| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2014 Samsung Electronics Co., Ltd. |
| * Author: Tomasz Figa <t.figa@samsung.com> |
| * |
| * Clock driver for Exynos clock output |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| #include <linux/module.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm.h> |
| #include <linux/property.h> |
| |
| #define EXYNOS_CLKOUT_NR_CLKS 1 |
| #define EXYNOS_CLKOUT_PARENTS 32 |
| |
| #define EXYNOS_PMU_DEBUG_REG 0xa00 |
| #define EXYNOS_CLKOUT_DISABLE_SHIFT 0 |
| #define EXYNOS_CLKOUT_MUX_SHIFT 8 |
| #define EXYNOS4_CLKOUT_MUX_MASK 0xf |
| #define EXYNOS5_CLKOUT_MUX_MASK 0x1f |
| |
| struct exynos_clkout { |
| struct clk_gate gate; |
| struct clk_mux mux; |
| spinlock_t slock; |
| void __iomem *reg; |
| struct device_node *np; |
| u32 pmu_debug_save; |
| struct clk_hw_onecell_data data; |
| }; |
| |
| struct exynos_clkout_variant { |
| u32 mux_mask; |
| }; |
| |
| static const struct exynos_clkout_variant exynos_clkout_exynos4 = { |
| .mux_mask = EXYNOS4_CLKOUT_MUX_MASK, |
| }; |
| |
| static const struct exynos_clkout_variant exynos_clkout_exynos5 = { |
| .mux_mask = EXYNOS5_CLKOUT_MUX_MASK, |
| }; |
| |
| static const struct of_device_id exynos_clkout_ids[] = { |
| { |
| .compatible = "samsung,exynos3250-pmu", |
| .data = &exynos_clkout_exynos4, |
| }, { |
| .compatible = "samsung,exynos4210-pmu", |
| .data = &exynos_clkout_exynos4, |
| }, { |
| .compatible = "samsung,exynos4212-pmu", |
| .data = &exynos_clkout_exynos4, |
| }, { |
| .compatible = "samsung,exynos4412-pmu", |
| .data = &exynos_clkout_exynos4, |
| }, { |
| .compatible = "samsung,exynos5250-pmu", |
| .data = &exynos_clkout_exynos5, |
| }, { |
| .compatible = "samsung,exynos5410-pmu", |
| .data = &exynos_clkout_exynos5, |
| }, { |
| .compatible = "samsung,exynos5420-pmu", |
| .data = &exynos_clkout_exynos5, |
| }, { |
| .compatible = "samsung,exynos5433-pmu", |
| .data = &exynos_clkout_exynos5, |
| }, { } |
| }; |
| MODULE_DEVICE_TABLE(of, exynos_clkout_ids); |
| |
| /* |
| * Device will be instantiated as child of PMU device without its own |
| * device node. Therefore match compatibles against parent. |
| */ |
| static int exynos_clkout_match_parent_dev(struct device *dev, u32 *mux_mask) |
| { |
| const struct exynos_clkout_variant *variant; |
| |
| if (!dev->parent) { |
| dev_err(dev, "not instantiated from MFD\n"); |
| return -EINVAL; |
| } |
| |
| variant = device_get_match_data(dev->parent); |
| if (!variant) { |
| dev_err(dev, "cannot match parent device\n"); |
| return -EINVAL; |
| } |
| |
| *mux_mask = variant->mux_mask; |
| |
| return 0; |
| } |
| |
| static int exynos_clkout_probe(struct platform_device *pdev) |
| { |
| const char *parent_names[EXYNOS_CLKOUT_PARENTS]; |
| struct clk *parents[EXYNOS_CLKOUT_PARENTS]; |
| struct exynos_clkout *clkout; |
| int parent_count, ret, i; |
| u32 mux_mask; |
| |
| clkout = devm_kzalloc(&pdev->dev, |
| struct_size(clkout, data.hws, EXYNOS_CLKOUT_NR_CLKS), |
| GFP_KERNEL); |
| if (!clkout) |
| return -ENOMEM; |
| |
| ret = exynos_clkout_match_parent_dev(&pdev->dev, &mux_mask); |
| if (ret) |
| return ret; |
| |
| clkout->np = pdev->dev.of_node; |
| if (!clkout->np) { |
| /* |
| * pdev->dev.parent was checked by exynos_clkout_match_parent_dev() |
| * so it is not NULL. |
