| /* |
| * rcar_du_crtc.c -- R-Car Display Unit CRTCs |
| * |
| * Copyright (C) 2013-2015 Renesas Electronics Corporation |
| * |
| * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/mutex.h> |
| |
| #include <drm/drmP.h> |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <drm/drm_fb_cma_helper.h> |
| #include <drm/drm_gem_cma_helper.h> |
| #include <drm/drm_plane_helper.h> |
| |
| #include "rcar_du_crtc.h" |
| #include "rcar_du_drv.h" |
| #include "rcar_du_kms.h" |
| #include "rcar_du_plane.h" |
| #include "rcar_du_regs.h" |
| #include "rcar_du_vsp.h" |
| |
| static u32 rcar_du_crtc_read(struct rcar_du_crtc *rcrtc, u32 reg) |
| { |
| struct rcar_du_device *rcdu = rcrtc->group->dev; |
| |
| return rcar_du_read(rcdu, rcrtc->mmio_offset + reg); |
| } |
| |
| static void rcar_du_crtc_write(struct rcar_du_crtc *rcrtc, u32 reg, u32 data) |
| { |
| struct rcar_du_device *rcdu = rcrtc->group->dev; |
| |
| rcar_du_write(rcdu, rcrtc->mmio_offset + reg, data); |
| } |
| |
| static void rcar_du_crtc_clr(struct rcar_du_crtc *rcrtc, u32 reg, u32 clr) |
| { |
| struct rcar_du_device *rcdu = rcrtc->group->dev; |
| |
| rcar_du_write(rcdu, rcrtc->mmio_offset + reg, |
| rcar_du_read(rcdu, rcrtc->mmio_offset + reg) & ~clr); |
| } |
| |
| static void rcar_du_crtc_set(struct rcar_du_crtc *rcrtc, u32 reg, u32 set) |
| { |
| struct rcar_du_device *rcdu = rcrtc->group->dev; |
| |
| rcar_du_write(rcdu, rcrtc->mmio_offset + reg, |
| rcar_du_read(rcdu, rcrtc->mmio_offset + reg) | set); |
| } |
| |
| static void rcar_du_crtc_clr_set(struct rcar_du_crtc *rcrtc, u32 reg, |
| u32 clr, u32 set) |
| { |
| struct rcar_du_device *rcdu = rcrtc->group->dev; |
| u32 value = rcar_du_read(rcdu, rcrtc->mmio_offset + reg); |
| |
| rcar_du_write(rcdu, rcrtc->mmio_offset + reg, (value & ~clr) | set); |
| } |
| |
| static int rcar_du_crtc_get(struct rcar_du_crtc *rcrtc) |
| { |
| int ret; |
| |
| ret = clk_prepare_enable(rcrtc->clock); |
| if (ret < 0) |
| return ret; |
| |
| ret = clk_prepare_enable(rcrtc->extclock); |
| if (ret < 0) |
| goto error_clock; |
| |
| ret = rcar_du_group_get(rcrtc->group); |
| if (ret < 0) |
| goto error_group; |
| |
| return 0; |
| |
| error_group: |
| clk_disable_unprepare(rcrtc->extclock); |
| error_clock: |
| clk_disable_unprepare(rcrtc->clock); |
| return ret; |
| } |
| |
| static void rcar_du_crtc_put(struct rcar_du_crtc *rcrtc) |
| { |
| rcar_du_group_put(rcrtc->group); |
| |
| clk_disable_unprepare(rcrtc->extclock); |
| clk_disable_unprepare(rcrtc->clock); |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Hardware Setup |
| */ |
| |
| static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc) |
| { |
| const struct drm_display_mode *mode = &rcrtc->crtc.state->adjusted_mode; |
| unsigned long mode_clock = mode->clock * 1000; |
| unsigned long clk; |
| u32 value; |
| u32 escr; |
| u32 div; |
| |
| /* Compute the clock divisor and select the internal or external dot |
| * clock based on the requested frequency. |
| */ |
| clk = clk_get_rate(rcrtc->clock); |
| div = DIV_ROUND_CLOSEST(clk, mode_clock); |
| div = clamp(div, 1U, 64U) - 1; |
| escr = div | ESCR_DCLKSEL_CLKS; |
| |
| if (rcrtc->extclock) { |
| unsigned long extclk; |
