| /* |
| pf.c (c) 1997-8 Grant R. Guenther <grant@torque.net> |
| Under the terms of the GNU General Public License. |
| |
| This is the high-level driver for parallel port ATAPI disk |
| drives based on chips supported by the paride module. |
| |
| By default, the driver will autoprobe for a single parallel |
| port ATAPI disk drive, but if their individual parameters are |
| specified, the driver can handle up to 4 drives. |
| |
| The behaviour of the pf driver can be altered by setting |
| some parameters from the insmod command line. The following |
| parameters are adjustable: |
| |
| drive0 These four arguments can be arrays of |
| drive1 1-7 integers as follows: |
| drive2 |
| drive3 <prt>,<pro>,<uni>,<mod>,<slv>,<lun>,<dly> |
| |
| Where, |
| |
| <prt> is the base of the parallel port address for |
| the corresponding drive. (required) |
| |
| <pro> is the protocol number for the adapter that |
| supports this drive. These numbers are |
| logged by 'paride' when the protocol modules |
| are initialised. (0 if not given) |
| |
| <uni> for those adapters that support chained |
| devices, this is the unit selector for the |
| chain of devices on the given port. It should |
| be zero for devices that don't support chaining. |
| (0 if not given) |
| |
| <mod> this can be -1 to choose the best mode, or one |
| of the mode numbers supported by the adapter. |
| (-1 if not given) |
| |
| <slv> ATAPI CDroms can be jumpered to master or slave. |
| Set this to 0 to choose the master drive, 1 to |
| choose the slave, -1 (the default) to choose the |
| first drive found. |
| |
| <lun> Some ATAPI devices support multiple LUNs. |
| One example is the ATAPI PD/CD drive from |
| Matshita/Panasonic. This device has a |
| CD drive on LUN 0 and a PD drive on LUN 1. |
| By default, the driver will search for the |
| first LUN with a supported device. Set |
| this parameter to force it to use a specific |
| LUN. (default -1) |
| |
| <dly> some parallel ports require the driver to |
| go more slowly. -1 sets a default value that |
| should work with the chosen protocol. Otherwise, |
| set this to a small integer, the larger it is |
| the slower the port i/o. In some cases, setting |
| this to zero will speed up the device. (default -1) |
| |
| major You may use this parameter to override the |
| default major number (47) that this driver |
| will use. Be sure to change the device |
| name as well. |
| |
| name This parameter is a character string that |
| contains the name the kernel will use for this |
| device (in /proc output, for instance). |
| (default "pf"). |
| |
| cluster The driver will attempt to aggregate requests |
| for adjacent blocks into larger multi-block |
| clusters. The maximum cluster size (in 512 |
| byte sectors) is set with this parameter. |
| (default 64) |
| |
| verbose This parameter controls the amount of logging |
| that the driver will do. Set it to 0 for |
| normal operation, 1 to see autoprobe progress |
| messages, or 2 to see additional debugging |
| output. (default 0) |
| |
| nice This parameter controls the driver's use of |
| idle CPU time, at the expense of some speed. |
| |
| If this driver is built into the kernel, you can use the |
| following command line parameters, with the same values |
| as the corresponding module parameters listed above: |
| |
| pf.drive0 |
| pf.drive1 |
| pf.drive2 |
| pf.drive3 |
| pf.cluster |
| pf.nice |
| |
| In addition, you can use the parameter pf.disable to disable |
