| /* |
| * DVB USB framework |
| * |
| * Copyright (C) 2004-6 Patrick Boettcher <patrick.boettcher@desy.de> |
| * Copyright (C) 2012 Antti Palosaari <crope@iki.fi> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| */ |
| |
| #include "dvb_usb_common.h" |
| |
| static int dvb_usbv2_disable_rc_polling; |
| module_param_named(disable_rc_polling, dvb_usbv2_disable_rc_polling, int, 0644); |
| MODULE_PARM_DESC(disable_rc_polling, |
| "disable remote control polling (default: 0)"); |
| static int dvb_usb_force_pid_filter_usage; |
| module_param_named(force_pid_filter_usage, dvb_usb_force_pid_filter_usage, |
| int, 0444); |
| MODULE_PARM_DESC(force_pid_filter_usage, |
| "force all DVB USB devices to use a PID filter, if any (default: 0)"); |
| |
| static int dvb_usbv2_download_firmware(struct dvb_usb_device *d, |
| const char *name) |
| { |
| int ret; |
| const struct firmware *fw; |
| dev_dbg(&d->udev->dev, "%s:\n", __func__); |
| |
| if (!d->props->download_firmware) { |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| ret = request_firmware(&fw, name, &d->udev->dev); |
| if (ret < 0) { |
| dev_err(&d->udev->dev, |
| "%s: Did not find the firmware file '%s'. Please see linux/Documentation/dvb/ for more details on firmware-problems. Status %d\n", |
| KBUILD_MODNAME, name, ret); |
| goto err; |
| } |
| |
| dev_info(&d->udev->dev, "%s: downloading firmware from file '%s'\n", |
| KBUILD_MODNAME, name); |
| |
| ret = d->props->download_firmware(d, fw); |
| release_firmware(fw); |
| if (ret < 0) |
| goto err; |
| |
| return ret; |
| err: |
| dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int dvb_usbv2_i2c_init(struct dvb_usb_device *d) |
| { |
| int ret; |
| dev_dbg(&d->udev->dev, "%s:\n", __func__); |
| |
| if (!d->props->i2c_algo) |
| return 0; |
| |
| strlcpy(d->i2c_adap.name, d->name, sizeof(d->i2c_adap.name)); |
| d->i2c_adap.algo = d->props->i2c_algo; |
| d->i2c_adap.dev.parent = &d->udev->dev; |
| i2c_set_adapdata(&d->i2c_adap, d); |
| |
| ret = i2c_add_adapter(&d->i2c_adap); |
| if (ret < 0) { |
| d->i2c_adap.algo = NULL; |
| dev_err(&d->udev->dev, "%s: i2c_add_adapter() failed=%d\n", |
| KBUILD_MODNAME, ret); |
| goto err; |
| } |
| |
| return 0; |
| err: |
| dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int dvb_usbv2_i2c_exit(struct dvb_usb_device *d) |
| { |
| dev_dbg(&d->udev->dev, "%s:\n", __func__); |
| |
| if (d->i2c_adap.algo) |
| i2c_del_adapter(&d->i2c_adap); |
| |
| return 0; |
| } |
| |
| #if IS_ENABLED(CONFIG_RC_CORE) |
| static void dvb_usb_read_remote_control(struct work_struct *work) |
| { |
| struct dvb_usb_device *d = container_of(work, |
| struct dvb_usb_device, rc_query_work.work); |
| int ret; |
| |
| /* |
| * When the parameter has been set to 1 via sysfs while the |
| * driver was running, or when bulk mode is enabled after IR init. |
| */ |
| if (dvb_usbv2_disable_rc_polling || d->rc.bulk_mode) { |
| d->rc_polling_active = false; |
| return; |
| } |
| |
| ret = d->rc.query(d); |
| if (ret < 0) { |
| dev_err(&d->udev->dev, "%s: rc.query() failed=%d\n", |
| KBUILD_MODNAME, ret); |
| d->rc_polling_active = false; |
| return; /* stop polling */ |
| } |
| |
| schedule_delayed_work(&d->rc_query_work, |
| msecs_to_jiffies(d->rc.interval)); |
| } |
| |
| static int dvb_usbv2_remote_init(struct dvb_usb_device *d) |
| { |
| int ret; |
| struct rc_dev *dev; |
| dev_dbg(&d->udev->dev, "%s:\n", __func__); |
| |
| if (dvb_usbv2_disable_rc_polling || !d->props->get_rc_config) |
| return 0; |
| |
| d->rc.map_name = d->rc_map; |
| ret = d->props->get_rc_config(d, &d->rc); |
