| /* |
| * Driver for the Micron P320 SSD |
| * Copyright (C) 2011 Micron Technology, Inc. |
| * |
| * Portions of this code were derived from works subjected to the |
| * following copyright: |
| * Copyright (C) 2009 Integrated Device Technology, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/pci.h> |
| #include <linux/interrupt.h> |
| #include <linux/ata.h> |
| #include <linux/delay.h> |
| #include <linux/hdreg.h> |
| #include <linux/uaccess.h> |
| #include <linux/random.h> |
| #include <linux/smp.h> |
| #include <linux/compat.h> |
| #include <linux/fs.h> |
| #include <linux/module.h> |
| #include <linux/genhd.h> |
| #include <linux/blkdev.h> |
| #include <linux/blk-mq.h> |
| #include <linux/bio.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/idr.h> |
| #include <linux/kthread.h> |
| #include <../drivers/ata/ahci.h> |
| #include <linux/export.h> |
| #include <linux/debugfs.h> |
| #include <linux/prefetch.h> |
| #include <linux/numa.h> |
| #include "mtip32xx.h" |
| |
| #define HW_CMD_SLOT_SZ (MTIP_MAX_COMMAND_SLOTS * 32) |
| |
| /* DMA region containing RX Fis, Identify, RLE10, and SMART buffers */ |
| #define AHCI_RX_FIS_SZ 0x100 |
| #define AHCI_RX_FIS_OFFSET 0x0 |
| #define AHCI_IDFY_SZ ATA_SECT_SIZE |
| #define AHCI_IDFY_OFFSET 0x400 |
| #define AHCI_SECTBUF_SZ ATA_SECT_SIZE |
| #define AHCI_SECTBUF_OFFSET 0x800 |
| #define AHCI_SMARTBUF_SZ ATA_SECT_SIZE |
| #define AHCI_SMARTBUF_OFFSET 0xC00 |
| /* 0x100 + 0x200 + 0x200 + 0x200 is smaller than 4k but we pad it out */ |
| #define BLOCK_DMA_ALLOC_SZ 4096 |
| |
| /* DMA region containing command table (should be 8192 bytes) */ |
| #define AHCI_CMD_SLOT_SZ sizeof(struct mtip_cmd_hdr) |
| #define AHCI_CMD_TBL_SZ (MTIP_MAX_COMMAND_SLOTS * AHCI_CMD_SLOT_SZ) |
| #define AHCI_CMD_TBL_OFFSET 0x0 |
| |
| /* DMA region per command (contains header and SGL) */ |
| #define AHCI_CMD_TBL_HDR_SZ 0x80 |
| #define AHCI_CMD_TBL_HDR_OFFSET 0x0 |
| #define AHCI_CMD_TBL_SGL_SZ (MTIP_MAX_SG * sizeof(struct mtip_cmd_sg)) |
| #define AHCI_CMD_TBL_SGL_OFFSET AHCI_CMD_TBL_HDR_SZ |
| #define CMD_DMA_ALLOC_SZ (AHCI_CMD_TBL_SGL_SZ + AHCI_CMD_TBL_HDR_SZ) |
| |
| |
| #define HOST_CAP_NZDMA (1 << 19) |
| #define HOST_HSORG 0xFC |
| #define HSORG_DISABLE_SLOTGRP_INTR (1<<24) |
| #define HSORG_DISABLE_SLOTGRP_PXIS (1<<16) |
| #define HSORG_HWREV 0xFF00 |
| #define HSORG_STYLE 0x8 |
| #define HSORG_SLOTGROUPS 0x7 |
| |
| #define PORT_COMMAND_ISSUE 0x38 |
| #define PORT_SDBV 0x7C |
| |
| #define PORT_OFFSET 0x100 |
| #define PORT_MEM_SIZE 0x80 |
| |
| #define PORT_IRQ_ERR \ |
| (PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR | PORT_IRQ_CONNECT | \ |
| PORT_IRQ_PHYRDY | PORT_IRQ_UNK_FIS | PORT_IRQ_BAD_PMP | \ |
| PORT_IRQ_TF_ERR | PORT_IRQ_HBUS_DATA_ERR | PORT_IRQ_IF_NONFATAL | \ |
| PORT_IRQ_OVERFLOW) |
| #define PORT_IRQ_LEGACY \ |
| (PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS) |
| #define PORT_IRQ_HANDLED \ |
| (PORT_IRQ_SDB_FIS | PORT_IRQ_LEGACY | \ |
| PORT_IRQ_TF_ERR | PORT_IRQ_IF_ERR | \ |
| PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY) |
| #define DEF_PORT_IRQ \ |
| (PORT_IRQ_ERR | PORT_IRQ_LEGACY | PORT_IRQ_SDB_FIS) |
| |
| /* product numbers */ |
| #define MTIP_PRODUCT_UNKNOWN 0x00 |
| #define MTIP_PRODUCT_ASICFPGA 0x11 |
| |
| /* Device instance number, incremented each time a device is probed. */ |
| static int instance; |
| |
| static struct list_head online_list; |
| static struct list_head removing_list; |
| static spinlock_t dev_lock; |
| |
| /* |
| * Global variable used to hold the major block device number |
| * allocated in mtip_init(). |
| */ |
| static int mtip_major; |
| static struct dentry *dfs_parent; |
| static struct dentry *dfs_device_status; |
| |
| static u32 cpu_use[NR_CPUS]; |
| |
| static DEFINE_IDA(rssd_index_ida); |
| |
| static int mtip_block_initialize(struct driver_data *dd); |
| |
| #ifdef CONFIG_COMPAT |
| struct mtip_compat_ide_task_request_s { |
| __u8 io_ports[8]; |
| __u8 hob_ports[8]; |
| ide_reg_valid_t out_flags; |
| ide_reg_valid_t in_flags; |
| int data_phase; |
| int req_cmd; |
| compat_ulong_t out_size; |
| compat_ulong_t in_size; |
| }; |
| #endif |
| |
| /* |
| * This function check_for_surprise_removal is called |
| * while card is removed from the system and it will |
| * read the vendor id from the configration space |
| * |
| * @pdev Pointer to the pci_dev structure. |
| * |
| * return value |
| * true if device removed, else false |
| */ |
| static bool mtip_check_surprise_removal(struct pci_dev *pdev) |
| { |
| u16 vendor_id = 0; |
| struct driver_data *dd = pci_get_drvdata(pdev); |
| |
| if (dd->sr) |
| return true; |
| |
| /* Read the vendorID from the configuration space */ |
| pci_read_config_word(pdev, 0x00, &vendor_id); |
| if (vendor_id == 0xFFFF) { |
| dd->sr = true; |
| if (dd->queue) |
| blk_queue_flag_set(QUEUE_FLAG_DEAD, dd->queue); |
| else |
| dev_warn(&dd->pdev->dev, |
| "%s: dd->queue is NULL\n", __func__); |
| return true; /* device removed */ |
| } |
| |
| return false; /* device present */ |
| } |
| |
| static struct mtip_cmd *mtip_cmd_from_tag(struct driver_data *dd, |
| unsigned int tag) |
| { |
| struct blk_mq_hw_ctx *hctx = dd->queue->queue_hw_ctx[0]; |
| |
| return blk_mq_rq_to_pdu(blk_mq_tag_to_rq(hctx->tags, tag)); |
| } |
| |
| /* |
| * Reset the HBA (without sleeping) |
| * |
| * @dd Pointer to the driver data structure. |
| * |
| * return value |
| * 0 The reset was successful. |
| * -1 The HBA Reset bit did not clear. |
| */ |
| static int mtip_hba_reset(struct driver_data *dd) |
| { |
| unsigned long timeout; |
| |
| /* Set the reset bit */ |
| writel(HOST_RESET, dd->mmio + HOST_CTL); |
| |
| /* Flush */ |
| readl(dd->mmio + HOST_CTL); |
| |
| /* |
| * Spin for up to 10 seconds waiting for reset acknowledgement. Spec |
| * is 1 sec but in LUN failure conditions, up to 10 secs are required |
| */ |
| timeout = jiffies + msecs_to_jiffies(10000); |
| do { |
| mdelay(10); |
| if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) |
| return -1; |
| |
| } while ((readl(dd->mmio + HOST_CTL) & HOST_RESET) |
| && time_before(jiffies, timeout)); |
| |
| if (readl(dd->mmio + HOST_CTL) & HOST_RESET) |
| return -1; |
| |
| return 0; |
| } |
| |
| /* |
| * Issue a command to the hardware. |
| * |
| * Set the appropriate bit in the s_active and Command Issue hardware |
| * registers, causing hardware command processing to begin. |
| * |
| * @port Pointer to the port structure. |
| * @tag The tag of the command to be issued. |
| * |
| * return value |
| * None |
| */ |
| static inline void mtip_issue_ncq_command(struct mtip_port *port, int tag) |
| { |
| int group = tag >> 5; |
| |
| /* guard SACT and CI registers */ |
| spin_lock(&port->cmd_issue_lock[group]); |
| writel((1 << MTIP_TAG_BIT(tag)), |
| port->s_active[MTIP_TAG_INDEX(tag)]); |
| writel((1 << MTIP_TAG_BIT(tag)), |
| port->cmd_issue[MTIP_TAG_INDEX(tag)]); |
| spin_unlock(&port->cmd_issue_lock[group]); |
| } |
| |
| /* |
| * Enable/disable the reception of FIS |
| * |
| * @port Pointer to the port data structure |
| * @enable 1 to enable, 0 to disable |
| * |
| * return value |
| * Previous state: 1 enabled, 0 disabled |
| */ |
| static int mtip_enable_fis(struct mtip_port *port, int enable) |
| { |
| u32 tmp; |
| |
| /* enable FIS reception */ |
| tmp = readl(port->mmio + PORT_CMD); |
| if (enable) |
| writel(tmp | PORT_CMD_FIS_RX, port->mmio + PORT_CMD); |
| else |
| writel(tmp & ~PORT_CMD_FIS_RX, port->mmio + PORT_CMD); |
| |
| /* Flush */ |
| readl(port->mmio + PORT_CMD); |
| |
| return (((tmp & PORT_CMD_FIS_RX) == PORT_CMD_FIS_RX)); |
| } |
| |
| /* |
| * Enable/disable the DMA engine |
| * |
| * @port Pointer to the port data structure |
| * @enable 1 to enable, 0 to disable |
| * |
| * return value |
| * Previous state: 1 enabled, 0 disabled. |
| */ |
| static int mtip_enable_engine(struct mtip_port *port, int enable) |
| { |
| u32 tmp; |
| |
| /* enable FIS reception */ |
| tmp = readl(port->mmio + PORT_CMD); |
| if (enable) |
| writel(tmp | PORT_CMD_START, port->mmio + PORT_CMD); |
| else |
| writel(tmp & ~PORT_CMD_START, port->mmio + PORT_CMD); |
| |
| readl(port->mmio + PORT_CMD); |
| return (((tmp & PORT_CMD_START) == PORT_CMD_START)); |
| } |
| |
| /* |
| * Enables the port DMA engine and FIS reception. |
| * |
| * return value |
| * None |
| */ |
| static inline void mtip_start_port(struct mtip_port *port) |
| { |
| /* Enable FIS reception */ |
| mtip_enable_fis(port, 1); |
| |
| /* Enable the DMA engine */ |
| mtip_enable_engine(port, 1); |
| } |
| |
| /* |
| * Deinitialize a port by disabling port interrupts, the DMA engine, |
| * and FIS reception. |
| * |
| * @port Pointer to the port structure |
| * |
| * return value |
| * None |
| */ |
| static inline void mtip_deinit_port(struct mtip_port *port) |
| { |
| /* Disable interrupts on this port */ |
| writel(0, port->mmio + PORT_IRQ_MASK); |
| |
| /* Disable the DMA engine */ |
| mtip_enable_engine(port, 0); |
| |
| /* Disable FIS reception */ |
| mtip_enable_fis(port, 0); |
| } |
| |
| /* |
| * Initialize a port. |
| * |
| * This function deinitializes the port by calling mtip_deinit_port() and |
| * then initializes it by setting the command header and RX FIS addresses, |
| * clearing the SError register and any pending port interrupts before |
| * re-enabling the default set of port interrupts. |
| * |
| * @port Pointer to the port structure. |
| * |
| * return value |
| * None |
| */ |
| static void mtip_init_port(struct mtip_port *port) |
| { |
| int i; |
| mtip_deinit_port(port); |
| |
| /* Program the command list base and FIS base addresses */ |
| if (readl(port->dd->mmio + HOST_CAP) & HOST_CAP_64) { |
| writel((port->command_list_dma >> 16) >> 16, |
| port->mmio + PORT_LST_ADDR_HI); |
| writel((port->rxfis_dma >> 16) >> 16, |
| port->mmio + PORT_FIS_ADDR_HI); |
| set_bit(MTIP_PF_HOST_CAP_64, &port->flags); |
| } |
| |
| writel(port->command_list_dma & 0xFFFFFFFF, |
| port->mmio + PORT_LST_ADDR); |
| writel(port->rxfis_dma & 0xFFFFFFFF, port->mmio + PORT_FIS_ADDR); |
| |
| /* Clear SError */ |
| writel(readl(port->mmio + PORT_SCR_ERR), port->mmio + PORT_SCR_ERR); |
| |
| /* reset the completed registers.*/ |
| for (i = 0; i < port->dd->slot_groups; i++) |
| writel(0xFFFFFFFF, port->completed[i]); |
| |
| /* Clear any pending interrupts for this port */ |
| writel(readl(port->mmio + PORT_IRQ_STAT), port->mmio + PORT_IRQ_STAT); |
| |
| /* Clear any pending interrupts on the HBA. */ |
| writel(readl(port->dd->mmio + HOST_IRQ_STAT), |
| port->dd->mmio + HOST_IRQ_STAT); |
| |
| /* Enable port interrupts */ |
| writel(DEF_PORT_IRQ, port->mmio + PORT_IRQ_MASK); |
| } |
| |
| /* |
| * Restart a port |
| * |
| * @port Pointer to the port data structure. |
| * |
| * return value |
| * None |
| */ |
| static void mtip_restart_port(struct mtip_port *port) |
| { |
| unsigned long timeout; |
| |
| /* Disable the DMA engine */ |
| mtip_enable_engine(port, 0); |
| |
| /* Chip quirk: wait up to 500ms for PxCMD.CR == 0 */ |
| timeout = jiffies + msecs_to_jiffies(500); |
| while ((readl(port->mmio + PORT_CMD) & PORT_CMD_LIST_ON) |
| && time_before(jiffies, timeout)) |
| ; |
| |
| if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag)) |
| return; |
| |
| /* |
| * Chip quirk: escalate to hba reset if |
| * PxCMD.CR not clear after 500 ms |
| */ |
| if (readl(port->mmio + PORT_CMD) & PORT_CMD_LIST_ON) { |
| dev_warn(&port->dd->pdev->dev, |
| "PxCMD.CR not clear, escalating reset\n"); |
| |
| if (mtip_hba_reset(port->dd)) |
| dev_err(&port->dd->pdev->dev, |
| "HBA reset escalation failed.\n"); |
| |
| /* 30 ms delay before com reset to quiesce chip */ |
| mdelay(30); |
| } |
| |
| dev_warn(&port->dd->pdev->dev, "Issuing COM reset\n"); |
| |
| /* Set PxSCTL.DET */ |
| writel(readl(port->mmio + PORT_SCR_CTL) | |
| 1, port->mmio + PORT_SCR_CTL); |
| readl(port->mmio + PORT_SCR_CTL); |
| |
| /* Wait 1 ms to quiesce chip function */ |
| timeout = jiffies + msecs_to_jiffies(1); |
| while (time_before(jiffies, timeout)) |
| ; |
| |
| if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag)) |
| return; |
| |
| /* Clear PxSCTL.DET */ |
| writel(readl(port->mmio + PORT_SCR_CTL) & ~1, |
| port->mmio + PORT_SCR_CTL); |
| readl(port->mmio + PORT_SCR_CTL); |
| |
| /* Wait 500 ms for bit 0 of PORT_SCR_STS to be set */ |
| timeout = jiffies + msecs_to_jiffies(500); |
| while (((readl(port->mmio + PORT_SCR_STAT) & 0x01) == 0) |
| && time_before(jiffies, timeout)) |
| ; |
| |
| if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag)) |
| return; |
| |
| if ((readl(port->mmio + PORT_SCR_STAT) & 0x01) == 0) |
| dev_warn(&port->dd->pdev->dev, |
| "COM reset failed\n"); |
| |
| mtip_init_port(port); |
| mtip_start_port(port); |
| |
| } |
| |
| static int mtip_device_reset(struct driver_data *dd) |
| { |
| int rv = 0; |
| |
| if (mtip_check_surprise_removal(dd->pdev)) |
| return 0; |
| |
| if (mtip_hba_reset(dd) < 0) |
| rv = -EFAULT; |
| |
| mdelay(1); |
| mtip_init_port(dd->port); |
| mtip_start_port(dd->port); |
| |
| /* Enable interrupts on the HBA. */ |
| writel(readl(dd->mmio + HOST_CTL) | HOST_IRQ_EN, |
| dd->mmio + HOST_CTL); |
| return rv; |
| } |
| |
| /* |
| * Helper function for tag logging |
| */ |
| static void print_tags(struct driver_data *dd, |
| char *msg, |
| unsigned long *tagbits, |
| int cnt) |
| { |
| unsigned char tagmap[128]; |
| int group, tagmap_len = 0; |
| |
| memset(tagmap, 0, sizeof(tagmap)); |
| for (group = SLOTBITS_IN_LONGS; group > 0; group--) |
| tagmap_len += sprintf(tagmap + tagmap_len, "%016lX ", |
| tagbits[group-1]); |
| dev_warn(&dd->pdev->dev, |
| "%d command(s) %s: tagmap [%s]", cnt, msg, tagmap); |
| } |
| |
| static int mtip_read_log_page(struct mtip_port *port, u8 page, u16 *buffer, |
| dma_addr_t buffer_dma, unsigned int sectors); |
| static int mtip_get_smart_attr(struct mtip_port *port, unsigned int id, |
| struct smart_attr *attrib); |
| |
| static void mtip_complete_command(struct mtip_cmd *cmd, blk_status_t status) |
| { |
| struct request *req = blk_mq_rq_from_pdu(cmd); |
| |
| cmd->status = status; |
| blk_mq_complete_request(req); |
| } |
| |
| /* |
| * Handle an error. |
| * |
| * @dd Pointer to the DRIVER_DATA structure. |
| * |
| * return value |
| * None |
| */ |
| static void mtip_handle_tfe(struct driver_data *dd) |
| { |
| int group, tag, bit, reissue, rv; |
| struct mtip_port *port; |
| struct mtip_cmd *cmd; |
| u32 completed; |
| struct host_to_dev_fis *fis; |
| unsigned long tagaccum[SLOTBITS_IN_LONGS]; |
| unsigned int cmd_cnt = 0; |
| unsigned char *buf; |
| char *fail_reason = NULL; |
| int fail_all_ncq_write = 0, fail_all_ncq_cmds = 0; |
| |
| dev_warn(&dd->pdev->dev, "Taskfile error\n"); |
| |
| port = dd->port; |
| |
| if (test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags)) { |
| cmd = mtip_cmd_from_tag(dd, MTIP_TAG_INTERNAL); |
| dbg_printk(MTIP_DRV_NAME " TFE for the internal command\n"); |
| mtip_complete_command(cmd, BLK_STS_IOERR); |
| return; |
| } |
| |
| /* clear the tag accumulator */ |
| memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long)); |
| |
| /* Loop through all the groups */ |
| for (group = 0; group < dd->slot_groups; group++) { |
| completed = readl(port->completed[group]); |
| |
| dev_warn(&dd->pdev->dev, "g=%u, comp=%x\n", group, completed); |
| |
| /* clear completed status register in the hardware.*/ |
| writel(completed, port->completed[group]); |
| |
| /* Process successfully completed commands */ |
| for (bit = 0; bit < 32 && completed; bit++) { |
