| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * PowerNV SCOM bus debugfs interface |
| * |
| * Copyright 2010 Benjamin Herrenschmidt, IBM Corp |
| * <benh@kernel.crashing.org> |
| * and David Gibson, IBM Corporation. |
| * Copyright 2013 IBM Corp. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/of.h> |
| #include <linux/bug.h> |
| #include <linux/gfp.h> |
| #include <linux/slab.h> |
| #include <linux/uaccess.h> |
| #include <linux/debugfs.h> |
| |
| #include <asm/machdep.h> |
| #include <asm/firmware.h> |
| #include <asm/opal.h> |
| #include <asm/prom.h> |
| |
| static u64 opal_scom_unmangle(u64 addr) |
| { |
| u64 tmp; |
| |
| /* |
| * XSCOM addresses use the top nibble to set indirect mode and |
| * its form. Bits 4-11 are always 0. |
| * |
| * Because the debugfs interface uses signed offsets and shifts |
| * the address left by 3, we basically cannot use the top 4 bits |
| * of the 64-bit address, and thus cannot use the indirect bit. |
| * |
| * To deal with that, we support the indirect bits being in |
| * bits 4-7 (IBM notation) instead of bit 0-3 in this API, we |
| * do the conversion here. |
| * |
| * For in-kernel use, we don't need to do this mangling. In |
| * kernel won't have bits 4-7 set. |
| * |
| * So: |
| * debugfs will always set 0-3 = 0 and clear 4-7 |
| * kernel will always clear 0-3 = 0 and set 4-7 |
| */ |
| tmp = addr; |
| tmp &= 0x0f00000000000000; |
| addr &= 0xf0ffffffffffffff; |
| addr |= tmp << 4; |
| |
| return addr; |
| } |
| |
| static int opal_scom_read(uint32_t chip, uint64_t addr, u64 reg, u64 *value) |
| { |
| int64_t rc; |
| __be64 v; |
| |
| reg = opal_scom_unmangle(addr + reg); |
| rc = opal_xscom_read(chip, reg, (__be64 *)__pa(&v)); |
| if (rc) { |
| *value = 0xfffffffffffffffful; |
| return -EIO; |
| } |
| *value = be64_to_cpu(v); |
| return 0; |
| } |
| |
| static int opal_scom_write(uint32_t chip, uint64_t addr, u64 reg, u64 value) |
| { |
| int64_t rc; |
| |
| reg = opal_scom_unmangle(addr + reg); |
| rc = opal_xscom_write(chip, reg, value); |
| if (rc) |
| return -EIO; |
| return 0; |
| } |
| |
| struct scom_debug_entry { |
| u32 chip; |
| struct debugfs_blob_wrapper path; |
| char name[16]; |
| }; |
| |
| static ssize_t scom_debug_read(struct file *filp, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| struct scom_debug_entry *ent = filp->private_data; |
| u64 __user *ubuf64 = (u64 __user *)ubuf; |
| loff_t off = *ppos; |
| ssize_t done = 0; |
| u64 reg, reg_base, reg_cnt, val; |
| int rc; |
| |
| if (off < 0 || (off & 7) || (count & 7)) |
| return -EINVAL; |
| reg_base = off >> 3; |
| reg_cnt = count >> 3; |
| |
| for (reg = 0; reg < reg_cnt; reg++) { |
| rc = opal_scom_read(ent->chip, reg_base, reg, &val); |
| if (!rc) |
| rc = put_user(val, ubuf64); |
| if (rc) { |
| if (!done) |
| done = rc; |
| break; |
| } |
| ubuf64++; |
| *ppos += 8; |
| done += 8; |
| } |
| return done; |
| } |
| |
| static ssize_t scom_debug_write(struct file *filp, const char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| struct scom_debug_entry *ent = filp->private_data; |
| u64 __user *ubuf64 = (u64 __user *)ubuf; |
| loff_t off = *ppos; |
| ssize_t done = 0; |
| u64 reg, reg_base, reg_cnt, val; |
| int rc; |
| |
| if (off < 0 || (off & 7) || (count & 7)) |
| return -EINVAL; |
| reg_base = off >> 3; |
| reg_cnt = count >> 3; |
| |
| for (reg = 0; reg < reg_cnt; reg++) { |
| rc = get_user(val, ubuf64); |
| if (!rc) |
| rc = opal_scom_write(ent->chip, reg_base, reg, val); |
| if (rc) { |
| if (!done) |
| done = rc; |
| break; |
| } |
| ubuf64++; |
| done += 8; |
| } |
| return done; |
| } |
| |
| static const struct file_operations scom_debug_fops = { |
| .read = scom_debug_read, |
| .write = scom_debug_write, |
| .open = simple_open, |
| .llseek = default_llseek, |
| }; |
| |
| static int scom_debug_init_one(struct dentry *root, struct device_node *dn, |
| int chip) |
| { |
| struct scom_debug_entry *ent; |
| struct dentry *dir; |
| |
| ent = kzalloc(sizeof(*ent), GFP_KERNEL); |
| if (!ent) |
| return -ENOMEM; |
| |
| ent->chip = chip; |
| snprintf(ent->name, 16, "%08x", chip); |
| ent->path.data = (void *)kasprintf(GFP_KERNEL, "%pOF", dn); |
| if (!ent->path.data) { |
| kfree(ent); |
| return -ENOMEM; |
| } |
| |
| ent->path.size = strlen((char *)ent->path.data); |
| |
| dir = debugfs_create_dir(ent->name, root); |
| if (IS_ERR(dir)) { |
| kfree(ent->path.data); |
| kfree(ent); |
| return -1; |
| } |
| |
| debugfs_create_blob("devspec", 0400, dir, &ent->path); |
| debugfs_create_file("access", 0600, dir, ent, &scom_debug_fops); |
| |
| return 0; |
| } |
| |
| static int scom_debug_init(void) |
| { |
| struct device_node *dn; |
| struct dentry *root; |
| int chip, rc; |
| |
| if (!firmware_has_feature(FW_FEATURE_OPAL)) |
| return 0; |
| |
| root = debugfs_create_dir("scom", arch_debugfs_dir); |
| if (IS_ERR(root)) |
| return -1; |
| |
| rc = 0; |
| for_each_node_with_property(dn, "scom-controller") { |
| chip = of_get_ibm_chip_id(dn); |
| WARN_ON(chip == -1); |
| rc |= scom_debug_init_one(root, dn, chip); |
| } |
| |
| return rc; |
| } |
| device_initcall(scom_debug_init); |