| if (ret < 0) |
| goto err; |
| |
| /* disable rc when there is no keymap defined */ |
| if (!d->rc.map_name) |
| return 0; |
| |
| dev = rc_allocate_device(); |
| if (!dev) { |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| dev->dev.parent = &d->udev->dev; |
| dev->input_name = d->name; |
| usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys)); |
| strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys)); |
| dev->input_phys = d->rc_phys; |
| usb_to_input_id(d->udev, &dev->input_id); |
| /* TODO: likely RC-core should took const char * */ |
| dev->driver_name = (char *) d->props->driver_name; |
| dev->map_name = d->rc.map_name; |
| dev->driver_type = d->rc.driver_type; |
| dev->allowed_protocols = d->rc.allowed_protos; |
| dev->change_protocol = d->rc.change_protocol; |
| dev->priv = d; |
| |
| ret = rc_register_device(dev); |
| if (ret < 0) { |
| rc_free_device(dev); |
| goto err; |
| } |
| |
| d->rc_dev = dev; |
| |
| /* start polling if needed */ |
| if (d->rc.query && !d->rc.bulk_mode) { |
| /* initialize a work queue for handling polling */ |
| INIT_DELAYED_WORK(&d->rc_query_work, |
| dvb_usb_read_remote_control); |
| dev_info(&d->udev->dev, |
| "%s: schedule remote query interval to %d msecs\n", |
| KBUILD_MODNAME, d->rc.interval); |
| schedule_delayed_work(&d->rc_query_work, |
| msecs_to_jiffies(d->rc.interval)); |
| d->rc_polling_active = true; |
| } |
| |
| return 0; |
| err: |
| dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int dvb_usbv2_remote_exit(struct dvb_usb_device *d) |
| { |
| dev_dbg(&d->udev->dev, "%s:\n", __func__); |
| |
| if (d->rc_dev) { |
| cancel_delayed_work_sync(&d->rc_query_work); |
| rc_unregister_device(d->rc_dev); |
| d->rc_dev = NULL; |
| } |
| |
| return 0; |
| } |
| #else |
| #define dvb_usbv2_remote_init(args...) 0 |
| #define dvb_usbv2_remote_exit(args...) |
| #endif |
| |
| static void dvb_usb_data_complete(struct usb_data_stream *stream, u8 *buf, |
| size_t len) |
| { |
| struct dvb_usb_adapter *adap = stream->user_priv; |
| dvb_dmx_swfilter(&adap->demux, buf, len); |
| } |
| |
| static void dvb_usb_data_complete_204(struct usb_data_stream *stream, u8 *buf, |
| size_t len) |
| { |
| struct dvb_usb_adapter *adap = stream->user_priv; |
| dvb_dmx_swfilter_204(&adap->demux, buf, len); |
| } |
| |
| static void dvb_usb_data_complete_raw(struct usb_data_stream *stream, u8 *buf, |
| size_t len) |
| { |
| struct dvb_usb_adapter *adap = stream->user_priv; |
| dvb_dmx_swfilter_raw(&adap->demux, buf, len); |
| } |
| |
| static int dvb_usbv2_adapter_stream_init(struct dvb_usb_adapter *adap) |
| { |
| dev_dbg(&adap_to_d(adap)->udev->dev, "%s: adap=%d\n", __func__, |
| adap->id); |
| |
| adap->stream.udev = adap_to_d(adap)->udev; |
| adap->stream.user_priv = adap; |
| adap->stream.complete = dvb_usb_data_complete; |
| |
| return usb_urb_initv2(&adap->stream, &adap->props->stream); |
| } |
| |
| static int dvb_usbv2_adapter_stream_exit(struct dvb_usb_adapter *adap) |
| { |
| dev_dbg(&adap_to_d(adap)->udev->dev, "%s: adap=%d\n", __func__, |
| adap->id); |
| |
| return usb_urb_exitv2(&adap->stream); |
| } |
| |
| static int dvb_usb_start_feed(struct dvb_demux_feed *dvbdmxfeed) |
| { |
| struct dvb_usb_adapter *adap = dvbdmxfeed->demux->priv; |
| struct dvb_usb_device *d = adap_to_d(adap); |
| int ret = 0; |
| struct usb_data_stream_properties stream_props; |
| dev_dbg(&d->udev->dev, |
| "%s: adap=%d active_fe=%d feed_type=%d setting pid [%s]: %04x (%04d) at index %d\n", |
| __func__, adap->id, adap->active_fe, dvbdmxfeed->type, |
| adap->pid_filtering ? "yes" : "no", dvbdmxfeed->pid, |
