| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * dwc3-keystone.c - Keystone Specific Glue layer |
| * |
| * Copyright (C) 2010-2013 Texas Instruments Incorporated - https://www.ti.com |
| * |
| * Author: WingMan Kwok <w-kwok2@ti.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/io.h> |
| #include <linux/of_platform.h> |
| #include <linux/phy/phy.h> |
| #include <linux/pm_runtime.h> |
| |
| /* USBSS register offsets */ |
| #define USBSS_REVISION 0x0000 |
| #define USBSS_SYSCONFIG 0x0010 |
| #define USBSS_IRQ_EOI 0x0018 |
| #define USBSS_IRQSTATUS_RAW_0 0x0020 |
| #define USBSS_IRQSTATUS_0 0x0024 |
| #define USBSS_IRQENABLE_SET_0 0x0028 |
| #define USBSS_IRQENABLE_CLR_0 0x002c |
| |
| /* IRQ register bits */ |
| #define USBSS_IRQ_EOI_LINE(n) BIT(n) |
| #define USBSS_IRQ_EVENT_ST BIT(0) |
| #define USBSS_IRQ_COREIRQ_EN BIT(0) |
| #define USBSS_IRQ_COREIRQ_CLR BIT(0) |
| |
| struct dwc3_keystone { |
| struct device *dev; |
| void __iomem *usbss; |
| struct phy *usb3_phy; |
| }; |
| |
| static inline u32 kdwc3_readl(void __iomem *base, u32 offset) |
| { |
| return readl(base + offset); |
| } |
| |
| static inline void kdwc3_writel(void __iomem *base, u32 offset, u32 value) |
| { |
| writel(value, base + offset); |
| } |
| |
| static void kdwc3_enable_irqs(struct dwc3_keystone *kdwc) |
| { |
| u32 val; |
| |
| val = kdwc3_readl(kdwc->usbss, USBSS_IRQENABLE_SET_0); |
| val |= USBSS_IRQ_COREIRQ_EN; |
| kdwc3_writel(kdwc->usbss, USBSS_IRQENABLE_SET_0, val); |
| } |
| |
| static void kdwc3_disable_irqs(struct dwc3_keystone *kdwc) |
| { |
| u32 val; |
| |
| val = kdwc3_readl(kdwc->usbss, USBSS_IRQENABLE_SET_0); |
| val &= ~USBSS_IRQ_COREIRQ_EN; |
| kdwc3_writel(kdwc->usbss, USBSS_IRQENABLE_SET_0, val); |
| } |
| |
| static irqreturn_t dwc3_keystone_interrupt(int irq, void *_kdwc) |
| { |
| struct dwc3_keystone *kdwc = _kdwc; |
| |
| kdwc3_writel(kdwc->usbss, USBSS_IRQENABLE_CLR_0, USBSS_IRQ_COREIRQ_CLR); |
| kdwc3_writel(kdwc->usbss, USBSS_IRQSTATUS_0, USBSS_IRQ_EVENT_ST); |
| kdwc3_writel(kdwc->usbss, USBSS_IRQENABLE_SET_0, USBSS_IRQ_COREIRQ_EN); |
| kdwc3_writel(kdwc->usbss, USBSS_IRQ_EOI, USBSS_IRQ_EOI_LINE(0)); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int kdwc3_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *node = pdev->dev.of_node; |
| struct dwc3_keystone *kdwc; |
| int error, irq; |
| |
| kdwc = devm_kzalloc(dev, sizeof(*kdwc), GFP_KERNEL); |
| if (!kdwc) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, kdwc); |
| |
| kdwc->dev = dev; |
| |
| kdwc->usbss = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(kdwc->usbss)) |
| return PTR_ERR(kdwc->usbss); |
| |
| /* PSC dependency on AM65 needs SERDES0 to be powered before USB0 */ |
| kdwc->usb3_phy = devm_phy_optional_get(dev, "usb3-phy"); |
| if (IS_ERR(kdwc->usb3_phy)) |
| return dev_err_probe(dev, PTR_ERR(kdwc->usb3_phy), "couldn't get usb3 phy\n"); |
| |
| phy_pm_runtime_get_sync(kdwc->usb3_phy); |
| |
| error = phy_reset(kdwc->usb3_phy); |
