| /* |
| * TX4927 setup routines |
| * Based on linux/arch/mips/txx9/rbtx4938/setup.c, |
| * and RBTX49xx patch from CELF patch archive. |
| * |
| * 2003-2005 (c) MontaVista Software, Inc. |
| * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007 |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| */ |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/delay.h> |
| #include <linux/param.h> |
| #include <linux/ptrace.h> |
| #include <linux/mtd/physmap.h> |
| #include <asm/reboot.h> |
| #include <asm/traps.h> |
| #include <asm/txx9irq.h> |
| #include <asm/txx9tmr.h> |
| #include <asm/txx9pio.h> |
| #include <asm/txx9/generic.h> |
| #include <asm/txx9/tx4927.h> |
| |
| static void __init tx4927_wdr_init(void) |
| { |
| /* report watchdog reset status */ |
| if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_WDRST) |
| pr_warning("Watchdog reset detected at 0x%lx\n", |
| read_c0_errorepc()); |
| /* clear WatchDogReset (W1C) */ |
| tx4927_ccfg_set(TX4927_CCFG_WDRST); |
| /* do reset on watchdog */ |
| tx4927_ccfg_set(TX4927_CCFG_WR); |
| } |
| |
| void __init tx4927_wdt_init(void) |
| { |
| txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL); |
| } |
| |
| static void tx4927_machine_restart(char *command) |
| { |
| local_irq_disable(); |
| pr_emerg("Rebooting (with %s watchdog reset)...\n", |
| (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_WDREXEN) ? |
| "external" : "internal"); |
| /* clear watchdog status */ |
| tx4927_ccfg_set(TX4927_CCFG_WDRST); /* W1C */ |
| txx9_wdt_now(TX4927_TMR_REG(2) & 0xfffffffffULL); |
| while (!(____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_WDRST)) |
| ; |
| mdelay(10); |
| if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_WDREXEN) { |
| pr_emerg("Rebooting (with internal watchdog reset)...\n"); |
| /* External WDRST failed. Do internal watchdog reset */ |
| tx4927_ccfg_clear(TX4927_CCFG_WDREXEN); |
| } |
| /* fallback */ |
| (*_machine_halt)(); |
| } |
| |
| void show_registers(struct pt_regs *regs); |
| static int tx4927_be_handler(struct pt_regs *regs, int is_fixup) |
| { |
| int data = regs->cp0_cause & 4; |
| console_verbose(); |
| pr_err("%cBE exception at %#lx\n", data ? 'D' : 'I', regs->cp0_epc); |
| pr_err("ccfg:%llx, toea:%llx\n", |
| (unsigned long long)____raw_readq(&tx4927_ccfgptr->ccfg), |
| (unsigned long long)____raw_readq(&tx4927_ccfgptr->toea)); |
| #ifdef CONFIG_PCI |
| tx4927_report_pcic_status(); |
| #endif |
| show_registers(regs); |
| panic("BusError!"); |
| } |
| static void __init tx4927_be_init(void) |
| { |
| board_be_handler = tx4927_be_handler; |
| } |
| |
| static struct resource tx4927_sdram_resource[4]; |
| |
| void __init tx4927_setup(void) |
| { |
| int i; |
| __u32 divmode; |
| unsigned int cpuclk = 0; |
| u64 ccfg; |
| |
| txx9_reg_res_init(TX4927_REV_PCODE(), TX4927_REG_BASE, |
| TX4927_REG_SIZE); |
| set_c0_config(TX49_CONF_CWFON); |
| |
| /* SDRAMC,EBUSC are configured by PROM */ |
| for (i = 0; i < 8; i++) { |