| dvbdmxfeed->pid, dvbdmxfeed->index); |
| |
| /* wait init is done */ |
| wait_on_bit(&adap->state_bits, ADAP_INIT, TASK_UNINTERRUPTIBLE); |
| |
| if (adap->active_fe == -1) |
| return -EINVAL; |
| |
| /* skip feed setup if we are already feeding */ |
| if (adap->feed_count++ > 0) |
| goto skip_feed_start; |
| |
| /* set 'streaming' status bit */ |
| set_bit(ADAP_STREAMING, &adap->state_bits); |
| |
| /* resolve input and output streaming parameters */ |
| if (d->props->get_stream_config) { |
| memcpy(&stream_props, &adap->props->stream, |
| sizeof(struct usb_data_stream_properties)); |
| ret = d->props->get_stream_config(adap->fe[adap->active_fe], |
| &adap->ts_type, &stream_props); |
| if (ret) |
| dev_err(&d->udev->dev, |
| "%s: get_stream_config() failed=%d\n", |
| KBUILD_MODNAME, ret); |
| } else { |
| stream_props = adap->props->stream; |
| } |
| |
| switch (adap->ts_type) { |
| case DVB_USB_FE_TS_TYPE_204: |
| adap->stream.complete = dvb_usb_data_complete_204; |
| break; |
| case DVB_USB_FE_TS_TYPE_RAW: |
| adap->stream.complete = dvb_usb_data_complete_raw; |
| break; |
| case DVB_USB_FE_TS_TYPE_188: |
| default: |
| adap->stream.complete = dvb_usb_data_complete; |
| break; |
| } |
| |
| /* submit USB streaming packets */ |
| usb_urb_submitv2(&adap->stream, &stream_props); |
| |
| /* enable HW PID filter */ |
| if (adap->pid_filtering && adap->props->pid_filter_ctrl) { |
| ret = adap->props->pid_filter_ctrl(adap, 1); |
| if (ret) |
| dev_err(&d->udev->dev, |
| "%s: pid_filter_ctrl() failed=%d\n", |
| KBUILD_MODNAME, ret); |
| } |
| |
| /* ask device to start streaming */ |
| if (d->props->streaming_ctrl) { |
| ret = d->props->streaming_ctrl(adap->fe[adap->active_fe], 1); |
| if (ret) |
| dev_err(&d->udev->dev, |
| "%s: streaming_ctrl() failed=%d\n", |
| KBUILD_MODNAME, ret); |
| } |
| skip_feed_start: |
| |
| /* add PID to device HW PID filter */ |
| if (adap->pid_filtering && adap->props->pid_filter) { |
| ret = adap->props->pid_filter(adap, dvbdmxfeed->index, |
| dvbdmxfeed->pid, 1); |
| if (ret) |
| dev_err(&d->udev->dev, "%s: pid_filter() failed=%d\n", |
| KBUILD_MODNAME, ret); |
| } |
| |
| if (ret) |
| dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int dvb_usb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) |
| { |
| struct dvb_usb_adapter *adap = dvbdmxfeed->demux->priv; |
| struct dvb_usb_device *d = adap_to_d(adap); |
| int ret = 0; |
| dev_dbg(&d->udev->dev, |
| "%s: adap=%d active_fe=%d feed_type=%d setting pid [%s]: %04x (%04d) at index %d\n", |
| __func__, adap->id, adap->active_fe, dvbdmxfeed->type, |
| adap->pid_filtering ? "yes" : "no", dvbdmxfeed->pid, |
| dvbdmxfeed->pid, dvbdmxfeed->index); |
| |
| if (adap->active_fe == -1) |
| return -EINVAL; |
| |
| /* remove PID from device HW PID filter */ |
| if (adap->pid_filtering && adap->props->pid_filter) { |
| ret = adap->props->pid_filter(adap, dvbdmxfeed->index, |
| dvbdmxfeed->pid, 0); |
| if (ret) |
| dev_err(&d->udev->dev, "%s: pid_filter() failed=%d\n", |
| KBUILD_MODNAME, ret); |
| } |
| |
| /* we cannot stop streaming until last PID is removed */ |
| if (--adap->feed_count > 0) |
| goto skip_feed_stop; |
| |
| /* ask device to stop streaming */ |
| if (d->props->streaming_ctrl) { |
| ret = d->props->streaming_ctrl(adap->fe[adap->active_fe], 0); |
| if (ret) |
| dev_err(&d->udev->dev, |
| "%s: streaming_ctrl() failed=%d\n", |
| KBUILD_MODNAME, ret); |
| } |
| |
| /* disable HW PID filter */ |
| if (adap->pid_filtering && adap->props->pid_filter_ctrl) { |
| ret = adap->props->pid_filter_ctrl(adap, 0); |