| unsigned long extrate; |
| unsigned long rate; |
| u32 extdiv; |
| |
| extclk = clk_get_rate(rcrtc->extclock); |
| extdiv = DIV_ROUND_CLOSEST(extclk, mode_clock); |
| extdiv = clamp(extdiv, 1U, 64U) - 1; |
| |
| rate = clk / (div + 1); |
| extrate = extclk / (extdiv + 1); |
| |
| if (abs((long)extrate - (long)mode_clock) < |
| abs((long)rate - (long)mode_clock)) { |
| dev_dbg(rcrtc->group->dev->dev, |
| "crtc%u: using external clock\n", rcrtc->index); |
| escr = extdiv | ESCR_DCLKSEL_DCLKIN; |
| } |
| } |
| |
| rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? ESCR2 : ESCR, |
| escr); |
| rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? OTAR2 : OTAR, 0); |
| |
| /* Signal polarities */ |
| value = ((mode->flags & DRM_MODE_FLAG_PVSYNC) ? 0 : DSMR_VSL) |
| | ((mode->flags & DRM_MODE_FLAG_PHSYNC) ? 0 : DSMR_HSL) |
| | DSMR_DIPM_DISP | DSMR_CSPM; |
| rcar_du_crtc_write(rcrtc, DSMR, value); |
| |
| /* Display timings */ |
| rcar_du_crtc_write(rcrtc, HDSR, mode->htotal - mode->hsync_start - 19); |
| rcar_du_crtc_write(rcrtc, HDER, mode->htotal - mode->hsync_start + |
| mode->hdisplay - 19); |
| rcar_du_crtc_write(rcrtc, HSWR, mode->hsync_end - |
| mode->hsync_start - 1); |
| rcar_du_crtc_write(rcrtc, HCR, mode->htotal - 1); |
| |
| rcar_du_crtc_write(rcrtc, VDSR, mode->crtc_vtotal - |
| mode->crtc_vsync_end - 2); |
| rcar_du_crtc_write(rcrtc, VDER, mode->crtc_vtotal - |
| mode->crtc_vsync_end + |
| mode->crtc_vdisplay - 2); |
| rcar_du_crtc_write(rcrtc, VSPR, mode->crtc_vtotal - |
| mode->crtc_vsync_end + |
| mode->crtc_vsync_start - 1); |
| rcar_du_crtc_write(rcrtc, VCR, mode->crtc_vtotal - 1); |
| |
| rcar_du_crtc_write(rcrtc, DESR, mode->htotal - mode->hsync_start); |
| rcar_du_crtc_write(rcrtc, DEWR, mode->hdisplay); |
| } |
| |
| void rcar_du_crtc_route_output(struct drm_crtc *crtc, |
| enum rcar_du_output output) |
| { |
| struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc); |
| struct rcar_du_device *rcdu = rcrtc->group->dev; |
| |
| /* Store the route from the CRTC output to the DU output. The DU will be |
| * configured when starting the CRTC. |
| */ |
| rcrtc->outputs |= BIT(output); |
| |
| /* Store RGB routing to DPAD0, the hardware will be configured when |
| * starting the CRTC. |
| */ |
| if (output == RCAR_DU_OUTPUT_DPAD0) |
| rcdu->dpad0_source = rcrtc->index; |
| } |
| |
| static unsigned int plane_zpos(struct rcar_du_plane *plane) |
| { |
| return plane->plane.state->normalized_zpos; |
| } |
| |
| static const struct rcar_du_format_info * |
| plane_format(struct rcar_du_plane *plane) |
| { |
| return to_rcar_plane_state(plane->plane.state)->format; |
| } |
| |
| static void rcar_du_crtc_update_planes(struct rcar_du_crtc *rcrtc) |
| { |
| struct rcar_du_plane *planes[RCAR_DU_NUM_HW_PLANES]; |
| struct rcar_du_device *rcdu = rcrtc->group->dev; |
| unsigned int num_planes = 0; |
| unsigned int dptsr_planes; |
| unsigned int hwplanes = 0; |
| unsigned int prio = 0; |
| unsigned int i; |
| u32 dspr = 0; |
| |
| for (i = 0; i < rcrtc->group->num_planes; ++i) { |
| struct rcar_du_plane *plane = &rcrtc->group->planes[i]; |
| unsigned int j; |
| |
| if (plane->plane.state->crtc != &rcrtc->crtc) |
| continue; |
| |