| the driver entirely. |
| |
| */ |
| |
| /* Changes: |
| |
| 1.01 GRG 1998.05.03 Changes for SMP. Eliminate sti(). |
| Fix for drives that don't clear STAT_ERR |
| until after next CDB delivered. |
| Small change in pf_completion to round |
| up transfer size. |
| 1.02 GRG 1998.06.16 Eliminated an Ugh |
| 1.03 GRG 1998.08.16 Use HZ in loop timings, extra debugging |
| 1.04 GRG 1998.09.24 Added jumbo support |
| |
| */ |
| |
| #define PF_VERSION "1.04" |
| #define PF_MAJOR 47 |
| #define PF_NAME "pf" |
| #define PF_UNITS 4 |
| |
| #include <linux/types.h> |
| |
| /* Here are things one can override from the insmod command. |
| Most are autoprobed by paride unless set here. Verbose is off |
| by default. |
| |
| */ |
| |
| static bool verbose = 0; |
| static int major = PF_MAJOR; |
| static char *name = PF_NAME; |
| static int cluster = 64; |
| static int nice = 0; |
| static int disable = 0; |
| |
| static int drive0[7] = { 0, 0, 0, -1, -1, -1, -1 }; |
| static int drive1[7] = { 0, 0, 0, -1, -1, -1, -1 }; |
| static int drive2[7] = { 0, 0, 0, -1, -1, -1, -1 }; |
| static int drive3[7] = { 0, 0, 0, -1, -1, -1, -1 }; |
| |
| static int (*drives[4])[7] = {&drive0, &drive1, &drive2, &drive3}; |
| static int pf_drive_count; |
| |
| enum {D_PRT, D_PRO, D_UNI, D_MOD, D_SLV, D_LUN, D_DLY}; |
| |
| /* end of parameters */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/fs.h> |
| #include <linux/delay.h> |
| #include <linux/hdreg.h> |
| #include <linux/cdrom.h> |
| #include <linux/spinlock.h> |
| #include <linux/blk-mq.h> |
| #include <linux/blkpg.h> |
| #include <linux/mutex.h> |
| #include <linux/uaccess.h> |
| |
| static DEFINE_MUTEX(pf_mutex); |
| static DEFINE_SPINLOCK(pf_spin_lock); |
| |
| module_param(verbose, bool, 0644); |
| module_param(major, int, 0); |
| module_param(name, charp, 0); |
| module_param(cluster, int, 0); |
| module_param(nice, int, 0); |
| module_param_array(drive0, int, NULL, 0); |
| module_param_array(drive1, int, NULL, 0); |
| module_param_array(drive2, int, NULL, 0); |
| module_param_array(drive3, int, NULL, 0); |
| |
| #include "paride.h" |
| #include "pseudo.h" |
| |
| /* constants for faking geometry numbers */ |
| |
| #define PF_FD_MAX 8192 /* use FD geometry under this size */ |
| #define PF_FD_HDS 2 |
| #define PF_FD_SPT 18 |
| #define PF_HD_HDS 64 |
| #define PF_HD_SPT 32 |
| |
| #define PF_MAX_RETRIES 5 |
| #define PF_TMO 800 /* interrupt timeout in jiffies */ |
| #define PF_SPIN_DEL 50 /* spin delay in micro-seconds */ |
| |
| #define PF_SPIN (1000000*PF_TMO)/(HZ*PF_SPIN_DEL) |
| |
| #define STAT_ERR 0x00001 |
| #define STAT_INDEX 0x00002 |
| #define STAT_ECC 0x00004 |
| #define STAT_DRQ 0x00008 |
| #define STAT_SEEK 0x00010 |
| #define STAT_WRERR 0x00020 |
| #define STAT_READY 0x00040 |
| #define STAT_BUSY 0x00080 |
| |
| #define ATAPI_REQ_SENSE 0x03 |
| #define ATAPI_LOCK 0x1e |
| #define ATAPI_DOOR 0x1b |
| #define ATAPI_MODE_SENSE 0x5a |
| #define ATAPI_CAPACITY 0x25 |
| #define ATAPI_IDENTIFY 0x12 |
| #define ATAPI_READ_10 0x28 |
| #define ATAPI_WRITE_10 0x2a |
| |
| static int pf_open(struct block_device *bdev, fmode_t mode); |
| static blk_status_t pf_queue_rq(struct blk_mq_hw_ctx *hctx, |
| const struct blk_mq_queue_data *bd); |
| static int pf_ioctl(struct block_device *bdev, fmode_t mode, |
| unsigned int cmd, unsigned long arg); |
| static int pf_getgeo(struct block_device *bdev, struct hd_geometry *geo); |
| |
| static void pf_release(struct gendisk *disk, fmode_t mode); |
| |
