| /* |
| * Copyright (C) 2005 Intel Corporation |
| * Copyright (C) 2009 Hewlett-Packard Development Company, L.P. |
| * |
| * Alex Chiang <achiang@hp.com> |
| * - Unified x86/ia64 implementations |
| * |
| * I/O APIC hotplug support |
| * Yinghai Lu <yinghai@kernel.org> |
| * Jiang Liu <jiang.liu@intel.com> |
| */ |
| #include <linux/export.h> |
| #include <linux/acpi.h> |
| #include <acpi/processor.h> |
| |
| #define _COMPONENT ACPI_PROCESSOR_COMPONENT |
| ACPI_MODULE_NAME("processor_core"); |
| |
| static struct acpi_table_madt *get_madt_table(void) |
| { |
| static struct acpi_table_madt *madt; |
| static int read_madt; |
| |
| if (!read_madt) { |
| if (ACPI_FAILURE(acpi_get_table(ACPI_SIG_MADT, 0, |
| (struct acpi_table_header **)&madt))) |
| madt = NULL; |
| read_madt++; |
| } |
| |
| return madt; |
| } |
| |
| static int map_lapic_id(struct acpi_subtable_header *entry, |
| u32 acpi_id, phys_cpuid_t *apic_id, bool ignore_disabled) |
| { |
| struct acpi_madt_local_apic *lapic = |
| container_of(entry, struct acpi_madt_local_apic, header); |
| |
| if (ignore_disabled && !(lapic->lapic_flags & ACPI_MADT_ENABLED)) |
| return -ENODEV; |
| |
| if (lapic->processor_id != acpi_id) |
| return -EINVAL; |
| |
| *apic_id = lapic->id; |
| return 0; |
| } |
| |
| static int map_x2apic_id(struct acpi_subtable_header *entry, |
| int device_declaration, u32 acpi_id, phys_cpuid_t *apic_id, |
| bool ignore_disabled) |
| { |
| struct acpi_madt_local_x2apic *apic = |
| container_of(entry, struct acpi_madt_local_x2apic, header); |
| |
| if (ignore_disabled && !(apic->lapic_flags & ACPI_MADT_ENABLED)) |
| return -ENODEV; |
| |
| if (device_declaration && (apic->uid == acpi_id)) { |
| *apic_id = apic->local_apic_id; |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int map_lsapic_id(struct acpi_subtable_header *entry, |
| int device_declaration, u32 acpi_id, phys_cpuid_t *apic_id, |
| bool ignore_disabled) |
| { |
| struct acpi_madt_local_sapic *lsapic = |
| container_of(entry, struct acpi_madt_local_sapic, header); |
| |
| if (ignore_disabled && !(lsapic->lapic_flags & ACPI_MADT_ENABLED)) |
| return -ENODEV; |
| |
| if (device_declaration) { |
| if ((entry->length < 16) || (lsapic->uid != acpi_id)) |
| return -EINVAL; |
| } else if (lsapic->processor_id != acpi_id) |
| return -EINVAL; |
| |
| *apic_id = (lsapic->id << 8) | lsapic->eid; |
| return 0; |
| } |
| |
| /* |
| * Retrieve the ARM CPU physical identifier (MPIDR) |
| */ |
| static int map_gicc_mpidr(struct acpi_subtable_header *entry, |
| int device_declaration, u32 acpi_id, phys_cpuid_t *mpidr, |
| bool ignore_disabled) |
| { |
| struct acpi_madt_generic_interrupt *gicc = |
| container_of(entry, struct acpi_madt_generic_interrupt, header); |
| |
| if (ignore_disabled && !(gicc->flags & ACPI_MADT_ENABLED)) |
| return -ENODEV; |
| |
| /* device_declaration means Device object in DSDT, in the |
| * GIC interrupt model, logical processors are required to |
| * have a Processor Device object in the DSDT, so we should |
| * check device_declaration here |
| */ |
| if (device_declaration && (gicc->uid == acpi_id)) { |
| *mpidr = gicc->arm_mpidr; |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static phys_cpuid_t map_madt_entry(struct acpi_table_madt *madt, |
