we register package domain as the parent zone*/ |
| for (rd = rp->domains; rd < rp->domains + rp->nr_domains; rd++) { |
| if (rd->id == RAPL_DOMAIN_PACKAGE) { |
| nr_pl = find_nr_power_limit(rd); |
| pr_debug("register socket %d package domain %s\n", |
| rp->id, rd->name); |
| memset(dev_name, 0, sizeof(dev_name)); |
| snprintf(dev_name, sizeof(dev_name), "%s-%d", |
| rd->name, rp->id); |
| power_zone = powercap_register_zone(&rd->power_zone, |
| control_type, |
| dev_name, NULL, |
| &zone_ops[rd->id], |
| nr_pl, |
| &constraint_ops); |
| if (IS_ERR(power_zone)) { |
| pr_debug("failed to register package, %d\n", |
| rp->id); |
| return PTR_ERR(power_zone); |
| } |
| /* track parent zone in per package/socket data */ |
| rp->power_zone = power_zone; |
| /* done, only one package domain per socket */ |
| break; |
| } |
| } |
| if (!power_zone) { |
| pr_err("no package domain found, unknown topology!\n"); |
| return -ENODEV; |
| } |
| /* now register domains as children of the socket/package*/ |
| for (rd = rp->domains; rd < rp->domains + rp->nr_domains; rd++) { |
| if (rd->id == RAPL_DOMAIN_PACKAGE) |
| continue; |
| /* number of power limits per domain varies */ |
| nr_pl = find_nr_power_limit(rd); |
| power_zone = powercap_register_zone(&rd->power_zone, |
| control_type, rd->name, |
| rp->power_zone, |
| &zone_ops[rd->id], nr_pl, |
| &constraint_ops); |
| |
| if (IS_ERR(power_zone)) { |
| pr_debug("failed to register power_zone, %d:%s:%s\n", |
| rp->id, rd->name, dev_name); |
| ret = PTR_ERR(power_zone); |
| goto err_cleanup; |
| } |
| } |
| return 0; |
| |
| err_cleanup: |
| /* |
| * Clean up previously initialized domains within the package if we |
| * failed after the first domain setup. |
| */ |
| while (--rd >= rp->domains) { |
| pr_debug("unregister package %d domain %s\n", rp->id, rd->name); |
| powercap_unregister_zone(control_type, &rd->power_zone); |
| } |
| |
| return ret; |
| } |
| |
| static int __init rapl_register_psys(void) |
| { |
| struct rapl_domain *rd; |
| struct powercap_zone *power_zone; |
| u64 val; |
| |
| if (rdmsrl_safe_on_cpu(0, MSR_PLATFORM_ENERGY_STATUS, &val) || !val) |
| return -ENODEV; |
| |
| if (rdmsrl_safe_on_cpu(0, MSR_PLATFORM_POWER_LIMIT, &val) || !val) |
| return -ENODEV; |
| |
| rd = kzalloc(sizeof(*rd), GFP_KERNEL); |
| if (!rd) |
| return -ENOMEM; |
| |
| rd->name = rapl_domain_names[RAPL_DOMAIN_PLATFORM]; |
| rd->id = RAPL_DOMAIN_PLATFORM; |
| rd->msrs[0] = MSR_PLATFORM_POWER_LIMIT; |
| rd->msrs[1] = MSR_PLATFORM_ENERGY_STATUS; |
| rd->rpl[0].prim_id = PL1_ENABLE; |
| rd->rpl[0].name = pl1_name; |
| rd->rpl[1].prim_id = PL2_ENABLE; |
| rd->rpl[1].name = pl2_name; |
| rd->rp = find_package_by_id(0); |
| |
| power_zone = powercap_register_zone(&rd->power_zone, control_type, |
| "psys", NULL, |
| &zone_ops[RAPL_DOMAIN_PLATFORM], |
| 2, &constraint_ops); |
| |
| if (IS_ERR(power_zone)) { |
| kfree(rd); |
| return PTR_ERR(power_zone); |
| } |
| |
| platform_rapl_domain = rd; |
| |
| return 0; |
| } |
| |
| static int __init rapl_register_powercap(void) |
| { |
| control_type = powercap_register_control_type(NULL, "intel-rapl", NULL); |