| static int pf_detect(void); |
| static void do_pf_read(void); |
| static void do_pf_read_start(void); |
| static void do_pf_write(void); |
| static void do_pf_write_start(void); |
| static void do_pf_read_drq(void); |
| static void do_pf_write_done(void); |
| |
| #define PF_NM 0 |
| #define PF_RO 1 |
| #define PF_RW 2 |
| |
| #define PF_NAMELEN 8 |
| |
| struct pf_unit { |
| struct pi_adapter pia; /* interface to paride layer */ |
| struct pi_adapter *pi; |
| int removable; /* removable media device ? */ |
| int media_status; /* media present ? WP ? */ |
| int drive; /* drive */ |
| int lun; |
| int access; /* count of active opens ... */ |
| int present; /* device present ? */ |
| char name[PF_NAMELEN]; /* pf0, pf1, ... */ |
| struct gendisk *disk; |
| struct blk_mq_tag_set tag_set; |
| struct list_head rq_list; |
| }; |
| |
| static struct pf_unit units[PF_UNITS]; |
| |
| static int pf_identify(struct pf_unit *pf); |
| static void pf_lock(struct pf_unit *pf, int func); |
| static void pf_eject(struct pf_unit *pf); |
| static unsigned int pf_check_events(struct gendisk *disk, |
| unsigned int clearing); |
| |
| static char pf_scratch[512]; /* scratch block buffer */ |
| |
| /* the variables below are used mainly in the I/O request engine, which |
| processes only one request at a time. |
| */ |
| |
| static int pf_retries = 0; /* i/o error retry count */ |
| static int pf_busy = 0; /* request being processed ? */ |
| static struct request *pf_req; /* current request */ |
| static int pf_block; /* address of next requested block */ |
| static int pf_count; /* number of blocks still to do */ |
| static int pf_run; /* sectors in current cluster */ |
| static int pf_cmd; /* current command READ/WRITE */ |
| static struct pf_unit *pf_current;/* unit of current request */ |
| static int pf_mask; /* stopper for pseudo-int */ |
| static char *pf_buf; /* buffer for request in progress */ |
| static void *par_drv; /* reference of parport driver */ |
| |
| /* kernel glue structures */ |
| |
| static const struct block_device_operations pf_fops = { |
| .owner = THIS_MODULE, |
| .open = pf_open, |
| .release = pf_release, |
| .ioctl = pf_ioctl, |
| .getgeo = pf_getgeo, |
| .check_events = pf_check_events, |
| }; |
| |
| static const struct blk_mq_ops pf_mq_ops = { |
| .queue_rq = pf_queue_rq, |
| }; |
| |
| static void __init pf_init_units(void) |
| { |
| struct pf_unit *pf; |
| int unit; |
| |
| pf_drive_count = 0; |
| for (unit = 0, pf = units; unit < PF_UNITS; unit++, pf++) { |
| struct gendisk *disk; |
| |
| disk = alloc_disk(1); |
| if (!disk) |
| continue; |
| |
| disk->queue = blk_mq_init_sq_queue(&pf->tag_set, &pf_mq_ops, |
| 1, BLK_MQ_F_SHOULD_MERGE); |
| if (IS_ERR(disk->queue)) { |
| put_disk(disk); |
| disk->queue = NULL; |
| continue; |
| } |
| |
| INIT_LIST_HEAD(&pf->rq_list); |
| disk->queue->queuedata = pf; |
| blk_queue_max_segments(disk->queue, cluster); |
| blk_queue_bounce_limit(disk->queue, BLK_BOUNCE_HIGH); |
| pf->disk = disk; |
| pf->pi = &pf->pia; |
| pf->media_status = PF_NM; |
| pf->drive = (*drives[unit])[D_SLV]; |
| pf->lun = (*drives[unit])[D_LUN]; |
| snprintf(pf->name, PF_NAMELEN, "%s%d", name, unit); |
| disk->major = major; |
| disk->first_minor = unit; |
| strcpy(disk->disk_name, pf->name); |
| disk->fops = &pf_fops; |
| if (!(*drives[unit])[D_PRT]) |
| pf_drive_count++; |
| } |
| } |
| |
| static int pf_open(struct block_device *bdev, fmode_t mode) |
| { |
| struct pf_unit *pf = bdev->bd_disk->private_data; |