| if (error < 0) { |
| dev_err(dev, "usb3 phy reset failed: %d\n", error); |
| return error; |
| } |
| |
| error = phy_init(kdwc->usb3_phy); |
| if (error < 0) { |
| dev_err(dev, "usb3 phy init failed: %d\n", error); |
| return error; |
| } |
| |
| error = phy_power_on(kdwc->usb3_phy); |
| if (error < 0) { |
| dev_err(dev, "usb3 phy power on failed: %d\n", error); |
| phy_exit(kdwc->usb3_phy); |
| return error; |
| } |
| |
| pm_runtime_enable(kdwc->dev); |
| error = pm_runtime_get_sync(kdwc->dev); |
| if (error < 0) { |
| dev_err(kdwc->dev, "pm_runtime_get_sync failed, error %d\n", |
| error); |
| goto err_irq; |
| } |
| |
| /* IRQ processing not required currently for AM65 */ |
| if (of_device_is_compatible(node, "ti,am654-dwc3")) |
| goto skip_irq; |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| error = irq; |
| goto err_irq; |
| } |
| |
| error = devm_request_irq(dev, irq, dwc3_keystone_interrupt, IRQF_SHARED, |
| dev_name(dev), kdwc); |
| if (error) { |
| dev_err(dev, "failed to request IRQ #%d --> %d\n", |
| irq, error); |
| goto err_irq; |
| } |
| |
| kdwc3_enable_irqs(kdwc); |
| |
| skip_irq: |
| error = of_platform_populate(node, NULL, NULL, dev); |
| if (error) { |
| dev_err(&pdev->dev, "failed to create dwc3 core\n"); |
| goto err_core; |
| } |
| |
| return 0; |
| |
| err_core: |
| kdwc3_disable_irqs(kdwc); |
| err_irq: |
| pm_runtime_put_sync(kdwc->dev); |
| pm_runtime_disable(kdwc->dev); |
| phy_power_off(kdwc->usb3_phy); |
| phy_exit(kdwc->usb3_phy); |
| phy_pm_runtime_put_sync(kdwc->usb3_phy); |
| |
| return error; |
| } |
| |
| static int kdwc3_remove_core(struct device *dev, void *c) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| |
| platform_device_unregister(pdev); |
| |
| return 0; |
| } |
| |
| static void kdwc3_remove(struct platform_device *pdev) |
| { |
| struct dwc3_keystone *kdwc = platform_get_drvdata(pdev); |
| struct device_node *node = pdev->dev.of_node; |
| |
| if (!of_device_is_compatible(node, "ti,am654-dwc3")) |
| kdwc3_disable_irqs(kdwc); |
| |
| device_for_each_child(&pdev->dev, NULL, kdwc3_remove_core); |
| pm_runtime_put_sync(kdwc->dev); |
| pm_runtime_disable(kdwc->dev); |
| |
| phy_power_off(kdwc->usb3_phy); |
| phy_exit(kdwc->usb3_phy); |
| phy_pm_runtime_put_sync(kdwc->usb3_phy); |
| |
| platform_set_drvdata(pdev, NULL); |
| } |
| |
| static const struct of_device_id kdwc3_of_match[] = { |
| { .compatible = "ti,keystone-dwc3", }, |
| { .compatible = "ti,am654-dwc3" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, kdwc3_of_match); |
| |
| static struct platform_driver kdwc3_driver = { |
| .probe = kdwc3_probe, |
| .remove_new = kdwc3_remove, |
| .driver = { |
| .name = "keystone-dwc3", |
| .of_match_table = kdwc3_of_match, |
| }, |
| }; |
| |
| module_platform_driver(kdwc3_driver); |
| |
| MODULE_ALIAS("platform:keystone-dwc3"); |
| MODULE_AUTHOR("WingMan Kwok <w-kwok2@ti.com>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("DesignWare USB3 KEYSTONE Glue Layer"); |