Google Git
Sign in
android-kvm / linux / 69ddba9d170bdaee1dc0eb4ced38d7e4bb7b92af / . / drivers / net / dsa / microchip / ksz9477_acl.c
blob: 7ba778df63acef989b11b10e7d7d61ff9e4993b7 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2023 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
/* Access Control List (ACL) structure:
*
* There are multiple groups of registers involved in ACL configuration:
*
* - Matching Rules: These registers define the criteria for matching incoming
* packets based on their header information (Layer 2 MAC, Layer 3 IP, or
* Layer 4 TCP/UDP). Different register settings are used depending on the
* matching rule mode (MD) and the Enable (ENB) settings.
*
* - Action Rules: These registers define how the ACL should modify the packet's
* priority, VLAN tag priority, and forwarding map once a matching rule has
* been triggered. The settings vary depending on whether the matching rule is
* in Count Mode (MD = 01 and ENB = 00) or not.
*
* - Processing Rules: These registers control the overall behavior of the ACL,
* such as selecting which matching rule to apply first, enabling/disabling
* specific rules, or specifying actions for matched packets.
*
* ACL Structure:
* +----------------------+
* +----------------------+ | (optional) |
* | Matching Rules | | Matching Rules |
* | (Layer 2, 3, 4) | | (Layer 2, 3, 4) |
* +----------------------+ +----------------------+
* | |
* \___________________________/
* v
* +----------------------+
* | Processing Rules |
* | (action idx, |
* | matching rule set) |
* +----------------------+
* |
* v
* +----------------------+
* | Action Rules |
* | (Modify Priority, |
* | Forwarding Map, |
* | VLAN tag, etc) |
* +----------------------+
*/
#include <linux/bitops.h>
#include "ksz9477.h"
#include "ksz9477_reg.h"
#include "ksz_common.h"
#define KSZ9477_PORT_ACL_0 0x600
enum ksz9477_acl_port_access {
KSZ9477_ACL_PORT_ACCESS_0 = 0x00,
KSZ9477_ACL_PORT_ACCESS_1 = 0x01,
KSZ9477_ACL_PORT_ACCESS_2 = 0x02,
KSZ9477_ACL_PORT_ACCESS_3 = 0x03,
KSZ9477_ACL_PORT_ACCESS_4 = 0x04,
KSZ9477_ACL_PORT_ACCESS_5 = 0x05,
KSZ9477_ACL_PORT_ACCESS_6 = 0x06,
KSZ9477_ACL_PORT_ACCESS_7 = 0x07,
KSZ9477_ACL_PORT_ACCESS_8 = 0x08,
KSZ9477_ACL_PORT_ACCESS_9 = 0x09,
KSZ9477_ACL_PORT_ACCESS_A = 0x0A,
KSZ9477_ACL_PORT_ACCESS_B = 0x0B,
KSZ9477_ACL_PORT_ACCESS_C = 0x0C,
KSZ9477_ACL_PORT_ACCESS_D = 0x0D,
KSZ9477_ACL_PORT_ACCESS_E = 0x0E,
KSZ9477_ACL_PORT_ACCESS_F = 0x0F,
KSZ9477_ACL_PORT_ACCESS_10 = 0x10,
KSZ9477_ACL_PORT_ACCESS_11 = 0x11
};
#define KSZ9477_ACL_MD_MASK GENMASK(5, 4)
#define KSZ9477_ACL_MD_DISABLE 0
#define KSZ9477_ACL_MD_L2_MAC 1
#define KSZ9477_ACL_MD_L3_IP 2
#define KSZ9477_ACL_MD_L4_TCP_UDP 3
#define KSZ9477_ACL_ENB_MASK GENMASK(3, 2)
#define KSZ9477_ACL_ENB_L2_COUNTER 0
#define KSZ9477_ACL_ENB_L2_TYPE 1
#define KSZ9477_ACL_ENB_L2_MAC 2
#define KSZ9477_ACL_ENB_L2_MAC_TYPE 3
/* only IPv4 src or dst can be used with mask */
#define KSZ9477_ACL_ENB_L3_IPV4_ADDR_MASK 1
/* only IPv4 src and dst can be used without mask */
#define KSZ9477_ACL_ENB_L3_IPV4_ADDR_SRC_DST 2
#define KSZ9477_ACL_ENB_L4_IP_PROTO 0
#define KSZ9477_ACL_ENB_L4_TCP_SRC_DST_PORT 1
#define KSZ9477_ACL_ENB_L4_UDP_SRC_DST_PORT 2
#define KSZ9477_ACL_ENB_L4_TCP_SEQ_NUMBER 3
#define KSZ9477_ACL_SD_SRC BIT(1)
#define KSZ9477_ACL_SD_DST 0
#define KSZ9477_ACL_EQ_EQUAL BIT(0)
#define KSZ9477_ACL_EQ_NOT_EQUAL 0
#define KSZ9477_ACL_PM_M GENMASK(7, 6)
#define KSZ9477_ACL_PM_DISABLE 0
#define KSZ9477_ACL_PM_HIGHER 1
#define KSZ9477_ACL_PM_LOWER 2
#define KSZ9477_ACL_PM_REPLACE 3
#define KSZ9477_ACL_P_M GENMASK(5, 3)
#define KSZ9477_PORT_ACL_CTRL_0 0x0612
#define KSZ9477_ACL_WRITE_DONE BIT(6)
#define KSZ9477_ACL_READ_DONE BIT(5)
#define KSZ9477_ACL_WRITE BIT(4)
#define KSZ9477_ACL_INDEX_M GENMASK(3, 0)
/**
* ksz9477_dump_acl_index - Print the ACL entry at the specified index
*
* @dev: Pointer to the ksz9477 device structure.
* @acle: Pointer to the ACL entry array.
* @index: The index of the ACL entry to print.
*
* This function prints the details of an ACL entry, located at a particular
* index within the ksz9477 device's ACL table. It omits printing entries that
* are empty.
*
* Return: 1 if the entry is non-empty and printed, 0 otherwise.
