| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * I2C access driver for TI TPS6594/TPS6593/LP8764 PMICs |
| * |
| * Copyright (C) 2023 BayLibre Incorporated - https://www.baylibre.com/ |
| */ |
| |
| #include <linux/crc8.h> |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/of_device.h> |
| #include <linux/regmap.h> |
| |
| #include <linux/mfd/tps6594.h> |
| |
| static bool enable_crc; |
| module_param(enable_crc, bool, 0444); |
| MODULE_PARM_DESC(enable_crc, "Enable CRC feature for I2C interface"); |
| |
| DECLARE_CRC8_TABLE(tps6594_i2c_crc_table); |
| |
| static int tps6594_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) |
| { |
| int ret = i2c_transfer(adap, msgs, num); |
| |
| if (ret == num) |
| return 0; |
| else if (ret < 0) |
| return ret; |
| else |
| return -EIO; |
| } |
| |
| static int tps6594_i2c_reg_read_with_crc(struct i2c_client *client, u8 page, u8 reg, u8 *val) |
| { |
| struct i2c_msg msgs[2]; |
| u8 buf_rx[] = { 0, 0 }; |
| /* I2C address = I2C base address + Page index */ |
| const u8 addr = client->addr + page; |
| /* |
| * CRC is calculated from every bit included in the protocol |
| * except the ACK bits from the target. Byte stream is: |
| * - B0: (I2C_addr_7bits << 1) | WR_bit, with WR_bit = 0 |
| * - B1: reg |
| * - B2: (I2C_addr_7bits << 1) | RD_bit, with RD_bit = 1 |
| * - B3: val |
| * - B4: CRC from B0-B1-B2-B3 |
| */ |
| u8 crc_data[] = { addr << 1, reg, addr << 1 | 1, 0 }; |
| int ret; |
| |
| /* Write register */ |
| msgs[0].addr = addr; |
| msgs[0].flags = 0; |
| msgs[0].len = 1; |
| msgs[0].buf = ® |
| |
| /* Read data and CRC */ |
| msgs[1].addr = msgs[0].addr; |
| msgs[1].flags = I2C_M_RD; |
| msgs[1].len = 2; |
| msgs[1].buf = buf_rx; |
| |
| ret = tps6594_i2c_transfer(client->adapter, msgs, 2); |
| if (ret < 0) |
| return ret; |
| |
| crc_data[sizeof(crc_data) - 1] = *val = buf_rx[0]; |
| if (buf_rx[1] != crc8(tps6594_i2c_crc_table, crc_data, sizeof(crc_data), CRC8_INIT_VALUE)) |
| return -EIO; |
| |
| return ret; |
| } |
| |
| static int tps6594_i2c_reg_write_with_crc(struct i2c_client *client, u8 page, u8 reg, u8 val) |
| { |
| struct i2c_msg msg; |
| u8 buf[] = { reg, val, 0 }; |
| /* I2C address = I2C base address + Page index */ |
| const u8 addr = client->addr + page; |
| /* |
| * CRC is calculated from every bit included in the protocol |
| * except the ACK bits from the target. Byte stream is: |
| * - B0: (I2C_addr_7bits << 1) | WR_bit, with WR_bit = 0 |
| * - B1: reg |
| * - B2: val |
| * - B3: CRC from B0-B1-B2 |
| */ |
| const u8 crc_data[] = { addr << 1, reg, val }; |
| |
| /* Write register, data and CRC */ |
| msg.addr = addr; |
| msg.flags = client->flags & I2C_M_TEN; |
| msg.len = sizeof(buf); |
| msg.buf = buf; |
| |
| buf[msg.len - 1] = crc8(tps6594_i2c_crc_table, crc_data, sizeof(crc_data), CRC8_INIT_VALUE); |
| |
| return tps6594_i2c_transfer(client->adapter, &msg, 1); |
| } |
| |
| static int tps6594_i2c_read(void *context, const void *reg_buf, size_t reg_size, |
| void *val_buf, size_t val_size) |
| { |
| struct i2c_client *client = context; |
| struct tps6594 *tps = i2c_get_clientdata(client); |
| struct i2c_msg msgs[2]; |
| const u8 *reg_bytes = reg_buf; |
| u8 *val_bytes = val_buf; |
| const u8 page = reg_bytes[1]; |
| u8 reg = reg_bytes[0]; |
| int ret = 0; |
| int i; |
| |
| if (tps->use_crc) { |
| /* |
| * Auto-increment feature does not support CRC protocol. |
| * Converts the bulk read operation into a series of single read operations. |
| */ |
| for (i = 0 ; ret == 0 && i < val_size ; i++) |
