| // SPDX-License-Identifier: GPL-2.0-only |
| /* ir-mce_kbd-decoder.c - A decoder for the RC6-ish keyboard/mouse IR protocol |
| * used by the Microsoft Remote Keyboard for Windows Media Center Edition, |
| * referred to by Microsoft's Windows Media Center remote specification docs |
| * as "an internal protocol called MCIR-2". |
| * |
| * Copyright (C) 2011 by Jarod Wilson <jarod@redhat.com> |
| */ |
| #include <linux/module.h> |
| |
| #include "rc-core-priv.h" |
| |
| /* |
| * This decoder currently supports: |
| * - MCIR-2 29-bit IR signals used for mouse movement and buttons |
| * - MCIR-2 32-bit IR signals used for standard keyboard keys |
| * |
| * The media keys on the keyboard send RC-6 signals that are indistinguishable |
| * from the keys of the same name on the stock MCE remote, and will be handled |
| * by the standard RC-6 decoder, and be made available to the system via the |
| * input device for the remote, rather than the keyboard/mouse one. |
| */ |
| |
| #define MCIR2_UNIT 333 /* us */ |
| #define MCIR2_HEADER_NBITS 5 |
| #define MCIR2_MOUSE_NBITS 29 |
| #define MCIR2_KEYBOARD_NBITS 32 |
| #define MCIR2_PREFIX_PULSE (8 * MCIR2_UNIT) |
| #define MCIR2_PREFIX_SPACE (1 * MCIR2_UNIT) |
| #define MCIR2_MAX_LEN (3 * MCIR2_UNIT) |
| #define MCIR2_BIT_START (1 * MCIR2_UNIT) |
| #define MCIR2_BIT_END (1 * MCIR2_UNIT) |
| #define MCIR2_BIT_0 (1 * MCIR2_UNIT) |
| #define MCIR2_BIT_SET (2 * MCIR2_UNIT) |
| #define MCIR2_MODE_MASK 0xf /* for the header bits */ |
| #define MCIR2_KEYBOARD_HEADER 0x4 |
| #define MCIR2_MOUSE_HEADER 0x1 |
| #define MCIR2_MASK_KEYS_START 0xe0 |
| |
| enum mce_kbd_mode { |
| MCIR2_MODE_KEYBOARD, |
| MCIR2_MODE_MOUSE, |
| MCIR2_MODE_UNKNOWN, |
| }; |
| |
| enum mce_kbd_state { |
| STATE_INACTIVE, |
| STATE_HEADER_BIT_START, |
| STATE_HEADER_BIT_END, |
| STATE_BODY_BIT_START, |
| STATE_BODY_BIT_END, |
| STATE_FINISHED, |
| }; |
| |
| static unsigned char kbd_keycodes[256] = { |
| KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_A, |
| KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, |
| KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, |
| KEY_L, KEY_M, KEY_N, KEY_O, KEY_P, |
| KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U, |
| KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, |
| KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, |
| KEY_6, KEY_7, KEY_8, KEY_9, KEY_0, |
| KEY_ENTER, KEY_ESC, KEY_BACKSPACE, KEY_TAB, KEY_SPACE, |
| KEY_MINUS, KEY_EQUAL, KEY_LEFTBRACE, KEY_RIGHTBRACE, KEY_BACKSLASH, |
| KEY_BACKSLASH, KEY_SEMICOLON, KEY_APOSTROPHE, KEY_GRAVE, KEY_COMMA, |
| KEY_DOT, KEY_SLASH, KEY_CAPSLOCK, KEY_F1, KEY_F2, |
| KEY_F3, KEY_F4, KEY_F5, KEY_F6, KEY_F7, |
| KEY_F8, KEY_F9, KEY_F10, KEY_F11, KEY_F12, |
| KEY_SYSRQ, KEY_SCROLLLOCK, KEY_PAUSE, KEY_INSERT, KEY_HOME, |
| KEY_PAGEUP, KEY_DELETE, KEY_END, KEY_PAGEDOWN, KEY_RIGHT, |
| KEY_LEFT, KEY_DOWN, KEY_UP, KEY_NUMLOCK, KEY_KPSLASH, |