| if (!(TX4927_EBUSC_CR(i) & 0x8)) |
| continue; /* disabled */ |
| txx9_ce_res[i].start = (unsigned long)TX4927_EBUSC_BA(i); |
| txx9_ce_res[i].end = |
| txx9_ce_res[i].start + TX4927_EBUSC_SIZE(i) - 1; |
| request_resource(&iomem_resource, &txx9_ce_res[i]); |
| } |
| |
| /* clocks */ |
| ccfg = ____raw_readq(&tx4927_ccfgptr->ccfg); |
| if (txx9_master_clock) { |
| /* calculate gbus_clock and cpu_clock from master_clock */ |
| divmode = (__u32)ccfg & TX4927_CCFG_DIVMODE_MASK; |
| switch (divmode) { |
| case TX4927_CCFG_DIVMODE_8: |
| case TX4927_CCFG_DIVMODE_10: |
| case TX4927_CCFG_DIVMODE_12: |
| case TX4927_CCFG_DIVMODE_16: |
| txx9_gbus_clock = txx9_master_clock * 4; break; |
| default: |
| txx9_gbus_clock = txx9_master_clock; |
| } |
| switch (divmode) { |
| case TX4927_CCFG_DIVMODE_2: |
| case TX4927_CCFG_DIVMODE_8: |
| cpuclk = txx9_gbus_clock * 2; break; |
| case TX4927_CCFG_DIVMODE_2_5: |
| case TX4927_CCFG_DIVMODE_10: |
| cpuclk = txx9_gbus_clock * 5 / 2; break; |
| case TX4927_CCFG_DIVMODE_3: |
| case TX4927_CCFG_DIVMODE_12: |
| cpuclk = txx9_gbus_clock * 3; break; |
| case TX4927_CCFG_DIVMODE_4: |
| case TX4927_CCFG_DIVMODE_16: |
| cpuclk = txx9_gbus_clock * 4; break; |
| } |
| txx9_cpu_clock = cpuclk; |
| } else { |
| if (txx9_cpu_clock == 0) |
| txx9_cpu_clock = 200000000; /* 200MHz */ |
| /* calculate gbus_clock and master_clock from cpu_clock */ |
| cpuclk = txx9_cpu_clock; |
| divmode = (__u32)ccfg & TX4927_CCFG_DIVMODE_MASK; |
| switch (divmode) { |
| case TX4927_CCFG_DIVMODE_2: |
| case TX4927_CCFG_DIVMODE_8: |
| txx9_gbus_clock = cpuclk / 2; break; |
| case TX4927_CCFG_DIVMODE_2_5: |
| case TX4927_CCFG_DIVMODE_10: |
| txx9_gbus_clock = cpuclk * 2 / 5; break; |
| case TX4927_CCFG_DIVMODE_3: |
| case TX4927_CCFG_DIVMODE_12: |
| txx9_gbus_clock = cpuclk / 3; break; |
| case TX4927_CCFG_DIVMODE_4: |
| case TX4927_CCFG_DIVMODE_16: |
| txx9_gbus_clock = cpuclk / 4; break; |
| } |
| switch (divmode) { |
| case TX4927_CCFG_DIVMODE_8: |
| case TX4927_CCFG_DIVMODE_10: |
| case TX4927_CCFG_DIVMODE_12: |
| case TX4927_CCFG_DIVMODE_16: |
| txx9_master_clock = txx9_gbus_clock / 4; break; |
| default: |
| txx9_master_clock = txx9_gbus_clock; |
| } |
| } |
| /* change default value to udelay/mdelay take reasonable time */ |
| loops_per_jiffy = txx9_cpu_clock / HZ / 2; |
| |
| /* CCFG */ |
| tx4927_wdr_init(); |
| /* clear BusErrorOnWrite flag (W1C) */ |
| tx4927_ccfg_set(TX4927_CCFG_BEOW); |
| /* enable Timeout BusError */ |
| if (txx9_ccfg_toeon) |
| tx4927_ccfg_set(TX4927_CCFG_TOE); |
| |
| /* DMA selection */ |
| txx9_clear64(&tx4927_ccfgptr->pcfg, TX4927_PCFG_DMASEL_ALL); |
| |
| /* Use external clock for external arbiter */ |
| if (!(____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCIARB)) |
| txx9_clear64(&tx4927_ccfgptr->pcfg, TX4927_PCFG_PCICLKEN_ALL); |
| |
| printk(KERN_INFO "%s -- %dMHz(M%dMHz) CRIR:%08x CCFG:%llx PCFG:%llx\n", |
| txx9_pcode_str, |
| (cpuclk + 500000) / 1000000, |
| (txx9_master_clock + 500000) / 1000000, |