| if (ret) |
| dev_err(&d->udev->dev, |
| "%s: pid_filter_ctrl() failed=%d\n", |
| KBUILD_MODNAME, ret); |
| } |
| |
| /* kill USB streaming packets */ |
| usb_urb_killv2(&adap->stream); |
| |
| /* clear 'streaming' status bit */ |
| clear_bit(ADAP_STREAMING, &adap->state_bits); |
| smp_mb__after_atomic(); |
| wake_up_bit(&adap->state_bits, ADAP_STREAMING); |
| skip_feed_stop: |
| |
| if (ret) |
| dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int dvb_usbv2_adapter_dvb_init(struct dvb_usb_adapter *adap) |
| { |
| int ret; |
| struct dvb_usb_device *d = adap_to_d(adap); |
| dev_dbg(&d->udev->dev, "%s: adap=%d\n", __func__, adap->id); |
| |
| ret = dvb_register_adapter(&adap->dvb_adap, d->name, d->props->owner, |
| &d->udev->dev, d->props->adapter_nr); |
| if (ret < 0) { |
| dev_dbg(&d->udev->dev, "%s: dvb_register_adapter() failed=%d\n", |
| __func__, ret); |
| goto err_dvb_register_adapter; |
| } |
| |
| adap->dvb_adap.priv = adap; |
| |
| if (d->props->read_mac_address) { |
| ret = d->props->read_mac_address(adap, |
| adap->dvb_adap.proposed_mac); |
| if (ret < 0) |
| goto err_dvb_dmx_init; |
| |
| dev_info(&d->udev->dev, "%s: MAC address: %pM\n", |
| KBUILD_MODNAME, adap->dvb_adap.proposed_mac); |
| } |
| |
| adap->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING; |
| adap->demux.priv = adap; |
| adap->demux.filternum = 0; |
| adap->demux.filternum = adap->max_feed_count; |
| adap->demux.feednum = adap->demux.filternum; |
| adap->demux.start_feed = dvb_usb_start_feed; |
| adap->demux.stop_feed = dvb_usb_stop_feed; |
| adap->demux.write_to_decoder = NULL; |
| ret = dvb_dmx_init(&adap->demux); |
| if (ret < 0) { |
| dev_err(&d->udev->dev, "%s: dvb_dmx_init() failed=%d\n", |
| KBUILD_MODNAME, ret); |
| goto err_dvb_dmx_init; |
| } |
| |
| adap->dmxdev.filternum = adap->demux.filternum; |
| adap->dmxdev.demux = &adap->demux.dmx; |
| adap->dmxdev.capabilities = 0; |
| ret = dvb_dmxdev_init(&adap->dmxdev, &adap->dvb_adap); |
| if (ret < 0) { |
| dev_err(&d->udev->dev, "%s: dvb_dmxdev_init() failed=%d\n", |
| KBUILD_MODNAME, ret); |
| goto err_dvb_dmxdev_init; |
| } |
| |
| ret = dvb_net_init(&adap->dvb_adap, &adap->dvb_net, &adap->demux.dmx); |
| if (ret < 0) { |
| dev_err(&d->udev->dev, "%s: dvb_net_init() failed=%d\n", |
| KBUILD_MODNAME, ret); |
| goto err_dvb_net_init; |
| } |
| |
| return 0; |
| err_dvb_net_init: |
| dvb_dmxdev_release(&adap->dmxdev); |
| err_dvb_dmxdev_init: |
| dvb_dmx_release(&adap->demux); |
| err_dvb_dmx_init: |
| dvb_unregister_adapter(&adap->dvb_adap); |
| err_dvb_register_adapter: |
| adap->dvb_adap.priv = NULL; |
| return ret; |
| } |
| |
| static int dvb_usbv2_adapter_dvb_exit(struct dvb_usb_adapter *adap) |
| { |
| dev_dbg(&adap_to_d(adap)->udev->dev, "%s: adap=%d\n", __func__, |
| adap->id); |
| |
| if (adap->dvb_adap.priv) { |
| dvb_net_release(&adap->dvb_net); |
| adap->demux.dmx.close(&adap->demux.dmx); |
| dvb_dmxdev_release(&adap->dmxdev); |
| dvb_dmx_release(&adap->demux); |
| dvb_unregister_adapter(&adap->dvb_adap); |
| } |
| |
| return 0; |
| } |
| |
| static int dvb_usbv2_device_power_ctrl(struct dvb_usb_device *d, int onoff) |
| { |
| int ret; |
| |
| if (onoff) |
| d->powered++; |
| else |
| d->powered--; |
| |
| if (d->powered == 0 || (onoff && d->powered == 1)) { |
| /* when switching from 1 to 0 or from 0 to 1 */ |
| dev_dbg(&d->udev->dev, "%s: power=%d\n", __func__, onoff); |
| if (d->props->power_ctrl) { |
| ret = d->props->power_ctrl(d, onoff); |
| if (ret < 0) |
| goto err; |
| } |
| } |
| |
| return 0; |
| err: |
| dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int dvb_usb_fe_init(struct dvb_frontend *fe) |
| { |
| int ret; |
| struct dvb_usb_adapter *adap = fe->dvb->priv; |
| struct dvb_usb_device *d = adap_to_d(adap); |
| dev_dbg(&d->udev->dev, "%s: adap=%d fe=%d\n", __func__, adap->id, |
| fe->id); |
| |
| if (!adap->suspend_resume_active) { |
| adap->active_fe = fe->id; |
| set_bit(ADAP_INIT, &adap->state_bits); |
| } |
| |
| ret = dvb_usbv2_device_power_ctrl(d, 1); |
| if (ret < 0) |
| goto err; |
| |
| if (d->props->frontend_ctrl) { |
| ret = d->props->frontend_ctrl(fe, 1); |
| if (ret < 0) |
| goto err; |
| } |
| |
| if (adap->fe_init[fe->id]) { |
| ret = adap->fe_init[fe->id](fe); |
| if (ret < 0) |
| goto err; |
| } |
| err: |
| if (!adap->suspend_resume_active) { |
| clear_bit(ADAP_INIT, &adap->state_bits); |
| smp_mb__after_atomic(); |
| wake_up_bit(&adap->state_bits, ADAP_INIT); |
| } |
| |
| dev_dbg(&d->udev->dev, "%s: ret=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int dvb_usb_fe_sleep(struct dvb_frontend *fe) |
| { |
| int ret; |
| struct dvb_usb_adapter *adap = fe->dvb->priv; |
| struct dvb_usb_device *d = adap_to_d(adap); |
| dev_dbg(&d->udev->dev, "%s: adap=%d fe=%d\n", __func__, adap->id, |
| fe->id); |
| |
| if (!adap->suspend_resume_active) { |
| set_bit(ADAP_SLEEP, &adap->state_bits); |
| wait_on_bit(&adap->state_bits, ADAP_STREAMING, |
| TASK_UNINTERRUPTIBLE); |
| } |
| |
| if (adap->fe_sleep[fe->id]) { |
| ret = adap->fe_sleep[fe->id](fe); |
| if (ret < 0) |
| goto err; |
| } |
| |
| if (d->props->frontend_ctrl) { |
| ret = d->props->frontend_ctrl(fe, 0); |
| if (ret < 0) |
| goto err; |
| } |
| |
| ret = dvb_usbv2_device_power_ctrl(d, 0); |
| if (ret < 0) |
| goto err; |
| err: |
| if (!adap->suspend_resume_active) { |
| adap->active_fe = -1; |
| clear_bit(ADAP_SLEEP, &adap->state_bits); |
| smp_mb__after_atomic(); |
| wake_up_bit(&adap->state_bits, ADAP_SLEEP); |
| } |
| |
| dev_dbg(&d->udev->dev, "%s: ret=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int dvb_usbv2_adapter_frontend_init(struct dvb_usb_adapter *adap) |
| { |
| int ret, i, count_registered = 0; |
| struct dvb_usb_device *d = adap_to_d(adap); |
| dev_dbg(&d->udev->dev, "%s: adap=%d\n", __func__, adap->id); |
| |
| memset(adap->fe, 0, sizeof(adap->fe)); |
| adap->active_fe = -1; |
| |
| if (d->props->frontend_attach) { |
| ret = d->props->frontend_attach(adap); |
| if (ret < 0) { |
| dev_dbg(&d->udev->dev, |
| "%s: frontend_attach() failed=%d\n", |
| __func__, ret); |
| goto err_dvb_frontend_detach; |
| } |
| } else { |
| dev_dbg(&d->udev->dev, "%s: frontend_attach() do not exists\n", |
| __func__); |
| ret = 0; |
| goto err; |
| } |
| |
| for (i = 0; i < MAX_NO_OF_FE_PER_ADAP && adap->fe[i]; i++) { |
| adap->fe[i]->id = i; |
| /* re-assign sleep and wakeup functions */ |
| adap->fe_init[i] = adap->fe[i]->ops.init; |
| adap->fe[i]->ops.init = dvb_usb_fe_init; |
| adap->fe_sleep[i] = adap->fe[i]->ops.sleep; |
| adap->fe[i]->ops.sleep = dvb_usb_fe_sleep; |
| |
| ret = dvb_register_frontend(&adap->dvb_adap, adap->fe[i]); |
| if (ret < 0) { |
| dev_err(&d->udev->dev, |
| "%s: frontend%d registration failed\n", |
| KBUILD_MODNAME, i); |
| goto err_dvb_unregister_frontend; |
| } |
| |
| count_registered++; |
| } |
| |
| if (d->props->tuner_attach) { |
| ret = d->props->tuner_attach(adap); |
| if (ret < 0) { |
| dev_dbg(&d->udev->dev, "%s: tuner_attach() failed=%d\n", |
| __func__, ret); |
| goto err_dvb_unregister_frontend; |
| } |
| } |
| |
| return 0; |
| |
| err_dvb_unregister_frontend: |
| for (i = count_registered - 1; i >= 0; i--) |
