blob: 0bc2e66d15b15621aa506ff2a3e0ad7fd300035e [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/interconnect/qcom,msm8974.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/reset/qcom,gcc-msm8974.h>
#include <dt-bindings/gpio/gpio.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&intc>;
clocks {
xo_board: xo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
};
sleep_clk: sleep_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_PPI 9 0xf04>;
CPU0: cpu@0 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v2";
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
qcom,acc = <&acc0>;
qcom,saw = <&saw0>;
cpu-idle-states = <&CPU_SPC>;
};
CPU1: cpu@1 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v2";
device_type = "cpu";
reg = <1>;
next-level-cache = <&L2>;
qcom,acc = <&acc1>;
qcom,saw = <&saw1>;
cpu-idle-states = <&CPU_SPC>;
};
CPU2: cpu@2 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v2";
device_type = "cpu";
reg = <2>;
next-level-cache = <&L2>;
qcom,acc = <&acc2>;
qcom,saw = <&saw2>;
cpu-idle-states = <&CPU_SPC>;
};
CPU3: cpu@3 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v2";
device_type = "cpu";
reg = <3>;
next-level-cache = <&L2>;
qcom,acc = <&acc3>;
qcom,saw = <&saw3>;
cpu-idle-states = <&CPU_SPC>;
};
L2: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
qcom,saw = <&saw_l2>;
};
idle-states {
CPU_SPC: spc {
compatible = "qcom,idle-state-spc",
"arm,idle-state";
entry-latency-us = <150>;
exit-latency-us = <200>;
min-residency-us = <2000>;
};
};
};
firmware {
scm {
compatible = "qcom,scm-msm8974", "qcom,scm";
clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
clock-names = "core", "bus", "iface";
};
};
memory {
device_type = "memory";
reg = <0x0 0x0>;
};
pmu {
compatible = "qcom,krait-pmu";
interrupts = <GIC_PPI 7 0xf04>;
};
rpm: remoteproc {
compatible = "qcom,msm8974-rpm-proc", "qcom,rpm-proc";
master-stats {
compatible = "qcom,rpm-master-stats";
qcom,rpm-msg-ram = <&apss_master_stats>,
<&mpss_master_stats>,
<&lpss_master_stats>,
<&pronto_master_stats>;
qcom,master-names = "APSS",
"MPSS",
"LPSS",
"PRONTO";
};
smd-edge {
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 0>;
qcom,smd-edge = <15>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-msm8974";
qcom,smd-channels = "rpm_requests";
rpmcc: clock-controller {
compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
#clock-cells = <1>;
clocks = <&xo_board>;
clock-names = "xo";
};
};
};
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
mpss_region: mpss@8000000 {
reg = <0x08000000 0x5100000>;
no-map;
};
mba_region: mba@d100000 {
reg = <0x0d100000 0x100000>;
no-map;
};
wcnss_region: wcnss@d200000 {
reg = <0x0d200000 0xa00000>;
no-map;
};
adsp_region: adsp@dc00000 {
reg = <0x0dc00000 0x1900000>;
no-map;
};
venus_region: memory@f500000 {
reg = <0x0f500000 0x500000>;
no-map;
};
smem_region: smem@fa00000 {
reg = <0xfa00000 0x200000>;
no-map;
};
tz_region: memory@fc00000 {
reg = <0x0fc00000 0x160000>;
no-map;
};
rfsa_mem: memory@fd60000 {
reg = <0x0fd60000 0x20000>;
no-map;
};
rmtfs@fd80000 {
compatible = "qcom,rmtfs-mem";
reg = <0x0fd80000 0x180000>;
no-map;
qcom,client-id = <1>;
};
};
smem {
compatible = "qcom,smem";
memory-region = <&smem_region>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
hwlocks = <&tcsr_mutex 3>;
};
smp2p-adsp {
compatible = "qcom,smp2p";
qcom,smem = <443>, <429>;
interrupt-parent = <&intc>;
interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 10>;
qcom,local-pid = <0>;
qcom,remote-pid = <2>;
adsp_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
adsp_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smp2p-modem {
compatible = "qcom,smp2p";
qcom,smem = <435>, <428>;
interrupt-parent = <&intc>;
interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 14>;
qcom,local-pid = <0>;
qcom,remote-pid = <1>;
modem_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
modem_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smp2p-wcnss {
compatible = "qcom,smp2p";
qcom,smem = <451>, <431>;
interrupt-parent = <&intc>;
interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 18>;
qcom,local-pid = <0>;
qcom,remote-pid = <4>;
wcnss_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
wcnss_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smsm {
compatible = "qcom,smsm";
#address-cells = <1>;
#size-cells = <0>;
qcom,ipc-1 = <&apcs 8 13>;
qcom,ipc-2 = <&apcs 8 9>;
qcom,ipc-3 = <&apcs 8 19>;
apps_smsm: apps@0 {
reg = <0>;
#qcom,smem-state-cells = <1>;
};
modem_smsm: modem@1 {
reg = <1>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
};
adsp_smsm: adsp@2 {
reg = <2>;
interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
};
wcnss_smsm: wcnss@7 {
reg = <7>;
interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "simple-bus";
intc: interrupt-controller@f9000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0xf9000000 0x1000>,