| if (IS_ERR(control_type)) { |
| pr_debug("failed to register powercap control_type.\n"); |
| return PTR_ERR(control_type); |
| } |
| return 0; |
| } |
| |
| static int rapl_check_domain(int cpu, int domain) |
| { |
| unsigned msr; |
| u64 val = 0; |
| |
| switch (domain) { |
| case RAPL_DOMAIN_PACKAGE: |
| msr = MSR_PKG_ENERGY_STATUS; |
| break; |
| case RAPL_DOMAIN_PP0: |
| msr = MSR_PP0_ENERGY_STATUS; |
| break; |
| case RAPL_DOMAIN_PP1: |
| msr = MSR_PP1_ENERGY_STATUS; |
| break; |
| case RAPL_DOMAIN_DRAM: |
| msr = MSR_DRAM_ENERGY_STATUS; |
| break; |
| case RAPL_DOMAIN_PLATFORM: |
| /* PSYS(PLATFORM) is not a CPU domain, so avoid printng error */ |
| return -EINVAL; |
| default: |
| pr_err("invalid domain id %d\n", domain); |
| return -EINVAL; |
| } |
| /* make sure domain counters are available and contains non-zero |
| * values, otherwise skip it. |
| */ |
| if (rdmsrl_safe_on_cpu(cpu, msr, &val) || !val) |
| return -ENODEV; |
| |
| return 0; |
| } |
| |
| |
| /* |
| * Check if power limits are available. Two cases when they are not available: |
| * 1. Locked by BIOS, in this case we still provide read-only access so that |
| * users can see what limit is set by the BIOS. |
| * 2. Some CPUs make some domains monitoring only which means PLx MSRs may not |
| * exist at all. In this case, we do not show the contraints in powercap. |
| * |
| * Called after domains are detected and initialized. |
| */ |
| static void rapl_detect_powerlimit(struct rapl_domain *rd) |
| { |
| u64 val64; |
| int i; |
| |
| /* check if the domain is locked by BIOS, ignore if MSR doesn't exist */ |
| if (!rapl_read_data_raw(rd, FW_LOCK, false, &val64)) { |
| if (val64) { |
| pr_info("RAPL package %d domain %s locked by BIOS\n", |
| rd->rp->id, rd->name); |
| rd->state |= DOMAIN_STATE_BIOS_LOCKED; |
| } |
| } |
| /* check if power limit MSRs exists, otherwise domain is monitoring only */ |
| for (i = 0; i < NR_POWER_LIMITS; i++) { |
| int prim = rd->rpl[i].prim_id; |
| if (rapl_read_data_raw(rd, prim, false, &val64)) |
| rd->rpl[i].name = NULL; |
| } |
| } |
| |
| /* Detect active and valid domains for the given CPU, caller must |
| * ensure the CPU belongs to the targeted package and CPU hotlug is disabled. |
| */ |
| static int rapl_detect_domains(struct rapl_package *rp, int cpu) |
| { |
| struct rapl_domain *rd; |
| int i; |
| |
| for (i = 0; i < RAPL_DOMAIN_MAX; i++) { |
| /* use physical package id to read counters */ |
| if (!rapl_check_domain(cpu, i)) { |
| rp->domain_map |= 1 << i; |
| pr_info("Found RAPL domain %s\n", rapl_domain_names[i]); |
| } |
| } |
| rp->nr_domains = bitmap_weight(&rp->domain_map, RAPL_DOMAIN_MAX); |
| if (!rp->nr_domains) { |
| pr_debug("no valid rapl domains found in package %d\n", rp->id); |
| return -ENODEV; |
| } |
| pr_debug("found %d domains on package %d\n", rp->nr_domains, rp->id); |
| |
| rp->domains = kcalloc(rp->nr_domains + 1, sizeof(struct rapl_domain), |
| GFP_KERNEL); |
| if (!rp->domains) |
| return -ENOMEM; |
| |
| rapl_init_domains(rp); |
| |
| for (rd = rp->domains; rd < rp->domains + rp->nr_domains; rd++) |
| rapl_detect_powerlimit(rd); |
| |
| return 0; |
