| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * This file is part of UBIFS. |
| * |
| * Copyright (C) 2006-2008 Nokia Corporation. |
| * Copyright (C) 2006, 2007 University of Szeged, Hungary |
| * |
| * Authors: Adrian Hunter |
| * Artem Bityutskiy (Битюцкий Артём) |
| * Zoltan Sogor |
| */ |
| |
| /* |
| * This file provides a single place to access to compression and |
| * decompression. |
| */ |
| |
| #include <linux/crypto.h> |
| #include "ubifs.h" |
| |
| /* Fake description object for the "none" compressor */ |
| static struct ubifs_compressor none_compr = { |
| .compr_type = UBIFS_COMPR_NONE, |
| .name = "none", |
| .capi_name = "", |
| }; |
| |
| #ifdef CONFIG_UBIFS_FS_LZO |
| static DEFINE_MUTEX(lzo_mutex); |
| |
| static struct ubifs_compressor lzo_compr = { |
| .compr_type = UBIFS_COMPR_LZO, |
| .comp_mutex = &lzo_mutex, |
| .name = "lzo", |
| .capi_name = "lzo", |
| }; |
| #else |
| static struct ubifs_compressor lzo_compr = { |
| .compr_type = UBIFS_COMPR_LZO, |
| .name = "lzo", |
| }; |
| #endif |
| |
| #ifdef CONFIG_UBIFS_FS_ZLIB |
| static DEFINE_MUTEX(deflate_mutex); |
| static DEFINE_MUTEX(inflate_mutex); |
| |
| static struct ubifs_compressor zlib_compr = { |
| .compr_type = UBIFS_COMPR_ZLIB, |
| .comp_mutex = &deflate_mutex, |
| .decomp_mutex = &inflate_mutex, |
| .name = "zlib", |
| .capi_name = "deflate", |
| }; |
| #else |
| static struct ubifs_compressor zlib_compr = { |
| .compr_type = UBIFS_COMPR_ZLIB, |
| .name = "zlib", |
| }; |
| #endif |
| |
| /* All UBIFS compressors */ |
| struct ubifs_compressor *ubifs_compressors[UBIFS_COMPR_TYPES_CNT]; |
| |
| /** |
| * ubifs_compress - compress data. |
| * @in_buf: data to compress |
| * @in_len: length of the data to compress |
| * @out_buf: output buffer where compressed data should be stored |
| * @out_len: output buffer length is returned here |
| * @compr_type: type of compression to use on enter, actually used compression |
| * type on exit |
| * |
| * This function compresses input buffer @in_buf of length @in_len and stores |
| * the result in the output buffer @out_buf and the resulting length in |
| * @out_len. If the input buffer does not compress, it is just copied to the |
| * @out_buf. The same happens if @compr_type is %UBIFS_COMPR_NONE or if |
| * compression error occurred. |
| * |
| * Note, if the input buffer was not compressed, it is copied to the output |
| * buffer and %UBIFS_COMPR_NONE is returned in @compr_type. |
| */ |
| void ubifs_compress(const struct ubifs_info *c, const void *in_buf, |
| int in_len, void *out_buf, int *out_len, int *compr_type) |
| { |
| int err; |
| struct ubifs_compressor *compr = ubifs_compressors[*compr_type]; |
| |
| if (*compr_type == UBIFS_COMPR_NONE) |
| goto no_compr; |
| |
| /* If the input data is small, do not even try to compress it */ |
| if (in_len < UBIFS_MIN_COMPR_LEN) |
| goto no_compr; |
| |
| if (compr->comp_mutex) |
| mutex_lock(compr->comp_mutex); |
| err = crypto_comp_compress(compr->cc, in_buf, in_len, out_buf, |
| (unsigned int *)out_len); |
| if (compr->comp_mutex) |
| mutex_unlock(compr->comp_mutex); |
| if (unlikely(err)) { |
| ubifs_warn(c, "cannot compress %d bytes, compressor %s, error %d, leave data uncompressed", |
| in_len, compr->name, err); |
| goto no_compr; |
| } |
| |
| /* |
| * If the data compressed only slightly, it is better to leave it |
| * uncompressed to improve read speed. |
| */ |
| if (in_len - *out_len < UBIFS_MIN_COMPRESS_DIFF) |
