| # SPDX-License-Identifier: GPL-2.0 |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/display/bridge/anx6345.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Analogix ANX6345 eDP Transmitter Device Tree Bindings |
| |
| maintainers: |
| - Torsten Duwe <duwe@lst.de> |
| |
| description: | |
| The ANX6345 is an ultra-low power Full-HD eDP transmitter designed for |
| portable devices. |
| |
| properties: |
| compatible: |
| const: analogix,anx6345 |
| |
| reg: |
| maxItems: 1 |
| description: base I2C address of the device |
| |
| reset-gpios: |
| maxItems: 1 |
| description: GPIO connected to active low reset |
| |
| dvdd12-supply: |
| description: Regulator for 1.2V digital core power. |
| |
| dvdd25-supply: |
| description: Regulator for 2.5V digital core power. |
| |
| ports: |
| $ref: /schemas/graph.yaml#/properties/ports |
| |
| properties: |
| port@0: |
| $ref: /schemas/graph.yaml#/properties/port |
| description: |
| Video port for LVTTL input |
| |
| port@1: |
| $ref: /schemas/graph.yaml#/properties/port |
| description: |
| Video port for eDP output (panel or connector). |
| May be omitted if EDID works reliably. |
| |
| required: |
| - port@0 |
| |
| required: |
| - compatible |
| - reg |
| - reset-gpios |
| - dvdd12-supply |
| - dvdd25-supply |
| - ports |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| i2c0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| anx6345: anx6345@38 { |
| compatible = "analogix,anx6345"; |
| reg = <0x38>; |
| reset-gpios = <&pio42 1 /* GPIO_ACTIVE_LOW */>; |
| dvdd25-supply = <®_dldo2>; |
| dvdd12-supply = <®_fldo1>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| anx6345_in: port@0 { |
| reg = <0>; |
| anx6345_in_tcon0: endpoint { |
| remote-endpoint = <&tcon0_out_anx6345>; |
| }; |
| }; |
| |
| anx6345_out: port@1 { |
| reg = <1>; |
| anx6345_out_panel: endpoint { |
| remote-endpoint = <&panel_in_edp>; |
| }; |
| }; |
| }; |
| }; |
| }; |