| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * This file is part of UBIFS. |
| * |
| * Copyright (C) 2006-2008 Nokia Corporation. |
| * |
| * Authors: Adrian Hunter |
| * Artem Bityutskiy (Битюцкий Артём) |
| */ |
| |
| /* |
| * This file implements the budgeting sub-system which is responsible for UBIFS |
| * space management. |
| * |
| * Factors such as compression, wasted space at the ends of LEBs, space in other |
| * journal heads, the effect of updates on the index, and so on, make it |
| * impossible to accurately predict the amount of space needed. Consequently |
| * approximations are used. |
| */ |
| |
| #include "ubifs.h" |
| #include <linux/writeback.h> |
| #include <linux/math64.h> |
| |
| /* |
| * When pessimistic budget calculations say that there is no enough space, |
| * UBIFS starts writing back dirty inodes and pages, doing garbage collection, |
| * or committing. The below constant defines maximum number of times UBIFS |
| * repeats the operations. |
| */ |
| #define MAX_MKSPC_RETRIES 3 |
| |
| /* |
| * The below constant defines amount of dirty pages which should be written |
| * back at when trying to shrink the liability. |
| */ |
| #define NR_TO_WRITE 16 |
| |
| /** |
| * shrink_liability - write-back some dirty pages/inodes. |
| * @c: UBIFS file-system description object |
| * @nr_to_write: how many dirty pages to write-back |
| * |
| * This function shrinks UBIFS liability by means of writing back some amount |
| * of dirty inodes and their pages. |
| * |
| * Note, this function synchronizes even VFS inodes which are locked |
| * (@i_mutex) by the caller of the budgeting function, because write-back does |
| * not touch @i_mutex. |
| */ |
| static void shrink_liability(struct ubifs_info *c, int nr_to_write) |
| { |
| down_read(&c->vfs_sb->s_umount); |
| writeback_inodes_sb(c->vfs_sb, WB_REASON_FS_FREE_SPACE); |
| up_read(&c->vfs_sb->s_umount); |
| } |
| |
| /** |
| * run_gc - run garbage collector. |
| * @c: UBIFS file-system description object |
| * |
| * This function runs garbage collector to make some more free space. Returns |
| * zero if a free LEB has been produced, %-EAGAIN if commit is required, and a |
| * negative error code in case of failure. |
| */ |
| static int run_gc(struct ubifs_info *c) |
| { |
| int err, lnum; |
| |
| /* Make some free space by garbage-collecting dirty space */ |
| down_read(&c->commit_sem); |
| lnum = ubifs_garbage_collect(c, 1); |
| up_read(&c->commit_sem); |
| if (lnum < 0) |
| return lnum; |
| |
| /* GC freed one LEB, return it to lprops */ |
| dbg_budg("GC freed LEB %d", lnum); |
| err = ubifs_return_leb(c, lnum); |
| if (err) |
| return err; |
| return 0; |
| } |
| |
| /** |
| * get_liability - calculate current liability. |
| * @c: UBIFS file-system description object |
| * |
| * This function calculates and returns current UBIFS liability, i.e. the |
| * amount of bytes UBIFS has "promised" to write to the media. |
| */ |
| static long long get_liability(struct ubifs_info *c) |
| { |
| long long liab; |
| |
| spin_lock(&c->space_lock); |
| liab = c->bi.idx_growth + c->bi.data_growth + c->bi.dd_growth; |
| spin_unlock(&c->space_lock); |
| return liab; |
| } |
| |
| /** |
| * make_free_space - make more free space on the file-system. |
| * @c: UBIFS file-system description object |
| * |
| * This function is called when an operation cannot be budgeted because there |
| * is supposedly no free space. But in most cases there is some free space: |
| * o budgeting is pessimistic, so it always budgets more than it is actually |
| * needed, so shrinking the liability is one way to make free space - the |
| * cached data will take less space then it was budgeted for; |