| /* Insert the plane in the sorted planes array. */ |
| for (j = num_planes++; j > 0; --j) { |
| if (plane_zpos(planes[j-1]) <= plane_zpos(plane)) |
| break; |
| planes[j] = planes[j-1]; |
| } |
| |
| planes[j] = plane; |
| prio += plane_format(plane)->planes * 4; |
| } |
| |
| for (i = 0; i < num_planes; ++i) { |
| struct rcar_du_plane *plane = planes[i]; |
| struct drm_plane_state *state = plane->plane.state; |
| unsigned int index = to_rcar_plane_state(state)->hwindex; |
| |
| prio -= 4; |
| dspr |= (index + 1) << prio; |
| hwplanes |= 1 << index; |
| |
| if (plane_format(plane)->planes == 2) { |
| index = (index + 1) % 8; |
| |
| prio -= 4; |
| dspr |= (index + 1) << prio; |
| hwplanes |= 1 << index; |
| } |
| } |
| |
| /* If VSP+DU integration is enabled the plane assignment is fixed. */ |
| if (rcar_du_has(rcdu, RCAR_DU_FEATURE_VSP1_SOURCE)) { |
| if (rcdu->info->gen < 3) { |
| dspr = (rcrtc->index % 2) + 1; |
| hwplanes = 1 << (rcrtc->index % 2); |
| } else { |
| dspr = (rcrtc->index % 2) ? 3 : 1; |
| hwplanes = 1 << ((rcrtc->index % 2) ? 2 : 0); |
| } |
| } |
| |
| /* Update the planes to display timing and dot clock generator |
| * associations. |
| * |
| * Updating the DPTSR register requires restarting the CRTC group, |
| * resulting in visible flicker. To mitigate the issue only update the |
| * association if needed by enabled planes. Planes being disabled will |
| * keep their current association. |
| */ |
| mutex_lock(&rcrtc->group->lock); |
| |
| dptsr_planes = rcrtc->index % 2 ? rcrtc->group->dptsr_planes | hwplanes |
| : rcrtc->group->dptsr_planes & ~hwplanes; |
| |
| if (dptsr_planes != rcrtc->group->dptsr_planes) { |
| rcar_du_group_write(rcrtc->group, DPTSR, |
| (dptsr_planes << 16) | dptsr_planes); |
| rcrtc->group->dptsr_planes = dptsr_planes; |
| |
| if (rcrtc->group->used_crtcs) |
| rcar_du_group_restart(rcrtc->group); |
| } |
| |
| /* Restart the group if plane sources have changed. */ |
| if (rcrtc->group->need_restart) |
| rcar_du_group_restart(rcrtc->group); |
| |
| mutex_unlock(&rcrtc->group->lock); |
| |
| rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? DS2PR : DS1PR, |
| dspr); |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Page Flip |
| */ |
| |
| static void rcar_du_crtc_finish_page_flip(struct rcar_du_crtc *rcrtc) |
| { |
| struct drm_pending_vblank_event *event; |
| struct drm_device *dev = rcrtc->crtc.dev; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dev->event_lock, flags); |
| event = rcrtc->event; |
| rcrtc->event = NULL; |
| spin_unlock_irqrestore(&dev->event_lock, flags); |
| |
| if (event == NULL) |
| return; |
| |
| spin_lock_irqsave(&dev->event_lock, flags); |
| drm_crtc_send_vblank_event(&rcrtc->crtc, event); |
| wake_up(&rcrtc->flip_wait); |
| spin_unlock_irqrestore(&dev->event_lock, flags); |
| |
| drm_crtc_vblank_put(&rcrtc->crtc); |
| } |
| |
| static bool rcar_du_crtc_page_flip_pending(struct rcar_du_crtc *rcrtc) |
| { |
| struct drm_device *dev = rcrtc->crtc.dev; |
| unsigned long flags; |
| bool pending; |
| |
| spin_lock_irqsave(&dev->event_lock, flags); |
| pending = rcrtc->event != NULL; |
| spin_unlock_irqrestore(&dev->event_lock, flags); |
| |
| return pending; |
| } |
| |