| (__u32)____raw_readq(&tx4927_ccfgptr->crir), |
| (unsigned long long)____raw_readq(&tx4927_ccfgptr->ccfg), |
| (unsigned long long)____raw_readq(&tx4927_ccfgptr->pcfg)); |
| |
| printk(KERN_INFO "%s SDRAMC --", txx9_pcode_str); |
| for (i = 0; i < 4; i++) { |
| __u64 cr = TX4927_SDRAMC_CR(i); |
| unsigned long base, size; |
| if (!((__u32)cr & 0x00000400)) |
| continue; /* disabled */ |
| base = (unsigned long)(cr >> 49) << 21; |
| size = (((unsigned long)(cr >> 33) & 0x7fff) + 1) << 21; |
| printk(" CR%d:%016llx", i, (unsigned long long)cr); |
| tx4927_sdram_resource[i].name = "SDRAM"; |
| tx4927_sdram_resource[i].start = base; |
| tx4927_sdram_resource[i].end = base + size - 1; |
| tx4927_sdram_resource[i].flags = IORESOURCE_MEM; |
| request_resource(&iomem_resource, &tx4927_sdram_resource[i]); |
| } |
| printk(" TR:%09llx\n", |
| (unsigned long long)____raw_readq(&tx4927_sdramcptr->tr)); |
| |
| /* TMR */ |
| /* disable all timers */ |
| for (i = 0; i < TX4927_NR_TMR; i++) |
| txx9_tmr_init(TX4927_TMR_REG(i) & 0xfffffffffULL); |
| |
| /* PIO */ |
| txx9_gpio_init(TX4927_PIO_REG & 0xfffffffffULL, 0, TX4927_NUM_PIO); |
| __raw_writel(0, &tx4927_pioptr->maskcpu); |
| __raw_writel(0, &tx4927_pioptr->maskext); |
| |
| _machine_restart = tx4927_machine_restart; |
| board_be_init = tx4927_be_init; |
| } |
| |
| void __init tx4927_time_init(unsigned int tmrnr) |
| { |
| if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_TINTDIS) |
| txx9_clockevent_init(TX4927_TMR_REG(tmrnr) & 0xfffffffffULL, |
| TXX9_IRQ_BASE + TX4927_IR_TMR(tmrnr), |
| TXX9_IMCLK); |
| } |
| |
| void __init tx4927_sio_init(unsigned int sclk, unsigned int cts_mask) |
| { |
| int i; |
| |
| for (i = 0; i < 2; i++) |
| txx9_sio_init(TX4927_SIO_REG(i) & 0xfffffffffULL, |
| TXX9_IRQ_BASE + TX4927_IR_SIO(i), |
| i, sclk, (1 << i) & cts_mask); |
| } |
| |
| void __init tx4927_mtd_init(int ch) |
| { |
| struct physmap_flash_data pdata = { |
| .width = TX4927_EBUSC_WIDTH(ch) / 8, |
| }; |
| unsigned long start = txx9_ce_res[ch].start; |
| unsigned long size = txx9_ce_res[ch].end - start + 1; |
| |
| if (!(TX4927_EBUSC_CR(ch) & 0x8)) |
| return; /* disabled */ |
| txx9_physmap_flash_init(ch, start, size, &pdata); |
| } |
| |
| static void __init tx4927_stop_unused_modules(void) |
| { |
| __u64 pcfg, rst = 0, ckd = 0; |
| char buf[128]; |
| |
| buf[0] = '\0'; |
| local_irq_disable(); |
| pcfg = ____raw_readq(&tx4927_ccfgptr->pcfg); |
| if (!(pcfg & TX4927_PCFG_SEL2)) { |
| rst |= TX4927_CLKCTR_ACLRST; |
| ckd |= TX4927_CLKCTR_ACLCKD; |
| strcat(buf, " ACLC"); |
| } |
| if (rst | ckd) { |
| txx9_set64(&tx4927_ccfgptr->clkctr, rst); |
| txx9_set64(&tx4927_ccfgptr->clkctr, ckd); |
| } |
| local_irq_enable(); |
| if (buf[0]) |
| pr_info("%s: stop%s\n", txx9_pcode_str, buf); |
| } |
| |
| static int __init tx4927_late_init(void) |
| { |
| if (txx9_pcode != 0x4927) |
| return -ENODEV; |
| tx4927_stop_unused_modules(); |
| return 0; |
| } |
| late_initcall(tx4927_late_init); |