| * o GC may turn some dark space into free space (budgeting treats dark space |
| * as not available); |
| * o commit may free some LEB, i.e., turn freeable LEBs into free LEBs. |
| * |
| * So this function tries to do the above. Returns %-EAGAIN if some free space |
| * was presumably made and the caller has to re-try budgeting the operation. |
| * Returns %-ENOSPC if it couldn't do more free space, and other negative error |
| * codes on failures. |
| */ |
| static int make_free_space(struct ubifs_info *c) |
| { |
| int err, retries = 0; |
| long long liab1, liab2; |
| |
| do { |
| liab1 = get_liability(c); |
| /* |
| * We probably have some dirty pages or inodes (liability), try |
| * to write them back. |
| */ |
| dbg_budg("liability %lld, run write-back", liab1); |
| shrink_liability(c, NR_TO_WRITE); |
| |
| liab2 = get_liability(c); |
| if (liab2 < liab1) |
| return -EAGAIN; |
| |
| dbg_budg("new liability %lld (not shrunk)", liab2); |
| |
| /* Liability did not shrink again, try GC */ |
| dbg_budg("Run GC"); |
| err = run_gc(c); |
| if (!err) |
| return -EAGAIN; |
| |
| if (err != -EAGAIN && err != -ENOSPC) |
| /* Some real error happened */ |
| return err; |
| |
| dbg_budg("Run commit (retries %d)", retries); |
| err = ubifs_run_commit(c); |
| if (err) |
| return err; |
| } while (retries++ < MAX_MKSPC_RETRIES); |
| |
| return -ENOSPC; |
| } |
| |
| /** |
| * ubifs_calc_min_idx_lebs - calculate amount of LEBs for the index. |
| * @c: UBIFS file-system description object |
| * |
| * This function calculates and returns the number of LEBs which should be kept |
| * for index usage. |
| */ |
| int ubifs_calc_min_idx_lebs(struct ubifs_info *c) |
| { |
| int idx_lebs; |
| long long idx_size; |
| |
| idx_size = c->bi.old_idx_sz + c->bi.idx_growth + c->bi.uncommitted_idx; |
| /* And make sure we have thrice the index size of space reserved */ |
| idx_size += idx_size << 1; |
| /* |
| * We do not maintain 'old_idx_size' as 'old_idx_lebs'/'old_idx_bytes' |
| * pair, nor similarly the two variables for the new index size, so we |
| * have to do this costly 64-bit division on fast-path. |
| */ |
| idx_lebs = div_u64(idx_size + c->idx_leb_size - 1, c->idx_leb_size); |
| /* |
| * The index head is not available for the in-the-gaps method, so add an |
| * extra LEB to compensate. |
| */ |
| idx_lebs += 1; |
| if (idx_lebs < MIN_INDEX_LEBS) |
| idx_lebs = MIN_INDEX_LEBS; |
| return idx_lebs; |
| } |
| |
| /** |
| * ubifs_calc_available - calculate available FS space. |
| * @c: UBIFS file-system description object |
| * @min_idx_lebs: minimum number of LEBs reserved for the index |
| * |
| * This function calculates and returns amount of FS space available for use. |
| */ |
| long long ubifs_calc_available(const struct ubifs_info *c, int min_idx_lebs) |
| { |
| int subtract_lebs; |
| long long available; |
| |
| available = c->main_bytes - c->lst.total_used; |
| |
| /* |
| * Now 'available' contains theoretically available flash space |
| * assuming there is no index, so we have to subtract the space which |
| * is reserved for the index. |
| */ |
| subtract_lebs = min_idx_lebs; |
| |
| /* Take into account that GC reserves one LEB for its own needs */ |
| subtract_lebs += 1; |
| |
| /* |
| * The GC journal head LEB is not really accessible. And since |
| * different write types go to different heads, we may count only on |
| * one head's space. |
| */ |
| subtract_lebs += c->jhead_cnt - 1; |
| |
| /* We also reserve one LEB for deletions, which bypass budgeting */ |
| subtract_lebs += 1; |
| |
| available -= (long long)subtract_lebs * c->leb_size; |
| |
| /* Subtract the dead space which is not available for use */ |