*/
static int ksz9477_dump_acl_index(struct ksz_device *dev,
struct ksz9477_acl_entry *acle, int index)
{
bool empty = true;
char buf[64];
u8 *entry;
int i;
entry = &acle[index].entry[0];
for (i = 0; i <= KSZ9477_ACL_PORT_ACCESS_11; i++) {
if (entry[i])
empty = false;
sprintf(buf + (i * 3), "%02x ", entry[i]);
}
/* no need to print empty entries */
if (empty)
return 0;
dev_err(dev->dev, " Entry %02d, prio: %02d : %s", index,
acle[index].prio, buf);
return 1;
}
/**
* ksz9477_dump_acl - Print ACL entries
*
* @dev: Pointer to the device structure.
* @acle: Pointer to the ACL entry array.
*/
static void ksz9477_dump_acl(struct ksz_device *dev,
struct ksz9477_acl_entry *acle)
{
int count = 0;
int i;
for (i = 0; i < KSZ9477_ACL_MAX_ENTRIES; i++)
count += ksz9477_dump_acl_index(dev, acle, i);
if (count != KSZ9477_ACL_MAX_ENTRIES - 1)
dev_err(dev->dev, " Empty ACL entries were skipped\n");
}
/**
* ksz9477_acl_is_valid_matching_rule - Check if an ACL entry contains a valid
* matching rule.
*
* @entry: Pointer to ACL entry buffer
*
* This function checks if the given ACL entry buffer contains a valid
* matching rule by inspecting the Mode (MD) and Enable (ENB) fields.
*
* Returns: True if it's a valid matching rule, false otherwise.
*/
static bool ksz9477_acl_is_valid_matching_rule(u8 *entry)
{
u8 val1, md, enb;
val1 = entry[KSZ9477_ACL_PORT_ACCESS_1];
md = FIELD_GET(KSZ9477_ACL_MD_MASK, val1);
if (md == KSZ9477_ACL_MD_DISABLE)
return false;
if (md == KSZ9477_ACL_MD_L2_MAC) {
/* L2 counter is not support, so it is not valid rule for now */
enb = FIELD_GET(KSZ9477_ACL_ENB_MASK, val1);
if (enb == KSZ9477_ACL_ENB_L2_COUNTER)
return false;
}
return true;
}
/**
* ksz9477_acl_get_cont_entr - Get count of contiguous ACL entries and validate
* the matching rules.
* @dev: Pointer to the KSZ9477 device structure.
* @port: Port number.
* @index: Index of the starting ACL entry.
*
* Based on the KSZ9477 switch's Access Control List (ACL) system, the RuleSet
* in an ACL entry indicates which entries contain Matching rules linked to it.
* This RuleSet is represented by two registers: KSZ9477_ACL_PORT_ACCESS_E and
* KSZ9477_ACL_PORT_ACCESS_F. Each bit set in these registers corresponds to
* an entry containing a Matching rule for this RuleSet.
*
* For a single Matching rule linked, only one bit is set. However, when an
* entry links multiple Matching rules, forming what's termed a 'complex rule',
* multiple bits are set in these registers.
*
* This function checks that, for complex rules, the entries containing the
* linked Matching rules are contiguous in terms of their indices. It calculates
* and returns the number of these contiguous entries.
*
* Returns:
* - 0 if the entry is empty and can be safely overwritten
* - 1 if the entry represents a simple rule
* - The number of contiguous entries if it is the root entry of a complex
* rule
* - -ENOTEMPTY if the entry is part of a complex rule but not the root
* entry
* - -EINVAL if the validation fails
*/
static int ksz9477_acl_get_cont_entr(struct ksz_device *dev, int port,
int index)
{
struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv;
struct ksz9477_acl_entries *acles = &acl->acles;
int start_idx, end_idx, contiguous_count;
unsigned long val;
u8 vale, valf;
u8 *entry;
int i;
entry = &acles->entries[index].entry[0];
vale = entry[KSZ9477_ACL_PORT_ACCESS_E];
valf = entry[KSZ9477_ACL_PORT_ACCESS_F];
val = (vale << 8) | valf;
/* If no bits are set, return an appropriate value or error */
if (!val) {
if (ksz9477_acl_is_valid_matching_rule(entry)) {
/* Looks like we are about to corrupt some complex rule.
* Do not print an error here, as this is a normal case
* when we are trying to find a free or starting entry.
*/
dev_dbg(dev->dev, "ACL: entry %d starting with a valid matching rule, but no bits set in RuleSet\n",
index);
return -ENOTEMPTY;
}
/* This entry does not contain a valid matching rule */
return 0;
}
start_idx = find_first_bit((unsigned long *)&val, 16);
end_idx = find_last_bit((unsigned long *)&val, 16);
/* Calculate the contiguous count */
contiguous_count = end_idx - start_idx + 1;
/* Check if the number of bits set in val matches our calculated count */
if (contiguous_count != hweight16(val)) {
/* Probably we have a fragmented complex rule, which is not
* supported by this driver.
*/
dev_err(dev->dev, "ACL: number of bits set in RuleSet does not match calculated count\n");
return -EINVAL;
}
/* loop over the contiguous entries and check for valid matching rules */
for (i = start_idx; i <= end_idx; i++) {
u8 *current_entry = &acles->entries[i].entry[0];
if (!ksz9477_acl_is_valid_matching_rule(current_entry)) {
/* we have something linked without a valid matching
* rule. ACL table?
*/
dev_err(dev->dev, "ACL: entry %d does not contain a valid matching rule\n",
i);
return -EINVAL;
}
if (i > start_idx) {
vale = current_entry[KSZ9477_ACL_PORT_ACCESS_E];
valf = current_entry[KSZ9477_ACL_PORT_ACCESS_F];
/* Following entry should have empty linkage list */
if (vale || valf) {
dev_err(dev->dev, "ACL: entry %d has non-empty RuleSet linkage\n",
i);
return -EINVAL;
}
}
}
return contiguous_count;
}
/**
* ksz9477_acl_update_linkage - Update the RuleSet linkage for an ACL entry
* after a move operation.
*
* @dev: Pointer to the ksz_device.
* @entry: Pointer to the ACL entry array.
* @old_idx: The original index of the ACL entry before moving.
* @new_idx: The new index of the ACL entry after moving.
*
* This function updates the RuleSet linkage bits for an ACL entry when
* it's moved from one position to another in the ACL table. The RuleSet
* linkage is represented by two 8-bit registers, which are combined
* into a 16-bit value for easier manipulation. The linkage bits are shifted
* based on the difference between the old and new index. If any bits are lost
* during the shift operation, an error is returned.
*
* Note: Fragmentation within a RuleSet is not supported. Hence, entries must
* be moved as complete blocks, maintaining the integrity of the RuleSet.