| dvb_unregister_frontend(adap->fe[i]); |
| |
| err_dvb_frontend_detach: |
| for (i = MAX_NO_OF_FE_PER_ADAP - 1; i >= 0; i--) { |
| if (adap->fe[i]) { |
| dvb_frontend_detach(adap->fe[i]); |
| adap->fe[i] = NULL; |
| } |
| } |
| |
| err: |
| dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int dvb_usbv2_adapter_frontend_exit(struct dvb_usb_adapter *adap) |
| { |
| int ret, i; |
| struct dvb_usb_device *d = adap_to_d(adap); |
| |
| dev_dbg(&d->udev->dev, "%s: adap=%d\n", __func__, adap->id); |
| |
| for (i = MAX_NO_OF_FE_PER_ADAP - 1; i >= 0; i--) { |
| if (adap->fe[i]) { |
| dvb_unregister_frontend(adap->fe[i]); |
| dvb_frontend_detach(adap->fe[i]); |
| } |
| } |
| |
| if (d->props->tuner_detach) { |
| ret = d->props->tuner_detach(adap); |
| if (ret < 0) { |
| dev_dbg(&d->udev->dev, "%s: tuner_detach() failed=%d\n", |
| __func__, ret); |
| } |
| } |
| |
| if (d->props->frontend_detach) { |
| ret = d->props->frontend_detach(adap); |
| if (ret < 0) { |
| dev_dbg(&d->udev->dev, |
| "%s: frontend_detach() failed=%d\n", |
| __func__, ret); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int dvb_usbv2_adapter_init(struct dvb_usb_device *d) |
| { |
| struct dvb_usb_adapter *adap; |
| int ret, i, adapter_count; |
| |
| /* resolve adapter count */ |
| adapter_count = d->props->num_adapters; |
| if (d->props->get_adapter_count) { |
| ret = d->props->get_adapter_count(d); |
| if (ret < 0) |
| goto err; |
| |
| adapter_count = ret; |
| } |
| |
| for (i = 0; i < adapter_count; i++) { |
| adap = &d->adapter[i]; |
| adap->id = i; |
| adap->props = &d->props->adapter[i]; |
| |
| /* speed - when running at FULL speed we need a HW PID filter */ |
| if (d->udev->speed == USB_SPEED_FULL && |
| !(adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER)) { |
| dev_err(&d->udev->dev, |
| "%s: this USB2.0 device cannot be run on a USB1.1 port (it lacks a hardware PID filter)\n", |
| KBUILD_MODNAME); |
| ret = -ENODEV; |
| goto err; |
| } else if ((d->udev->speed == USB_SPEED_FULL && |
| adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER) || |
| (adap->props->caps & DVB_USB_ADAP_NEED_PID_FILTERING)) { |
| dev_info(&d->udev->dev, |
| "%s: will use the device's hardware PID filter (table count: %d)\n", |
| KBUILD_MODNAME, |
| adap->props->pid_filter_count); |
| adap->pid_filtering = 1; |
| adap->max_feed_count = adap->props->pid_filter_count; |
| } else { |
| dev_info(&d->udev->dev, |
| "%s: will pass the complete MPEG2 transport stream to the software demuxer\n", |
| KBUILD_MODNAME); |
| adap->pid_filtering = 0; |
| adap->max_feed_count = 255; |
| } |
| |
| if (!adap->pid_filtering && dvb_usb_force_pid_filter_usage && |
| adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER) { |
| dev_info(&d->udev->dev, |
| "%s: PID filter enabled by module option\n", |
| KBUILD_MODNAME); |
| adap->pid_filtering = 1; |
| adap->max_feed_count = adap->props->pid_filter_count; |
| } |
| |
| ret = dvb_usbv2_adapter_stream_init(adap); |
| if (ret) |
| goto err; |
| |
| ret = dvb_usbv2_adapter_dvb_init(adap); |
| if (ret) |
| goto err; |
| |
| ret = dvb_usbv2_adapter_frontend_init(adap); |
| if (ret) |
| goto err; |
| |
| /* use exclusive FE lock if there is multiple shared FEs */ |
| if (adap->fe[1]) |
| adap->dvb_adap.mfe_shared = 1; |
| } |
| |
| return 0; |
| err: |
| dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int dvb_usbv2_adapter_exit(struct dvb_usb_device *d) |
| { |
| int i; |
| dev_dbg(&d->udev->dev, "%s:\n", __func__); |
| |
| for (i = MAX_NO_OF_ADAPTER_PER_DEVICE - 1; i >= 0; i--) { |