| available -= c->lst.total_dead; |
| |
| /* |
| * Subtract dark space, which might or might not be usable - it depends |
| * on the data which we have on the media and which will be written. If |
| * this is a lot of uncompressed or not-compressible data, the dark |
| * space cannot be used. |
| */ |
| available -= c->lst.total_dark; |
| |
| /* |
| * However, there is more dark space. The index may be bigger than |
| * @min_idx_lebs. Those extra LEBs are assumed to be available, but |
| * their dark space is not included in total_dark, so it is subtracted |
| * here. |
| */ |
| if (c->lst.idx_lebs > min_idx_lebs) { |
| subtract_lebs = c->lst.idx_lebs - min_idx_lebs; |
| available -= subtract_lebs * c->dark_wm; |
| } |
| |
| /* The calculations are rough and may end up with a negative number */ |
| return available > 0 ? available : 0; |
| } |
| |
| /** |
| * can_use_rp - check whether the user is allowed to use reserved pool. |
| * @c: UBIFS file-system description object |
| * |
| * UBIFS has so-called "reserved pool" which is flash space reserved |
| * for the superuser and for uses whose UID/GID is recorded in UBIFS superblock. |
| * This function checks whether current user is allowed to use reserved pool. |
| * Returns %1 current user is allowed to use reserved pool and %0 otherwise. |
| */ |
| static int can_use_rp(struct ubifs_info *c) |
| { |
| if (uid_eq(current_fsuid(), c->rp_uid) || capable(CAP_SYS_RESOURCE) || |
| (!gid_eq(c->rp_gid, GLOBAL_ROOT_GID) && in_group_p(c->rp_gid))) |
| return 1; |
| return 0; |
| } |
| |
| /** |
| * do_budget_space - reserve flash space for index and data growth. |
| * @c: UBIFS file-system description object |
| * |
| * This function makes sure UBIFS has enough free LEBs for index growth and |
| * data. |
| * |
| * When budgeting index space, UBIFS reserves thrice as many LEBs as the index |
| * would take if it was consolidated and written to the flash. This guarantees |
| * that the "in-the-gaps" commit method always succeeds and UBIFS will always |
| * be able to commit dirty index. So this function basically adds amount of |
| * budgeted index space to the size of the current index, multiplies this by 3, |
| * and makes sure this does not exceed the amount of free LEBs. |
| * |
| * Notes about @c->bi.min_idx_lebs and @c->lst.idx_lebs variables: |
| * o @c->lst.idx_lebs is the number of LEBs the index currently uses. It might |
| * be large, because UBIFS does not do any index consolidation as long as |
| * there is free space. IOW, the index may take a lot of LEBs, but the LEBs |
| * will contain a lot of dirt. |
| * o @c->bi.min_idx_lebs is the number of LEBS the index presumably takes. IOW, |
| * the index may be consolidated to take up to @c->bi.min_idx_lebs LEBs. |
| * |
| * This function returns zero in case of success, and %-ENOSPC in case of |
| * failure. |
| */ |
| static int do_budget_space(struct ubifs_info *c) |
| { |
| long long outstanding, available; |
| int lebs, rsvd_idx_lebs, min_idx_lebs; |
| |
| /* First budget index space */ |
| min_idx_lebs = ubifs_calc_min_idx_lebs(c); |
| |
| /* Now 'min_idx_lebs' contains number of LEBs to reserve */ |
| if (min_idx_lebs > c->lst.idx_lebs) |
| rsvd_idx_lebs = min_idx_lebs - c->lst.idx_lebs; |
| else |
| rsvd_idx_lebs = 0; |
| |
| /* |
| * The number of LEBs that are available to be used by the index is: |
| * |
| * @c->lst.empty_lebs + @c->freeable_cnt + @c->idx_gc_cnt - |
| * @c->lst.taken_empty_lebs |
| * |
| * @c->lst.empty_lebs are available because they are empty. |
| * @c->freeable_cnt are available because they contain only free and |
| * dirty space, @c->idx_gc_cnt are available because they are index |
