| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * System Control and Management Interface (SCMI) Message Protocol driver |
| * |
| * SCMI Message Protocol is used between the System Control Processor(SCP) |
| * and the Application Processors(AP). The Message Handling Unit(MHU) |
| * provides a mechanism for inter-processor communication between SCP's |
| * Cortex M3 and AP. |
| * |
| * SCP offers control and management of the core/cluster power states, |
| * various power domain DVFS including the core/cluster, certain system |
| * clocks configuration, thermal sensors and many others. |
| * |
| * Copyright (C) 2018 ARM Ltd. |
| */ |
| |
| #include <linux/bitmap.h> |
| #include <linux/export.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/ktime.h> |
| #include <linux/module.h> |
| #include <linux/of_address.h> |
| #include <linux/of_device.h> |
| #include <linux/processor.h> |
| #include <linux/slab.h> |
| |
| #include "common.h" |
| |
| #define CREATE_TRACE_POINTS |
| #include <trace/events/scmi.h> |
| |
| enum scmi_error_codes { |
| SCMI_SUCCESS = 0, /* Success */ |
| SCMI_ERR_SUPPORT = -1, /* Not supported */ |
| SCMI_ERR_PARAMS = -2, /* Invalid Parameters */ |
| SCMI_ERR_ACCESS = -3, /* Invalid access/permission denied */ |
| SCMI_ERR_ENTRY = -4, /* Not found */ |
| SCMI_ERR_RANGE = -5, /* Value out of range */ |
| SCMI_ERR_BUSY = -6, /* Device busy */ |
| SCMI_ERR_COMMS = -7, /* Communication Error */ |
| SCMI_ERR_GENERIC = -8, /* Generic Error */ |
| SCMI_ERR_HARDWARE = -9, /* Hardware Error */ |
| SCMI_ERR_PROTOCOL = -10,/* Protocol Error */ |
| SCMI_ERR_MAX |
| }; |
| |
| /* List of all SCMI devices active in system */ |
| static LIST_HEAD(scmi_list); |
| /* Protection for the entire list */ |
| static DEFINE_MUTEX(scmi_list_mutex); |
| /* Track the unique id for the transfers for debug & profiling purpose */ |
| static atomic_t transfer_last_id; |
| |
| /** |
| * struct scmi_xfers_info - Structure to manage transfer information |
| * |
| * @xfer_block: Preallocated Message array |
| * @xfer_alloc_table: Bitmap table for allocated messages. |
| * Index of this bitmap table is also used for message |
| * sequence identifier. |
| * @xfer_lock: Protection for message allocation |
| */ |
| struct scmi_xfers_info { |
| struct scmi_xfer *xfer_block; |
| unsigned long *xfer_alloc_table; |
| spinlock_t xfer_lock; |
| }; |
| |
| /** |
| * struct scmi_info - Structure representing a SCMI instance |
| * |
| * @dev: Device pointer |
| * @desc: SoC description for this instance |
| * @version: SCMI revision information containing protocol version, |
| * implementation version and (sub-)vendor identification. |
| * @handle: Instance of SCMI handle to send to clients |
| * @tx_minfo: Universal Transmit Message management info |
| * @rx_minfo: Universal Receive Message management info |
| * @tx_idr: IDR object to map protocol id to Tx channel info pointer |
| * @rx_idr: IDR object to map protocol id to Rx channel info pointer |
| * @protocols_imp: List of protocols implemented, currently maximum of |
| * MAX_PROTOCOLS_IMP elements allocated by the base protocol |
| * @node: List head |
| * @users: Number of users of this instance |
| */ |
| struct scmi_info { |
| struct device *dev; |
| const struct scmi_desc *desc; |
| struct scmi_revision_info version; |
| struct scmi_handle handle; |
| struct scmi_xfers_info tx_minfo; |
| struct scmi_xfers_info rx_minfo; |