| goto no_compr; |
| |
| return; |
| |
| no_compr: |
| memcpy(out_buf, in_buf, in_len); |
| *out_len = in_len; |
| *compr_type = UBIFS_COMPR_NONE; |
| } |
| |
| /** |
| * ubifs_decompress - decompress data. |
| * @in_buf: data to decompress |
| * @in_len: length of the data to decompress |
| * @out_buf: output buffer where decompressed data should |
| * @out_len: output length is returned here |
| * @compr_type: type of compression |
| * |
| * This function decompresses data from buffer @in_buf into buffer @out_buf. |
| * The length of the uncompressed data is returned in @out_len. This functions |
| * returns %0 on success or a negative error code on failure. |
| */ |
| int ubifs_decompress(const struct ubifs_info *c, const void *in_buf, |
| int in_len, void *out_buf, int *out_len, int compr_type) |
| { |
| int err; |
| struct ubifs_compressor *compr; |
| |
| if (unlikely(compr_type < 0 || compr_type >= UBIFS_COMPR_TYPES_CNT)) { |
| ubifs_err(c, "invalid compression type %d", compr_type); |
| return -EINVAL; |
| } |
| |
| compr = ubifs_compressors[compr_type]; |
| |
| if (unlikely(!compr->capi_name)) { |
| ubifs_err(c, "%s compression is not compiled in", compr->name); |
| return -EINVAL; |
| } |
| |
| if (compr_type == UBIFS_COMPR_NONE) { |
| memcpy(out_buf, in_buf, in_len); |
| *out_len = in_len; |
| return 0; |
| } |
| |
| if (compr->decomp_mutex) |
| mutex_lock(compr->decomp_mutex); |
| err = crypto_comp_decompress(compr->cc, in_buf, in_len, out_buf, |
| (unsigned int *)out_len); |
| if (compr->decomp_mutex) |
| mutex_unlock(compr->decomp_mutex); |
| if (err) |
| ubifs_err(c, "cannot decompress %d bytes, compressor %s, error %d", |
| in_len, compr->name, err); |
| |
| return err; |
| } |
| |
| /** |
| * compr_init - initialize a compressor. |
| * @compr: compressor description object |
| * |
| * This function initializes the requested compressor and returns zero in case |
| * of success or a negative error code in case of failure. |
| */ |
| static int __init compr_init(struct ubifs_compressor *compr) |
| { |
| if (compr->capi_name) { |
| compr->cc = crypto_alloc_comp(compr->capi_name, 0, 0); |
| if (IS_ERR(compr->cc)) { |
| pr_err("UBIFS error (pid %d): cannot initialize compressor %s, error %ld", |
| current->pid, compr->name, PTR_ERR(compr->cc)); |
| return PTR_ERR(compr->cc); |
| } |
| } |
| |
| ubifs_compressors[compr->compr_type] = compr; |
| return 0; |
| } |
| |
| /** |
| * compr_exit - de-initialize a compressor. |
| * @compr: compressor description object |
| */ |
| static void compr_exit(struct ubifs_compressor *compr) |
| { |
| if (compr->capi_name) |
| crypto_free_comp(compr->cc); |
| return; |
| } |
| |
| /** |
| * ubifs_compressors_init - initialize UBIFS compressors. |
| * |
| * This function initializes the compressor which were compiled in. Returns |
| * zero in case of success and a negative error code in case of failure. |
| */ |
| int __init ubifs_compressors_init(void) |
| { |
| int err; |
| |
| err = compr_init(&lzo_compr); |
| if (err) |
| return err; |
| |
| err = compr_init(&zlib_compr); |
| if (err) |
| goto out_lzo; |
| |
| ubifs_compressors[UBIFS_COMPR_NONE] = &none_compr; |
| return 0; |
| |
| out_lzo: |
| compr_exit(&lzo_compr); |
| return err; |
| } |
| |
| /** |
| * ubifs_compressors_exit - de-initialize UBIFS compressors. |
| */ |
| void ubifs_compressors_exit(void) |
| { |
| compr_exit(&lzo_compr); |
| compr_exit(&zlib_compr); |
| } |