| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Raspberry Pi driver for firmware controlled clocks |
| * |
| * Even though clk-bcm2835 provides an interface to the hardware registers for |
| * the system clocks we've had to factor out 'pllb' as the firmware 'owns' it. |
| * We're not allowed to change it directly as we might race with the |
| * over-temperature and under-voltage protections provided by the firmware. |
| * |
| * Copyright (C) 2019 Nicolas Saenz Julienne <nsaenzjulienne@suse.de> |
| */ |
| |
| #include <linux/clkdev.h> |
| #include <linux/clk-provider.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| |
| #include <soc/bcm2835/raspberrypi-firmware.h> |
| |
| enum rpi_firmware_clk_id { |
| RPI_FIRMWARE_EMMC_CLK_ID = 1, |
| RPI_FIRMWARE_UART_CLK_ID, |
| RPI_FIRMWARE_ARM_CLK_ID, |
| RPI_FIRMWARE_CORE_CLK_ID, |
| RPI_FIRMWARE_V3D_CLK_ID, |
| RPI_FIRMWARE_H264_CLK_ID, |
| RPI_FIRMWARE_ISP_CLK_ID, |
| RPI_FIRMWARE_SDRAM_CLK_ID, |
| RPI_FIRMWARE_PIXEL_CLK_ID, |
| RPI_FIRMWARE_PWM_CLK_ID, |
| RPI_FIRMWARE_HEVC_CLK_ID, |
| RPI_FIRMWARE_EMMC2_CLK_ID, |
| RPI_FIRMWARE_M2MC_CLK_ID, |
| RPI_FIRMWARE_PIXEL_BVB_CLK_ID, |
| RPI_FIRMWARE_NUM_CLK_ID, |
| }; |
| |
| static char *rpi_firmware_clk_names[] = { |
| [RPI_FIRMWARE_EMMC_CLK_ID] = "emmc", |
| [RPI_FIRMWARE_UART_CLK_ID] = "uart", |
| [RPI_FIRMWARE_ARM_CLK_ID] = "arm", |
| [RPI_FIRMWARE_CORE_CLK_ID] = "core", |
| [RPI_FIRMWARE_V3D_CLK_ID] = "v3d", |
| [RPI_FIRMWARE_H264_CLK_ID] = "h264", |
| [RPI_FIRMWARE_ISP_CLK_ID] = "isp", |
| [RPI_FIRMWARE_SDRAM_CLK_ID] = "sdram", |
| [RPI_FIRMWARE_PIXEL_CLK_ID] = "pixel", |
| [RPI_FIRMWARE_PWM_CLK_ID] = "pwm", |
| [RPI_FIRMWARE_HEVC_CLK_ID] = "hevc", |
| [RPI_FIRMWARE_EMMC2_CLK_ID] = "emmc2", |
| [RPI_FIRMWARE_M2MC_CLK_ID] = "m2mc", |
| [RPI_FIRMWARE_PIXEL_BVB_CLK_ID] = "pixel-bvb", |
| }; |
| |
| #define RPI_FIRMWARE_STATE_ENABLE_BIT BIT(0) |
| #define RPI_FIRMWARE_STATE_WAIT_BIT BIT(1) |
| |
| struct raspberrypi_clk { |
| struct device *dev; |
| struct rpi_firmware *firmware; |
| struct platform_device *cpufreq; |
| }; |
| |
| struct raspberrypi_clk_data { |
| struct clk_hw hw; |
| |
| unsigned int id; |
| |
| struct raspberrypi_clk *rpi; |
| }; |
| |
| /* |
| * Structure of the message passed to Raspberry Pi's firmware in order to |
| * change clock rates. The 'disable_turbo' option is only available to the ARM |
| * clock (pllb) which we enable by default as turbo mode will alter multiple |
| * clocks at once. |
| * |
| * Even though we're able to access the clock registers directly we're bound to |
| * use the firmware interface as the firmware ultimately takes care of |
| * mitigating overheating/undervoltage situations and we would be changing |
| * frequencies behind his back. |
| * |
| * For more information on the firmware interface check: |
| * https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface |
| */ |
| struct raspberrypi_firmware_prop { |
| __le32 id; |
| __le32 val; |
| __le32 disable_turbo; |
| } __packed; |
| |
| static int raspberrypi_clock_property(struct rpi_firmware *firmware, |
| const struct raspberrypi_clk_data *data, |
| u32 tag, u32 *val) |
| { |
| struct raspberrypi_firmware_prop msg = { |
| .id = cpu_to_le32(data->id), |
| .val = cpu_to_le32(*val), |
| .disable_turbo = cpu_to_le32(1), |
| }; |
| int ret; |
| |
| ret = rpi_firmware_property(firmware, tag, &msg, sizeof(msg)); |
| if (ret) |
| return ret; |
| |
| *val = le32_to_cpu(msg.val); |
| |
| return 0; |
| } |
| |