| if (d->adapter[i].props) { |
| dvb_usbv2_adapter_dvb_exit(&d->adapter[i]); |
| dvb_usbv2_adapter_stream_exit(&d->adapter[i]); |
| dvb_usbv2_adapter_frontend_exit(&d->adapter[i]); |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* general initialization functions */ |
| static int dvb_usbv2_exit(struct dvb_usb_device *d) |
| { |
| dev_dbg(&d->udev->dev, "%s:\n", __func__); |
| |
| dvb_usbv2_remote_exit(d); |
| dvb_usbv2_adapter_exit(d); |
| dvb_usbv2_i2c_exit(d); |
| kfree(d->priv); |
| kfree(d); |
| |
| return 0; |
| } |
| |
| static int dvb_usbv2_init(struct dvb_usb_device *d) |
| { |
| int ret; |
| dev_dbg(&d->udev->dev, "%s:\n", __func__); |
| |
| dvb_usbv2_device_power_ctrl(d, 1); |
| |
| if (d->props->read_config) { |
| ret = d->props->read_config(d); |
| if (ret < 0) |
| goto err; |
| } |
| |
| ret = dvb_usbv2_i2c_init(d); |
| if (ret < 0) |
| goto err; |
| |
| ret = dvb_usbv2_adapter_init(d); |
| if (ret < 0) |
| goto err; |
| |
| if (d->props->init) { |
| ret = d->props->init(d); |
| if (ret < 0) |
| goto err; |
| } |
| |
| ret = dvb_usbv2_remote_init(d); |
| if (ret < 0) |
| goto err; |
| |
| dvb_usbv2_device_power_ctrl(d, 0); |
| |
| return 0; |
| err: |
| dvb_usbv2_device_power_ctrl(d, 0); |
| dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| int dvb_usbv2_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| int ret; |
| struct dvb_usb_device *d; |
| struct usb_device *udev = interface_to_usbdev(intf); |
| struct dvb_usb_driver_info *driver_info = |
| (struct dvb_usb_driver_info *) id->driver_info; |
| |
| dev_dbg(&udev->dev, "%s: bInterfaceNumber=%d\n", __func__, |
| intf->cur_altsetting->desc.bInterfaceNumber); |
| |
| if (!id->driver_info) { |
| dev_err(&udev->dev, "%s: driver_info failed\n", KBUILD_MODNAME); |
| ret = -ENODEV; |
| goto err; |
| } |
| |
| d = kzalloc(sizeof(struct dvb_usb_device), GFP_KERNEL); |
| if (!d) { |
| dev_err(&udev->dev, "%s: kzalloc() failed\n", KBUILD_MODNAME); |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| d->intf = intf; |
| d->name = driver_info->name; |
| d->rc_map = driver_info->rc_map; |
| d->udev = udev; |
| d->props = driver_info->props; |
| |
| if (intf->cur_altsetting->desc.bInterfaceNumber != |
| d->props->bInterfaceNumber) { |
| ret = -ENODEV; |
| goto err_free_all; |
| } |
| |
| mutex_init(&d->usb_mutex); |
| mutex_init(&d->i2c_mutex); |
| |
| if (d->props->size_of_priv) { |
| d->priv = kzalloc(d->props->size_of_priv, GFP_KERNEL); |
| if (!d->priv) { |
| dev_err(&d->udev->dev, "%s: kzalloc() failed\n", |
| KBUILD_MODNAME); |
| ret = -ENOMEM; |
| goto err_free_all; |
| } |
| } |
| |
| if (d->props->identify_state) { |
| const char *name = NULL; |
| ret = d->props->identify_state(d, &name); |
| if (ret == 0) { |
| ; |
| } else if (ret == COLD) { |
| dev_info(&d->udev->dev, |
| "%s: found a '%s' in cold state\n", |
| KBUILD_MODNAME, d->name); |
| |
| if (!name) |
| name = d->props->firmware; |
| |
| ret = dvb_usbv2_download_firmware(d, name); |
| if (ret == 0) { |
| /* device is warm, continue initialization */ |
| ; |
| } else if (ret == RECONNECTS_USB) { |
| /* |
| * USB core will call disconnect() and then |
| * probe() as device reconnects itself from the |
| * USB bus. disconnect() will release all driver |
| * resources and probe() is called for 'new' |
| * device. As 'new' device is warm we should |
| * never go here again. |
| */ |
| goto exit; |
| } else { |
| goto err_free_all; |
| } |
| } else { |
| goto err_free_all; |
| } |
| } |
| |
| dev_info(&d->udev->dev, "%s: found a '%s' in warm state\n", |
| KBUILD_MODNAME, d->name); |
| |
