| // SPDX-License-Identifier: GPL-2.0 |
| |
| #include <linux/sched.h> |
| #include <linux/sched/clock.h> |
| |
| #include <asm/cpu.h> |
| #include <asm/cpufeature.h> |
| #include <asm/e820/api.h> |
| #include <asm/mtrr.h> |
| #include <asm/msr.h> |
| |
| #include "cpu.h" |
| |
| #define ACE_PRESENT (1 << 6) |
| #define ACE_ENABLED (1 << 7) |
| #define ACE_FCR (1 << 28) /* MSR_VIA_FCR */ |
| |
| #define RNG_PRESENT (1 << 2) |
| #define RNG_ENABLED (1 << 3) |
| #define RNG_ENABLE (1 << 6) /* MSR_VIA_RNG */ |
| |
| static void init_c3(struct cpuinfo_x86 *c) |
| { |
| u32 lo, hi; |
| |
| /* Test for Centaur Extended Feature Flags presence */ |
| if (cpuid_eax(0xC0000000) >= 0xC0000001) { |
| u32 tmp = cpuid_edx(0xC0000001); |
| |
| /* enable ACE unit, if present and disabled */ |
| if ((tmp & (ACE_PRESENT | ACE_ENABLED)) == ACE_PRESENT) { |
| rdmsr(MSR_VIA_FCR, lo, hi); |
| lo |= ACE_FCR; /* enable ACE unit */ |
| wrmsr(MSR_VIA_FCR, lo, hi); |
| pr_info("CPU: Enabled ACE h/w crypto\n"); |
| } |
| |
| /* enable RNG unit, if present and disabled */ |
| if ((tmp & (RNG_PRESENT | RNG_ENABLED)) == RNG_PRESENT) { |
| rdmsr(MSR_VIA_RNG, lo, hi); |
| lo |= RNG_ENABLE; /* enable RNG unit */ |
| wrmsr(MSR_VIA_RNG, lo, hi); |
| pr_info("CPU: Enabled h/w RNG\n"); |
| } |
| |
| /* store Centaur Extended Feature Flags as |
| * word 5 of the CPU capability bit array |
| */ |
| c->x86_capability[CPUID_C000_0001_EDX] = cpuid_edx(0xC0000001); |
| } |
| #ifdef CONFIG_X86_32 |
| /* Cyrix III family needs CX8 & PGE explicitly enabled. */ |
| if (c->x86_model >= 6 && c->x86_model <= 13) { |
| rdmsr(MSR_VIA_FCR, lo, hi); |
| lo |= (1<<1 | 1<<7); |
| wrmsr(MSR_VIA_FCR, lo, hi); |
| set_cpu_cap(c, X86_FEATURE_CX8); |
| } |
| |
| /* Before Nehemiah, the C3's had 3dNOW! */ |
| if (c->x86_model >= 6 && c->x86_model < 9) |
| set_cpu_cap(c, X86_FEATURE_3DNOW); |
| #endif |
| if (c->x86 == 0x6 && c->x86_model >= 0xf) { |
| c->x86_cache_alignment = c->x86_clflush_size * 2; |
| set_cpu_cap(c, X86_FEATURE_REP_GOOD); |
| } |
| |
| if (c->x86 >= 7) |
| set_cpu_cap(c, X86_FEATURE_REP_GOOD); |
| } |
| |
| enum { |
| ECX8 = 1<<1, |
| EIERRINT = 1<<2, |
| DPM = 1<<3, |
| DMCE = 1<<4, |
| DSTPCLK = 1<<5, |
| ELINEAR = 1<<6, |
| DSMC = 1<<7, |
| DTLOCK = 1<<8, |
| EDCTLB = 1<<8, |
| EMMX = 1<<9, |
| DPDC = 1<<11, |
| EBRPRED = 1<<12, |
| DIC = 1<<13, |
| DDC = 1<<14, |
| DNA = 1<<15, |
| ERETSTK = 1<<16, |
| E2MMX = 1<<19, |
| EAMD3D = 1<<20, |
| }; |
| |
| static void early_init_centaur(struct cpuinfo_x86 *c) |
| { |
| #ifdef CONFIG_X86_32 |
| /* Emulate MTRRs using Centaur's MCR. */ |
| if (c->x86 == 5) |
| set_cpu_cap(c, X86_FEATURE_CENTAUR_MCR); |
| #endif |
| if ((c->x86 == 6 && c->x86_model >= 0xf) || |
| (c->x86 >= 7)) |
| set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); |
| |
| #ifdef CONFIG_X86_64 |
| set_cpu_cap(c, X86_FEATURE_SYSENTER32); |
| #endif |
| if (c->x86_power & (1 << 8)) { |
| set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); |
| set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC); |
| } |
| } |
| |
| static void init_centaur(struct cpuinfo_x86 *c) |
| { |
| #ifdef CONFIG_X86_32 |
| char *name; |
| u32 fcr_set = 0; |
| u32 fcr_clr = 0; |
| u32 lo, hi, newlo; |
| u32 aa, bb, cc, dd; |
| |
| /* |
