| /* |
| * rcar_du_kms.c -- R-Car Display Unit Mode Setting |
| * |
| * Copyright (C) 2013-2015 Renesas Electronics Corporation |
| * |
| * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <drm/drmP.h> |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <drm/drm_fb_cma_helper.h> |
| #include <drm/drm_gem_cma_helper.h> |
| |
| #include <linux/of_graph.h> |
| #include <linux/wait.h> |
| |
| #include "rcar_du_crtc.h" |
| #include "rcar_du_drv.h" |
| #include "rcar_du_encoder.h" |
| #include "rcar_du_kms.h" |
| #include "rcar_du_lvdsenc.h" |
| #include "rcar_du_regs.h" |
| #include "rcar_du_vsp.h" |
| |
| /* ----------------------------------------------------------------------------- |
| * Format helpers |
| */ |
| |
| static const struct rcar_du_format_info rcar_du_format_infos[] = { |
| { |
| .fourcc = DRM_FORMAT_RGB565, |
| .bpp = 16, |
| .planes = 1, |
| .pnmr = PnMR_SPIM_TP | PnMR_DDDF_16BPP, |
| .edf = PnDDCR4_EDF_NONE, |
| }, { |
| .fourcc = DRM_FORMAT_ARGB1555, |
| .bpp = 16, |
| .planes = 1, |
| .pnmr = PnMR_SPIM_ALP | PnMR_DDDF_ARGB, |
| .edf = PnDDCR4_EDF_NONE, |
| }, { |
| .fourcc = DRM_FORMAT_XRGB1555, |
| .bpp = 16, |
| .planes = 1, |
| .pnmr = PnMR_SPIM_ALP | PnMR_DDDF_ARGB, |
| .edf = PnDDCR4_EDF_NONE, |
| }, { |
| .fourcc = DRM_FORMAT_XRGB8888, |
| .bpp = 32, |
| .planes = 1, |
| .pnmr = PnMR_SPIM_TP | PnMR_DDDF_16BPP, |
| .edf = PnDDCR4_EDF_RGB888, |
| }, { |
| .fourcc = DRM_FORMAT_ARGB8888, |
| .bpp = 32, |
| .planes = 1, |
| .pnmr = PnMR_SPIM_ALP | PnMR_DDDF_16BPP, |
| .edf = PnDDCR4_EDF_ARGB8888, |
| }, { |
| .fourcc = DRM_FORMAT_UYVY, |
| .bpp = 16, |
| .planes = 1, |
| .pnmr = PnMR_SPIM_TP_OFF | PnMR_DDDF_YC, |
| .edf = PnDDCR4_EDF_NONE, |
| }, { |
| .fourcc = DRM_FORMAT_YUYV, |
| .bpp = 16, |
| .planes = 1, |
| .pnmr = PnMR_SPIM_TP_OFF | PnMR_DDDF_YC, |
| .edf = PnDDCR4_EDF_NONE, |
| }, { |
| .fourcc = DRM_FORMAT_NV12, |
| .bpp = 12, |
| .planes = 2, |
| .pnmr = PnMR_SPIM_TP_OFF | PnMR_DDDF_YC, |
| .edf = PnDDCR4_EDF_NONE, |
| }, { |
| .fourcc = DRM_FORMAT_NV21, |
| .bpp = 12, |
| .planes = 2, |
| .pnmr = PnMR_SPIM_TP_OFF | PnMR_DDDF_YC, |
| .edf = PnDDCR4_EDF_NONE, |
| }, { |
| .fourcc = DRM_FORMAT_NV16, |
| .bpp = 16, |
| .planes = 2, |
| .pnmr = PnMR_SPIM_TP_OFF | PnMR_DDDF_YC, |
| .edf = PnDDCR4_EDF_NONE, |
| }, |
| /* The following formats are not supported on Gen2 and thus have no |
| * associated .pnmr or .edf settings. |
| */ |
| { |
| .fourcc = DRM_FORMAT_NV61, |
| .bpp = 16, |
| .planes = 2, |
| }, { |
| .fourcc = DRM_FORMAT_YUV420, |
| .bpp = 12, |
| .planes = 3, |
| }, { |
| .fourcc = DRM_FORMAT_YVU420, |
| .bpp = 12, |
| .planes = 3, |
| }, { |
| .fourcc = DRM_FORMAT_YUV422, |
| .bpp = 16, |
| .planes = 3, |
| }, { |
| .fourcc = DRM_FORMAT_YVU422, |
| .bpp = 16, |
| .planes = 3, |
| }, { |
| .fourcc = DRM_FORMAT_YUV444, |
| .bpp = 24, |
| .planes = 3, |
| }, { |
| .fourcc = DRM_FORMAT_YVU444, |
| .bpp = 24, |
| .planes = 3, |
| }, |
| }; |
| |
| const struct rcar_du_format_info *rcar_du_format_info(u32 fourcc) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(rcar_du_format_infos); ++i) { |
| if (rcar_du_format_infos[i].fourcc == fourcc) |
| return &rcar_du_format_infos[i]; |
| } |
| |
| return NULL; |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Frame buffer |
| */ |
| |
| int rcar_du_dumb_create(struct drm_file *file, struct drm_device *dev, |
| struct drm_mode_create_dumb *args) |
| { |
| struct rcar_du_device *rcdu = dev->dev_private; |