| * LEBs that have been garbage collected and are awaiting the commit |
| * before they can be used. And the in-the-gaps method will grab these |
| * if it needs them. @c->lst.taken_empty_lebs are empty LEBs that have |
| * already been allocated for some purpose. |
| * |
| * Note, @c->idx_gc_cnt is included to both @c->lst.empty_lebs (because |
| * these LEBs are empty) and to @c->lst.taken_empty_lebs (because they |
| * are taken until after the commit). |
| * |
| * Note, @c->lst.taken_empty_lebs may temporarily be higher by one |
| * because of the way we serialize LEB allocations and budgeting. See a |
| * comment in 'ubifs_find_free_space()'. |
| */ |
| lebs = c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt - |
| c->lst.taken_empty_lebs; |
| if (unlikely(rsvd_idx_lebs > lebs)) { |
| dbg_budg("out of indexing space: min_idx_lebs %d (old %d), rsvd_idx_lebs %d", |
| min_idx_lebs, c->bi.min_idx_lebs, rsvd_idx_lebs); |
| return -ENOSPC; |
| } |
| |
| available = ubifs_calc_available(c, min_idx_lebs); |
| outstanding = c->bi.data_growth + c->bi.dd_growth; |
| |
| if (unlikely(available < outstanding)) { |
| dbg_budg("out of data space: available %lld, outstanding %lld", |
| available, outstanding); |
| return -ENOSPC; |
| } |
| |
| if (available - outstanding <= c->rp_size && !can_use_rp(c)) |
| return -ENOSPC; |
| |
| c->bi.min_idx_lebs = min_idx_lebs; |
| return 0; |
| } |
| |
| /** |
| * calc_idx_growth - calculate approximate index growth from budgeting request. |
| * @c: UBIFS file-system description object |
| * @req: budgeting request |
| * |
| * For now we assume each new node adds one znode. But this is rather poor |
| * approximation, though. |
| */ |
| static int calc_idx_growth(const struct ubifs_info *c, |
| const struct ubifs_budget_req *req) |
| { |
| int znodes; |
| |
| znodes = req->new_ino + (req->new_page << UBIFS_BLOCKS_PER_PAGE_SHIFT) + |
| req->new_dent; |
| return znodes * c->max_idx_node_sz; |
| } |
| |
| /** |
| * calc_data_growth - calculate approximate amount of new data from budgeting |
| * request. |
| * @c: UBIFS file-system description object |
| * @req: budgeting request |
| */ |
| static int calc_data_growth(const struct ubifs_info *c, |
| const struct ubifs_budget_req *req) |
| { |
| int data_growth; |
| |
| data_growth = req->new_ino ? c->bi.inode_budget : 0; |
| if (req->new_page) |
| data_growth += c->bi.page_budget; |
| if (req->new_dent) |
| data_growth += c->bi.dent_budget; |
| data_growth += req->new_ino_d; |
| return data_growth; |
| } |
| |
| /** |
| * calc_dd_growth - calculate approximate amount of data which makes other data |
| * dirty from budgeting request. |
| * @c: UBIFS file-system description object |
| * @req: budgeting request |
| */ |
| static int calc_dd_growth(const struct ubifs_info *c, |
| const struct ubifs_budget_req *req) |
| { |
| int dd_growth; |
| |
| dd_growth = req->dirtied_page ? c->bi.page_budget : 0; |
| |
| if (req->dirtied_ino) |
| dd_growth += c->bi.inode_budget << (req->dirtied_ino - 1); |
| if (req->mod_dent) |
| dd_growth += c->bi.dent_budget; |
| dd_growth += req->dirtied_ino_d; |
| return dd_growth; |
| } |
| |
| /** |
| * ubifs_budget_space - ensure there is enough space to complete an operation. |
| * @c: UBIFS file-system description object |
| * @req: budget request |
| * |
| * This function allocates budget for an operation. It uses pessimistic |
| * approximation of how much flash space the operation needs. The goal of this |
| * function is to make sure UBIFS always has flash space to flush all dirty |
| * pages, dirty inodes, and dirty znodes (liability). This function may force |