| struct idr tx_idr; |
| struct idr rx_idr; |
| u8 *protocols_imp; |
| struct list_head node; |
| int users; |
| }; |
| |
| #define handle_to_scmi_info(h) container_of(h, struct scmi_info, handle) |
| |
| static const int scmi_linux_errmap[] = { |
| /* better than switch case as long as return value is continuous */ |
| 0, /* SCMI_SUCCESS */ |
| -EOPNOTSUPP, /* SCMI_ERR_SUPPORT */ |
| -EINVAL, /* SCMI_ERR_PARAM */ |
| -EACCES, /* SCMI_ERR_ACCESS */ |
| -ENOENT, /* SCMI_ERR_ENTRY */ |
| -ERANGE, /* SCMI_ERR_RANGE */ |
| -EBUSY, /* SCMI_ERR_BUSY */ |
| -ECOMM, /* SCMI_ERR_COMMS */ |
| -EIO, /* SCMI_ERR_GENERIC */ |
| -EREMOTEIO, /* SCMI_ERR_HARDWARE */ |
| -EPROTO, /* SCMI_ERR_PROTOCOL */ |
| }; |
| |
| static inline int scmi_to_linux_errno(int errno) |
| { |
| if (errno < SCMI_SUCCESS && errno > SCMI_ERR_MAX) |
| return scmi_linux_errmap[-errno]; |
| return -EIO; |
| } |
| |
| /** |
| * scmi_dump_header_dbg() - Helper to dump a message header. |
| * |
| * @dev: Device pointer corresponding to the SCMI entity |
| * @hdr: pointer to header. |
| */ |
| static inline void scmi_dump_header_dbg(struct device *dev, |
| struct scmi_msg_hdr *hdr) |
| { |
| dev_dbg(dev, "Message ID: %x Sequence ID: %x Protocol: %x\n", |
| hdr->id, hdr->seq, hdr->protocol_id); |
| } |
| |
| /** |
| * scmi_xfer_get() - Allocate one message |
| * |
| * @handle: Pointer to SCMI entity handle |
| * @minfo: Pointer to Tx/Rx Message management info based on channel type |
| * |
| * Helper function which is used by various message functions that are |
| * exposed to clients of this driver for allocating a message traffic event. |
| * |
| * This function can sleep depending on pending requests already in the system |
| * for the SCMI entity. Further, this also holds a spinlock to maintain |
| * integrity of internal data structures. |
| * |
| * Return: 0 if all went fine, else corresponding error. |
| */ |
| static struct scmi_xfer *scmi_xfer_get(const struct scmi_handle *handle, |
| struct scmi_xfers_info *minfo) |
| { |
| u16 xfer_id; |
| struct scmi_xfer *xfer; |
| unsigned long flags, bit_pos; |
| struct scmi_info *info = handle_to_scmi_info(handle); |
| |
| /* Keep the locked section as small as possible */ |
| spin_lock_irqsave(&minfo->xfer_lock, flags); |
| bit_pos = find_first_zero_bit(minfo->xfer_alloc_table, |
| info->desc->max_msg); |
| if (bit_pos == info->desc->max_msg) { |
| spin_unlock_irqrestore(&minfo->xfer_lock, flags); |
| return ERR_PTR(-ENOMEM); |
| } |
| set_bit(bit_pos, minfo->xfer_alloc_table); |
| spin_unlock_irqrestore(&minfo->xfer_lock, flags); |
| |
| xfer_id = bit_pos; |
| |
| xfer = &minfo->xfer_block[xfer_id]; |
| xfer->hdr.seq = xfer_id; |
| reinit_completion(&xfer->done); |
| xfer->transfer_id = atomic_inc_return(&transfer_last_id); |
| |
| return xfer; |
| } |
| |
| /** |
| * __scmi_xfer_put() - Release a message |
| * |
| * @minfo: Pointer to Tx/Rx Message management info based on channel type |
| * @xfer: message that was reserved by scmi_xfer_get |
| * |
| * This holds a spinlock to maintain integrity of internal data structures. |
| */ |
| static void |
| __scmi_xfer_put(struct scmi_xfers_info *minfo, struct scmi_xfer *xfer) |
| { |
| unsigned long flags; |
| |
| /* |
| * Keep the locked section as small as possible |
| * NOTE: we might escape with smp_mb and no lock here.. |
| * but just be conservative and symmetric. |
| */ |
| spin_lock_irqsave(&minfo->xfer_lock, flags); |