| if (!(completed & (1<<bit))) |
| continue; |
| tag = (group << 5) + bit; |
| |
| /* Skip the internal command slot */ |
| if (tag == MTIP_TAG_INTERNAL) |
| continue; |
| |
| cmd = mtip_cmd_from_tag(dd, tag); |
| mtip_complete_command(cmd, 0); |
| set_bit(tag, tagaccum); |
| cmd_cnt++; |
| } |
| } |
| |
| print_tags(dd, "completed (TFE)", tagaccum, cmd_cnt); |
| |
| /* Restart the port */ |
| mdelay(20); |
| mtip_restart_port(port); |
| |
| /* Trying to determine the cause of the error */ |
| rv = mtip_read_log_page(dd->port, ATA_LOG_SATA_NCQ, |
| dd->port->log_buf, |
| dd->port->log_buf_dma, 1); |
| if (rv) { |
| dev_warn(&dd->pdev->dev, |
| "Error in READ LOG EXT (10h) command\n"); |
| /* non-critical error, don't fail the load */ |
| } else { |
| buf = (unsigned char *)dd->port->log_buf; |
| if (buf[259] & 0x1) { |
| dev_info(&dd->pdev->dev, |
| "Write protect bit is set.\n"); |
| set_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag); |
| fail_all_ncq_write = 1; |
| fail_reason = "write protect"; |
| } |
| if (buf[288] == 0xF7) { |
| dev_info(&dd->pdev->dev, |
| "Exceeded Tmax, drive in thermal shutdown.\n"); |
| set_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag); |
| fail_all_ncq_cmds = 1; |
| fail_reason = "thermal shutdown"; |
| } |
| if (buf[288] == 0xBF) { |
| set_bit(MTIP_DDF_REBUILD_FAILED_BIT, &dd->dd_flag); |
| dev_info(&dd->pdev->dev, |
| "Drive indicates rebuild has failed. Secure erase required.\n"); |
| fail_all_ncq_cmds = 1; |
| fail_reason = "rebuild failed"; |
| } |
| } |
| |
| /* clear the tag accumulator */ |
| memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long)); |
| |
| /* Loop through all the groups */ |
| for (group = 0; group < dd->slot_groups; group++) { |
| for (bit = 0; bit < 32; bit++) { |
| reissue = 1; |
| tag = (group << 5) + bit; |
| cmd = mtip_cmd_from_tag(dd, tag); |
| |
| fis = (struct host_to_dev_fis *)cmd->command; |
| |
| /* Should re-issue? */ |
| if (tag == MTIP_TAG_INTERNAL || |
| fis->command == ATA_CMD_SET_FEATURES) |
| reissue = 0; |
| else { |
| if (fail_all_ncq_cmds || |
| (fail_all_ncq_write && |
| fis->command == ATA_CMD_FPDMA_WRITE)) { |
| dev_warn(&dd->pdev->dev, |
| " Fail: %s w/tag %d [%s].\n", |
| fis->command == ATA_CMD_FPDMA_WRITE ? |
| "write" : "read", |
| tag, |
| fail_reason != NULL ? |
| fail_reason : "unknown"); |
| mtip_complete_command(cmd, BLK_STS_MEDIUM); |
| continue; |
| } |
| } |
| |
| /* |
| * First check if this command has |
| * exceeded its retries. |
| */ |
| if (reissue && (cmd->retries-- > 0)) { |
| |
| set_bit(tag, tagaccum); |
| |
| /* Re-issue the command. */ |
| mtip_issue_ncq_command(port, tag); |
| |
| continue; |
| } |
| |
| /* Retire a command that will not be reissued */ |
| dev_warn(&port->dd->pdev->dev, |
| "retiring tag %d\n", tag); |
| |
| mtip_complete_command(cmd, BLK_STS_IOERR); |
| } |
| } |
| print_tags(dd, "reissued (TFE)", tagaccum, cmd_cnt); |
| } |
| |
| /* |
| * Handle a set device bits interrupt |
| */ |
| static inline void mtip_workq_sdbfx(struct mtip_port *port, int group, |
| u32 completed) |
| { |
| struct driver_data *dd = port->dd; |
| int tag, bit; |
| struct mtip_cmd *command; |
| |
| if (!completed) { |
| WARN_ON_ONCE(!completed); |
| return; |
| } |
| /* clear completed status register in the hardware.*/ |
| writel(completed, port->completed[group]); |
| |
| /* Process completed commands. */ |
| for (bit = 0; (bit < 32) && completed; bit++) { |
| if (completed & 0x01) { |
| tag = (group << 5) | bit; |
| |
| /* skip internal command slot. */ |
| if (unlikely(tag == MTIP_TAG_INTERNAL)) |
| continue; |
| |
| command = mtip_cmd_from_tag(dd, tag); |
| mtip_complete_command(command, 0); |
| } |
| completed >>= 1; |
| } |
| |
| /* If last, re-enable interrupts */ |
| if (atomic_dec_return(&dd->irq_workers_active) == 0) |
| writel(0xffffffff, dd->mmio + HOST_IRQ_STAT); |
| } |
| |
| /* |
| * Process legacy pio and d2h interrupts |
| */ |
| static inline void mtip_process_legacy(struct driver_data *dd, u32 port_stat) |
| { |
| struct mtip_port *port = dd->port; |
| struct mtip_cmd *cmd = mtip_cmd_from_tag(dd, MTIP_TAG_INTERNAL); |
| |
| if (test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags) && cmd) { |
| int group = MTIP_TAG_INDEX(MTIP_TAG_INTERNAL); |
| int status = readl(port->cmd_issue[group]); |
| |
| if (!(status & (1 << MTIP_TAG_BIT(MTIP_TAG_INTERNAL)))) |
| mtip_complete_command(cmd, 0); |
| } |
| } |
| |
| /* |
| * Demux and handle errors |
| */ |
| static inline void mtip_process_errors(struct driver_data *dd, u32 port_stat) |
| { |
| if (unlikely(port_stat & PORT_IRQ_CONNECT)) { |
| dev_warn(&dd->pdev->dev, |
| "Clearing PxSERR.DIAG.x\n"); |
| writel((1 << 26), dd->port->mmio + PORT_SCR_ERR); |
| } |
| |
| if (unlikely(port_stat & PORT_IRQ_PHYRDY)) { |
| dev_warn(&dd->pdev->dev, |
| "Clearing PxSERR.DIAG.n\n"); |
| writel((1 << 16), dd->port->mmio + PORT_SCR_ERR); |
| } |
| |
| if (unlikely(port_stat & ~PORT_IRQ_HANDLED)) { |
| dev_warn(&dd->pdev->dev, |
| "Port stat errors %x unhandled\n", |
| (port_stat & ~PORT_IRQ_HANDLED)); |
| if (mtip_check_surprise_removal(dd->pdev)) |
| return; |
| } |
| if (likely(port_stat & (PORT_IRQ_TF_ERR | PORT_IRQ_IF_ERR))) { |
| set_bit(MTIP_PF_EH_ACTIVE_BIT, &dd->port->flags); |
| wake_up_interruptible(&dd->port->svc_wait); |
| } |
| } |
| |
| static inline irqreturn_t mtip_handle_irq(struct driver_data *data) |
| { |
| struct driver_data *dd = (struct driver_data *) data; |
| struct mtip_port *port = dd->port; |
| u32 hba_stat, port_stat; |
| int rv = IRQ_NONE; |
| int do_irq_enable = 1, i, workers; |
| struct mtip_work *twork; |
| |
| hba_stat = readl(dd->mmio + HOST_IRQ_STAT); |
| if (hba_stat) { |
| rv = IRQ_HANDLED; |
| |
| /* Acknowledge the interrupt status on the port.*/ |
| port_stat = readl(port->mmio + PORT_IRQ_STAT); |
| if (unlikely(port_stat == 0xFFFFFFFF)) { |
| mtip_check_surprise_removal(dd->pdev); |
| return IRQ_HANDLED; |
| } |
| writel(port_stat, port->mmio + PORT_IRQ_STAT); |
| |
| /* Demux port status */ |
| if (likely(port_stat & PORT_IRQ_SDB_FIS)) { |
| do_irq_enable = 0; |
| WARN_ON_ONCE(atomic_read(&dd->irq_workers_active) != 0); |
| |
| /* Start at 1: group zero is always local? */ |
| for (i = 0, workers = 0; i < MTIP_MAX_SLOT_GROUPS; |
| i++) { |
| twork = &dd->work[i]; |
| twork->completed = readl(port->completed[i]); |
| if (twork->completed) |
| workers++; |
| } |
| |
| atomic_set(&dd->irq_workers_active, workers); |
| if (workers) { |
| for (i = 1; i < MTIP_MAX_SLOT_GROUPS; i++) { |
| twork = &dd->work[i]; |
| if (twork->completed) |
| queue_work_on( |
| twork->cpu_binding, |
| dd->isr_workq, |
| &twork->work); |
| } |
| |
| if (likely(dd->work[0].completed)) |
| mtip_workq_sdbfx(port, 0, |
| dd->work[0].completed); |
| |
| } else { |
| /* |
| * Chip quirk: SDB interrupt but nothing |
| * to complete |
| */ |
| do_irq_enable = 1; |
| } |
| } |
| |
| if (unlikely(port_stat & PORT_IRQ_ERR)) { |
| if (unlikely(mtip_check_surprise_removal(dd->pdev))) { |
| /* don't proceed further */ |
| return IRQ_HANDLED; |
| } |
| if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, |
| &dd->dd_flag)) |
| return rv; |
| |
| mtip_process_errors(dd, port_stat & PORT_IRQ_ERR); |
| } |
| |
| if (unlikely(port_stat & PORT_IRQ_LEGACY)) |
| mtip_process_legacy(dd, port_stat & PORT_IRQ_LEGACY); |
| } |
| |
| /* acknowledge interrupt */ |
| if (unlikely(do_irq_enable)) |
| writel(hba_stat, dd->mmio + HOST_IRQ_STAT); |
| |
| return rv; |
| } |
| |
| /* |
| * HBA interrupt subroutine. |
| * |
| * @irq IRQ number. |
| * @instance Pointer to the driver data structure. |
| * |
| * return value |
| * IRQ_HANDLED A HBA interrupt was pending and handled. |
| * IRQ_NONE This interrupt was not for the HBA. |
| */ |
| static irqreturn_t mtip_irq_handler(int irq, void *instance) |
| { |
| struct driver_data *dd = instance; |
| |
| return mtip_handle_irq(dd); |
| } |
| |
| static void mtip_issue_non_ncq_command(struct mtip_port *port, int tag) |
| { |
| writel(1 << MTIP_TAG_BIT(tag), port->cmd_issue[MTIP_TAG_INDEX(tag)]); |
| } |
| |
| static bool mtip_pause_ncq(struct mtip_port *port, |
| struct host_to_dev_fis *fis) |
| { |
| unsigned long task_file_data; |
| |
| task_file_data = readl(port->mmio+PORT_TFDATA); |
| if ((task_file_data & 1)) |
| return false; |
| |
| if (fis->command == ATA_CMD_SEC_ERASE_PREP) { |
| port->ic_pause_timer = jiffies; |
| return true; |
| } else if ((fis->command == ATA_CMD_DOWNLOAD_MICRO) && |
| (fis->features == 0x03)) { |
| set_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags); |
| port->ic_pause_timer = jiffies; |
| return true; |
| } else if ((fis->command == ATA_CMD_SEC_ERASE_UNIT) || |
| ((fis->command == 0xFC) && |
| (fis->features == 0x27 || fis->features == 0x72 || |
| fis->features == 0x62 || fis->features == 0x26))) { |
| clear_bit(MTIP_DDF_SEC_LOCK_BIT, &port->dd->dd_flag); |
| clear_bit(MTIP_DDF_REBUILD_FAILED_BIT, &port->dd->dd_flag); |
| /* Com reset after secure erase or lowlevel format */ |
| mtip_restart_port(port); |
| clear_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags); |
| return false; |
| } |
| |
| return false; |
| } |
| |
| static bool mtip_commands_active(struct mtip_port *port) |
| { |
| unsigned int active; |
| unsigned int n; |
| |
| /* |
| * Ignore s_active bit 0 of array element 0. |
| * This bit will always be set |
| */ |
| active = readl(port->s_active[0]) & 0xFFFFFFFE; |
| for (n = 1; n < port->dd->slot_groups; n++) |
| active |= readl(port->s_active[n]); |
| |
| return active != 0; |
| } |
| |
| /* |
| * Wait for port to quiesce |
| * |
| * @port Pointer to port data structure |
| * @timeout Max duration to wait (ms) |
| * |
| * return value |
| * 0 Success |
| * -EBUSY Commands still active |
| */ |
| static int mtip_quiesce_io(struct mtip_port *port, unsigned long timeout) |
| { |
| unsigned long to; |
| bool active = true; |
| |
| blk_mq_quiesce_queue(port->dd->queue); |
| |
| to = jiffies + msecs_to_jiffies(timeout); |
| do { |
| if (test_bit(MTIP_PF_SVC_THD_ACTIVE_BIT, &port->flags) && |
| test_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags)) { |
| msleep(20); |
| continue; /* svc thd is actively issuing commands */ |
| } |
| |
| msleep(100); |
| |
| if (mtip_check_surprise_removal(port->dd->pdev)) |
| goto err_fault; |
| |
| active = mtip_commands_active(port); |
| if (!active) |
| break; |
| } while (time_before(jiffies, to)); |
| |
| blk_mq_unquiesce_queue(port->dd->queue); |
| return active ? -EBUSY : 0; |
| err_fault: |
| blk_mq_unquiesce_queue(port->dd->queue); |
| return -EFAULT; |
| } |
| |
| struct mtip_int_cmd { |
| int fis_len; |
| dma_addr_t buffer; |
| int buf_len; |
| u32 opts; |
| }; |
| |
| /* |
| * Execute an internal command and wait for the completion. |
| * |
| * @port Pointer to the port data structure. |
| * @fis Pointer to the FIS that describes the command. |
| * @fis_len Length in WORDS of the FIS. |
| * @buffer DMA accessible for command data. |
| * @buf_len Length, in bytes, of the data buffer. |
| * @opts Command header options, excluding the FIS length |
| * and the number of PRD entries. |
| * @timeout Time in ms to wait for the command to complete. |
| * |
| * return value |
| * 0 Command completed successfully. |
| * -EFAULT The buffer address is not correctly aligned. |
| * -EBUSY Internal command or other IO in progress. |
| * -EAGAIN Time out waiting for command to complete. |
| */ |
| static int mtip_exec_internal_command(struct mtip_port *port, |
| struct host_to_dev_fis *fis, |
| int fis_len, |
| dma_addr_t buffer, |
| int buf_len, |
| u32 opts, |
| unsigned long timeout) |
| { |
| struct mtip_cmd *int_cmd; |
| struct driver_data *dd = port->dd; |
| struct request *rq; |
| struct mtip_int_cmd icmd = { |
| .fis_len = fis_len, |
| .buffer = buffer, |
| .buf_len = buf_len, |
| .opts = opts |
| }; |
| int rv = 0; |
| |
| /* Make sure the buffer is 8 byte aligned. This is asic specific. */ |
| if (buffer & 0x00000007) { |
| dev_err(&dd->pdev->dev, "SG buffer is not 8 byte aligned\n"); |
| return -EFAULT; |
| } |
| |
| if (mtip_check_surprise_removal(dd->pdev)) |
| return -EFAULT; |
| |
| rq = blk_mq_alloc_request(dd->queue, REQ_OP_DRV_IN, BLK_MQ_REQ_RESERVED); |
| if (IS_ERR(rq)) { |
| dbg_printk(MTIP_DRV_NAME "Unable to allocate tag for PIO cmd\n"); |
| return -EFAULT; |
| } |
| |
| set_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags); |
| |
| if (fis->command == ATA_CMD_SEC_ERASE_PREP) |
| set_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags); |
| |
| clear_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags); |
| |
| if (fis->command != ATA_CMD_STANDBYNOW1) { |
| /* wait for io to complete if non atomic */ |
| if (mtip_quiesce_io(port, MTIP_QUIESCE_IO_TIMEOUT_MS) < 0) { |
| dev_warn(&dd->pdev->dev, "Failed to quiesce IO\n"); |
| blk_mq_free_request(rq); |
| clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags); |
| wake_up_interruptible(&port->svc_wait); |
| return -EBUSY; |
| } |
| } |
| |
| /* Copy the command to the command table */ |
| int_cmd = blk_mq_rq_to_pdu(rq); |
| int_cmd->icmd = &icmd; |
| memcpy(int_cmd->command, fis, fis_len*4); |
| |
| rq->timeout = timeout; |
| |
| /* insert request and run queue */ |
| blk_execute_rq(rq->q, NULL, rq, true); |
| |
| if (int_cmd->status) { |
| dev_err(&dd->pdev->dev, "Internal command [%02X] failed %d\n", |
| fis->command, int_cmd->status); |
| rv = -EIO; |
| |
| if (mtip_check_surprise_removal(dd->pdev) || |
| test_bit(MTIP_DDF_REMOVE_PENDING_BIT, |
| &dd->dd_flag)) { |
| dev_err(&dd->pdev->dev, |
| "Internal command [%02X] wait returned due to SR\n", |
| fis->command); |
| rv = -ENXIO; |
| goto exec_ic_exit; |
| } |
| mtip_device_reset(dd); /* recover from timeout issue */ |
| rv = -EAGAIN; |
| goto exec_ic_exit; |
| } |
| |
| if (readl(port->cmd_issue[MTIP_TAG_INDEX(MTIP_TAG_INTERNAL)]) |
| & (1 << MTIP_TAG_BIT(MTIP_TAG_INTERNAL))) { |
| rv = -ENXIO; |
| if (!test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) { |
| mtip_device_reset(dd); |
| rv = -EAGAIN; |
| } |
| } |
| exec_ic_exit: |
| /* Clear the allocated and active bits for the internal command. */ |
| blk_mq_free_request(rq); |
| clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags); |
| if (rv >= 0 && mtip_pause_ncq(port, fis)) { |
| /* NCQ paused */ |
| return rv; |
| } |
| wake_up_interruptible(&port->svc_wait); |
| |
| return rv; |
| } |
| |
| /* |
| * Byte-swap ATA ID strings. |
| * |
| * ATA identify data contains strings in byte-swapped 16-bit words. |
| * They must be swapped (on all architectures) to be usable as C strings. |
| * This function swaps bytes in-place. |
| * |
| * @buf The buffer location of the string |
| * @len The number of bytes to swap |
| * |
| * return value |
| * None |
| */ |
| static inline void ata_swap_string(u16 *buf, unsigned int len) |
| { |
| int i; |
| for (i = 0; i < (len/2); i++) |
| be16_to_cpus(&buf[i]); |
| } |
| |
| static void mtip_set_timeout(struct driver_data *dd, |
| struct host_to_dev_fis *fis, |
| unsigned int *timeout, u8 erasemode) |
| { |
| switch (fis->command) { |
| case ATA_CMD_DOWNLOAD_MICRO: |
| *timeout = 120000; /* 2 minutes */ |
| break; |
| case ATA_CMD_SEC_ERASE_UNIT: |
| case 0xFC: |
| if (erasemode) |
| *timeout = ((*(dd->port->identify + 90) * 2) * 60000); |
| else |
| *timeout = ((*(dd->port->identify + 89) * 2) * 60000); |
| break; |
| case ATA_CMD_STANDBYNOW1: |
| *timeout = 120000; /* 2 minutes */ |
| break; |
| case 0xF7: |
| case 0xFA: |
| *timeout = 60000; /* 60 seconds */ |
