| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Intel SMP support routines. |
| * |
| * (c) 1995 Alan Cox, Building #3 <alan@lxorguk.ukuu.org.uk> |
| * (c) 1998-99, 2000, 2009 Ingo Molnar <mingo@redhat.com> |
| * (c) 2002,2003 Andi Kleen, SuSE Labs. |
| * |
| * i386 and x86_64 integration by Glauber Costa <gcosta@redhat.com> |
| */ |
| |
| #include <linux/init.h> |
| |
| #include <linux/mm.h> |
| #include <linux/delay.h> |
| #include <linux/spinlock.h> |
| #include <linux/export.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/mc146818rtc.h> |
| #include <linux/cache.h> |
| #include <linux/interrupt.h> |
| #include <linux/cpu.h> |
| #include <linux/gfp.h> |
| #include <linux/kexec.h> |
| |
| #include <asm/mtrr.h> |
| #include <asm/tlbflush.h> |
| #include <asm/mmu_context.h> |
| #include <asm/proto.h> |
| #include <asm/apic.h> |
| #include <asm/cpu.h> |
| #include <asm/idtentry.h> |
| #include <asm/nmi.h> |
| #include <asm/mce.h> |
| #include <asm/trace/irq_vectors.h> |
| #include <asm/kexec.h> |
| #include <asm/reboot.h> |
| |
| /* |
| * Some notes on x86 processor bugs affecting SMP operation: |
| * |
| * Pentium, Pentium Pro, II, III (and all CPUs) have bugs. |
| * The Linux implications for SMP are handled as follows: |
| * |
| * Pentium III / [Xeon] |
| * None of the E1AP-E3AP errata are visible to the user. |
| * |
| * E1AP. see PII A1AP |
| * E2AP. see PII A2AP |
| * E3AP. see PII A3AP |
| * |
| * Pentium II / [Xeon] |
| * None of the A1AP-A3AP errata are visible to the user. |
| * |
| * A1AP. see PPro 1AP |
| * A2AP. see PPro 2AP |
| * A3AP. see PPro 7AP |
| * |
| * Pentium Pro |
| * None of 1AP-9AP errata are visible to the normal user, |
| * except occasional delivery of 'spurious interrupt' as trap #15. |
| * This is very rare and a non-problem. |
| * |
| * 1AP. Linux maps APIC as non-cacheable |
| * 2AP. worked around in hardware |
| * 3AP. fixed in C0 and above steppings microcode update. |
| * Linux does not use excessive STARTUP_IPIs. |
| * 4AP. worked around in hardware |
| * 5AP. symmetric IO mode (normal Linux operation) not affected. |
| * 'noapic' mode has vector 0xf filled out properly. |
| * 6AP. 'noapic' mode might be affected - fixed in later steppings |
| * 7AP. We do not assume writes to the LVT deasserting IRQs |
| * 8AP. We do not enable low power mode (deep sleep) during MP bootup |
| * 9AP. We do not use mixed mode |
| * |
| * Pentium |
| * There is a marginal case where REP MOVS on 100MHz SMP |
| * machines with B stepping processors can fail. XXX should provide |
| * an L1cache=Writethrough or L1cache=off option. |
| * |
| * B stepping CPUs may hang. There are hardware work arounds |
| * for this. We warn about it in case your board doesn't have the work |
| * arounds. Basically that's so I can tell anyone with a B stepping |
| * CPU and SMP problems "tough". |
| * |
| * Specific items [From Pentium Processor Specification Update] |
| * |
| * 1AP. Linux doesn't use remote read |
| * 2AP. Linux doesn't trust APIC errors |
| * 3AP. We work around this |
| * 4AP. Linux never generated 3 interrupts of the same priority |
| * to cause a lost local interrupt. |
| * 5AP. Remote read is never used |
| * 6AP. not affected - worked around in hardware |
| * 7AP. not affected - worked around in hardware |
| * 8AP. worked around in hardware - we get explicit CS errors if not |