| * commit, garbage-collection or write-back. Returns zero in case of success, |
| * %-ENOSPC if there is no free space and other negative error codes in case of |
| * failures. |
| */ |
| int ubifs_budget_space(struct ubifs_info *c, struct ubifs_budget_req *req) |
| { |
| int err, idx_growth, data_growth, dd_growth, retried = 0; |
| |
| ubifs_assert(c, req->new_page <= 1); |
| ubifs_assert(c, req->dirtied_page <= 1); |
| ubifs_assert(c, req->new_dent <= 1); |
| ubifs_assert(c, req->mod_dent <= 1); |
| ubifs_assert(c, req->new_ino <= 1); |
| ubifs_assert(c, req->new_ino_d <= UBIFS_MAX_INO_DATA); |
| ubifs_assert(c, req->dirtied_ino <= 4); |
| ubifs_assert(c, req->dirtied_ino_d <= UBIFS_MAX_INO_DATA * 4); |
| ubifs_assert(c, !(req->new_ino_d & 7)); |
| ubifs_assert(c, !(req->dirtied_ino_d & 7)); |
| |
| data_growth = calc_data_growth(c, req); |
| dd_growth = calc_dd_growth(c, req); |
| if (!data_growth && !dd_growth) |
| return 0; |
| idx_growth = calc_idx_growth(c, req); |
| |
| again: |
| spin_lock(&c->space_lock); |
| ubifs_assert(c, c->bi.idx_growth >= 0); |
| ubifs_assert(c, c->bi.data_growth >= 0); |
| ubifs_assert(c, c->bi.dd_growth >= 0); |
| |
| if (unlikely(c->bi.nospace) && (c->bi.nospace_rp || !can_use_rp(c))) { |
| dbg_budg("no space"); |
| spin_unlock(&c->space_lock); |
| return -ENOSPC; |
| } |
| |
| c->bi.idx_growth += idx_growth; |
| c->bi.data_growth += data_growth; |
| c->bi.dd_growth += dd_growth; |
| |
| err = do_budget_space(c); |
| if (likely(!err)) { |
| req->idx_growth = idx_growth; |
| req->data_growth = data_growth; |
| req->dd_growth = dd_growth; |
| spin_unlock(&c->space_lock); |
| return 0; |
| } |
| |
| /* Restore the old values */ |
| c->bi.idx_growth -= idx_growth; |
| c->bi.data_growth -= data_growth; |
| c->bi.dd_growth -= dd_growth; |
| spin_unlock(&c->space_lock); |
| |
| if (req->fast) { |
| dbg_budg("no space for fast budgeting"); |
| return err; |
| } |
| |
| err = make_free_space(c); |
| cond_resched(); |
| if (err == -EAGAIN) { |
| dbg_budg("try again"); |
| goto again; |
| } else if (err == -ENOSPC) { |
| if (!retried) { |
| retried = 1; |
| dbg_budg("-ENOSPC, but anyway try once again"); |
| goto again; |
| } |
| dbg_budg("FS is full, -ENOSPC"); |
| c->bi.nospace = 1; |
| if (can_use_rp(c) || c->rp_size == 0) |
| c->bi.nospace_rp = 1; |
| smp_wmb(); |
| } else |
| ubifs_err(c, "cannot budget space, error %d", err); |
| return err; |
| } |
| |
| /** |
| * ubifs_release_budget - release budgeted free space. |
| * @c: UBIFS file-system description object |
| * @req: budget request |
| * |
| * This function releases the space budgeted by 'ubifs_budget_space()'. Note, |
| * since the index changes (which were budgeted for in @req->idx_growth) will |
| * only be written to the media on commit, this function moves the index budget |
| * from @c->bi.idx_growth to @c->bi.uncommitted_idx. The latter will be zeroed |
| * by the commit operation. |
| */ |
| void ubifs_release_budget(struct ubifs_info *c, struct ubifs_budget_req *req) |
| { |
| ubifs_assert(c, req->new_page <= 1); |
| ubifs_assert(c, req->dirtied_page <= 1); |
| ubifs_assert(c, req->new_dent <= 1); |
| ubifs_assert(c, req->mod_dent <= 1); |
| ubifs_assert(c, req->new_ino <= 1); |
| ubifs_assert(c, req->new_ino_d <= UBIFS_MAX_INO_DATA); |
| ubifs_assert(c, req->dirtied_ino <= 4); |
| ubifs_assert(c, req->dirtied_ino_d <= UBIFS_MAX_INO_DATA * 4); |
| ubifs_assert(c, !(req->new_ino_d & 7)); |
| ubifs_assert(c, !(req->dirtied_ino_d & 7)); |
| if (!req->recalculate) { |
| ubifs_assert(c, req->idx_growth >= 0); |
| ubifs_assert(c, req->data_growth >= 0); |
| ubifs_assert(c, req->dd_growth >= 0); |
| } |
| |
| if (req->recalculate) { |