<0xf9002000 0x1000>;
};
apcs: syscon@f9011000 {
compatible = "syscon";
reg = <0xf9011000 0x1000>;
};
timer@f9020000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "arm,armv7-timer-mem";
reg = <0xf9020000 0x1000>;
clock-frequency = <19200000>;
frame@f9021000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9021000 0x1000>,
<0xf9022000 0x1000>;
};
frame@f9023000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9023000 0x1000>;
status = "disabled";
};
frame@f9024000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9024000 0x1000>;
status = "disabled";
};
frame@f9025000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9025000 0x1000>;
status = "disabled";
};
frame@f9026000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9026000 0x1000>;
status = "disabled";
};
frame@f9027000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9027000 0x1000>;
status = "disabled";
};
frame@f9028000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9028000 0x1000>;
status = "disabled";
};
};
saw0: power-controller@f9089000 {
compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
};
saw1: power-controller@f9099000 {
compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
};
saw2: power-controller@f90a9000 {
compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
};
saw3: power-controller@f90b9000 {
compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
};
saw_l2: power-controller@f9012000 {
compatible = "qcom,saw2";
reg = <0xf9012000 0x1000>;
regulator;
};
acc0: power-manager@f9088000 {
compatible = "qcom,kpss-acc-v2";
reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
};
acc1: power-manager@f9098000 {
compatible = "qcom,kpss-acc-v2";
reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
};
acc2: power-manager@f90a8000 {
compatible = "qcom,kpss-acc-v2";
reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
};
acc3: power-manager@f90b8000 {
compatible = "qcom,kpss-acc-v2";
reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
};
sdhc_1: mmc@f9824900 {
compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
reg-names = "hc", "core";
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_AHB_CLK>,
<&gcc GCC_SDCC1_APPS_CLK>,
<&xo_board>;
clock-names = "iface", "core", "xo";
bus-width = <8>;
non-removable;
status = "disabled";
};
sdhc_3: mmc@f9864900 {
compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
reg-names = "hc", "core";
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC3_AHB_CLK>,
<&gcc GCC_SDCC3_APPS_CLK>,
<&xo_board>;
clock-names = "iface", "core", "xo";
bus-width = <4>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
sdhc_2: mmc@f98a4900 {
compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
reg-names = "hc", "core";
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_AHB_CLK>,
<&gcc GCC_SDCC2_APPS_CLK>,
<&xo_board>;
clock-names = "iface", "core", "xo";
bus-width = <4>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp1_uart1: serial@f991d000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991d000 0x1000>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
blsp1_uart2: serial@f991e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991e000 0x1000>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_uart2_default>;
status = "disabled";
};
blsp1_i2c1: i2c@f9923000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9923000 0x1000>;
interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp1_i2c1_default>;
pinctrl-1 = <&blsp1_i2c1_sleep>;
#address-cells = <1>;
#size-cells = <0>;
};
blsp1_i2c2: i2c@f9924000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9924000 0x1000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp1_i2c2_default>;
pinctrl-1 = <&blsp1_i2c2_sleep>;
#address-cells = <1>;
#size-cells = <0>;
};
blsp1_i2c3: i2c@f9925000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9925000 0x1000>;
interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp1_i2c3_default>;
pinctrl-1 = <&blsp1_i2c3_sleep>;
#address-cells = <1>;
#size-cells = <0>;
};
blsp1_i2c6: i2c@f9928000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9928000 0x1000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp1_i2c6_default>;
pinctrl-1 = <&blsp1_i2c6_sleep>;
#address-cells = <1>;
#size-cells = <0>;
};
blsp2_dma: dma-controller@f9944000 {
compatible = "qcom,bam-v1.4.0";
reg = <0xf9944000 0x19000>;
interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
};
blsp2_uart1: serial@f995d000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf995d000 0x1000>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_uart1_default>;
pinctrl-1 = <&blsp2_uart1_sleep>;
status = "disabled";
};
blsp2_uart2: serial@f995e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf995e000 0x1000>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