| ret = dvb_usbv2_init(d); |
| if (ret < 0) |
| goto err_free_all; |
| |
| dev_info(&d->udev->dev, |
| "%s: '%s' successfully initialized and connected\n", |
| KBUILD_MODNAME, d->name); |
| exit: |
| usb_set_intfdata(intf, d); |
| |
| return 0; |
| err_free_all: |
| dvb_usbv2_exit(d); |
| err: |
| dev_dbg(&udev->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| EXPORT_SYMBOL(dvb_usbv2_probe); |
| |
| void dvb_usbv2_disconnect(struct usb_interface *intf) |
| { |
| struct dvb_usb_device *d = usb_get_intfdata(intf); |
| const char *name = d->name; |
| struct device dev = d->udev->dev; |
| dev_dbg(&d->udev->dev, "%s: bInterfaceNumber=%d\n", __func__, |
| intf->cur_altsetting->desc.bInterfaceNumber); |
| |
| if (d->props->exit) |
| d->props->exit(d); |
| |
| dvb_usbv2_exit(d); |
| |
| dev_info(&dev, "%s: '%s' successfully deinitialized and disconnected\n", |
| KBUILD_MODNAME, name); |
| } |
| EXPORT_SYMBOL(dvb_usbv2_disconnect); |
| |
| int dvb_usbv2_suspend(struct usb_interface *intf, pm_message_t msg) |
| { |
| struct dvb_usb_device *d = usb_get_intfdata(intf); |
| int ret = 0, i, active_fe; |
| struct dvb_frontend *fe; |
| dev_dbg(&d->udev->dev, "%s:\n", __func__); |
| |
| /* stop remote controller poll */ |
| if (d->rc_polling_active) |
| cancel_delayed_work_sync(&d->rc_query_work); |
| |
| for (i = MAX_NO_OF_ADAPTER_PER_DEVICE - 1; i >= 0; i--) { |
| active_fe = d->adapter[i].active_fe; |
| if (d->adapter[i].dvb_adap.priv && active_fe != -1) { |
| fe = d->adapter[i].fe[active_fe]; |
| d->adapter[i].suspend_resume_active = true; |
| |
| if (d->props->streaming_ctrl) |
| d->props->streaming_ctrl(fe, 0); |
| |
| /* stop usb streaming */ |
| usb_urb_killv2(&d->adapter[i].stream); |
| |
| ret = dvb_frontend_suspend(fe); |
| } |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(dvb_usbv2_suspend); |
| |
| static int dvb_usbv2_resume_common(struct dvb_usb_device *d) |
| { |
| int ret = 0, i, active_fe; |
| struct dvb_frontend *fe; |
| dev_dbg(&d->udev->dev, "%s:\n", __func__); |
| |
| for (i = 0; i < MAX_NO_OF_ADAPTER_PER_DEVICE; i++) { |
| active_fe = d->adapter[i].active_fe; |
| if (d->adapter[i].dvb_adap.priv && active_fe != -1) { |
| fe = d->adapter[i].fe[active_fe]; |
| |
| ret = dvb_frontend_resume(fe); |
| |
| /* resume usb streaming */ |
| usb_urb_submitv2(&d->adapter[i].stream, NULL); |
| |
| if (d->props->streaming_ctrl) |
| d->props->streaming_ctrl(fe, 1); |
| |
| d->adapter[i].suspend_resume_active = false; |
| } |
| } |
| |
| /* start remote controller poll */ |
| if (d->rc_polling_active) |
| schedule_delayed_work(&d->rc_query_work, |
| msecs_to_jiffies(d->rc.interval)); |
| |
| return ret; |
| } |
| |
| int dvb_usbv2_resume(struct usb_interface *intf) |
| { |
| struct dvb_usb_device *d = usb_get_intfdata(intf); |
| dev_dbg(&d->udev->dev, "%s:\n", __func__); |
| |
| return dvb_usbv2_resume_common(d); |
| } |
| EXPORT_SYMBOL(dvb_usbv2_resume); |
| |
| int dvb_usbv2_reset_resume(struct usb_interface *intf) |
| { |
| struct dvb_usb_device *d = usb_get_intfdata(intf); |
| int ret; |
| dev_dbg(&d->udev->dev, "%s:\n", __func__); |
| |
| dvb_usbv2_device_power_ctrl(d, 1); |
| |
| if (d->props->init) |
| d->props->init(d); |
| |
| ret = dvb_usbv2_resume_common(d); |
| |
| dvb_usbv2_device_power_ctrl(d, 0); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(dvb_usbv2_reset_resume); |
| |
| MODULE_VERSION("2.0"); |
| MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); |
| MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); |
| MODULE_DESCRIPTION("DVB USB common"); |
| MODULE_LICENSE("GPL"); |