*
* Returns: 0 on success, or -EINVAL if any RuleSet linkage bits are lost
* during the move.
*/
static int ksz9477_acl_update_linkage(struct ksz_device *dev, u8 *entry,
u16 old_idx, u16 new_idx)
{
unsigned int original_bit_count;
unsigned long rule_linkage;
u8 vale, valf, val0;
int shift;
val0 = entry[KSZ9477_ACL_PORT_ACCESS_0];
vale = entry[KSZ9477_ACL_PORT_ACCESS_E];
valf = entry[KSZ9477_ACL_PORT_ACCESS_F];
/* Combine the two u8 values into one u16 for easier manipulation */
rule_linkage = (vale << 8) | valf;
original_bit_count = hweight16(rule_linkage);
/* Even if HW is able to handle fragmented RuleSet, we don't support it.
* RuleSet is filled only for the first entry of the set.
*/
if (!rule_linkage)
return 0;
if (val0 != old_idx) {
dev_err(dev->dev, "ACL: entry %d has unexpected ActionRule linkage: %d\n",
old_idx, val0);
return -EINVAL;
}
val0 = new_idx;
/* Calculate the number of positions to shift */
shift = new_idx - old_idx;
/* Shift the RuleSet */
if (shift > 0)
rule_linkage <<= shift;
else
rule_linkage >>= -shift;
/* Check that no bits were lost in the process */
if (original_bit_count != hweight16(rule_linkage)) {
dev_err(dev->dev, "ACL RuleSet linkage bits lost during move\n");
return -EINVAL;
}
entry[KSZ9477_ACL_PORT_ACCESS_0] = val0;
/* Update the RuleSet bitfields in the entry */
entry[KSZ9477_ACL_PORT_ACCESS_E] = (rule_linkage >> 8) & 0xFF;
entry[KSZ9477_ACL_PORT_ACCESS_F] = rule_linkage & 0xFF;
return 0;
}
/**
* ksz9477_validate_and_get_src_count - Validate source and destination indices
* and determine the source entry count.
* @dev: Pointer to the KSZ device structure.
* @port: Port number on the KSZ device where the ACL entries reside.
* @src_idx: Index of the starting ACL entry that needs to be validated.
* @dst_idx: Index of the destination where the source entries are intended to
* be moved.
* @src_count: Pointer to the variable that will hold the number of contiguous
* source entries if the validation passes.
* @dst_count: Pointer to the variable that will hold the number of contiguous
* destination entries if the validation passes.
*
* This function performs validation on the source and destination indices
* provided for ACL entries. It checks if the indices are within the valid
* range, and if the source entries are contiguous. Additionally, the function
* ensures that there's adequate space at the destination for the source entries
* and that the destination index isn't in the middle of a RuleSet. If all
* validations pass, the function returns the number of contiguous source and
* destination entries.
*
* Return: 0 on success, otherwise returns a negative error code if any
* validation check fails.
*/
static int ksz9477_validate_and_get_src_count(struct ksz_device *dev, int port,
int src_idx, int dst_idx,
int *src_count, int *dst_count)
{
int ret;
if (src_idx >= KSZ9477_ACL_MAX_ENTRIES ||
dst_idx >= KSZ9477_ACL_MAX_ENTRIES) {
dev_err(dev->dev, "ACL: invalid entry index\n");
return -EINVAL;
}
/* Validate if the source entries are contiguous */
ret = ksz9477_acl_get_cont_entr(dev, port, src_idx);
if (ret < 0)
return ret;
*src_count = ret;
if (!*src_count) {
dev_err(dev->dev, "ACL: source entry is empty\n");
return -EINVAL;
}
if (dst_idx + *src_count >= KSZ9477_ACL_MAX_ENTRIES) {
dev_err(dev->dev, "ACL: Not enough space at the destination. Move operation will fail.\n");
return -EINVAL;
}
/* Validate if the destination entry is empty or not in the middle of
* a RuleSet.
*/
ret = ksz9477_acl_get_cont_entr(dev, port, dst_idx);
if (ret < 0)
return ret;
*dst_count = ret;
return 0;
}
/**
* ksz9477_move_entries_downwards - Move a range of ACL entries downwards in
* the list.
* @dev: Pointer to the KSZ device structure.
* @acles: Pointer to the structure encapsulating all the ACL entries.
* @start_idx: Starting index of the entries to be relocated.
* @num_entries_to_move: Number of consecutive entries to be relocated.
* @end_idx: Destination index where the first entry should be situated post
* relocation.
*
* This function is responsible for rearranging a specific block of ACL entries
* by shifting them downwards in the list based on the supplied source and
* destination indices. It ensures that the linkage between the ACL entries is
* maintained accurately after the relocation.
*
* Return: 0 on successful relocation of entries, otherwise returns a negative
* error code.
*/
static int ksz9477_move_entries_downwards(struct ksz_device *dev,
struct ksz9477_acl_entries *acles,
u16 start_idx,
u16 num_entries_to_move,
u16 end_idx)
{
struct ksz9477_acl_entry *e;
int ret, i;
for (i = start_idx; i < end_idx; i++) {
e = &acles->entries[i];
*e = acles->entries[i + num_entries_to_move];
ret = ksz9477_acl_update_linkage(dev, &e->entry[0],
i + num_entries_to_move, i);
if (ret < 0)
return ret;
}
return 0;
}
/**
* ksz9477_move_entries_upwards - Move a range of ACL entries upwards in the
* list.
* @dev: Pointer to the KSZ device structure.
* @acles: Pointer to the structure holding all the ACL entries.
* @start_idx: The starting index of the entries to be moved.
* @num_entries_to_move: Number of contiguous entries to be moved.
* @target_idx: The destination index where the first entry should be placed
* after moving.
*
* This function rearranges a chunk of ACL entries by moving them upwards
* in the list based on the given source and destination indices. The reordering
* process preserves the linkage between entries by updating it accordingly.
*
* Return: 0 if the entries were successfully moved, otherwise a negative error
* code.