| int ret; |
| |
| mutex_lock(&pf_mutex); |
| pf_identify(pf); |
| |
| ret = -ENODEV; |
| if (pf->media_status == PF_NM) |
| goto out; |
| |
| ret = -EROFS; |
| if ((pf->media_status == PF_RO) && (mode & FMODE_WRITE)) |
| goto out; |
| |
| ret = 0; |
| pf->access++; |
| if (pf->removable) |
| pf_lock(pf, 1); |
| out: |
| mutex_unlock(&pf_mutex); |
| return ret; |
| } |
| |
| static int pf_getgeo(struct block_device *bdev, struct hd_geometry *geo) |
| { |
| struct pf_unit *pf = bdev->bd_disk->private_data; |
| sector_t capacity = get_capacity(pf->disk); |
| |
| if (capacity < PF_FD_MAX) { |
| geo->cylinders = sector_div(capacity, PF_FD_HDS * PF_FD_SPT); |
| geo->heads = PF_FD_HDS; |
| geo->sectors = PF_FD_SPT; |
| } else { |
| geo->cylinders = sector_div(capacity, PF_HD_HDS * PF_HD_SPT); |
| geo->heads = PF_HD_HDS; |
| geo->sectors = PF_HD_SPT; |
| } |
| |
| return 0; |
| } |
| |
| static int pf_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg) |
| { |
| struct pf_unit *pf = bdev->bd_disk->private_data; |
| |
| if (cmd != CDROMEJECT) |
| return -EINVAL; |
| |
| if (pf->access != 1) |
| return -EBUSY; |
| mutex_lock(&pf_mutex); |
| pf_eject(pf); |
| mutex_unlock(&pf_mutex); |
| |
| return 0; |
| } |
| |
| static void pf_release(struct gendisk *disk, fmode_t mode) |
| { |
| struct pf_unit *pf = disk->private_data; |
| |
| mutex_lock(&pf_mutex); |
| if (pf->access <= 0) { |
| mutex_unlock(&pf_mutex); |
| WARN_ON(1); |
| return; |
| } |
| |
| pf->access--; |
| |
| if (!pf->access && pf->removable) |
| pf_lock(pf, 0); |
| |
| mutex_unlock(&pf_mutex); |
| } |
| |
| static unsigned int pf_check_events(struct gendisk *disk, unsigned int clearing) |
| { |
| return DISK_EVENT_MEDIA_CHANGE; |
| } |
| |
| static inline int status_reg(struct pf_unit *pf) |
| { |
| return pi_read_regr(pf->pi, 1, 6); |
| } |
| |
| static inline int read_reg(struct pf_unit *pf, int reg) |
| { |
| return pi_read_regr(pf->pi, 0, reg); |
| } |
| |
| static inline void write_reg(struct pf_unit *pf, int reg, int val) |
| { |
| pi_write_regr(pf->pi, 0, reg, val); |
| } |
| |
| static int pf_wait(struct pf_unit *pf, int go, int stop, char *fun, char *msg) |
| { |
| int j, r, e, s, p; |
| |
| j = 0; |
| while ((((r = status_reg(pf)) & go) || (stop && (!(r & stop)))) |
| && (j++ < PF_SPIN)) |
| udelay(PF_SPIN_DEL); |
| |
| if ((r & (STAT_ERR & stop)) || (j > PF_SPIN)) { |
| s = read_reg(pf, 7); |
| e = read_reg(pf, 1); |
| p = read_reg(pf, 2); |
| if (j > PF_SPIN) |
| e |= 0x100; |
| if (fun) |
| printk("%s: %s %s: alt=0x%x stat=0x%x err=0x%x" |
| " loop=%d phase=%d\n", |
| pf->name, fun, msg, r, s, e, j, p); |
| return (e << 8) + s; |
| } |
| return 0; |
| } |
| |
| static int pf_command(struct pf_unit *pf, char *cmd, int dlen, char *fun) |
| { |
| pi_connect(pf->pi); |
| |
| write_reg(pf, 6, 0xa0+0x10*pf->drive); |
| |
| if (pf_wait(pf, STAT_BUSY | STAT_DRQ, 0, fun, "before command")) { |
| pi_disconnect(pf->pi); |
| return -1; |
| } |
| |
| write_reg(pf, 4, dlen % 256); |
| write_reg(pf, 5, dlen / 256); |
| write_reg(pf, 7, 0xa0); /* ATAPI packet command */ |
| |
| if (pf_wait(pf, STAT_BUSY, STAT_DRQ, fun, "command DRQ")) { |
| pi_disconnect(pf->pi); |
| return -1; |
| } |
| |
| if (read_reg(pf, 2) != 1) { |
| printk("%s: %s: command phase error\n", pf->name, fun); |
| pi_disconnect(pf->pi); |
| return -1; |
| } |
| |
| pi_write_block(pf->pi, cmd, 12); |
| |
| return 0; |
| } |
| |
| static int pf_completion(struct pf_unit *pf, char *buf, char *fun) |
