| # SPDX-License-Identifier: GPL-2.0 |
| # |
| # Makefile for linux/drivers/scsi |
| # |
| # 30 May 2000, Christoph Hellwig <hch@infradead.org> |
| # Rewritten to use lists instead of if-statements. |
| # |
| # 20 Sep 2000, Torben Mathiasen <tmm@image.dk> |
| # Changed link order to reflect new scsi initialization. |
| # |
| # *!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*! |
| # The link order must be, SCSI Core, SCSI HBA drivers, and |
| # lastly SCSI peripheral drivers (disk/tape/cdrom/etc.) to |
| # satisfy certain initialization assumptions in the SCSI layer. |
| # *!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*! |
| |
| |
| CFLAGS_aha152x.o = -DAHA152X_STAT -DAUTOCONF |
| CFLAGS_gdth.o = # -DDEBUG_GDTH=2 -D__SERIAL__ -D__COM2__ -DGDTH_STATISTICS |
| |
| obj-$(CONFIG_PCMCIA) += pcmcia/ |
| |
| obj-$(CONFIG_SCSI) += scsi_mod.o |
| |
| obj-$(CONFIG_RAID_ATTRS) += raid_class.o |
| |
| # --- NOTE ORDERING HERE --- |
| # For kernel non-modular link, transport attributes need to |
| # be initialised before drivers |
| # -------------------------- |
| obj-$(CONFIG_SCSI_SPI_ATTRS) += scsi_transport_spi.o |
| obj-$(CONFIG_SCSI_FC_ATTRS) += scsi_transport_fc.o |
| obj-$(CONFIG_SCSI_ISCSI_ATTRS) += scsi_transport_iscsi.o |
| obj-$(CONFIG_SCSI_SAS_ATTRS) += scsi_transport_sas.o |
| obj-$(CONFIG_SCSI_SAS_LIBSAS) += libsas/ |
| obj-$(CONFIG_SCSI_SRP_ATTRS) += scsi_transport_srp.o |
| obj-$(CONFIG_SCSI_DH) += device_handler/ |
| |
| obj-$(CONFIG_LIBFC) += libfc/ |
| obj-$(CONFIG_LIBFCOE) += fcoe/ |
| obj-$(CONFIG_FCOE) += fcoe/ |
| obj-$(CONFIG_FCOE_FNIC) += fnic/ |
| obj-$(CONFIG_SCSI_SNIC) += snic/ |
| obj-$(CONFIG_SCSI_BNX2X_FCOE) += libfc/ fcoe/ bnx2fc/ |
| obj-$(CONFIG_QEDF) += qedf/ |
| obj-$(CONFIG_ISCSI_TCP) += libiscsi.o libiscsi_tcp.o iscsi_tcp.o |
| obj-$(CONFIG_INFINIBAND_ISER) += libiscsi.o |
| obj-$(CONFIG_ISCSI_BOOT_SYSFS) += iscsi_boot_sysfs.o |
| obj-$(CONFIG_SCSI_A4000T) += 53c700.o a4000t.o |
| obj-$(CONFIG_SCSI_ZORRO7XX) += 53c700.o zorro7xx.o |
| obj-$(CONFIG_A3000_SCSI) += a3000.o wd33c93.o |
| obj-$(CONFIG_A2091_SCSI) += a2091.o wd33c93.o |
| obj-$(CONFIG_GVP11_SCSI) += gvp11.o wd33c93.o |
| obj-$(CONFIG_MVME147_SCSI) += mvme147.o wd33c93.o |
| obj-$(CONFIG_SGIWD93_SCSI) += sgiwd93.o wd33c93.o |
| obj-$(CONFIG_ATARI_SCSI) += atari_scsi.o |
| obj-$(CONFIG_MAC_SCSI) += mac_scsi.o |
| obj-$(CONFIG_SCSI_MAC_ESP) += esp_scsi.o mac_esp.o |
| obj-$(CONFIG_SUN3_SCSI) += sun3_scsi.o sun3_scsi_vme.o |
| obj-$(CONFIG_MVME16x_SCSI) += 53c700.o mvme16x_scsi.o |
| obj-$(CONFIG_BVME6000_SCSI) += 53c700.o bvme6000_scsi.o |
| obj-$(CONFIG_SCSI_SIM710) += 53c700.o sim710.o |
| obj-$(CONFIG_SCSI_ADVANSYS) += advansys.o |
| obj-$(CONFIG_SCSI_BUSLOGIC) += BusLogic.o |
| obj-$(CONFIG_SCSI_DPT_I2O) += dpt_i2o.o |
| obj-$(CONFIG_SCSI_ARCMSR) += arcmsr/ |
| obj-$(CONFIG_SCSI_AHA152X) += aha152x.o |
| obj-$(CONFIG_SCSI_AHA1542) += aha1542.o |