*/
static int ksz9477_move_entries_upwards(struct ksz_device *dev,
struct ksz9477_acl_entries *acles,
u16 start_idx, u16 num_entries_to_move,
u16 target_idx)
{
struct ksz9477_acl_entry *e;
int ret, i, b;
for (i = start_idx; i > target_idx; i--) {
b = i + num_entries_to_move - 1;
e = &acles->entries[b];
*e = acles->entries[i - 1];
ret = ksz9477_acl_update_linkage(dev, &e->entry[0], i - 1, b);
if (ret < 0)
return ret;
}
return 0;
}
/**
* ksz9477_acl_move_entries - Move a block of contiguous ACL entries from a
* source to a destination index.
* @dev: Pointer to the KSZ9477 device structure.
* @port: Port number.
* @src_idx: Index of the starting source ACL entry.
* @dst_idx: Index of the starting destination ACL entry.
*
* This function aims to move a block of contiguous ACL entries from the source
* index to the destination index while ensuring the integrity and validity of
* the ACL table.
*
* In case of any errors during the adjustments or copying, the function will
* restore the ACL entries to their original state from the backup.
*
* Return: 0 if the move operation is successful. Returns -EINVAL for validation
* errors or other error codes based on specific failure conditions.
*/
static int ksz9477_acl_move_entries(struct ksz_device *dev, int port,
u16 src_idx, u16 dst_idx)
{
struct ksz9477_acl_entry buffer[KSZ9477_ACL_MAX_ENTRIES];
struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv;
struct ksz9477_acl_entries *acles = &acl->acles;
int src_count, ret, dst_count;
/* Nothing to do */
if (src_idx == dst_idx)
return 0;
ret = ksz9477_validate_and_get_src_count(dev, port, src_idx, dst_idx,
&src_count, &dst_count);
if (ret)
return ret;
/* In case dst_index is greater than src_index, we need to adjust the
* destination index to account for the entries that will be moved
* downwards and the size of the entry located at dst_idx.
*/
if (dst_idx > src_idx)
dst_idx = dst_idx + dst_count - src_count;
/* Copy source block to buffer and update its linkage */
for (int i = 0; i < src_count; i++) {
buffer[i] = acles->entries[src_idx + i];
ret = ksz9477_acl_update_linkage(dev, &buffer[i].entry[0],
src_idx + i, dst_idx + i);
if (ret < 0)
return ret;
}
/* Adjust other entries and their linkage based on destination */
if (dst_idx > src_idx) {
ret = ksz9477_move_entries_downwards(dev, acles, src_idx,
src_count, dst_idx);
} else {
ret = ksz9477_move_entries_upwards(dev, acles, src_idx,
src_count, dst_idx);
}
if (ret < 0)
return ret;
/* Copy buffer to destination block */
for (int i = 0; i < src_count; i++)
acles->entries[dst_idx + i] = buffer[i];
return 0;
}
/**
* ksz9477_get_next_block_start - Identify the starting index of the next ACL
* block.
* @dev: Pointer to the device structure.
* @port: The port number on which the ACL entries are being checked.
* @start: The starting index from which the search begins.
*
* This function looks for the next valid ACL block starting from the provided
* 'start' index and returns the beginning index of that block. If the block is
* invalid or if it reaches the end of the ACL entries without finding another
* block, it returns the maximum ACL entries count.
*
* Returns:
* - The starting index of the next valid ACL block.
* - KSZ9477_ACL_MAX_ENTRIES if no other valid blocks are found after 'start'.
* - A negative error code if an error occurs while checking.
*/
static int ksz9477_get_next_block_start(struct ksz_device *dev, int port,
int start)
{
int block_size;
for (int i = start; i < KSZ9477_ACL_MAX_ENTRIES;) {
block_size = ksz9477_acl_get_cont_entr(dev, port, i);
if (block_size < 0 && block_size != -ENOTEMPTY)
return block_size;
if (block_size > 0)
return i;
i++;
}
return KSZ9477_ACL_MAX_ENTRIES;
}
/**
* ksz9477_swap_acl_blocks - Swap two ACL blocks
* @dev: Pointer to the device structure.
* @port: The port number on which the ACL blocks are to be swapped.
* @i: The starting index of the first ACL block.
* @j: The starting index of the second ACL block.
*
* This function is used to swap two ACL blocks present at given indices. The
* main purpose is to aid in the sorting and reordering of ACL blocks based on
* certain criteria, e.g., priority. It checks the validity of the block at
* index 'i', ensuring it's not an empty block, and then proceeds to swap it
* with the block at index 'j'.
*
* Returns:
* - 0 on successful swapping of blocks.
* - -EINVAL if the block at index 'i' is empty.
* - A negative error code if any other error occurs during the swap.
*/
static int ksz9477_swap_acl_blocks(struct ksz_device *dev, int port, int i,
int j)
{
int ret, current_block_size;
current_block_size = ksz9477_acl_get_cont_entr(dev, port, i);
if (current_block_size < 0)
return current_block_size;
if (!current_block_size) {
dev_err(dev->dev, "ACL: swapping empty entry %d\n", i);
return -EINVAL;
}
ret = ksz9477_acl_move_entries(dev, port, i, j);
if (ret)
return ret;
ret = ksz9477_acl_move_entries(dev, port, j - current_block_size, i);
if (ret)
return ret;
return 0;
}
/**
* ksz9477_sort_acl_entr_no_back - Sort ACL entries for a given port based on
* priority without backing up entries.
* @dev: Pointer to the device structure.
* @port: The port number whose ACL entries need to be sorted.
*
* This function sorts ACL entries of the specified port using a variant of the
* bubble sort algorithm. It operates on blocks of ACL entries rather than
* individual entries. Each block's starting point is identified and then
* compared with subsequent blocks based on their priority. If the current
* block has a lower priority than the subsequent block, the two blocks are
* swapped.
*
* This is done in order to maintain an organized order of ACL entries based on
* priority, ensuring efficient and predictable ACL rule application.
*
* Returns:
* - 0 on successful sorting of entries.
* - A negative error code if any issue arises during sorting, e.g.,
* if the function is unable to get the next block start.
*/
static int ksz9477_sort_acl_entr_no_back(struct ksz_device *dev, int port)
{
struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv;
struct ksz9477_acl_entries *acles = &acl->acles;
struct ksz9477_acl_entry *curr, *next;
int i, j, ret;
/* Bubble sort */
for (i = 0; i < KSZ9477_ACL_MAX_ENTRIES;) {
curr = &acles->entries[i];
j = ksz9477_get_next_block_start(dev, port, i + 1);
if (j < 0)
return j;
while (j < KSZ9477_ACL_MAX_ENTRIES) {
next = &acles->entries[j];
if (curr->prio > next->prio) {
ret = ksz9477_swap_acl_blocks(dev, port, i, j);
if (ret)
return ret;
}
j = ksz9477_get_next_block_start(dev, port, j + 1);
if (j < 0)
return j;
}
i = ksz9477_get_next_block_start(dev, port, i + 1);
if (i < 0)
return i;
}
return 0;
}
/**
* ksz9477_sort_acl_entries - Sort the ACL entries for a given port.