blsp2_uart4: serial@f9960000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf9960000 0x1000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp2_uart4_default>;
status = "disabled";
};
blsp2_i2c2: i2c@f9964000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9964000 0x1000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_i2c2_default>;
pinctrl-1 = <&blsp2_i2c2_sleep>;
#address-cells = <1>;
#size-cells = <0>;
};
blsp2_i2c5: i2c@f9967000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9967000 0x1000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_i2c5_default>;
pinctrl-1 = <&blsp2_i2c5_sleep>;
#address-cells = <1>;
#size-cells = <0>;
};
blsp2_i2c6: i2c@f9968000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9968000 0x1000>;
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_i2c6_default>;
pinctrl-1 = <&blsp2_i2c6_sleep>;
#address-cells = <1>;
#size-cells = <0>;
};
usb: usb@f9a55000 {
compatible = "qcom,ci-hdrc";
reg = <0xf9a55000 0x200>,
<0xf9a55200 0x200>;
interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_USB_HS_AHB_CLK>,
<&gcc GCC_USB_HS_SYSTEM_CLK>;
clock-names = "iface", "core";
assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
assigned-clock-rates = <75000000>;
resets = <&gcc GCC_USB_HS_BCR>;
reset-names = "core";
phy_type = "ulpi";
dr_mode = "otg";
ahb-burst-config = <0>;
phy-names = "usb-phy";
status = "disabled";
#reset-cells = <1>;
ulpi {
usb_hs1_phy: phy-0 {
compatible = "qcom,usb-hs-phy-msm8974",
"qcom,usb-hs-phy";
#phy-cells = <0>;
clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
clock-names = "ref", "sleep";
resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
reset-names = "phy", "por";
status = "disabled";
};
usb_hs2_phy: phy-1 {
compatible = "qcom,usb-hs-phy-msm8974",
"qcom,usb-hs-phy";
#phy-cells = <0>;
clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>;
clock-names = "ref", "sleep";
resets = <&gcc GCC_USB2B_PHY_BCR>, <&usb 1>;
reset-names = "phy", "por";
status = "disabled";
};
};
};
rng@f9bff000 {
compatible = "qcom,prng";
reg = <0xf9bff000 0x200>;
clocks = <&gcc GCC_PRNG_AHB_CLK>;
clock-names = "core";
};
pronto: remoteproc@fb204000 {
compatible = "qcom,pronto-v2-pil", "qcom,pronto";
reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
reg-names = "ccu", "dxe", "pmu";
memory-region = <&wcnss_region>;
interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
<&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
qcom,smem-states = <&wcnss_smp2p_out 0>;
qcom,smem-state-names = "stop";
status = "disabled";
iris {
compatible = "qcom,wcn3680";
clocks = <&rpmcc RPM_SMD_CXO_A2>;
clock-names = "xo";
};
smd-edge {
interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 17>;
qcom,smd-edge = <6>;
wcnss {
compatible = "qcom,wcnss";
qcom,smd-channels = "WCNSS_CTRL";
status = "disabled";
qcom,mmio = <&pronto>;
bluetooth {
compatible = "qcom,wcnss-bt";
};
wifi {
compatible = "qcom,wcnss-wlan";
interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 146 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "tx", "rx";
qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
qcom,smem-state-names = "tx-enable",
"tx-rings-empty";
};
};
};
};
sram@fc190000 {
compatible = "qcom,msm8974-rpm-stats";
reg = <0xfc190000 0x10000>;
};
etf@fc307000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0xfc307000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
out-ports {
port {
etf_out: endpoint {
remote-endpoint = <&replicator_in>;
};
};
};
in-ports {
port {
etf_in: endpoint {
remote-endpoint = <&merger_out>;
};
};
};
};
tpiu@fc318000 {
compatible = "arm,coresight-tpiu", "arm,primecell";
reg = <0xfc318000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
in-ports {
port {
tpiu_in: endpoint {
remote-endpoint = <&replicator_out1>;
};
};
};
};
funnel@fc31a000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0xfc31a000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
in-ports {
#address-cells = <1>;
#size-cells = <0>;
/*
* Not described input ports:
* 0 - not-connected
* 1 - connected trought funnel to Multimedia CPU
* 2 - connected to Wireless CPU
* 3 - not-connected
* 4 - not-connected
* 6 - not-connected
* 7 - connected to STM
*/
port@5 {
reg = <5>;
funnel1_in5: endpoint {
remote-endpoint = <&kpss_out>;
};
};
};
out-ports {
port {
funnel1_out: endpoint {
remote-endpoint = <&merger_in1>;
};
};
};
};
funnel@fc31b000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0xfc31b000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
in-ports {
#address-cells = <1>;
#size-cells = <0>;
/*
* Not described input ports:
* 0 - connected trought funnel to Audio, Modem and
* Resource and Power Manager CPU's
* 2...7 - not-connected
*/
port@1 {
reg = <1>;
merger_in1: endpoint {
remote-endpoint = <&funnel1_out>;
};
};
};
out-ports {
port {
merger_out: endpoint {
remote-endpoint = <&etf_in>;
};
};
};
};