| break; |
| case ATA_CMD_SMART: |
| *timeout = 15000; /* 15 seconds */ |
| break; |
| default: |
| *timeout = MTIP_IOCTL_CMD_TIMEOUT_MS; |
| break; |
| } |
| } |
| |
| /* |
| * Request the device identity information. |
| * |
| * If a user space buffer is not specified, i.e. is NULL, the |
| * identify information is still read from the drive and placed |
| * into the identify data buffer (@e port->identify) in the |
| * port data structure. |
| * When the identify buffer contains valid identify information @e |
| * port->identify_valid is non-zero. |
| * |
| * @port Pointer to the port structure. |
| * @user_buffer A user space buffer where the identify data should be |
| * copied. |
| * |
| * return value |
| * 0 Command completed successfully. |
| * -EFAULT An error occurred while coping data to the user buffer. |
| * -1 Command failed. |
| */ |
| static int mtip_get_identify(struct mtip_port *port, void __user *user_buffer) |
| { |
| int rv = 0; |
| struct host_to_dev_fis fis; |
| |
| if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag)) |
| return -EFAULT; |
| |
| /* Build the FIS. */ |
| memset(&fis, 0, sizeof(struct host_to_dev_fis)); |
| fis.type = 0x27; |
| fis.opts = 1 << 7; |
| fis.command = ATA_CMD_ID_ATA; |
| |
| /* Set the identify information as invalid. */ |
| port->identify_valid = 0; |
| |
| /* Clear the identify information. */ |
| memset(port->identify, 0, sizeof(u16) * ATA_ID_WORDS); |
| |
| /* Execute the command. */ |
| if (mtip_exec_internal_command(port, |
| &fis, |
| 5, |
| port->identify_dma, |
| sizeof(u16) * ATA_ID_WORDS, |
| 0, |
| MTIP_INT_CMD_TIMEOUT_MS) |
| < 0) { |
| rv = -1; |
| goto out; |
| } |
| |
| /* |
| * Perform any necessary byte-swapping. Yes, the kernel does in fact |
| * perform field-sensitive swapping on the string fields. |
| * See the kernel use of ata_id_string() for proof of this. |
| */ |
| #ifdef __LITTLE_ENDIAN |
| ata_swap_string(port->identify + 27, 40); /* model string*/ |
| ata_swap_string(port->identify + 23, 8); /* firmware string*/ |
| ata_swap_string(port->identify + 10, 20); /* serial# string*/ |
| #else |
| { |
| int i; |
| for (i = 0; i < ATA_ID_WORDS; i++) |
| port->identify[i] = le16_to_cpu(port->identify[i]); |
| } |
| #endif |
| |
| /* Check security locked state */ |
| if (port->identify[128] & 0x4) |
| set_bit(MTIP_DDF_SEC_LOCK_BIT, &port->dd->dd_flag); |
| else |
| clear_bit(MTIP_DDF_SEC_LOCK_BIT, &port->dd->dd_flag); |
| |
| #ifdef MTIP_TRIM /* Disabling TRIM support temporarily */ |
| /* Demux ID.DRAT & ID.RZAT to determine trim support */ |
| if (port->identify[69] & (1 << 14) && port->identify[69] & (1 << 5)) |
| port->dd->trim_supp = true; |
| else |
| #endif |
| port->dd->trim_supp = false; |
| |
| /* Set the identify buffer as valid. */ |
| port->identify_valid = 1; |
| |
| if (user_buffer) { |
| if (copy_to_user( |
| user_buffer, |
| port->identify, |
| ATA_ID_WORDS * sizeof(u16))) { |
| rv = -EFAULT; |
| goto out; |
| } |
| } |
| |
| out: |
| return rv; |
| } |
| |
| /* |
| * Issue a standby immediate command to the device. |
| * |
| * @port Pointer to the port structure. |
| * |
| * return value |
| * 0 Command was executed successfully. |
| * -1 An error occurred while executing the command. |
| */ |
| static int mtip_standby_immediate(struct mtip_port *port) |
| { |
| int rv; |
| struct host_to_dev_fis fis; |
| unsigned long start; |
| unsigned int timeout; |
| |
| /* Build the FIS. */ |
| memset(&fis, 0, sizeof(struct host_to_dev_fis)); |
| fis.type = 0x27; |
| fis.opts = 1 << 7; |
| fis.command = ATA_CMD_STANDBYNOW1; |
| |
| mtip_set_timeout(port->dd, &fis, &timeout, 0); |
| |
| start = jiffies; |
| rv = mtip_exec_internal_command(port, |
| &fis, |
| 5, |
| 0, |
| 0, |
| 0, |
| timeout); |
| dbg_printk(MTIP_DRV_NAME "Time taken to complete standby cmd: %d ms\n", |
| jiffies_to_msecs(jiffies - start)); |
| if (rv) |
| dev_warn(&port->dd->pdev->dev, |
| "STANDBY IMMEDIATE command failed.\n"); |
| |
| return rv; |
| } |
| |
| /* |
| * Issue a READ LOG EXT command to the device. |
| * |
| * @port pointer to the port structure. |
| * @page page number to fetch |
| * @buffer pointer to buffer |
| * @buffer_dma dma address corresponding to @buffer |
| * @sectors page length to fetch, in sectors |
| * |
| * return value |
| * @rv return value from mtip_exec_internal_command() |
| */ |
| static int mtip_read_log_page(struct mtip_port *port, u8 page, u16 *buffer, |
| dma_addr_t buffer_dma, unsigned int sectors) |
| { |
| struct host_to_dev_fis fis; |
| |
| memset(&fis, 0, sizeof(struct host_to_dev_fis)); |
| fis.type = 0x27; |
| fis.opts = 1 << 7; |
| fis.command = ATA_CMD_READ_LOG_EXT; |
| fis.sect_count = sectors & 0xFF; |
| fis.sect_cnt_ex = (sectors >> 8) & 0xFF; |
| fis.lba_low = page; |
| fis.lba_mid = 0; |
| fis.device = ATA_DEVICE_OBS; |
| |
| memset(buffer, 0, sectors * ATA_SECT_SIZE); |
| |
| return mtip_exec_internal_command(port, |
| &fis, |
| 5, |
| buffer_dma, |
| sectors * ATA_SECT_SIZE, |
| 0, |
| MTIP_INT_CMD_TIMEOUT_MS); |
| } |
| |
| /* |
| * Issue a SMART READ DATA command to the device. |
| * |
| * @port pointer to the port structure. |
| * @buffer pointer to buffer |
| * @buffer_dma dma address corresponding to @buffer |
| * |
| * return value |
| * @rv return value from mtip_exec_internal_command() |
| */ |
| static int mtip_get_smart_data(struct mtip_port *port, u8 *buffer, |
| dma_addr_t buffer_dma) |
| { |
| struct host_to_dev_fis fis; |
| |
| memset(&fis, 0, sizeof(struct host_to_dev_fis)); |
| fis.type = 0x27; |
| fis.opts = 1 << 7; |
| fis.command = ATA_CMD_SMART; |
| fis.features = 0xD0; |
| fis.sect_count = 1; |
| fis.lba_mid = 0x4F; |
| fis.lba_hi = 0xC2; |
| fis.device = ATA_DEVICE_OBS; |
| |
| return mtip_exec_internal_command(port, |
| &fis, |
| 5, |
| buffer_dma, |
| ATA_SECT_SIZE, |
| 0, |
| 15000); |
| } |
| |
| /* |
| * Get the value of a smart attribute |
| * |
| * @port pointer to the port structure |
| * @id attribute number |
| * @attrib pointer to return attrib information corresponding to @id |
| * |
| * return value |
| * -EINVAL NULL buffer passed or unsupported attribute @id. |
| * -EPERM Identify data not valid, SMART not supported or not enabled |
| */ |
| static int mtip_get_smart_attr(struct mtip_port *port, unsigned int id, |
| struct smart_attr *attrib) |
| { |
| int rv, i; |
| struct smart_attr *pattr; |
| |
| if (!attrib) |
| return -EINVAL; |
| |
| if (!port->identify_valid) { |
| dev_warn(&port->dd->pdev->dev, "IDENTIFY DATA not valid\n"); |
| return -EPERM; |
| } |
| if (!(port->identify[82] & 0x1)) { |
| dev_warn(&port->dd->pdev->dev, "SMART not supported\n"); |
| return -EPERM; |
| } |
| if (!(port->identify[85] & 0x1)) { |
| dev_warn(&port->dd->pdev->dev, "SMART not enabled\n"); |
| return -EPERM; |
| } |
| |
| memset(port->smart_buf, 0, ATA_SECT_SIZE); |
| rv = mtip_get_smart_data(port, port->smart_buf, port->smart_buf_dma); |
| if (rv) { |
| dev_warn(&port->dd->pdev->dev, "Failed to ge SMART data\n"); |
| return rv; |
| } |
| |
| pattr = (struct smart_attr *)(port->smart_buf + 2); |
| for (i = 0; i < 29; i++, pattr++) |
| if (pattr->attr_id == id) { |
| memcpy(attrib, pattr, sizeof(struct smart_attr)); |
| break; |
| } |
| |
| if (i == 29) { |
| dev_warn(&port->dd->pdev->dev, |
| "Query for invalid SMART attribute ID\n"); |
| rv = -EINVAL; |
| } |
| |
| return rv; |
| } |
| |
| /* |
| * Trim unused sectors |
| * |
| * @dd pointer to driver_data structure |
| * @lba starting lba |
| * @len # of 512b sectors to trim |
| */ |
| static blk_status_t mtip_send_trim(struct driver_data *dd, unsigned int lba, |
| unsigned int len) |
| { |
| u64 tlba, tlen, sect_left; |
| struct mtip_trim_entry *buf; |
| dma_addr_t dma_addr; |
| struct host_to_dev_fis fis; |
| blk_status_t ret = BLK_STS_OK; |
| int i; |
| |
| if (!len || dd->trim_supp == false) |
| return BLK_STS_IOERR; |
| |
| /* Trim request too big */ |
| WARN_ON(len > (MTIP_MAX_TRIM_ENTRY_LEN * MTIP_MAX_TRIM_ENTRIES)); |
| |
| /* Trim request not aligned on 4k boundary */ |
| WARN_ON(len % 8 != 0); |
| |
| /* Warn if vu_trim structure is too big */ |
| WARN_ON(sizeof(struct mtip_trim) > ATA_SECT_SIZE); |
| |
| /* Allocate a DMA buffer for the trim structure */ |
| buf = dma_alloc_coherent(&dd->pdev->dev, ATA_SECT_SIZE, &dma_addr, |
| GFP_KERNEL); |
| if (!buf) |
| return BLK_STS_RESOURCE; |
| memset(buf, 0, ATA_SECT_SIZE); |
| |
| for (i = 0, sect_left = len, tlba = lba; |
| i < MTIP_MAX_TRIM_ENTRIES && sect_left; |
| i++) { |
| tlen = (sect_left >= MTIP_MAX_TRIM_ENTRY_LEN ? |
| MTIP_MAX_TRIM_ENTRY_LEN : |
| sect_left); |
| buf[i].lba = cpu_to_le32(tlba); |
| buf[i].range = cpu_to_le16(tlen); |
| tlba += tlen; |
| sect_left -= tlen; |
| } |
| WARN_ON(sect_left != 0); |
| |
| /* Build the fis */ |
| memset(&fis, 0, sizeof(struct host_to_dev_fis)); |
| fis.type = 0x27; |
| fis.opts = 1 << 7; |
| fis.command = 0xfb; |
| fis.features = 0x60; |
| fis.sect_count = 1; |
| fis.device = ATA_DEVICE_OBS; |
| |
| if (mtip_exec_internal_command(dd->port, |
| &fis, |
| 5, |
| dma_addr, |
| ATA_SECT_SIZE, |
| 0, |
| MTIP_TRIM_TIMEOUT_MS) < 0) |
| ret = BLK_STS_IOERR; |
| |
| dma_free_coherent(&dd->pdev->dev, ATA_SECT_SIZE, buf, dma_addr); |
| return ret; |
| } |
| |
| /* |
| * Get the drive capacity. |
| * |
| * @dd Pointer to the device data structure. |
| * @sectors Pointer to the variable that will receive the sector count. |
| * |
| * return value |
| * 1 Capacity was returned successfully. |
| * 0 The identify information is invalid. |
| */ |
| static bool mtip_hw_get_capacity(struct driver_data *dd, sector_t *sectors) |
| { |
| struct mtip_port *port = dd->port; |
| u64 total, raw0, raw1, raw2, raw3; |
| raw0 = port->identify[100]; |
| raw1 = port->identify[101]; |
| raw2 = port->identify[102]; |
| raw3 = port->identify[103]; |
| total = raw0 | raw1<<16 | raw2<<32 | raw3<<48; |
| *sectors = total; |
| return (bool) !!port->identify_valid; |
| } |
| |
| /* |
| * Display the identify command data. |
| * |
| * @port Pointer to the port data structure. |
| * |
| * return value |
| * None |
| */ |
| static void mtip_dump_identify(struct mtip_port *port) |
| { |
| sector_t sectors; |
| unsigned short revid; |
| char cbuf[42]; |
| |
| if (!port->identify_valid) |
| return; |
| |
| strlcpy(cbuf, (char *)(port->identify+10), 21); |
| dev_info(&port->dd->pdev->dev, |
| "Serial No.: %s\n", cbuf); |
| |
| strlcpy(cbuf, (char *)(port->identify+23), 9); |
| dev_info(&port->dd->pdev->dev, |
| "Firmware Ver.: %s\n", cbuf); |
| |
| strlcpy(cbuf, (char *)(port->identify+27), 41); |
| dev_info(&port->dd->pdev->dev, "Model: %s\n", cbuf); |
| |
| dev_info(&port->dd->pdev->dev, "Security: %04x %s\n", |
| port->identify[128], |
| port->identify[128] & 0x4 ? "(LOCKED)" : ""); |
| |
| if (mtip_hw_get_capacity(port->dd, §ors)) |
| dev_info(&port->dd->pdev->dev, |
| "Capacity: %llu sectors (%llu MB)\n", |
| (u64)sectors, |
| ((u64)sectors) * ATA_SECT_SIZE >> 20); |
| |
| pci_read_config_word(port->dd->pdev, PCI_REVISION_ID, &revid); |
| switch (revid & 0xFF) { |
| case 0x1: |
| strlcpy(cbuf, "A0", 3); |
| break; |
| case 0x3: |
| strlcpy(cbuf, "A2", 3); |
| break; |
| default: |
| strlcpy(cbuf, "?", 2); |
| break; |
| } |
| dev_info(&port->dd->pdev->dev, |
| "Card Type: %s\n", cbuf); |
| } |
| |
| /* |
| * Map the commands scatter list into the command table. |
| * |
| * @command Pointer to the command. |
| * @nents Number of scatter list entries. |
| * |
| * return value |
| * None |
| */ |
| static inline void fill_command_sg(struct driver_data *dd, |
| struct mtip_cmd *command, |
| int nents) |
| { |
| int n; |
| unsigned int dma_len; |
| struct mtip_cmd_sg *command_sg; |
| struct scatterlist *sg; |
| |
| command_sg = command->command + AHCI_CMD_TBL_HDR_SZ; |
| |
| for_each_sg(command->sg, sg, nents, n) { |
| dma_len = sg_dma_len(sg); |
| if (dma_len > 0x400000) |
| dev_err(&dd->pdev->dev, |
| "DMA segment length truncated\n"); |
| command_sg->info = cpu_to_le32((dma_len-1) & 0x3FFFFF); |
| command_sg->dba = cpu_to_le32(sg_dma_address(sg)); |
| command_sg->dba_upper = |
| cpu_to_le32((sg_dma_address(sg) >> 16) >> 16); |
| command_sg++; |
| } |
| } |
| |
| /* |
| * @brief Execute a drive command. |
| * |
| * return value 0 The command completed successfully. |
| * return value -1 An error occurred while executing the command. |
| */ |
| static int exec_drive_task(struct mtip_port *port, u8 *command) |
| { |
| struct host_to_dev_fis fis; |
| struct host_to_dev_fis *reply = (port->rxfis + RX_FIS_D2H_REG); |
| unsigned int to; |
| |
| /* Build the FIS. */ |
| memset(&fis, 0, sizeof(struct host_to_dev_fis)); |
| fis.type = 0x27; |
| fis.opts = 1 << 7; |
| fis.command = command[0]; |
| fis.features = command[1]; |
| fis.sect_count = command[2]; |
| fis.sector = command[3]; |
| fis.cyl_low = command[4]; |
| fis.cyl_hi = command[5]; |
| fis.device = command[6] & ~0x10; /* Clear the dev bit*/ |
| |
| mtip_set_timeout(port->dd, &fis, &to, 0); |
| |
| dbg_printk(MTIP_DRV_NAME " %s: User Command: cmd %x, feat %x, nsect %x, sect %x, lcyl %x, hcyl %x, sel %x\n", |
| __func__, |
| command[0], |
| command[1], |
| command[2], |
| command[3], |
| command[4], |
| command[5], |
| command[6]); |
| |
| /* Execute the command. */ |
| if (mtip_exec_internal_command(port, |
| &fis, |
| 5, |
| 0, |
| 0, |
| 0, |
| to) < 0) { |
| return -1; |
| } |
| |
| command[0] = reply->command; /* Status*/ |
| command[1] = reply->features; /* Error*/ |
| command[4] = reply->cyl_low; |
| command[5] = reply->cyl_hi; |
| |
| dbg_printk(MTIP_DRV_NAME " %s: Completion Status: stat %x, err %x , cyl_lo %x cyl_hi %x\n", |
| __func__, |
| command[0], |
| command[1], |
| command[4], |
| command[5]); |
| |
| return 0; |
| } |
| |
| /* |
| * @brief Execute a drive command. |
| * |
| * @param port Pointer to the port data structure. |
| * @param command Pointer to the user specified command parameters. |
| * @param user_buffer Pointer to the user space buffer where read sector |
| * data should be copied. |
| * |
| * return value 0 The command completed successfully. |
| * return value -EFAULT An error occurred while copying the completion |
| * data to the user space buffer. |
| * return value -1 An error occurred while executing the command. |
| */ |
| static int exec_drive_command(struct mtip_port *port, u8 *command, |
| void __user *user_buffer) |
| { |
| struct host_to_dev_fis fis; |
| struct host_to_dev_fis *reply; |
| u8 *buf = NULL; |
| dma_addr_t dma_addr = 0; |
| int rv = 0, xfer_sz = command[3]; |
| unsigned int to; |
| |
| if (xfer_sz) { |
| if (!user_buffer) |
| return -EFAULT; |
| |
| buf = dma_alloc_coherent(&port->dd->pdev->dev, |
| ATA_SECT_SIZE * xfer_sz, |
| &dma_addr, |
| GFP_KERNEL); |
| if (!buf) { |
| dev_err(&port->dd->pdev->dev, |
| "Memory allocation failed (%d bytes)\n", |
| ATA_SECT_SIZE * xfer_sz); |
| return -ENOMEM; |
| } |
| memset(buf, 0, ATA_SECT_SIZE * xfer_sz); |
| } |
| |
| /* Build the FIS. */ |
| memset(&fis, 0, sizeof(struct host_to_dev_fis)); |
| fis.type = 0x27; |
| fis.opts = 1 << 7; |
| fis.command = command[0]; |
| fis.features = command[2]; |
| fis.sect_count = command[3]; |
| if (fis.command == ATA_CMD_SMART) { |
| fis.sector = command[1]; |
| fis.cyl_low = 0x4F; |
| fis.cyl_hi = 0xC2; |
| } |
| |
| mtip_set_timeout(port->dd, &fis, &to, 0); |
| |
| if (xfer_sz) |
| reply = (port->rxfis + RX_FIS_PIO_SETUP); |
| else |
| reply = (port->rxfis + RX_FIS_D2H_REG); |
| |
| dbg_printk(MTIP_DRV_NAME |
| " %s: User Command: cmd %x, sect %x, " |
| "feat %x, sectcnt %x\n", |
