blob: 8a165be1a82144fc0c766286eec12cda3d38e794 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2021 Google Inc.
*
* The DP AUX bus is used for devices that are connected over a DisplayPort
* AUX bus. The device on the far side of the bus is referred to as an
* endpoint in this code.
*
* There is only one device connected to the DP AUX bus: an eDP panel.
* Though historically panels (even DP panels) have been modeled as simple
* platform devices, putting them under the DP AUX bus allows the panel driver
* to perform transactions on that bus.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
#include <drm/display/drm_dp_aux_bus.h>
#include <drm/display/drm_dp_helper.h>
struct dp_aux_ep_device_with_data {
struct dp_aux_ep_device aux_ep;
int (*done_probing)(struct drm_dp_aux *aux);
};
/**
* dp_aux_ep_match() - The match function for the dp_aux_bus.
* @dev: The device to match.
* @drv: The driver to try to match against.
*
* At the moment, we just match on device tree.
*
* Return: True if this driver matches this device; false otherwise.
*/
static int dp_aux_ep_match(struct device *dev, struct device_driver *drv)
{
return !!of_match_device(drv->of_match_table, dev);
}
/**
* dp_aux_ep_probe() - The probe function for the dp_aux_bus.
* @dev: The device to probe.
*
* Calls through to the endpoint driver probe.
*
* Return: 0 if no error or negative error code.
*/
static int dp_aux_ep_probe(struct device *dev)
{
struct dp_aux_ep_driver *aux_ep_drv = to_dp_aux_ep_drv(dev->driver);
struct dp_aux_ep_device *aux_ep = to_dp_aux_ep_dev(dev);
struct dp_aux_ep_device_with_data *aux_ep_with_data =
container_of(aux_ep, struct dp_aux_ep_device_with_data, aux_ep);
int ret;
ret = dev_pm_domain_attach(dev, true);
if (ret)
return dev_err_probe(dev, ret, "Failed to attach to PM Domain\n");
ret = aux_ep_drv->probe(aux_ep);
if (ret)
goto err_attached;
if (aux_ep_with_data->done_probing) {
ret = aux_ep_with_data->done_probing(aux_ep->aux);
if (ret) {
/*
* The done_probing() callback should not return
* -EPROBE_DEFER to us. If it does, we treat it as an
* error. Passing it on as-is would cause the _panel_
* to defer.
*/
if (ret == -EPROBE_DEFER) {
dev_err(dev,
"DP AUX done_probing() can't defer\n");
ret = -EINVAL;
}
goto err_probed;
}
}
return 0;
err_probed:
if (aux_ep_drv->remove)
aux_ep_drv->remove(aux_ep);
err_attached:
dev_pm_domain_detach(dev, true);
return ret;
}
/**
* dp_aux_ep_remove() - The remove function for the dp_aux_bus.
* @dev: The device to remove.
*
* Calls through to the endpoint driver remove.
*/
static void dp_aux_ep_remove(struct device *dev)
{
struct dp_aux_ep_driver *aux_ep_drv = to_dp_aux_ep_drv(dev->driver);
struct dp_aux_ep_device *aux_ep = to_dp_aux_ep_dev(dev);
if (aux_ep_drv->remove)
aux_ep_drv->remove(aux_ep);
dev_pm_domain_detach(dev, true);
}
/**
* dp_aux_ep_shutdown() - The shutdown function for the dp_aux_bus.
* @dev: The device to shutdown.
*
* Calls through to the endpoint driver shutdown.
*/
static void dp_aux_ep_shutdown(struct device *dev)
{
struct dp_aux_ep_driver *aux_ep_drv;
if (!dev->driver)
return;
aux_ep_drv = to_dp_aux_ep_drv(dev->driver);
if (aux_ep_drv->shutdown)
aux_ep_drv->shutdown(to_dp_aux_ep_dev(dev));
}
static struct bus_type dp_aux_bus_type = {
.name = "dp-aux",
.match = dp_aux_ep_match,
.probe = dp_aux_ep_probe,
.remove = dp_aux_ep_remove,
.shutdown = dp_aux_ep_shutdown,
};
static ssize_t modalias_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return of_device_modalias(dev, buf, PAGE_SIZE);
}
static DEVICE_ATTR_RO(modalias);
static struct attribute *dp_aux_ep_dev_attrs[] = {
&dev_attr_modalias.attr,
NULL,
};
ATTRIBUTE_GROUPS(dp_aux_ep_dev);
/**
* dp_aux_ep_dev_release() - Free memory for the dp_aux_ep device
* @dev: The device to free.