| } |
| |
| /* called from CPU hotplug notifier, hotplug lock held */ |
| static void rapl_remove_package(struct rapl_package *rp) |
| { |
| struct rapl_domain *rd, *rd_package = NULL; |
| |
| package_power_limit_irq_restore(rp); |
| |
| for (rd = rp->domains; rd < rp->domains + rp->nr_domains; rd++) { |
| rapl_write_data_raw(rd, PL1_ENABLE, 0); |
| rapl_write_data_raw(rd, PL1_CLAMP, 0); |
| if (find_nr_power_limit(rd) > 1) { |
| rapl_write_data_raw(rd, PL2_ENABLE, 0); |
| rapl_write_data_raw(rd, PL2_CLAMP, 0); |
| } |
| if (rd->id == RAPL_DOMAIN_PACKAGE) { |
| rd_package = rd; |
| continue; |
| } |
| pr_debug("remove package, undo power limit on %d: %s\n", |
| rp->id, rd->name); |
| powercap_unregister_zone(control_type, &rd->power_zone); |
| } |
| /* do parent zone last */ |
| powercap_unregister_zone(control_type, &rd_package->power_zone); |
| list_del(&rp->plist); |
| kfree(rp); |
| } |
| |
| /* called from CPU hotplug notifier, hotplug lock held */ |
| static struct rapl_package *rapl_add_package(int cpu, int pkgid) |
| { |
| struct rapl_package *rp; |
| int ret; |
| |
| rp = kzalloc(sizeof(struct rapl_package), GFP_KERNEL); |
| if (!rp) |
| return ERR_PTR(-ENOMEM); |
| |
| /* add the new package to the list */ |
| rp->id = pkgid; |
| rp->lead_cpu = cpu; |
| |
| /* check if the package contains valid domains */ |
| if (rapl_detect_domains(rp, cpu) || |
| rapl_defaults->check_unit(rp, cpu)) { |
| ret = -ENODEV; |
| goto err_free_package; |
| } |
| ret = rapl_package_register_powercap(rp); |
| if (!ret) { |
| INIT_LIST_HEAD(&rp->plist); |
| list_add(&rp->plist, &rapl_packages); |
| return rp; |
| } |
| |
| err_free_package: |
| kfree(rp->domains); |
| kfree(rp); |
| return ERR_PTR(ret); |
| } |
| |
| /* Handles CPU hotplug on multi-socket systems. |
| * If a CPU goes online as the first CPU of the physical package |
| * we add the RAPL package to the system. Similarly, when the last |
| * CPU of the package is removed, we remove the RAPL package and its |
| * associated domains. Cooling devices are handled accordingly at |
| * per-domain level. |
| */ |
| static int rapl_cpu_online(unsigned int cpu) |
| { |
| int pkgid = topology_physical_package_id(cpu); |
| struct rapl_package *rp; |
| |
| rp = find_package_by_id(pkgid); |
| if (!rp) { |
| rp = rapl_add_package(cpu, pkgid); |
| if (IS_ERR(rp)) |
| return PTR_ERR(rp); |
| } |
| cpumask_set_cpu(cpu, &rp->cpumask); |
| return 0; |
| } |
| |
| static int rapl_cpu_down_prep(unsigned int cpu) |
| { |
| int pkgid = topology_physical_package_id(cpu); |
| struct rapl_package *rp; |
| int lead_cpu; |
| |
| rp = find_package_by_id(pkgid); |
| if (!rp) |
| return 0; |
| |
| cpumask_clear_cpu(cpu, &rp->cpumask); |
| lead_cpu = cpumask_first(&rp->cpumask); |
| if (lead_cpu >= nr_cpu_ids) |
| rapl_remove_package(rp); |
| else if (rp->lead_cpu == cpu) |
| rp->lead_cpu = lead_cpu; |
| return 0; |
| } |
| |
| static enum cpuhp_state pcap_rapl_online; |
| |
| static void power_limit_state_save(void) |
| { |
| struct rapl_package *rp; |
| struct rapl_domain *rd; |
| int nr_pl, ret, i; |
| |
| get_online_cpus(); |