| __func__, |
| command[0], |
| command[1], |
| command[2], |
| command[3]); |
| |
| /* Execute the command. */ |
| if (mtip_exec_internal_command(port, |
| &fis, |
| 5, |
| (xfer_sz ? dma_addr : 0), |
| (xfer_sz ? ATA_SECT_SIZE * xfer_sz : 0), |
| 0, |
| to) |
| < 0) { |
| rv = -EFAULT; |
| goto exit_drive_command; |
| } |
| |
| /* Collect the completion status. */ |
| command[0] = reply->command; /* Status*/ |
| command[1] = reply->features; /* Error*/ |
| command[2] = reply->sect_count; |
| |
| dbg_printk(MTIP_DRV_NAME |
| " %s: Completion Status: stat %x, " |
| "err %x, nsect %x\n", |
| __func__, |
| command[0], |
| command[1], |
| command[2]); |
| |
| if (xfer_sz) { |
| if (copy_to_user(user_buffer, |
| buf, |
| ATA_SECT_SIZE * command[3])) { |
| rv = -EFAULT; |
| goto exit_drive_command; |
| } |
| } |
| exit_drive_command: |
| if (buf) |
| dma_free_coherent(&port->dd->pdev->dev, |
| ATA_SECT_SIZE * xfer_sz, buf, dma_addr); |
| return rv; |
| } |
| |
| /* |
| * Indicates whether a command has a single sector payload. |
| * |
| * @command passed to the device to perform the certain event. |
| * @features passed to the device to perform the certain event. |
| * |
| * return value |
| * 1 command is one that always has a single sector payload, |
| * regardless of the value in the Sector Count field. |
| * 0 otherwise |
| * |
| */ |
| static unsigned int implicit_sector(unsigned char command, |
| unsigned char features) |
| { |
| unsigned int rv = 0; |
| |
| /* list of commands that have an implicit sector count of 1 */ |
| switch (command) { |
| case ATA_CMD_SEC_SET_PASS: |
| case ATA_CMD_SEC_UNLOCK: |
| case ATA_CMD_SEC_ERASE_PREP: |
| case ATA_CMD_SEC_ERASE_UNIT: |
| case ATA_CMD_SEC_FREEZE_LOCK: |
| case ATA_CMD_SEC_DISABLE_PASS: |
| case ATA_CMD_PMP_READ: |
| case ATA_CMD_PMP_WRITE: |
| rv = 1; |
| break; |
| case ATA_CMD_SET_MAX: |
| if (features == ATA_SET_MAX_UNLOCK) |
| rv = 1; |
| break; |
| case ATA_CMD_SMART: |
| if ((features == ATA_SMART_READ_VALUES) || |
| (features == ATA_SMART_READ_THRESHOLDS)) |
| rv = 1; |
| break; |
| case ATA_CMD_CONF_OVERLAY: |
| if ((features == ATA_DCO_IDENTIFY) || |
| (features == ATA_DCO_SET)) |
| rv = 1; |
| break; |
| } |
| return rv; |
| } |
| |
| /* |
| * Executes a taskfile |
| * See ide_taskfile_ioctl() for derivation |
| */ |
| static int exec_drive_taskfile(struct driver_data *dd, |
| void __user *buf, |
| ide_task_request_t *req_task, |
| int outtotal) |
| { |
| struct host_to_dev_fis fis; |
| struct host_to_dev_fis *reply; |
| u8 *outbuf = NULL; |
| u8 *inbuf = NULL; |
| dma_addr_t outbuf_dma = 0; |
| dma_addr_t inbuf_dma = 0; |
| dma_addr_t dma_buffer = 0; |
| int err = 0; |
| unsigned int taskin = 0; |
| unsigned int taskout = 0; |
| u8 nsect = 0; |
| unsigned int timeout; |
| unsigned int force_single_sector; |
| unsigned int transfer_size; |
| unsigned long task_file_data; |
| int intotal = outtotal + req_task->out_size; |
| int erasemode = 0; |
| |
| taskout = req_task->out_size; |
| taskin = req_task->in_size; |
| /* 130560 = 512 * 0xFF*/ |
| if (taskin > 130560 || taskout > 130560) |
| return -EINVAL; |
| |
| if (taskout) { |
| outbuf = memdup_user(buf + outtotal, taskout); |
| if (IS_ERR(outbuf)) |
| return PTR_ERR(outbuf); |
| |
| outbuf_dma = dma_map_single(&dd->pdev->dev, outbuf, |
| taskout, DMA_TO_DEVICE); |
| if (dma_mapping_error(&dd->pdev->dev, outbuf_dma)) { |
| err = -ENOMEM; |
| goto abort; |
| } |
| dma_buffer = outbuf_dma; |
| } |
| |
| if (taskin) { |
| inbuf = memdup_user(buf + intotal, taskin); |
| if (IS_ERR(inbuf)) { |
| err = PTR_ERR(inbuf); |
| inbuf = NULL; |
| goto abort; |
| } |
| inbuf_dma = dma_map_single(&dd->pdev->dev, inbuf, |
| taskin, DMA_FROM_DEVICE); |
| if (dma_mapping_error(&dd->pdev->dev, inbuf_dma)) { |
| err = -ENOMEM; |
| goto abort; |
| } |
| dma_buffer = inbuf_dma; |
| } |
| |
| /* only supports PIO and non-data commands from this ioctl. */ |
| switch (req_task->data_phase) { |
| case TASKFILE_OUT: |
| nsect = taskout / ATA_SECT_SIZE; |
| reply = (dd->port->rxfis + RX_FIS_PIO_SETUP); |
| break; |
| case TASKFILE_IN: |
| reply = (dd->port->rxfis + RX_FIS_PIO_SETUP); |
| break; |
| case TASKFILE_NO_DATA: |
| reply = (dd->port->rxfis + RX_FIS_D2H_REG); |
| break; |
| default: |
| err = -EINVAL; |
| goto abort; |
| } |
| |
| /* Build the FIS. */ |
| memset(&fis, 0, sizeof(struct host_to_dev_fis)); |
| |
| fis.type = 0x27; |
| fis.opts = 1 << 7; |
| fis.command = req_task->io_ports[7]; |
| fis.features = req_task->io_ports[1]; |
| fis.sect_count = req_task->io_ports[2]; |
| fis.lba_low = req_task->io_ports[3]; |
| fis.lba_mid = req_task->io_ports[4]; |
| fis.lba_hi = req_task->io_ports[5]; |
| /* Clear the dev bit*/ |
| fis.device = req_task->io_ports[6] & ~0x10; |
| |
| if ((req_task->in_flags.all == 0) && (req_task->out_flags.all & 1)) { |
| req_task->in_flags.all = |
| IDE_TASKFILE_STD_IN_FLAGS | |
| (IDE_HOB_STD_IN_FLAGS << 8); |
| fis.lba_low_ex = req_task->hob_ports[3]; |
| fis.lba_mid_ex = req_task->hob_ports[4]; |
| fis.lba_hi_ex = req_task->hob_ports[5]; |
| fis.features_ex = req_task->hob_ports[1]; |
| fis.sect_cnt_ex = req_task->hob_ports[2]; |
| |
| } else { |
| req_task->in_flags.all = IDE_TASKFILE_STD_IN_FLAGS; |
| } |
| |
| force_single_sector = implicit_sector(fis.command, fis.features); |
| |
| if ((taskin || taskout) && (!fis.sect_count)) { |
| if (nsect) |
| fis.sect_count = nsect; |
| else { |
| if (!force_single_sector) { |
| dev_warn(&dd->pdev->dev, |
| "data movement but " |
| "sect_count is 0\n"); |
| err = -EINVAL; |
| goto abort; |
| } |
| } |
| } |
| |
| dbg_printk(MTIP_DRV_NAME |
| " %s: cmd %x, feat %x, nsect %x," |
| " sect/lbal %x, lcyl/lbam %x, hcyl/lbah %x," |
| " head/dev %x\n", |
| __func__, |
| fis.command, |
| fis.features, |
| fis.sect_count, |
| fis.lba_low, |
| fis.lba_mid, |
| fis.lba_hi, |
| fis.device); |
| |
| /* check for erase mode support during secure erase.*/ |
| if ((fis.command == ATA_CMD_SEC_ERASE_UNIT) && outbuf && |
| (outbuf[0] & MTIP_SEC_ERASE_MODE)) { |
| erasemode = 1; |
| } |
| |
| mtip_set_timeout(dd, &fis, &timeout, erasemode); |
| |
| /* Determine the correct transfer size.*/ |
| if (force_single_sector) |
| transfer_size = ATA_SECT_SIZE; |
| else |
| transfer_size = ATA_SECT_SIZE * fis.sect_count; |
| |
| /* Execute the command.*/ |
| if (mtip_exec_internal_command(dd->port, |
| &fis, |
| 5, |
| dma_buffer, |
| transfer_size, |
| 0, |
| timeout) < 0) { |
| err = -EIO; |
| goto abort; |
| } |
| |
| task_file_data = readl(dd->port->mmio+PORT_TFDATA); |
| |
| if ((req_task->data_phase == TASKFILE_IN) && !(task_file_data & 1)) { |
| reply = dd->port->rxfis + RX_FIS_PIO_SETUP; |
| req_task->io_ports[7] = reply->control; |
| } else { |
| reply = dd->port->rxfis + RX_FIS_D2H_REG; |
| req_task->io_ports[7] = reply->command; |
| } |
| |
| /* reclaim the DMA buffers.*/ |
| if (inbuf_dma) |
| dma_unmap_single(&dd->pdev->dev, inbuf_dma, taskin, |
| DMA_FROM_DEVICE); |
| if (outbuf_dma) |
| dma_unmap_single(&dd->pdev->dev, outbuf_dma, taskout, |
| DMA_TO_DEVICE); |
| inbuf_dma = 0; |
| outbuf_dma = 0; |
| |
| /* return the ATA registers to the caller.*/ |
| req_task->io_ports[1] = reply->features; |
| req_task->io_ports[2] = reply->sect_count; |
| req_task->io_ports[3] = reply->lba_low; |
| req_task->io_ports[4] = reply->lba_mid; |
| req_task->io_ports[5] = reply->lba_hi; |
| req_task->io_ports[6] = reply->device; |
| |
| if (req_task->out_flags.all & 1) { |
| |
| req_task->hob_ports[3] = reply->lba_low_ex; |
| req_task->hob_ports[4] = reply->lba_mid_ex; |
| req_task->hob_ports[5] = reply->lba_hi_ex; |
| req_task->hob_ports[1] = reply->features_ex; |
| req_task->hob_ports[2] = reply->sect_cnt_ex; |
| } |
| dbg_printk(MTIP_DRV_NAME |
| " %s: Completion: stat %x," |
| "err %x, sect_cnt %x, lbalo %x," |
| "lbamid %x, lbahi %x, dev %x\n", |
| __func__, |
| req_task->io_ports[7], |
| req_task->io_ports[1], |
| req_task->io_ports[2], |
| req_task->io_ports[3], |
| req_task->io_ports[4], |
| req_task->io_ports[5], |
| req_task->io_ports[6]); |
| |
| if (taskout) { |
| if (copy_to_user(buf + outtotal, outbuf, taskout)) { |
| err = -EFAULT; |
| goto abort; |
| } |
| } |
| if (taskin) { |
| if (copy_to_user(buf + intotal, inbuf, taskin)) { |
| err = -EFAULT; |
| goto abort; |
| } |
| } |
| abort: |
| if (inbuf_dma) |
| dma_unmap_single(&dd->pdev->dev, inbuf_dma, taskin, |
| DMA_FROM_DEVICE); |
| if (outbuf_dma) |
| dma_unmap_single(&dd->pdev->dev, outbuf_dma, taskout, |
| DMA_TO_DEVICE); |
| kfree(outbuf); |
| kfree(inbuf); |
| |
| return err; |
| } |
| |
| /* |
| * Handle IOCTL calls from the Block Layer. |
| * |
| * This function is called by the Block Layer when it receives an IOCTL |
| * command that it does not understand. If the IOCTL command is not supported |
| * this function returns -ENOTTY. |
| * |
| * @dd Pointer to the driver data structure. |
| * @cmd IOCTL command passed from the Block Layer. |
| * @arg IOCTL argument passed from the Block Layer. |
| * |
| * return value |
| * 0 The IOCTL completed successfully. |
| * -ENOTTY The specified command is not supported. |
| * -EFAULT An error occurred copying data to a user space buffer. |
| * -EIO An error occurred while executing the command. |
| */ |
| static int mtip_hw_ioctl(struct driver_data *dd, unsigned int cmd, |
| unsigned long arg) |
| { |
| switch (cmd) { |
| case HDIO_GET_IDENTITY: |
| { |
| if (copy_to_user((void __user *)arg, dd->port->identify, |
| sizeof(u16) * ATA_ID_WORDS)) |
| return -EFAULT; |
| break; |
| } |
| case HDIO_DRIVE_CMD: |
| { |
| u8 drive_command[4]; |
| |
| /* Copy the user command info to our buffer. */ |
| if (copy_from_user(drive_command, |
| (void __user *) arg, |
| sizeof(drive_command))) |
| return -EFAULT; |
| |
| /* Execute the drive command. */ |
| if (exec_drive_command(dd->port, |
| drive_command, |
| (void __user *) (arg+4))) |
| return -EIO; |
| |
| /* Copy the status back to the users buffer. */ |
| if (copy_to_user((void __user *) arg, |
| drive_command, |
| sizeof(drive_command))) |
| return -EFAULT; |
| |
| break; |
| } |
| case HDIO_DRIVE_TASK: |
| { |
| u8 drive_command[7]; |
| |
| /* Copy the user command info to our buffer. */ |
| if (copy_from_user(drive_command, |
| (void __user *) arg, |
| sizeof(drive_command))) |
| return -EFAULT; |
| |
| /* Execute the drive command. */ |
| if (exec_drive_task(dd->port, drive_command)) |
| return -EIO; |
| |
| /* Copy the status back to the users buffer. */ |
| if (copy_to_user((void __user *) arg, |
| drive_command, |
| sizeof(drive_command))) |
| return -EFAULT; |
| |
| break; |
| } |
| case HDIO_DRIVE_TASKFILE: { |
| ide_task_request_t req_task; |
| int ret, outtotal; |
| |
| if (copy_from_user(&req_task, (void __user *) arg, |
| sizeof(req_task))) |
| return -EFAULT; |
| |
| outtotal = sizeof(req_task); |
| |
| ret = exec_drive_taskfile(dd, (void __user *) arg, |
| &req_task, outtotal); |
| |
| if (copy_to_user((void __user *) arg, &req_task, |
| sizeof(req_task))) |
| return -EFAULT; |
| |
| return ret; |
| } |
| |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| /* |
| * Submit an IO to the hw |
| * |
| * This function is called by the block layer to issue an io |
| * to the device. Upon completion, the callback function will |
| * be called with the data parameter passed as the callback data. |
| * |
| * @dd Pointer to the driver data structure. |
| * @start First sector to read. |
| * @nsect Number of sectors to read. |
| * @tag The tag of this read command. |
| * @callback Pointer to the function that should be called |
| * when the read completes. |
| * @data Callback data passed to the callback function |
| * when the read completes. |
| * @dir Direction (read or write) |
| * |
| * return value |
| * None |
| */ |
| static void mtip_hw_submit_io(struct driver_data *dd, struct request *rq, |
| struct mtip_cmd *command, |
| struct blk_mq_hw_ctx *hctx) |
| { |
| struct mtip_cmd_hdr *hdr = |
| dd->port->command_list + sizeof(struct mtip_cmd_hdr) * rq->tag; |
| struct host_to_dev_fis *fis; |
| struct mtip_port *port = dd->port; |
| int dma_dir = rq_data_dir(rq) == READ ? DMA_FROM_DEVICE : DMA_TO_DEVICE; |
| u64 start = blk_rq_pos(rq); |
| unsigned int nsect = blk_rq_sectors(rq); |
| unsigned int nents; |
| |
| /* Map the scatter list for DMA access */ |
| nents = blk_rq_map_sg(hctx->queue, rq, command->sg); |
| nents = dma_map_sg(&dd->pdev->dev, command->sg, nents, dma_dir); |
| |
| prefetch(&port->flags); |
| |
| command->scatter_ents = nents; |
| |
| /* |
| * The number of retries for this command before it is |
| * reported as a failure to the upper layers. |
| */ |
| command->retries = MTIP_MAX_RETRIES; |
| |
| /* Fill out fis */ |
| fis = command->command; |
| fis->type = 0x27; |
| fis->opts = 1 << 7; |
| if (dma_dir == DMA_FROM_DEVICE) |
| fis->command = ATA_CMD_FPDMA_READ; |
| else |
| fis->command = ATA_CMD_FPDMA_WRITE; |
| fis->lba_low = start & 0xFF; |
| fis->lba_mid = (start >> 8) & 0xFF; |
| fis->lba_hi = (start >> 16) & 0xFF; |
| fis->lba_low_ex = (start >> 24) & 0xFF; |
| fis->lba_mid_ex = (start >> 32) & 0xFF; |
| fis->lba_hi_ex = (start >> 40) & 0xFF; |
| fis->device = 1 << 6; |
| fis->features = nsect & 0xFF; |
| fis->features_ex = (nsect >> 8) & 0xFF; |
| fis->sect_count = ((rq->tag << 3) | (rq->tag >> 5)); |
| fis->sect_cnt_ex = 0; |
| fis->control = 0; |
| fis->res2 = 0; |
| fis->res3 = 0; |
| fill_command_sg(dd, command, nents); |
| |
| if (unlikely(command->unaligned)) |
| fis->device |= 1 << 7; |
| |
| /* Populate the command header */ |
| hdr->ctba = cpu_to_le32(command->command_dma & 0xFFFFFFFF); |
| if (test_bit(MTIP_PF_HOST_CAP_64, &dd->port->flags)) |
| hdr->ctbau = cpu_to_le32((command->command_dma >> 16) >> 16); |
| hdr->opts = cpu_to_le32((nents << 16) | 5 | AHCI_CMD_PREFETCH); |
| hdr->byte_count = 0; |
| |
| command->direction = dma_dir; |
| |
| /* |
| * To prevent this command from being issued |
| * if an internal command is in progress or error handling is active. |
| */ |
| if (unlikely(port->flags & MTIP_PF_PAUSE_IO)) { |
| set_bit(rq->tag, port->cmds_to_issue); |
| set_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags); |
| return; |
| } |
| |
| /* Issue the command to the hardware */ |
| mtip_issue_ncq_command(port, rq->tag); |
| } |
| |
| /* |
| * Sysfs status dump. |
| * |
| * @dev Pointer to the device structure, passed by the kernrel. |
| * @attr Pointer to the device_attribute structure passed by the kernel. |
| * @buf Pointer to the char buffer that will receive the stats info. |
| * |
| * return value |
| * The size, in bytes, of the data copied into buf. |
| */ |
| static ssize_t mtip_hw_show_status(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct driver_data *dd = dev_to_disk(dev)->private_data; |
| int size = 0; |
| |
| if (test_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag)) |
| size += sprintf(buf, "%s", "thermal_shutdown\n"); |
| else if (test_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag)) |
| size += sprintf(buf, "%s", "write_protect\n"); |
| else |
| size += sprintf(buf, "%s", "online\n"); |
| |
| return size; |
| } |
| |
| static DEVICE_ATTR(status, 0444, mtip_hw_show_status, NULL); |
| |
| /* debugsfs entries */ |
| |
| static ssize_t show_device_status(struct device_driver *drv, char *buf) |
| { |
| int size = 0; |
| struct driver_data *dd, *tmp; |
| unsigned long flags; |
| char id_buf[42]; |
| u16 status = 0; |
| |
| spin_lock_irqsave(&dev_lock, flags); |
| size += sprintf(&buf[size], "Devices Present:\n"); |