| unsigned int min_pitch = DIV_ROUND_UP(args->width * args->bpp, 8); |
| unsigned int align; |
| |
| /* The R8A7779 DU requires a 16 pixels pitch alignment as documented, |
| * but the R8A7790 DU seems to require a 128 bytes pitch alignment. |
| */ |
| if (rcar_du_needs(rcdu, RCAR_DU_QUIRK_ALIGN_128B)) |
| align = 128; |
| else |
| align = 16 * args->bpp / 8; |
| |
| args->pitch = roundup(min_pitch, align); |
| |
| return drm_gem_cma_dumb_create_internal(file, dev, args); |
| } |
| |
| static struct drm_framebuffer * |
| rcar_du_fb_create(struct drm_device *dev, struct drm_file *file_priv, |
| const struct drm_mode_fb_cmd2 *mode_cmd) |
| { |
| struct rcar_du_device *rcdu = dev->dev_private; |
| const struct rcar_du_format_info *format; |
| unsigned int max_pitch; |
| unsigned int align; |
| unsigned int bpp; |
| unsigned int i; |
| |
| format = rcar_du_format_info(mode_cmd->pixel_format); |
| if (format == NULL) { |
| dev_dbg(dev->dev, "unsupported pixel format %08x\n", |
| mode_cmd->pixel_format); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| /* |
| * The pitch and alignment constraints are expressed in pixels on the |
| * hardware side and in bytes in the DRM API. |
| */ |
| bpp = format->planes == 1 ? format->bpp / 8 : 1; |
| max_pitch = 4096 * bpp; |
| |
| if (rcar_du_needs(rcdu, RCAR_DU_QUIRK_ALIGN_128B)) |
| align = 128; |
| else |
| align = 16 * bpp; |
| |
| if (mode_cmd->pitches[0] & (align - 1) || |
| mode_cmd->pitches[0] >= max_pitch) { |
| dev_dbg(dev->dev, "invalid pitch value %u\n", |
| mode_cmd->pitches[0]); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| for (i = 1; i < format->planes; ++i) { |
| if (mode_cmd->pitches[i] != mode_cmd->pitches[0]) { |
| dev_dbg(dev->dev, |
| "luma and chroma pitches do not match\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| } |
| |
| return drm_fb_cma_create(dev, file_priv, mode_cmd); |
| } |
| |
| static void rcar_du_output_poll_changed(struct drm_device *dev) |
| { |
| struct rcar_du_device *rcdu = dev->dev_private; |
| |
| drm_fbdev_cma_hotplug_event(rcdu->fbdev); |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Atomic Check and Update |
| */ |
| |
| static int rcar_du_atomic_check(struct drm_device *dev, |
| struct drm_atomic_state *state) |
| { |
| struct rcar_du_device *rcdu = dev->dev_private; |
| int ret; |
| |
| ret = drm_atomic_helper_check_modeset(dev, state); |
| if (ret) |
| return ret; |
| |
| ret = drm_atomic_normalize_zpos(dev, state); |
| if (ret) |
| return ret; |
| |
| ret = drm_atomic_helper_check_planes(dev, state); |
| if (ret) |
| return ret; |
| |
| if (rcar_du_has(rcdu, RCAR_DU_FEATURE_VSP1_SOURCE)) |
| return 0; |
| |
| return rcar_du_atomic_check_planes(dev, state); |
| } |
| |
| struct rcar_du_commit { |
| struct work_struct work; |
| struct drm_device *dev; |
| struct drm_atomic_state *state; |
| u32 crtcs; |
| }; |
| |
| static void rcar_du_atomic_complete(struct rcar_du_commit *commit) |
| { |
| struct drm_device *dev = commit->dev; |
| struct rcar_du_device *rcdu = dev->dev_private; |
| struct drm_atomic_state *old_state = commit->state; |
| |
| /* Apply the atomic update. */ |
| drm_atomic_helper_commit_modeset_disables(dev, old_state); |
| drm_atomic_helper_commit_modeset_enables(dev, old_state); |
| drm_atomic_helper_commit_planes(dev, old_state, |
| DRM_PLANE_COMMIT_ACTIVE_ONLY); |
| |
| drm_atomic_helper_wait_for_vblanks(dev, old_state); |
| |