| */ |
| clkout->np = pdev->dev.parent->of_node; |
| } |
| |
| platform_set_drvdata(pdev, clkout); |
| |
| spin_lock_init(&clkout->slock); |
| |
| parent_count = 0; |
| for (i = 0; i < EXYNOS_CLKOUT_PARENTS; ++i) { |
| char name[] = "clkoutXX"; |
| |
| snprintf(name, sizeof(name), "clkout%d", i); |
| parents[i] = of_clk_get_by_name(clkout->np, name); |
| if (IS_ERR(parents[i])) { |
| parent_names[i] = "none"; |
| continue; |
| } |
| |
| parent_names[i] = __clk_get_name(parents[i]); |
| parent_count = i + 1; |
| } |
| |
| if (!parent_count) |
| return -EINVAL; |
| |
| clkout->reg = of_iomap(clkout->np, 0); |
| if (!clkout->reg) { |
| ret = -ENODEV; |
| goto clks_put; |
| } |
| |
| clkout->gate.reg = clkout->reg + EXYNOS_PMU_DEBUG_REG; |
| clkout->gate.bit_idx = EXYNOS_CLKOUT_DISABLE_SHIFT; |
| clkout->gate.flags = CLK_GATE_SET_TO_DISABLE; |
| clkout->gate.lock = &clkout->slock; |
| |
| clkout->mux.reg = clkout->reg + EXYNOS_PMU_DEBUG_REG; |
| clkout->mux.mask = mux_mask; |
| clkout->mux.shift = EXYNOS_CLKOUT_MUX_SHIFT; |
| clkout->mux.lock = &clkout->slock; |
| |
| clkout->data.hws[0] = clk_hw_register_composite(NULL, "clkout", |
| parent_names, parent_count, &clkout->mux.hw, |
| &clk_mux_ops, NULL, NULL, &clkout->gate.hw, |
| &clk_gate_ops, CLK_SET_RATE_PARENT |
| | CLK_SET_RATE_NO_REPARENT); |
| if (IS_ERR(clkout->data.hws[0])) { |
| ret = PTR_ERR(clkout->data.hws[0]); |
| goto err_unmap; |
| } |
| |
| clkout->data.num = EXYNOS_CLKOUT_NR_CLKS; |
| ret = of_clk_add_hw_provider(clkout->np, of_clk_hw_onecell_get, &clkout->data); |
| if (ret) |
| goto err_clk_unreg; |
| |
| return 0; |
| |
| err_clk_unreg: |
| clk_hw_unregister(clkout->data.hws[0]); |
| err_unmap: |
| iounmap(clkout->reg); |
| clks_put: |
| for (i = 0; i < EXYNOS_CLKOUT_PARENTS; ++i) |
| if (!IS_ERR(parents[i])) |
| clk_put(parents[i]); |
| |
| dev_err(&pdev->dev, "failed to register clkout clock\n"); |
| |
| return ret; |
| } |
| |
| static void exynos_clkout_remove(struct platform_device *pdev) |
| { |
| struct exynos_clkout *clkout = platform_get_drvdata(pdev); |
| |
| of_clk_del_provider(clkout->np); |
| clk_hw_unregister(clkout->data.hws[0]); |
| iounmap(clkout->reg); |
| } |
| |
| static int __maybe_unused exynos_clkout_suspend(struct device *dev) |
| { |
| struct exynos_clkout *clkout = dev_get_drvdata(dev); |
| |
| clkout->pmu_debug_save = readl(clkout->reg + EXYNOS_PMU_DEBUG_REG); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused exynos_clkout_resume(struct device *dev) |
| { |
| struct exynos_clkout *clkout = dev_get_drvdata(dev); |
| |
| writel(clkout->pmu_debug_save, clkout->reg + EXYNOS_PMU_DEBUG_REG); |
| |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(exynos_clkout_pm_ops, exynos_clkout_suspend, |
| exynos_clkout_resume); |
| |
| static struct platform_driver exynos_clkout_driver = { |
| .driver = { |
| .name = "exynos-clkout", |
| .of_match_table = exynos_clkout_ids, |
| .pm = &exynos_clkout_pm_ops, |
| }, |
| .probe = exynos_clkout_probe, |
| .remove_new = exynos_clkout_remove, |
| }; |
| module_platform_driver(exynos_clkout_driver); |
| |
| MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>"); |
| MODULE_AUTHOR("Tomasz Figa <tomasz.figa@gmail.com>"); |
| MODULE_DESCRIPTION("Samsung Exynos clock output driver"); |
| MODULE_LICENSE("GPL"); |