| req->data_growth = calc_data_growth(c, req); |
| req->dd_growth = calc_dd_growth(c, req); |
| req->idx_growth = calc_idx_growth(c, req); |
| } |
| |
| if (!req->data_growth && !req->dd_growth) |
| return; |
| |
| c->bi.nospace = c->bi.nospace_rp = 0; |
| smp_wmb(); |
| |
| spin_lock(&c->space_lock); |
| c->bi.idx_growth -= req->idx_growth; |
| c->bi.uncommitted_idx += req->idx_growth; |
| c->bi.data_growth -= req->data_growth; |
| c->bi.dd_growth -= req->dd_growth; |
| c->bi.min_idx_lebs = ubifs_calc_min_idx_lebs(c); |
| |
| ubifs_assert(c, c->bi.idx_growth >= 0); |
| ubifs_assert(c, c->bi.data_growth >= 0); |
| ubifs_assert(c, c->bi.dd_growth >= 0); |
| ubifs_assert(c, c->bi.min_idx_lebs < c->main_lebs); |
| ubifs_assert(c, !(c->bi.idx_growth & 7)); |
| ubifs_assert(c, !(c->bi.data_growth & 7)); |
| ubifs_assert(c, !(c->bi.dd_growth & 7)); |
| spin_unlock(&c->space_lock); |
| } |
| |
| /** |
| * ubifs_convert_page_budget - convert budget of a new page. |
| * @c: UBIFS file-system description object |
| * |
| * This function converts budget which was allocated for a new page of data to |
| * the budget of changing an existing page of data. The latter is smaller than |
| * the former, so this function only does simple re-calculation and does not |
| * involve any write-back. |
| */ |
| void ubifs_convert_page_budget(struct ubifs_info *c) |
| { |
| spin_lock(&c->space_lock); |
| /* Release the index growth reservation */ |
| c->bi.idx_growth -= c->max_idx_node_sz << UBIFS_BLOCKS_PER_PAGE_SHIFT; |
| /* Release the data growth reservation */ |
| c->bi.data_growth -= c->bi.page_budget; |
| /* Increase the dirty data growth reservation instead */ |
| c->bi.dd_growth += c->bi.page_budget; |
| /* And re-calculate the indexing space reservation */ |
| c->bi.min_idx_lebs = ubifs_calc_min_idx_lebs(c); |
| spin_unlock(&c->space_lock); |
| } |
| |
| /** |
| * ubifs_release_dirty_inode_budget - release dirty inode budget. |
| * @c: UBIFS file-system description object |
| * @ui: UBIFS inode to release the budget for |
| * |
| * This function releases budget corresponding to a dirty inode. It is usually |
| * called when after the inode has been written to the media and marked as |
| * clean. It also causes the "no space" flags to be cleared. |
| */ |
| void ubifs_release_dirty_inode_budget(struct ubifs_info *c, |
| struct ubifs_inode *ui) |
| { |
| struct ubifs_budget_req req; |
| |
| memset(&req, 0, sizeof(struct ubifs_budget_req)); |
| /* The "no space" flags will be cleared because dd_growth is > 0 */ |
| req.dd_growth = c->bi.inode_budget + ALIGN(ui->data_len, 8); |
| ubifs_release_budget(c, &req); |
| } |
| |
| /** |
| * ubifs_reported_space - calculate reported free space. |
| * @c: the UBIFS file-system description object |
| * @free: amount of free space |
| * |
| * This function calculates amount of free space which will be reported to |
| * user-space. User-space application tend to expect that if the file-system |
| * (e.g., via the 'statfs()' call) reports that it has N bytes available, they |
| * are able to write a file of size N. UBIFS attaches node headers to each data |
| * node and it has to write indexing nodes as well. This introduces additional |
| * overhead, and UBIFS has to report slightly less free space to meet the above |
| * expectations. |
| * |
| * This function assumes free space is made up of uncompressed data nodes and |
| * full index nodes (one per data node, tripled because we always allow enough |
| * space to write the index thrice). |
| * |
| * Note, the calculation is pessimistic, which means that most of the time |
| * UBIFS reports less space than it actually has. |
| */ |
