| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH |
| */ |
| |
| /dts-v1/; |
| #include "rk3399-puma.dtsi" |
| |
| / { |
| model = "Theobroma Systems RK3399-Q7 SoM"; |
| compatible = "tsd,rk3399-puma-haikou", "rockchip,rk3399"; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| leds { |
| pinctrl-0 = <&led_pin_module>, <&led_sd_haikou>; |
| |
| sd-card-led { |
| label = "sd_card_led"; |
| gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "mmc0"; |
| }; |
| }; |
| |
| i2s0-sound { |
| compatible = "simple-audio-card"; |
| simple-audio-card,format = "i2s"; |
| simple-audio-card,name = "Haikou,I2S-codec"; |
| simple-audio-card,mclk-fs = <512>; |
| |
| simple-audio-card,codec { |
| clocks = <&sgtl5000_clk>; |
| sound-dai = <&sgtl5000>; |
| }; |
| |
| simple-audio-card,cpu { |
| bitclock-master; |
| frame-master; |
| sound-dai = <&i2s0>; |
| }; |
| }; |
| |
| sgtl5000_clk: sgtl5000-oscillator { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <24576000>; |
| }; |
| |
| dc_12v: dc-12v { |
| compatible = "regulator-fixed"; |
| regulator-name = "dc_12v"; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <12000000>; |
| regulator-max-microvolt = <12000000>; |
| }; |
| |
| vcc3v3_baseboard: vcc3v3-baseboard { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc3v3_baseboard"; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| vin-supply = <&dc_12v>; |
| }; |
| |
| vcc5v0_baseboard: vcc5v0-baseboard { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc5v0_baseboard"; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| vin-supply = <&dc_12v>; |
| }; |
| |
| vcc5v0_otg: vcc5v0-otg-regulator { |
| compatible = "regulator-fixed"; |
| enable-active-high; |
| gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&otg_vbus_drv>; |
| regulator-name = "vcc5v0_otg"; |
| regulator-always-on; |
| }; |
| |
| vdda_codec: vdda-codec { |
| compatible = "regulator-fixed"; |
| regulator-name = "vdda_codec"; |
| regulator-boot-on; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| vin-supply = <&vcc5v0_baseboard>; |
| }; |
| |
| vddd_codec: vddd-codec { |
| compatible = "regulator-fixed"; |
| regulator-name = "vddd_codec"; |
| regulator-boot-on; |
| regulator-min-microvolt = <1600000>; |
| regulator-max-microvolt = <1600000>; |
| vin-supply = <&vcc5v0_baseboard>; |
| }; |
| }; |
| |
| &hdmi { |
| ddc-i2c-bus = <&i2c3>; |
| status = "okay"; |
| }; |
| |
| &i2c1 { |
| status = "okay"; |
| clock-frequency = <400000>; |
| }; |
| |
| &i2c2 { |
| status = "okay"; |
| clock-frequency = <400000>; |
| }; |
| |
| &i2c3 { |
| i2c-scl-rising-time-ns = <450>; |
| i2c-scl-falling-time-ns = <15>; |
| status = "okay"; |
| }; |
| |
| &i2c4 { |
| status = "okay"; |
| clock-frequency = <400000>; |
| |
| sgtl5000: codec@a { |
| compatible = "fsl,sgtl5000"; |
| reg = <0x0a>; |
| clocks = <&sgtl5000_clk>; |
| #sound-dai-cells = <0>; |
| VDDA-supply = <&vdda_codec>; |
| VDDIO-supply = <&vdda_codec>; |
| VDDD-supply = <&vddd_codec>; |
| status = "okay"; |
| }; |
| }; |
| |
| &i2c6 { |
| status = "okay"; |
| clock-frequency = <400000>; |
| }; |
| |
| &pcie_phy { |
| status = "okay"; |
| }; |
| |
| &pcie0 { |
| ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; |
| num-lanes = <4>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pcie_clkreqn_cpm>; |
| status = "okay"; |
| }; |
| |
| &pinctrl { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&haikou_pin_hog>; |
| |
| hog { |
| haikou_pin_hog: haikou-pin-hog { |
| rockchip,pins = |
| /* LID_BTN */ |
| <RK_GPIO0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, |
| /* BATLOW# */ |
| <RK_GPIO0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, |
| /* SLP_BTN# */ |
| <RK_GPIO0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, |
| /* BIOS_DISABLE# */ |
| <RK_GPIO0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; |
| }; |
| }; |
| |
| leds { |
| led_sd_haikou: led-sd-gpio { |
| rockchip,pins = |
| <RK_GPIO1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| }; |
| |
| usb2 { |
| otg_vbus_drv: otg-vbus-drv { |
| rockchip,pins = |
| <RK_GPIO0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| }; |
| }; |
| |
| &pwm0 { |
| status = "okay"; |
| }; |
| |
| &sdmmc { |
| bus-width = <4>; |
| cap-mmc-highspeed; |
| cap-sd-highspeed; |
| cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; |
| disable-wp; |
| max-frequency = <150000000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; |
| vmmc-supply = <&vcc3v3_baseboard>; |
| status = "okay"; |
| }; |
| |
| &spi5 { |
| status = "okay"; |
| }; |
| |
| &tcphy0 { |
| status = "okay"; |
| }; |
| |
| &u2phy0 { |
| status = "okay"; |
| }; |
| |
| &usbdrd3_0 { |
| status = "okay"; |
| }; |
| |
| &usbdrd_dwc3_0 { |
| dr_mode = "otg"; |
| status = "okay"; |
| }; |
| |
| &u2phy0_host { |
| phy-supply = <&vcc5v0_otg>; |
| status = "okay"; |
| }; |
| |
| &uart0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; |
| status = "okay"; |
| }; |
| |
| &uart2 { |
| status = "okay"; |
| }; |
| |
| &usb_host0_ehci { |
| status = "okay"; |
| }; |
| |
| &usb_host0_ohci { |
| status = "okay"; |
| }; |
| |
| &vopb { |
| status = "okay"; |
| }; |
| |
| &vopb_mmu { |
| status = "okay"; |
| }; |
| |
| &vopl { |
| status = "okay"; |
| }; |
| |
| &vopl_mmu { |
| status = "okay"; |
| }; |