| static int raspberrypi_fw_is_prepared(struct clk_hw *hw) |
| { |
| struct raspberrypi_clk_data *data = |
| container_of(hw, struct raspberrypi_clk_data, hw); |
| struct raspberrypi_clk *rpi = data->rpi; |
| u32 val = 0; |
| int ret; |
| |
| ret = raspberrypi_clock_property(rpi->firmware, data, |
| RPI_FIRMWARE_GET_CLOCK_STATE, &val); |
| if (ret) |
| return 0; |
| |
| return !!(val & RPI_FIRMWARE_STATE_ENABLE_BIT); |
| } |
| |
| |
| static unsigned long raspberrypi_fw_get_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct raspberrypi_clk_data *data = |
| container_of(hw, struct raspberrypi_clk_data, hw); |
| struct raspberrypi_clk *rpi = data->rpi; |
| u32 val = 0; |
| int ret; |
| |
| ret = raspberrypi_clock_property(rpi->firmware, data, |
| RPI_FIRMWARE_GET_CLOCK_RATE, &val); |
| if (ret) |
| return ret; |
| |
| return val; |
| } |
| |
| static int raspberrypi_fw_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct raspberrypi_clk_data *data = |
| container_of(hw, struct raspberrypi_clk_data, hw); |
| struct raspberrypi_clk *rpi = data->rpi; |
| u32 _rate = rate; |
| int ret; |
| |
| ret = raspberrypi_clock_property(rpi->firmware, data, |
| RPI_FIRMWARE_SET_CLOCK_RATE, &_rate); |
| if (ret) |
| dev_err_ratelimited(rpi->dev, "Failed to change %s frequency: %d", |
| clk_hw_get_name(hw), ret); |
| |
| return ret; |
| } |
| |
| static int raspberrypi_fw_dumb_determine_rate(struct clk_hw *hw, |
| struct clk_rate_request *req) |
| { |
| /* |
| * The firmware will do the rounding but that isn't part of |
| * the interface with the firmware, so we just do our best |
| * here. |
| */ |
| req->rate = clamp(req->rate, req->min_rate, req->max_rate); |
| return 0; |
| } |
| |
| static const struct clk_ops raspberrypi_firmware_clk_ops = { |
| .is_prepared = raspberrypi_fw_is_prepared, |
| .recalc_rate = raspberrypi_fw_get_rate, |
| .determine_rate = raspberrypi_fw_dumb_determine_rate, |
| .set_rate = raspberrypi_fw_set_rate, |
| }; |
| |
| static struct clk_hw *raspberrypi_clk_register(struct raspberrypi_clk *rpi, |
| unsigned int parent, |
| unsigned int id) |
| { |
| struct raspberrypi_clk_data *data; |
| struct clk_init_data init = {}; |
| u32 min_rate, max_rate; |
| int ret; |
| |
| data = devm_kzalloc(rpi->dev, sizeof(*data), GFP_KERNEL); |
| if (!data) |
| return ERR_PTR(-ENOMEM); |
| data->rpi = rpi; |
| data->id = id; |
| |
| init.name = devm_kasprintf(rpi->dev, GFP_KERNEL, |
| "fw-clk-%s", |
| rpi_firmware_clk_names[id]); |
| init.ops = &raspberrypi_firmware_clk_ops; |
| init.flags = CLK_GET_RATE_NOCACHE; |
| |
| data->hw.init = &init; |
| |
| ret = raspberrypi_clock_property(rpi->firmware, data, |
| RPI_FIRMWARE_GET_MIN_CLOCK_RATE, |
| &min_rate); |
| if (ret) { |
| dev_err(rpi->dev, "Failed to get clock %d min freq: %d", |
| id, ret); |
| return ERR_PTR(ret); |
| } |
| |
| ret = raspberrypi_clock_property(rpi->firmware, data, |
| RPI_FIRMWARE_GET_MAX_CLOCK_RATE, |
| &max_rate); |
| if (ret) { |
| dev_err(rpi->dev, "Failed to get clock %d max freq: %d\n", |
| id, ret); |
| return ERR_PTR(ret); |
| } |
| |
| ret = devm_clk_hw_register(rpi->dev, &data->hw); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| clk_hw_set_rate_range(&data->hw, min_rate, max_rate); |
| |
| if (id == RPI_FIRMWARE_ARM_CLK_ID) { |
| ret = devm_clk_hw_register_clkdev(rpi->dev, &data->hw, |
| NULL, "cpu0"); |
| if (ret) { |
| dev_err(rpi->dev, "Failed to initialize clkdev\n"); |
| return ERR_PTR(ret); |
| } |
| } |
| |
| return &data->hw; |