| static void rcar_du_crtc_wait_page_flip(struct rcar_du_crtc *rcrtc) |
| { |
| struct rcar_du_device *rcdu = rcrtc->group->dev; |
| |
| if (wait_event_timeout(rcrtc->flip_wait, |
| !rcar_du_crtc_page_flip_pending(rcrtc), |
| msecs_to_jiffies(50))) |
| return; |
| |
| dev_warn(rcdu->dev, "page flip timeout\n"); |
| |
| rcar_du_crtc_finish_page_flip(rcrtc); |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Start/Stop and Suspend/Resume |
| */ |
| |
| static void rcar_du_crtc_start(struct rcar_du_crtc *rcrtc) |
| { |
| struct drm_crtc *crtc = &rcrtc->crtc; |
| bool interlaced; |
| |
| if (rcrtc->started) |
| return; |
| |
| /* Set display off and background to black */ |
| rcar_du_crtc_write(rcrtc, DOOR, DOOR_RGB(0, 0, 0)); |
| rcar_du_crtc_write(rcrtc, BPOR, BPOR_RGB(0, 0, 0)); |
| |
| /* Configure display timings and output routing */ |
| rcar_du_crtc_set_display_timing(rcrtc); |
| rcar_du_group_set_routing(rcrtc->group); |
| |
| /* Start with all planes disabled. */ |
| rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? DS2PR : DS1PR, 0); |
| |
| /* Select master sync mode. This enables display operation in master |
| * sync mode (with the HSYNC and VSYNC signals configured as outputs and |
| * actively driven). |
| */ |
| interlaced = rcrtc->crtc.mode.flags & DRM_MODE_FLAG_INTERLACE; |
| rcar_du_crtc_clr_set(rcrtc, DSYSR, DSYSR_TVM_MASK | DSYSR_SCM_MASK, |
| (interlaced ? DSYSR_SCM_INT_VIDEO : 0) | |
| DSYSR_TVM_MASTER); |
| |
| rcar_du_group_start_stop(rcrtc->group, true); |
| |
| /* Enable the VSP compositor. */ |
| if (rcar_du_has(rcrtc->group->dev, RCAR_DU_FEATURE_VSP1_SOURCE)) |
| rcar_du_vsp_enable(rcrtc); |
| |
| /* Turn vertical blanking interrupt reporting back on. */ |
| drm_crtc_vblank_on(crtc); |
| |
| rcrtc->started = true; |
| } |
| |
| static void rcar_du_crtc_stop(struct rcar_du_crtc *rcrtc) |
| { |
| struct drm_crtc *crtc = &rcrtc->crtc; |
| |
| if (!rcrtc->started) |
| return; |
| |
| /* Disable all planes and wait for the change to take effect. This is |
| * required as the DSnPR registers are updated on vblank, and no vblank |
| * will occur once the CRTC is stopped. Disabling planes when starting |
| * the CRTC thus wouldn't be enough as it would start scanning out |
| * immediately from old frame buffers until the next vblank. |
| * |
| * This increases the CRTC stop delay, especially when multiple CRTCs |
| * are stopped in one operation as we now wait for one vblank per CRTC. |
| * Whether this can be improved needs to be researched. |
| */ |
| rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? DS2PR : DS1PR, 0); |
| drm_crtc_wait_one_vblank(crtc); |
| |
| /* Disable vertical blanking interrupt reporting. We first need to wait |
| * for page flip completion before stopping the CRTC as userspace |
| * expects page flips to eventually complete. |
| */ |
| rcar_du_crtc_wait_page_flip(rcrtc); |
| drm_crtc_vblank_off(crtc); |
| |
| /* Disable the VSP compositor. */ |
| if (rcar_du_has(rcrtc->group->dev, RCAR_DU_FEATURE_VSP1_SOURCE)) |
| rcar_du_vsp_disable(rcrtc); |
| |
| /* Select switch sync mode. This stops display operation and configures |
| * the HSYNC and VSYNC signals as inputs. |
| */ |