| { |
| int r, s, n; |
| |
| r = pf_wait(pf, STAT_BUSY, STAT_DRQ | STAT_READY | STAT_ERR, |
| fun, "completion"); |
| |
| if ((read_reg(pf, 2) & 2) && (read_reg(pf, 7) & STAT_DRQ)) { |
| n = (((read_reg(pf, 4) + 256 * read_reg(pf, 5)) + |
| 3) & 0xfffc); |
| pi_read_block(pf->pi, buf, n); |
| } |
| |
| s = pf_wait(pf, STAT_BUSY, STAT_READY | STAT_ERR, fun, "data done"); |
| |
| pi_disconnect(pf->pi); |
| |
| return (r ? r : s); |
| } |
| |
| static void pf_req_sense(struct pf_unit *pf, int quiet) |
| { |
| char rs_cmd[12] = |
| { ATAPI_REQ_SENSE, pf->lun << 5, 0, 0, 16, 0, 0, 0, 0, 0, 0, 0 }; |
| char buf[16]; |
| int r; |
| |
| r = pf_command(pf, rs_cmd, 16, "Request sense"); |
| mdelay(1); |
| if (!r) |
| pf_completion(pf, buf, "Request sense"); |
| |
| if ((!r) && (!quiet)) |
| printk("%s: Sense key: %x, ASC: %x, ASQ: %x\n", |
| pf->name, buf[2] & 0xf, buf[12], buf[13]); |
| } |
| |
| static int pf_atapi(struct pf_unit *pf, char *cmd, int dlen, char *buf, char *fun) |
| { |
| int r; |
| |
| r = pf_command(pf, cmd, dlen, fun); |
| mdelay(1); |
| if (!r) |
| r = pf_completion(pf, buf, fun); |
| if (r) |
| pf_req_sense(pf, !fun); |
| |
| return r; |
| } |
| |
| static void pf_lock(struct pf_unit *pf, int func) |
| { |
| char lo_cmd[12] = { ATAPI_LOCK, pf->lun << 5, 0, 0, func, 0, 0, 0, 0, 0, 0, 0 }; |
| |
| pf_atapi(pf, lo_cmd, 0, pf_scratch, func ? "lock" : "unlock"); |
| } |
| |
| static void pf_eject(struct pf_unit *pf) |
| { |
| char ej_cmd[12] = { ATAPI_DOOR, pf->lun << 5, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0 }; |
| |
| pf_lock(pf, 0); |
| pf_atapi(pf, ej_cmd, 0, pf_scratch, "eject"); |
| } |
| |
| #define PF_RESET_TMO 30 /* in tenths of a second */ |
| |
| static void pf_sleep(int cs) |
| { |
| schedule_timeout_interruptible(cs); |
| } |
| |
| /* the ATAPI standard actually specifies the contents of all 7 registers |
| after a reset, but the specification is ambiguous concerning the last |
| two bytes, and different drives interpret the standard differently. |
| */ |
| |
| static int pf_reset(struct pf_unit *pf) |
| { |
| int i, k, flg; |
| int expect[5] = { 1, 1, 1, 0x14, 0xeb }; |
| |
| pi_connect(pf->pi); |
| write_reg(pf, 6, 0xa0+0x10*pf->drive); |
| write_reg(pf, 7, 8); |
| |
| pf_sleep(20 * HZ / 1000); |
| |
| k = 0; |
| while ((k++ < PF_RESET_TMO) && (status_reg(pf) & STAT_BUSY)) |
| pf_sleep(HZ / 10); |
| |
| flg = 1; |
| for (i = 0; i < 5; i++) |
| flg &= (read_reg(pf, i + 1) == expect[i]); |
| |
| if (verbose) { |
| printk("%s: Reset (%d) signature = ", pf->name, k); |
| for (i = 0; i < 5; i++) |
| printk("%3x", read_reg(pf, i + 1)); |
| if (!flg) |
| printk(" (incorrect)"); |
| printk("\n"); |
| } |
| |
| pi_disconnect(pf->pi); |
| return flg - 1; |
| } |
| |
| static void pf_mode_sense(struct pf_unit *pf) |
| { |
| char ms_cmd[12] = |
| { ATAPI_MODE_SENSE, pf->lun << 5, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0 }; |
| char buf[8]; |
| |
| pf_atapi(pf, ms_cmd, 8, buf, "mode sense"); |
| pf->media_status = PF_RW; |
| if (buf[3] & 0x80) |
| pf->media_status = PF_RO; |
| } |
| |
| static void xs(char *buf, char *targ, int offs, int len) |
| { |
| int j, k, l; |
| |
| j = 0; |
| l = 0; |
| for (k = 0; k < len; k++) |
| if ((buf[k + offs] != 0x20) || (buf[k + offs] != l)) |
| l = targ[j++] = buf[k + offs]; |
| if (l == 0x20) |
| j--; |
| targ[j] = 0; |
| } |
| |
| static int xl(char *buf, int offs) |
| { |
| int v, k; |
| |
| v = 0; |
| for (k = 0; k < 4; k++) |
| v = v * 256 + (buf[k + offs] & 0xff); |