| clear_bit(xfer->hdr.seq, minfo->xfer_alloc_table); |
| spin_unlock_irqrestore(&minfo->xfer_lock, flags); |
| } |
| |
| static void scmi_handle_notification(struct scmi_chan_info *cinfo, u32 msg_hdr) |
| { |
| struct scmi_xfer *xfer; |
| struct device *dev = cinfo->dev; |
| struct scmi_info *info = handle_to_scmi_info(cinfo->handle); |
| struct scmi_xfers_info *minfo = &info->rx_minfo; |
| |
| xfer = scmi_xfer_get(cinfo->handle, minfo); |
| if (IS_ERR(xfer)) { |
| dev_err(dev, "failed to get free message slot (%ld)\n", |
| PTR_ERR(xfer)); |
| info->desc->ops->clear_channel(cinfo); |
| return; |
| } |
| |
| unpack_scmi_header(msg_hdr, &xfer->hdr); |
| scmi_dump_header_dbg(dev, &xfer->hdr); |
| info->desc->ops->fetch_notification(cinfo, info->desc->max_msg_size, |
| xfer); |
| |
| trace_scmi_rx_done(xfer->transfer_id, xfer->hdr.id, |
| xfer->hdr.protocol_id, xfer->hdr.seq, |
| MSG_TYPE_NOTIFICATION); |
| |
| __scmi_xfer_put(minfo, xfer); |
| |
| info->desc->ops->clear_channel(cinfo); |
| } |
| |
| static void scmi_handle_response(struct scmi_chan_info *cinfo, |
| u16 xfer_id, u8 msg_type) |
| { |
| struct scmi_xfer *xfer; |
| struct device *dev = cinfo->dev; |
| struct scmi_info *info = handle_to_scmi_info(cinfo->handle); |
| struct scmi_xfers_info *minfo = &info->tx_minfo; |
| |
| /* Are we even expecting this? */ |
| if (!test_bit(xfer_id, minfo->xfer_alloc_table)) { |
| dev_err(dev, "message for %d is not expected!\n", xfer_id); |
| info->desc->ops->clear_channel(cinfo); |
| return; |
| } |
| |
| xfer = &minfo->xfer_block[xfer_id]; |
| /* |
| * Even if a response was indeed expected on this slot at this point, |
| * a buggy platform could wrongly reply feeding us an unexpected |
| * delayed response we're not prepared to handle: bail-out safely |
| * blaming firmware. |
| */ |
| if (unlikely(msg_type == MSG_TYPE_DELAYED_RESP && !xfer->async_done)) { |
| dev_err(dev, |
| "Delayed Response for %d not expected! Buggy F/W ?\n", |
| xfer_id); |
| info->desc->ops->clear_channel(cinfo); |
| /* It was unexpected, so nobody will clear the xfer if not us */ |
| __scmi_xfer_put(minfo, xfer); |
| return; |
| } |
| |
| scmi_dump_header_dbg(dev, &xfer->hdr); |
| |
| info->desc->ops->fetch_response(cinfo, xfer); |
| |
| trace_scmi_rx_done(xfer->transfer_id, xfer->hdr.id, |
| xfer->hdr.protocol_id, xfer->hdr.seq, |
| msg_type); |
| |
| if (msg_type == MSG_TYPE_DELAYED_RESP) { |
| info->desc->ops->clear_channel(cinfo); |
| complete(xfer->async_done); |
| } else { |
| complete(&xfer->done); |
| } |
| } |
| |
| /** |
| * scmi_rx_callback() - callback for receiving messages |
| * |
| * @cinfo: SCMI channel info |
| * @msg_hdr: Message header |
| * |
| * Processes one received message to appropriate transfer information and |
| * signals completion of the transfer. |
| * |
| * NOTE: This function will be invoked in IRQ context, hence should be |
| * as optimal as possible. |
| */ |
| void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr) |
| { |
| u16 xfer_id = MSG_XTRACT_TOKEN(msg_hdr); |
| u8 msg_type = MSG_XTRACT_TYPE(msg_hdr); |
| |
| switch (msg_type) { |
| case MSG_TYPE_NOTIFICATION: |
| scmi_handle_notification(cinfo, msg_hdr); |
| break; |
| case MSG_TYPE_COMMAND: |
| case MSG_TYPE_DELAYED_RESP: |
| scmi_handle_response(cinfo, xfer_id, msg_type); |
| break; |
| default: |
| WARN_ONCE(1, "received unknown msg_type:%d\n", msg_type); |
| break; |