| KEY_KPASTERISK, KEY_KPMINUS, KEY_KPPLUS, KEY_KPENTER, KEY_KP1, |
| KEY_KP2, KEY_KP3, KEY_KP4, KEY_KP5, KEY_KP6, |
| KEY_KP7, KEY_KP8, KEY_KP9, KEY_KP0, KEY_KPDOT, |
| KEY_102ND, KEY_COMPOSE, KEY_POWER, KEY_KPEQUAL, KEY_F13, |
| KEY_F14, KEY_F15, KEY_F16, KEY_F17, KEY_F18, |
| KEY_F19, KEY_F20, KEY_F21, KEY_F22, KEY_F23, |
| KEY_F24, KEY_OPEN, KEY_HELP, KEY_PROPS, KEY_FRONT, |
| KEY_STOP, KEY_AGAIN, KEY_UNDO, KEY_CUT, KEY_COPY, |
| KEY_PASTE, KEY_FIND, KEY_MUTE, KEY_VOLUMEUP, KEY_VOLUMEDOWN, |
| KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_KPCOMMA, KEY_RESERVED, |
| KEY_RO, KEY_KATAKANAHIRAGANA, KEY_YEN, KEY_HENKAN, KEY_MUHENKAN, |
| KEY_KPJPCOMMA, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_HANGUEL, |
| KEY_HANJA, KEY_KATAKANA, KEY_HIRAGANA, KEY_ZENKAKUHANKAKU, KEY_RESERVED, |
| KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, |
| KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, |
| KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, |
| KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, |
| KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, |
| KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, |
| KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, |
| KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, |
| KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, |
| KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, |
| KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, |
| KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, |
| KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, |
| KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, |
| KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_LEFTCTRL, |
| KEY_LEFTSHIFT, KEY_LEFTALT, KEY_LEFTMETA, KEY_RIGHTCTRL, KEY_RIGHTSHIFT, |
| KEY_RIGHTALT, KEY_RIGHTMETA, KEY_PLAYPAUSE, KEY_STOPCD, KEY_PREVIOUSSONG, |
| KEY_NEXTSONG, KEY_EJECTCD, KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_MUTE, |
| KEY_WWW, KEY_BACK, KEY_FORWARD, KEY_STOP, KEY_FIND, |
| KEY_SCROLLUP, KEY_SCROLLDOWN, KEY_EDIT, KEY_SLEEP, KEY_COFFEE, |
| KEY_REFRESH, KEY_CALC, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, |
| KEY_RESERVED |
| }; |
| |
| static void mce_kbd_rx_timeout(struct timer_list *t) |
| { |
| struct ir_raw_event_ctrl *raw = from_timer(raw, t, mce_kbd.rx_timeout); |
| unsigned char maskcode; |
| unsigned long flags; |
| int i; |
| |
| dev_dbg(&raw->dev->dev, "timer callback clearing all keys\n"); |
| |
| spin_lock_irqsave(&raw->mce_kbd.keylock, flags); |
| |
| if (time_is_before_eq_jiffies(raw->mce_kbd.rx_timeout.expires)) { |
| for (i = 0; i < 7; i++) { |
| maskcode = kbd_keycodes[MCIR2_MASK_KEYS_START + i]; |
| input_report_key(raw->dev->input_dev, maskcode, 0); |
| } |
| |
| for (i = 0; i < MCIR2_MASK_KEYS_START; i++) |
| input_report_key(raw->dev->input_dev, kbd_keycodes[i], |
| 0); |
| |
| input_sync(raw->dev->input_dev); |
| } |