| * 9AP. only 'noapic' mode affected. Might generate spurious |
| * interrupts, we log only the first one and count the |
| * rest silently. |
| * 10AP. not affected - worked around in hardware |
| * 11AP. Linux reads the APIC between writes to avoid this, as per |
| * the documentation. Make sure you preserve this as it affects |
| * the C stepping chips too. |
| * 12AP. not affected - worked around in hardware |
| * 13AP. not affected - worked around in hardware |
| * 14AP. we always deassert INIT during bootup |
| * 15AP. not affected - worked around in hardware |
| * 16AP. not affected - worked around in hardware |
| * 17AP. not affected - worked around in hardware |
| * 18AP. not affected - worked around in hardware |
| * 19AP. not affected - worked around in BIOS |
| * |
| * If this sounds worrying believe me these bugs are either ___RARE___, |
| * or are signal timing bugs worked around in hardware and there's |
| * about nothing of note with C stepping upwards. |
| */ |
| |
| static atomic_t stopping_cpu = ATOMIC_INIT(-1); |
| static bool smp_no_nmi_ipi = false; |
| |
| static int smp_stop_nmi_callback(unsigned int val, struct pt_regs *regs) |
| { |
| /* We are registered on stopping cpu too, avoid spurious NMI */ |
| if (raw_smp_processor_id() == atomic_read(&stopping_cpu)) |
| return NMI_HANDLED; |
| |
| cpu_emergency_disable_virtualization(); |
| stop_this_cpu(NULL); |
| |
| return NMI_HANDLED; |
| } |
| |
| /* |
| * this function calls the 'stop' function on all other CPUs in the system. |
| */ |
| DEFINE_IDTENTRY_SYSVEC(sysvec_reboot) |
| { |
| apic_eoi(); |
| cpu_emergency_disable_virtualization(); |
| stop_this_cpu(NULL); |
| } |
| |
| static int register_stop_handler(void) |
| { |
| return register_nmi_handler(NMI_LOCAL, smp_stop_nmi_callback, |
| NMI_FLAG_FIRST, "smp_stop"); |
| } |
| |
| static void native_stop_other_cpus(int wait) |
| { |
| unsigned int old_cpu, this_cpu; |
| unsigned long flags, timeout; |
| |
| if (reboot_force) |
| return; |
| |
| /* Only proceed if this is the first CPU to reach this code */ |
| old_cpu = -1; |
| this_cpu = smp_processor_id(); |
| if (!atomic_try_cmpxchg(&stopping_cpu, &old_cpu, this_cpu)) |
| return; |
| |
| /* For kexec, ensure that offline CPUs are out of MWAIT and in HLT */ |
| if (kexec_in_progress) |
| smp_kick_mwait_play_dead(); |
| |
| /* |
| * 1) Send an IPI on the reboot vector to all other CPUs. |
| * |
| * The other CPUs should react on it after leaving critical |
| * sections and re-enabling interrupts. They might still hold |
| * locks, but there is nothing which can be done about that. |
| * |
| * 2) Wait for all other CPUs to report that they reached the |
| * HLT loop in stop_this_cpu() |
| * |
| * 3) If #2 timed out send an NMI to the CPUs which did not |
| * yet report |
| * |
| * 4) Wait for all other CPUs to report that they reached the |
| * HLT loop in stop_this_cpu() |
| * |
| * #3 can obviously race against a CPU reaching the HLT loop late. |
| * That CPU will have reported already and the "have all CPUs |
| * reached HLT" condition will be true despite the fact that the |
| * other CPU is still handling the NMI. Again, there is no |
| * protection against that as "disabled" APICs still respond to |
| * NMIs. |
| */ |
| cpumask_copy(&cpus_stop_mask, cpu_online_mask); |