* @dev: Pointer to the KSZ device.
* @port: Port number.
*
* This function sorts the Access Control List (ACL) entries for a specified
* port. Before sorting, a backup of the original entries is created. If the
* sorting process fails, the function will log error messages displaying both
* the original and attempted sorted entries, and then restore the original
* entries from the backup.
*
* Return: 0 if the sorting succeeds, otherwise a negative error code.
*/
int ksz9477_sort_acl_entries(struct ksz_device *dev, int port)
{
struct ksz9477_acl_entry backup[KSZ9477_ACL_MAX_ENTRIES];
struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv;
struct ksz9477_acl_entries *acles = &acl->acles;
int ret;
/* create a backup of the ACL entries, if something goes wrong
* we can restore the ACL entries.
*/
memcpy(backup, acles->entries, sizeof(backup));
ret = ksz9477_sort_acl_entr_no_back(dev, port);
if (ret) {
dev_err(dev->dev, "ACL: failed to sort entries for port %d\n",
port);
dev_err(dev->dev, "ACL dump before sorting:\n");
ksz9477_dump_acl(dev, backup);
dev_err(dev->dev, "ACL dump after sorting:\n");
ksz9477_dump_acl(dev, acles->entries);
/* Restore the original entries */
memcpy(acles->entries, backup, sizeof(backup));
}
return ret;
}
/**
* ksz9477_acl_wait_ready - Waits for the ACL operation to complete on a given
* port.
* @dev: The ksz_device instance.
* @port: The port number to wait for.
*
* This function checks if the ACL write or read operation is completed by
* polling the specified register.
*
* Returns: 0 if the operation is successful, or a negative error code if an
* error occurs.
*/
static int ksz9477_acl_wait_ready(struct ksz_device *dev, int port)
{
unsigned int wr_mask = KSZ9477_ACL_WRITE_DONE | KSZ9477_ACL_READ_DONE;
unsigned int val, reg;
int ret;
reg = dev->dev_ops->get_port_addr(port, KSZ9477_PORT_ACL_CTRL_0);
ret = regmap_read_poll_timeout(dev->regmap[0], reg, val,
(val & wr_mask) == wr_mask, 1000, 10000);
if (ret)
dev_err(dev->dev, "Failed to read/write ACL table\n");
return ret;
}
/**
* ksz9477_acl_entry_write - Writes an ACL entry to a given port at the
* specified index.
* @dev: The ksz_device instance.
* @port: The port number to write the ACL entry to.
* @entry: A pointer to the ACL entry data.
* @idx: The index at which to write the ACL entry.
*
* This function writes the provided ACL entry to the specified port at the
* given index.
*
* Returns: 0 if the operation is successful, or a negative error code if an
* error occurs.
*/
static int ksz9477_acl_entry_write(struct ksz_device *dev, int port, u8 *entry,
int idx)
{
int ret, i;
u8 val;
for (i = 0; i < KSZ9477_ACL_ENTRY_SIZE; i++) {
ret = ksz_pwrite8(dev, port, KSZ9477_PORT_ACL_0 + i, entry[i]);
if (ret) {
dev_err(dev->dev, "Failed to write ACL entry %d\n", i);
return ret;
}
}
/* write everything down */
val = FIELD_PREP(KSZ9477_ACL_INDEX_M, idx) | KSZ9477_ACL_WRITE;
ret = ksz_pwrite8(dev, port, KSZ9477_PORT_ACL_CTRL_0, val);
if (ret)
return ret;
/* wait until everything is written */
return ksz9477_acl_wait_ready(dev, port);
}
/**
* ksz9477_acl_port_enable - Enables ACL functionality on a given port.
* @dev: The ksz_device instance.
* @port: The port number on which to enable ACL functionality.
*
* This function enables ACL functionality on the specified port by configuring
* the appropriate control registers. It returns 0 if the operation is
* successful, or a negative error code if an error occurs.
*
* 0xn801 - KSZ9477S 5.2.8.2 Port Priority Control Register
* Bit 7 - Highest Priority
* Bit 6 - OR'ed Priority
* Bit 4 - MAC Address Priority Classification
* Bit 3 - VLAN Priority Classification
* Bit 2 - 802.1p Priority Classification
* Bit 1 - Diffserv Priority Classification
* Bit 0 - ACL Priority Classification
*
* Current driver implementation sets 802.1p priority classification by default.
* In this function we add ACL priority classification with OR'ed priority.
* According to testing, priority set by ACL will supersede the 802.1p priority.
*
* 0xn803 - KSZ9477S 5.2.8.4 Port Authentication Control Register
* Bit 2 - Access Control List (ACL) Enable
* Bits 1:0 - Authentication Mode
* 00 = Reserved
* 01 = Block Mode. Authentication is enabled. When ACL is
* enabled, all traffic that misses the ACL rules is
* blocked; otherwise ACL actions apply.
* 10 = Pass Mode. Authentication is disabled. When ACL is
* enabled, all traffic that misses the ACL rules is
* forwarded; otherwise ACL actions apply.
* 11 = Trap Mode. Authentication is enabled. All traffic is
* forwarded to the host port. When ACL is enabled, all
* traffic that misses the ACL rules is blocked; otherwise
* ACL actions apply.
*
* We are using Pass Mode int this function.
*
* Returns: 0 if the operation is successful, or a negative error code if an
* error occurs.
*/
static int ksz9477_acl_port_enable(struct ksz_device *dev, int port)
{
int ret;
ret = ksz_prmw8(dev, port, P_PRIO_CTRL, 0, PORT_ACL_PRIO_ENABLE |
PORT_OR_PRIO);
if (ret)
return ret;
return ksz_pwrite8(dev, port, REG_PORT_MRI_AUTHEN_CTRL,
PORT_ACL_ENABLE |
FIELD_PREP(PORT_AUTHEN_MODE, PORT_AUTHEN_PASS));
}
/**
* ksz9477_acl_port_disable - Disables ACL functionality on a given port.