| } |
| } |
| |
| /** |
| * scmi_xfer_put() - Release a transmit message |
| * |
| * @handle: Pointer to SCMI entity handle |
| * @xfer: message that was reserved by scmi_xfer_get |
| */ |
| void scmi_xfer_put(const struct scmi_handle *handle, struct scmi_xfer *xfer) |
| { |
| struct scmi_info *info = handle_to_scmi_info(handle); |
| |
| __scmi_xfer_put(&info->tx_minfo, xfer); |
| } |
| |
| #define SCMI_MAX_POLL_TO_NS (100 * NSEC_PER_USEC) |
| |
| static bool scmi_xfer_done_no_timeout(struct scmi_chan_info *cinfo, |
| struct scmi_xfer *xfer, ktime_t stop) |
| { |
| struct scmi_info *info = handle_to_scmi_info(cinfo->handle); |
| |
| return info->desc->ops->poll_done(cinfo, xfer) || |
| ktime_after(ktime_get(), stop); |
| } |
| |
| /** |
| * scmi_do_xfer() - Do one transfer |
| * |
| * @handle: Pointer to SCMI entity handle |
| * @xfer: Transfer to initiate and wait for response |
| * |
| * Return: -ETIMEDOUT in case of no response, if transmit error, |
| * return corresponding error, else if all goes well, |
| * return 0. |
| */ |
| int scmi_do_xfer(const struct scmi_handle *handle, struct scmi_xfer *xfer) |
| { |
| int ret; |
| int timeout; |
| struct scmi_info *info = handle_to_scmi_info(handle); |
| struct device *dev = info->dev; |
| struct scmi_chan_info *cinfo; |
| |
| cinfo = idr_find(&info->tx_idr, xfer->hdr.protocol_id); |
| if (unlikely(!cinfo)) |
| return -EINVAL; |
| |
| trace_scmi_xfer_begin(xfer->transfer_id, xfer->hdr.id, |
| xfer->hdr.protocol_id, xfer->hdr.seq, |
| xfer->hdr.poll_completion); |
| |
| ret = info->desc->ops->send_message(cinfo, xfer); |
| if (ret < 0) { |
| dev_dbg(dev, "Failed to send message %d\n", ret); |
| return ret; |
| } |
| |
| if (xfer->hdr.poll_completion) { |
| ktime_t stop = ktime_add_ns(ktime_get(), SCMI_MAX_POLL_TO_NS); |
| |
| spin_until_cond(scmi_xfer_done_no_timeout(cinfo, xfer, stop)); |
| |
| if (ktime_before(ktime_get(), stop)) |
| info->desc->ops->fetch_response(cinfo, xfer); |
| else |
| ret = -ETIMEDOUT; |
| } else { |
| /* And we wait for the response. */ |
| timeout = msecs_to_jiffies(info->desc->max_rx_timeout_ms); |
| if (!wait_for_completion_timeout(&xfer->done, timeout)) { |
| dev_err(dev, "timed out in resp(caller: %pS)\n", |
| (void *)_RET_IP_); |
| ret = -ETIMEDOUT; |
| } |
| } |
| |
| if (!ret && xfer->hdr.status) |
| ret = scmi_to_linux_errno(xfer->hdr.status); |
| |
| if (info->desc->ops->mark_txdone) |
| info->desc->ops->mark_txdone(cinfo, ret); |
| |
| trace_scmi_xfer_end(xfer->transfer_id, xfer->hdr.id, |
| xfer->hdr.protocol_id, xfer->hdr.seq, |
| xfer->hdr.status); |
| |
| return ret; |
| } |
| |
| #define SCMI_MAX_RESPONSE_TIMEOUT (2 * MSEC_PER_SEC) |
| |
| /** |
| * scmi_do_xfer_with_response() - Do one transfer and wait until the delayed |
| * response is received |
| * |
| * @handle: Pointer to SCMI entity handle |
| * @xfer: Transfer to initiate and wait for response |
| * |
| * Return: -ETIMEDOUT in case of no delayed response, if transmit error, |
| * return corresponding error, else if all goes well, return 0. |
| */ |
| int scmi_do_xfer_with_response(const struct scmi_handle *handle, |
| struct scmi_xfer *xfer) |
| { |
| int ret, timeout = msecs_to_jiffies(SCMI_MAX_RESPONSE_TIMEOUT); |
| DECLARE_COMPLETION_ONSTACK(async_response); |
| |
| xfer->async_done = &async_response; |
| |
| ret = scmi_do_xfer(handle, xfer); |
| if (!ret && !wait_for_completion_timeout(xfer->async_done, timeout)) |