| list_for_each_entry(rp, &rapl_packages, plist) { |
| if (!rp->power_zone) |
| continue; |
| rd = power_zone_to_rapl_domain(rp->power_zone); |
| nr_pl = find_nr_power_limit(rd); |
| for (i = 0; i < nr_pl; i++) { |
| switch (rd->rpl[i].prim_id) { |
| case PL1_ENABLE: |
| ret = rapl_read_data_raw(rd, |
| POWER_LIMIT1, |
| true, |
| &rd->rpl[i].last_power_limit); |
| if (ret) |
| rd->rpl[i].last_power_limit = 0; |
| break; |
| case PL2_ENABLE: |
| ret = rapl_read_data_raw(rd, |
| POWER_LIMIT2, |
| true, |
| &rd->rpl[i].last_power_limit); |
| if (ret) |
| rd->rpl[i].last_power_limit = 0; |
| break; |
| } |
| } |
| } |
| put_online_cpus(); |
| } |
| |
| static void power_limit_state_restore(void) |
| { |
| struct rapl_package *rp; |
| struct rapl_domain *rd; |
| int nr_pl, i; |
| |
| get_online_cpus(); |
| list_for_each_entry(rp, &rapl_packages, plist) { |
| if (!rp->power_zone) |
| continue; |
| rd = power_zone_to_rapl_domain(rp->power_zone); |
| nr_pl = find_nr_power_limit(rd); |
| for (i = 0; i < nr_pl; i++) { |
| switch (rd->rpl[i].prim_id) { |
| case PL1_ENABLE: |
| if (rd->rpl[i].last_power_limit) |
| rapl_write_data_raw(rd, |
| POWER_LIMIT1, |
| rd->rpl[i].last_power_limit); |
| break; |
| case PL2_ENABLE: |
| if (rd->rpl[i].last_power_limit) |
| rapl_write_data_raw(rd, |
| POWER_LIMIT2, |
| rd->rpl[i].last_power_limit); |
| break; |
| } |
| } |
| } |
| put_online_cpus(); |
| } |
| |
| static int rapl_pm_callback(struct notifier_block *nb, |
| unsigned long mode, void *_unused) |
| { |
| switch (mode) { |
| case PM_SUSPEND_PREPARE: |
| power_limit_state_save(); |
| break; |
| case PM_POST_SUSPEND: |
| power_limit_state_restore(); |
| break; |
| } |
| return NOTIFY_OK; |
| } |
| |
| static struct notifier_block rapl_pm_notifier = { |
| .notifier_call = rapl_pm_callback, |
| }; |
| |
| static int __init rapl_init(void) |
| { |
| const struct x86_cpu_id *id; |
| int ret; |
| |
| id = x86_match_cpu(rapl_ids); |
| if (!id) { |
| pr_err("driver does not support CPU family %d model %d\n", |
| boot_cpu_data.x86, boot_cpu_data.x86_model); |
| |
| return -ENODEV; |
| } |
| |
| rapl_defaults = (struct rapl_defaults *)id->driver_data; |
| |
| ret = rapl_register_powercap(); |
| if (ret) |
| return ret; |
| |
| ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "powercap/rapl:online", |
| rapl_cpu_online, rapl_cpu_down_prep); |
| if (ret < 0) |
| goto err_unreg; |
| pcap_rapl_online = ret; |
| |
| /* Don't bail out if PSys is not supported */ |
| rapl_register_psys(); |
| |
| ret = register_pm_notifier(&rapl_pm_notifier); |
| if (ret) |
| goto err_unreg_all; |
| |
| return 0; |
| |
| err_unreg_all: |
| cpuhp_remove_state(pcap_rapl_online); |
| |
| err_unreg: |
| rapl_unregister_powercap(); |
| return ret; |
| } |
| |
| static void __exit rapl_exit(void) |
| { |
| unregister_pm_notifier(&rapl_pm_notifier); |
| cpuhp_remove_state(pcap_rapl_online); |
| rapl_unregister_powercap(); |
| } |
| |
| module_init(rapl_init); |
| module_exit(rapl_exit); |
| |
| MODULE_DESCRIPTION("Driver for Intel RAPL (Running Average Power Limit)"); |
| MODULE_AUTHOR("Jacob Pan <jacob.jun.pan@intel.com>"); |
| MODULE_LICENSE("GPL v2"); |