| drm_atomic_helper_cleanup_planes(dev, old_state); |
| |
| drm_atomic_state_free(old_state); |
| |
| /* Complete the commit, wake up any waiter. */ |
| spin_lock(&rcdu->commit.wait.lock); |
| rcdu->commit.pending &= ~commit->crtcs; |
| wake_up_all_locked(&rcdu->commit.wait); |
| spin_unlock(&rcdu->commit.wait.lock); |
| |
| kfree(commit); |
| } |
| |
| static void rcar_du_atomic_work(struct work_struct *work) |
| { |
| struct rcar_du_commit *commit = |
| container_of(work, struct rcar_du_commit, work); |
| |
| rcar_du_atomic_complete(commit); |
| } |
| |
| static int rcar_du_atomic_commit(struct drm_device *dev, |
| struct drm_atomic_state *state, |
| bool nonblock) |
| { |
| struct rcar_du_device *rcdu = dev->dev_private; |
| struct rcar_du_commit *commit; |
| struct drm_crtc *crtc; |
| struct drm_crtc_state *crtc_state; |
| unsigned int i; |
| int ret; |
| |
| ret = drm_atomic_helper_prepare_planes(dev, state); |
| if (ret) |
| return ret; |
| |
| /* Allocate the commit object. */ |
| commit = kzalloc(sizeof(*commit), GFP_KERNEL); |
| if (commit == NULL) { |
| ret = -ENOMEM; |
| goto error; |
| } |
| |
| INIT_WORK(&commit->work, rcar_du_atomic_work); |
| commit->dev = dev; |
| commit->state = state; |
| |
| /* Wait until all affected CRTCs have completed previous commits and |
| * mark them as pending. |
| */ |
| for_each_crtc_in_state(state, crtc, crtc_state, i) |
| commit->crtcs |= drm_crtc_mask(crtc); |
| |
| spin_lock(&rcdu->commit.wait.lock); |
| ret = wait_event_interruptible_locked(rcdu->commit.wait, |
| !(rcdu->commit.pending & commit->crtcs)); |
| if (ret == 0) |
| rcdu->commit.pending |= commit->crtcs; |
| spin_unlock(&rcdu->commit.wait.lock); |
| |
| if (ret) { |
| kfree(commit); |
| goto error; |
| } |
| |
| /* Swap the state, this is the point of no return. */ |
| drm_atomic_helper_swap_state(state, true); |
| |
| if (nonblock) |
| schedule_work(&commit->work); |
| else |
| rcar_du_atomic_complete(commit); |
| |
| return 0; |
| |
| error: |
| drm_atomic_helper_cleanup_planes(dev, state); |
| return ret; |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Initialization |
| */ |
| |
| static const struct drm_mode_config_funcs rcar_du_mode_config_funcs = { |
| .fb_create = rcar_du_fb_create, |
| .output_poll_changed = rcar_du_output_poll_changed, |
| .atomic_check = rcar_du_atomic_check, |
| .atomic_commit = rcar_du_atomic_commit, |
| }; |
| |
| static int rcar_du_encoders_init_one(struct rcar_du_device *rcdu, |
| enum rcar_du_output output, |
| struct of_endpoint *ep) |
| { |
| static const struct { |
| const char *compatible; |
| enum rcar_du_encoder_type type; |
| } encoders[] = { |
| { "adi,adv7123", RCAR_DU_ENCODER_VGA }, |
| { "adi,adv7511w", RCAR_DU_ENCODER_HDMI }, |
| { "thine,thc63lvdm83d", RCAR_DU_ENCODER_LVDS }, |
| }; |
| |
| enum rcar_du_encoder_type enc_type = RCAR_DU_ENCODER_NONE; |
| struct device_node *connector = NULL; |
| struct device_node *encoder = NULL; |
| struct device_node *ep_node = NULL; |
| struct device_node *entity_ep_node; |
| struct device_node *entity; |
| int ret; |
| |
| /* |
| * Locate the connected entity and infer its type from the number of |
| * endpoints. |
| */ |
| entity = of_graph_get_remote_port_parent(ep->local_node); |
| if (!entity) { |
| dev_dbg(rcdu->dev, "unconnected endpoint %s, skipping\n", |
| ep->local_node->full_name); |
| return -ENODEV; |
| } |
| |
| entity_ep_node = of_parse_phandle(ep->local_node, "remote-endpoint", 0); |