* @dev: The ksz_device instance.
* @port: The port number on which to disable ACL functionality.
*
* This function disables ACL functionality on the specified port by writing a
* value of 0 to the REG_PORT_MRI_AUTHEN_CTRL control register and remove
* PORT_ACL_PRIO_ENABLE bit from P_PRIO_CTRL register.
*
* Returns: 0 if the operation is successful, or a negative error code if an
* error occurs.
*/
static int ksz9477_acl_port_disable(struct ksz_device *dev, int port)
{
int ret;
ret = ksz_prmw8(dev, port, P_PRIO_CTRL, PORT_ACL_PRIO_ENABLE, 0);
if (ret)
return ret;
return ksz_pwrite8(dev, port, REG_PORT_MRI_AUTHEN_CTRL, 0);
}
/**
* ksz9477_acl_write_list - Write a list of ACL entries to a given port.
* @dev: The ksz_device instance.
* @port: The port number on which to write ACL entries.
*
* This function enables ACL functionality on the specified port, writes a list
* of ACL entries to the port, and disables ACL functionality if there are no
* entries.
*
* Returns: 0 if the operation is successful, or a negative error code if an
* error occurs.
*/
int ksz9477_acl_write_list(struct ksz_device *dev, int port)
{
struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv;
struct ksz9477_acl_entries *acles = &acl->acles;
int ret, i;
/* ACL should be enabled before writing entries */
ret = ksz9477_acl_port_enable(dev, port);
if (ret)
return ret;
/* write all entries */
for (i = 0; i < ARRAY_SIZE(acles->entries); i++) {
u8 *entry = acles->entries[i].entry;
/* Check if entry was removed and should be zeroed.
* If last fields of the entry are not zero, it means
* it is removed locally but currently not synced with the HW.
* So, we will write it down to the HW to remove it.
*/
if (i >= acles->entries_count &&
entry[KSZ9477_ACL_PORT_ACCESS_10] == 0 &&
entry[KSZ9477_ACL_PORT_ACCESS_11] == 0)
continue;
ret = ksz9477_acl_entry_write(dev, port, entry, i);
if (ret)
return ret;
/* now removed entry is clean on HW side, so it can
* in the cache too
*/
if (i >= acles->entries_count &&
entry[KSZ9477_ACL_PORT_ACCESS_10] != 0 &&
entry[KSZ9477_ACL_PORT_ACCESS_11] != 0) {
entry[KSZ9477_ACL_PORT_ACCESS_10] = 0;
entry[KSZ9477_ACL_PORT_ACCESS_11] = 0;
}
}
if (!acles->entries_count)
return ksz9477_acl_port_disable(dev, port);
return 0;
}
/**
* ksz9477_acl_remove_entries - Remove ACL entries with a given cookie from a
* specified ksz9477_acl_entries structure.
* @dev: The ksz_device instance.
* @port: The port number on which to remove ACL entries.
* @acles: The ksz9477_acl_entries instance.
* @cookie: The cookie value to match for entry removal.
*
* This function iterates through the entries array, removing any entries with
* a matching cookie value. The remaining entries are then shifted down to fill
* the gap.
*/
void ksz9477_acl_remove_entries(struct ksz_device *dev, int port,
struct ksz9477_acl_entries *acles,
unsigned long cookie)
{
int entries_count = acles->entries_count;
int ret, i, src_count;
int src_idx = -1;
if (!entries_count)
return;
/* Search for the first position with the cookie */
for (i = 0; i < entries_count; i++) {
if (acles->entries[i].cookie == cookie) {
src_idx = i;
break;
}
}
/* No entries with the matching cookie found */
if (src_idx == -1)
return;
/* Get the size of the cookie entry. We may have complex entries. */
src_count = ksz9477_acl_get_cont_entr(dev, port, src_idx);
if (src_count <= 0)
return;
/* Move all entries down to overwrite removed entry with the cookie */
ret = ksz9477_move_entries_downwards(dev, acles, src_idx,
src_count,
entries_count - src_count);
if (ret) {
dev_err(dev->dev, "Failed to move ACL entries down\n");
return;
}
/* Overwrite new empty places at the end of the list with zeros to make
* sure not unexpected things will happen or no unexplored quirks will
* come out.
*/
for (i = entries_count - src_count; i < entries_count; i++) {
struct ksz9477_acl_entry *entry = &acles->entries[i];
memset(entry, 0, sizeof(*entry));
/* Set all access bits to be able to write zeroed entry to HW */
entry->entry[KSZ9477_ACL_PORT_ACCESS_10] = 0xff;
entry->entry[KSZ9477_ACL_PORT_ACCESS_11] = 0xff;
}
/* Adjust the total entries count */
acles->entries_count -= src_count;
}
/**
* ksz9477_port_acl_init - Initialize the ACL for a specified port on a ksz
* device.
* @dev: The ksz_device instance.
* @port: The port number to initialize the ACL for.
*
* This function allocates memory for an acl structure, associates it with the
* specified port, and initializes the ACL entries to a default state. The
* entries are then written using the ksz9477_acl_write_list function, ensuring
* the ACL has a predictable initial hardware state.
*
* Returns: 0 on success, or an error code on failure.
*/
int ksz9477_port_acl_init(struct ksz_device *dev, int port)
{
struct ksz9477_acl_entries *acles;
struct ksz9477_acl_priv *acl;
int ret, i;
acl = kzalloc(sizeof(*acl), GFP_KERNEL);
if (!acl)
return -ENOMEM;
dev->ports[port].acl_priv = acl;
acles = &acl->acles;
/* write all entries */
for (i = 0; i < ARRAY_SIZE(acles->entries); i++) {
u8 *entry = acles->entries[i].entry;
/* Set all access bits to be able to write zeroed
* entry
*/
entry[KSZ9477_ACL_PORT_ACCESS_10] = 0xff;
entry[KSZ9477_ACL_PORT_ACCESS_11] = 0xff;
}
ret = ksz9477_acl_write_list(dev, port);
if (ret)
goto free_acl;
return 0;
free_acl:
kfree(dev->ports[port].acl_priv);
dev->ports[port].acl_priv = NULL;
return ret;
}
/**
* ksz9477_port_acl_free - Free the ACL resources for a specified port on a ksz
* device.
* @dev: The ksz_device instance.