replicator@fc31c000 {
compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
reg = <0xfc31c000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
out-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
replicator_out0: endpoint {
remote-endpoint = <&etr_in>;
};
};
port@1 {
reg = <1>;
replicator_out1: endpoint {
remote-endpoint = <&tpiu_in>;
};
};
};
in-ports {
port {
replicator_in: endpoint {
remote-endpoint = <&etf_out>;
};
};
};
};
etr@fc322000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0xfc322000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
in-ports {
port {
etr_in: endpoint {
remote-endpoint = <&replicator_out0>;
};
};
};
};
etm@fc33c000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0xfc33c000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU0>;
out-ports {
port {
etm0_out: endpoint {
remote-endpoint = <&kpss_in0>;
};
};
};
};
etm@fc33d000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0xfc33d000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU1>;
out-ports {
port {
etm1_out: endpoint {
remote-endpoint = <&kpss_in1>;
};
};
};
};
etm@fc33e000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0xfc33e000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU2>;
out-ports {
port {
etm2_out: endpoint {
remote-endpoint = <&kpss_in2>;
};
};
};
};
etm@fc33f000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0xfc33f000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU3>;
out-ports {
port {
etm3_out: endpoint {
remote-endpoint = <&kpss_in3>;
};
};
};
};
/* KPSS funnel, only 4 inputs are used */
funnel@fc345000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0xfc345000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
kpss_in0: endpoint {
remote-endpoint = <&etm0_out>;
};
};
port@1 {
reg = <1>;
kpss_in1: endpoint {
remote-endpoint = <&etm1_out>;
};
};
port@2 {
reg = <2>;
kpss_in2: endpoint {
remote-endpoint = <&etm2_out>;
};
};
port@3 {
reg = <3>;
kpss_in3: endpoint {
remote-endpoint = <&etm3_out>;
};
};
};
out-ports {
port {
kpss_out: endpoint {
remote-endpoint = <&funnel1_in5>;
};
};
};
};
gcc: clock-controller@fc400000 {
compatible = "qcom,gcc-msm8974";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
reg = <0xfc400000 0x4000>;
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
<&sleep_clk>;
clock-names = "xo",
"sleep_clk";
};
rpm_msg_ram: sram@fc428000 {
compatible = "qcom,rpm-msg-ram";
reg = <0xfc428000 0x4000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0xfc428000 0x4000>;
apss_master_stats: sram@150 {
reg = <0x150 0x14>;
};
mpss_master_stats: sram@b50 {
reg = <0xb50 0x14>;
};
lpss_master_stats: sram@1550 {
reg = <0x1550 0x14>;
};
pronto_master_stats: sram@1f50 {
reg = <0x1f50 0x14>;
};
};
bimc: interconnect@fc380000 {
reg = <0xfc380000 0x6a000>;
compatible = "qcom,msm8974-bimc";
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
<&rpmcc RPM_SMD_BIMC_A_CLK>;
};
snoc: interconnect@fc460000 {
reg = <0xfc460000 0x4000>;
compatible = "qcom,msm8974-snoc";
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
<&rpmcc RPM_SMD_SNOC_A_CLK>;
};
pnoc: interconnect@fc468000 {
reg = <0xfc468000 0x4000>;
compatible = "qcom,msm8974-pnoc";
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
<&rpmcc RPM_SMD_PNOC_A_CLK>;
};
ocmemnoc: interconnect@fc470000 {
reg = <0xfc470000 0x4000>;
compatible = "qcom,msm8974-ocmemnoc";
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
<&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
};
mmssnoc: interconnect@fc478000 {
reg = <0xfc478000 0x4000>;
compatible = "qcom,msm8974-mmssnoc";
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&mmcc MMSS_S0_AXI_CLK>,
<&mmcc MMSS_S0_AXI_CLK>;
};
cnoc: interconnect@fc480000 {
reg = <0xfc480000 0x4000>;
compatible = "qcom,msm8974-cnoc";
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
<&rpmcc RPM_SMD_CNOC_A_CLK>;
};
tsens: thermal-sensor@fc4a9000 {
compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1";
reg = <0xfc4a9000 0x1000>, /* TM */
<0xfc4a8000 0x1000>; /* SROT */
nvmem-cells = <&tsens_mode>,
<&tsens_base1>, <&tsens_base2>,
<&tsens_use_backup>,
<&tsens_mode_backup>,
<&tsens_base1_backup>, <&tsens_base2_backup>,
<&tsens_s0_p1>, <&tsens_s0_p2>,
<&tsens_s1_p1>, <&tsens_s1_p2>,
<&tsens_s2_p1>, <&tsens_s2_p2>,
<&tsens_s3_p1>, <&tsens_s3_p2>,
<&tsens_s4_p1>, <&tsens_s4_p2>,
<&tsens_s5_p1>, <&tsens_s5_p2>,
<&tsens_s6_p1>, <&tsens_s6_p2>,
<&tsens_s7_p1>, <&tsens_s7_p2>,
<&tsens_s8_p1>, <&tsens_s8_p2>,
<&tsens_s9_p1>, <&tsens_s9_p2>,
<&tsens_s10_p1>, <&tsens_s10_p2>,
<&tsens_s0_p1_backup>, <&tsens_s0_p2_backup>,
<&tsens_s1_p1_backup>, <&tsens_s1_p2_backup>,
<&tsens_s2_p1_backup>, <&tsens_s2_p2_backup>,
<&tsens_s3_p1_backup>, <&tsens_s3_p2_backup>,
<&tsens_s4_p1_backup>, <&tsens_s4_p2_backup>,
<&tsens_s5_p1_backup>, <&tsens_s5_p2_backup>,
<&tsens_s6_p1_backup>, <&tsens_s6_p2_backup>,