| |
| for_each_endpoint_of_node(entity, ep_node) { |
| if (ep_node == entity_ep_node) |
| continue; |
| |
| /* |
| * We've found one endpoint other than the input, this must |
| * be an encoder. Locate the connector. |
| */ |
| encoder = entity; |
| connector = of_graph_get_remote_port_parent(ep_node); |
| of_node_put(ep_node); |
| |
| if (!connector) { |
| dev_warn(rcdu->dev, |
| "no connector for encoder %s, skipping\n", |
| encoder->full_name); |
| of_node_put(entity_ep_node); |
| of_node_put(encoder); |
| return -ENODEV; |
| } |
| |
| break; |
| } |
| |
| of_node_put(entity_ep_node); |
| |
| if (encoder) { |
| /* |
| * If an encoder has been found, get its type based on its |
| * compatible string. |
| */ |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(encoders); ++i) { |
| if (of_device_is_compatible(encoder, |
| encoders[i].compatible)) { |
| enc_type = encoders[i].type; |
| break; |
| } |
| } |
| |
| if (i == ARRAY_SIZE(encoders)) { |
| dev_warn(rcdu->dev, |
| "unknown encoder type for %s, skipping\n", |
| encoder->full_name); |
| of_node_put(encoder); |
| of_node_put(connector); |
| return -EINVAL; |
| } |
| } else { |
| /* |
| * If no encoder has been found the entity must be the |
| * connector. |
| */ |
| connector = entity; |
| } |
| |
| ret = rcar_du_encoder_init(rcdu, enc_type, output, encoder, connector); |
| of_node_put(encoder); |
| of_node_put(connector); |
| |
| if (ret && ret != -EPROBE_DEFER) |
| dev_warn(rcdu->dev, |
| "failed to initialize encoder %s (%d), skipping\n", |
| encoder->full_name, ret); |
| |
| return ret; |
| } |
| |
| static int rcar_du_encoders_init(struct rcar_du_device *rcdu) |
| { |
| struct device_node *np = rcdu->dev->of_node; |
| struct device_node *ep_node; |
| unsigned int num_encoders = 0; |
| |
| /* |
| * Iterate over the endpoints and create one encoder for each output |
| * pipeline. |
| */ |
| for_each_endpoint_of_node(np, ep_node) { |
| enum rcar_du_output output; |
| struct of_endpoint ep; |
| unsigned int i; |
| int ret; |
| |
| ret = of_graph_parse_endpoint(ep_node, &ep); |
| if (ret < 0) { |
| of_node_put(ep_node); |
| return ret; |
| } |
| |
| /* Find the output route corresponding to the port number. */ |
| for (i = 0; i < RCAR_DU_OUTPUT_MAX; ++i) { |
| if (rcdu->info->routes[i].possible_crtcs && |
| rcdu->info->routes[i].port == ep.port) { |
| output = i; |
| break; |
| } |
| } |
| |
| if (i == RCAR_DU_OUTPUT_MAX) { |
| dev_warn(rcdu->dev, |
| "port %u references unexisting output, skipping\n", |
| ep.port); |
| continue; |
| } |
| |
| /* Process the output pipeline. */ |
| ret = rcar_du_encoders_init_one(rcdu, output, &ep); |
| if (ret < 0) { |
| if (ret == -EPROBE_DEFER) { |
| of_node_put(ep_node); |
| return ret; |
| } |
| |
| continue; |
| } |
| |
| num_encoders++; |
| } |
| |
| return num_encoders; |
| } |
| |
| static int rcar_du_properties_init(struct rcar_du_device *rcdu) |
| { |
| rcdu->props.alpha = |
| drm_property_create_range(rcdu->ddev, 0, "alpha", 0, 255); |
| if (rcdu->props.alpha == NULL) |
| return -ENOMEM; |
| |
| /* The color key is expressed as an RGB888 triplet stored in a 32-bit |
| * integer in XRGB8888 format. Bit 24 is used as a flag to disable (0) |
| * or enable source color keying (1). |
| */ |
| rcdu->props.colorkey = |
| drm_property_create_range(rcdu->ddev, 0, "colorkey", |
| 0, 0x01ffffff); |
