| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Toshiba Visconti pulse-width-modulation controller driver |
| * |
| * Copyright (c) 2020 - 2021 TOSHIBA CORPORATION |
| * Copyright (c) 2020 - 2021 Toshiba Electronic Devices & Storage Corporation |
| * |
| * Authors: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> |
| * |
| * Limitations: |
| * - The fixed input clock is running at 1 MHz and is divided by either 1, |
| * 2, 4 or 8. |
| * - When the settings of the PWM are modified, the new values are shadowed |
| * in hardware until the PIPGM_PCSR register is written and the currently |
| * running period is completed. This way the hardware switches atomically |
| * from the old setting to the new. |
| * - Disabling the hardware completes the currently running period and keeps |
| * the output at low level at all times. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/pwm.h> |
| |
| #define PIPGM_PCSR(ch) (0x400 + 4 * (ch)) |
| #define PIPGM_PDUT(ch) (0x420 + 4 * (ch)) |
| #define PIPGM_PWMC(ch) (0x440 + 4 * (ch)) |
| |
| #define PIPGM_PWMC_PWMACT BIT(5) |
| #define PIPGM_PWMC_CLK_MASK GENMASK(1, 0) |
| #define PIPGM_PWMC_POLARITY_MASK GENMASK(5, 5) |
| |
| struct visconti_pwm_chip { |
| struct pwm_chip chip; |
| void __iomem *base; |
| }; |
| |
| static inline struct visconti_pwm_chip *visconti_pwm_from_chip(struct pwm_chip *chip) |
| { |
| return container_of(chip, struct visconti_pwm_chip, chip); |
| } |
| |
| static int visconti_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, |
| const struct pwm_state *state) |
| { |
| struct visconti_pwm_chip *priv = visconti_pwm_from_chip(chip); |
| u32 period, duty_cycle, pwmc0; |
| |
| if (!state->enabled) { |
| writel(0, priv->base + PIPGM_PCSR(pwm->hwpwm)); |
| return 0; |
| } |
| |
| /* |
| * The biggest period the hardware can provide is |
| * (0xffff << 3) * 1000 ns |
| * This value fits easily in an u32, so simplify the maths by |
| * capping the values to 32 bit integers. |
| */ |
| if (state->period > (0xffff << 3) * 1000) |
| period = (0xffff << 3) * 1000; |
| else |
| period = state->period; |
| |
| if (state->duty_cycle > period) |
| duty_cycle = period; |
| else |
| duty_cycle = state->duty_cycle; |
| |
| /* |
| * The input clock runs fixed at 1 MHz, so we have only |
| * microsecond resolution and so can divide by |
| * NSEC_PER_SEC / CLKFREQ = 1000 without losing precision. |
| */ |
| period /= 1000; |
| duty_cycle /= 1000; |
| |
| if (!period) |
| return -ERANGE; |
| |
| /* |
| * PWMC controls a divider that divides the input clk by a |
| * power of two between 1 and 8. As a smaller divider yields |
| * higher precision, pick the smallest possible one. |
| */ |
| if (period > 0xffff) { |
| pwmc0 = ilog2(period >> 16); |
| if (WARN_ON(pwmc0 > 3)) |
| return -EINVAL; |
| } else { |
| pwmc0 = 0; |
| } |
| |
| period >>= pwmc0; |
| duty_cycle >>= pwmc0; |
| |
| if (state->polarity == PWM_POLARITY_INVERSED) |
| pwmc0 |= PIPGM_PWMC_PWMACT; |
| writel(pwmc0, priv->base + PIPGM_PWMC(pwm->hwpwm)); |
| writel(duty_cycle, priv->base + PIPGM_PDUT(pwm->hwpwm)); |
| writel(period, priv->base + PIPGM_PCSR(pwm->hwpwm)); |
| |
| return 0; |
| } |
| |
| static void visconti_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm, |
| struct pwm_state *state) |
| { |
| struct visconti_pwm_chip *priv = visconti_pwm_from_chip(chip); |
| u32 period, duty, pwmc0, pwmc0_clk; |
| |
| period = readl(priv->base + PIPGM_PCSR(pwm->hwpwm)); |
| duty = readl(priv->base + PIPGM_PDUT(pwm->hwpwm)); |
| pwmc0 = readl(priv->base + PIPGM_PWMC(pwm->hwpwm)); |
| pwmc0_clk = pwmc0 & PIPGM_PWMC_CLK_MASK; |
| |
| state->period = (period << pwmc0_clk) * NSEC_PER_USEC; |
| state->duty_cycle = (duty << pwmc0_clk) * NSEC_PER_USEC; |
| if (pwmc0 & PIPGM_PWMC_POLARITY_MASK) |
| state->polarity = PWM_POLARITY_INVERSED; |
| else |
| state->polarity = PWM_POLARITY_NORMAL; |
| |
| state->enabled = true; |
| } |
| |
| static const struct pwm_ops visconti_pwm_ops = { |
| .apply = visconti_pwm_apply, |
| .get_state = visconti_pwm_get_state, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int visconti_pwm_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct visconti_pwm_chip *priv; |
| int ret; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(priv->base)) |
| return PTR_ERR(priv->base); |
| |
| platform_set_drvdata(pdev, priv); |
| |
| priv->chip.dev = dev; |
| priv->chip.ops = &visconti_pwm_ops; |
| priv->chip.npwm = 4; |
| |
| ret = pwmchip_add(&priv->chip); |
| if (ret < 0) |
| return dev_err_probe(&pdev->dev, ret, "Cannot register visconti PWM\n"); |
| |
| return 0; |
| } |
| |
| static int visconti_pwm_remove(struct platform_device *pdev) |
| { |
| struct visconti_pwm_chip *priv = platform_get_drvdata(pdev); |
| |
| pwmchip_remove(&priv->chip); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id visconti_pwm_of_match[] = { |
| { .compatible = "toshiba,visconti-pwm", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, visconti_pwm_of_match); |
| |
| static struct platform_driver visconti_pwm_driver = { |
| .driver = { |
| .name = "pwm-visconti", |
| .of_match_table = visconti_pwm_of_match, |
| }, |
| .probe = visconti_pwm_probe, |
| .remove = visconti_pwm_remove, |
| }; |
| module_platform_driver(visconti_pwm_driver); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>"); |
| MODULE_ALIAS("platform:pwm-visconti"); |