*/
static void dp_aux_ep_dev_release(struct device *dev)
{
struct dp_aux_ep_device *aux_ep = to_dp_aux_ep_dev(dev);
struct dp_aux_ep_device_with_data *aux_ep_with_data =
container_of(aux_ep, struct dp_aux_ep_device_with_data, aux_ep);
kfree(aux_ep_with_data);
}
static int dp_aux_ep_dev_modalias(const struct device *dev, struct kobj_uevent_env *env)
{
return of_device_uevent_modalias(dev, env);
}
static struct device_type dp_aux_device_type_type = {
.groups = dp_aux_ep_dev_groups,
.uevent = dp_aux_ep_dev_modalias,
.release = dp_aux_ep_dev_release,
};
/**
* of_dp_aux_ep_destroy() - Destroy an DP AUX endpoint device
* @dev: The device to destroy.
* @data: Not used
*
* This is just used as a callback by of_dp_aux_depopulate_bus() and
* is called for _all_ of the child devices of the device providing the AUX bus.
* We'll only act on those that are of type "dp_aux_bus_type".
*
* This function is effectively an inverse of what's in
* of_dp_aux_populate_bus(). NOTE: since we only populate one child
* then it's expected that only one device will match all the "if" tests in
* this function and get to the device_unregister().
*
* Return: 0 if no error or negative error code.
*/
static int of_dp_aux_ep_destroy(struct device *dev, void *data)
{
struct device_node *np = dev->of_node;
if (dev->bus != &dp_aux_bus_type)
return 0;
if (!of_node_check_flag(np, OF_POPULATED))
return 0;
of_node_clear_flag(np, OF_POPULATED);
of_node_put(np);
device_unregister(dev);
return 0;
}
/**
* of_dp_aux_depopulate_bus() - Undo of_dp_aux_populate_bus
* @aux: The AUX channel whose device we want to depopulate
*
* This will destroy the device that was created
* by of_dp_aux_populate_bus().
*/
void of_dp_aux_depopulate_bus(struct drm_dp_aux *aux)
{
device_for_each_child_reverse(aux->dev, NULL, of_dp_aux_ep_destroy);
}
EXPORT_SYMBOL_GPL(of_dp_aux_depopulate_bus);
/**
* of_dp_aux_populate_bus() - Populate the endpoint device on the DP AUX
* @aux: The AUX channel whose device we want to populate. It is required that
* drm_dp_aux_init() has already been called for this AUX channel.
* @done_probing: Callback functions to call after EP device finishes probing.
* Will not be called if there are no EP devices and this
* function will return -ENODEV.
*
* This will populate the device (expected to be an eDP panel) under the
* "aux-bus" node of the device providing the AUX channel (AKA aux->dev).
*
* When this function finishes, it is _possible_ (but not guaranteed) that
* our sub-device will have finished probing. It should be noted that if our
* sub-device returns -EPROBE_DEFER or is probing asynchronously for some
* reason that we will not return any error codes ourselves but our
* sub-device will _not_ have actually probed successfully yet.
*
* In many cases it's important for the caller of this function to be notified
* when our sub device finishes probing. Our sub device is expected to be an
* eDP panel and the caller is expected to be an eDP controller. The eDP
* controller needs to be able to get a reference to the panel when it finishes
* probing. For this reason the caller can pass in a function pointer that
* will be called when our sub-device finishes probing.
*
* If this function succeeds you should later make sure you call
* of_dp_aux_depopulate_bus() to undo it, or just use the devm version
* of this function.
*
* Return: 0 if no error or negative error code; returns -ENODEV if there are
* no children. The done_probing() function won't be called in that
* case.