| if (rcdu->props.colorkey == NULL) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| int rcar_du_modeset_init(struct rcar_du_device *rcdu) |
| { |
| static const unsigned int mmio_offsets[] = { |
| DU0_REG_OFFSET, DU2_REG_OFFSET |
| }; |
| |
| struct drm_device *dev = rcdu->ddev; |
| struct drm_encoder *encoder; |
| struct drm_fbdev_cma *fbdev; |
| unsigned int num_encoders; |
| unsigned int num_groups; |
| unsigned int i; |
| int ret; |
| |
| drm_mode_config_init(dev); |
| |
| dev->mode_config.min_width = 0; |
| dev->mode_config.min_height = 0; |
| dev->mode_config.max_width = 4095; |
| dev->mode_config.max_height = 2047; |
| dev->mode_config.funcs = &rcar_du_mode_config_funcs; |
| |
| rcdu->num_crtcs = rcdu->info->num_crtcs; |
| |
| ret = rcar_du_properties_init(rcdu); |
| if (ret < 0) |
| return ret; |
| |
| /* Initialize the groups. */ |
| num_groups = DIV_ROUND_UP(rcdu->num_crtcs, 2); |
| |
| for (i = 0; i < num_groups; ++i) { |
| struct rcar_du_group *rgrp = &rcdu->groups[i]; |
| |
| mutex_init(&rgrp->lock); |
| |
| rgrp->dev = rcdu; |
| rgrp->mmio_offset = mmio_offsets[i]; |
| rgrp->index = i; |
| rgrp->num_crtcs = min(rcdu->num_crtcs - 2 * i, 2U); |
| |
| /* If we have more than one CRTCs in this group pre-associate |
| * the low-order planes with CRTC 0 and the high-order planes |
| * with CRTC 1 to minimize flicker occurring when the |
| * association is changed. |
| */ |
| rgrp->dptsr_planes = rgrp->num_crtcs > 1 |
| ? (rcdu->info->gen >= 3 ? 0x04 : 0xf0) |
| : 0; |
| |
| if (!rcar_du_has(rcdu, RCAR_DU_FEATURE_VSP1_SOURCE)) { |
| ret = rcar_du_planes_init(rgrp); |
| if (ret < 0) |
| return ret; |
| } |
| } |
| |
| /* Initialize the compositors. */ |
| if (rcar_du_has(rcdu, RCAR_DU_FEATURE_VSP1_SOURCE)) { |
| for (i = 0; i < rcdu->num_crtcs; ++i) { |
| struct rcar_du_vsp *vsp = &rcdu->vsps[i]; |
| |
| vsp->index = i; |
| vsp->dev = rcdu; |
| rcdu->crtcs[i].vsp = vsp; |
| |
| ret = rcar_du_vsp_init(vsp); |
| if (ret < 0) |
| return ret; |
| } |
| } |
| |
| /* Create the CRTCs. */ |
| for (i = 0; i < rcdu->num_crtcs; ++i) { |
| struct rcar_du_group *rgrp = &rcdu->groups[i / 2]; |
| |
| ret = rcar_du_crtc_create(rgrp, i); |
| if (ret < 0) |
| return ret; |
| } |
| |
| /* Initialize the encoders. */ |
| ret = rcar_du_lvdsenc_init(rcdu); |
| if (ret < 0) |
| return ret; |
| |
| ret = rcar_du_encoders_init(rcdu); |
| if (ret < 0) |
| return ret; |
| |
| if (ret == 0) { |
| dev_err(rcdu->dev, "error: no encoder could be initialized\n"); |
| return -EINVAL; |
| } |
| |
| num_encoders = ret; |
| |
| /* Set the possible CRTCs and possible clones. There's always at least |
| * one way for all encoders to clone each other, set all bits in the |
| * possible clones field. |
| */ |
| list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { |
| struct rcar_du_encoder *renc = to_rcar_encoder(encoder); |
| const struct rcar_du_output_routing *route = |
| &rcdu->info->routes[renc->output]; |
| |
| encoder->possible_crtcs = route->possible_crtcs; |
| encoder->possible_clones = (1 << num_encoders) - 1; |
| } |
| |
| drm_mode_config_reset(dev); |
| |
| drm_kms_helper_poll_init(dev); |
| |
| if (dev->mode_config.num_connector) { |
| fbdev = drm_fbdev_cma_init(dev, 32, dev->mode_config.num_crtc, |
| dev->mode_config.num_connector); |
| if (IS_ERR(fbdev)) |
| return PTR_ERR(fbdev); |
| |
| rcdu->fbdev = fbdev; |
| } else { |
| dev_info(rcdu->dev, |
| "no connector found, disabling fbdev emulation\n"); |
| } |
| |
| return 0; |
| } |