| ret = -ETIMEDOUT; |
| |
| xfer->async_done = NULL; |
| return ret; |
| } |
| |
| /** |
| * scmi_xfer_get_init() - Allocate and initialise one message for transmit |
| * |
| * @handle: Pointer to SCMI entity handle |
| * @msg_id: Message identifier |
| * @prot_id: Protocol identifier for the message |
| * @tx_size: transmit message size |
| * @rx_size: receive message size |
| * @p: pointer to the allocated and initialised message |
| * |
| * This function allocates the message using @scmi_xfer_get and |
| * initialise the header. |
| * |
| * Return: 0 if all went fine with @p pointing to message, else |
| * corresponding error. |
| */ |
| int scmi_xfer_get_init(const struct scmi_handle *handle, u8 msg_id, u8 prot_id, |
| size_t tx_size, size_t rx_size, struct scmi_xfer **p) |
| { |
| int ret; |
| struct scmi_xfer *xfer; |
| struct scmi_info *info = handle_to_scmi_info(handle); |
| struct scmi_xfers_info *minfo = &info->tx_minfo; |
| struct device *dev = info->dev; |
| |
| /* Ensure we have sane transfer sizes */ |
| if (rx_size > info->desc->max_msg_size || |
| tx_size > info->desc->max_msg_size) |
| return -ERANGE; |
| |
| xfer = scmi_xfer_get(handle, minfo); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| dev_err(dev, "failed to get free message slot(%d)\n", ret); |
| return ret; |
| } |
| |
| xfer->tx.len = tx_size; |
| xfer->rx.len = rx_size ? : info->desc->max_msg_size; |
| xfer->hdr.id = msg_id; |
| xfer->hdr.protocol_id = prot_id; |
| xfer->hdr.poll_completion = false; |
| |
| *p = xfer; |
| |
| return 0; |
| } |
| |
| /** |
| * scmi_version_get() - command to get the revision of the SCMI entity |
| * |
| * @handle: Pointer to SCMI entity handle |
| * @protocol: Protocol identifier for the message |
| * @version: Holds returned version of protocol. |
| * |
| * Updates the SCMI information in the internal data structure. |
| * |
| * Return: 0 if all went fine, else return appropriate error. |
| */ |
| int scmi_version_get(const struct scmi_handle *handle, u8 protocol, |
| u32 *version) |
| { |
| int ret; |
| __le32 *rev_info; |
| struct scmi_xfer *t; |
| |
| ret = scmi_xfer_get_init(handle, PROTOCOL_VERSION, protocol, 0, |
| sizeof(*version), &t); |
| if (ret) |
| return ret; |
| |
| ret = scmi_do_xfer(handle, t); |
| if (!ret) { |
| rev_info = t->rx.buf; |
| *version = le32_to_cpu(*rev_info); |
| } |
| |
| scmi_xfer_put(handle, t); |
| return ret; |
| } |
| |
| void scmi_setup_protocol_implemented(const struct scmi_handle *handle, |
| u8 *prot_imp) |
| { |
| struct scmi_info *info = handle_to_scmi_info(handle); |
| |
| info->protocols_imp = prot_imp; |
| } |
| |
| static bool |
| scmi_is_protocol_implemented(const struct scmi_handle *handle, u8 prot_id) |
| { |
| int i; |
| struct scmi_info *info = handle_to_scmi_info(handle); |
| |
| if (!info->protocols_imp) |
| return false; |
| |
| for (i = 0; i < MAX_PROTOCOLS_IMP; i++) |
| if (info->protocols_imp[i] == prot_id) |
| return true; |
| return false; |
| } |
| |
| /** |
| * scmi_handle_get() - Get the SCMI handle for a device |
| * |
| * @dev: pointer to device for which we want SCMI handle |
| * |
| * NOTE: The function does not track individual clients of the framework |
| * and is expected to be maintained by caller of SCMI protocol library. |
| * scmi_handle_put must be balanced with successful scmi_handle_get |
| * |
| * Return: pointer to handle if successful, NULL on error |