| * Bit 31 in normal CPUID used for nonstandard 3DNow ID; |
| * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway |
| */ |
| clear_cpu_cap(c, 0*32+31); |
| #endif |
| early_init_centaur(c); |
| init_intel_cacheinfo(c); |
| |
| if (c->cpuid_level > 9) { |
| unsigned int eax = cpuid_eax(10); |
| |
| /* |
| * Check for version and the number of counters |
| * Version(eax[7:0]) can't be 0; |
| * Counters(eax[15:8]) should be greater than 1; |
| */ |
| if ((eax & 0xff) && (((eax >> 8) & 0xff) > 1)) |
| set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON); |
| } |
| |
| #ifdef CONFIG_X86_32 |
| if (c->x86 == 5) { |
| switch (c->x86_model) { |
| case 4: |
| name = "C6"; |
| fcr_set = ECX8|DSMC|EDCTLB|EMMX|ERETSTK; |
| fcr_clr = DPDC; |
| pr_notice("Disabling bugged TSC.\n"); |
| clear_cpu_cap(c, X86_FEATURE_TSC); |
| break; |
| case 8: |
| switch (c->x86_stepping) { |
| default: |
| name = "2"; |
| break; |
| case 7 ... 9: |
| name = "2A"; |
| break; |
| case 10 ... 15: |
| name = "2B"; |
| break; |
| } |
| fcr_set = ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK| |
| E2MMX|EAMD3D; |
| fcr_clr = DPDC; |
| break; |
| case 9: |
| name = "3"; |
| fcr_set = ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK| |
| E2MMX|EAMD3D; |
| fcr_clr = DPDC; |
| break; |
| default: |
| name = "??"; |
| } |
| |
| rdmsr(MSR_IDT_FCR1, lo, hi); |
| newlo = (lo|fcr_set) & (~fcr_clr); |
| |
| if (newlo != lo) { |
| pr_info("Centaur FCR was 0x%X now 0x%X\n", |
| lo, newlo); |
| wrmsr(MSR_IDT_FCR1, newlo, hi); |
| } else { |
| pr_info("Centaur FCR is 0x%X\n", lo); |
| } |
| /* Emulate MTRRs using Centaur's MCR. */ |
| set_cpu_cap(c, X86_FEATURE_CENTAUR_MCR); |
| /* Report CX8 */ |
| set_cpu_cap(c, X86_FEATURE_CX8); |
| /* Set 3DNow! on Winchip 2 and above. */ |
| if (c->x86_model >= 8) |
| set_cpu_cap(c, X86_FEATURE_3DNOW); |
| /* See if we can find out some more. */ |
| if (cpuid_eax(0x80000000) >= 0x80000005) { |
| /* Yes, we can. */ |
| cpuid(0x80000005, &aa, &bb, &cc, &dd); |
| /* Add L1 data and code cache sizes. */ |
| c->x86_cache_size = (cc>>24)+(dd>>24); |
| } |
| sprintf(c->x86_model_id, "WinChip %s", name); |
| } |
| #endif |
| if (c->x86 == 6 || c->x86 >= 7) |
| init_c3(c); |
| #ifdef CONFIG_X86_64 |
| set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); |
| #endif |
| |
| init_ia32_feat_ctl(c); |
| } |
| |
| #ifdef CONFIG_X86_32 |
| static unsigned int |
| centaur_size_cache(struct cpuinfo_x86 *c, unsigned int size) |
| { |
| /* VIA C3 CPUs (670-68F) need further shifting. */ |
| if ((c->x86 == 6) && ((c->x86_model == 7) || (c->x86_model == 8))) |
| size >>= 8; |
| |
| /* |
| * There's also an erratum in Nehemiah stepping 1, which |
| * returns '65KB' instead of '64KB' |
| * - Note, it seems this may only be in engineering samples. |
| */ |
| if ((c->x86 == 6) && (c->x86_model == 9) && |
| (c->x86_stepping == 1) && (size == 65)) |
| size -= 1; |
| return size; |
| } |
| #endif |
| |
| static const struct cpu_dev centaur_cpu_dev = { |
| .c_vendor = "Centaur", |
| .c_ident = { "CentaurHauls" }, |
| .c_early_init = early_init_centaur, |
| .c_init = init_centaur, |
| #ifdef CONFIG_X86_32 |
| .legacy_cache_size = centaur_size_cache, |
| #endif |
| .c_x86_vendor = X86_VENDOR_CENTAUR, |
| }; |
| |
| cpu_dev_register(centaur_cpu_dev); |