| spin_unlock_irqrestore(&raw->mce_kbd.keylock, flags); |
| } |
| |
| static enum mce_kbd_mode mce_kbd_mode(struct mce_kbd_dec *data) |
| { |
| switch (data->header & MCIR2_MODE_MASK) { |
| case MCIR2_KEYBOARD_HEADER: |
| return MCIR2_MODE_KEYBOARD; |
| case MCIR2_MOUSE_HEADER: |
| return MCIR2_MODE_MOUSE; |
| default: |
| return MCIR2_MODE_UNKNOWN; |
| } |
| } |
| |
| static void ir_mce_kbd_process_keyboard_data(struct rc_dev *dev, u32 scancode) |
| { |
| u8 keydata1 = (scancode >> 8) & 0xff; |
| u8 keydata2 = (scancode >> 16) & 0xff; |
| u8 shiftmask = scancode & 0xff; |
| unsigned char maskcode; |
| int i, keystate; |
| |
| dev_dbg(&dev->dev, "keyboard: keydata2 = 0x%02x, keydata1 = 0x%02x, shiftmask = 0x%02x\n", |
| keydata2, keydata1, shiftmask); |
| |
| for (i = 0; i < 7; i++) { |
| maskcode = kbd_keycodes[MCIR2_MASK_KEYS_START + i]; |
| if (shiftmask & (1 << i)) |
| keystate = 1; |
| else |
| keystate = 0; |
| input_report_key(dev->input_dev, maskcode, keystate); |
| } |
| |
| if (keydata1) |
| input_report_key(dev->input_dev, kbd_keycodes[keydata1], 1); |
| if (keydata2) |
| input_report_key(dev->input_dev, kbd_keycodes[keydata2], 1); |
| |
| if (!keydata1 && !keydata2) { |
| for (i = 0; i < MCIR2_MASK_KEYS_START; i++) |
| input_report_key(dev->input_dev, kbd_keycodes[i], 0); |
| } |
| } |
| |
| static void ir_mce_kbd_process_mouse_data(struct rc_dev *dev, u32 scancode) |
| { |
| /* raw mouse coordinates */ |
| u8 xdata = (scancode >> 7) & 0x7f; |
| u8 ydata = (scancode >> 14) & 0x7f; |
| int x, y; |
| /* mouse buttons */ |
| bool right = scancode & 0x40; |
| bool left = scancode & 0x20; |
| |
| if (xdata & 0x40) |
| x = -((~xdata & 0x7f) + 1); |
| else |
| x = xdata; |
| |
| if (ydata & 0x40) |
| y = -((~ydata & 0x7f) + 1); |
| else |
| y = ydata; |
| |
| dev_dbg(&dev->dev, "mouse: x = %d, y = %d, btns = %s%s\n", |
| x, y, left ? "L" : "", right ? "R" : ""); |
| |
| input_report_rel(dev->input_dev, REL_X, x); |
| input_report_rel(dev->input_dev, REL_Y, y); |
| |
| input_report_key(dev->input_dev, BTN_LEFT, left); |
| input_report_key(dev->input_dev, BTN_RIGHT, right); |
| } |
| |
| /** |
| * ir_mce_kbd_decode() - Decode one mce_kbd pulse or space |
| * @dev: the struct rc_dev descriptor of the device |
| * @ev: the struct ir_raw_event descriptor of the pulse/space |
| * |
| * This function returns -EINVAL if the pulse violates the state machine |
| */ |
| static int ir_mce_kbd_decode(struct rc_dev *dev, struct ir_raw_event ev) |
| { |
| struct mce_kbd_dec *data = &dev->raw->mce_kbd; |
| u32 scancode; |
| unsigned long delay; |
| struct lirc_scancode lsc = {}; |
| |
| if (!is_timing_event(ev)) { |
| if (ev.overflow) |
| data->state = STATE_INACTIVE; |
| return 0; |
| } |
| |
| if (!geq_margin(ev.duration, MCIR2_UNIT, MCIR2_UNIT / 2)) |
| goto out; |
| |
| again: |
| dev_dbg(&dev->dev, "started at state %i (%uus %s)\n", |
| data->state, ev.duration, TO_STR(ev.pulse)); |