| rcar_du_crtc_clr_set(rcrtc, DSYSR, DSYSR_TVM_MASK, DSYSR_TVM_SWITCH); |
| |
| rcar_du_group_start_stop(rcrtc->group, false); |
| |
| rcrtc->started = false; |
| } |
| |
| void rcar_du_crtc_suspend(struct rcar_du_crtc *rcrtc) |
| { |
| if (rcar_du_has(rcrtc->group->dev, RCAR_DU_FEATURE_VSP1_SOURCE)) |
| rcar_du_vsp_disable(rcrtc); |
| |
| rcar_du_crtc_stop(rcrtc); |
| rcar_du_crtc_put(rcrtc); |
| } |
| |
| void rcar_du_crtc_resume(struct rcar_du_crtc *rcrtc) |
| { |
| unsigned int i; |
| |
| if (!rcrtc->crtc.state->active) |
| return; |
| |
| rcar_du_crtc_get(rcrtc); |
| rcar_du_crtc_start(rcrtc); |
| |
| /* Commit the planes state. */ |
| if (rcar_du_has(rcrtc->group->dev, RCAR_DU_FEATURE_VSP1_SOURCE)) { |
| rcar_du_vsp_enable(rcrtc); |
| } else { |
| for (i = 0; i < rcrtc->group->num_planes; ++i) { |
| struct rcar_du_plane *plane = &rcrtc->group->planes[i]; |
| |
| if (plane->plane.state->crtc != &rcrtc->crtc) |
| continue; |
| |
| rcar_du_plane_setup(plane); |
| } |
| } |
| |
| rcar_du_crtc_update_planes(rcrtc); |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * CRTC Functions |
| */ |
| |
| static void rcar_du_crtc_enable(struct drm_crtc *crtc) |
| { |
| struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc); |
| |
| rcar_du_crtc_get(rcrtc); |
| rcar_du_crtc_start(rcrtc); |
| } |
| |
| static void rcar_du_crtc_disable(struct drm_crtc *crtc) |
| { |
| struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc); |
| |
| rcar_du_crtc_stop(rcrtc); |
| rcar_du_crtc_put(rcrtc); |
| |
| rcrtc->outputs = 0; |
| } |
| |
| static void rcar_du_crtc_atomic_begin(struct drm_crtc *crtc, |
| struct drm_crtc_state *old_crtc_state) |
| { |
| struct drm_pending_vblank_event *event = crtc->state->event; |
| struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc); |
| struct drm_device *dev = rcrtc->crtc.dev; |
| unsigned long flags; |
| |
| if (event) { |
| WARN_ON(drm_crtc_vblank_get(crtc) != 0); |
| |
| spin_lock_irqsave(&dev->event_lock, flags); |
| rcrtc->event = event; |
| spin_unlock_irqrestore(&dev->event_lock, flags); |
| } |
| |
| if (rcar_du_has(rcrtc->group->dev, RCAR_DU_FEATURE_VSP1_SOURCE)) |
| rcar_du_vsp_atomic_begin(rcrtc); |
| } |
| |
| static void rcar_du_crtc_atomic_flush(struct drm_crtc *crtc, |
| struct drm_crtc_state *old_crtc_state) |
| { |
| struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc); |
| |
| rcar_du_crtc_update_planes(rcrtc); |
| |
| if (rcar_du_has(rcrtc->group->dev, RCAR_DU_FEATURE_VSP1_SOURCE)) |
| rcar_du_vsp_atomic_flush(rcrtc); |
| } |
| |
| static const struct drm_crtc_helper_funcs crtc_helper_funcs = { |
| .disable = rcar_du_crtc_disable, |
| .enable = rcar_du_crtc_enable, |
| .atomic_begin = rcar_du_crtc_atomic_begin, |
| .atomic_flush = rcar_du_crtc_atomic_flush, |
| }; |
| |
| static const struct drm_crtc_funcs crtc_funcs = { |
| .reset = drm_atomic_helper_crtc_reset, |
| .destroy = drm_crtc_cleanup, |
| .set_config = drm_atomic_helper_set_config, |
| .page_flip = drm_atomic_helper_page_flip, |
| .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, |
| }; |
| |
| /* ----------------------------------------------------------------------------- |
| * Interrupt Handling |
| */ |
| |