| obj-$(CONFIG_SCSI_AHA1740) += aha1740.o |
| obj-$(CONFIG_SCSI_AIC7XXX) += aic7xxx/ |
| obj-$(CONFIG_SCSI_AIC79XX) += aic7xxx/ |
| obj-$(CONFIG_SCSI_AACRAID) += aacraid/ |
| obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/ |
| obj-$(CONFIG_SCSI_PM8001) += pm8001/ |
| obj-$(CONFIG_SCSI_ISCI) += isci/ |
| obj-$(CONFIG_SCSI_IPS) += ips.o |
| obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o |
| obj-$(CONFIG_SCSI_NCR_D700) += 53c700.o NCR_D700.o |
| obj-$(CONFIG_SCSI_NCR_Q720) += NCR_Q720_mod.o |
| obj-$(CONFIG_SCSI_QLOGIC_FAS) += qlogicfas408.o qlogicfas.o |
| obj-$(CONFIG_PCMCIA_QLOGIC) += qlogicfas408.o |
| obj-$(CONFIG_SCSI_QLOGIC_1280) += qla1280.o |
| obj-$(CONFIG_SCSI_QLA_FC) += qla2xxx/ |
| obj-$(CONFIG_SCSI_QLA_ISCSI) += libiscsi.o qla4xxx/ |
| obj-$(CONFIG_SCSI_LPFC) += lpfc/ |
| obj-$(CONFIG_SCSI_BFA_FC) += bfa/ |
| obj-$(CONFIG_SCSI_CHELSIO_FCOE) += csiostor/ |
| obj-$(CONFIG_SCSI_DMX3191D) += dmx3191d.o |
| obj-$(CONFIG_SCSI_HPSA) += hpsa.o |
| obj-$(CONFIG_SCSI_SMARTPQI) += smartpqi/ |
| obj-$(CONFIG_SCSI_SYM53C8XX_2) += sym53c8xx_2/ |
| obj-$(CONFIG_SCSI_ZALON) += zalon7xx.o |
| obj-$(CONFIG_SCSI_DC395x) += dc395x.o |
| obj-$(CONFIG_SCSI_AM53C974) += esp_scsi.o am53c974.o |
| obj-$(CONFIG_CXLFLASH) += cxlflash/ |
| obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o |
| obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/ |
| obj-$(CONFIG_MEGARAID_SAS) += megaraid/ |
| obj-$(CONFIG_SCSI_MPT3SAS) += mpt3sas/ |
| obj-$(CONFIG_SCSI_UFSHCD) += ufs/ |
| obj-$(CONFIG_SCSI_ACARD) += atp870u.o |
| obj-$(CONFIG_SCSI_SUNESP) += esp_scsi.o sun_esp.o |
| obj-$(CONFIG_SCSI_GDTH) += gdth.o |
| obj-$(CONFIG_SCSI_INITIO) += initio.o |
| obj-$(CONFIG_SCSI_INIA100) += a100u2w.o |
| obj-$(CONFIG_SCSI_QLOGICPTI) += qlogicpti.o |
| obj-$(CONFIG_SCSI_MESH) += mesh.o |
| obj-$(CONFIG_SCSI_MAC53C94) += mac53c94.o |
| obj-$(CONFIG_BLK_DEV_3W_XXXX_RAID) += 3w-xxxx.o |
| obj-$(CONFIG_SCSI_3W_9XXX) += 3w-9xxx.o |
| obj-$(CONFIG_SCSI_3W_SAS) += 3w-sas.o |
| obj-$(CONFIG_SCSI_PPA) += ppa.o |
| obj-$(CONFIG_SCSI_IMM) += imm.o |
| obj-$(CONFIG_JAZZ_ESP) += esp_scsi.o jazz_esp.o |
| obj-$(CONFIG_SUN3X_ESP) += esp_scsi.o sun3x_esp.o |
| obj-$(CONFIG_SCSI_LASI700) += 53c700.o lasi700.o |
| obj-$(CONFIG_SCSI_SNI_53C710) += 53c700.o sni_53c710.o |
| obj-$(CONFIG_SCSI_NSP32) += nsp32.o |
| obj-$(CONFIG_SCSI_IPR) += ipr.o |
| obj-$(CONFIG_SCSI_IBMVSCSI) += ibmvscsi/ |
| obj-$(CONFIG_SCSI_IBMVSCSIS) += ibmvscsi_tgt/ |
| obj-$(CONFIG_SCSI_IBMVFC) += ibmvscsi/ |
| obj-$(CONFIG_SCSI_HPTIOP) += hptiop.o |
| obj-$(CONFIG_SCSI_STEX) += stex.o |
| obj-$(CONFIG_SCSI_MVSAS) += mvsas/ |
| obj-$(CONFIG_SCSI_MVUMI) += mvumi.o |
| obj-$(CONFIG_PS3_ROM) += ps3rom.o |
| obj-$(CONFIG_SCSI_CXGB3_ISCSI) += libiscsi.o libiscsi_tcp.o cxgbi/ |
| obj-$(CONFIG_SCSI_CXGB4_ISCSI) += libiscsi.o libiscsi_tcp.o cxgbi/ |
| obj-$(CONFIG_SCSI_BNX2_ISCSI) += libiscsi.o bnx2i/ |