| } |
| |
| struct rpi_firmware_get_clocks_response { |
| u32 parent; |
| u32 id; |
| }; |
| |
| static int raspberrypi_discover_clocks(struct raspberrypi_clk *rpi, |
| struct clk_hw_onecell_data *data) |
| { |
| struct rpi_firmware_get_clocks_response *clks; |
| int ret; |
| |
| clks = devm_kcalloc(rpi->dev, |
| sizeof(*clks), RPI_FIRMWARE_NUM_CLK_ID, |
| GFP_KERNEL); |
| if (!clks) |
| return -ENOMEM; |
| |
| ret = rpi_firmware_property(rpi->firmware, RPI_FIRMWARE_GET_CLOCKS, |
| clks, |
| sizeof(*clks) * RPI_FIRMWARE_NUM_CLK_ID); |
| if (ret) |
| return ret; |
| |
| while (clks->id) { |
| struct clk_hw *hw; |
| |
| switch (clks->id) { |
| case RPI_FIRMWARE_ARM_CLK_ID: |
| case RPI_FIRMWARE_CORE_CLK_ID: |
| case RPI_FIRMWARE_M2MC_CLK_ID: |
| case RPI_FIRMWARE_V3D_CLK_ID: |
| hw = raspberrypi_clk_register(rpi, clks->parent, |
| clks->id); |
| if (IS_ERR(hw)) |
| return PTR_ERR(hw); |
| |
| data->hws[clks->id] = hw; |
| data->num = clks->id + 1; |
| fallthrough; |
| |
| default: |
| clks++; |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int raspberrypi_clk_probe(struct platform_device *pdev) |
| { |
| struct clk_hw_onecell_data *clk_data; |
| struct device_node *firmware_node; |
| struct device *dev = &pdev->dev; |
| struct rpi_firmware *firmware; |
| struct raspberrypi_clk *rpi; |
| int ret; |
| |
| /* |
| * We can be probed either through the an old-fashioned |
| * platform device registration or through a DT node that is a |
| * child of the firmware node. Handle both cases. |
| */ |
| if (dev->of_node) |
| firmware_node = of_get_parent(dev->of_node); |
| else |
| firmware_node = of_find_compatible_node(NULL, NULL, |
| "raspberrypi,bcm2835-firmware"); |
| if (!firmware_node) { |
| dev_err(dev, "Missing firmware node\n"); |
| return -ENOENT; |
| } |
| |
| firmware = rpi_firmware_get(firmware_node); |
| of_node_put(firmware_node); |
| if (!firmware) |
| return -EPROBE_DEFER; |
| |
| rpi = devm_kzalloc(dev, sizeof(*rpi), GFP_KERNEL); |
| if (!rpi) |
| return -ENOMEM; |
| |
| rpi->dev = dev; |
| rpi->firmware = firmware; |
| platform_set_drvdata(pdev, rpi); |
| |
| clk_data = devm_kzalloc(dev, struct_size(clk_data, hws, |
| RPI_FIRMWARE_NUM_CLK_ID), |
| GFP_KERNEL); |
| if (!clk_data) |
| return -ENOMEM; |
| |
| ret = raspberrypi_discover_clocks(rpi, clk_data); |
| if (ret) |
| return ret; |
| |
| ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, |
| clk_data); |
| if (ret) |
| return ret; |
| |
| rpi->cpufreq = platform_device_register_data(dev, "raspberrypi-cpufreq", |
| -1, NULL, 0); |
| |
| return 0; |
| } |
| |
| static int raspberrypi_clk_remove(struct platform_device *pdev) |
| { |
| struct raspberrypi_clk *rpi = platform_get_drvdata(pdev); |
| |
| platform_device_unregister(rpi->cpufreq); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id raspberrypi_clk_match[] = { |
| { .compatible = "raspberrypi,firmware-clocks" }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, raspberrypi_clk_match); |
| |
| static struct platform_driver raspberrypi_clk_driver = { |
| .driver = { |
| .name = "raspberrypi-clk", |
| .of_match_table = raspberrypi_clk_match, |
| }, |
| .probe = raspberrypi_clk_probe, |
| .remove = raspberrypi_clk_remove, |
| }; |
| module_platform_driver(raspberrypi_clk_driver); |
| |
| MODULE_AUTHOR("Nicolas Saenz Julienne <nsaenzjulienne@suse.de>"); |
| MODULE_DESCRIPTION("Raspberry Pi firmware clock driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:raspberrypi-clk"); |