| static irqreturn_t rcar_du_crtc_irq(int irq, void *arg) |
| { |
| struct rcar_du_crtc *rcrtc = arg; |
| irqreturn_t ret = IRQ_NONE; |
| u32 status; |
| |
| status = rcar_du_crtc_read(rcrtc, DSSR); |
| rcar_du_crtc_write(rcrtc, DSRCR, status & DSRCR_MASK); |
| |
| if (status & DSSR_FRM) { |
| drm_crtc_handle_vblank(&rcrtc->crtc); |
| rcar_du_crtc_finish_page_flip(rcrtc); |
| ret = IRQ_HANDLED; |
| } |
| |
| return ret; |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Initialization |
| */ |
| |
| int rcar_du_crtc_create(struct rcar_du_group *rgrp, unsigned int index) |
| { |
| static const unsigned int mmio_offsets[] = { |
| DU0_REG_OFFSET, DU1_REG_OFFSET, DU2_REG_OFFSET, DU3_REG_OFFSET |
| }; |
| |
| struct rcar_du_device *rcdu = rgrp->dev; |
| struct platform_device *pdev = to_platform_device(rcdu->dev); |
| struct rcar_du_crtc *rcrtc = &rcdu->crtcs[index]; |
| struct drm_crtc *crtc = &rcrtc->crtc; |
| struct drm_plane *primary; |
| unsigned int irqflags; |
| struct clk *clk; |
| char clk_name[9]; |
| char *name; |
| int irq; |
| int ret; |
| |
| /* Get the CRTC clock and the optional external clock. */ |
| if (rcar_du_has(rcdu, RCAR_DU_FEATURE_CRTC_IRQ_CLOCK)) { |
| sprintf(clk_name, "du.%u", index); |
| name = clk_name; |
| } else { |
| name = NULL; |
| } |
| |
| rcrtc->clock = devm_clk_get(rcdu->dev, name); |
| if (IS_ERR(rcrtc->clock)) { |
| dev_err(rcdu->dev, "no clock for CRTC %u\n", index); |
| return PTR_ERR(rcrtc->clock); |
| } |
| |
| sprintf(clk_name, "dclkin.%u", index); |
| clk = devm_clk_get(rcdu->dev, clk_name); |
| if (!IS_ERR(clk)) { |
| rcrtc->extclock = clk; |
| } else if (PTR_ERR(rcrtc->clock) == -EPROBE_DEFER) { |
| dev_info(rcdu->dev, "can't get external clock %u\n", index); |
| return -EPROBE_DEFER; |
| } |
| |
| init_waitqueue_head(&rcrtc->flip_wait); |
| |
| rcrtc->group = rgrp; |
| rcrtc->mmio_offset = mmio_offsets[index]; |
| rcrtc->index = index; |
| |
| if (rcar_du_has(rcdu, RCAR_DU_FEATURE_VSP1_SOURCE)) |
| primary = &rcrtc->vsp->planes[0].plane; |
| else |
| primary = &rgrp->planes[index % 2].plane; |
| |
| ret = drm_crtc_init_with_planes(rcdu->ddev, crtc, primary, |
| NULL, &crtc_funcs, NULL); |
| if (ret < 0) |
| return ret; |
| |
| drm_crtc_helper_add(crtc, &crtc_helper_funcs); |
| |
| /* Start with vertical blanking interrupt reporting disabled. */ |
| drm_crtc_vblank_off(crtc); |
| |
| /* Register the interrupt handler. */ |
| if (rcar_du_has(rcdu, RCAR_DU_FEATURE_CRTC_IRQ_CLOCK)) { |
| irq = platform_get_irq(pdev, index); |
| irqflags = 0; |
| } else { |
| irq = platform_get_irq(pdev, 0); |
| irqflags = IRQF_SHARED; |
| } |
| |
| if (irq < 0) { |
| dev_err(rcdu->dev, "no IRQ for CRTC %u\n", index); |
| return irq; |
| } |
| |
| ret = devm_request_irq(rcdu->dev, irq, rcar_du_crtc_irq, irqflags, |
| dev_name(rcdu->dev), rcrtc); |
| if (ret < 0) { |
| dev_err(rcdu->dev, |
| "failed to register IRQ for CRTC %u\n", index); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| void rcar_du_crtc_enable_vblank(struct rcar_du_crtc *rcrtc, bool enable) |
| { |
| if (enable) { |
| rcar_du_crtc_write(rcrtc, DSRCR, DSRCR_VBCL); |
| rcar_du_crtc_set(rcrtc, DIER, DIER_VBE); |
| } else { |
| rcar_du_crtc_clr(rcrtc, DIER, DIER_VBE); |
| } |
| } |