| obj-$(CONFIG_QEDI) += libiscsi.o qedi/ |
| obj-$(CONFIG_BE2ISCSI) += libiscsi.o be2iscsi/ |
| obj-$(CONFIG_SCSI_ESAS2R) += esas2r/ |
| obj-$(CONFIG_SCSI_PMCRAID) += pmcraid.o |
| obj-$(CONFIG_SCSI_VIRTIO) += virtio_scsi.o |
| obj-$(CONFIG_VMWARE_PVSCSI) += vmw_pvscsi.o |
| obj-$(CONFIG_XEN_SCSI_FRONTEND) += xen-scsifront.o |
| obj-$(CONFIG_HYPERV_STORAGE) += hv_storvsc.o |
| obj-$(CONFIG_SCSI_WD719X) += wd719x.o |
| |
| obj-$(CONFIG_ARM) += arm/ |
| |
| obj-$(CONFIG_CHR_DEV_ST) += st.o |
| obj-$(CONFIG_CHR_DEV_OSST) += osst.o |
| obj-$(CONFIG_BLK_DEV_SD) += sd_mod.o |
| obj-$(CONFIG_BLK_DEV_SR) += sr_mod.o |
| obj-$(CONFIG_CHR_DEV_SG) += sg.o |
| obj-$(CONFIG_CHR_DEV_SCH) += ch.o |
| obj-$(CONFIG_SCSI_ENCLOSURE) += ses.o |
| |
| obj-$(CONFIG_SCSI_OSD_INITIATOR) += osd/ |
| obj-$(CONFIG_SCSI_HISI_SAS) += hisi_sas/ |
| |
| # This goes last, so that "real" scsi devices probe earlier |
| obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o |
| scsi_mod-y += scsi.o hosts.o scsi_ioctl.o \ |
| scsicam.o scsi_error.o scsi_lib.o |
| scsi_mod-y += scsi_common.o |
| scsi_mod-$(CONFIG_SCSI_CONSTANTS) += constants.o |
| scsi_mod-$(CONFIG_SCSI_DMA) += scsi_lib_dma.o |
| scsi_mod-y += scsi_scan.o scsi_sysfs.o scsi_devinfo.o |
| scsi_mod-$(CONFIG_SCSI_NETLINK) += scsi_netlink.o |
| scsi_mod-$(CONFIG_SYSCTL) += scsi_sysctl.o |
| scsi_mod-$(CONFIG_SCSI_PROC_FS) += scsi_proc.o |
| scsi_mod-$(CONFIG_BLK_DEBUG_FS) += scsi_debugfs.o |
| scsi_mod-y += scsi_trace.o scsi_logging.o |
| scsi_mod-$(CONFIG_PM) += scsi_pm.o |
| scsi_mod-$(CONFIG_SCSI_DH) += scsi_dh.o |
| |
| hv_storvsc-y := storvsc_drv.o |
| |
| sd_mod-objs := sd.o |
| sd_mod-$(CONFIG_BLK_DEV_INTEGRITY) += sd_dif.o |
| sd_mod-$(CONFIG_BLK_DEV_ZONED) += sd_zbc.o |
| |
| sr_mod-objs := sr.o sr_ioctl.o sr_vendor.o |
| ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \ |
| := -DCONFIG_NCR53C8XX_PREFETCH -DSCSI_NCR_BIG_ENDIAN \ |
| -DCONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS |
| CFLAGS_ncr53c8xx.o := $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m) |
| zalon7xx-objs := zalon.o ncr53c8xx.o |
| NCR_Q720_mod-objs := NCR_Q720.o ncr53c8xx.o |
| |
| # Files generated that shall be removed upon make clean |
| clean-files := 53c700_d.h 53c700_u.h scsi_devinfo_tbl.c |
| |
| $(obj)/53c700.o $(MODVERDIR)/$(obj)/53c700.ver: $(obj)/53c700_d.h |
| |
| $(obj)/scsi_sysfs.o: $(obj)/scsi_devinfo_tbl.c |
| |
| quiet_cmd_bflags = GEN $@ |
| cmd_bflags = sed -n 's/.*BLIST_\([A-Z0-9_]*\) *.*/BLIST_FLAG_NAME(\1),/p' $< > $@ |
| |
| $(obj)/scsi_devinfo_tbl.c: include/scsi/scsi_devinfo.h |
| $(call if_changed,bflags) |
| |
| # If you want to play with the firmware, uncomment |
| # GENERATE_FIRMWARE := 1 |
| |
| ifdef GENERATE_FIRMWARE |
| |
| $(obj)/53c700_d.h: $(src)/53c700.scr $(src)/script_asm.pl |
| $(PERL) -s $(src)/script_asm.pl -ncr7x0_family $@ $(@:_d.h=_u.h) < $< |
| |
| endif |