*/
int of_dp_aux_populate_bus(struct drm_dp_aux *aux,
int (*done_probing)(struct drm_dp_aux *aux))
{
struct device_node *bus = NULL, *np = NULL;
struct dp_aux_ep_device *aux_ep;
struct dp_aux_ep_device_with_data *aux_ep_with_data;
int ret;
/* drm_dp_aux_init() should have been called already; warn if not */
WARN_ON_ONCE(!aux->ddc.algo);
if (!aux->dev->of_node)
return -ENODEV;
bus = of_get_child_by_name(aux->dev->of_node, "aux-bus");
if (!bus)
return -ENODEV;
np = of_get_next_available_child(bus, NULL);
of_node_put(bus);
if (!np)
return -ENODEV;
if (of_node_test_and_set_flag(np, OF_POPULATED)) {
dev_err(aux->dev, "DP AUX EP device already populated\n");
ret = -EINVAL;
goto err_did_get_np;
}
aux_ep_with_data = kzalloc(sizeof(*aux_ep_with_data), GFP_KERNEL);
if (!aux_ep_with_data) {
ret = -ENOMEM;
goto err_did_set_populated;
}
aux_ep_with_data->done_probing = done_probing;
aux_ep = &aux_ep_with_data->aux_ep;
aux_ep->aux = aux;
aux_ep->dev.parent = aux->dev;
aux_ep->dev.bus = &dp_aux_bus_type;
aux_ep->dev.type = &dp_aux_device_type_type;
aux_ep->dev.of_node = of_node_get(np);
dev_set_name(&aux_ep->dev, "aux-%s", dev_name(aux->dev));
ret = device_register(&aux_ep->dev);
if (ret) {
dev_err(aux->dev, "Failed to create AUX EP for %pOF: %d\n", np, ret);
/*
* As per docs of device_register(), call this instead
* of kfree() directly for error cases.
*/
put_device(&aux_ep->dev);
goto err_did_set_populated;
}
return 0;
err_did_set_populated:
of_node_clear_flag(np, OF_POPULATED);
err_did_get_np:
of_node_put(np);
return ret;
}
EXPORT_SYMBOL_GPL(of_dp_aux_populate_bus);
static void of_dp_aux_depopulate_bus_void(void *data)
{
of_dp_aux_depopulate_bus(data);
}
/**
* devm_of_dp_aux_populate_bus() - devm wrapper for of_dp_aux_populate_bus()
* @aux: The AUX channel whose device we want to populate
* @done_probing: Callback functions to call after EP device finishes probing.
* Will not be called if there are no EP devices and this
* function will return -ENODEV.
*
* Handles freeing w/ devm on the device "aux->dev".
*
* Return: 0 if no error or negative error code; returns -ENODEV if there are
* no children. The done_probing() function won't be called in that
* case.
*/
int devm_of_dp_aux_populate_bus(struct drm_dp_aux *aux,
int (*done_probing)(struct drm_dp_aux *aux))
{
int ret;
ret = of_dp_aux_populate_bus(aux, done_probing);
if (ret)
return ret;
return devm_add_action_or_reset(aux->dev,
of_dp_aux_depopulate_bus_void, aux);
}
EXPORT_SYMBOL_GPL(devm_of_dp_aux_populate_bus);
int __dp_aux_dp_driver_register(struct dp_aux_ep_driver *drv, struct module *owner)
{
drv->driver.owner = owner;
drv->driver.bus = &dp_aux_bus_type;
return driver_register(&drv->driver);
}
EXPORT_SYMBOL_GPL(__dp_aux_dp_driver_register);
void dp_aux_dp_driver_unregister(struct dp_aux_ep_driver *drv)
{
driver_unregister(&drv->driver);
}
EXPORT_SYMBOL_GPL(dp_aux_dp_driver_unregister);
static int __init dp_aux_bus_init(void)
{
int ret;
ret = bus_register(&dp_aux_bus_type);
if (ret)
return ret;
return 0;
}
static void __exit dp_aux_bus_exit(void)
{
bus_unregister(&dp_aux_bus_type);
}
subsys_initcall(dp_aux_bus_init);
module_exit(dp_aux_bus_exit);
MODULE_AUTHOR("Douglas Anderson <dianders@chromium.org>");
MODULE_DESCRIPTION("DRM DisplayPort AUX bus");
MODULE_LICENSE("GPL v2");