| return v; |
| } |
| |
| static void pf_get_capacity(struct pf_unit *pf) |
| { |
| char rc_cmd[12] = { ATAPI_CAPACITY, pf->lun << 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; |
| char buf[8]; |
| int bs; |
| |
| if (pf_atapi(pf, rc_cmd, 8, buf, "get capacity")) { |
| pf->media_status = PF_NM; |
| return; |
| } |
| set_capacity(pf->disk, xl(buf, 0) + 1); |
| bs = xl(buf, 4); |
| if (bs != 512) { |
| set_capacity(pf->disk, 0); |
| if (verbose) |
| printk("%s: Drive %d, LUN %d," |
| " unsupported block size %d\n", |
| pf->name, pf->drive, pf->lun, bs); |
| } |
| } |
| |
| static int pf_identify(struct pf_unit *pf) |
| { |
| int dt, s; |
| char *ms[2] = { "master", "slave" }; |
| char mf[10], id[18]; |
| char id_cmd[12] = |
| { ATAPI_IDENTIFY, pf->lun << 5, 0, 0, 36, 0, 0, 0, 0, 0, 0, 0 }; |
| char buf[36]; |
| |
| s = pf_atapi(pf, id_cmd, 36, buf, "identify"); |
| if (s) |
| return -1; |
| |
| dt = buf[0] & 0x1f; |
| if ((dt != 0) && (dt != 7)) { |
| if (verbose) |
| printk("%s: Drive %d, LUN %d, unsupported type %d\n", |
| pf->name, pf->drive, pf->lun, dt); |
| return -1; |
| } |
| |
| xs(buf, mf, 8, 8); |
| xs(buf, id, 16, 16); |
| |
| pf->removable = (buf[1] & 0x80); |
| |
| pf_mode_sense(pf); |
| pf_mode_sense(pf); |
| pf_mode_sense(pf); |
| |
| pf_get_capacity(pf); |
| |
| printk("%s: %s %s, %s LUN %d, type %d", |
| pf->name, mf, id, ms[pf->drive], pf->lun, dt); |
| if (pf->removable) |
| printk(", removable"); |
| if (pf->media_status == PF_NM) |
| printk(", no media\n"); |
| else { |
| if (pf->media_status == PF_RO) |
| printk(", RO"); |
| printk(", %llu blocks\n", |
| (unsigned long long)get_capacity(pf->disk)); |
| } |
| return 0; |
| } |
| |
| /* returns 0, with id set if drive is detected |
| -1, if drive detection failed |
| */ |
| static int pf_probe(struct pf_unit *pf) |
| { |
| if (pf->drive == -1) { |
| for (pf->drive = 0; pf->drive <= 1; pf->drive++) |
| if (!pf_reset(pf)) { |
| if (pf->lun != -1) |
| return pf_identify(pf); |
| else |
| for (pf->lun = 0; pf->lun < 8; pf->lun++) |
| if (!pf_identify(pf)) |
| return 0; |
| } |
| } else { |
| if (pf_reset(pf)) |
| return -1; |
| if (pf->lun != -1) |
| return pf_identify(pf); |
| for (pf->lun = 0; pf->lun < 8; pf->lun++) |
| if (!pf_identify(pf)) |
| return 0; |
| } |
| return -1; |
| } |
| |
| static int pf_detect(void) |
| { |
| struct pf_unit *pf = units; |
| int k, unit; |
| |
| printk("%s: %s version %s, major %d, cluster %d, nice %d\n", |
| name, name, PF_VERSION, major, cluster, nice); |
| |
| par_drv = pi_register_driver(name); |
| if (!par_drv) { |
| pr_err("failed to register %s driver\n", name); |
| return -1; |
| } |
| k = 0; |
| if (pf_drive_count == 0) { |
| if (pi_init(pf->pi, 1, -1, -1, -1, -1, -1, pf_scratch, PI_PF, |
| verbose, pf->name)) { |
| if (!pf_probe(pf) && pf->disk) { |
| pf->present = 1; |
| k++; |
| } else |
| pi_release(pf->pi); |
| } |
| |
| } else |
| for (unit = 0; unit < PF_UNITS; unit++, pf++) { |
| int *conf = *drives[unit]; |
| if (!conf[D_PRT]) |
| continue; |
| if (pi_init(pf->pi, 0, conf[D_PRT], conf[D_MOD], |
| conf[D_UNI], conf[D_PRO], conf[D_DLY], |
| pf_scratch, PI_PF, verbose, pf->name)) { |
| if (pf->disk && !pf_probe(pf)) { |
| pf->present = 1; |
| k++; |
| } else |
| pi_release(pf->pi); |
| } |
| } |
| if (k) |
| return 0; |
| |
| printk("%s: No ATAPI disk detected\n", name); |
| for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++) { |
| blk_cleanup_queue(pf->disk->queue); |