| cpumask_clear_cpu(this_cpu, &cpus_stop_mask); |
| |
| if (!cpumask_empty(&cpus_stop_mask)) { |
| apic_send_IPI_allbutself(REBOOT_VECTOR); |
| |
| /* |
| * Don't wait longer than a second for IPI completion. The |
| * wait request is not checked here because that would |
| * prevent an NMI shutdown attempt in case that not all |
| * CPUs reach shutdown state. |
| */ |
| timeout = USEC_PER_SEC; |
| while (!cpumask_empty(&cpus_stop_mask) && timeout--) |
| udelay(1); |
| } |
| |
| /* if the REBOOT_VECTOR didn't work, try with the NMI */ |
| if (!cpumask_empty(&cpus_stop_mask)) { |
| /* |
| * If NMI IPI is enabled, try to register the stop handler |
| * and send the IPI. In any case try to wait for the other |
| * CPUs to stop. |
| */ |
| if (!smp_no_nmi_ipi && !register_stop_handler()) { |
| unsigned int cpu; |
| |
| pr_emerg("Shutting down cpus with NMI\n"); |
| |
| for_each_cpu(cpu, &cpus_stop_mask) |
| __apic_send_IPI(cpu, NMI_VECTOR); |
| } |
| /* |
| * Don't wait longer than 10 ms if the caller didn't |
| * request it. If wait is true, the machine hangs here if |
| * one or more CPUs do not reach shutdown state. |
| */ |
| timeout = USEC_PER_MSEC * 10; |
| while (!cpumask_empty(&cpus_stop_mask) && (wait || timeout--)) |
| udelay(1); |
| } |
| |
| local_irq_save(flags); |
| disable_local_APIC(); |
| mcheck_cpu_clear(this_cpu_ptr(&cpu_info)); |
| local_irq_restore(flags); |
| |
| /* |
| * Ensure that the cpus_stop_mask cache lines are invalidated on |
| * the other CPUs. See comment vs. SME in stop_this_cpu(). |
| */ |
| cpumask_clear(&cpus_stop_mask); |
| } |
| |
| /* |
| * Reschedule call back. KVM uses this interrupt to force a cpu out of |
| * guest mode. |
| */ |
| DEFINE_IDTENTRY_SYSVEC_SIMPLE(sysvec_reschedule_ipi) |
| { |
| apic_eoi(); |
| trace_reschedule_entry(RESCHEDULE_VECTOR); |
| inc_irq_stat(irq_resched_count); |
| scheduler_ipi(); |
| trace_reschedule_exit(RESCHEDULE_VECTOR); |
| } |
| |
| DEFINE_IDTENTRY_SYSVEC(sysvec_call_function) |
| { |
| apic_eoi(); |
| trace_call_function_entry(CALL_FUNCTION_VECTOR); |
| inc_irq_stat(irq_call_count); |
| generic_smp_call_function_interrupt(); |
| trace_call_function_exit(CALL_FUNCTION_VECTOR); |
| } |
| |
| DEFINE_IDTENTRY_SYSVEC(sysvec_call_function_single) |
| { |
| apic_eoi(); |
| trace_call_function_single_entry(CALL_FUNCTION_SINGLE_VECTOR); |
| inc_irq_stat(irq_call_count); |
| generic_smp_call_function_single_interrupt(); |
| trace_call_function_single_exit(CALL_FUNCTION_SINGLE_VECTOR); |
| } |
| |
| static int __init nonmi_ipi_setup(char *str) |
| { |
| smp_no_nmi_ipi = true; |
| return 1; |
| } |
| |
| __setup("nonmi_ipi", nonmi_ipi_setup); |
| |
| struct smp_ops smp_ops = { |
| .smp_prepare_boot_cpu = native_smp_prepare_boot_cpu, |
| .smp_prepare_cpus = native_smp_prepare_cpus, |
| .smp_cpus_done = native_smp_cpus_done, |
| |
| .stop_other_cpus = native_stop_other_cpus, |
| #if defined(CONFIG_KEXEC_CORE) |
| .crash_stop_other_cpus = kdump_nmi_shootdown_cpus, |
| #endif |
| .smp_send_reschedule = native_smp_send_reschedule, |
| |
| .kick_ap_alive = native_kick_ap, |
| .cpu_disable = native_cpu_disable, |
| .play_dead = native_play_dead, |
| |
| .send_call_func_ipi = native_send_call_func_ipi, |
| .send_call_func_single_ipi = native_send_call_func_single_ipi, |
| }; |
| EXPORT_SYMBOL_GPL(smp_ops); |