| list_for_each_entry_safe(dd, tmp, &online_list, online_list) { |
| if (dd->pdev) { |
| if (dd->port && |
| dd->port->identify && |
| dd->port->identify_valid) { |
| strlcpy(id_buf, |
| (char *) (dd->port->identify + 10), 21); |
| status = *(dd->port->identify + 141); |
| } else { |
| memset(id_buf, 0, 42); |
| status = 0; |
| } |
| |
| if (dd->port && |
| test_bit(MTIP_PF_REBUILD_BIT, &dd->port->flags)) { |
| size += sprintf(&buf[size], |
| " device %s %s (ftl rebuild %d %%)\n", |
| dev_name(&dd->pdev->dev), |
| id_buf, |
| status); |
| } else { |
| size += sprintf(&buf[size], |
| " device %s %s\n", |
| dev_name(&dd->pdev->dev), |
| id_buf); |
| } |
| } |
| } |
| |
| size += sprintf(&buf[size], "Devices Being Removed:\n"); |
| list_for_each_entry_safe(dd, tmp, &removing_list, remove_list) { |
| if (dd->pdev) { |
| if (dd->port && |
| dd->port->identify && |
| dd->port->identify_valid) { |
| strlcpy(id_buf, |
| (char *) (dd->port->identify+10), 21); |
| status = *(dd->port->identify + 141); |
| } else { |
| memset(id_buf, 0, 42); |
| status = 0; |
| } |
| |
| if (dd->port && |
| test_bit(MTIP_PF_REBUILD_BIT, &dd->port->flags)) { |
| size += sprintf(&buf[size], |
| " device %s %s (ftl rebuild %d %%)\n", |
| dev_name(&dd->pdev->dev), |
| id_buf, |
| status); |
| } else { |
| size += sprintf(&buf[size], |
| " device %s %s\n", |
| dev_name(&dd->pdev->dev), |
| id_buf); |
| } |
| } |
| } |
| spin_unlock_irqrestore(&dev_lock, flags); |
| |
| return size; |
| } |
| |
| static ssize_t mtip_hw_read_device_status(struct file *f, char __user *ubuf, |
| size_t len, loff_t *offset) |
| { |
| struct driver_data *dd = (struct driver_data *)f->private_data; |
| int size = *offset; |
| char *buf; |
| int rv = 0; |
| |
| if (!len || *offset) |
| return 0; |
| |
| buf = kzalloc(MTIP_DFS_MAX_BUF_SIZE, GFP_KERNEL); |
| if (!buf) { |
| dev_err(&dd->pdev->dev, |
| "Memory allocation: status buffer\n"); |
| return -ENOMEM; |
| } |
| |
| size += show_device_status(NULL, buf); |
| |
| *offset = size <= len ? size : len; |
| size = copy_to_user(ubuf, buf, *offset); |
| if (size) |
| rv = -EFAULT; |
| |
| kfree(buf); |
| return rv ? rv : *offset; |
| } |
| |
| static ssize_t mtip_hw_read_registers(struct file *f, char __user *ubuf, |
| size_t len, loff_t *offset) |
| { |
| struct driver_data *dd = (struct driver_data *)f->private_data; |
| char *buf; |
| u32 group_allocated; |
| int size = *offset; |
| int n, rv = 0; |
| |
| if (!len || size) |
| return 0; |
| |
| buf = kzalloc(MTIP_DFS_MAX_BUF_SIZE, GFP_KERNEL); |
| if (!buf) { |
| dev_err(&dd->pdev->dev, |
| "Memory allocation: register buffer\n"); |
| return -ENOMEM; |
| } |
| |
| size += sprintf(&buf[size], "H/ S ACTive : [ 0x"); |
| |
| for (n = dd->slot_groups-1; n >= 0; n--) |
| size += sprintf(&buf[size], "%08X ", |
| readl(dd->port->s_active[n])); |
| |
| size += sprintf(&buf[size], "]\n"); |
| size += sprintf(&buf[size], "H/ Command Issue : [ 0x"); |
| |
| for (n = dd->slot_groups-1; n >= 0; n--) |
| size += sprintf(&buf[size], "%08X ", |
| readl(dd->port->cmd_issue[n])); |
| |
| size += sprintf(&buf[size], "]\n"); |
| size += sprintf(&buf[size], "H/ Completed : [ 0x"); |
| |
| for (n = dd->slot_groups-1; n >= 0; n--) |
| size += sprintf(&buf[size], "%08X ", |
| readl(dd->port->completed[n])); |
| |
| size += sprintf(&buf[size], "]\n"); |
| size += sprintf(&buf[size], "H/ PORT IRQ STAT : [ 0x%08X ]\n", |
| readl(dd->port->mmio + PORT_IRQ_STAT)); |
| size += sprintf(&buf[size], "H/ HOST IRQ STAT : [ 0x%08X ]\n", |
| readl(dd->mmio + HOST_IRQ_STAT)); |
| size += sprintf(&buf[size], "\n"); |
| |
| size += sprintf(&buf[size], "L/ Commands in Q : [ 0x"); |
| |
| for (n = dd->slot_groups-1; n >= 0; n--) { |
| if (sizeof(long) > sizeof(u32)) |
| group_allocated = |
| dd->port->cmds_to_issue[n/2] >> (32*(n&1)); |
| else |
| group_allocated = dd->port->cmds_to_issue[n]; |
| size += sprintf(&buf[size], "%08X ", group_allocated); |
| } |
| size += sprintf(&buf[size], "]\n"); |
| |
| *offset = size <= len ? size : len; |
| size = copy_to_user(ubuf, buf, *offset); |
| if (size) |
| rv = -EFAULT; |
| |
| kfree(buf); |
| return rv ? rv : *offset; |
| } |
| |
| static ssize_t mtip_hw_read_flags(struct file *f, char __user *ubuf, |
| size_t len, loff_t *offset) |
| { |
| struct driver_data *dd = (struct driver_data *)f->private_data; |
| char *buf; |
| int size = *offset; |
| int rv = 0; |
| |
| if (!len || size) |
| return 0; |
| |
| buf = kzalloc(MTIP_DFS_MAX_BUF_SIZE, GFP_KERNEL); |
| if (!buf) { |
| dev_err(&dd->pdev->dev, |
| "Memory allocation: flag buffer\n"); |
| return -ENOMEM; |
| } |
| |
| size += sprintf(&buf[size], "Flag-port : [ %08lX ]\n", |
| dd->port->flags); |
| size += sprintf(&buf[size], "Flag-dd : [ %08lX ]\n", |
| dd->dd_flag); |
| |
| *offset = size <= len ? size : len; |
| size = copy_to_user(ubuf, buf, *offset); |
| if (size) |
| rv = -EFAULT; |
| |
| kfree(buf); |
| return rv ? rv : *offset; |
| } |
| |
| static const struct file_operations mtip_device_status_fops = { |
| .owner = THIS_MODULE, |
| .open = simple_open, |
| .read = mtip_hw_read_device_status, |
| .llseek = no_llseek, |
| }; |
| |
| static const struct file_operations mtip_regs_fops = { |
| .owner = THIS_MODULE, |
| .open = simple_open, |
| .read = mtip_hw_read_registers, |
| .llseek = no_llseek, |
| }; |
| |
| static const struct file_operations mtip_flags_fops = { |
| .owner = THIS_MODULE, |
| .open = simple_open, |
| .read = mtip_hw_read_flags, |
| .llseek = no_llseek, |
| }; |
| |
| /* |
| * Create the sysfs related attributes. |
| * |
| * @dd Pointer to the driver data structure. |
| * @kobj Pointer to the kobj for the block device. |
| * |
| * return value |
| * 0 Operation completed successfully. |
| * -EINVAL Invalid parameter. |
| */ |
| static int mtip_hw_sysfs_init(struct driver_data *dd, struct kobject *kobj) |
| { |
| if (!kobj || !dd) |
| return -EINVAL; |
| |
| if (sysfs_create_file(kobj, &dev_attr_status.attr)) |
| dev_warn(&dd->pdev->dev, |
| "Error creating 'status' sysfs entry\n"); |
| return 0; |
| } |
| |
| /* |
| * Remove the sysfs related attributes. |
| * |
| * @dd Pointer to the driver data structure. |
| * @kobj Pointer to the kobj for the block device. |
| * |
| * return value |
| * 0 Operation completed successfully. |
| * -EINVAL Invalid parameter. |
| */ |
| static int mtip_hw_sysfs_exit(struct driver_data *dd, struct kobject *kobj) |
| { |
| if (!kobj || !dd) |
| return -EINVAL; |
| |
| sysfs_remove_file(kobj, &dev_attr_status.attr); |
| |
| return 0; |
| } |
| |
| static int mtip_hw_debugfs_init(struct driver_data *dd) |
| { |
| if (!dfs_parent) |
| return -1; |
| |
| dd->dfs_node = debugfs_create_dir(dd->disk->disk_name, dfs_parent); |
| if (IS_ERR_OR_NULL(dd->dfs_node)) { |
| dev_warn(&dd->pdev->dev, |
| "Error creating node %s under debugfs\n", |
| dd->disk->disk_name); |
| dd->dfs_node = NULL; |
| return -1; |
| } |
| |
| debugfs_create_file("flags", 0444, dd->dfs_node, dd, &mtip_flags_fops); |
| debugfs_create_file("registers", 0444, dd->dfs_node, dd, |
| &mtip_regs_fops); |
| |
| return 0; |
| } |
| |
| static void mtip_hw_debugfs_exit(struct driver_data *dd) |
| { |
| debugfs_remove_recursive(dd->dfs_node); |
| } |
| |
| /* |
| * Perform any init/resume time hardware setup |
| * |
| * @dd Pointer to the driver data structure. |
| * |
| * return value |
| * None |
| */ |
| static inline void hba_setup(struct driver_data *dd) |
| { |
| u32 hwdata; |
| hwdata = readl(dd->mmio + HOST_HSORG); |
| |
| /* interrupt bug workaround: use only 1 IS bit.*/ |
| writel(hwdata | |
| HSORG_DISABLE_SLOTGRP_INTR | |
| HSORG_DISABLE_SLOTGRP_PXIS, |
| dd->mmio + HOST_HSORG); |
| } |
| |
| static int mtip_device_unaligned_constrained(struct driver_data *dd) |
| { |
| return (dd->pdev->device == P420M_DEVICE_ID ? 1 : 0); |
| } |
| |
| /* |
| * Detect the details of the product, and store anything needed |
| * into the driver data structure. This includes product type and |
| * version and number of slot groups. |
| * |
| * @dd Pointer to the driver data structure. |
| * |
| * return value |
| * None |
| */ |
| static void mtip_detect_product(struct driver_data *dd) |
| { |
| u32 hwdata; |
| unsigned int rev, slotgroups; |
| |
| /* |
| * HBA base + 0xFC [15:0] - vendor-specific hardware interface |
| * info register: |
| * [15:8] hardware/software interface rev# |
| * [ 3] asic-style interface |
| * [ 2:0] number of slot groups, minus 1 (only valid for asic-style). |
| */ |
| hwdata = readl(dd->mmio + HOST_HSORG); |
| |
| dd->product_type = MTIP_PRODUCT_UNKNOWN; |
| dd->slot_groups = 1; |
| |
| if (hwdata & 0x8) { |
| dd->product_type = MTIP_PRODUCT_ASICFPGA; |
| rev = (hwdata & HSORG_HWREV) >> 8; |
| slotgroups = (hwdata & HSORG_SLOTGROUPS) + 1; |
| dev_info(&dd->pdev->dev, |
| "ASIC-FPGA design, HS rev 0x%x, " |
| "%i slot groups [%i slots]\n", |
| rev, |
| slotgroups, |
| slotgroups * 32); |
| |
| if (slotgroups > MTIP_MAX_SLOT_GROUPS) { |
| dev_warn(&dd->pdev->dev, |
| "Warning: driver only supports " |
| "%i slot groups.\n", MTIP_MAX_SLOT_GROUPS); |
| slotgroups = MTIP_MAX_SLOT_GROUPS; |
| } |
| dd->slot_groups = slotgroups; |
| return; |
| } |
| |
| dev_warn(&dd->pdev->dev, "Unrecognized product id\n"); |
| } |
| |
| /* |
| * Blocking wait for FTL rebuild to complete |
| * |
| * @dd Pointer to the DRIVER_DATA structure. |
| * |
| * return value |
| * 0 FTL rebuild completed successfully |
| * -EFAULT FTL rebuild error/timeout/interruption |
| */ |
| static int mtip_ftl_rebuild_poll(struct driver_data *dd) |
| { |
| unsigned long timeout, cnt = 0, start; |
| |
| dev_warn(&dd->pdev->dev, |
| "FTL rebuild in progress. Polling for completion.\n"); |
| |
| start = jiffies; |
| timeout = jiffies + msecs_to_jiffies(MTIP_FTL_REBUILD_TIMEOUT_MS); |
| |
| do { |
| if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, |
| &dd->dd_flag))) |
| return -EFAULT; |
| if (mtip_check_surprise_removal(dd->pdev)) |
| return -EFAULT; |
| |
| if (mtip_get_identify(dd->port, NULL) < 0) |
| return -EFAULT; |
| |
| if (*(dd->port->identify + MTIP_FTL_REBUILD_OFFSET) == |
| MTIP_FTL_REBUILD_MAGIC) { |
| ssleep(1); |
| /* Print message every 3 minutes */ |
| if (cnt++ >= 180) { |
| dev_warn(&dd->pdev->dev, |
| "FTL rebuild in progress (%d secs).\n", |
| jiffies_to_msecs(jiffies - start) / 1000); |
| cnt = 0; |
| } |
| } else { |
| dev_warn(&dd->pdev->dev, |
| "FTL rebuild complete (%d secs).\n", |
| jiffies_to_msecs(jiffies - start) / 1000); |
| mtip_block_initialize(dd); |
| return 0; |
| } |
| } while (time_before(jiffies, timeout)); |
| |
| /* Check for timeout */ |
| dev_err(&dd->pdev->dev, |
| "Timed out waiting for FTL rebuild to complete (%d secs).\n", |
| jiffies_to_msecs(jiffies - start) / 1000); |
| return -EFAULT; |
| } |
| |
| static void mtip_softirq_done_fn(struct request *rq) |
| { |
| struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq); |
| struct driver_data *dd = rq->q->queuedata; |
| |
| /* Unmap the DMA scatter list entries */ |
| dma_unmap_sg(&dd->pdev->dev, cmd->sg, cmd->scatter_ents, |
| cmd->direction); |
| |
| if (unlikely(cmd->unaligned)) |
| atomic_inc(&dd->port->cmd_slot_unal); |
| |
| blk_mq_end_request(rq, cmd->status); |
| } |
| |
| static bool mtip_abort_cmd(struct request *req, void *data, bool reserved) |
| { |
| struct mtip_cmd *cmd = blk_mq_rq_to_pdu(req); |
| struct driver_data *dd = data; |
| |
| dbg_printk(MTIP_DRV_NAME " Aborting request, tag = %d\n", req->tag); |
| |
| clear_bit(req->tag, dd->port->cmds_to_issue); |
| cmd->status = BLK_STS_IOERR; |
| mtip_softirq_done_fn(req); |
| return true; |
| } |
| |
| static bool mtip_queue_cmd(struct request *req, void *data, bool reserved) |
| { |
| struct driver_data *dd = data; |
| |
| set_bit(req->tag, dd->port->cmds_to_issue); |
| blk_abort_request(req); |
| return true; |
| } |
| |
| /* |
| * service thread to issue queued commands |
| * |
| * @data Pointer to the driver data structure. |
| * |
| * return value |
| * 0 |
| */ |
| |
| static int mtip_service_thread(void *data) |
| { |
| struct driver_data *dd = (struct driver_data *)data; |
| unsigned long slot, slot_start, slot_wrap, to; |
| unsigned int num_cmd_slots = dd->slot_groups * 32; |
| struct mtip_port *port = dd->port; |
| |
| while (1) { |
| if (kthread_should_stop() || |
| test_bit(MTIP_PF_SVC_THD_STOP_BIT, &port->flags)) |
| goto st_out; |
| clear_bit(MTIP_PF_SVC_THD_ACTIVE_BIT, &port->flags); |
| |
| /* |
| * the condition is to check neither an internal command is |
| * is in progress nor error handling is active |
| */ |
| wait_event_interruptible(port->svc_wait, (port->flags) && |
| (port->flags & MTIP_PF_SVC_THD_WORK)); |
| |
| if (kthread_should_stop() || |
| test_bit(MTIP_PF_SVC_THD_STOP_BIT, &port->flags)) |
| goto st_out; |
| |
| if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, |
| &dd->dd_flag))) |
| goto st_out; |
| |
| set_bit(MTIP_PF_SVC_THD_ACTIVE_BIT, &port->flags); |
| |
| restart_eh: |
| /* Demux bits: start with error handling */ |
| if (test_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags)) { |
| mtip_handle_tfe(dd); |
| clear_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags); |
| } |
| |
| if (test_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags)) |
| goto restart_eh; |
| |
| if (test_bit(MTIP_PF_TO_ACTIVE_BIT, &port->flags)) { |
| to = jiffies + msecs_to_jiffies(5000); |
| |
| do { |
| mdelay(100); |
| } while (atomic_read(&dd->irq_workers_active) != 0 && |
| time_before(jiffies, to)); |
| |
| if (atomic_read(&dd->irq_workers_active) != 0) |
| dev_warn(&dd->pdev->dev, |
| "Completion workers still active!"); |
| |
| blk_mq_quiesce_queue(dd->queue); |
| |
| blk_mq_tagset_busy_iter(&dd->tags, mtip_queue_cmd, dd); |
| |
| set_bit(MTIP_PF_ISSUE_CMDS_BIT, &dd->port->flags); |
| |
| if (mtip_device_reset(dd)) |
| blk_mq_tagset_busy_iter(&dd->tags, |
| mtip_abort_cmd, dd); |
| |
| clear_bit(MTIP_PF_TO_ACTIVE_BIT, &dd->port->flags); |
| |
| blk_mq_unquiesce_queue(dd->queue); |
| } |
| |
| if (test_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags)) { |
| slot = 1; |
| /* used to restrict the loop to one iteration */ |
| slot_start = num_cmd_slots; |
| slot_wrap = 0; |
| while (1) { |
| slot = find_next_bit(port->cmds_to_issue, |
| num_cmd_slots, slot); |
| if (slot_wrap == 1) { |
| if ((slot_start >= slot) || |
| (slot >= num_cmd_slots)) |
| break; |
| } |
| if (unlikely(slot_start == num_cmd_slots)) |
| slot_start = slot; |
| |
| if (unlikely(slot == num_cmd_slots)) { |
| slot = 1; |
| slot_wrap = 1; |
| continue; |
| } |
| |
| /* Issue the command to the hardware */ |
| mtip_issue_ncq_command(port, slot); |
| |
| clear_bit(slot, port->cmds_to_issue); |
| } |
| |
| clear_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags); |
| } |
| |
| if (test_bit(MTIP_PF_REBUILD_BIT, &port->flags)) { |
| if (mtip_ftl_rebuild_poll(dd) == 0) |
| clear_bit(MTIP_PF_REBUILD_BIT, &port->flags); |
| } |
| } |
| |
| st_out: |
| return 0; |
| } |
| |
| /* |
| * DMA region teardown |
| * |
| * @dd Pointer to driver_data structure |
| * |
| * return value |
| * None |
| */ |
| static void mtip_dma_free(struct driver_data *dd) |
| { |
| struct mtip_port *port = dd->port; |
| |
| if (port->block1) |
| dma_free_coherent(&dd->pdev->dev, BLOCK_DMA_ALLOC_SZ, |
| port->block1, port->block1_dma); |
| |
| if (port->command_list) { |
| dma_free_coherent(&dd->pdev->dev, AHCI_CMD_TBL_SZ, |
| port->command_list, port->command_list_dma); |
| } |
| } |
| |
| /* |
| * DMA region setup |
| * |
| * @dd Pointer to driver_data structure |