<&tsens_s7_p1_backup>, <&tsens_s7_p2_backup>,
<&tsens_s8_p1_backup>, <&tsens_s8_p2_backup>,
<&tsens_s9_p1_backup>, <&tsens_s9_p2_backup>,
<&tsens_s10_p1_backup>, <&tsens_s10_p2_backup>;
nvmem-cell-names = "mode",
"base1", "base2",
"use_backup",
"mode_backup",
"base1_backup", "base2_backup",
"s0_p1", "s0_p2",
"s1_p1", "s1_p2",
"s2_p1", "s2_p2",
"s3_p1", "s3_p2",
"s4_p1", "s4_p2",
"s5_p1", "s5_p2",
"s6_p1", "s6_p2",
"s7_p1", "s7_p2",
"s8_p1", "s8_p2",
"s9_p1", "s9_p2",
"s10_p1", "s10_p2",
"s0_p1_backup", "s0_p2_backup",
"s1_p1_backup", "s1_p2_backup",
"s2_p1_backup", "s2_p2_backup",
"s3_p1_backup", "s3_p2_backup",
"s4_p1_backup", "s4_p2_backup",
"s5_p1_backup", "s5_p2_backup",
"s6_p1_backup", "s6_p2_backup",
"s7_p1_backup", "s7_p2_backup",
"s8_p1_backup", "s8_p2_backup",
"s9_p1_backup", "s9_p2_backup",
"s10_p1_backup", "s10_p2_backup";
#qcom,sensors = <11>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow";
#thermal-sensor-cells = <1>;
};
restart@fc4ab000 {
compatible = "qcom,pshold";
reg = <0xfc4ab000 0x4>;
};
qfprom: qfprom@fc4bc000 {
compatible = "qcom,msm8974-qfprom", "qcom,qfprom";
reg = <0xfc4bc000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
tsens_base1: base1@d0 {
reg = <0xd0 0x1>;
bits = <0 8>;
};
tsens_s0_p1: s0-p1@d1 {
reg = <0xd1 0x1>;
bits = <0 6>;
};
tsens_s1_p1: s1-p1@d2 {
reg = <0xd1 0x2>;
bits = <6 6>;
};
tsens_s2_p1: s2-p1@d2 {
reg = <0xd2 0x2>;
bits = <4 6>;
};
tsens_s3_p1: s3-p1@d3 {
reg = <0xd3 0x1>;
bits = <2 6>;
};
tsens_s4_p1: s4-p1@d4 {
reg = <0xd4 0x1>;
bits = <0 6>;
};
tsens_s5_p1: s5-p1@d4 {
reg = <0xd4 0x2>;
bits = <6 6>;
};
tsens_s6_p1: s6-p1@d5 {
reg = <0xd5 0x2>;
bits = <4 6>;
};
tsens_s7_p1: s7-p1@d6 {
reg = <0xd6 0x1>;
bits = <2 6>;
};
tsens_s8_p1: s8-p1@d7 {
reg = <0xd7 0x1>;
bits = <0 6>;
};
tsens_mode: mode@d7 {
reg = <0xd7 0x1>;
bits = <6 2>;
};
tsens_s9_p1: s9-p1@d8 {
reg = <0xd8 0x1>;
bits = <0 6>;
};
tsens_s10_p1: s10_p1@d8 {
reg = <0xd8 0x2>;
bits = <6 6>;
};
tsens_base2: base2@d9 {
reg = <0xd9 0x2>;
bits = <4 8>;
};
tsens_s0_p2: s0-p2@da {
reg = <0xda 0x2>;
bits = <4 6>;
};
tsens_s1_p2: s1-p2@db {
reg = <0xdb 0x1>;
bits = <2 6>;
};
tsens_s2_p2: s2-p2@dc {
reg = <0xdc 0x1>;
bits = <0 6>;
};
tsens_s3_p2: s3-p2@dc {
reg = <0xdc 0x2>;
bits = <6 6>;
};
tsens_s4_p2: s4-p2@dd {
reg = <0xdd 0x2>;
bits = <4 6>;
};
tsens_s5_p2: s5-p2@de {
reg = <0xde 0x2>;
bits = <2 6>;
};
tsens_s6_p2: s6-p2@df {
reg = <0xdf 0x1>;
bits = <0 6>;
};
tsens_s7_p2: s7-p2@e0 {
reg = <0xe0 0x1>;
bits = <0 6>;
};
tsens_s8_p2: s8-p2@e0 {
reg = <0xe0 0x2>;
bits = <6 6>;
};
tsens_s9_p2: s9-p2@e1 {
reg = <0xe1 0x2>;
bits = <4 6>;
};
tsens_s10_p2: s10_p2@e2 {
reg = <0xe2 0x2>;
bits = <2 6>;
};
tsens_s5_p2_backup: s5-p2_backup@e3 {
reg = <0xe3 0x2>;
bits = <0 6>;
};
tsens_mode_backup: mode_backup@e3 {
reg = <0xe3 0x1>;
bits = <6 2>;
};
tsens_s6_p2_backup: s6-p2_backup@e4 {
reg = <0xe4 0x1>;
bits = <0 6>;
};
tsens_s7_p2_backup: s7-p2_backup@e4 {
reg = <0xe4 0x2>;
bits = <6 6>;
};
tsens_s8_p2_backup: s8-p2_backup@e5 {
reg = <0xe5 0x2>;
bits = <4 6>;
};
tsens_s9_p2_backup: s9-p2_backup@e6 {
reg = <0xe6 0x2>;
bits = <2 6>;
};
tsens_s10_p2_backup: s10_p2_backup@e7 {
reg = <0xe7 0x1>;
bits = <0 6>;
};
tsens_base1_backup: base1_backup@440 {
reg = <0x440 0x1>;
bits = <0 8>;
};
tsens_s0_p1_backup: s0-p1_backup@441 {
reg = <0x441 0x1>;
bits = <0 6>;
};
tsens_s1_p1_backup: s1-p1_backup@442 {
reg = <0x441 0x2>;
bits = <6 6>;
};
tsens_s2_p1_backup: s2-p1_backup@442 {
reg = <0x442 0x2>;
bits = <4 6>;
};
tsens_s3_p1_backup: s3-p1_backup@443 {
reg = <0x443 0x1>;
bits = <2 6>;
};
tsens_s4_p1_backup: s4-p1_backup@444 {
reg = <0x444 0x1>;
bits = <0 6>;
};
tsens_s5_p1_backup: s5-p1_backup@444 {
reg = <0x444 0x2>;
bits = <6 6>;
};
tsens_s6_p1_backup: s6-p1_backup@445 {
reg = <0x445 0x2>;
bits = <4 6>;
};
tsens_s7_p1_backup: s7-p1_backup@446 {
reg = <0x446 0x1>;
bits = <2 6>;
};
tsens_use_backup: use_backup@447 {
reg = <0x447 0x1>;
bits = <5 3>;
};
tsens_s8_p1_backup: s8-p1_backup@448 {
reg = <0x448 0x1>;
bits = <0 6>;
};
tsens_s9_p1_backup: s9-p1_backup@448 {
reg = <0x448 0x2>;
bits = <6 6>;
};
tsens_s10_p1_backup: s10_p1_backup@449 {
reg = <0x449 0x2>;
bits = <4 6>;
};
tsens_base2_backup: base2_backup@44a {
reg = <0x44a 0x2>;
bits = <2 8>;
};
tsens_s0_p2_backup: s0-p2_backup@44b {
reg = <0x44b 0x3>;
bits = <2 6>;
};
tsens_s1_p2_backup: s1-p2_backup@44c {
reg = <0x44c 0x1>;
bits = <0 6>;
};
tsens_s2_p2_backup: s2-p2_backup@44c {
reg = <0x44c 0x2>;
bits = <6 6>;
};
tsens_s3_p2_backup: s3-p2_backup@44d {
reg = <0x44d 0x2>;
bits = <4 6>;
};
tsens_s4_p2_backup: s4-p2_backup@44e {
reg = <0x44e 0x1>;
bits = <2 6>;
};
};
spmi_bus: spmi@fc4cf000 {
compatible = "qcom,spmi-pmic-arb";
reg-names = "core", "intr", "cnfg";
reg = <0xfc4cf000 0x1000>,
<0xfc4cb000 0x1000>,
<0xfc4ca000 0x1000>;
interrupt-names = "periph_irq";
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