| */ |
| struct scmi_handle *scmi_handle_get(struct device *dev) |
| { |
| struct list_head *p; |
| struct scmi_info *info; |
| struct scmi_handle *handle = NULL; |
| |
| mutex_lock(&scmi_list_mutex); |
| list_for_each(p, &scmi_list) { |
| info = list_entry(p, struct scmi_info, node); |
| if (dev->parent == info->dev) { |
| handle = &info->handle; |
| info->users++; |
| break; |
| } |
| } |
| mutex_unlock(&scmi_list_mutex); |
| |
| return handle; |
| } |
| |
| /** |
| * scmi_handle_put() - Release the handle acquired by scmi_handle_get |
| * |
| * @handle: handle acquired by scmi_handle_get |
| * |
| * NOTE: The function does not track individual clients of the framework |
| * and is expected to be maintained by caller of SCMI protocol library. |
| * scmi_handle_put must be balanced with successful scmi_handle_get |
| * |
| * Return: 0 is successfully released |
| * if null was passed, it returns -EINVAL; |
| */ |
| int scmi_handle_put(const struct scmi_handle *handle) |
| { |
| struct scmi_info *info; |
| |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_scmi_info(handle); |
| mutex_lock(&scmi_list_mutex); |
| if (!WARN_ON(!info->users)) |
| info->users--; |
| mutex_unlock(&scmi_list_mutex); |
| |
| return 0; |
| } |
| |
| static int __scmi_xfer_info_init(struct scmi_info *sinfo, |
| struct scmi_xfers_info *info) |
| { |
| int i; |
| struct scmi_xfer *xfer; |
| struct device *dev = sinfo->dev; |
| const struct scmi_desc *desc = sinfo->desc; |
| |
| /* Pre-allocated messages, no more than what hdr.seq can support */ |
| if (WARN_ON(desc->max_msg >= MSG_TOKEN_MAX)) { |
| dev_err(dev, "Maximum message of %d exceeds supported %ld\n", |
| desc->max_msg, MSG_TOKEN_MAX); |
| return -EINVAL; |
| } |
| |
| info->xfer_block = devm_kcalloc(dev, desc->max_msg, |
| sizeof(*info->xfer_block), GFP_KERNEL); |
| if (!info->xfer_block) |
| return -ENOMEM; |
| |
| info->xfer_alloc_table = devm_kcalloc(dev, BITS_TO_LONGS(desc->max_msg), |
| sizeof(long), GFP_KERNEL); |
| if (!info->xfer_alloc_table) |
| return -ENOMEM; |
| |
| /* Pre-initialize the buffer pointer to pre-allocated buffers */ |
| for (i = 0, xfer = info->xfer_block; i < desc->max_msg; i++, xfer++) { |
| xfer->rx.buf = devm_kcalloc(dev, sizeof(u8), desc->max_msg_size, |
| GFP_KERNEL); |
| if (!xfer->rx.buf) |
| return -ENOMEM; |
| |
| xfer->tx.buf = xfer->rx.buf; |
| init_completion(&xfer->done); |
| } |
| |
| spin_lock_init(&info->xfer_lock); |
| |
| return 0; |
| } |
| |
| static int scmi_xfer_info_init(struct scmi_info *sinfo) |
| { |
| int ret = __scmi_xfer_info_init(sinfo, &sinfo->tx_minfo); |
| |
| if (!ret && idr_find(&sinfo->rx_idr, SCMI_PROTOCOL_BASE)) |
| ret = __scmi_xfer_info_init(sinfo, &sinfo->rx_minfo); |
| |
| return ret; |
| } |
| |
| static int scmi_chan_setup(struct scmi_info *info, struct device *dev, |
| int prot_id, bool tx) |
| { |
| int ret, idx; |
| struct scmi_chan_info *cinfo; |
| struct idr *idr; |
| |
| /* Transmit channel is first entry i.e. index 0 */ |
| idx = tx ? 0 : 1; |
| idr = tx ? &info->tx_idr : &info->rx_idr; |
| |
| /* check if already allocated, used for multiple device per protocol */ |
| cinfo = idr_find(idr, prot_id); |
| if (cinfo) |
| return 0; |
| |
| if (!info->desc->ops->chan_available(dev, idx)) { |
| cinfo = idr_find(idr, SCMI_PROTOCOL_BASE); |
| if (unlikely(!cinfo)) /* Possible only if platform has no Rx */ |
| return -EINVAL; |
| goto idr_alloc; |
| } |
| |