| int type, u32 acpi_id, bool ignore_disabled) |
| { |
| unsigned long madt_end, entry; |
| phys_cpuid_t phys_id = PHYS_CPUID_INVALID; /* CPU hardware ID */ |
| |
| if (!madt) |
| return phys_id; |
| |
| entry = (unsigned long)madt; |
| madt_end = entry + madt->header.length; |
| |
| /* Parse all entries looking for a match. */ |
| |
| entry += sizeof(struct acpi_table_madt); |
| while (entry + sizeof(struct acpi_subtable_header) < madt_end) { |
| struct acpi_subtable_header *header = |
| (struct acpi_subtable_header *)entry; |
| if (header->type == ACPI_MADT_TYPE_LOCAL_APIC) { |
| if (!map_lapic_id(header, acpi_id, &phys_id, |
| ignore_disabled)) |
| break; |
| } else if (header->type == ACPI_MADT_TYPE_LOCAL_X2APIC) { |
| if (!map_x2apic_id(header, type, acpi_id, &phys_id, |
| ignore_disabled)) |
| break; |
| } else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) { |
| if (!map_lsapic_id(header, type, acpi_id, &phys_id, |
| ignore_disabled)) |
| break; |
| } else if (header->type == ACPI_MADT_TYPE_GENERIC_INTERRUPT) { |
| if (!map_gicc_mpidr(header, type, acpi_id, &phys_id, |
| ignore_disabled)) |
| break; |
| } |
| entry += header->length; |
| } |
| return phys_id; |
| } |
| |
| phys_cpuid_t __init acpi_map_madt_entry(u32 acpi_id) |
| { |
| struct acpi_table_madt *madt = NULL; |
| acpi_size tbl_size; |
| phys_cpuid_t rv; |
| |
| acpi_get_table_with_size(ACPI_SIG_MADT, 0, |
| (struct acpi_table_header **)&madt, |
| &tbl_size); |
| if (!madt) |
| return PHYS_CPUID_INVALID; |
| |
| rv = map_madt_entry(madt, 1, acpi_id, true); |
| |
| early_acpi_os_unmap_memory(madt, tbl_size); |
| |
| return rv; |
| } |
| |
| static phys_cpuid_t map_mat_entry(acpi_handle handle, int type, u32 acpi_id, |
| bool ignore_disabled) |
| { |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; |
| union acpi_object *obj; |
| struct acpi_subtable_header *header; |
| phys_cpuid_t phys_id = PHYS_CPUID_INVALID; |
| |
| if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer))) |
| goto exit; |
| |
| if (!buffer.length || !buffer.pointer) |
| goto exit; |
| |
| obj = buffer.pointer; |
| if (obj->type != ACPI_TYPE_BUFFER || |
| obj->buffer.length < sizeof(struct acpi_subtable_header)) { |
| goto exit; |
| } |
| |
| header = (struct acpi_subtable_header *)obj->buffer.pointer; |
| if (header->type == ACPI_MADT_TYPE_LOCAL_APIC) |
| map_lapic_id(header, acpi_id, &phys_id, ignore_disabled); |
| else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) |
| map_lsapic_id(header, type, acpi_id, &phys_id, ignore_disabled); |
| else if (header->type == ACPI_MADT_TYPE_LOCAL_X2APIC) |
| map_x2apic_id(header, type, acpi_id, &phys_id, ignore_disabled); |
| else if (header->type == ACPI_MADT_TYPE_GENERIC_INTERRUPT) |
| map_gicc_mpidr(header, type, acpi_id, &phys_id, |
| ignore_disabled); |
| |
| exit: |
| kfree(buffer.pointer); |
| return phys_id; |
| } |
| |
| static phys_cpuid_t __acpi_get_phys_id(acpi_handle handle, int type, |
| u32 acpi_id, bool ignore_disabled) |
| { |
| phys_cpuid_t phys_id; |
| |
| phys_id = map_mat_entry(handle, type, acpi_id, ignore_disabled); |
| if (invalid_phys_cpuid(phys_id)) |