| long long ubifs_reported_space(const struct ubifs_info *c, long long free) |
| { |
| int divisor, factor, f; |
| |
| /* |
| * Reported space size is @free * X, where X is UBIFS block size |
| * divided by UBIFS block size + all overhead one data block |
| * introduces. The overhead is the node header + indexing overhead. |
| * |
| * Indexing overhead calculations are based on the following formula: |
| * I = N/(f - 1) + 1, where I - number of indexing nodes, N - number |
| * of data nodes, f - fanout. Because effective UBIFS fanout is twice |
| * as less than maximum fanout, we assume that each data node |
| * introduces 3 * @c->max_idx_node_sz / (@c->fanout/2 - 1) bytes. |
| * Note, the multiplier 3 is because UBIFS reserves thrice as more space |
| * for the index. |
| */ |
| f = c->fanout > 3 ? c->fanout >> 1 : 2; |
| factor = UBIFS_BLOCK_SIZE; |
| divisor = UBIFS_MAX_DATA_NODE_SZ; |
| divisor += (c->max_idx_node_sz * 3) / (f - 1); |
| free *= factor; |
| return div_u64(free, divisor); |
| } |
| |
| /** |
| * ubifs_get_free_space_nolock - return amount of free space. |
| * @c: UBIFS file-system description object |
| * |
| * This function calculates amount of free space to report to user-space. |
| * |
| * Because UBIFS may introduce substantial overhead (the index, node headers, |
| * alignment, wastage at the end of LEBs, etc), it cannot report real amount of |
| * free flash space it has (well, because not all dirty space is reclaimable, |
| * UBIFS does not actually know the real amount). If UBIFS did so, it would |
| * bread user expectations about what free space is. Users seem to accustomed |
| * to assume that if the file-system reports N bytes of free space, they would |
| * be able to fit a file of N bytes to the FS. This almost works for |
| * traditional file-systems, because they have way less overhead than UBIFS. |
| * So, to keep users happy, UBIFS tries to take the overhead into account. |
| */ |
| long long ubifs_get_free_space_nolock(struct ubifs_info *c) |
| { |
| int rsvd_idx_lebs, lebs; |
| long long available, outstanding, free; |
| |
| ubifs_assert(c, c->bi.min_idx_lebs == ubifs_calc_min_idx_lebs(c)); |
| outstanding = c->bi.data_growth + c->bi.dd_growth; |
| available = ubifs_calc_available(c, c->bi.min_idx_lebs); |
| |
| /* |
| * When reporting free space to user-space, UBIFS guarantees that it is |
| * possible to write a file of free space size. This means that for |
| * empty LEBs we may use more precise calculations than |
| * 'ubifs_calc_available()' is using. Namely, we know that in empty |
| * LEBs we would waste only @c->leb_overhead bytes, not @c->dark_wm. |
| * Thus, amend the available space. |
| * |
| * Note, the calculations below are similar to what we have in |
| * 'do_budget_space()', so refer there for comments. |
| */ |
| if (c->bi.min_idx_lebs > c->lst.idx_lebs) |
| rsvd_idx_lebs = c->bi.min_idx_lebs - c->lst.idx_lebs; |
| else |
| rsvd_idx_lebs = 0; |
| lebs = c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt - |
| c->lst.taken_empty_lebs; |
| lebs -= rsvd_idx_lebs; |
| available += lebs * (c->dark_wm - c->leb_overhead); |
| |
| if (available > outstanding) |
| free = ubifs_reported_space(c, available - outstanding); |
| else |
| free = 0; |
| return free; |
| } |
| |
| /** |
| * ubifs_get_free_space - return amount of free space. |
| * @c: UBIFS file-system description object |
| * |
| * This function calculates and returns amount of free space to report to |
| * user-space. |
| */ |
| long long ubifs_get_free_space(struct ubifs_info *c) |
| { |
| long long free; |
| |
| spin_lock(&c->space_lock); |
| free = ubifs_get_free_space_nolock(c); |
| spin_unlock(&c->space_lock); |
| |
| return free; |
| } |