| cinfo = devm_kzalloc(info->dev, sizeof(*cinfo), GFP_KERNEL); |
| if (!cinfo) |
| return -ENOMEM; |
| |
| cinfo->dev = dev; |
| |
| ret = info->desc->ops->chan_setup(cinfo, info->dev, tx); |
| if (ret) |
| return ret; |
| |
| idr_alloc: |
| ret = idr_alloc(idr, cinfo, prot_id, prot_id + 1, GFP_KERNEL); |
| if (ret != prot_id) { |
| dev_err(dev, "unable to allocate SCMI idr slot err %d\n", ret); |
| return ret; |
| } |
| |
| cinfo->handle = &info->handle; |
| return 0; |
| } |
| |
| static inline int |
| scmi_txrx_setup(struct scmi_info *info, struct device *dev, int prot_id) |
| { |
| int ret = scmi_chan_setup(info, dev, prot_id, true); |
| |
| if (!ret) /* Rx is optional, hence no error check */ |
| scmi_chan_setup(info, dev, prot_id, false); |
| |
| return ret; |
| } |
| |
| static inline void |
| scmi_create_protocol_device(struct device_node *np, struct scmi_info *info, |
| int prot_id, const char *name) |
| { |
| struct scmi_device *sdev; |
| |
| sdev = scmi_device_create(np, info->dev, prot_id, name); |
| if (!sdev) { |
| dev_err(info->dev, "failed to create %d protocol device\n", |
| prot_id); |
| return; |
| } |
| |
| if (scmi_txrx_setup(info, &sdev->dev, prot_id)) { |
| dev_err(&sdev->dev, "failed to setup transport\n"); |
| scmi_device_destroy(sdev); |
| return; |
| } |
| |
| /* setup handle now as the transport is ready */ |
| scmi_set_handle(sdev); |
| } |
| |
| #define MAX_SCMI_DEV_PER_PROTOCOL 2 |
| struct scmi_prot_devnames { |
| int protocol_id; |
| char *names[MAX_SCMI_DEV_PER_PROTOCOL]; |
| }; |
| |
| static struct scmi_prot_devnames devnames[] = { |
| { SCMI_PROTOCOL_POWER, { "genpd" },}, |
| { SCMI_PROTOCOL_PERF, { "cpufreq" },}, |
| { SCMI_PROTOCOL_CLOCK, { "clocks" },}, |
| { SCMI_PROTOCOL_SENSOR, { "hwmon" },}, |
| { SCMI_PROTOCOL_RESET, { "reset" },}, |
| }; |
| |
| static inline void |
| scmi_create_protocol_devices(struct device_node *np, struct scmi_info *info, |
| int prot_id) |
| { |
| int loop, cnt; |
| |
| for (loop = 0; loop < ARRAY_SIZE(devnames); loop++) { |
| if (devnames[loop].protocol_id != prot_id) |
| continue; |
| |
| for (cnt = 0; cnt < ARRAY_SIZE(devnames[loop].names); cnt++) { |
| const char *name = devnames[loop].names[cnt]; |
| |
| if (name) |
| scmi_create_protocol_device(np, info, prot_id, |
| name); |
| } |
| } |
| } |
| |
| static int scmi_probe(struct platform_device *pdev) |
| { |
| int ret; |
| struct scmi_handle *handle; |
| const struct scmi_desc *desc; |
| struct scmi_info *info; |
| struct device *dev = &pdev->dev; |
| struct device_node *child, *np = dev->of_node; |
| |
| desc = of_device_get_match_data(dev); |
| if (!desc) |
| return -EINVAL; |
| |
| info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); |
| if (!info) |
| return -ENOMEM; |
| |
| info->dev = dev; |
| info->desc = desc; |
| INIT_LIST_HEAD(&info->node); |
| |
| platform_set_drvdata(pdev, info); |
| idr_init(&info->tx_idr); |
| idr_init(&info->rx_idr); |
| |
| handle = &info->handle; |
| handle->dev = info->dev; |
| handle->version = &info->version; |
| |
| ret = scmi_txrx_setup(info, dev, SCMI_PROTOCOL_BASE); |
| if (ret) |
| return ret; |
| |
| ret = scmi_xfer_info_init(info); |
| if (ret) |
| return ret; |
| |
| ret = scmi_base_protocol_init(handle); |
| if (ret) { |
| dev_err(dev, "unable to communicate with SCMI(%d)\n", ret); |
| return ret; |
| } |
| |
| mutex_lock(&scmi_list_mutex); |
| list_add_tail(&info->node, &scmi_list); |