};
bam_dmux_dma: dma-controller@fc834000 {
compatible = "qcom,bam-v1.4.0";
reg = <0xfc834000 0x7000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
qcom,ee = <0>;
num-channels = <6>;
qcom,num-ees = <1>;
qcom,powered-remotely;
};
remoteproc_mss: remoteproc@fc880000 {
compatible = "qcom,msm8974-mss-pil";
reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
reg-names = "qdsp6", "rmb";
interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
<&gcc GCC_MSS_CFG_AHB_CLK>,
<&gcc GCC_BOOT_ROM_AHB_CLK>,
<&xo_board>;
clock-names = "iface", "bus", "mem", "xo";
resets = <&gcc GCC_MSS_RESTART>;
reset-names = "mss_restart";
qcom,halt-regs = <&tcsr_mutex 0x1180 0x1200 0x1280>;
qcom,smem-states = <&modem_smp2p_out 0>;
qcom,smem-state-names = "stop";
status = "disabled";
mba {
memory-region = <&mba_region>;
};
mpss {
memory-region = <&mpss_region>;
};
bam_dmux: bam-dmux {
compatible = "qcom,bam-dmux";
interrupt-parent = <&modem_smsm>;
interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "pc", "pc-ack";
qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
qcom,smem-state-names = "pc", "pc-ack";
dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
dma-names = "tx", "rx";
};
smd-edge {
interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 12>;
qcom,smd-edge = <0>;
label = "modem";
};
};
tcsr_mutex: hwlock@fd484000 {
compatible = "qcom,msm8974-tcsr-mutex", "qcom,tcsr-mutex", "syscon";
reg = <0xfd484000 0x2000>;
#hwlock-cells = <1>;
};
tcsr: syscon@fd4a0000 {
compatible = "qcom,tcsr-msm8974", "syscon";
reg = <0xfd4a0000 0x10000>;
};
tlmm: pinctrl@fd510000 {
compatible = "qcom,msm8974-pinctrl";
reg = <0xfd510000 0x4000>;
gpio-controller;
gpio-ranges = <&tlmm 0 0 146>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
sdc1_off: sdc1-off-state {
clk-pins {
pins = "sdc1_clk";
bias-disable;
drive-strength = <2>;
};
cmd-pins {
pins = "sdc1_cmd";
bias-pull-up;
drive-strength = <2>;
};
data-pins {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <2>;
};
};
sdc2_off: sdc2-off-state {
clk-pins {
pins = "sdc2_clk";
bias-disable;
drive-strength = <2>;
};
cmd-pins {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <2>;
};
data-pins {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <2>;
};
cd-pins {
pins = "gpio54";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
};
blsp1_uart2_default: blsp1-uart2-default-state {
rx-pins {
pins = "gpio5";
function = "blsp_uart2";
drive-strength = <2>;
bias-pull-up;
};
tx-pins {
pins = "gpio4";
function = "blsp_uart2";
drive-strength = <4>;
bias-disable;
};
};
blsp2_uart1_default: blsp2-uart1-default-state {
tx-rts-pins {
pins = "gpio41", "gpio44";
function = "blsp_uart7";
drive-strength = <2>;
bias-disable;
};
rx-cts-pins {
pins = "gpio42", "gpio43";
function = "blsp_uart7";
drive-strength = <2>;
bias-pull-up;
};
};
blsp2_uart1_sleep: blsp2-uart1-sleep-state {
pins = "gpio41", "gpio42", "gpio43", "gpio44";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
blsp2_uart4_default: blsp2-uart4-default-state {
tx-rts-pins {
pins = "gpio53", "gpio56";
function = "blsp_uart10";
drive-strength = <2>;
bias-disable;
};
rx-cts-pins {
pins = "gpio54", "gpio55";
function = "blsp_uart10";
drive-strength = <2>;
bias-pull-up;
};
};
blsp1_i2c1_default: blsp1-i2c1-default-state {
pins = "gpio2", "gpio3";
function = "blsp_i2c1";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c1_sleep: blsp1-i2c1-sleep-state {
pins = "gpio2", "gpio3";
function = "blsp_i2c1";
drive-strength = <2>;
bias-pull-up;
};
blsp1_i2c2_default: blsp1-i2c2-default-state {
pins = "gpio6", "gpio7";
function = "blsp_i2c2";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c2_sleep: blsp1-i2c2-sleep-state {
pins = "gpio6", "gpio7";
function = "blsp_i2c2";
drive-strength = <2>;
bias-pull-up;
};
blsp1_i2c3_default: blsp1-i2c3-default-state {
pins = "gpio10", "gpio11";
function = "blsp_i2c3";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
pins = "gpio10", "gpio11";
function = "blsp_i2c3";
drive-strength = <2>;
bias-pull-up;
};
/* BLSP1_I2C4 info is missing */
/* BLSP1_I2C5 info is missing */
blsp1_i2c6_default: blsp1-i2c6-default-state {
pins = "gpio29", "gpio30";
function = "blsp_i2c6";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
pins = "gpio29", "gpio30";
function = "blsp_i2c6";
drive-strength = <2>;
bias-pull-up;
};
/* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */
/* BLSP2_I2C1 info is missing */
blsp2_i2c2_default: blsp2-i2c2-default-state {
pins = "gpio47", "gpio48";
function = "blsp_i2c8";
drive-strength = <2>;
bias-disable;
};
blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
pins = "gpio47", "gpio48";
function = "blsp_i2c8";
drive-strength = <2>;
bias-pull-up;
};
/* BLSP2_I2C3 info is missing */
/* BLSP2_I2C4 info is missing */
blsp2_i2c5_default: blsp2-i2c5-default-state {
pins = "gpio83", "gpio84";