* @port: The port number to initialize the ACL for.
*
* This disables the ACL for the specified port and frees the associated memory,
*/
void ksz9477_port_acl_free(struct ksz_device *dev, int port)
{
if (!dev->ports[port].acl_priv)
return;
ksz9477_acl_port_disable(dev, port);
kfree(dev->ports[port].acl_priv);
dev->ports[port].acl_priv = NULL;
}
/**
* ksz9477_acl_set_reg - Set entry[16] and entry[17] depending on the updated
* entry[]
* @entry: An array containing the entries
* @reg: The register of the entry that needs to be updated
* @value: The value to be assigned to the updated entry
*
* This function updates the entry[] array based on the provided register and
* value. It also sets entry[0x10] and entry[0x11] according to the ACL byte
* enable rules.
*
* 0x10 - Byte Enable [15:8]
*
* Each bit enables accessing one of the ACL bytes when a read or write is
* initiated by writing to the Port ACL Byte Enable LSB Register.
* Bit 0 applies to the Port ACL Access 7 Register
* Bit 1 applies to the Port ACL Access 6 Register, etc.
* Bit 7 applies to the Port ACL Access 0 Register
* 1 = Byte is selected for read/write
* 0 = Byte is not selected
*
* 0x11 - Byte Enable [7:0]
*
* Each bit enables accessing one of the ACL bytes when a read or write is
* initiated by writing to the Port ACL Byte Enable LSB Register.
* Bit 0 applies to the Port ACL Access F Register
* Bit 1 applies to the Port ACL Access E Register, etc.
* Bit 7 applies to the Port ACL Access 8 Register
* 1 = Byte is selected for read/write
* 0 = Byte is not selected
*/
static void ksz9477_acl_set_reg(u8 *entry, enum ksz9477_acl_port_access reg,
u8 value)
{
if (reg >= KSZ9477_ACL_PORT_ACCESS_0 &&
reg <= KSZ9477_ACL_PORT_ACCESS_7) {
entry[KSZ9477_ACL_PORT_ACCESS_10] |=
BIT(KSZ9477_ACL_PORT_ACCESS_7 - reg);
} else if (reg >= KSZ9477_ACL_PORT_ACCESS_8 &&
reg <= KSZ9477_ACL_PORT_ACCESS_F) {
entry[KSZ9477_ACL_PORT_ACCESS_11] |=
BIT(KSZ9477_ACL_PORT_ACCESS_F - reg);
} else {
WARN_ON(1);
return;
}
entry[reg] = value;
}
/**
* ksz9477_acl_matching_rule_cfg_l2 - Configure an ACL filtering entry to match
* L2 types of Ethernet frames
* @entry: Pointer to ACL entry buffer
* @ethertype: Ethertype value
* @eth_addr: Pointer to Ethernet address
* @is_src: If true, match the source MAC address; if false, match the
* destination MAC address
*
* This function configures an Access Control List (ACL) filtering
* entry to match Layer 2 types of Ethernet frames based on the provided
* ethertype and Ethernet address. Additionally, it can match either the source
* or destination MAC address depending on the value of the is_src parameter.
*
* Register Descriptions for MD = 01 and ENB != 00 (Layer 2 MAC header
* filtering)
*
* 0x01 - Mode and Enable
* Bits 5:4 - MD (Mode)
* 01 = Layer 2 MAC header or counter filtering
* Bits 3:2 - ENB (Enable)
* 01 = Comparison is performed only on the TYPE value
* 10 = Comparison is performed only on the MAC Address value
* 11 = Both the MAC Address and TYPE are tested
* Bit 1 - S/D (Source / Destination)
* 0 = Destination address
* 1 = Source address
* Bit 0 - EQ (Equal / Not Equal)
* 0 = Not Equal produces true result
* 1 = Equal produces true result
*
* 0x02-0x07 - MAC Address
* 0x02 - MAC Address [47:40]
* 0x03 - MAC Address [39:32]
* 0x04 - MAC Address [31:24]
* 0x05 - MAC Address [23:16]
* 0x06 - MAC Address [15:8]
* 0x07 - MAC Address [7:0]
*
* 0x08-0x09 - EtherType
* 0x08 - EtherType [15:8]
* 0x09 - EtherType [7:0]
*/
static void ksz9477_acl_matching_rule_cfg_l2(u8 *entry, u16 ethertype,
u8 *eth_addr, bool is_src)
{
u8 enb = 0;
u8 val;
if (ethertype)
enb |= KSZ9477_ACL_ENB_L2_TYPE;
if (eth_addr)
enb |= KSZ9477_ACL_ENB_L2_MAC;
val = FIELD_PREP(KSZ9477_ACL_MD_MASK, KSZ9477_ACL_MD_L2_MAC) |
FIELD_PREP(KSZ9477_ACL_ENB_MASK, enb) |
FIELD_PREP(KSZ9477_ACL_SD_SRC, is_src) | KSZ9477_ACL_EQ_EQUAL;
ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_1, val);
if (eth_addr) {
int i;
for (i = 0; i < ETH_ALEN; i++) {
ksz9477_acl_set_reg(entry,
KSZ9477_ACL_PORT_ACCESS_2 + i,
eth_addr[i]);
}
}
ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_8, ethertype >> 8);
ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_9, ethertype & 0xff);
}
/**
* ksz9477_acl_action_rule_cfg - Set action for an ACL entry
* @entry: Pointer to the ACL entry
* @force_prio: If true, force the priority value
* @prio_val: Priority value
*
* This function sets the action for the specified ACL entry. It prepares
* the priority mode and traffic class values and updates the entry's
* action registers accordingly. Currently, there is no port or VLAN PCP
* remapping.
*
* ACL Action Rule Parameters for Non-Count Modes (MD ≠ 01 or ENB ≠ 00)
*
* 0x0A - PM, P, RPE, RP[2:1]
* Bits 7:6 - PM[1:0] - Priority Mode
* 00 = ACL does not specify the packet priority. Priority is
* determined by standard QoS functions.
* 01 = Change packet priority to P[2:0] if it is greater than QoS
* result.
* 10 = Change packet priority to P[2:0] if it is smaller than the
* QoS result.
* 11 = Always change packet priority to P[2:0].