| pf->disk->queue = NULL; |
| blk_mq_free_tag_set(&pf->tag_set); |
| put_disk(pf->disk); |
| } |
| pi_unregister_driver(par_drv); |
| return -1; |
| } |
| |
| /* The i/o request engine */ |
| |
| static int pf_start(struct pf_unit *pf, int cmd, int b, int c) |
| { |
| int i; |
| char io_cmd[12] = { cmd, pf->lun << 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; |
| |
| for (i = 0; i < 4; i++) { |
| io_cmd[5 - i] = b & 0xff; |
| b = b >> 8; |
| } |
| |
| io_cmd[8] = c & 0xff; |
| io_cmd[7] = (c >> 8) & 0xff; |
| |
| i = pf_command(pf, io_cmd, c * 512, "start i/o"); |
| |
| mdelay(1); |
| |
| return i; |
| } |
| |
| static int pf_ready(void) |
| { |
| return (((status_reg(pf_current) & (STAT_BUSY | pf_mask)) == pf_mask)); |
| } |
| |
| static int pf_queue; |
| |
| static int set_next_request(void) |
| { |
| struct pf_unit *pf; |
| int old_pos = pf_queue; |
| |
| do { |
| pf = &units[pf_queue]; |
| if (++pf_queue == PF_UNITS) |
| pf_queue = 0; |
| if (pf->present && !list_empty(&pf->rq_list)) { |
| pf_req = list_first_entry(&pf->rq_list, struct request, |
| queuelist); |
| list_del_init(&pf_req->queuelist); |
| blk_mq_start_request(pf_req); |
| break; |
| } |
| } while (pf_queue != old_pos); |
| |
| return pf_req != NULL; |
| } |
| |
| static void pf_end_request(blk_status_t err) |
| { |
| if (!pf_req) |
| return; |
| if (!blk_update_request(pf_req, err, blk_rq_cur_bytes(pf_req))) { |
| __blk_mq_end_request(pf_req, err); |
| pf_req = NULL; |
| } |
| } |
| |
| static void pf_request(void) |
| { |
| if (pf_busy) |
| return; |
| repeat: |
| if (!pf_req && !set_next_request()) |
| return; |
| |
| pf_current = pf_req->rq_disk->private_data; |
| pf_block = blk_rq_pos(pf_req); |
| pf_run = blk_rq_sectors(pf_req); |
| pf_count = blk_rq_cur_sectors(pf_req); |
| |
| if (pf_block + pf_count > get_capacity(pf_req->rq_disk)) { |
| pf_end_request(BLK_STS_IOERR); |
| goto repeat; |
| } |
| |
| pf_cmd = rq_data_dir(pf_req); |
| pf_buf = bio_data(pf_req->bio); |
| pf_retries = 0; |
| |
| pf_busy = 1; |
| if (pf_cmd == READ) |
| pi_do_claimed(pf_current->pi, do_pf_read); |
| else if (pf_cmd == WRITE) |
| pi_do_claimed(pf_current->pi, do_pf_write); |
| else { |
| pf_busy = 0; |
| pf_end_request(BLK_STS_IOERR); |
| goto repeat; |
| } |
| } |
| |
| static blk_status_t pf_queue_rq(struct blk_mq_hw_ctx *hctx, |
| const struct blk_mq_queue_data *bd) |
| { |
| struct pf_unit *pf = hctx->queue->queuedata; |
| |
| spin_lock_irq(&pf_spin_lock); |
| list_add_tail(&bd->rq->queuelist, &pf->rq_list); |
| pf_request(); |
| spin_unlock_irq(&pf_spin_lock); |
| |
| return BLK_STS_OK; |
| } |
| |
| static int pf_next_buf(void) |
| { |
| unsigned long saved_flags; |
| |
| pf_count--; |
| pf_run--; |
| pf_buf += 512; |
| pf_block++; |
| if (!pf_run) |
| return 1; |
| if (!pf_count) { |
| spin_lock_irqsave(&pf_spin_lock, saved_flags); |
| pf_end_request(0); |
| spin_unlock_irqrestore(&pf_spin_lock, saved_flags); |
| if (!pf_req) |
| return 1; |
| pf_count = blk_rq_cur_sectors(pf_req); |
| pf_buf = bio_data(pf_req->bio); |
| } |
| return 0; |
| } |
| |
| static inline void next_request(blk_status_t err) |
| { |
| unsigned long saved_flags; |
| |
| spin_lock_irqsave(&pf_spin_lock, saved_flags); |
| pf_end_request(err); |
| pf_busy = 0; |
| pf_request(); |
| spin_unlock_irqrestore(&pf_spin_lock, saved_flags); |
| } |
| |
| /* detach from the calling context - in case the spinlock is held */ |
| static void do_pf_read(void) |
| { |
| ps_set_intr(do_pf_read_start, NULL, 0, nice); |