| |
| if (!geq_margin(ev.duration, MCIR2_UNIT, MCIR2_UNIT / 2)) |
| return 0; |
| |
| switch (data->state) { |
| |
| case STATE_INACTIVE: |
| if (!ev.pulse) |
| break; |
| |
| /* Note: larger margin on first pulse since each MCIR2_UNIT |
| is quite short and some hardware takes some time to |
| adjust to the signal */ |
| if (!eq_margin(ev.duration, MCIR2_PREFIX_PULSE, MCIR2_UNIT)) |
| break; |
| |
| data->state = STATE_HEADER_BIT_START; |
| data->count = 0; |
| data->header = 0; |
| return 0; |
| |
| case STATE_HEADER_BIT_START: |
| if (geq_margin(ev.duration, MCIR2_MAX_LEN, MCIR2_UNIT / 2)) |
| break; |
| |
| data->header <<= 1; |
| if (ev.pulse) |
| data->header |= 1; |
| data->count++; |
| data->state = STATE_HEADER_BIT_END; |
| return 0; |
| |
| case STATE_HEADER_BIT_END: |
| decrease_duration(&ev, MCIR2_BIT_END); |
| |
| if (data->count != MCIR2_HEADER_NBITS) { |
| data->state = STATE_HEADER_BIT_START; |
| goto again; |
| } |
| |
| switch (mce_kbd_mode(data)) { |
| case MCIR2_MODE_KEYBOARD: |
| data->wanted_bits = MCIR2_KEYBOARD_NBITS; |
| break; |
| case MCIR2_MODE_MOUSE: |
| data->wanted_bits = MCIR2_MOUSE_NBITS; |
| break; |
| default: |
| dev_dbg(&dev->dev, "not keyboard or mouse data\n"); |
| goto out; |
| } |
| |
| data->count = 0; |
| data->body = 0; |
| data->state = STATE_BODY_BIT_START; |
| goto again; |
| |
| case STATE_BODY_BIT_START: |
| if (geq_margin(ev.duration, MCIR2_MAX_LEN, MCIR2_UNIT / 2)) |
| break; |
| |
| data->body <<= 1; |
| if (ev.pulse) |
| data->body |= 1; |
| data->count++; |
| data->state = STATE_BODY_BIT_END; |
| return 0; |
| |
| case STATE_BODY_BIT_END: |
| if (data->count == data->wanted_bits) |
| data->state = STATE_FINISHED; |
| else |
| data->state = STATE_BODY_BIT_START; |
| |
| decrease_duration(&ev, MCIR2_BIT_END); |
| goto again; |
| |
| case STATE_FINISHED: |
| if (ev.pulse) |
| break; |
| |
| switch (data->wanted_bits) { |
| case MCIR2_KEYBOARD_NBITS: |
| scancode = data->body & 0xffffff; |
| dev_dbg(&dev->dev, "keyboard data 0x%08x\n", |
| data->body); |
| spin_lock(&data->keylock); |
| if (scancode) { |
| delay = usecs_to_jiffies(dev->timeout) + |
| msecs_to_jiffies(100); |
| mod_timer(&data->rx_timeout, jiffies + delay); |
| } else { |
| del_timer(&data->rx_timeout); |
| } |
| /* Pass data to keyboard buffer parser */ |
| ir_mce_kbd_process_keyboard_data(dev, scancode); |
| spin_unlock(&data->keylock); |
| lsc.rc_proto = RC_PROTO_MCIR2_KBD; |
| break; |
| case MCIR2_MOUSE_NBITS: |
| scancode = data->body & 0x1fffff; |
| dev_dbg(&dev->dev, "mouse data 0x%06x\n", scancode); |
| /* Pass data to mouse buffer parser */ |
| ir_mce_kbd_process_mouse_data(dev, scancode); |
| lsc.rc_proto = RC_PROTO_MCIR2_MSE; |
| break; |
| default: |
| dev_dbg(&dev->dev, "not keyboard or mouse data\n"); |
| goto out; |
| } |
| |
| lsc.scancode = scancode; |
| lirc_scancode_event(dev, &lsc); |
| data->state = STATE_INACTIVE; |