* Bits 5:3 - P[2:0] - Priority value
* Bit 2 - RPE - Remark Priority Enable
* Bits 1:0 - RP[2:1] - Remarked Priority value (bits 2:1)
* 0 = Disable priority remarking
* 1 = Enable priority remarking. VLAN tag priority (PCP) bits are
* replaced by RP[2:0].
*
* 0x0B - RP[0], MM
* Bit 7 - RP[0] - Remarked Priority value (bit 0)
* Bits 6:5 - MM[1:0] - Map Mode
* 00 = No forwarding remapping
* 01 = The forwarding map in FORWARD is OR'ed with the forwarding
* map from the Address Lookup Table.
* 10 = The forwarding map in FORWARD is AND'ed with the forwarding
* map from the Address Lookup Table.
* 11 = The forwarding map in FORWARD replaces the forwarding map
* from the Address Lookup Table.
* 0x0D - FORWARD[n:0]
* Bits 7:0 - FORWARD[n:0] - Forwarding map. Bit 0 = port 1,
* bit 1 = port 2, etc.
* 1 = enable forwarding to this port
* 0 = do not forward to this port
*/
void ksz9477_acl_action_rule_cfg(u8 *entry, bool force_prio, u8 prio_val)
{
u8 prio_mode, val;
if (force_prio)
prio_mode = KSZ9477_ACL_PM_REPLACE;
else
prio_mode = KSZ9477_ACL_PM_DISABLE;
val = FIELD_PREP(KSZ9477_ACL_PM_M, prio_mode) |
FIELD_PREP(KSZ9477_ACL_P_M, prio_val);
ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_A, val);
/* no port or VLAN PCP remapping for now */
ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_B, 0);
ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_D, 0);
}
/**
* ksz9477_acl_processing_rule_set_action - Set the action for the processing
* rule set.
* @entry: Pointer to the ACL entry
* @action_idx: Index of the action to be applied
*
* This function sets the action for the processing rule set by updating the
* appropriate register in the entry. There can be only one action per
* processing rule.
*
* Access Control List (ACL) Processing Rule Registers:
*
* 0x00 - First Rule Number (FRN)
* Bits 3:0 - First Rule Number. Pointer to an Action rule entry.
*/
void ksz9477_acl_processing_rule_set_action(u8 *entry, u8 action_idx)
{
ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_0, action_idx);
}
/**
* ksz9477_acl_processing_rule_add_match - Add a matching rule to the rule set
* @entry: Pointer to the ACL entry
* @match_idx: Index of the matching rule to be added
*
* This function adds a matching rule to the rule set by updating the
* appropriate bits in the entry's rule set registers.
*
* Access Control List (ACL) Processing Rule Registers:
*
* 0x0E - RuleSet [15:8]
* Bits 7:0 - RuleSet [15:8] Specifies a set of one or more Matching rule
* entries. RuleSet has one bit for each of the 16 Matching rule entries.
* If multiple Matching rules are selected, then all conditions will be
* AND'ed to produce a final match result.
* 0 = Matching rule not selected
* 1 = Matching rule selected
*
* 0x0F - RuleSet [7:0]
* Bits 7:0 - RuleSet [7:0]
*/
static void ksz9477_acl_processing_rule_add_match(u8 *entry, u8 match_idx)
{
u8 vale = entry[KSZ9477_ACL_PORT_ACCESS_E];
u8 valf = entry[KSZ9477_ACL_PORT_ACCESS_F];
if (match_idx < 8)
valf |= BIT(match_idx);
else
vale |= BIT(match_idx - 8);
ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_E, vale);
ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_F, valf);
}
/**
* ksz9477_acl_get_init_entry - Get a new uninitialized entry for a specified
* port on a ksz_device.
* @dev: The ksz_device instance.
* @port: The port number to get the uninitialized entry for.
* @cookie: The cookie to associate with the entry.
* @prio: The priority to associate with the entry.
*
* This function retrieves the next available ACL entry for the specified port,
* clears all access flags, and associates it with the current cookie.
*
* Returns: A pointer to the new uninitialized ACL entry.
*/
static struct ksz9477_acl_entry *
ksz9477_acl_get_init_entry(struct ksz_device *dev, int port,
unsigned long cookie, u32 prio)
{
struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv;
struct ksz9477_acl_entries *acles = &acl->acles;
struct ksz9477_acl_entry *entry;
entry = &acles->entries[acles->entries_count];
entry->cookie = cookie;
entry->prio = prio;
/* clear all access flags */
entry->entry[KSZ9477_ACL_PORT_ACCESS_10] = 0;
entry->entry[KSZ9477_ACL_PORT_ACCESS_11] = 0;
return entry;
}
/**
* ksz9477_acl_match_process_l2 - Configure Layer 2 ACL matching rules and
* processing rules.
* @dev: Pointer to the ksz_device.
* @port: Port number.
* @ethtype: Ethernet type.
* @src_mac: Source MAC address.
* @dst_mac: Destination MAC address.
* @cookie: The cookie to associate with the entry.
* @prio: The priority of the entry.
*
* This function sets up matching and processing rules for Layer 2 ACLs.
* It takes into account that only one MAC per entry is supported.
*/
void ksz9477_acl_match_process_l2(struct ksz_device *dev, int port,
u16 ethtype, u8 *src_mac, u8 *dst_mac,
unsigned long cookie, u32 prio)
{
struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv;
struct ksz9477_acl_entries *acles = &acl->acles;
struct ksz9477_acl_entry *entry;
entry = ksz9477_acl_get_init_entry(dev, port, cookie, prio);
/* ACL supports only one MAC per entry */
if (src_mac && dst_mac) {
ksz9477_acl_matching_rule_cfg_l2(entry->entry, ethtype, src_mac,
true);
/* Add both match entries to first processing rule */
ksz9477_acl_processing_rule_add_match(entry->entry,
acles->entries_count);
acles->entries_count++;
ksz9477_acl_processing_rule_add_match(entry->entry,
acles->entries_count);
entry = ksz9477_acl_get_init_entry(dev, port, cookie, prio);
ksz9477_acl_matching_rule_cfg_l2(entry->entry, 0, dst_mac,
false);
acles->entries_count++;
} else {
u8 *mac = src_mac ? src_mac : dst_mac;
bool is_src = src_mac ? true : false;
ksz9477_acl_matching_rule_cfg_l2(entry->entry, ethtype, mac,
is_src);
ksz9477_acl_processing_rule_add_match(entry->entry,
acles->entries_count);
acles->entries_count++;
}
}