| * |
| * return value |
| * -ENOMEM Not enough free DMA region space to initialize driver |
| */ |
| static int mtip_dma_alloc(struct driver_data *dd) |
| { |
| struct mtip_port *port = dd->port; |
| |
| /* Allocate dma memory for RX Fis, Identify, and Sector Bufffer */ |
| port->block1 = |
| dma_alloc_coherent(&dd->pdev->dev, BLOCK_DMA_ALLOC_SZ, |
| &port->block1_dma, GFP_KERNEL); |
| if (!port->block1) |
| return -ENOMEM; |
| memset(port->block1, 0, BLOCK_DMA_ALLOC_SZ); |
| |
| /* Allocate dma memory for command list */ |
| port->command_list = |
| dma_alloc_coherent(&dd->pdev->dev, AHCI_CMD_TBL_SZ, |
| &port->command_list_dma, GFP_KERNEL); |
| if (!port->command_list) { |
| dma_free_coherent(&dd->pdev->dev, BLOCK_DMA_ALLOC_SZ, |
| port->block1, port->block1_dma); |
| port->block1 = NULL; |
| port->block1_dma = 0; |
| return -ENOMEM; |
| } |
| memset(port->command_list, 0, AHCI_CMD_TBL_SZ); |
| |
| /* Setup all pointers into first DMA region */ |
| port->rxfis = port->block1 + AHCI_RX_FIS_OFFSET; |
| port->rxfis_dma = port->block1_dma + AHCI_RX_FIS_OFFSET; |
| port->identify = port->block1 + AHCI_IDFY_OFFSET; |
| port->identify_dma = port->block1_dma + AHCI_IDFY_OFFSET; |
| port->log_buf = port->block1 + AHCI_SECTBUF_OFFSET; |
| port->log_buf_dma = port->block1_dma + AHCI_SECTBUF_OFFSET; |
| port->smart_buf = port->block1 + AHCI_SMARTBUF_OFFSET; |
| port->smart_buf_dma = port->block1_dma + AHCI_SMARTBUF_OFFSET; |
| |
| return 0; |
| } |
| |
| static int mtip_hw_get_identify(struct driver_data *dd) |
| { |
| struct smart_attr attr242; |
| unsigned char *buf; |
| int rv; |
| |
| if (mtip_get_identify(dd->port, NULL) < 0) |
| return -EFAULT; |
| |
| if (*(dd->port->identify + MTIP_FTL_REBUILD_OFFSET) == |
| MTIP_FTL_REBUILD_MAGIC) { |
| set_bit(MTIP_PF_REBUILD_BIT, &dd->port->flags); |
| return MTIP_FTL_REBUILD_MAGIC; |
| } |
| mtip_dump_identify(dd->port); |
| |
| /* check write protect, over temp and rebuild statuses */ |
| rv = mtip_read_log_page(dd->port, ATA_LOG_SATA_NCQ, |
| dd->port->log_buf, |
| dd->port->log_buf_dma, 1); |
| if (rv) { |
| dev_warn(&dd->pdev->dev, |
| "Error in READ LOG EXT (10h) command\n"); |
| /* non-critical error, don't fail the load */ |
| } else { |
| buf = (unsigned char *)dd->port->log_buf; |
| if (buf[259] & 0x1) { |
| dev_info(&dd->pdev->dev, |
| "Write protect bit is set.\n"); |
| set_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag); |
| } |
| if (buf[288] == 0xF7) { |
| dev_info(&dd->pdev->dev, |
| "Exceeded Tmax, drive in thermal shutdown.\n"); |
| set_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag); |
| } |
| if (buf[288] == 0xBF) { |
| dev_info(&dd->pdev->dev, |
| "Drive indicates rebuild has failed.\n"); |
| set_bit(MTIP_DDF_REBUILD_FAILED_BIT, &dd->dd_flag); |
| } |
| } |
| |
| /* get write protect progess */ |
| memset(&attr242, 0, sizeof(struct smart_attr)); |
| if (mtip_get_smart_attr(dd->port, 242, &attr242)) |
| dev_warn(&dd->pdev->dev, |
| "Unable to check write protect progress\n"); |
| else |
| dev_info(&dd->pdev->dev, |
| "Write protect progress: %u%% (%u blocks)\n", |
| attr242.cur, le32_to_cpu(attr242.data)); |
| |
| return rv; |
| } |
| |
| /* |
| * Called once for each card. |
| * |
| * @dd Pointer to the driver data structure. |
| * |
| * return value |
| * 0 on success, else an error code. |
| */ |
| static int mtip_hw_init(struct driver_data *dd) |
| { |
| int i; |
| int rv; |
| unsigned long timeout, timetaken; |
| |
| dd->mmio = pcim_iomap_table(dd->pdev)[MTIP_ABAR]; |
| |
| mtip_detect_product(dd); |
| if (dd->product_type == MTIP_PRODUCT_UNKNOWN) { |
| rv = -EIO; |
| goto out1; |
| } |
| |
| hba_setup(dd); |
| |
| dd->port = kzalloc_node(sizeof(struct mtip_port), GFP_KERNEL, |
| dd->numa_node); |
| if (!dd->port) { |
| dev_err(&dd->pdev->dev, |
| "Memory allocation: port structure\n"); |
| return -ENOMEM; |
| } |
| |
| /* Continue workqueue setup */ |
| for (i = 0; i < MTIP_MAX_SLOT_GROUPS; i++) |
| dd->work[i].port = dd->port; |
| |
| /* Enable unaligned IO constraints for some devices */ |
| if (mtip_device_unaligned_constrained(dd)) |
| dd->unal_qdepth = MTIP_MAX_UNALIGNED_SLOTS; |
| else |
| dd->unal_qdepth = 0; |
| |
| atomic_set(&dd->port->cmd_slot_unal, dd->unal_qdepth); |
| |
| /* Spinlock to prevent concurrent issue */ |
| for (i = 0; i < MTIP_MAX_SLOT_GROUPS; i++) |
| spin_lock_init(&dd->port->cmd_issue_lock[i]); |
| |
| /* Set the port mmio base address. */ |
| dd->port->mmio = dd->mmio + PORT_OFFSET; |
| dd->port->dd = dd; |
| |
| /* DMA allocations */ |
| rv = mtip_dma_alloc(dd); |
| if (rv < 0) |
| goto out1; |
| |
| /* Setup the pointers to the extended s_active and CI registers. */ |
| for (i = 0; i < dd->slot_groups; i++) { |
| dd->port->s_active[i] = |
| dd->port->mmio + i*0x80 + PORT_SCR_ACT; |
| dd->port->cmd_issue[i] = |
| dd->port->mmio + i*0x80 + PORT_COMMAND_ISSUE; |
| dd->port->completed[i] = |
| dd->port->mmio + i*0x80 + PORT_SDBV; |
| } |
| |
| timetaken = jiffies; |
| timeout = jiffies + msecs_to_jiffies(30000); |
| while (((readl(dd->port->mmio + PORT_SCR_STAT) & 0x0F) != 0x03) && |
| time_before(jiffies, timeout)) { |
| mdelay(100); |
| } |
| if (unlikely(mtip_check_surprise_removal(dd->pdev))) { |
| timetaken = jiffies - timetaken; |
| dev_warn(&dd->pdev->dev, |
| "Surprise removal detected at %u ms\n", |
| jiffies_to_msecs(timetaken)); |
| rv = -ENODEV; |
| goto out2 ; |
| } |
| if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))) { |
| timetaken = jiffies - timetaken; |
| dev_warn(&dd->pdev->dev, |
| "Removal detected at %u ms\n", |
| jiffies_to_msecs(timetaken)); |
| rv = -EFAULT; |
| goto out2; |
| } |
| |
| /* Conditionally reset the HBA. */ |
| if (!(readl(dd->mmio + HOST_CAP) & HOST_CAP_NZDMA)) { |
| if (mtip_hba_reset(dd) < 0) { |
| dev_err(&dd->pdev->dev, |
| "Card did not reset within timeout\n"); |
| rv = -EIO; |
| goto out2; |
| } |
| } else { |
| /* Clear any pending interrupts on the HBA */ |
| writel(readl(dd->mmio + HOST_IRQ_STAT), |
| dd->mmio + HOST_IRQ_STAT); |
| } |
| |
| mtip_init_port(dd->port); |
| mtip_start_port(dd->port); |
| |
| /* Setup the ISR and enable interrupts. */ |
| rv = request_irq(dd->pdev->irq, mtip_irq_handler, IRQF_SHARED, |
| dev_driver_string(&dd->pdev->dev), dd); |
| if (rv) { |
| dev_err(&dd->pdev->dev, |
| "Unable to allocate IRQ %d\n", dd->pdev->irq); |
| goto out2; |
| } |
| irq_set_affinity_hint(dd->pdev->irq, get_cpu_mask(dd->isr_binding)); |
| |
| /* Enable interrupts on the HBA. */ |
| writel(readl(dd->mmio + HOST_CTL) | HOST_IRQ_EN, |
| dd->mmio + HOST_CTL); |
| |
| init_waitqueue_head(&dd->port->svc_wait); |
| |
| if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) { |
| rv = -EFAULT; |
| goto out3; |
| } |
| |
| return rv; |
| |
| out3: |
| /* Disable interrupts on the HBA. */ |
| writel(readl(dd->mmio + HOST_CTL) & ~HOST_IRQ_EN, |
| dd->mmio + HOST_CTL); |
| |
| /* Release the IRQ. */ |
| irq_set_affinity_hint(dd->pdev->irq, NULL); |
| free_irq(dd->pdev->irq, dd); |
| |
| out2: |
| mtip_deinit_port(dd->port); |
| mtip_dma_free(dd); |
| |
| out1: |
| /* Free the memory allocated for the for structure. */ |
| kfree(dd->port); |
| |
| return rv; |
| } |
| |
| static int mtip_standby_drive(struct driver_data *dd) |
| { |
| int rv = 0; |
| |
| if (dd->sr || !dd->port) |
| return -ENODEV; |
| /* |
| * Send standby immediate (E0h) to the drive so that it |
| * saves its state. |
| */ |
| if (!test_bit(MTIP_PF_REBUILD_BIT, &dd->port->flags) && |
| !test_bit(MTIP_DDF_REBUILD_FAILED_BIT, &dd->dd_flag) && |
| !test_bit(MTIP_DDF_SEC_LOCK_BIT, &dd->dd_flag)) { |
| rv = mtip_standby_immediate(dd->port); |
| if (rv) |
| dev_warn(&dd->pdev->dev, |
| "STANDBY IMMEDIATE failed\n"); |
| } |
| return rv; |
| } |
| |
| /* |
| * Called to deinitialize an interface. |
| * |
| * @dd Pointer to the driver data structure. |
| * |
| * return value |
| * 0 |
| */ |
| static int mtip_hw_exit(struct driver_data *dd) |
| { |
| if (!dd->sr) { |
| /* de-initialize the port. */ |
| mtip_deinit_port(dd->port); |
| |
| /* Disable interrupts on the HBA. */ |
| writel(readl(dd->mmio + HOST_CTL) & ~HOST_IRQ_EN, |
| dd->mmio + HOST_CTL); |
| } |
| |
| /* Release the IRQ. */ |
| irq_set_affinity_hint(dd->pdev->irq, NULL); |
| free_irq(dd->pdev->irq, dd); |
| msleep(1000); |
| |
| /* Free dma regions */ |
| mtip_dma_free(dd); |
| |
| /* Free the memory allocated for the for structure. */ |
| kfree(dd->port); |
| dd->port = NULL; |
| |
| return 0; |
| } |
| |
| /* |
| * Issue a Standby Immediate command to the device. |
| * |
| * This function is called by the Block Layer just before the |
| * system powers off during a shutdown. |
| * |
| * @dd Pointer to the driver data structure. |
| * |
| * return value |
| * 0 |
| */ |
| static int mtip_hw_shutdown(struct driver_data *dd) |
| { |
| /* |
| * Send standby immediate (E0h) to the drive so that it |
| * saves its state. |
| */ |
| mtip_standby_drive(dd); |
| |
| return 0; |
| } |
| |
| /* |
| * Suspend function |
| * |
| * This function is called by the Block Layer just before the |
| * system hibernates. |
| * |
| * @dd Pointer to the driver data structure. |
| * |
| * return value |
| * 0 Suspend was successful |
| * -EFAULT Suspend was not successful |
| */ |
| static int mtip_hw_suspend(struct driver_data *dd) |
| { |
| /* |
| * Send standby immediate (E0h) to the drive |
| * so that it saves its state. |
| */ |
| if (mtip_standby_drive(dd) != 0) { |
| dev_err(&dd->pdev->dev, |
| "Failed standby-immediate command\n"); |
| return -EFAULT; |
| } |
| |
| /* Disable interrupts on the HBA.*/ |
| writel(readl(dd->mmio + HOST_CTL) & ~HOST_IRQ_EN, |
| dd->mmio + HOST_CTL); |
| mtip_deinit_port(dd->port); |
| |
| return 0; |
| } |
| |
| /* |
| * Resume function |
| * |
| * This function is called by the Block Layer as the |
| * system resumes. |
| * |
| * @dd Pointer to the driver data structure. |
| * |
| * return value |
| * 0 Resume was successful |
| * -EFAULT Resume was not successful |
| */ |
| static int mtip_hw_resume(struct driver_data *dd) |
| { |
| /* Perform any needed hardware setup steps */ |
| hba_setup(dd); |
| |
| /* Reset the HBA */ |
| if (mtip_hba_reset(dd) != 0) { |
| dev_err(&dd->pdev->dev, |
| "Unable to reset the HBA\n"); |
| return -EFAULT; |
| } |
| |
| /* |
| * Enable the port, DMA engine, and FIS reception specific |
| * h/w in controller. |
| */ |
| mtip_init_port(dd->port); |
| mtip_start_port(dd->port); |
| |
| /* Enable interrupts on the HBA.*/ |
| writel(readl(dd->mmio + HOST_CTL) | HOST_IRQ_EN, |
| dd->mmio + HOST_CTL); |
| |
| return 0; |
| } |
| |
| /* |
| * Helper function for reusing disk name |
| * upon hot insertion. |
| */ |
| static int rssd_disk_name_format(char *prefix, |
| int index, |
| char *buf, |
| int buflen) |
| { |
| const int base = 'z' - 'a' + 1; |
| char *begin = buf + strlen(prefix); |
| char *end = buf + buflen; |
| char *p; |
| int unit; |
| |
| p = end - 1; |
| *p = '\0'; |
| unit = base; |
| do { |
| if (p == begin) |
| return -EINVAL; |
| *--p = 'a' + (index % unit); |
| index = (index / unit) - 1; |
| } while (index >= 0); |
| |
| memmove(begin, p, end - p); |
| memcpy(buf, prefix, strlen(prefix)); |
| |
| return 0; |
| } |
| |
| /* |
| * Block layer IOCTL handler. |
| * |
| * @dev Pointer to the block_device structure. |
| * @mode ignored |
| * @cmd IOCTL command passed from the user application. |
| * @arg Argument passed from the user application. |
| * |
| * return value |
| * 0 IOCTL completed successfully. |
| * -ENOTTY IOCTL not supported or invalid driver data |
| * structure pointer. |
| */ |
| static int mtip_block_ioctl(struct block_device *dev, |
| fmode_t mode, |
| unsigned cmd, |
| unsigned long arg) |
| { |
| struct driver_data *dd = dev->bd_disk->private_data; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| |
| if (!dd) |
| return -ENOTTY; |
| |
| if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))) |
| return -ENOTTY; |
| |
| switch (cmd) { |
| case BLKFLSBUF: |
| return -ENOTTY; |
| default: |
| return mtip_hw_ioctl(dd, cmd, arg); |
| } |
| } |
| |
| #ifdef CONFIG_COMPAT |
| /* |
| * Block layer compat IOCTL handler. |
| * |
| * @dev Pointer to the block_device structure. |
| * @mode ignored |
| * @cmd IOCTL command passed from the user application. |
| * @arg Argument passed from the user application. |
| * |
| * return value |
| * 0 IOCTL completed successfully. |
| * -ENOTTY IOCTL not supported or invalid driver data |
| * structure pointer. |
| */ |
| static int mtip_block_compat_ioctl(struct block_device *dev, |
| fmode_t mode, |
| unsigned cmd, |
| unsigned long arg) |
| { |
| struct driver_data *dd = dev->bd_disk->private_data; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| |
| if (!dd) |
| return -ENOTTY; |
| |
| if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))) |
| return -ENOTTY; |
| |
| switch (cmd) { |
| case BLKFLSBUF: |
| return -ENOTTY; |
| case HDIO_DRIVE_TASKFILE: { |
| struct mtip_compat_ide_task_request_s __user *compat_req_task; |
| ide_task_request_t req_task; |
| int compat_tasksize, outtotal, ret; |
| |
| compat_tasksize = |
| sizeof(struct mtip_compat_ide_task_request_s); |
| |
| compat_req_task = |
| (struct mtip_compat_ide_task_request_s __user *) arg; |
| |
| if (copy_from_user(&req_task, (void __user *) arg, |
| compat_tasksize - (2 * sizeof(compat_long_t)))) |
| return -EFAULT; |
| |
| if (get_user(req_task.out_size, &compat_req_task->out_size)) |
| return -EFAULT; |
| |
| if (get_user(req_task.in_size, &compat_req_task->in_size)) |
| return -EFAULT; |
| |
| outtotal = sizeof(struct mtip_compat_ide_task_request_s); |
| |
| ret = exec_drive_taskfile(dd, (void __user *) arg, |
| &req_task, outtotal); |
| |
| if (copy_to_user((void __user *) arg, &req_task, |
| compat_tasksize - |
| (2 * sizeof(compat_long_t)))) |
| return -EFAULT; |
| |
| if (put_user(req_task.out_size, &compat_req_task->out_size)) |
| return -EFAULT; |
| |
| if (put_user(req_task.in_size, &compat_req_task->in_size)) |
| return -EFAULT; |
| |
| return ret; |
| } |
| default: |
| return mtip_hw_ioctl(dd, cmd, arg); |
| } |
| } |
| #endif |
| |
| /* |
| * Obtain the geometry of the device. |
| * |
| * You may think that this function is obsolete, but some applications, |
| * fdisk for example still used CHS values. This function describes the |
| * device as having 224 heads and 56 sectors per cylinder. These values are |
| * chosen so that each cylinder is aligned on a 4KB boundary. Since a |
| * partition is described in terms of a start and end cylinder this means |
| * that each partition is also 4KB aligned. Non-aligned partitions adversely |
| * affects performance. |
| * |
| * @dev Pointer to the block_device strucutre. |
| * @geo Pointer to a hd_geometry structure. |
| * |
| * return value |
| * 0 Operation completed successfully. |
| * -ENOTTY An error occurred while reading the drive capacity. |
| */ |
| static int mtip_block_getgeo(struct block_device *dev, |
| struct hd_geometry *geo) |
| { |
| struct driver_data *dd = dev->bd_disk->private_data; |
| sector_t capacity; |
| |
| if (!dd) |
| return -ENOTTY; |
| |
| if (!(mtip_hw_get_capacity(dd, &capacity))) { |
| dev_warn(&dd->pdev->dev, |
| "Could not get drive capacity.\n"); |
| return -ENOTTY; |
| } |
| |
| geo->heads = 224; |
| geo->sectors = 56; |
| sector_div(capacity, (geo->heads * geo->sectors)); |
| geo->cylinders = capacity; |
| return 0; |
| } |
| |
| static int mtip_block_open(struct block_device *dev, fmode_t mode) |
| { |
| struct driver_data *dd; |
| |