| mutex_unlock(&scmi_list_mutex); |
| |
| for_each_available_child_of_node(np, child) { |
| u32 prot_id; |
| |
| if (of_property_read_u32(child, "reg", &prot_id)) |
| continue; |
| |
| if (!FIELD_FIT(MSG_PROTOCOL_ID_MASK, prot_id)) |
| dev_err(dev, "Out of range protocol %d\n", prot_id); |
| |
| if (!scmi_is_protocol_implemented(handle, prot_id)) { |
| dev_err(dev, "SCMI protocol %d not implemented\n", |
| prot_id); |
| continue; |
| } |
| |
| scmi_create_protocol_devices(child, info, prot_id); |
| } |
| |
| return 0; |
| } |
| |
| void scmi_free_channel(struct scmi_chan_info *cinfo, struct idr *idr, int id) |
| { |
| idr_remove(idr, id); |
| } |
| |
| static int scmi_remove(struct platform_device *pdev) |
| { |
| int ret = 0; |
| struct scmi_info *info = platform_get_drvdata(pdev); |
| struct idr *idr = &info->tx_idr; |
| |
| mutex_lock(&scmi_list_mutex); |
| if (info->users) |
| ret = -EBUSY; |
| else |
| list_del(&info->node); |
| mutex_unlock(&scmi_list_mutex); |
| |
| if (ret) |
| return ret; |
| |
| /* Safe to free channels since no more users */ |
| ret = idr_for_each(idr, info->desc->ops->chan_free, idr); |
| idr_destroy(&info->tx_idr); |
| |
| idr = &info->rx_idr; |
| ret = idr_for_each(idr, info->desc->ops->chan_free, idr); |
| idr_destroy(&info->rx_idr); |
| |
| return ret; |
| } |
| |
| static ssize_t protocol_version_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct scmi_info *info = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%u.%u\n", info->version.major_ver, |
| info->version.minor_ver); |
| } |
| static DEVICE_ATTR_RO(protocol_version); |
| |
| static ssize_t firmware_version_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct scmi_info *info = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "0x%x\n", info->version.impl_ver); |
| } |
| static DEVICE_ATTR_RO(firmware_version); |
| |
| static ssize_t vendor_id_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct scmi_info *info = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%s\n", info->version.vendor_id); |
| } |
| static DEVICE_ATTR_RO(vendor_id); |
| |
| static ssize_t sub_vendor_id_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct scmi_info *info = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%s\n", info->version.sub_vendor_id); |
| } |
| static DEVICE_ATTR_RO(sub_vendor_id); |
| |
| static struct attribute *versions_attrs[] = { |
| &dev_attr_firmware_version.attr, |
| &dev_attr_protocol_version.attr, |
| &dev_attr_vendor_id.attr, |
| &dev_attr_sub_vendor_id.attr, |
| NULL, |
| }; |
| ATTRIBUTE_GROUPS(versions); |
| |
| /* Each compatible listed below must have descriptor associated with it */ |
| static const struct of_device_id scmi_of_match[] = { |
| { .compatible = "arm,scmi", .data = &scmi_mailbox_desc }, |
| #ifdef CONFIG_ARM_PSCI_FW |
| { .compatible = "arm,scmi-smc", .data = &scmi_smc_desc}, |
| #endif |
| { /* Sentinel */ }, |
| }; |
| |
| MODULE_DEVICE_TABLE(of, scmi_of_match); |
| |
| static struct platform_driver scmi_driver = { |
| .driver = { |
| .name = "arm-scmi", |
| .of_match_table = scmi_of_match, |
| .dev_groups = versions_groups, |
| }, |
| .probe = scmi_probe, |
| .remove = scmi_remove, |
| }; |
| |
| module_platform_driver(scmi_driver); |
| |
| MODULE_ALIAS("platform: arm-scmi"); |
| MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>"); |
| MODULE_DESCRIPTION("ARM SCMI protocol driver"); |
| MODULE_LICENSE("GPL v2"); |