| } |
| |
| static void do_pf_read_start(void) |
| { |
| pf_busy = 1; |
| |
| if (pf_start(pf_current, ATAPI_READ_10, pf_block, pf_run)) { |
| pi_disconnect(pf_current->pi); |
| if (pf_retries < PF_MAX_RETRIES) { |
| pf_retries++; |
| pi_do_claimed(pf_current->pi, do_pf_read_start); |
| return; |
| } |
| next_request(BLK_STS_IOERR); |
| return; |
| } |
| pf_mask = STAT_DRQ; |
| ps_set_intr(do_pf_read_drq, pf_ready, PF_TMO, nice); |
| } |
| |
| static void do_pf_read_drq(void) |
| { |
| while (1) { |
| if (pf_wait(pf_current, STAT_BUSY, STAT_DRQ | STAT_ERR, |
| "read block", "completion") & STAT_ERR) { |
| pi_disconnect(pf_current->pi); |
| if (pf_retries < PF_MAX_RETRIES) { |
| pf_req_sense(pf_current, 0); |
| pf_retries++; |
| pi_do_claimed(pf_current->pi, do_pf_read_start); |
| return; |
| } |
| next_request(BLK_STS_IOERR); |
| return; |
| } |
| pi_read_block(pf_current->pi, pf_buf, 512); |
| if (pf_next_buf()) |
| break; |
| } |
| pi_disconnect(pf_current->pi); |
| next_request(0); |
| } |
| |
| static void do_pf_write(void) |
| { |
| ps_set_intr(do_pf_write_start, NULL, 0, nice); |
| } |
| |
| static void do_pf_write_start(void) |
| { |
| pf_busy = 1; |
| |
| if (pf_start(pf_current, ATAPI_WRITE_10, pf_block, pf_run)) { |
| pi_disconnect(pf_current->pi); |
| if (pf_retries < PF_MAX_RETRIES) { |
| pf_retries++; |
| pi_do_claimed(pf_current->pi, do_pf_write_start); |
| return; |
| } |
| next_request(BLK_STS_IOERR); |
| return; |
| } |
| |
| while (1) { |
| if (pf_wait(pf_current, STAT_BUSY, STAT_DRQ | STAT_ERR, |
| "write block", "data wait") & STAT_ERR) { |
| pi_disconnect(pf_current->pi); |
| if (pf_retries < PF_MAX_RETRIES) { |
| pf_retries++; |
| pi_do_claimed(pf_current->pi, do_pf_write_start); |
| return; |
| } |
| next_request(BLK_STS_IOERR); |
| return; |
| } |
| pi_write_block(pf_current->pi, pf_buf, 512); |
| if (pf_next_buf()) |
| break; |
| } |
| pf_mask = 0; |
| ps_set_intr(do_pf_write_done, pf_ready, PF_TMO, nice); |
| } |
| |
| static void do_pf_write_done(void) |
| { |
| if (pf_wait(pf_current, STAT_BUSY, 0, "write block", "done") & STAT_ERR) { |
| pi_disconnect(pf_current->pi); |
| if (pf_retries < PF_MAX_RETRIES) { |
| pf_retries++; |
| pi_do_claimed(pf_current->pi, do_pf_write_start); |
| return; |
| } |
| next_request(BLK_STS_IOERR); |
| return; |
| } |
| pi_disconnect(pf_current->pi); |
| next_request(0); |
| } |
| |
| static int __init pf_init(void) |
| { /* preliminary initialisation */ |
| struct pf_unit *pf; |
| int unit; |
| |
| if (disable) |
| return -EINVAL; |
| |
| pf_init_units(); |
| |
| if (pf_detect()) |
| return -ENODEV; |
| pf_busy = 0; |
| |
| if (register_blkdev(major, name)) { |
| for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++) |
| put_disk(pf->disk); |
| return -EBUSY; |
| } |
| |
| for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++) { |
| struct gendisk *disk = pf->disk; |
| |
| if (!pf->present) |
| continue; |
| disk->private_data = pf; |
| add_disk(disk); |
| } |
| return 0; |
| } |
| |
| static void __exit pf_exit(void) |
| { |
| struct pf_unit *pf; |
| int unit; |
| unregister_blkdev(major, name); |
| for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++) { |
| if (pf->present) |
| del_gendisk(pf->disk); |
| |
| blk_cleanup_queue(pf->disk->queue); |
| blk_mq_free_tag_set(&pf->tag_set); |
| put_disk(pf->disk); |
| |
| if (pf->present) |
| pi_release(pf->pi); |
| } |
| } |
| |
| MODULE_LICENSE("GPL"); |
| module_init(pf_init) |
| module_exit(pf_exit) |