| if (dev && dev->bd_disk) { |
| dd = (struct driver_data *) dev->bd_disk->private_data; |
| |
| if (dd) { |
| if (test_bit(MTIP_DDF_REMOVAL_BIT, |
| &dd->dd_flag)) { |
| return -ENODEV; |
| } |
| return 0; |
| } |
| } |
| return -ENODEV; |
| } |
| |
| static void mtip_block_release(struct gendisk *disk, fmode_t mode) |
| { |
| } |
| |
| /* |
| * Block device operation function. |
| * |
| * This structure contains pointers to the functions required by the block |
| * layer. |
| */ |
| static const struct block_device_operations mtip_block_ops = { |
| .open = mtip_block_open, |
| .release = mtip_block_release, |
| .ioctl = mtip_block_ioctl, |
| #ifdef CONFIG_COMPAT |
| .compat_ioctl = mtip_block_compat_ioctl, |
| #endif |
| .getgeo = mtip_block_getgeo, |
| .owner = THIS_MODULE |
| }; |
| |
| static inline bool is_se_active(struct driver_data *dd) |
| { |
| if (unlikely(test_bit(MTIP_PF_SE_ACTIVE_BIT, &dd->port->flags))) { |
| if (dd->port->ic_pause_timer) { |
| unsigned long to = dd->port->ic_pause_timer + |
| msecs_to_jiffies(1000); |
| if (time_after(jiffies, to)) { |
| clear_bit(MTIP_PF_SE_ACTIVE_BIT, |
| &dd->port->flags); |
| clear_bit(MTIP_DDF_SEC_LOCK_BIT, &dd->dd_flag); |
| dd->port->ic_pause_timer = 0; |
| wake_up_interruptible(&dd->port->svc_wait); |
| return false; |
| } |
| } |
| return true; |
| } |
| return false; |
| } |
| |
| static inline bool is_stopped(struct driver_data *dd, struct request *rq) |
| { |
| if (likely(!(dd->dd_flag & MTIP_DDF_STOP_IO))) |
| return false; |
| |
| if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) |
| return true; |
| if (test_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag)) |
| return true; |
| if (test_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag) && |
| rq_data_dir(rq)) |
| return true; |
| if (test_bit(MTIP_DDF_SEC_LOCK_BIT, &dd->dd_flag)) |
| return true; |
| if (test_bit(MTIP_DDF_REBUILD_FAILED_BIT, &dd->dd_flag)) |
| return true; |
| |
| return false; |
| } |
| |
| static bool mtip_check_unal_depth(struct blk_mq_hw_ctx *hctx, |
| struct request *rq) |
| { |
| struct driver_data *dd = hctx->queue->queuedata; |
| struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq); |
| |
| if (rq_data_dir(rq) == READ || !dd->unal_qdepth) |
| return false; |
| |
| /* |
| * If unaligned depth must be limited on this controller, mark it |
| * as unaligned if the IO isn't on a 4k boundary (start of length). |
| */ |
| if (blk_rq_sectors(rq) <= 64) { |
| if ((blk_rq_pos(rq) & 7) || (blk_rq_sectors(rq) & 7)) |
| cmd->unaligned = 1; |
| } |
| |
| if (cmd->unaligned && atomic_dec_if_positive(&dd->port->cmd_slot_unal) >= 0) |
| return true; |
| |
| return false; |
| } |
| |
| static blk_status_t mtip_issue_reserved_cmd(struct blk_mq_hw_ctx *hctx, |
| struct request *rq) |
| { |
| struct driver_data *dd = hctx->queue->queuedata; |
| struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq); |
| struct mtip_int_cmd *icmd = cmd->icmd; |
| struct mtip_cmd_hdr *hdr = |
| dd->port->command_list + sizeof(struct mtip_cmd_hdr) * rq->tag; |
| struct mtip_cmd_sg *command_sg; |
| |
| if (mtip_commands_active(dd->port)) |
| return BLK_STS_DEV_RESOURCE; |
| |
| hdr->ctba = cpu_to_le32(cmd->command_dma & 0xFFFFFFFF); |
| if (test_bit(MTIP_PF_HOST_CAP_64, &dd->port->flags)) |
| hdr->ctbau = cpu_to_le32((cmd->command_dma >> 16) >> 16); |
| /* Populate the SG list */ |
| hdr->opts = cpu_to_le32(icmd->opts | icmd->fis_len); |
| if (icmd->buf_len) { |
| command_sg = cmd->command + AHCI_CMD_TBL_HDR_SZ; |
| |
| command_sg->info = cpu_to_le32((icmd->buf_len-1) & 0x3FFFFF); |
| command_sg->dba = cpu_to_le32(icmd->buffer & 0xFFFFFFFF); |
| command_sg->dba_upper = |
| cpu_to_le32((icmd->buffer >> 16) >> 16); |
| |
| hdr->opts |= cpu_to_le32((1 << 16)); |
| } |
| |
| /* Populate the command header */ |
| hdr->byte_count = 0; |
| |
| blk_mq_start_request(rq); |
| mtip_issue_non_ncq_command(dd->port, rq->tag); |
| return 0; |
| } |
| |
| static blk_status_t mtip_queue_rq(struct blk_mq_hw_ctx *hctx, |
| const struct blk_mq_queue_data *bd) |
| { |
| struct driver_data *dd = hctx->queue->queuedata; |
| struct request *rq = bd->rq; |
| struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq); |
| |
| if (blk_rq_is_passthrough(rq)) |
| return mtip_issue_reserved_cmd(hctx, rq); |
| |
| if (unlikely(mtip_check_unal_depth(hctx, rq))) |
| return BLK_STS_DEV_RESOURCE; |
| |
| if (is_se_active(dd) || is_stopped(dd, rq)) |
| return BLK_STS_IOERR; |
| |
| blk_mq_start_request(rq); |
| |
| if (req_op(rq) == REQ_OP_DISCARD) |
| return mtip_send_trim(dd, blk_rq_pos(rq), blk_rq_sectors(rq)); |
| mtip_hw_submit_io(dd, rq, cmd, hctx); |
| return BLK_STS_OK; |
| } |
| |
| static void mtip_free_cmd(struct blk_mq_tag_set *set, struct request *rq, |
| unsigned int hctx_idx) |
| { |
| struct driver_data *dd = set->driver_data; |
| struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq); |
| |
| if (!cmd->command) |
| return; |
| |
| dma_free_coherent(&dd->pdev->dev, CMD_DMA_ALLOC_SZ, cmd->command, |
| cmd->command_dma); |
| } |
| |
| static int mtip_init_cmd(struct blk_mq_tag_set *set, struct request *rq, |
| unsigned int hctx_idx, unsigned int numa_node) |
| { |
| struct driver_data *dd = set->driver_data; |
| struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq); |
| |
| cmd->command = dma_alloc_coherent(&dd->pdev->dev, CMD_DMA_ALLOC_SZ, |
| &cmd->command_dma, GFP_KERNEL); |
| if (!cmd->command) |
| return -ENOMEM; |
| |
| memset(cmd->command, 0, CMD_DMA_ALLOC_SZ); |
| |
| sg_init_table(cmd->sg, MTIP_MAX_SG); |
| return 0; |
| } |
| |
| static enum blk_eh_timer_return mtip_cmd_timeout(struct request *req, |
| bool reserved) |
| { |
| struct driver_data *dd = req->q->queuedata; |
| |
| if (reserved) { |
| struct mtip_cmd *cmd = blk_mq_rq_to_pdu(req); |
| |
| cmd->status = BLK_STS_TIMEOUT; |
| blk_mq_complete_request(req); |
| return BLK_EH_DONE; |
| } |
| |
| if (test_bit(req->tag, dd->port->cmds_to_issue)) |
| goto exit_handler; |
| |
| if (test_and_set_bit(MTIP_PF_TO_ACTIVE_BIT, &dd->port->flags)) |
| goto exit_handler; |
| |
| wake_up_interruptible(&dd->port->svc_wait); |
| exit_handler: |
| return BLK_EH_RESET_TIMER; |
| } |
| |
| static const struct blk_mq_ops mtip_mq_ops = { |
| .queue_rq = mtip_queue_rq, |
| .init_request = mtip_init_cmd, |
| .exit_request = mtip_free_cmd, |
| .complete = mtip_softirq_done_fn, |
| .timeout = mtip_cmd_timeout, |
| }; |
| |
| /* |
| * Block layer initialization function. |
| * |
| * This function is called once by the PCI layer for each P320 |
| * device that is connected to the system. |
| * |
| * @dd Pointer to the driver data structure. |
| * |
| * return value |
| * 0 on success else an error code. |
| */ |
| static int mtip_block_initialize(struct driver_data *dd) |
| { |
| int rv = 0, wait_for_rebuild = 0; |
| sector_t capacity; |
| unsigned int index = 0; |
| struct kobject *kobj; |
| |
| if (dd->disk) |
| goto skip_create_disk; /* hw init done, before rebuild */ |
| |
| if (mtip_hw_init(dd)) { |
| rv = -EINVAL; |
| goto protocol_init_error; |
| } |
| |
| dd->disk = alloc_disk_node(MTIP_MAX_MINORS, dd->numa_node); |
| if (dd->disk == NULL) { |
| dev_err(&dd->pdev->dev, |
| "Unable to allocate gendisk structure\n"); |
| rv = -EINVAL; |
| goto alloc_disk_error; |
| } |
| |
| rv = ida_alloc(&rssd_index_ida, GFP_KERNEL); |
| if (rv < 0) |
| goto ida_get_error; |
| index = rv; |
| |
| rv = rssd_disk_name_format("rssd", |
| index, |
| dd->disk->disk_name, |
| DISK_NAME_LEN); |
| if (rv) |
| goto disk_index_error; |
| |
| dd->disk->major = dd->major; |
| dd->disk->first_minor = index * MTIP_MAX_MINORS; |
| dd->disk->minors = MTIP_MAX_MINORS; |
| dd->disk->fops = &mtip_block_ops; |
| dd->disk->private_data = dd; |
| dd->index = index; |
| |
| mtip_hw_debugfs_init(dd); |
| |
| memset(&dd->tags, 0, sizeof(dd->tags)); |
| dd->tags.ops = &mtip_mq_ops; |
| dd->tags.nr_hw_queues = 1; |
| dd->tags.queue_depth = MTIP_MAX_COMMAND_SLOTS; |
| dd->tags.reserved_tags = 1; |
| dd->tags.cmd_size = sizeof(struct mtip_cmd); |
| dd->tags.numa_node = dd->numa_node; |
| dd->tags.flags = BLK_MQ_F_SHOULD_MERGE; |
| dd->tags.driver_data = dd; |
| dd->tags.timeout = MTIP_NCQ_CMD_TIMEOUT_MS; |
| |
| rv = blk_mq_alloc_tag_set(&dd->tags); |
| if (rv) { |
| dev_err(&dd->pdev->dev, |
| "Unable to allocate request queue\n"); |
| goto block_queue_alloc_tag_error; |
| } |
| |
| /* Allocate the request queue. */ |
| dd->queue = blk_mq_init_queue(&dd->tags); |
| if (IS_ERR(dd->queue)) { |
| dev_err(&dd->pdev->dev, |
| "Unable to allocate request queue\n"); |
| rv = -ENOMEM; |
| goto block_queue_alloc_init_error; |
| } |
| |
| dd->disk->queue = dd->queue; |
| dd->queue->queuedata = dd; |
| |
| skip_create_disk: |
| /* Initialize the protocol layer. */ |
| wait_for_rebuild = mtip_hw_get_identify(dd); |
| if (wait_for_rebuild < 0) { |
| dev_err(&dd->pdev->dev, |
| "Protocol layer initialization failed\n"); |
| rv = -EINVAL; |
| goto init_hw_cmds_error; |
| } |
| |
| /* |
| * if rebuild pending, start the service thread, and delay the block |
| * queue creation and device_add_disk() |
| */ |
| if (wait_for_rebuild == MTIP_FTL_REBUILD_MAGIC) |
| goto start_service_thread; |
| |
| /* Set device limits. */ |
| blk_queue_flag_set(QUEUE_FLAG_NONROT, dd->queue); |
| blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, dd->queue); |
| blk_queue_max_segments(dd->queue, MTIP_MAX_SG); |
| blk_queue_physical_block_size(dd->queue, 4096); |
| blk_queue_max_hw_sectors(dd->queue, 0xffff); |
| blk_queue_max_segment_size(dd->queue, 0x400000); |
| blk_queue_io_min(dd->queue, 4096); |
| |
| /* Signal trim support */ |
| if (dd->trim_supp == true) { |
| blk_queue_flag_set(QUEUE_FLAG_DISCARD, dd->queue); |
| dd->queue->limits.discard_granularity = 4096; |
| blk_queue_max_discard_sectors(dd->queue, |
| MTIP_MAX_TRIM_ENTRY_LEN * MTIP_MAX_TRIM_ENTRIES); |
| } |
| |
| /* Set the capacity of the device in 512 byte sectors. */ |
| if (!(mtip_hw_get_capacity(dd, &capacity))) { |
| dev_warn(&dd->pdev->dev, |
| "Could not read drive capacity\n"); |
| rv = -EIO; |
| goto read_capacity_error; |
| } |
| set_capacity(dd->disk, capacity); |
| |
| /* Enable the block device and add it to /dev */ |
| device_add_disk(&dd->pdev->dev, dd->disk, NULL); |
| |
| dd->bdev = bdget_disk(dd->disk, 0); |
| /* |
| * Now that the disk is active, initialize any sysfs attributes |
| * managed by the protocol layer. |
| */ |
| kobj = kobject_get(&disk_to_dev(dd->disk)->kobj); |
| if (kobj) { |
| mtip_hw_sysfs_init(dd, kobj); |
| kobject_put(kobj); |
| } |
| |
| if (dd->mtip_svc_handler) { |
| set_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag); |
| return rv; /* service thread created for handling rebuild */ |
| } |
| |
| start_service_thread: |
| dd->mtip_svc_handler = kthread_create_on_node(mtip_service_thread, |
| dd, dd->numa_node, |
| "mtip_svc_thd_%02d", index); |
| |
| if (IS_ERR(dd->mtip_svc_handler)) { |
| dev_err(&dd->pdev->dev, "service thread failed to start\n"); |
| dd->mtip_svc_handler = NULL; |
| rv = -EFAULT; |
| goto kthread_run_error; |
| } |
| wake_up_process(dd->mtip_svc_handler); |
| if (wait_for_rebuild == MTIP_FTL_REBUILD_MAGIC) |
| rv = wait_for_rebuild; |
| |
| return rv; |
| |
| kthread_run_error: |
| bdput(dd->bdev); |
| dd->bdev = NULL; |
| |
| /* Delete our gendisk. This also removes the device from /dev */ |
| del_gendisk(dd->disk); |
| |
| read_capacity_error: |
| init_hw_cmds_error: |
| blk_cleanup_queue(dd->queue); |
| block_queue_alloc_init_error: |
| blk_mq_free_tag_set(&dd->tags); |
| block_queue_alloc_tag_error: |
| mtip_hw_debugfs_exit(dd); |
| disk_index_error: |
| ida_free(&rssd_index_ida, index); |
| |
| ida_get_error: |
| put_disk(dd->disk); |
| |
| alloc_disk_error: |
| mtip_hw_exit(dd); /* De-initialize the protocol layer. */ |
| |
| protocol_init_error: |
| return rv; |
| } |
| |
| static bool mtip_no_dev_cleanup(struct request *rq, void *data, bool reserv) |
| { |
| struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq); |
| |
| cmd->status = BLK_STS_IOERR; |
| blk_mq_complete_request(rq); |
| return true; |
| } |
| |
| /* |
| * Block layer deinitialization function. |
| * |
| * Called by the PCI layer as each P320 device is removed. |
| * |
| * @dd Pointer to the driver data structure. |
| * |
| * return value |
| * 0 |
| */ |
| static int mtip_block_remove(struct driver_data *dd) |
| { |
| struct kobject *kobj; |
| |
| mtip_hw_debugfs_exit(dd); |
| |
| if (dd->mtip_svc_handler) { |
| set_bit(MTIP_PF_SVC_THD_STOP_BIT, &dd->port->flags); |
| wake_up_interruptible(&dd->port->svc_wait); |
| kthread_stop(dd->mtip_svc_handler); |
| } |
| |
| /* Clean up the sysfs attributes, if created */ |
| if (test_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag)) { |
| kobj = kobject_get(&disk_to_dev(dd->disk)->kobj); |
| if (kobj) { |
| mtip_hw_sysfs_exit(dd, kobj); |
| kobject_put(kobj); |
| } |
| } |
| |
| if (!dd->sr) { |
| /* |
| * Explicitly wait here for IOs to quiesce, |
| * as mtip_standby_drive usually won't wait for IOs. |
| */ |
| if (!mtip_quiesce_io(dd->port, MTIP_QUIESCE_IO_TIMEOUT_MS)) |
| mtip_standby_drive(dd); |
| } |
| else |
| dev_info(&dd->pdev->dev, "device %s surprise removal\n", |
| dd->disk->disk_name); |
| |
| blk_freeze_queue_start(dd->queue); |
| blk_mq_quiesce_queue(dd->queue); |
| blk_mq_tagset_busy_iter(&dd->tags, mtip_no_dev_cleanup, dd); |
| blk_mq_unquiesce_queue(dd->queue); |
| |
| /* |
| * Delete our gendisk structure. This also removes the device |
| * from /dev |
| */ |
| if (dd->bdev) { |
| bdput(dd->bdev); |
| dd->bdev = NULL; |
| } |
| if (dd->disk) { |
| if (test_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag)) |
| del_gendisk(dd->disk); |
| if (dd->disk->queue) { |
| blk_cleanup_queue(dd->queue); |
| blk_mq_free_tag_set(&dd->tags); |
| dd->queue = NULL; |
| } |
| put_disk(dd->disk); |
| } |
| dd->disk = NULL; |
| |
| ida_free(&rssd_index_ida, dd->index); |
| |
| /* De-initialize the protocol layer. */ |
| mtip_hw_exit(dd); |
| |
| return 0; |
| } |
| |
| /* |
| * Function called by the PCI layer when just before the |
| * machine shuts down. |
| * |
| * If a protocol layer shutdown function is present it will be called |
| * by this function. |
| * |
| * @dd Pointer to the driver data structure. |
| * |
| * return value |
| * 0 |
| */ |
| static int mtip_block_shutdown(struct driver_data *dd) |
| { |
| mtip_hw_shutdown(dd); |
| |
| /* Delete our gendisk structure, and cleanup the blk queue. */ |
| if (dd->disk) { |
| dev_info(&dd->pdev->dev, |
| "Shutting down %s ...\n", dd->disk->disk_name); |
| |
| if (test_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag)) |
| del_gendisk(dd->disk); |
| if (dd->disk->queue) { |
| blk_cleanup_queue(dd->queue); |
| blk_mq_free_tag_set(&dd->tags); |
| } |
| put_disk(dd->disk); |
| dd->disk = NULL; |
| dd->queue = NULL; |
| } |
| |
| ida_free(&rssd_index_ida, dd->index); |
| return 0; |
| } |
| |
| static int mtip_block_suspend(struct driver_data *dd) |
| { |
| dev_info(&dd->pdev->dev, |
| "Suspending %s ...\n", dd->disk->disk_name); |
| mtip_hw_suspend(dd); |
| return 0; |
| } |
| |
| static int mtip_block_resume(struct driver_data *dd) |
| { |
| dev_info(&dd->pdev->dev, "Resuming %s ...\n", |
| dd->disk->disk_name); |
| mtip_hw_resume(dd); |
| return 0; |
| } |
| |
| static void drop_cpu(int cpu) |
| { |
| cpu_use[cpu]--; |
| } |
| |
| static int get_least_used_cpu_on_node(int node) |
| { |
| int cpu, least_used_cpu, least_cnt; |
| const struct cpumask *node_mask; |
| |
| node_mask = cpumask_of_node(node); |