| ret = tps6594_i2c_reg_read_with_crc(client, page, reg + i, val_bytes + i); |
| |
| return ret; |
| } |
| |
| /* Write register: I2C address = I2C base address + Page index */ |
| msgs[0].addr = client->addr + page; |
| msgs[0].flags = 0; |
| msgs[0].len = 1; |
| msgs[0].buf = ® |
| |
| /* Read data */ |
| msgs[1].addr = msgs[0].addr; |
| msgs[1].flags = I2C_M_RD; |
| msgs[1].len = val_size; |
| msgs[1].buf = val_bytes; |
| |
| return tps6594_i2c_transfer(client->adapter, msgs, 2); |
| } |
| |
| static int tps6594_i2c_write(void *context, const void *data, size_t count) |
| { |
| struct i2c_client *client = context; |
| struct tps6594 *tps = i2c_get_clientdata(client); |
| struct i2c_msg msg; |
| const u8 *bytes = data; |
| u8 *buf; |
| const u8 page = bytes[1]; |
| const u8 reg = bytes[0]; |
| int ret = 0; |
| int i; |
| |
| if (tps->use_crc) { |
| /* |
| * Auto-increment feature does not support CRC protocol. |
| * Converts the bulk write operation into a series of single write operations. |
| */ |
| for (i = 0 ; ret == 0 && i < count - 2 ; i++) |
| ret = tps6594_i2c_reg_write_with_crc(client, page, reg + i, bytes[i + 2]); |
| |
| return ret; |
| } |
| |
| /* Setup buffer: page byte is not sent */ |
| buf = kzalloc(--count, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| buf[0] = reg; |
| for (i = 0 ; i < count - 1 ; i++) |
| buf[i + 1] = bytes[i + 2]; |
| |
| /* Write register and data: I2C address = I2C base address + Page index */ |
| msg.addr = client->addr + page; |
| msg.flags = client->flags & I2C_M_TEN; |
| msg.len = count; |
| msg.buf = buf; |
| |
| ret = tps6594_i2c_transfer(client->adapter, &msg, 1); |
| |
| kfree(buf); |
| return ret; |
| } |
| |
| static const struct regmap_config tps6594_i2c_regmap_config = { |
| .reg_bits = 16, |
| .val_bits = 8, |
| .max_register = TPS6594_REG_DWD_FAIL_CNT_REG, |
| .volatile_reg = tps6594_is_volatile_reg, |
| .read = tps6594_i2c_read, |
| .write = tps6594_i2c_write, |
| }; |
| |
| static const struct of_device_id tps6594_i2c_of_match_table[] = { |
| { .compatible = "ti,tps6594-q1", .data = (void *)TPS6594, }, |
| { .compatible = "ti,tps6593-q1", .data = (void *)TPS6593, }, |
| { .compatible = "ti,lp8764-q1", .data = (void *)LP8764, }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, tps6594_i2c_of_match_table); |
| |
| static int tps6594_i2c_probe(struct i2c_client *client) |
| { |
| struct device *dev = &client->dev; |
| struct tps6594 *tps; |
| const struct of_device_id *match; |
| |
| tps = devm_kzalloc(dev, sizeof(*tps), GFP_KERNEL); |
| if (!tps) |
| return -ENOMEM; |
| |
| i2c_set_clientdata(client, tps); |
| |
| tps->dev = dev; |
| tps->reg = client->addr; |
| tps->irq = client->irq; |
| |
| tps->regmap = devm_regmap_init(dev, NULL, client, &tps6594_i2c_regmap_config); |
| if (IS_ERR(tps->regmap)) |
| return dev_err_probe(dev, PTR_ERR(tps->regmap), "Failed to init regmap\n"); |
| |
| match = of_match_device(tps6594_i2c_of_match_table, dev); |
| if (!match) |
| return dev_err_probe(dev, -EINVAL, "Failed to find matching chip ID\n"); |
| tps->chip_id = (unsigned long)match->data; |
| |
| crc8_populate_msb(tps6594_i2c_crc_table, TPS6594_CRC8_POLYNOMIAL); |
| |
| return tps6594_device_init(tps, enable_crc); |
| } |
| |
| static struct i2c_driver tps6594_i2c_driver = { |
| .driver = { |
| .name = "tps6594", |
| .of_match_table = tps6594_i2c_of_match_table, |
| }, |
| .probe = tps6594_i2c_probe, |
| }; |
| module_i2c_driver(tps6594_i2c_driver); |
| |
| MODULE_AUTHOR("Julien Panis <jpanis@baylibre.com>"); |
| MODULE_DESCRIPTION("TPS6594 I2C Interface Driver"); |
| MODULE_LICENSE("GPL"); |