| phys_id = map_madt_entry(get_madt_table(), type, acpi_id, |
| ignore_disabled); |
| |
| return phys_id; |
| } |
| |
| phys_cpuid_t acpi_get_phys_id(acpi_handle handle, int type, u32 acpi_id) |
| { |
| return __acpi_get_phys_id(handle, type, acpi_id, true); |
| } |
| |
| int acpi_map_cpuid(phys_cpuid_t phys_id, u32 acpi_id) |
| { |
| #ifdef CONFIG_SMP |
| int i; |
| #endif |
| |
| if (invalid_phys_cpuid(phys_id)) { |
| /* |
| * On UP processor, there is no _MAT or MADT table. |
| * So above phys_id is always set to PHYS_CPUID_INVALID. |
| * |
| * BIOS may define multiple CPU handles even for UP processor. |
| * For example, |
| * |
| * Scope (_PR) |
| * { |
| * Processor (CPU0, 0x00, 0x00000410, 0x06) {} |
| * Processor (CPU1, 0x01, 0x00000410, 0x06) {} |
| * Processor (CPU2, 0x02, 0x00000410, 0x06) {} |
| * Processor (CPU3, 0x03, 0x00000410, 0x06) {} |
| * } |
| * |
| * Ignores phys_id and always returns 0 for the processor |
| * handle with acpi id 0 if nr_cpu_ids is 1. |
| * This should be the case if SMP tables are not found. |
| * Return -EINVAL for other CPU's handle. |
| */ |
| if (nr_cpu_ids <= 1 && acpi_id == 0) |
| return acpi_id; |
| else |
| return -EINVAL; |
| } |
| |
| #ifdef CONFIG_SMP |
| for_each_possible_cpu(i) { |
| if (cpu_physical_id(i) == phys_id) |
| return i; |
| } |
| #else |
| /* In UP kernel, only processor 0 is valid */ |
| if (phys_id == 0) |
| return phys_id; |
| #endif |
| return -ENODEV; |
| } |
| |
| int acpi_get_cpuid(acpi_handle handle, int type, u32 acpi_id) |
| { |
| phys_cpuid_t phys_id; |
| |
| phys_id = acpi_get_phys_id(handle, type, acpi_id); |
| |
| return acpi_map_cpuid(phys_id, acpi_id); |
| } |
| EXPORT_SYMBOL_GPL(acpi_get_cpuid); |
| |
| #ifdef CONFIG_ACPI_HOTPLUG_CPU |
| static bool __init |
| map_processor(acpi_handle handle, phys_cpuid_t *phys_id, int *cpuid) |
| { |
| int type, id; |
| u32 acpi_id; |
| acpi_status status; |
| acpi_object_type acpi_type; |
| unsigned long long tmp; |
| union acpi_object object = { 0 }; |
| struct acpi_buffer buffer = { sizeof(union acpi_object), &object }; |
| |
| status = acpi_get_type(handle, &acpi_type); |
| if (ACPI_FAILURE(status)) |
| return false; |
| |
| switch (acpi_type) { |
| case ACPI_TYPE_PROCESSOR: |
| status = acpi_evaluate_object(handle, NULL, NULL, &buffer); |
| if (ACPI_FAILURE(status)) |
| return false; |
| acpi_id = object.processor.proc_id; |
| |
| /* validate the acpi_id */ |
| if(acpi_processor_validate_proc_id(acpi_id)) |
| return false; |
| break; |
| case ACPI_TYPE_DEVICE: |
| status = acpi_evaluate_integer(handle, "_UID", NULL, &tmp); |
| if (ACPI_FAILURE(status)) |
| return false; |
| acpi_id = tmp; |
| break; |
| default: |
| return false; |
| } |
| |
| type = (acpi_type == ACPI_TYPE_DEVICE) ? 1 : 0; |
| |
| *phys_id = __acpi_get_phys_id(handle, type, acpi_id, false); |
| id = acpi_map_cpuid(*phys_id, acpi_id); |
| |
| if (id < 0) |
| return false; |
| *cpuid = id; |
| return true; |
| } |
| |
| static acpi_status __init |
| set_processor_node_mapping(acpi_handle handle, u32 lvl, void *context, |
| void **rv) |
| { |
| phys_cpuid_t phys_id; |
| int cpu_id; |
| |
| if (!map_processor(handle, &phys_id, &cpu_id)) |
| return AE_ERROR; |
| |