| least_used_cpu = cpumask_first(node_mask); |
| least_cnt = cpu_use[least_used_cpu]; |
| cpu = least_used_cpu; |
| |
| for_each_cpu(cpu, node_mask) { |
| if (cpu_use[cpu] < least_cnt) { |
| least_used_cpu = cpu; |
| least_cnt = cpu_use[cpu]; |
| } |
| } |
| cpu_use[least_used_cpu]++; |
| return least_used_cpu; |
| } |
| |
| /* Helper for selecting a node in round robin mode */ |
| static inline int mtip_get_next_rr_node(void) |
| { |
| static int next_node = NUMA_NO_NODE; |
| |
| if (next_node == NUMA_NO_NODE) { |
| next_node = first_online_node; |
| return next_node; |
| } |
| |
| next_node = next_online_node(next_node); |
| if (next_node == MAX_NUMNODES) |
| next_node = first_online_node; |
| return next_node; |
| } |
| |
| static DEFINE_HANDLER(0); |
| static DEFINE_HANDLER(1); |
| static DEFINE_HANDLER(2); |
| static DEFINE_HANDLER(3); |
| static DEFINE_HANDLER(4); |
| static DEFINE_HANDLER(5); |
| static DEFINE_HANDLER(6); |
| static DEFINE_HANDLER(7); |
| |
| static void mtip_disable_link_opts(struct driver_data *dd, struct pci_dev *pdev) |
| { |
| int pos; |
| unsigned short pcie_dev_ctrl; |
| |
| pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); |
| if (pos) { |
| pci_read_config_word(pdev, |
| pos + PCI_EXP_DEVCTL, |
| &pcie_dev_ctrl); |
| if (pcie_dev_ctrl & (1 << 11) || |
| pcie_dev_ctrl & (1 << 4)) { |
| dev_info(&dd->pdev->dev, |
| "Disabling ERO/No-Snoop on bridge device %04x:%04x\n", |
| pdev->vendor, pdev->device); |
| pcie_dev_ctrl &= ~(PCI_EXP_DEVCTL_NOSNOOP_EN | |
| PCI_EXP_DEVCTL_RELAX_EN); |
| pci_write_config_word(pdev, |
| pos + PCI_EXP_DEVCTL, |
| pcie_dev_ctrl); |
| } |
| } |
| } |
| |
| static void mtip_fix_ero_nosnoop(struct driver_data *dd, struct pci_dev *pdev) |
| { |
| /* |
| * This workaround is specific to AMD/ATI chipset with a PCI upstream |
| * device with device id 0x5aXX |
| */ |
| if (pdev->bus && pdev->bus->self) { |
| if (pdev->bus->self->vendor == PCI_VENDOR_ID_ATI && |
| ((pdev->bus->self->device & 0xff00) == 0x5a00)) { |
| mtip_disable_link_opts(dd, pdev->bus->self); |
| } else { |
| /* Check further up the topology */ |
| struct pci_dev *parent_dev = pdev->bus->self; |
| if (parent_dev->bus && |
| parent_dev->bus->parent && |
| parent_dev->bus->parent->self && |
| parent_dev->bus->parent->self->vendor == |
| PCI_VENDOR_ID_ATI && |
| (parent_dev->bus->parent->self->device & |
| 0xff00) == 0x5a00) { |
| mtip_disable_link_opts(dd, |
| parent_dev->bus->parent->self); |
| } |
| } |
| } |
| } |
| |
| /* |
| * Called for each supported PCI device detected. |
| * |
| * This function allocates the private data structure, enables the |
| * PCI device and then calls the block layer initialization function. |
| * |
| * return value |
| * 0 on success else an error code. |
| */ |
| static int mtip_pci_probe(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| int rv = 0; |
| struct driver_data *dd = NULL; |
| char cpu_list[256]; |
| const struct cpumask *node_mask; |
| int cpu, i = 0, j = 0; |
| int my_node = NUMA_NO_NODE; |
| unsigned long flags; |
| |
| /* Allocate memory for this devices private data. */ |
| my_node = pcibus_to_node(pdev->bus); |
| if (my_node != NUMA_NO_NODE) { |
| if (!node_online(my_node)) |
| my_node = mtip_get_next_rr_node(); |
| } else { |
| dev_info(&pdev->dev, "Kernel not reporting proximity, choosing a node\n"); |
| my_node = mtip_get_next_rr_node(); |
| } |
| dev_info(&pdev->dev, "NUMA node %d (closest: %d,%d, probe on %d:%d)\n", |
| my_node, pcibus_to_node(pdev->bus), dev_to_node(&pdev->dev), |
| cpu_to_node(raw_smp_processor_id()), raw_smp_processor_id()); |
| |
| dd = kzalloc_node(sizeof(struct driver_data), GFP_KERNEL, my_node); |
| if (dd == NULL) { |
| dev_err(&pdev->dev, |
| "Unable to allocate memory for driver data\n"); |
| return -ENOMEM; |
| } |
| |
| /* Attach the private data to this PCI device. */ |
| pci_set_drvdata(pdev, dd); |
| |
| rv = pcim_enable_device(pdev); |
| if (rv < 0) { |
| dev_err(&pdev->dev, "Unable to enable device\n"); |
| goto iomap_err; |
| } |
| |
| /* Map BAR5 to memory. */ |
| rv = pcim_iomap_regions(pdev, 1 << MTIP_ABAR, MTIP_DRV_NAME); |
| if (rv < 0) { |
| dev_err(&pdev->dev, "Unable to map regions\n"); |
| goto iomap_err; |
| } |
| |
| rv = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); |
| if (rv) { |
| dev_warn(&pdev->dev, "64-bit DMA enable failed\n"); |
| goto setmask_err; |
| } |
| |
| /* Copy the info we may need later into the private data structure. */ |
| dd->major = mtip_major; |
| dd->instance = instance; |
| dd->pdev = pdev; |
| dd->numa_node = my_node; |
| |
| INIT_LIST_HEAD(&dd->online_list); |
| INIT_LIST_HEAD(&dd->remove_list); |
| |
| memset(dd->workq_name, 0, 32); |
| snprintf(dd->workq_name, 31, "mtipq%d", dd->instance); |
| |
| dd->isr_workq = create_workqueue(dd->workq_name); |
| if (!dd->isr_workq) { |
| dev_warn(&pdev->dev, "Can't create wq %d\n", dd->instance); |
| rv = -ENOMEM; |
| goto setmask_err; |
| } |
| |
| memset(cpu_list, 0, sizeof(cpu_list)); |
| |
| node_mask = cpumask_of_node(dd->numa_node); |
| if (!cpumask_empty(node_mask)) { |
| for_each_cpu(cpu, node_mask) |
| { |
| snprintf(&cpu_list[j], 256 - j, "%d ", cpu); |
| j = strlen(cpu_list); |
| } |
| |
| dev_info(&pdev->dev, "Node %d on package %d has %d cpu(s): %s\n", |
| dd->numa_node, |
| topology_physical_package_id(cpumask_first(node_mask)), |
| nr_cpus_node(dd->numa_node), |
| cpu_list); |
| } else |
| dev_dbg(&pdev->dev, "mtip32xx: node_mask empty\n"); |
| |
| dd->isr_binding = get_least_used_cpu_on_node(dd->numa_node); |
| dev_info(&pdev->dev, "Initial IRQ binding node:cpu %d:%d\n", |
| cpu_to_node(dd->isr_binding), dd->isr_binding); |
| |
| /* first worker context always runs in ISR */ |
| dd->work[0].cpu_binding = dd->isr_binding; |
| dd->work[1].cpu_binding = get_least_used_cpu_on_node(dd->numa_node); |
| dd->work[2].cpu_binding = get_least_used_cpu_on_node(dd->numa_node); |
| dd->work[3].cpu_binding = dd->work[0].cpu_binding; |
| dd->work[4].cpu_binding = dd->work[1].cpu_binding; |
| dd->work[5].cpu_binding = dd->work[2].cpu_binding; |
| dd->work[6].cpu_binding = dd->work[2].cpu_binding; |
| dd->work[7].cpu_binding = dd->work[1].cpu_binding; |
| |
| /* Log the bindings */ |
| for_each_present_cpu(cpu) { |
| memset(cpu_list, 0, sizeof(cpu_list)); |
| for (i = 0, j = 0; i < MTIP_MAX_SLOT_GROUPS; i++) { |
| if (dd->work[i].cpu_binding == cpu) { |
| snprintf(&cpu_list[j], 256 - j, "%d ", i); |
| j = strlen(cpu_list); |
| } |
| } |
| if (j) |
| dev_info(&pdev->dev, "CPU %d: WQs %s\n", cpu, cpu_list); |
| } |
| |
| INIT_WORK(&dd->work[0].work, mtip_workq_sdbf0); |
| INIT_WORK(&dd->work[1].work, mtip_workq_sdbf1); |
| INIT_WORK(&dd->work[2].work, mtip_workq_sdbf2); |
| INIT_WORK(&dd->work[3].work, mtip_workq_sdbf3); |
| INIT_WORK(&dd->work[4].work, mtip_workq_sdbf4); |
| INIT_WORK(&dd->work[5].work, mtip_workq_sdbf5); |
| INIT_WORK(&dd->work[6].work, mtip_workq_sdbf6); |
| INIT_WORK(&dd->work[7].work, mtip_workq_sdbf7); |
| |
| pci_set_master(pdev); |
| rv = pci_enable_msi(pdev); |
| if (rv) { |
| dev_warn(&pdev->dev, |
| "Unable to enable MSI interrupt.\n"); |
| goto msi_initialize_err; |
| } |
| |
| mtip_fix_ero_nosnoop(dd, pdev); |
| |
| /* Initialize the block layer. */ |
| rv = mtip_block_initialize(dd); |
| if (rv < 0) { |
| dev_err(&pdev->dev, |
| "Unable to initialize block layer\n"); |
| goto block_initialize_err; |
| } |
| |
| /* |
| * Increment the instance count so that each device has a unique |
| * instance number. |
| */ |
| instance++; |
| if (rv != MTIP_FTL_REBUILD_MAGIC) |
| set_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag); |
| else |
| rv = 0; /* device in rebuild state, return 0 from probe */ |
| |
| /* Add to online list even if in ftl rebuild */ |
| spin_lock_irqsave(&dev_lock, flags); |
| list_add(&dd->online_list, &online_list); |
| spin_unlock_irqrestore(&dev_lock, flags); |
| |
| goto done; |
| |
| block_initialize_err: |
| pci_disable_msi(pdev); |
| |
| msi_initialize_err: |
| if (dd->isr_workq) { |
| flush_workqueue(dd->isr_workq); |
| destroy_workqueue(dd->isr_workq); |
| drop_cpu(dd->work[0].cpu_binding); |
| drop_cpu(dd->work[1].cpu_binding); |
| drop_cpu(dd->work[2].cpu_binding); |
| } |
| setmask_err: |
| pcim_iounmap_regions(pdev, 1 << MTIP_ABAR); |
| |
| iomap_err: |
| kfree(dd); |
| pci_set_drvdata(pdev, NULL); |
| return rv; |
| done: |
| return rv; |
| } |
| |
| /* |
| * Called for each probed device when the device is removed or the |
| * driver is unloaded. |
| * |
| * return value |
| * None |
| */ |
| static void mtip_pci_remove(struct pci_dev *pdev) |
| { |
| struct driver_data *dd = pci_get_drvdata(pdev); |
| unsigned long flags, to; |
| |
| set_bit(MTIP_DDF_REMOVAL_BIT, &dd->dd_flag); |
| |
| spin_lock_irqsave(&dev_lock, flags); |
| list_del_init(&dd->online_list); |
| list_add(&dd->remove_list, &removing_list); |
| spin_unlock_irqrestore(&dev_lock, flags); |
| |
| mtip_check_surprise_removal(pdev); |
| synchronize_irq(dd->pdev->irq); |
| |
| /* Spin until workers are done */ |
| to = jiffies + msecs_to_jiffies(4000); |
| do { |
| msleep(20); |
| } while (atomic_read(&dd->irq_workers_active) != 0 && |
| time_before(jiffies, to)); |
| |
| if (!dd->sr) |
| fsync_bdev(dd->bdev); |
| |
| if (atomic_read(&dd->irq_workers_active) != 0) { |
| dev_warn(&dd->pdev->dev, |
| "Completion workers still active!\n"); |
| } |
| |
| blk_set_queue_dying(dd->queue); |
| set_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag); |
| |
| /* Clean up the block layer. */ |
| mtip_block_remove(dd); |
| |
| if (dd->isr_workq) { |
| flush_workqueue(dd->isr_workq); |
| destroy_workqueue(dd->isr_workq); |
| drop_cpu(dd->work[0].cpu_binding); |
| drop_cpu(dd->work[1].cpu_binding); |
| drop_cpu(dd->work[2].cpu_binding); |
| } |
| |
| pci_disable_msi(pdev); |
| |
| spin_lock_irqsave(&dev_lock, flags); |
| list_del_init(&dd->remove_list); |
| spin_unlock_irqrestore(&dev_lock, flags); |
| |
| kfree(dd); |
| |
| pcim_iounmap_regions(pdev, 1 << MTIP_ABAR); |
| pci_set_drvdata(pdev, NULL); |
| } |
| |
| /* |
| * Called for each probed device when the device is suspended. |
| * |
| * return value |
| * 0 Success |
| * <0 Error |
| */ |
| static int mtip_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) |
| { |
| int rv = 0; |
| struct driver_data *dd = pci_get_drvdata(pdev); |
| |
| if (!dd) { |
| dev_err(&pdev->dev, |
| "Driver private datastructure is NULL\n"); |
| return -EFAULT; |
| } |
| |
| set_bit(MTIP_DDF_RESUME_BIT, &dd->dd_flag); |
| |
| /* Disable ports & interrupts then send standby immediate */ |
| rv = mtip_block_suspend(dd); |
| if (rv < 0) { |
| dev_err(&pdev->dev, |
| "Failed to suspend controller\n"); |
| return rv; |
| } |
| |
| /* |
| * Save the pci config space to pdev structure & |
| * disable the device |
| */ |
| pci_save_state(pdev); |
| pci_disable_device(pdev); |
| |
| /* Move to Low power state*/ |
| pci_set_power_state(pdev, PCI_D3hot); |
| |
| return rv; |
| } |
| |
| /* |
| * Called for each probed device when the device is resumed. |
| * |
| * return value |
| * 0 Success |
| * <0 Error |
| */ |
| static int mtip_pci_resume(struct pci_dev *pdev) |
| { |
| int rv = 0; |
| struct driver_data *dd; |
| |
| dd = pci_get_drvdata(pdev); |
| if (!dd) { |
| dev_err(&pdev->dev, |
| "Driver private datastructure is NULL\n"); |
| return -EFAULT; |
| } |
| |
| /* Move the device to active State */ |
| pci_set_power_state(pdev, PCI_D0); |
| |
| /* Restore PCI configuration space */ |
| pci_restore_state(pdev); |
| |
| /* Enable the PCI device*/ |
| rv = pcim_enable_device(pdev); |
| if (rv < 0) { |
| dev_err(&pdev->dev, |
| "Failed to enable card during resume\n"); |
| goto err; |
| } |
| pci_set_master(pdev); |
| |
| /* |
| * Calls hbaReset, initPort, & startPort function |
| * then enables interrupts |
| */ |
| rv = mtip_block_resume(dd); |
| if (rv < 0) |
| dev_err(&pdev->dev, "Unable to resume\n"); |
| |
| err: |
| clear_bit(MTIP_DDF_RESUME_BIT, &dd->dd_flag); |
| |
| return rv; |
| } |
| |
| /* |
| * Shutdown routine |
| * |
| * return value |
| * None |
| */ |
| static void mtip_pci_shutdown(struct pci_dev *pdev) |
| { |
| struct driver_data *dd = pci_get_drvdata(pdev); |
| if (dd) |
| mtip_block_shutdown(dd); |
| } |
| |
| /* Table of device ids supported by this driver. */ |
| static const struct pci_device_id mtip_pci_tbl[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P320H_DEVICE_ID) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P320M_DEVICE_ID) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P320S_DEVICE_ID) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P325M_DEVICE_ID) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P420H_DEVICE_ID) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P420M_DEVICE_ID) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P425M_DEVICE_ID) }, |
| { 0 } |
| }; |
| |
| /* Structure that describes the PCI driver functions. */ |
| static struct pci_driver mtip_pci_driver = { |
| .name = MTIP_DRV_NAME, |
| .id_table = mtip_pci_tbl, |
| .probe = mtip_pci_probe, |
| .remove = mtip_pci_remove, |
| .suspend = mtip_pci_suspend, |
| .resume = mtip_pci_resume, |
| .shutdown = mtip_pci_shutdown, |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, mtip_pci_tbl); |
| |
| /* |
| * Module initialization function. |
| * |
| * Called once when the module is loaded. This function allocates a major |
| * block device number to the Cyclone devices and registers the PCI layer |
| * of the driver. |
| * |
| * Return value |
| * 0 on success else error code. |
| */ |
| static int __init mtip_init(void) |
| { |
| int error; |
| |
| pr_info(MTIP_DRV_NAME " Version " MTIP_DRV_VERSION "\n"); |
| |
| spin_lock_init(&dev_lock); |
| |
| INIT_LIST_HEAD(&online_list); |
| INIT_LIST_HEAD(&removing_list); |
| |
| /* Allocate a major block device number to use with this driver. */ |
| error = register_blkdev(0, MTIP_DRV_NAME); |
| if (error <= 0) { |
| pr_err("Unable to register block device (%d)\n", |
| error); |
| return -EBUSY; |
| } |
| mtip_major = error; |
| |
| dfs_parent = debugfs_create_dir("rssd", NULL); |
| if (IS_ERR_OR_NULL(dfs_parent)) { |
| pr_warn("Error creating debugfs parent\n"); |
| dfs_parent = NULL; |
| } |
| if (dfs_parent) { |
| dfs_device_status = debugfs_create_file("device_status", |
| 0444, dfs_parent, NULL, |
| &mtip_device_status_fops); |
| if (IS_ERR_OR_NULL(dfs_device_status)) { |
| pr_err("Error creating device_status node\n"); |
| dfs_device_status = NULL; |
| } |
| } |
| |
| /* Register our PCI operations. */ |
| error = pci_register_driver(&mtip_pci_driver); |
| if (error) { |
| debugfs_remove(dfs_parent); |
| unregister_blkdev(mtip_major, MTIP_DRV_NAME); |
| } |
| |
| return error; |
| } |
| |
| /* |
| * Module de-initialization function. |
| * |
| * Called once when the module is unloaded. This function deallocates |
| * the major block device number allocated by mtip_init() and |
| * unregisters the PCI layer of the driver. |
| * |
| * Return value |
| * none |
| */ |
| static void __exit mtip_exit(void) |
| { |
| /* Release the allocated major block device number. */ |
| unregister_blkdev(mtip_major, MTIP_DRV_NAME); |
| |
| /* Unregister the PCI driver. */ |
| pci_unregister_driver(&mtip_pci_driver); |
| |
| debugfs_remove_recursive(dfs_parent); |
| } |
| |
| MODULE_AUTHOR("Micron Technology, Inc"); |
| MODULE_DESCRIPTION("Micron RealSSD PCIe Block Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(MTIP_DRV_VERSION); |
| |
| module_init(mtip_init); |
| module_exit(mtip_exit); |