function = "blsp_i2c11";
drive-strength = <2>;
bias-disable;
};
blsp2_i2c5_sleep: blsp2-i2c5-sleep-state {
pins = "gpio83", "gpio84";
function = "blsp_i2c11";
drive-strength = <2>;
bias-pull-up;
};
blsp2_i2c6_default: blsp2-i2c6-default-state {
pins = "gpio87", "gpio88";
function = "blsp_i2c12";
drive-strength = <2>;
bias-disable;
};
blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
pins = "gpio87", "gpio88";
function = "blsp_i2c12";
drive-strength = <2>;
bias-pull-up;
};
cci_default: cci-default-state {
cci_i2c0_default: cci-i2c0-default-pins {
pins = "gpio19", "gpio20";
function = "cci_i2c0";
drive-strength = <2>;
bias-disable;
};
cci_i2c1_default: cci-i2c1-default-pins {
pins = "gpio21", "gpio22";
function = "cci_i2c1";
drive-strength = <2>;
bias-disable;
};
};
cci_sleep: cci-sleep-state {
cci_i2c0_sleep: cci-i2c0-sleep-pins {
pins = "gpio19", "gpio20";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
cci_i2c1_sleep: cci-i2c1-sleep-pins {
pins = "gpio21", "gpio22";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
};
spi8_default: spi8_default-state {
mosi-pins {
pins = "gpio45";
function = "blsp_spi8";
};
miso-pins {
pins = "gpio46";
function = "blsp_spi8";
};
cs-pins {
pins = "gpio47";
function = "blsp_spi8";
};
clk-pins {
pins = "gpio48";
function = "blsp_spi8";
};
};
};
mmcc: clock-controller@fd8c0000 {
compatible = "qcom,mmcc-msm8974";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
reg = <0xfd8c0000 0x6000>;
clocks = <&xo_board>,
<&gcc GCC_MMSS_GPLL0_CLK_SRC>,
<&gcc GPLL0_VOTE>,
<&gcc GPLL1_VOTE>,
<&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
<&mdss_dsi0_phy 1>,
<&mdss_dsi0_phy 0>,
<&mdss_dsi1_phy 1>,
<&mdss_dsi1_phy 0>,
<0>,
<0>,
<0>;
clock-names = "xo",
"mmss_gpll0_vote",
"gpll0_vote",
"gpll1_vote",
"gfx3d_clk_src",
"dsi0pll",
"dsi0pllbyte",
"dsi1pll",
"dsi1pllbyte",
"hdmipll",
"edp_link_clk",
"edp_vco_div";
};
mdss: display-subsystem@fd900000 {
compatible = "qcom,mdss";
reg = <0xfd900000 0x100>, <0xfd924000 0x1000>;
reg-names = "mdss_phys", "vbif_phys";
power-domains = <&mmcc MDSS_GDSC>;
clocks = <&mmcc MDSS_AHB_CLK>,
<&mmcc MDSS_AXI_CLK>,
<&mmcc MDSS_VSYNC_CLK>;
clock-names = "iface", "bus", "vsync";
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <1>;
ranges;
mdp: display-controller@fd900000 {
compatible = "qcom,msm8974-mdp5", "qcom,mdp5";
reg = <0xfd900100 0x22000>;
reg-names = "mdp_phys";
interrupt-parent = <&mdss>;
interrupts = <0>;
clocks = <&mmcc MDSS_AHB_CLK>,
<&mmcc MDSS_AXI_CLK>,
<&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_VSYNC_CLK>;
clock-names = "iface", "bus", "core", "vsync";
interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>;
interconnect-names = "mdp0-mem";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdp5_intf1_out: endpoint {
remote-endpoint = <&mdss_dsi0_in>;
};
};
port@1 {
reg = <1>;
mdp5_intf2_out: endpoint {
remote-endpoint = <&mdss_dsi1_in>;
};
};
};
};
mdss_dsi0: dsi@fd922800 {
compatible = "qcom,msm8974-dsi-ctrl",
"qcom,mdss-dsi-ctrl";
reg = <0xfd922800 0x1f8>;
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
interrupts = <4>;
assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
clocks = <&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_AHB_CLK>,
<&mmcc MDSS_AXI_CLK>,
<&mmcc MDSS_BYTE0_CLK>,
<&mmcc MDSS_PCLK0_CLK>,
<&mmcc MDSS_ESC0_CLK>,
<&mmcc MMSS_MISC_AHB_CLK>;
clock-names = "mdp_core",
"iface",
"bus",
"byte",
"pixel",
"core",
"core_mmss";
phys = <&mdss_dsi0_phy>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdss_dsi0_in: endpoint {
remote-endpoint = <&mdp5_intf1_out>;
};
};
port@1 {
reg = <1>;
mdss_dsi0_out: endpoint {
};
};
};
};
mdss_dsi0_phy: phy@fd922a00 {
compatible = "qcom,dsi-phy-28nm-hpm";
reg = <0xfd922a00 0xd4>,
<0xfd922b00 0x280>,
<0xfd922d80 0x30>;
reg-names = "dsi_pll",
"dsi_phy",
"dsi_phy_regulator";
#clock-cells = <1>;
#phy-cells = <0>;
clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
clock-names = "iface", "ref";
status = "disabled";
};
mdss_dsi1: dsi@fd922e00 {
compatible = "qcom,msm8974-dsi-ctrl",
"qcom,mdss-dsi-ctrl";
reg = <0xfd922e00 0x1f8>;
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
interrupts = <4>;
assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
clocks = <&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_AHB_CLK>,
<&mmcc MDSS_AXI_CLK>,
<&mmcc MDSS_BYTE1_CLK>,
<&mmcc MDSS_PCLK1_CLK>,
<&mmcc MDSS_ESC1_CLK>,
<&mmcc MMSS_MISC_AHB_CLK>;
clock-names = "mdp_core",
"iface",
"bus",
"byte",
"pixel",
"core",
"core_mmss";
phys = <&mdss_dsi1_phy>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdss_dsi1_in: endpoint {
remote-endpoint = <&mdp5_intf2_out>;
};
};
port@1 {
reg = <1>;
mdss_dsi1_out: endpoint {
};
};
};
};
mdss_dsi1_phy: phy@fd923000 {
compatible = "qcom,dsi-phy-28nm-hpm";
reg = <0xfd923000 0xd4>,
<0xfd923100 0x280>,
<0xfd923380 0x30>;
reg-names = "dsi_pll",