| acpi_map_cpu2node(handle, cpu_id, phys_id); |
| return AE_OK; |
| } |
| |
| void __init acpi_set_processor_mapping(void) |
| { |
| /* Set persistent cpu <-> node mapping for all processors. */ |
| acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, |
| ACPI_UINT32_MAX, set_processor_node_mapping, |
| NULL, NULL, NULL); |
| } |
| #else |
| void __init acpi_set_processor_mapping(void) {} |
| #endif /* CONFIG_ACPI_HOTPLUG_CPU */ |
| |
| #ifdef CONFIG_ACPI_HOTPLUG_IOAPIC |
| static int get_ioapic_id(struct acpi_subtable_header *entry, u32 gsi_base, |
| u64 *phys_addr, int *ioapic_id) |
| { |
| struct acpi_madt_io_apic *ioapic = (struct acpi_madt_io_apic *)entry; |
| |
| if (ioapic->global_irq_base != gsi_base) |
| return 0; |
| |
| *phys_addr = ioapic->address; |
| *ioapic_id = ioapic->id; |
| return 1; |
| } |
| |
| static int parse_madt_ioapic_entry(u32 gsi_base, u64 *phys_addr) |
| { |
| struct acpi_subtable_header *hdr; |
| unsigned long madt_end, entry; |
| struct acpi_table_madt *madt; |
| int apic_id = -1; |
| |
| madt = get_madt_table(); |
| if (!madt) |
| return apic_id; |
| |
| entry = (unsigned long)madt; |
| madt_end = entry + madt->header.length; |
| |
| /* Parse all entries looking for a match. */ |
| entry += sizeof(struct acpi_table_madt); |
| while (entry + sizeof(struct acpi_subtable_header) < madt_end) { |
| hdr = (struct acpi_subtable_header *)entry; |
| if (hdr->type == ACPI_MADT_TYPE_IO_APIC && |
| get_ioapic_id(hdr, gsi_base, phys_addr, &apic_id)) |
| break; |
| else |
| entry += hdr->length; |
| } |
| |
| return apic_id; |
| } |
| |
| static int parse_mat_ioapic_entry(acpi_handle handle, u32 gsi_base, |
| u64 *phys_addr) |
| { |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; |
| struct acpi_subtable_header *header; |
| union acpi_object *obj; |
| int apic_id = -1; |
| |
| if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer))) |
| goto exit; |
| |
| if (!buffer.length || !buffer.pointer) |
| goto exit; |
| |
| obj = buffer.pointer; |
| if (obj->type != ACPI_TYPE_BUFFER || |
| obj->buffer.length < sizeof(struct acpi_subtable_header)) |
| goto exit; |
| |
| header = (struct acpi_subtable_header *)obj->buffer.pointer; |
| if (header->type == ACPI_MADT_TYPE_IO_APIC) |
| get_ioapic_id(header, gsi_base, phys_addr, &apic_id); |
| |
| exit: |
| kfree(buffer.pointer); |
| return apic_id; |
| } |
| |
| /** |
| * acpi_get_ioapic_id - Get IOAPIC ID and physical address matching @gsi_base |
| * @handle: ACPI object for IOAPIC device |
| * @gsi_base: GSI base to match with |
| * @phys_addr: Pointer to store physical address of matching IOAPIC record |
| * |
| * Walk resources returned by ACPI_MAT method, then ACPI MADT table, to search |
| * for an ACPI IOAPIC record matching @gsi_base. |
| * Return IOAPIC id and store physical address in @phys_addr if found a match, |
| * otherwise return <0. |
| */ |
| int acpi_get_ioapic_id(acpi_handle handle, u32 gsi_base, u64 *phys_addr) |
| { |
| int apic_id; |
| |
| apic_id = parse_mat_ioapic_entry(handle, gsi_base, phys_addr); |
| if (apic_id == -1) |
| apic_id = parse_madt_ioapic_entry(gsi_base, phys_addr); |
| |
| return apic_id; |
| } |
| #endif /* CONFIG_ACPI_HOTPLUG_IOAPIC */ |