| input_event(dev->input_dev, EV_MSC, MSC_SCAN, scancode); |
| input_sync(dev->input_dev); |
| return 0; |
| } |
| |
| out: |
| dev_dbg(&dev->dev, "failed at state %i (%uus %s)\n", |
| data->state, ev.duration, TO_STR(ev.pulse)); |
| data->state = STATE_INACTIVE; |
| return -EINVAL; |
| } |
| |
| static int ir_mce_kbd_register(struct rc_dev *dev) |
| { |
| struct mce_kbd_dec *mce_kbd = &dev->raw->mce_kbd; |
| |
| timer_setup(&mce_kbd->rx_timeout, mce_kbd_rx_timeout, 0); |
| spin_lock_init(&mce_kbd->keylock); |
| |
| return 0; |
| } |
| |
| static int ir_mce_kbd_unregister(struct rc_dev *dev) |
| { |
| struct mce_kbd_dec *mce_kbd = &dev->raw->mce_kbd; |
| |
| del_timer_sync(&mce_kbd->rx_timeout); |
| |
| return 0; |
| } |
| |
| static const struct ir_raw_timings_manchester ir_mce_kbd_timings = { |
| .leader_pulse = MCIR2_PREFIX_PULSE, |
| .invert = 1, |
| .clock = MCIR2_UNIT, |
| .trailer_space = MCIR2_UNIT * 10, |
| }; |
| |
| /** |
| * ir_mce_kbd_encode() - Encode a scancode as a stream of raw events |
| * |
| * @protocol: protocol to encode |
| * @scancode: scancode to encode |
| * @events: array of raw ir events to write into |
| * @max: maximum size of @events |
| * |
| * Returns: The number of events written. |
| * -ENOBUFS if there isn't enough space in the array to fit the |
| * encoding. In this case all @max events will have been written. |
| */ |
| static int ir_mce_kbd_encode(enum rc_proto protocol, u32 scancode, |
| struct ir_raw_event *events, unsigned int max) |
| { |
| struct ir_raw_event *e = events; |
| int len, ret; |
| u64 raw; |
| |
| if (protocol == RC_PROTO_MCIR2_KBD) { |
| raw = scancode | |
| ((u64)MCIR2_KEYBOARD_HEADER << MCIR2_KEYBOARD_NBITS); |
| len = MCIR2_KEYBOARD_NBITS + MCIR2_HEADER_NBITS; |
| } else { |
| raw = scancode | |
| ((u64)MCIR2_MOUSE_HEADER << MCIR2_MOUSE_NBITS); |
| len = MCIR2_MOUSE_NBITS + MCIR2_HEADER_NBITS; |
| } |
| |
| ret = ir_raw_gen_manchester(&e, max, &ir_mce_kbd_timings, len, raw); |
| if (ret < 0) |
| return ret; |
| |
| return e - events; |
| } |
| |
| static struct ir_raw_handler mce_kbd_handler = { |
| .protocols = RC_PROTO_BIT_MCIR2_KBD | RC_PROTO_BIT_MCIR2_MSE, |
| .decode = ir_mce_kbd_decode, |
| .encode = ir_mce_kbd_encode, |
| .raw_register = ir_mce_kbd_register, |
| .raw_unregister = ir_mce_kbd_unregister, |
| .carrier = 36000, |
| .min_timeout = MCIR2_MAX_LEN + MCIR2_UNIT / 2, |
| }; |
| |
| static int __init ir_mce_kbd_decode_init(void) |
| { |
| ir_raw_handler_register(&mce_kbd_handler); |
| |
| printk(KERN_INFO "IR MCE Keyboard/mouse protocol handler initialized\n"); |
| return 0; |
| } |
| |
| static void __exit ir_mce_kbd_decode_exit(void) |
| { |
| ir_raw_handler_unregister(&mce_kbd_handler); |
| } |
| |
| module_init(ir_mce_kbd_decode_init); |
| module_exit(ir_mce_kbd_decode_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>"); |
| MODULE_DESCRIPTION("MCE Keyboard/mouse IR protocol decoder"); |