| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * drivers/net/phy/davicom.c |
| * |
| * Driver for Davicom PHYs |
| * |
| * Author: Andy Fleming |
| * |
| * Copyright (c) 2004 Freescale Semiconductor, Inc. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/errno.h> |
| #include <linux/unistd.h> |
| #include <linux/interrupt.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/spinlock.h> |
| #include <linux/mm.h> |
| #include <linux/module.h> |
| #include <linux/mii.h> |
| #include <linux/ethtool.h> |
| #include <linux/phy.h> |
| |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <linux/uaccess.h> |
| |
| #define MII_DM9161_SCR 0x10 |
| #define MII_DM9161_SCR_INIT 0x0610 |
| #define MII_DM9161_SCR_RMII 0x0100 |
| |
| /* DM9161 Interrupt Register */ |
| #define MII_DM9161_INTR 0x15 |
| #define MII_DM9161_INTR_PEND 0x8000 |
| #define MII_DM9161_INTR_DPLX_MASK 0x0800 |
| #define MII_DM9161_INTR_SPD_MASK 0x0400 |
| #define MII_DM9161_INTR_LINK_MASK 0x0200 |
| #define MII_DM9161_INTR_MASK 0x0100 |
| #define MII_DM9161_INTR_DPLX_CHANGE 0x0010 |
| #define MII_DM9161_INTR_SPD_CHANGE 0x0008 |
| #define MII_DM9161_INTR_LINK_CHANGE 0x0004 |
| #define MII_DM9161_INTR_INIT 0x0000 |
| #define MII_DM9161_INTR_STOP \ |
| (MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \ |
| | MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK) |
| |
| /* DM9161 10BT Configuration/Status */ |
| #define MII_DM9161_10BTCSR 0x12 |
| #define MII_DM9161_10BTCSR_INIT 0x7800 |
| |
| MODULE_DESCRIPTION("Davicom PHY driver"); |
| MODULE_AUTHOR("Andy Fleming"); |
| MODULE_LICENSE("GPL"); |
| |
| |
| #define DM9161_DELAY 1 |
| static int dm9161_config_intr(struct phy_device *phydev) |
| { |
| int temp; |
| |
| temp = phy_read(phydev, MII_DM9161_INTR); |
| |
| if (temp < 0) |
| return temp; |
| |
| if (PHY_INTERRUPT_ENABLED == phydev->interrupts) |
| temp &= ~(MII_DM9161_INTR_STOP); |
| else |
| temp |= MII_DM9161_INTR_STOP; |
| |
| temp = phy_write(phydev, MII_DM9161_INTR, temp); |
| |
| return temp; |
| } |
| |
| static int dm9161_config_aneg(struct phy_device *phydev) |
| { |
| int err; |
| |
| /* Isolate the PHY */ |
| err = phy_write(phydev, MII_BMCR, BMCR_ISOLATE); |
| |
| if (err < 0) |
| return err; |
| |
| /* Configure the new settings */ |
| err = genphy_config_aneg(phydev); |
| |
| if (err < 0) |
| return err; |
| |
| return 0; |
| } |
| |
| static int dm9161_config_init(struct phy_device *phydev) |
| { |
| int err, temp; |
| |
| /* Isolate the PHY */ |
| err = phy_write(phydev, MII_BMCR, BMCR_ISOLATE); |
| |
| if (err < 0) |
| return err; |
| |
| switch (phydev->interface) { |
| case PHY_INTERFACE_MODE_MII: |
| temp = MII_DM9161_SCR_INIT; |
| break; |
| case PHY_INTERFACE_MODE_RMII: |
| temp = MII_DM9161_SCR_INIT | MII_DM9161_SCR_RMII; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* Do not bypass the scrambler/descrambler */ |
| err = phy_write(phydev, MII_DM9161_SCR, temp); |
| if (err < 0) |
| return err; |
| |
| /* Clear 10BTCSR to default */ |
| err = phy_write(phydev, MII_DM9161_10BTCSR, MII_DM9161_10BTCSR_INIT); |
| |
| if (err < 0) |
| return err; |
| |
| /* Reconnect the PHY, and enable Autonegotiation */ |
| return phy_write(phydev, MII_BMCR, BMCR_ANENABLE); |
| } |
| |
| static int dm9161_ack_interrupt(struct phy_device *phydev) |
| { |
| int err = phy_read(phydev, MII_DM9161_INTR); |
| |
| return (err < 0) ? err : 0; |
| } |
| |
| static struct phy_driver dm91xx_driver[] = { |
| { |
| .phy_id = 0x0181b880, |
| .name = "Davicom DM9161E", |
| .phy_id_mask = 0x0ffffff0, |
| .features = PHY_BASIC_FEATURES, |
| .config_init = dm9161_config_init, |
| .config_aneg = dm9161_config_aneg, |
| .ack_interrupt = dm9161_ack_interrupt, |
| .config_intr = dm9161_config_intr, |
| }, { |
| .phy_id = 0x0181b8b0, |
| .name = "Davicom DM9161B/C", |
| .phy_id_mask = 0x0ffffff0, |
| .features = PHY_BASIC_FEATURES, |
| .config_init = dm9161_config_init, |
| .config_aneg = dm9161_config_aneg, |
| .ack_interrupt = dm9161_ack_interrupt, |
| .config_intr = dm9161_config_intr, |
| }, { |
| .phy_id = 0x0181b8a0, |
| .name = "Davicom DM9161A", |
| .phy_id_mask = 0x0ffffff0, |
| .features = PHY_BASIC_FEATURES, |
| .config_init = dm9161_config_init, |
| .config_aneg = dm9161_config_aneg, |
| .ack_interrupt = dm9161_ack_interrupt, |
| .config_intr = dm9161_config_intr, |
| }, { |
| .phy_id = 0x00181b80, |
| .name = "Davicom DM9131", |
| .phy_id_mask = 0x0ffffff0, |
| .features = PHY_BASIC_FEATURES, |
| .ack_interrupt = dm9161_ack_interrupt, |
| .config_intr = dm9161_config_intr, |
| } }; |
| |
| module_phy_driver(dm91xx_driver); |
| |
| static struct mdio_device_id __maybe_unused davicom_tbl[] = { |
| { 0x0181b880, 0x0ffffff0 }, |
| { 0x0181b8b0, 0x0ffffff0 }, |
| { 0x0181b8a0, 0x0ffffff0 }, |
| { 0x00181b80, 0x0ffffff0 }, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(mdio, davicom_tbl); |