"dsi_phy",
"dsi_phy_regulator";
#clock-cells = <1>;
#phy-cells = <0>;
clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
clock-names = "iface", "ref";
status = "disabled";
};
};
cci: cci@fda0c000 {
compatible = "qcom,msm8974-cci";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xfda0c000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
<&mmcc CAMSS_CCI_CCI_AHB_CLK>,
<&mmcc CAMSS_CCI_CCI_CLK>;
clock-names = "camss_top_ahb",
"cci_ahb",
"cci";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cci_default>;
pinctrl-1 = <&cci_sleep>;
status = "disabled";
cci_i2c0: i2c-bus@0 {
reg = <0>;
clock-frequency = <100000>;
#address-cells = <1>;
#size-cells = <0>;
};
cci_i2c1: i2c-bus@1 {
reg = <1>;
clock-frequency = <100000>;
#address-cells = <1>;
#size-cells = <0>;
};
};
gpu: adreno@fdb00000 {
compatible = "qcom,adreno-330.1", "qcom,adreno";
reg = <0xfdb00000 0x10000>;
reg-names = "kgsl_3d0_reg_memory";
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "kgsl_3d0_irq";
clocks = <&mmcc OXILI_GFX3D_CLK>,
<&mmcc OXILICX_AHB_CLK>,
<&mmcc OXILICX_AXI_CLK>;
clock-names = "core", "iface", "mem_iface";
sram = <&gmu_sram>;
power-domains = <&mmcc OXILICX_GDSC>;
operating-points-v2 = <&gpu_opp_table>;
interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>,
<&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>;
interconnect-names = "gfx-mem", "ocmem";
// iommus = <&gpu_iommu 0>;
status = "disabled";
gpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-320000000 {
opp-hz = /bits/ 64 <320000000>;
};
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
};
opp-27000000 {
opp-hz = /bits/ 64 <27000000>;
};
};
};
sram@fdd00000 {
compatible = "qcom,msm8974-ocmem";
reg = <0xfdd00000 0x2000>,
<0xfec00000 0x180000>;
reg-names = "ctrl", "mem";
ranges = <0 0xfec00000 0x180000>;
clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
<&mmcc OCMEMCX_OCMEMNOC_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <1>;
gmu_sram: gmu-sram@0 {
reg = <0x0 0x100000>;
};
};
remoteproc_adsp: remoteproc@fe200000 {
compatible = "qcom,msm8974-adsp-pil";
reg = <0xfe200000 0x100>;
interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
clocks = <&xo_board>;
clock-names = "xo";
memory-region = <&adsp_region>;
qcom,smem-states = <&adsp_smp2p_out 0>;
qcom,smem-state-names = "stop";
status = "disabled";
smd-edge {
interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 8>;
qcom,smd-edge = <1>;
label = "lpass";
};
};
imem: sram@fe805000 {
compatible = "qcom,msm8974-imem", "syscon", "simple-mfd";
reg = <0xfe805000 0x1000>;
reboot-mode {
compatible = "syscon-reboot-mode";
offset = <0x65c>;
};
};
};
thermal-zones {
cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 5>;
trips {
cpu_alert0: trip0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit0: trip1 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 6>;
trips {
cpu_alert1: trip0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit1: trip1 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
cpu2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 7>;
trips {
cpu_alert2: trip0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit2: trip1 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
cpu3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 8>;
trips {
cpu_alert3: trip0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit3: trip1 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
q6-dsp-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 1>;
trips {
q6_dsp_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
modemtx-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 2>;
trips {
modemtx_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
video-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 3>;
trips {
video_alert0: trip-point0 {
temperature = <95000>;
hysteresis = <2000>;
type = "hot";
};
};
};
wlan-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 4>;
trips {
wlan_alert0: trip-point0 {
temperature = <105000>;
hysteresis = <2000>;
type = "hot";
};
};
};
gpu-top-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 9>;
trips {
gpu1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
gpu-bottom-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 10>;
trips {
gpu2_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 2 0xf08>,
<GIC_PPI 3 0xf08>,
<GIC_PPI 4 0xf08>,
<GIC_PPI 1 0xf08>;
clock-frequency = <19200000>;
};
vreg_boost: vreg-boost {
compatible = "regulator-fixed";
regulator-name = "vreg-boost";
regulator-min-microvolt = <3150000>;
regulator-max-microvolt = <3150000>;
regulator-always-on;
regulator-boot-on;
gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&boost_bypass_n_pin>;
};
vreg_vph_pwr: vreg-vph-pwr {
compatible = "regulator-fixed";
regulator-name = "vph-pwr";
regulator-min-microvolt = <3600000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
};
};